From: Haiying Wang Date: Wed, 17 Jun 2009 13:16:10 +0000 (+0000) Subject: net/ucc_geth: Add SGMII support for UCC GETH driver X-Git-Tag: firefly_0821_release~13604^2~64 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=fb1001f3de1a8576b25d929502f1fe7865ff32dc;p=firefly-linux-kernel-4.4.55.git net/ucc_geth: Add SGMII support for UCC GETH driver -- derived from reverted commit 047584ce94108012288554a5f84585d792cc7f8f -- reworked by Grant Likely to play nice with commit: "net: Rework ucc_geth driver to use of_mdio infrastructure" (0b9da337dca972e7a4144e298ec3adb8f244d4a4) Signed-off-by: Haiying Wang Signed-off-by: David S. Miller Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 2701753d9937..4459d20dc76a 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -668,6 +668,8 @@ struct ucc_slow_pram { #define UCC_GETH_UPSMR_RMM 0x00001000 #define UCC_GETH_UPSMR_CAM 0x00000400 #define UCC_GETH_UPSMR_BRO 0x00000200 +#define UCC_GETH_UPSMR_SMM 0x00000080 +#define UCC_GETH_UPSMR_SGMM 0x00000020 /* UCC Transmit On Demand Register (UTODR) */ #define UCC_SLOW_TOD 0x8000 diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 0cf22c4f123b..255d28d4f84e 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved. + * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved. * * Author: Shlomi Gridish * Li Yang @@ -1410,6 +1410,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { upsmr |= UCC_GETH_UPSMR_TBIM; } + if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) + upsmr |= UCC_GETH_UPSMR_SGMM; + out_be32(&uf_regs->upsmr, upsmr); /* Disable autonegotiation in tbi mode, because by default it @@ -1531,6 +1534,49 @@ static void adjust_link(struct net_device *dev) spin_unlock_irqrestore(&ugeth->lock, flags); } +/* Initialize TBI PHY interface for communicating with the + * SERDES lynx PHY on the chip. We communicate with this PHY + * through the MDIO bus on each controller, treating it as a + * "normal" PHY at the address found in the UTBIPA register. We assume + * that the UTBIPA register is valid. Either the MDIO bus code will set + * it to a value that doesn't conflict with other PHYs on the bus, or the + * value doesn't matter, as there are no other PHYs on the bus. + */ +static void uec_configure_serdes(struct net_device *dev) +{ + struct ucc_geth_private *ugeth = netdev_priv(dev); + struct ucc_geth_info *ug_info = ugeth->ug_info; + struct phy_device *tbiphy; + + if (!ug_info->tbi_node) { + dev_warn(&dev->dev, "SGMII mode requires that the device " + "tree specify a tbi-handle\n"); + return; + } + + tbiphy = of_phy_find_device(ug_info->tbi_node); + if (!tbiphy) { + dev_err(&dev->dev, "error: Could not get TBI device\n"); + return; + } + + /* + * If the link is already up, we must already be ok, and don't need to + * configure and reset the TBI<->SerDes link. Maybe U-Boot configured + * everything for us? Resetting it takes the link down and requires + * several seconds for it to come back. + */ + if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) + return; + + /* Single clk mode, mii mode off(for serdes communication) */ + phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); + + phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); + + phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); +} + /* Configure the PHY for dev. * returns 0 if success. -1 if failure */ @@ -1554,6 +1600,9 @@ static int init_phy(struct net_device *dev) return -ENODEV; } + if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) + uec_configure_serdes(dev); + phydev->supported &= (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | @@ -3523,6 +3572,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type) return PHY_INTERFACE_MODE_RGMII_RXID; if (strcasecmp(phy_connection_type, "rtbi") == 0) return PHY_INTERFACE_MODE_RTBI; + if (strcasecmp(phy_connection_type, "sgmii") == 0) + return PHY_INTERFACE_MODE_SGMII; return PHY_INTERFACE_MODE_MII; } @@ -3567,6 +3618,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI, + PHY_INTERFACE_MODE_SGMII, }; ugeth_vdbg("%s: IN", __func__); @@ -3658,6 +3710,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma } ug_info->phy_node = phy; + /* Find the TBI PHY node. If it's not there, we don't support SGMII */ + ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0); + /* get the phy interface type, or default to MII */ prop = of_get_property(np, "phy-connection-type", NULL); if (!prop) { @@ -3682,6 +3737,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma case PHY_INTERFACE_MODE_RGMII_TXID: case PHY_INTERFACE_MODE_TBI: case PHY_INTERFACE_MODE_RTBI: + case PHY_INTERFACE_MODE_SGMII: max_speed = SPEED_1000; break; default: diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index dca628a922ba..1525bf51341c 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved. * * Author: Shlomi Gridish * @@ -193,6 +193,31 @@ struct ucc_geth { #define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */ #define ENET_TBI_MII_TBICON 0x11 /* TBI control */ +/* TBI MDIO register bit fields*/ +#define TBISR_LSTATUS 0x0004 +#define TBICON_CLK_SELECT 0x0020 +#define TBIANA_ASYMMETRIC_PAUSE 0x0100 +#define TBIANA_SYMMETRIC_PAUSE 0x0080 +#define TBIANA_HALF_DUPLEX 0x0040 +#define TBIANA_FULL_DUPLEX 0x0020 +#define TBICR_PHY_RESET 0x8000 +#define TBICR_ANEG_ENABLE 0x1000 +#define TBICR_RESTART_ANEG 0x0200 +#define TBICR_FULL_DUPLEX 0x0100 +#define TBICR_SPEED1_SET 0x0040 + +#define TBIANA_SETTINGS ( \ + TBIANA_ASYMMETRIC_PAUSE \ + | TBIANA_SYMMETRIC_PAUSE \ + | TBIANA_FULL_DUPLEX \ + ) +#define TBICR_SETTINGS ( \ + TBICR_PHY_RESET \ + | TBICR_ANEG_ENABLE \ + | TBICR_FULL_DUPLEX \ + | TBICR_SPEED1_SET \ + ) + /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */ #define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */ @@ -1100,6 +1125,7 @@ struct ucc_geth_info { u16 pausePeriod; u16 extensionField; struct device_node *phy_node; + struct device_node *tbi_node; u8 weightfactor[NUM_TX_QUEUES]; u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES]; u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];