From: Russell King Date: Sat, 6 Oct 2012 09:50:58 +0000 (+0100) Subject: SERIAL: omap: move driver private definitions and structures to driver X-Git-Tag: firefly_0821_release~3680^2~1501^2~9 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=f91b55ab72a913a8a61e377a7766772a20f0d96b;p=firefly-linux-kernel-4.4.55.git SERIAL: omap: move driver private definitions and structures to driver struct uart_omap_port and struct uart_omap_dma, and associated definitions are private to the driver, so there's no point them sitting in an include file under arch/arm. Move them into the driver itself. Signed-off-by: Russell King --- diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 1957a8516e93..8642e9d57b0c 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -30,35 +30,9 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MODE13X_SPEED 230400 - -#define OMAP_UART_SCR_TX_EMPTY 0x08 - -/* WER = 0x7F - * Enable module level wakeup in WER reg - */ -#define OMAP_UART_WER_MOD_WKUP 0X7F - -/* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x04 - -/* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x04 - #define OMAP_UART_SYSC_RESET 0X07 -#define OMAP_UART_TCR_TRIG 0X0F -#define OMAP_UART_SW_CLR 0XF0 #define OMAP_UART_FIFO_CLR 0X06 -#define OMAP_UART_DMA_CH_FREE -1 - -#define OMAP_MAX_HSUART_PORTS 6 - -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - -#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) -#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) - struct omap_uart_port_info { bool dma_enabled; /* To specify DMA Mode */ unsigned int uartclk; /* UART clock rate */ @@ -77,30 +51,4 @@ struct omap_uart_port_info { void (*enable_wakeup)(struct device *, bool); }; -struct uart_omap_dma { - u8 uart_dma_tx; - u8 uart_dma_rx; - int rx_dma_channel; - int tx_dma_channel; - dma_addr_t rx_buf_dma_phys; - dma_addr_t tx_buf_dma_phys; - unsigned int uart_base; - /* - * Buffer for rx dma.It is not required for tx because the buffer - * comes from port structure. - */ - unsigned char *rx_buf; - unsigned int prev_rx_dma_pos; - int tx_buf_size; - int tx_dma_used; - int rx_dma_used; - spinlock_t tx_lock; - spinlock_t rx_lock; - /* timer to poll activity on rx dma */ - struct timer_list rx_timer; - unsigned int rx_buf_size; - unsigned int rx_poll_rate; - unsigned int rx_timeout; -}; - #endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index da46be3d57b1..17babde8febf 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -44,6 +44,8 @@ #include +#define OMAP_MAX_HSUART_PORTS 6 + #define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) #define OMAP_UART_REV_42 0x0402 @@ -51,10 +53,14 @@ #define OMAP_UART_REV_52 0x0502 #define OMAP_UART_REV_63 0x0603 +#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) +#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) + #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ /* SCR register bitmasks */ #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_EMPTY (1 << 3) /* FCR register bitmasks */ #define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) @@ -71,6 +77,52 @@ #define OMAP_UART_MVR_MAJ_SHIFT 8 #define OMAP_UART_MVR_MIN_MASK 0x3f +#define OMAP_UART_DMA_CH_FREE -1 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA +#define OMAP_MODE13X_SPEED 230400 + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0X7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x4 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x4 + +#define OMAP_UART_SW_CLR 0xF0 + +#define OMAP_UART_TCR_TRIG 0x0F + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + unsigned int rx_buf_size; + unsigned int rx_poll_rate; + unsigned int rx_timeout; +}; + struct uart_omap_port { struct uart_port port; struct uart_omap_dma uart_dma;