From: Andy Shevchenko Date: Wed, 8 May 2013 08:55:48 +0000 (+0300) Subject: dma: acpi-dma: parse CSRT to extract additional resources X-Git-Tag: firefly_0821_release~3680^2~412^2~1 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=ee8209fd026b074bb8eb75bece516a338a281b1b;p=firefly-linux-kernel-4.4.55.git dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul --- diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..6050c8028dce 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -38,7 +38,6 @@ acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o acpi-y += pci_root.o pci_link.o pci_irq.o -acpi-y += csrt.o acpi-$(CONFIG_X86_INTEL_LPSS) += acpi_lpss.o acpi-y += acpi_platform.o acpi-y += power.o diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c deleted file mode 100644 index 5c15a91faf0b..000000000000 --- a/drivers/acpi/csrt.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Support for Core System Resources Table (CSRT) - * - * Copyright (C) 2013, Intel Corporation - * Authors: Mika Westerberg - * Andy Shevchenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ACPI: CSRT: " fmt - -#include -#include -#include -#include -#include -#include - -ACPI_MODULE_NAME("CSRT"); - -static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev, - const struct acpi_csrt_group *grp) -{ - const struct acpi_csrt_shared_info *si; - struct resource res[3]; - size_t nres; - int ret; - - memset(res, 0, sizeof(res)); - nres = 0; - - si = (const struct acpi_csrt_shared_info *)&grp[1]; - /* - * The peripherals that are listed on CSRT typically support only - * 32-bit addresses so we only use the low part of MMIO base for - * now. - */ - if (!si->mmio_base_high && si->mmio_base_low) { - /* - * There is no size of the memory resource in shared_info - * so we assume that it is 4k here. - */ - res[nres].start = si->mmio_base_low; - res[nres].end = res[0].start + SZ_4K - 1; - res[nres++].flags = IORESOURCE_MEM; - } - - if (si->gsi_interrupt) { - int irq = acpi_register_gsi(NULL, si->gsi_interrupt, - si->interrupt_mode, - si->interrupt_polarity); - res[nres].start = irq; - res[nres].end = irq; - res[nres++].flags = IORESOURCE_IRQ; - } - - if (si->base_request_line || si->num_handshake_signals) { - /* - * We pass the driver a DMA resource describing the range - * of request lines the device supports. - */ - res[nres].start = si->base_request_line; - res[nres].end = res[nres].start + si->num_handshake_signals - 1; - res[nres++].flags = IORESOURCE_DMA; - } - - ret = platform_device_add_resources(pdev, res, nres); - if (ret) { - if (si->gsi_interrupt) - acpi_unregister_gsi(si->gsi_interrupt); - return ret; - } - - return 0; -} - -static int __init -acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp) -{ - struct platform_device *pdev; - char vendor[5], name[16]; - int ret, i; - - vendor[0] = grp->vendor_id; - vendor[1] = grp->vendor_id >> 8; - vendor[2] = grp->vendor_id >> 16; - vendor[3] = grp->vendor_id >> 24; - vendor[4] = '\0'; - - if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) - return -ENODEV; - - snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id); - pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); - if (!pdev) - return -ENOMEM; - - /* Add resources based on the shared info */ - ret = acpi_csrt_parse_shared_info(pdev, grp); - if (ret) - goto fail; - - ret = platform_device_add(pdev); - if (ret) - goto fail; - - for (i = 0; i < pdev->num_resources; i++) - dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]); - - return 0; - -fail: - platform_device_put(pdev); - return ret; -} - -/* - * CSRT or Core System Resources Table is a proprietary ACPI table - * introduced by Microsoft. This table can contain devices that are not in - * the system DSDT table. In particular DMA controllers might be described - * here. - * - * We present these devices as normal platform devices that don't have ACPI - * IDs or handle. The platform device name will be something like - * ..auto for example: INTL9C06.0.auto. - */ -void __init acpi_csrt_init(void) -{ - struct acpi_csrt_group *grp, *end; - struct acpi_table_csrt *csrt; - acpi_status status; - int ret; - - status = acpi_get_table(ACPI_SIG_CSRT, 0, - (struct acpi_table_header **)&csrt); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - pr_warn("failed to get the CSRT table\n"); - return; - } - - pr_debug("parsing CSRT table for devices\n"); - - grp = (struct acpi_csrt_group *)(csrt + 1); - end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); - - while (grp < end) { - ret = acpi_csrt_parse_resource_group(grp); - if (ret) { - pr_warn("error in parsing resource group: %d\n", ret); - return; - } - - grp = (struct acpi_csrt_group *)((void *)grp + grp->length); - } -} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 6f1afd9118c8..297cbf456f86 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -35,7 +35,6 @@ void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); -void acpi_csrt_init(void); #ifdef CONFIG_ACPI_CONTAINER void acpi_container_init(void); #else diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd4f1df..aacc08f951aa 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2042,7 +2042,6 @@ int __init acpi_scan_init(void) acpi_pci_link_init(); acpi_platform_init(); acpi_lpss_init(); - acpi_csrt_init(); acpi_container_init(); acpi_memory_hotplug_init(); diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index ba6fc62e9651..5a18f82f732a 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -4,7 +4,8 @@ * Based on of-dma.c * * Copyright (C) 2013, Intel Corporation - * Author: Andy Shevchenko + * Authors: Andy Shevchenko + * Mika Westerberg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,12 +17,124 @@ #include #include #include +#include #include #include static LIST_HEAD(acpi_dma_list); static DEFINE_MUTEX(acpi_dma_lock); +/** + * acpi_dma_parse_resource_group - match device and