From: Kalle Valo Date: Fri, 12 Jun 2009 11:16:58 +0000 (+0300) Subject: wl12xx: rename wl1251.c wl1251_ops.c X-Git-Tag: firefly_0821_release~12983^2~787 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=e6f0b5c2993609c576a0c45e86f7e5b6dd0ae421;p=firefly-linux-kernel-4.4.55.git wl12xx: rename wl1251.c wl1251_ops.c In preparation to split wl12xx to wl1251 and wl1271. Signed-off-by: Kalle Valo Reviewed-by: Vidhya Govindan Reviewed-by: Luciano Coelho Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile index 7e05ea379979..bb2f2524a0bc 100644 --- a/drivers/net/wireless/wl12xx/Makefile +++ b/drivers/net/wireless/wl12xx/Makefile @@ -1,4 +1,4 @@ wl12xx-objs = main.o spi.o event.o wl1251_tx.o rx.o \ - ps.o cmd.o acx.o boot.o init.o wl1251.o \ + ps.o cmd.o acx.o boot.o init.o wl1251_ops.o \ debugfs.o obj-$(CONFIG_WL12XX) += wl12xx.o diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index a2aebac9fb82..3fc48c7c28c9 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -34,7 +34,7 @@ #include "wl12xx.h" #include "wl12xx_80211.h" #include "reg.h" -#include "wl1251.h" +#include "wl1251_ops.h" #include "spi.h" #include "event.h" #include "wl1251_tx.h" diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c deleted file mode 100644 index 77494a9046e5..000000000000 --- a/drivers/net/wireless/wl12xx/wl1251.c +++ /dev/null @@ -1,728 +0,0 @@ -/* - * This file is part of wl12xx - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Kalle Valo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include - -#include "wl1251.h" -#include "reg.h" -#include "spi.h" -#include "boot.h" -#include "event.h" -#include "acx.h" -#include "wl1251_tx.h" -#include "rx.h" -#include "ps.h" -#include "init.h" - -static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = { - [PART_DOWN] = { - .mem = { - .start = 0x00000000, - .size = 0x00016800 - }, - .reg = { - .start = REGISTERS_BASE, - .size = REGISTERS_DOWN_SIZE - }, - }, - - [PART_WORK] = { - .mem = { - .start = 0x00028000, - .size = 0x00014000 - }, - .reg = { - .start = REGISTERS_BASE, - .size = REGISTERS_WORK_SIZE - }, - }, - - /* WL1251 doesn't use the DRPW partition, so we don't set it here */ -}; - -static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = { - [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474), - [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478), - [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494), - [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498), - [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C), - [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0), - [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4), - [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8), - [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000), - [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C), - [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804) -}; - -static int wl1251_upload_firmware(struct wl12xx *wl) -{ - struct wl12xx_partition_set *p_table = wl->chip.p_table; - int addr, chunk_num, partition_limit; - size_t fw_data_len; - u8 *p; - - /* whal_FwCtrl_LoadFwImageSm() */ - - wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x", - wl12xx_reg_read32(wl, CHIP_ID_B)); - - /* 10.0 check firmware length and set partition */ - fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) | - (wl->fw[6] << 8) | (wl->fw[7]); - - wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len, - CHUNK_SIZE); - - if ((fw_data_len % 4) != 0) { - wl12xx_error("firmware length not multiple of four"); - return -EIO; - } - - wl12xx_set_partition(wl, - p_table[PART_DOWN].mem.start, - p_table[PART_DOWN].mem.size, - p_table[PART_DOWN].reg.start, - p_table[PART_DOWN].reg.size); - - /* 10.1 set partition limit and chunk num */ - chunk_num = 0; - partition_limit = p_table[PART_DOWN].mem.size; - - while (chunk_num < fw_data_len / CHUNK_SIZE) { - /* 10.2 update partition, if needed */ - addr = p_table[PART_DOWN].mem.start + - (chunk_num + 2) * CHUNK_SIZE; - if (addr > partition_limit) { - addr = p_table[PART_DOWN].mem.start + - chunk_num * CHUNK_SIZE; - partition_limit = chunk_num * CHUNK_SIZE + - p_table[PART_DOWN].mem.size; - wl12xx_set_partition(wl, - addr, - p_table[PART_DOWN].mem.size, - p_table[PART_DOWN].reg.start, - p_table[PART_DOWN].reg.size); - } - - /* 10.3 upload the chunk */ - addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; - p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; - wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", - p, addr); - wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE); - - chunk_num++; - } - - /* 10.4 upload the last chunk */ - addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; - p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; - wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x", - fw_data_len % CHUNK_SIZE, p, addr); - wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE); - - return 0; -} - -static int wl1251_upload_nvs(struct wl12xx *wl) -{ - size_t nvs_len, nvs_bytes_written, burst_len; - int nvs_start, i; - u32 dest_addr, val; - u8 *nvs_ptr, *nvs; - - nvs = wl->nvs; - if (nvs == NULL) - return -ENODEV; - - nvs_ptr = nvs; - - nvs_len = wl->nvs_len; - nvs_start = wl->fw_len; - - /* - * Layout before the actual NVS tables: - * 1 byte : burst length. - * 2 bytes: destination address. - * n bytes: data to burst copy. - * - * This is ended by a 0 length, then the NVS tables. - */ - - while (nvs_ptr[0]) { - burst_len = nvs_ptr[0]; - dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); - - /* We move our pointer to the data */ - nvs_ptr += 3; - - for (i = 0; i < burst_len; i++) { - val = (nvs_ptr[0] | (nvs_ptr[1] << 8) - | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); - - wl12xx_debug(DEBUG_BOOT, - "nvs burst write 0x%x: 0x%x", - dest_addr, val); - wl12xx_mem_write32(wl, dest_addr, val); - - nvs_ptr += 4; - dest_addr += 4; - } - } - - /* - * We've reached the first zero length, the first NVS table - * is 7 bytes further. - */ - nvs_ptr += 7; - nvs_len -= nvs_ptr - nvs; - nvs_len = ALIGN(nvs_len, 4); - - /* Now we must set the partition correctly */ - wl12xx_set_partition(wl, nvs_start, - wl->chip.p_table[PART_DOWN].mem.size, - wl->chip.p_table[PART_DOWN].reg.start, - wl->chip.p_table[PART_DOWN].reg.size); - - /* And finally we upload the NVS tables */ - nvs_bytes_written = 0; - while (nvs_bytes_written < nvs_len) { - val = (nvs_ptr[0] | (nvs_ptr[1] << 8) - | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); - - val = cpu_to_le32(val); - - wl12xx_debug(DEBUG_BOOT, - "nvs write table 0x%x: 0x%x", - nvs_start, val); - wl12xx_mem_write32(wl, nvs_start, val); - - nvs_ptr += 4; - nvs_bytes_written += 4; - nvs_start += 4; - } - - return 0; -} - -static int wl1251_boot(struct wl12xx *wl) -{ - int ret = 0, minor_minor_e2_ver; - u32 tmp, boot_data; - - ret = wl12xx_boot_soft_reset(wl); - if (ret < 0) - goto out; - - /* 2. start processing NVS file */ - ret = wl->chip.op_upload_nvs(wl); - if (ret < 0) - goto out; - - /* write firmware's last address (ie. it's length) to - * ACX_EEPROMLESS_IND_REG */ - wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len); - - /* 6. read the EEPROM parameters */ - tmp = wl12xx_reg_read32(wl, SCR_PAD2); - - /* 7. read bootdata */ - wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8; - wl->boot_attr.major = (tmp & 0x00FF0000) >> 16; - tmp = wl12xx_reg_read32(wl, SCR_PAD3); - - /* 8. check bootdata and call restart sequence */ - wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16; - minor_minor_e2_ver = (tmp & 0xFF000000) >> 24; - - wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x " - "minorE2Ver 0x%x minor_minor_e2_ver 0x%x", - wl->boot_attr.radio_type, wl->boot_attr.major, - wl->boot_attr.minor, minor_minor_e2_ver); - - ret = wl12xx_boot_init_seq(wl); - if (ret < 0) - goto out; - - /* 9. NVS processing done */ - boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); - - wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data); - - /* 10. check that ECPU_CONTROL_HALT bits are set in - * pWhalBus->uBootData and start uploading firmware - */ - if ((boot_data & ECPU_CONTROL_HALT) == 0) { - wl12xx_error("boot failed, ECPU_CONTROL_HALT not set"); - ret = -EIO; - goto out; - } - - ret = wl->chip.op_upload_fw(wl); - if (ret < 0) - goto out; - - /* 10.5 start firmware */ - ret = wl12xx_boot_run_firmware(wl); - if (ret < 0) - goto out; - -out: - return ret; -} - -static int wl1251_mem_cfg(struct wl12xx *wl) -{ - struct wl1251_acx_config_memory *mem_conf; - int ret, i; - - wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg"); - - mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL); - if (!mem_conf) { - ret = -ENOMEM; - goto out; - } - - /* memory config */ - mem_conf->mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS); - mem_conf->mem_config.rx_mem_block_num = 35; - mem_conf->mem_config.tx_min_mem_block_num = 64; - mem_conf->mem_config.num_tx_queues = MAX_TX_QUEUES; - mem_conf->mem_config.host_if_options = HOSTIF_PKT_RING; - mem_conf->mem_config.num_ssid_profiles = 1; - mem_conf->mem_config.debug_buffer_size = - cpu_to_le16(TRACE_BUFFER_MAX_SIZE); - - /* RX queue config */ - mem_conf->rx_queue_config.dma_address = 0; - mem_conf->rx_queue_config.num_descs = ACX_RX_DESC_DEF; - mem_conf->rx_queue_config.priority = DEFAULT_RXQ_PRIORITY; - mem_conf->rx_queue_config.type = DEFAULT_RXQ_TYPE; - - /* TX queue config */ - for (i = 0; i < MAX_TX_QUEUES; i++) { - mem_conf->tx_queue_config[i].num_descs = ACX_TX_DESC_DEF; - mem_conf->tx_queue_config[i].attributes = i; - } - - ret = wl12xx_cmd_configure(wl, ACX_MEM_CFG, mem_conf, - sizeof(*mem_conf)); - if (ret < 0) { - wl12xx_warning("wl1251 mem config failed: %d", ret); - goto out; - } - -out: - kfree(mem_conf); - return ret; -} - -static int wl1251_hw_init_mem_config(struct wl12xx *wl) -{ - int ret; - - ret = wl1251_mem_cfg(wl); - if (ret < 0) - return ret; - - wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map), - GFP_KERNEL); - if (!wl->target_mem_map) { - wl12xx_error("couldn't allocate target memory map"); - return -ENOMEM; - } - - /* we now ask for the firmware built memory map */ - ret = wl12xx_acx_mem_map(wl, wl->target_mem_map, - sizeof(struct wl1251_acx_mem_map)); - if (ret < 0) { - wl12xx_error("couldn't retrieve firmware memory map"); - kfree(wl->target_mem_map); - wl->target_mem_map = NULL; - return ret; - } - - return 0; -} - -static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag) -{ - u32 cpu_ctrl; - - /* 10.5.0 run the firmware (I) */ - cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); - - /* 10.5.1 run the firmware (II) */ - cpu_ctrl &= ~flag; - wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); -} - -static void wl1251_target_enable_interrupts(struct wl12xx *wl) -{ - /* Enable target's interrupts */ - wl->intr_mask = WL1251_ACX_INTR_RX0_DATA | - WL1251_ACX_INTR_RX1_DATA | - WL1251_ACX_INTR_TX_RESULT | - WL1251_ACX_INTR_EVENT_A | - WL1251_ACX_INTR_EVENT_B | - WL1251_ACX_INTR_INIT_COMPLETE; - wl12xx_boot_target_enable_interrupts(wl); -} - -static void wl1251_fw_version(struct wl12xx *wl) -{ - wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver)); -} - -static void wl1251_irq_work(struct work_struct *work) -{ - u32 intr; - struct wl12xx *wl = - container_of(work, struct wl12xx, irq_work); - int ret; - - mutex_lock(&wl->mutex); - - wl12xx_debug(DEBUG_IRQ, "IRQ work"); - - if (wl->state == WL12XX_STATE_OFF) - goto out; - - ret = wl12xx_ps_elp_wakeup(wl); - if (ret < 0) - goto out; - - wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL); - - intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); - wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr); - - if (wl->data_path) { - wl->rx_counter = - wl12xx_mem_read32(wl, wl->data_path->rx_control_addr); - - /* We handle a frmware bug here */ - switch ((wl->rx_counter - wl->rx_handled) & 0xf) { - case 0: - wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync"); - intr &= ~WL1251_ACX_INTR_RX0_DATA; - intr &= ~WL1251_ACX_INTR_RX1_DATA; - break; - case 1: - wl12xx_debug(DEBUG_IRQ, "RX: FW +1"); - intr |= WL1251_ACX_INTR_RX0_DATA; - intr &= ~WL1251_ACX_INTR_RX1_DATA; - break; - case 2: - wl12xx_debug(DEBUG_IRQ, "RX: FW +2"); - intr |= WL1251_ACX_INTR_RX0_DATA; - intr |= WL1251_ACX_INTR_RX1_DATA; - break; - default: - wl12xx_warning("RX: FW and host out of sync: %d", - wl->rx_counter - wl->rx_handled); - break; - } - - wl->rx_handled = wl->rx_counter; - - - wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter); - } - - intr &= wl->intr_mask; - - if (intr == 0) { - wl12xx_debug(DEBUG_IRQ, "INTR is 0"); - wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, - ~(wl->intr_mask)); - - goto out_sleep; - } - - if (intr & WL1251_ACX_INTR_RX0_DATA) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA"); - wl12xx_rx(wl); - } - - if (intr & WL1251_ACX_INTR_RX1_DATA) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA"); - wl12xx_rx(wl); - } - - if (intr & WL1251_ACX_INTR_TX_RESULT) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT"); - wl1251_tx_complete(wl); - } - - if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) { - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr); - if (intr & WL1251_ACX_INTR_EVENT_A) - wl12xx_event_handle(wl, 0); - else - wl12xx_event_handle(wl, 1); - } - - if (intr & WL1251_ACX_INTR_INIT_COMPLETE) - wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE"); - - wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); - -out_sleep: - wl12xx_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); -} - -static int wl1251_hw_init_txq_fill(u8 qid, - struct acx_tx_queue_qos_config *config, - u32 num_blocks) -{ - config->qid = qid; - - switch (qid) { - case QOS_AC_BE: - config->high_threshold = - (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_BE_DEF * num_blocks) / 100; - break; - case QOS_AC_BK: - config->high_threshold = - (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_BK_DEF * num_blocks) / 100; - break; - case QOS_AC_VI: - config->high_threshold = - (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_VI_DEF * num_blocks) / 100; - break; - case QOS_AC_VO: - config->high_threshold = - (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; - config->low_threshold = - (QOS_TX_LOW_VO_DEF * num_blocks) / 100; - break; - default: - wl12xx_error("Invalid TX queue id: %d", qid); - return -EINVAL; - } - - return 0; -} - -static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl) -{ - struct acx_tx_queue_qos_config *config; - struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; - int ret, i; - - wl12xx_debug(DEBUG_ACX, "acx tx queue config"); - - config = kzalloc(sizeof(*config), GFP_KERNEL); - if (!config) { - ret = -ENOMEM; - goto out; - } - - for (i = 0; i < MAX_NUM_OF_AC; i++) { - ret = wl1251_hw_init_txq_fill(i, config, - wl_mem_map->num_tx_mem_blocks); - if (ret < 0) - goto out; - - ret = wl12xx_cmd_configure(wl, ACX_TX_QUEUE_CFG, - config, sizeof(*config)); - if (ret < 0) - goto out; - } - -out: - kfree(config); - return ret; -} - -static int wl1251_hw_init_data_path_config(struct wl12xx *wl) -{ - int ret; - - /* asking for the data path parameters */ - wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp), - GFP_KERNEL); - if (!wl->data_path) { - wl12xx_error("Couldnt allocate data path parameters"); - return -ENOMEM; - } - - ret = wl12xx_acx_data_path_params(wl, wl->data_path); - if (ret < 0) { - kfree(wl->data_path); - wl->data_path = NULL; - return ret; - } - - return 0; -} - -static int wl1251_hw_init(struct wl12xx *wl) -{ - struct wl1251_acx_mem_map *wl_mem_map; - int ret; - - ret = wl12xx_hw_init_hwenc_config(wl); - if (ret < 0) - return ret; - - /* Template settings */ - ret = wl12xx_hw_init_templates_config(wl); - if (ret < 0) - return ret; - - /* Default memory configuration */ - ret = wl1251_hw_init_mem_config(wl); - if (ret < 0) - return ret; - - /* Default data path configuration */ - ret = wl1251_hw_init_data_path_config(wl); - if (ret < 0) - goto out_free_memmap; - - /* RX config */ - ret = wl12xx_hw_init_rx_config(wl, - RX_CFG_PROMISCUOUS | RX_CFG_TSF, - RX_FILTER_OPTION_DEF); - /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, - RX_FILTER_OPTION_FILTER_ALL); */ - if (ret < 0) - goto out_free_data_path; - - /* TX queues config */ - ret = wl1251_hw_init_tx_queue_config(wl); - if (ret < 0) - goto out_free_data_path; - - /* PHY layer config */ - ret = wl12xx_hw_init_phy_config(wl); - if (ret < 0) - goto out_free_data_path; - - /* Beacon filtering */ - ret = wl12xx_hw_init_beacon_filter(wl); - if (ret < 0) - goto out_free_data_path; - - /* Bluetooth WLAN coexistence */ - ret = wl12xx_hw_init_pta(wl); - if (ret < 0) - goto out_free_data_path; - - /* Energy detection */ - ret = wl12xx_hw_init_energy_detection(wl); - if (ret < 0) - goto out_free_data_path; - - /* Beacons and boradcast settings */ - ret = wl12xx_hw_init_beacon_broadcast(wl); - if (ret < 0) - goto out_free_data_path; - - /* Enable data path */ - ret = wl12xx_cmd_data_path(wl, wl->channel, 1); - if (ret < 0) - goto out_free_data_path; - - /* Default power state */ - ret = wl12xx_hw_init_power_auth(wl); - if (ret < 0) - goto out_free_data_path; - - wl_mem_map = wl->target_mem_map; - wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", - wl_mem_map->num_tx_mem_blocks, - wl->data_path->tx_control_addr, - wl_mem_map->num_rx_mem_blocks, - wl->data_path->rx_control_addr); - - return 0; - - out_free_data_path: - kfree(wl->data_path); - - out_free_memmap: - kfree(wl->target_mem_map); - - return ret; -} - -static int wl1251_plt_init(struct wl12xx *wl) -{ - int ret; - - ret = wl1251_hw_init_mem_config(wl); - if (ret < 0) - return ret; - - ret = wl12xx_cmd_data_path(wl, wl->channel, 1); - if (ret < 0) - return ret; - - return 0; -} - -void wl1251_setup(struct wl12xx *wl) -{ - /* FIXME: Is it better to use strncpy here or is this ok? */ - wl->chip.fw_filename = WL1251_FW_NAME; - wl->chip.nvs_filename = WL1251_NVS_NAME; - - /* Now we know what chip we're using, so adjust the power on sleep - * time accordingly */ - wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP; - - wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE; - wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE; - - wl->chip.op_upload_nvs = wl1251_upload_nvs; - wl->chip.op_upload_fw = wl1251_upload_firmware; - wl->chip.op_boot = wl1251_boot; - wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl; - wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts; - wl->chip.op_hw_init = wl1251_hw_init; - wl->chip.op_plt_init = wl1251_plt_init; - wl->chip.op_fw_version = wl1251_fw_version; - wl->chip.op_tx_flush = wl1251_tx_flush; - wl->chip.op_cmd_join = wl1251_cmd_join; - - wl->chip.p_table = wl1251_part_table; - wl->chip.acx_reg_table = wl1251_acx_reg_table; - - INIT_WORK(&wl->irq_work, wl1251_irq_work); - INIT_WORK(&wl->tx_work, wl1251_tx_work); - -} diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h deleted file mode 100644 index 1f4a44330394..000000000000 --- a/drivers/net/wireless/wl12xx/wl1251.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * This file is part of wl12xx - * - * Copyright (C) 2008 Nokia Corporation - * - * Contact: Kalle Valo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1251_H__ -#define __WL1251_H__ - -#include - -#include "wl12xx.h" -#include "acx.h" - -#define WL1251_FW_NAME "wl1251-fw.bin" -#define WL1251_NVS_NAME "wl1251-nvs.bin" - -#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */ - -void wl1251_setup(struct wl12xx *wl); - - -struct wl1251_acx_memory { - __le16 num_stations; /* number of STAs to be supported. */ - u16 reserved_1; - - /* - * Nmber of memory buffers for the RX mem pool. - * The actual number may be less if there are - * not enough blocks left for the minimum num - * of TX ones. - */ - u8 rx_mem_block_num; - u8 reserved_2; - u8 num_tx_queues; /* From 1 to 16 */ - u8 host_if_options; /* HOST_IF* */ - u8 tx_min_mem_block_num; - u8 num_ssid_profiles; - __le16 debug_buffer_size; -} __attribute__ ((packed)); - - -#define ACX_RX_DESC_MIN 1 -#define ACX_RX_DESC_MAX 127 -#define ACX_RX_DESC_DEF 32 -struct wl1251_acx_rx_queue_config { - u8 num_descs; - u8 pad; - u8 type; - u8 priority; - __le32 dma_address; -} __attribute__ ((packed)); - -#define ACX_TX_DESC_MIN 1 -#define ACX_TX_DESC_MAX 127 -#define ACX_TX_DESC_DEF 16 -struct wl1251_acx_tx_queue_config { - u8 num_descs; - u8 pad[2]; - u8 attributes; -} __attribute__ ((packed)); - -#define MAX_TX_QUEUE_CONFIGS 5 -#define MAX_TX_QUEUES 4 -struct wl1251_acx_config_memory { - struct acx_header header; - - struct wl1251_acx_memory mem_config; - struct wl1251_acx_rx_queue_config rx_queue_config; - struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS]; -} __attribute__ ((packed)); - -struct wl1251_acx_mem_map { - struct acx_header header; - - void *code_start; - void *code_end; - - void *wep_defkey_start; - void *wep_defkey_end; - - void *sta_table_start; - void *sta_table_end; - - void *packet_template_start; - void *packet_template_end; - - void *queue_memory_start; - void *queue_memory_end; - - void *packet_memory_pool_start; - void *packet_memory_pool_end; - - void *debug_buffer1_start; - void *debug_buffer1_end; - - void *debug_buffer2_start; - void *debug_buffer2_end; - - /* Number of blocks FW allocated for TX packets */ - u32 num_tx_mem_blocks; - - /* Number of blocks FW allocated for RX packets */ - u32 num_rx_mem_blocks; -} __attribute__ ((packed)); - -/************************************************************************* - - Host Interrupt Register (WiLink -> Host) - -**************************************************************************/ - -/* RX packet is ready in Xfer buffer #0 */ -#define WL1251_ACX_INTR_RX0_DATA BIT(0) - -/* TX result(s) are in the TX complete buffer */ -#define WL1251_ACX_INTR_TX_RESULT BIT(1) - -/* OBSOLETE */ -#define WL1251_ACX_INTR_TX_XFR BIT(2) - -/* RX packet is ready in Xfer buffer #1 */ -#define