From: Thomas Abraham Date: Wed, 6 Mar 2013 11:36:16 +0000 (+0530) Subject: mmc: sdhci-s3c: let device core setup the default pin configuration X-Git-Tag: firefly_0821_release~3680^2~578^2~49 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=e19499ae10903;p=firefly-linux-kernel-4.4.55.git mmc: sdhci-s3c: let device core setup the default pin configuration With device core now able to setup the default pin configuration, the call to devm_pinctrl_get_select_default can be removed. And the pin configuration code based on the deprecated Samsung specific gpio bindings is also removed. Signed-off-by: Thomas Abraham Acked-by: Linus Walleij Signed-off-by: Chris Ball --- diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt index 3b3a1ee055ff..328e990d2546 100644 --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt @@ -5,13 +5,6 @@ MMC, SD and eMMC storage mediums. This file documents differences between the core mmc properties described by mmc.txt and the properties used by the Samsung implmentation of the SDHCI controller. -Note: The mmc core bindings documentation states that if none of the core -card-detect bindings are used, then the standard sdhci card detect mechanism -is used. The Samsung's SDHCI controller bindings extends this as listed below. - -[A] The property "samsung,cd-pinmux-gpio" can be used as stated in the - "Optional Board Specific Properties" section below. - Required SoC Specific Properties: - compatible: should be one of the following - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci @@ -20,18 +13,8 @@ Required SoC Specific Properties: controller. Required Board Specific Properties: -- Samsung GPIO variant (will be completely replaced by pinctrl): - - gpios: Should specify the gpios used for clock, command and data lines. The - gpio specifier format depends on the gpio controller. -- Pinctrl variant (preferred if available): - - pinctrl-0: Should specify pin control groups used for this controller. - - pinctrl-names: Should contain only one value - "default". - -Optional Board Specific Properties: -- samsung,cd-pinmux-gpio: Specifies the card detect line that is routed - through a pinmux to the card-detect pin of the card slot. This property - should be used only if none of the mmc core card-detect properties are - used. Only for Samsung GPIO variant. +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". Example: sdhci@12530000 { @@ -39,19 +22,9 @@ Example: reg = <0x12530000 0x100>; interrupts = <0 75 0>; bus-width = <4>; - cd-gpios = <&gpk2 2 2 3 3>; - - /* Samsung GPIO variant */ - gpios = <&gpk2 0 2 0 3>, /* clock line */ - <&gpk2 1 2 0 3>, /* command line */ - <&gpk2 3 2 3 3>, /* data line 0 */ - <&gpk2 4 2 3 3>, /* data line 1 */ - <&gpk2 5 2 3 3>, /* data line 2 */ - <&gpk2 6 2 3 3>; /* data line 3 */ - - /* Pinctrl variant */ - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + cd-gpios = <&gpk2 2 0>; pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; }; Note: This example shows both SoC specific and board specific properties diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 128b65030a0c..8cd966d25bec 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -24,7 +24,6 @@ #include #include #include -#include #include @@ -45,7 +44,6 @@ * @ioarea: The resource created when we claimed the IO area. * @pdata: The platform data for this controller. * @cur_clk: The index of the current bus clock. - * @gpios: List of gpio numbers parsed from device tree. * @clk_io: The clock for the internal bus interface. * @clk_bus: The clocks that are available for the SD/MMC bus clock. */ @@ -57,8 +55,6 @@ struct sdhci_s3c { unsigned int cur_clk; int ext_cd_irq; int ext_cd_gpio; - int *gpios; - struct pinctrl *pctrl; struct clk *clk_io; struct clk *clk_bus[MAX_BUS_CLK]; @@ -447,88 +443,39 @@ static int sdhci_s3c_parse_dt(struct device *dev, struct device_node *node = dev->of_node; struct sdhci_s3c *ourhost = to_s3c(host); u32 max_width; - int gpio, cnt, ret; + int gpio; /* if the bus-width property is not specified, assume width as 1 */ if (of_property_read_u32(node, "bus-width", &max_width)) max_width = 1; pdata->max_width = max_width; - ourhost->gpios = devm_kzalloc(dev, NUM_GPIOS(pdata->max_width) * - sizeof(int), GFP_KERNEL); - if (!ourhost->gpios) - return -ENOMEM; - /* get the card detection method */ if (of_get_property(node, "broken-cd", NULL)) { pdata->cd_type = S3C_SDHCI_CD_NONE; - goto setup_bus; + return 0; } if (of_get_property(node, "non-removable", NULL)) { pdata->cd_type = S3C_SDHCI_CD_PERMANENT; - goto setup_bus; + return 0; } gpio = of_get_named_gpio(node, "cd-gpios", 0); if (gpio_is_valid(gpio)) { pdata->cd_type = S3C_SDHCI_CD_GPIO; - goto found_cd; - } else if (gpio != -ENOENT) { - dev_err(dev, "invalid card detect gpio specified\n"); - return -EINVAL; - } - - gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0); - if (gpio_is_valid(gpio)) { - pdata->cd_type = S3C_SDHCI_CD_INTERNAL; - goto found_cd; - } else if (gpio != -ENOENT) { - dev_err(dev, "invalid card detect gpio specified\n"); - return -EINVAL; - } - - /* assuming internal card detect that will be configured by pinctrl */ - pdata->cd_type = S3C_SDHCI_CD_INTERNAL; - goto setup_bus; - - found_cd: - if (pdata->cd_type == S3C_SDHCI_CD_GPIO) { pdata->ext_cd_gpio = gpio; ourhost->ext_cd_gpio = -1; if (of_get_property(node, "cd-inverted", NULL)) pdata->ext_cd_gpio_invert = 1; - } else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - ret = devm_gpio_request(dev, gpio, "sdhci-cd"); - if (ret) { - dev_err(dev, "card detect gpio request failed\n"); - return -EINVAL; - } - ourhost->ext_cd_gpio = gpio; - } - - setup_bus: - if (!IS_ERR(ourhost->pctrl)) return 0; - - /* get the gpios for command, clock and data lines */ - for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) { - gpio = of_get_gpio(node, cnt); - if (!gpio_is_valid(gpio)) { - dev_err(dev, "invalid gpio[%d]\n", cnt); - return -EINVAL; - } - ourhost->gpios[cnt] = gpio; - } - - for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) { - ret = devm_gpio_request(dev, ourhost->gpios[cnt], "sdhci-gpio"); - if (ret) { - dev_err(dev, "gpio[%d] request failed\n", cnt); - return -EINVAL; - } + } else if (gpio != -ENOENT) { + dev_err(dev, "invalid card detect gpio specified\n"); + return -EINVAL; } + /* assuming internal card detect that will be configured by pinctrl */ + pdata->cd_type = S3C_SDHCI_CD_INTERNAL; return 0; } #else @@ -589,8 +536,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev) goto err_pdata_io_clk; } - sc->pctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (pdev->dev.of_node) { ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata); if (ret)