From: Greg Kroah-Hartman Date: Fri, 30 Jan 2009 23:35:50 +0000 (-0800) Subject: Staging: aten2011: fix up the set_uart_reg function X-Git-Tag: firefly_0821_release~14777^2~455 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=e514adb0f282b11f8ed42c0941c18ba0cab16dca;p=firefly-linux-kernel-4.4.55.git Staging: aten2011: fix up the set_uart_reg function Name it something sane, and fix up the code to be cleaner. Cc: Russell Lang Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c index 20c731d5dd8d..886f3b5f81f6 100644 --- a/drivers/staging/uc2322/aten2011.c +++ b/drivers/staging/uc2322/aten2011.c @@ -230,8 +230,6 @@ static int debug = 0; static int RS485mode = 0; /* setting and get register values */ -static int ATEN2011_set_Uart_Reg(struct usb_serial_port *port, __u16 reg, - __u16 val); static int ATEN2011_get_Uart_Reg(struct usb_serial_port *port, __u16 reg, __u16 * val); @@ -289,45 +287,35 @@ static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val) return ret; } -static int ATEN2011_set_Uart_Reg(struct usb_serial_port *port, __u16 reg, - __u16 val) +static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val) { - struct usb_device *dev = port->serial->dev; - struct ATENINTL_serial *ATEN2011_serial; - int minor; - ATEN2011_serial = ATEN2011_get_serial_private(port->serial); + struct ATENINTL_serial *a_serial; + __u16 minor; + + a_serial = ATEN2011_get_serial_private(port->serial); minor = port->serial->minor; if (minor == SERIAL_TTY_NO_MINOR) minor = 0; val = val & 0x00ff; - // For the UART control registers, the application number need to be Or'ed - if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) { - val |= (((__u16) port->number - (__u16) (minor)) + 1) << 8; - DPRINTK("ATEN2011_set_Uart_Reg application number is %x\n", - val); - } else { - if (((__u16) port->number - (__u16) (minor)) == 0) { - // val= 0x100; - val |= - (((__u16) port->number - (__u16) (minor)) + 1) << 8; - DPRINTK - ("ATEN2011_set_Uart_Reg application number is %x\n", - val); - } else { - // val=0x300; - val |= - (((__u16) port->number - (__u16) (minor)) + 2) << 8; - DPRINTK - ("ATEN2011_set_Uart_Reg application number is %x\n", - val); - } + /* + * For the UART control registers, + * the application number need to be Or'ed + */ + if (a_serial->ATEN2011_spectrum_2or4ports == 4) + val |= (((__u16)port->number - minor) + 1) << 8; + else { + if (((__u16) port->number - minor) == 0) + val |= (((__u16)port->number - minor) + 1) << 8; + else + val |= (((__u16)port->number - minor) + 2) << 8; } + dbg("%s: application number is %x\n", __func__, val); + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ, ATEN_WR_RTYPE, val, reg, NULL, 0, ATEN_WDR_TIMEOUT); - } static int ATEN2011_get_Uart_Reg(struct usb_serial_port *port, __u16 reg, @@ -880,8 +868,7 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, Data = 0xC0; else Data = 0x00; - status = 0; - status = ATEN2011_set_Uart_Reg(port, SCRATCH_PAD_REGISTER, Data); + status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); if (status < 0) { DPRINTK("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); @@ -914,37 +901,32 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, //////////////////////////////////// Data = 0x00; - status = 0; - status = ATEN2011_set_Uart_Reg(port, INTERRUPT_ENABLE_REGISTER, Data); + status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { DPRINTK("disableing interrupts failed\n"); return -1; } // Set FIFO_CONTROL_REGISTER to the default value Data = 0x00; - status = 0; - status = ATEN2011_set_Uart_Reg(port, FIFO_CONTROL_REGISTER, Data); + status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { DPRINTK("Writing FIFO_CONTROL_REGISTER failed\n"); return -1; } Data = 0xcf; //chk - status = 0; - status = ATEN2011_set_Uart_Reg(port, FIFO_CONTROL_REGISTER, Data); + status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { DPRINTK("Writing FIFO_CONTROL_REGISTER failed\n"); return -1; } Data = 0x03; //LCR_BITS_8 - status = 0; - status = ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); + status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); ATEN2011_port->shadowLCR = Data; Data = 0x0b; // MCR_DTR|MCR_RTS|MCR_MASTER_IE - status = 0; - status = ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); ATEN2011_port->shadowMCR = Data; #ifdef Check @@ -954,16 +936,13 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, ATEN2011_port->shadowLCR = Data; Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 - status = 0; - status = ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); + status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); Data = 0x0c; - status = 0; - status = ATEN2011_set_Uart_Reg(port, DIVISOR_LATCH_LSB, Data); + status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data); Data = 0x0; - status = 0; - status = ATEN2011_set_Uart_Reg(port, DIVISOR_LATCH_MSB, Data); + status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data); Data = 0x00; status = 0; @@ -971,8 +950,7 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, // Data = ATEN2011_port->shadowLCR; //data latch disable Data = Data & ~SERIAL_LCR_DLAB; - status = 0; - status = ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); + status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); ATEN2011_port->shadowLCR = Data; #endif //clearing Bulkin and Bulkout Fifo @@ -987,8 +965,7 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, //Finally enable all interrupts Data = 0x0; Data = 0x0c; - status = 0; - status = ATEN2011_set_Uart_Reg(port, INTERRUPT_ENABLE_REGISTER, Data); + status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); //clearing