WL1251_ACX_INTR_RX1_DATA BIT(3) - -/* Event was entered to Event MBOX #A */ -#define WL1251_ACX_INTR_EVENT_A BIT(4) - -/* Event was entered to Event MBOX #B */ -#define WL1251_ACX_INTR_EVENT_B BIT(5) - -/* OBSOLETE */ -#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6) - -/* Trace meassge on MBOX #A */ -#define WL1251_ACX_INTR_TRACE_A BIT(7) - -/* Trace meassge on MBOX #B */ -#define WL1251_ACX_INTR_TRACE_B BIT(8) - -/* Command processing completion */ -#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9) - -/* Init sequence is done */ -#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14) - -#define WL1251_ACX_INTR_ALL 0xFFFFFFFF - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1251_ops.c b/drivers/net/wireless/wl12xx/wl1251_ops.c new file mode 100644 index 000000000000..126537f784b1 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1251_ops.c @@ -0,0 +1,728 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "wl1251_ops.h" +#include "reg.h" +#include "spi.h" +#include "boot.h" +#include "event.h" +#include "acx.h" +#include "wl1251_tx.h" +#include "rx.h" +#include "ps.h" +#include "init.h" + +static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = { + [PART_DOWN] = { + .mem = { + .start = 0x00000000, + .size = 0x00016800 + }, + .reg = { + .start = REGISTERS_BASE, + .size = REGISTERS_DOWN_SIZE + }, + }, + + [PART_WORK] = { + .mem = { + .start = 0x00028000, + .size = 0x00014000 + }, + .reg = { + .start = REGISTERS_BASE, + .size = REGISTERS_WORK_SIZE + }, + }, + + /* WL1251 doesn't use the DRPW partition, so we don't set it here */ +}; + +static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = { + [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474), + [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478), + [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494), + [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498), + [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C), + [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0), + [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4), + [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8), + [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000), + [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C), + [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804) +}; + +static int wl1251_upload_firmware(struct wl12xx *wl) +{ + struct wl12xx_partition_set *p_table = wl->chip.p_table; + int addr, chunk_num, partition_limit; + size_t fw_data_len; + u8 *p; + + /* whal_FwCtrl_LoadFwImageSm() */ + + wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x", + wl12xx_reg_read32(wl, CHIP_ID_B)); + + /* 10.0 check firmware length and set partition */ + fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) | + (wl->fw[6] << 8) | (wl->fw[7]); + + wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len, + CHUNK_SIZE); + + if ((fw_data_len % 4) != 0) { + wl12xx_error("firmware length not multiple of four"); + return -EIO; + } + + wl12xx_set_partition(wl, + p_table[PART_DOWN].mem.start, + p_table[PART_DOWN].mem.size, + p_table[PART_DOWN].reg.start, + p_table[PART_DOWN].reg.size); + + /* 10.1 set partition limit and chunk num */ + chunk_num = 0; + partition_limit = p_table[PART_DOWN].mem.size; + + while (chunk_num < fw_data_len / CHUNK_SIZE) { + /* 10.2 update partition, if needed */ + addr = p_table[PART_DOWN].mem.start + + (chunk_num + 2) * CHUNK_SIZE; + if (addr > partition_limit) { + addr = p_table[PART_DOWN].mem.start + + chunk_num * CHUNK_SIZE; + partition_limit = chunk_num * CHUNK_SIZE + + p_table[PART_DOWN].mem.size; + wl12xx_set_partition(wl, + addr, + p_table[PART_DOWN].mem.size, + p_table[PART_DOWN].reg.start, + p_table[PART_DOWN].reg.size); + } + + /* 10.3 upload the chunk */ + addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; + p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; + wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", + p, addr); + wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE); + + chunk_num++; + } + + /* 10.4 upload the last chunk */ + addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE; + p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE; + wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x", + fw_data_len % CHUNK_SIZE, p, addr); + wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE); + + return 0; +} + +static int wl1251_upload_nvs(struct wl12xx *wl) +{ + size_t nvs_len, nvs_bytes_written, burst_len; + int nvs_start, i; + u32 dest_addr, val; + u8 *nvs_ptr, *nvs; + + nvs = wl->nvs; + if (nvs == NULL) + return -ENODEV; + + nvs_ptr = nvs; + + nvs_len = wl->nvs_len; + nvs_start = wl->fw_len; + + /* + * Layout before the actual NVS tables: + * 1 byte : burst length. + * 2 bytes: destination address. + * n bytes: data to burst copy. + * + * This is ended by a 0 length, then the NVS tables. + */ + + while (nvs_ptr[0]) { + burst_len = nvs_ptr[0]; + dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); + + /* We move our pointer to the data */ + nvs_ptr += 3; + + for (i = 0; i < burst_len; i++) { + val = (nvs_ptr[0] | (nvs_ptr[1] << 8) + | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); + + wl12xx_debug(DEBUG_BOOT, + "nvs burst write 0x%x: 0x%x", + dest_addr, val); + wl12xx_mem_write32(wl, dest_addr, val); + + nvs_ptr += 4; + dest_addr += 4; + } + } + + /* + * We've reached the first zero length, the first NVS table + * is 7 bytes further. + */ + nvs_ptr += 7; + nvs_len -= nvs_ptr - nvs; + nvs_len = ALIGN(nvs_len, 4); + + /* Now we must set the partition correctly */ + wl12xx_set_partition(wl, nvs_start, + wl->chip.p_table[PART_DOWN].mem.size, + wl->chip.p_table[PART_DOWN].reg.start, + wl->chip.p_table[PART_DOWN].reg.size); + + /* And finally we upload the NVS tables */ + nvs_bytes_written = 0; + while (nvs_bytes_written < nvs_len) { + val = (nvs_ptr[0] | (nvs_ptr[1] << 8) + | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); + + val = cpu_to_le32(val); + + wl12xx_debug(DEBUG_BOOT, + "nvs write table 0x%x: 0x%x", + nvs_start, val); + wl12xx_mem_write32(wl, nvs_start, val); + + nvs_ptr += 4; + nvs_bytes_written += 4; + nvs_start += 4; + } + + return 0; +} + +static int wl1251_boot(struct wl12xx *wl) +{ + int ret = 0, minor_minor_e2_ver; + u32 tmp, boot_data; + + ret = wl12xx_boot_soft_reset(wl); + if (ret < 0) + goto out; + + /* 2. start processing NVS file */ + ret = wl->chip.op_upload_nvs(wl); + if (ret < 0) + goto out; + + /* write firmware's last address (ie. it's length) to + * ACX_EEPROMLESS_IND_REG */ + wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len); + + /* 6. read the EEPROM parameters */ + tmp = wl12xx_reg_read32(wl, SCR_PAD2); + + /* 7. read bootdata */ + wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8; + wl->boot_attr.major = (tmp & 0x00FF0000) >> 16; + tmp = wl12xx_reg_read32(wl, SCR_PAD3); + + /* 8. check bootdata and call restart sequence */ + wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16; + minor_minor_e2_ver = (tmp & 0xFF000000) >> 24; + + wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x " + "minorE2Ver 0x%x minor_minor_e2_ver 0x%x", + wl->boot_attr.radio_type, wl->boot_attr.major, + wl->boot_attr.minor, minor_minor_e2_ver); + + ret = wl12xx_boot_init_seq(wl); + if (ret < 0) + goto out; + + /* 9. NVS processing done */ + boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); + + wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data); + + /* 10. check that ECPU_CONTROL_HALT bits are set in + * pWhalBus->uBootData and start uploading firmware + */ + if ((boot_data & ECPU_CONTROL_HALT) == 0) { + wl12xx_error("boot failed, ECPU_CONTROL_HALT not set"); + ret = -EIO; + goto out; + } + + ret = wl->chip.op_upload_fw(wl); + if (ret < 0) + goto out; + + /* 10.5 start firmware */ + ret = wl12xx_boot_run_firmware(wl); + if (ret < 0) + goto out; + +out: + return ret; +} + +static int wl1251_mem_cfg(struct wl12xx *wl) +{ + struct wl1251_acx_config_memory *mem_conf; + int ret, i; + + wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg"); + + mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL); + if (!mem_conf) { + ret = -ENOMEM; + goto out; + } + + /* memory config */ + mem_conf->mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS); + mem_conf->mem_config.rx_mem_block_num = 35; + mem_conf->mem_config.tx_min_mem_block_num = 64; + mem_conf->mem_config.num_tx_queues = MAX_TX_QUEUES; + mem_conf->mem_config.host_if_options = HOSTIF_PKT_RING; + mem_conf->mem_config.num_ssid_profiles = 1; + mem_conf->mem_config.debug_buffer_size = + cpu_to_le16(TRACE_BUFFER_MAX_SIZE); + + /* RX queue config */ + mem_conf->rx_queue_config.dma_address = 0; + mem_conf->rx_queue_config.num_descs = ACX_RX_DESC_DEF; + mem_conf->rx_queue_config.priority = DEFAULT_RXQ_PRIORITY; + mem_conf->rx_queue_config.type = DEFAULT_RXQ_TYPE; + + /* TX queue config */ + for (i = 0; i < MAX_TX_QUEUES; i++) { + mem_conf->tx_queue_config[i].num_descs = ACX_TX_DESC_DEF; + mem_conf->tx_queue_config[i].attributes = i; + } + + ret = wl12xx_cmd_configure(wl, ACX_MEM_CFG, mem_conf, + sizeof(*mem_conf)); + if (ret < 0) { + wl12xx_warning("wl1251 mem config failed: %d", ret); + goto out; + } + +out: + kfree(mem_conf); + return ret; +} + +static int wl1251_hw_init_mem_config(struct wl12xx *wl) +{ + int ret; + + ret = wl1251_mem_cfg(wl); + if (ret < 0) + return ret; + + wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map), + GFP_KERNEL); + if (!wl->target_mem_map) { + wl12xx_error("couldn't allocate target memory map"); + return -ENOMEM; + } + + /* we now ask for the firmware built memory map */ + ret = wl12xx_acx_mem_map(wl, wl->target_mem_map, + sizeof(struct wl1251_acx_mem_map)); + if (ret < 0) { + wl12xx_error("couldn't retrieve firmware memory map"); + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + return ret; + } + + return 0; +} + +static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag) +{ + u32 cpu_ctrl; + + /* 10.5.0 run the firmware (I) */ + cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL); + + /* 10.5.1 run the firmware (II) */ + cpu_ctrl &= ~flag; + wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); +} + +static void wl1251_target_enable_interrupts(struct wl12xx *wl) +{ + /* Enable target's interrupts */ + wl->intr_mask = WL1251_ACX_INTR_RX0_DATA | + WL1251_ACX_INTR_RX1_DATA | + WL1251_ACX_INTR_TX_RESULT | + WL1251_ACX_INTR_EVENT_A | + WL1251_ACX_INTR_EVENT_B | + WL1251_ACX_INTR_INIT_COMPLETE; + wl12xx_boot_target_enable_interrupts(wl); +} + +static void wl1251_fw_version(struct wl12xx *wl) +{ + wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver)); +} + +static void wl1251_irq_work(struct work_struct *work) +{ + u32 intr; + struct wl12xx *wl = + container_of(work, struct wl12xx, irq_work); + int ret; + + mutex_lock(&wl->mutex); + + wl12xx_debug(DEBUG_IRQ, "IRQ work"); + + if (wl->state == WL12XX_STATE_OFF) + goto out; + + ret = wl12xx_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL); + + intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR); + wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr); + + if (wl->data_path) { + wl->rx_counter = + wl12xx_mem_read32(wl, wl->data_path->rx_control_addr); + + /* We handle a frmware bug here */ + switch ((wl->rx_counter - wl->rx_handled) & 0xf) { + case 0: + wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync"); + intr &= ~WL1251_ACX_INTR_RX0_DATA; + intr &= ~WL1251_ACX_INTR_RX1_DATA; + break; + case 1: + wl12xx_debug(DEBUG_IRQ, "RX: FW +1"); + intr |= WL1251_ACX_INTR_RX0_DATA; + intr &= ~WL1251_ACX_INTR_RX1_DATA; + break; + case 2: + wl12xx_debug(DEBUG_IRQ, "RX: FW +2"); + intr |= WL1251_ACX_INTR_RX0_DATA; + intr |= WL1251_ACX_INTR_RX1_DATA; + break; + default: + wl12xx_warning("RX: FW and host out of sync: %d", + wl->rx_counter - wl->rx_handled); + break; + } + + wl->rx_handled = wl->rx_counter; + + + wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter); + } + + intr &= wl->intr_mask; + + if (intr == 0) { + wl12xx_debug(DEBUG_IRQ, "INTR is 0"); + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, + ~(wl->intr_mask)); + + goto out_sleep; + } + + if (intr & WL1251_ACX_INTR_RX0_DATA) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA"); + wl12xx_rx(wl); + } + + if (intr & WL1251_ACX_INTR_RX1_DATA) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA"); + wl12xx_rx(wl); + } + + if (intr & WL1251_ACX_INTR_TX_RESULT) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT"); + wl1251_tx_complete(wl); + } + + if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) { + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr); + if (intr & WL1251_ACX_INTR_EVENT_A) + wl12xx_event_handle(wl, 0); + else + wl12xx_event_handle(wl, 1); + } + + if (intr & WL1251_ACX_INTR_INIT_COMPLETE) + wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE"); + + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); + +out_sleep: + wl12xx_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); +} + +static int wl1251_hw_init_txq_fill(u8 qid, + struct acx_tx_queue_qos_config *config, + u32 num_blocks) +{ + config->qid = qid; + + switch (qid) { + case QOS_AC_BE: + config->high_threshold = + (QOS_TX_HIGH_BE_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_BE_DEF * num_blocks) / 100; + break; + case QOS_AC_BK: + config->high_threshold = + (QOS_TX_HIGH_BK_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_BK_DEF * num_blocks) / 100; + break; + case QOS_AC_VI: + config->high_threshold = + (QOS_TX_HIGH_VI_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_VI_DEF * num_blocks) / 100; + break; + case QOS_AC_VO: + config->high_threshold = + (QOS_TX_HIGH_VO_DEF * num_blocks) / 100; + config->low_threshold = + (QOS_TX_LOW_VO_DEF * num_blocks) / 100; + break; + default: + wl12xx_error("Invalid TX queue id: %d", qid); + return -EINVAL; + } + + return 0; +} + +static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl) +{ + struct acx_tx_queue_qos_config *config; + struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map; + int ret, i; + + wl12xx_debug(DEBUG_ACX, "acx tx queue config"); + + config = kzalloc(sizeof(*config), GFP_KERNEL); + if (!config) { + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < MAX_NUM_OF_AC; i++) { + ret = wl1251_hw_init_txq_fill(i, config, + wl_mem_map->num_tx_mem_blocks); + if (ret < 0) + goto out; + + ret = wl12xx_cmd_configure(wl, ACX_TX_QUEUE_CFG, + config, sizeof(*config)); + if (ret < 0) + goto out; + } + +out: + kfree(config); + return ret; +} + +static int wl1251_hw_init_data_path_config(struct wl12xx *wl) +{ + int ret; + + /* asking for the data path parameters */ + wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp), + GFP_KERNEL); + if (!wl->data_path) { + wl12xx_error("Couldnt allocate data path parameters"); + return -ENOMEM; + } + + ret = wl12xx_acx_data_path_params(wl, wl->data_path); + if (ret < 0) { + kfree(wl->data_path); + wl->data_path = NULL; + return ret; + } + + return 0; +} + +static int wl1251_hw_init(struct wl12xx *wl) +{ + struct wl1251_acx_mem_map *wl_mem_map; + int ret; + + ret = wl12xx_hw_init_hwenc_config(wl); + if (ret < 0) + return ret; + + /* Template settings */ + ret = wl12xx_hw_init_templates_config(wl); + if (ret < 0) + return ret; + + /* Default memory configuration */ + ret = wl1251_hw_init_mem_config(wl); + if (ret < 0) + return ret; + + /* Default data path configuration */ + ret = wl1251_hw_init_data_path_config(wl); + if (ret < 0) + goto out_free_memmap; + + /* RX config */ + ret = wl12xx_hw_init_rx_config(wl, + RX_CFG_PROMISCUOUS | RX_CFG_TSF, + RX_FILTER_OPTION_DEF); + /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, + RX_FILTER_OPTION_FILTER_ALL); */ + if (ret < 0) + goto out_free_data_path; + + /* TX queues config */ + ret = wl1251_hw_init_tx_queue_config(wl); + if (ret < 0) + goto out_free_data_path; + + /* PHY layer config */ + ret = wl12xx_hw_init_phy_config(wl); + if (ret < 0) + goto out_free_data_path; + + /* Beacon filtering */ + ret = wl12xx_hw_init_beacon_filter(wl); + if (ret < 0) + goto out_free_data_path; + + /* Bluetooth WLAN coexistence */ + ret = wl12xx_hw_init_pta(wl); + if (ret < 0) + goto out_free_data_path; + + /* Energy detection */ + ret = wl12xx_hw_init_energy_detection(wl); + if (ret < 0) + goto out_free_data_path; + + /* Beacons and boradcast settings */ + ret = wl12xx_hw_init_beacon_broadcast(wl); + if (ret < 0) + goto out_free_data_path; + + /* Enable data path */ + ret = wl12xx_cmd_data_path(wl, wl->channel, 1); + if (ret < 0) + goto