From: Jamie Iles Date: Tue, 8 Nov 2011 10:12:32 +0000 (+0000) Subject: macb: initial support for Cadence GEM X-Git-Tag: firefly_0821_release~3680^2~3790^2~11^2~7 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=f75ba50bdc2bcfab591bdf903312557033d0ac68;p=firefly-linux-kernel-4.4.55.git macb: initial support for Cadence GEM The Cadence GEM is based on the MACB Ethernet controller but has a few small changes with regards to register and bitfield placement. This patch detects the presence of a GEM by reading the module ID register and setting a flag appropriately. This handles the new HW address, USRIO and hash register base register locations in GEM. v3: - convert to macb_is_gem() inline rather than storing a boolean flag - handle rx_overrun stats for gem Acked-by: David S. Miller Acked-by: Nicolas Ferre Cc: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Jamie Iles Tested-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index be5dde040261..94b7f287d6c5 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/ obj-$(CONFIG_NET_VENDOR_AMD) += amd/ obj-$(CONFIG_NET_VENDOR_APPLE) += apple/ obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/ -obj-$(CONFIG_NET_ATMEL) += cadence/ +obj-$(CONFIG_NET_CADENCE) += cadence/ obj-$(CONFIG_NET_BFIN) += adi/ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 98849a1fc749..a2e150059bc7 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig @@ -5,8 +5,8 @@ config HAVE_NET_MACB bool -config NET_ATMEL - bool "Atmel devices" +config NET_CADENCE + bool "Cadence devices" depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200) ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -20,7 +20,7 @@ config NET_ATMEL the remaining Atmel network card questions. If you say Y, you will be asked for your specific card in the following questions. -if NET_ATMEL +if NET_CADENCE config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" @@ -32,14 +32,16 @@ config ARM_AT91_ETHER ethernet support, then you should always answer Y to this. config MACB - tristate "Atmel MACB support" + tristate "Cadence MACB/GEM support" depends on HAVE_NET_MACB select PHYLIB ---help--- - The Atmel MACB ethernet interface is found on many AT32 and AT91 - parts. Say Y to include support for the MACB chip. + The Cadence MACB ethernet interface is found on many Atmel AT32 and + AT91 parts. This driver also supports the Cadence GEM (Gigabit + Ethernet MAC found in some ARM SoC devices). Note: the Gigabit mode + is not yet supported. Say Y to include support for the MACB/GEM chip. To compile this driver as a module, choose M here: the module will be called macb. -endif # NET_ATMEL +endif # NET_CADENCE diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index aa1d597091a8..4e61a8610d6a 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1,5 +1,5 @@ /* - * Atmel MACB Ethernet Controller driver + * Cadence MACB/GEM Ethernet Controller driver * * Copyright (C) 2004-2006 Atmel Corporation * @@ -59,9 +59,9 @@ static void __macb_set_hwaddr(struct macb *bp) u16 top; bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr)); - macb_writel(bp, SA1B, bottom); + macb_or_gem_writel(bp, SA1B, bottom); top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4))); - macb_writel(bp, SA1T, top); + macb_or_gem_writel(bp, SA1T, top); } static void __init macb_get_hwaddr(struct macb *bp) @@ -70,8 +70,8 @@ static void __init macb_get_hwaddr(struct macb *bp) u16 top; u8 addr[6]; - bottom = macb_readl(bp, SA1B); - top = macb_readl(bp, SA1T); + bottom = macb_or_gem_readl(bp, SA1B); + top = macb_or_gem_readl(bp, SA1T); addr[0] = bottom & 0xff; addr[1] = (bottom >> 8) & 0xff; @@ -580,7 +580,10 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) if (status & MACB_BIT(ISR_ROVR)) { /* We missed at least one packet */ - bp->hw_stats.rx_overruns++; + if (macb_is_gem(bp)) + bp->hw_stats.gem.rx_overruns++; + else + bp->hw_stats.macb.rx_overruns++; } if (status & MACB_BIT(HRESP)) { @@ -902,8 +905,8 @@ static void macb_sethashtable(struct net_device *dev) mc_filter[bitnr >> 5] |= 1 << (bitnr & 31); } - macb_writel(bp, HRB, mc_filter[0]); - macb_writel(bp, HRT, mc_filter[1]); + macb_or_gem_writel(bp, HRB, mc_filter[0]); + macb_or_gem_writel(bp, HRT, mc_filter[1]); } /* @@ -925,8 +928,8 @@ static void macb_set_rx_mode(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */ - macb_writel(bp, HRB, -1); - macb_writel(bp, HRT, -1); + macb_or_gem_writel(bp, HRB, -1); + macb_or_gem_writel(bp, HRT, -1); cfg |= MACB_BIT(NCFGR_MTI); } else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */ @@ -934,8 +937,8 @@ static void macb_set_rx_mode(struct net_device *dev) cfg |= MACB_BIT(NCFGR_MTI); } else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */ - macb_writel(bp, HRB, 0); - macb_writel(bp, HRT, 0); + macb_or_gem_writel(bp, HRB, 0); + macb_or_gem_writel(bp, HRT, 0); cfg &= ~MACB_BIT(NCFGR_MTI); } @@ -1196,15 +1199,16 @@ static int __init macb_probe(struct platform_device *pdev) if (pdata && pdata->is_rmii) #if defined(CONFIG_ARCH_AT91) - macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) ); + macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) | + MACB_BIT(CLKEN))); #else - macb_writel(bp, USRIO, 0); + macb_or_gem_writel(bp, USRIO, 0); #endif else #if defined(CONFIG_ARCH_AT91) - macb_writel(bp, USRIO, MACB_BIT(CLKEN)); + macb_or_gem_writel(bp, USRIO, MACB_BIT(CLKEN)); #else - macb_writel(bp, USRIO, MACB_BIT(MII)); + macb_or_gem_writel(bp, USRIO, MACB_BIT(MII)); #endif bp->tx_pending = DEF_TX_RING_PENDING; @@ -1221,8 +1225,9 @@ static int __init macb_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); - netdev_info(dev, "Atmel MACB at 0x%08lx irq %d (%pM)\n", - dev->base_addr, dev->irq, dev->dev_addr); + netdev_info(dev, "Cadence %s at 0x%08lx irq %d (%pM)\n", + macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr, + dev->irq, dev->dev_addr); phydev = bp->phy_dev; netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", @@ -1332,6 +1337,6 @@ module_init(macb_init); module_exit(macb_exit); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Atmel MACB Ethernet driver"); +MODULE_DESCRIPTION("Cadence MACB/GEM Ethernet driver"); MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_ALIAS("platform:macb"); diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index d3212f6db703..d50057c244b2 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -59,6 +59,15 @@ #define MACB_TPQ 0x00bc #define MACB_USRIO 0x00c0 #define MACB_WOL 0x00c4 +#define MACB_MID 0x00fc + +/* GEM register offsets. */ +#define GEM_NCFGR 0x0004 +#define GEM_USRIO 0x000c +#define GEM_HRB 0x0080 +#define GEM_HRT 0x0084 +#define GEM_SA1B 0x0088 +#define GEM_SA1T 0x008C /* Bitfields in NCR */ #define MACB_LB_OFFSET 0 @@ -228,6 +237,12 @@ #define MACB_WOL_MTI_OFFSET 19 #define MACB_WOL_MTI_SIZE 1 +/* Bitfields in MID */ +#define MACB_IDNUM_OFFSET 16 +#define MACB_IDNUM_SIZE 16 +#define MACB_REV_OFFSET 0 +#define MACB_REV_SIZE 16 + /* Constants for CLK */ #define MACB_CLK_DIV8 0 #define MACB_CLK_DIV16 1 @@ -254,11 +269,52 @@ << MACB_##name##_OFFSET)) \ | MACB_BF(name,value)) +#define GEM_BIT(name) \ + (1 << GEM_##name##_OFFSET) +#define GEM_BF(name, value) \ + (((value) & ((1 << GEM_##name##_SIZE) - 1)) \ + << GEM_##name##_OFFSET) +#define GEM_BFEXT(name, value)\ + (((value) >> GEM_##name##_OFFSET) \ + & ((1 << GEM_##name##_SIZE) - 1)) +#define GEM_BFINS(name, value, old) \ + (((old) & ~(((1 << GEM_##name##_SIZE) - 1) \ + << GEM_##name##_OFFSET)) \ + | GEM_BF(name, value)) + /* Register access macros */ #define macb_readl(port,reg) \ __raw_readl((port)->regs + MACB_##reg) #define macb_writel(port,reg,value) \ __raw_writel((value), (port)->regs + MACB_##reg) +#define gem_readl(port, reg) \ + __raw_readl((port)->regs + GEM_##reg) +#define gem_writel(port, reg, value) \ + __raw_writel((value), (port)->regs + GEM_##reg) + +/* + * Conditional GEM/MACB macros. These perform the operation to the correct + * register dependent on whether the device is a GEM or a MACB. For registers + * and bitfields that are common across both devices, use macb_{read,write}l + * to avoid the cost of the conditional. + */ +#define macb_or_gem_writel(__bp, __reg, __value) \ + ({ \ + if (macb_is_gem((__bp))) \ + gem_writel((__bp), __reg, __value); \ + else \ + macb_writel((__bp), __reg, __value); \ + }) + +#define macb_or_gem_readl(__bp, __reg) \ + ({ \ + u32 __v; \ + if (macb_is_gem((__bp))) \ + __v = gem_readl((__bp), __reg); \ + else \ + __v = macb_readl((__bp), __reg); \ + __v; \ + }) struct dma_desc { u32 addr; @@ -391,4 +447,9 @@ struct macb { unsigned int duplex; }; +static inline bool macb_is_gem(struct macb *bp) +{ + return MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2; +} + #endif /* _MACB_H */