rx_disable Data = 0x0; @@ -1284,9 +1261,9 @@ static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port, } // clear the MCR & IER Data = 0x00; - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); Data = 0x00; - ATEN2011_set_Uart_Reg(port, INTERRUPT_ENABLE_REGISTER, Data); + set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); //ATEN2011_get_Uart_Reg(port,MODEM_CONTROL_REGISTER,&Data1); //printk("value of MCR after closing the port is : 0x%x\n",Data1); @@ -1367,8 +1344,7 @@ static void ATEN2011_break(struct tty_struct *tty, int break_state) ATEN2011_port->shadowLCR = data; DPRINTK("ATEN2011_break ATEN2011_port->shadowLCR is %x\n", ATEN2011_port->shadowLCR); - ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, - ATEN2011_port->shadowLCR); + set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR); return; } @@ -1546,10 +1522,8 @@ static void ATEN2011_throttle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { ATEN2011_port->shadowMCR &= ~MCR_RTS; - status = 0; - status = - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, - ATEN2011_port->shadowMCR); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, + ATEN2011_port->shadowMCR); if (status < 0) { return; @@ -1592,10 +1566,8 @@ static void ATEN2011_unthrottle(struct tty_struct *tty) /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { ATEN2011_port->shadowMCR |= MCR_RTS; - status = 0; - status = - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, - ATEN2011_port->shadowMCR); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, + ATEN2011_port->shadowMCR); if (status < 0) { return; } @@ -1671,8 +1643,7 @@ static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file, ATEN2011_port->shadowMCR = mcr; - status = 0; - status = ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, mcr); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); if (status < 0) { DPRINTK("setting MODEM_CONTROL_REGISTER Failed\n"); return -1; @@ -1841,8 +1812,7 @@ static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd, ATEN2011_port->shadowMCR = mcr; Data = ATEN2011_port->shadowMCR; - status = 0; - status = ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { DPRINTK("setting MODEM_CONTROL_REGISTER Failed\n"); return -1; @@ -2083,12 +2053,10 @@ static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port #ifdef HW_flow_control //NOTE: need to see the pther register to modify //setting h/w flow control bit to 1; - status = 0; //Data = ATEN2011_port->shadowMCR ; Data = 0x2b; ATEN2011_port->shadowMCR = Data; - status = - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { DPRINTK("Writing spreg failed in set_serial_baud\n"); return -1; @@ -2098,12 +2066,10 @@ static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port } else { #ifdef HW_flow_control //setting h/w flow control bit to 0; - status = 0; //Data = ATEN2011_port->shadowMCR ; Data = 0xb; ATEN2011_port->shadowMCR = Data; - status = - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { DPRINTK("Writing spreg failed in set_serial_baud\n"); return -1; @@ -2140,21 +2106,21 @@ static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port /* Enable access to divisor latch */ Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB; ATEN2011_port->shadowLCR = Data; - ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); + set_uart_reg(port, LINE_CONTROL_REGISTER, Data); /* Write the divisor */ Data = (unsigned char)(divisor & 0xff); DPRINTK("set_serial_baud Value to write DLL is %x\n", Data); - ATEN2011_set_Uart_Reg(port, DIVISOR_LATCH_LSB, Data); + set_uart_reg(port, DIVISOR_LATCH_LSB, Data); Data = (unsigned char)((divisor & 0xff00) >> 8); DPRINTK("set_serial_baud Value to write DLM is %x\n", Data); - ATEN2011_set_Uart_Reg(port, DIVISOR_LATCH_MSB, Data); + set_uart_reg(port, DIVISOR_LATCH_MSB, Data); /* Disable access to divisor latch */ Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB; ATEN2011_port->shadowLCR = Data; - ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); + set_uart_reg(port, LINE_CONTROL_REGISTER, Data); } @@ -2264,24 +2230,24 @@ static void ATEN2011_change_port_settings(struct tty_struct *tty, ATEN2011_port->shadowLCR); /* Disable Interrupts */ Data = 0x00; - ATEN2011_set_Uart_Reg(port, INTERRUPT_ENABLE_REGISTER, Data); + set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); Data = 0x00; - ATEN2011_set_Uart_Reg(port, FIFO_CONTROL_REGISTER, Data); + set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); Data = 0xcf; - ATEN2011_set_Uart_Reg(port, FIFO_CONTROL_REGISTER, Data); + set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); /* Send the updated LCR value to the ATEN2011 */ Data = ATEN2011_port->shadowLCR; - ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); + set_uart_reg(port, LINE_CONTROL_REGISTER, Data); Data = 0x00b; ATEN2011_port->shadowMCR = Data; - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); Data = 0x00b; - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); /* set up the MCR register and send it to the ATEN2011 */ @@ -2298,7 +2264,7 @@ static void ATEN2011_change_port_settings(struct tty_struct *tty, } Data = ATEN2011_port->shadowMCR; - ATEN2011_set_Uart_Reg(port, MODEM_CONTROL_REGISTER, Data); + set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); @@ -2314,7 +2280,7 @@ static void ATEN2011_change_port_settings(struct tty_struct *tty, /* Enable Interrupts */ Data = 0x0c; - ATEN2011_set_Uart_Reg(port, INTERRUPT_ENABLE_REGISTER, Data); + set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (ATEN2011_port->read_urb->status != -EINPROGRESS) { ATEN2011_port->read_urb->dev = serial->dev;