out_free_data_path; + + /* Default power state */ + ret = wl12xx_hw_init_power_auth(wl); + if (ret < 0) + goto out_free_data_path; + + wl_mem_map = wl->target_mem_map; + wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x", + wl_mem_map->num_tx_mem_blocks, + wl->data_path->tx_control_addr, + wl_mem_map->num_rx_mem_blocks, + wl->data_path->rx_control_addr); + + return 0; + + out_free_data_path: + kfree(wl->data_path); + + out_free_memmap: + kfree(wl->target_mem_map); + + return ret; +} + +static int wl1251_plt_init(struct wl12xx *wl) +{ + int ret; + + ret = wl1251_hw_init_mem_config(wl); + if (ret < 0) + return ret; + + ret = wl12xx_cmd_data_path(wl, wl->channel, 1); + if (ret < 0) + return ret; + + return 0; +} + +void wl1251_setup(struct wl12xx *wl) +{ + /* FIXME: Is it better to use strncpy here or is this ok? */ + wl->chip.fw_filename = WL1251_FW_NAME; + wl->chip.nvs_filename = WL1251_NVS_NAME; + + /* Now we know what chip we're using, so adjust the power on sleep + * time accordingly */ + wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP; + + wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE; + wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE; + + wl->chip.op_upload_nvs = wl1251_upload_nvs; + wl->chip.op_upload_fw = wl1251_upload_firmware; + wl->chip.op_boot = wl1251_boot; + wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl; + wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts; + wl->chip.op_hw_init = wl1251_hw_init; + wl->chip.op_plt_init = wl1251_plt_init; + wl->chip.op_fw_version = wl1251_fw_version; + wl->chip.op_tx_flush = wl1251_tx_flush; + wl->chip.op_cmd_join = wl1251_cmd_join; + + wl->chip.p_table = wl1251_part_table; + wl->chip.acx_reg_table = wl1251_acx_reg_table; + + INIT_WORK(&wl->irq_work, wl1251_irq_work); + INIT_WORK(&wl->tx_work, wl1251_tx_work); + +} diff --git a/drivers/net/wireless/wl12xx/wl1251_ops.h b/drivers/net/wireless/wl12xx/wl1251_ops.h new file mode 100644 index 000000000000..74acf8e3df99 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1251_ops.h @@ -0,0 +1,165 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL1251_OPS_H__ +#define __WL1251_OPS_H__ + +#include + +#include "wl12xx.h" +#include "acx.h" + +#define WL1251_FW_NAME "wl1251-fw.bin" +#define WL1251_NVS_NAME "wl1251-nvs.bin" + +#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */ + +void wl1251_setup(struct wl12xx *wl); + + +struct wl1251_acx_memory { + __le16 num_stations; /* number of STAs to be supported. */ + u16 reserved_1; + + /* + * Nmber of memory buffers for the RX mem pool. + * The actual number may be less if there are + * not enough blocks left for the minimum num + * of TX ones. + */ + u8 rx_mem_block_num; + u8 reserved_2; + u8 num_tx_queues; /* From 1 to 16 */ + u8 host_if_options; /* HOST_IF* */ + u8 tx_min_mem_block_num; + u8 num_ssid_profiles; + __le16 debug_buffer_size; +} __attribute__ ((packed)); + + +#define ACX_RX_DESC_MIN 1 +#define ACX_RX_DESC_MAX 127 +#define ACX_RX_DESC_DEF 32 +struct wl1251_acx_rx_queue_config { + u8 num_descs; + u8 pad; + u8 type; + u8 priority; + __le32 dma_address; +} __attribute__ ((packed)); + +#define ACX_TX_DESC_MIN 1 +#define ACX_TX_DESC_MAX 127 +#define ACX_TX_DESC_DEF 16 +struct wl1251_acx_tx_queue_config { + u8 num_descs; + u8 pad[2]; + u8 attributes; +} __attribute__ ((packed)); + +#define MAX_TX_QUEUE_CONFIGS 5 +#define MAX_TX_QUEUES 4 +struct wl1251_acx_config_memory { + struct acx_header header; + + struct wl1251_acx_memory mem_config; + struct wl1251_acx_rx_queue_config rx_queue_config; + struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS]; +} __attribute__ ((packed)); + +struct wl1251_acx_mem_map { + struct acx_header header; + + void *code_start; + void *code_end; + + void *wep_defkey_start; + void *wep_defkey_end; + + void *sta_table_start; + void *sta_table_end; + + void *packet_template_start; + void *packet_template_end; + + void *queue_memory_start; + void *queue_memory_end; + + void *packet_memory_pool_start; + void *packet_memory_pool_end; + + void *debug_buffer1_start; + void *debug_buffer1_end; + + void *debug_buffer2_start; + void *debug_buffer2_end; + + /* Number of blocks FW allocated for TX packets */ + u32 num_tx_mem_blocks; + + /* Number of blocks FW allocated for RX packets */ + u32 num_rx_mem_blocks; +} __attribute__ ((packed)); + +/************************************************************************* + + Host Interrupt Register (WiLink -> Host) + +**************************************************************************/ + +/* RX packet is ready in Xfer buffer #0 */ +#define WL1251_ACX_INTR_RX0_DATA BIT(0) + +/* TX result(s) are in the TX complete buffer */ +#define WL1251_ACX_INTR_TX_RESULT BIT(1) + +/* OBSOLETE */ +#define WL1251_ACX_INTR_TX_XFR BIT(2) + +/* RX packet is ready in Xfer buffer #1 */ +#define WL1251_ACX_INTR_RX1_DATA BIT(3) + +/* Event was entered to Event MBOX #A */ +#define WL1251_ACX_INTR_EVENT_A BIT(4) + +/* Event was entered to Event MBOX #B */ +#define WL1251_ACX_INTR_EVENT_B BIT(5) + +/* OBSOLETE */ +#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6) + +/* Trace meassge on MBOX #A */ +#define WL1251_ACX_INTR_TRACE_A BIT(7) + +/* Trace meassge on MBOX #B */ +#define WL1251_ACX_INTR_TRACE_B BIT(8) + +/* Command processing completion */ +#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9) + +/* Init sequence is done */ +#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14) + +#define WL1251_ACX_INTR_ALL 0xFFFFFFFF + +#endif