parse resource group + * @grp: CSRT resource group + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * Returns 1 on success, 0 when no information is available, or appropriate + * errno value on error. + * + * In order to match a device from DSDT table to the corresponding CSRT device + * we use MMIO address and IRQ. + */ +static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp, + struct acpi_device *adev, struct acpi_dma *adma) +{ + const struct acpi_csrt_shared_info *si; + struct list_head resource_list; + struct resource_list_entry *rentry; + resource_size_t mem = 0, irq = 0; + u32 vendor_id; + int ret; + + if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) + return -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret <= 0) + return 0; + + list_for_each_entry(rentry, &resource_list, node) { + if (resource_type(&rentry->res) == IORESOURCE_MEM) + mem = rentry->res.start; + else if (resource_type(&rentry->res) == IORESOURCE_IRQ) + irq = rentry->res.start; + } + + acpi_dev_free_resource_list(&resource_list); + + /* Consider initial zero values as resource not found */ + if (mem == 0 && irq == 0) + return 0; + + si = (const struct acpi_csrt_shared_info *)&grp[1]; + + /* Match device by MMIO and IRQ */ + if (si->mmio_base_low != mem || si->gsi_interrupt != irq) + return 0; + + vendor_id = le32_to_cpu(grp->vendor_id); + dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n", + (char *)&vendor_id, grp->device_id, grp->revision); + + /* Check if the request line range is available */ + if (si->base_request_line == 0 && si->num_handshake_signals == 0) + return 0; + + adma->base_request_line = si->base_request_line; + adma->end_request_line = si->base_request_line + + si->num_handshake_signals - 1; + + dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n", + adma->base_request_line, adma->end_request_line); + + return 1; +} + +/** + * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * CSRT or Core System Resources Table is a proprietary ACPI table + * introduced by Microsoft. This table can contain devices that are not in + * the system DSDT table. In particular DMA controllers might be described + * here. + * + * We are using this table to get the request line range of the specific DMA + * controller to be used later. + * + */ +static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma) +{ + struct acpi_csrt_group *grp, *end; + struct acpi_table_csrt *csrt; + acpi_status status; + int ret; + + status = acpi_get_table(ACPI_SIG_CSRT, 0, + (struct acpi_table_header **)&csrt); + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) + dev_warn(&adev->dev, "failed to get the CSRT table\n"); + return; + } + + grp = (struct acpi_csrt_group *)(csrt + 1); + end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); + + while (grp < end) { + ret = acpi_dma_parse_resource_group(grp, adev, adma); + if (ret < 0) { + dev_warn(&adev->dev, + "error in parsing resource group\n"); + return; + } + + grp = (struct acpi_csrt_group *)((void *)grp + grp->length); + } +} + /** * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers * @dev: struct device of DMA controller @@ -61,6 +174,8 @@ int acpi_dma_controller_register(struct device *dev, adma->acpi_dma_xlate = acpi_dma_xlate; adma->data = data; + acpi_dma_parse_csrt(adev, adma); + /* Now queue acpi_dma controller structure in list */ mutex_lock(&acpi_dma_lock); list_add_tail(&adma->dma_controllers, &acpi_dma_list); @@ -149,6 +264,45 @@ void devm_acpi_dma_controller_free(struct device *dev) } EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); +/** + * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function + * @adma: struct acpi_dma of DMA controller + * @dma_spec: dma specifier to update + * + * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise. + * + * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource + * Descriptor": + * DMA Request Line bits is a platform-relative number uniquely + * identifying the request line assigned. Request line-to-Controller + * mapping is done in a controller-specific OS driver. + * That's why we can safely adjust slave_id when the appropriate controller is + * found. + */ +static int acpi_dma_update_dma_spec(struct acpi_dma *adma, + struct acpi_dma_spec *dma_spec) +{ + /* Set link to the DMA controller device */ + dma_spec->dev = adma->dev; + + /* Check if the request line range is available */ + if (adma->base_request_line == 0 && adma->end_request_line == 0) + return 0; + + /* Check if slave_id falls to the range */ + if (dma_spec->slave_id < adma->base_request_line || + dma_spec->slave_id > adma->end_request_line) + return -1; + + /* + * Here we adjust slave_id. It should be a relative number to the base + * request line. + */ + dma_spec->slave_id -= adma->base_request_line; + + return 1; +} + struct acpi_dma_parser_data { struct acpi_dma_spec dma_spec; size_t index; @@ -193,6 +347,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, struct acpi_device *adev; struct acpi_dma *adma; struct dma_chan *chan = NULL; + int found; /* Check if the device was enumerated by ACPI */ if (!dev || !ACPI_HANDLE(dev)) @@ -219,9 +374,20 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, mutex_lock(&acpi_dma_lock); list_for_each_entry(adma, &acpi_dma_list, dma_controllers) { - dma_spec->dev = adma->dev; + /* + * We are not going to call translation function if slave_id + * doesn't fall to the request range. + */ + found = acpi_dma_update_dma_spec(adma, dma_spec); + if (found < 0) + continue; chan = adma->acpi_dma_xlate(dma_spec, adma); - if (chan) + /* + * Try to get a channel only from the DMA controller that + * matches the slave_id. See acpi_dma_update_dma_spec() + * description for the details. + */ + if (found > 0 || chan) break; } diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deabc7bf6..fb0298082916 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */