From: Rafael J. Wysocki Date: Tue, 8 Jun 2010 08:49:08 +0000 (+0200) Subject: ACPI / ACPICA: Fix low-level GPE manipulation code X-Git-Tag: firefly_0821_release~9833^2~1512^2~6^2~3 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=fd247447c1d94a79d5cfc647430784306b3a8323;p=firefly-linux-kernel-4.4.55.git ACPI / ACPICA: Fix low-level GPE manipulation code ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level, which is incorrect, because this function only enables the GPE if the corresponding bit in its enable register's enable_for_run mask is set. This causes acpi_set_gpe() to work incorrectly if used for enabling GPEs that were not previously enabled with acpi_enable_gpe(). As a result, among other things, wakeup-only GPEs are never enabled by acpi_enable_wakeup_device(), so the devices that use them are unable to wake up the system. To fix this issue remove acpi_ev_enable_gpe() and its counterpart acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with acpi_hw_low_set_gpe() that will be used instead to manipulate GPE enable bits at the low level. Make the users of acpi_ev_enable_gpe() and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and make sure that GPE enable masks are only updated by acpi_enable_gpe() and acpi_disable_gpe() when GPE reference counters change from 0 to 1 and from 1 to 0, respectively. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 5e094a28cf54..138bbb521930 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -78,10 +78,6 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, acpi_status acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info); -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); - struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number); diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index c46277d179f0..32391588e163 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -93,7 +93,8 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width); u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, struct acpi_gpe_register_info *gpe_register_info); -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); +acpi_status +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action); acpi_status acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info); diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 57eeb3bde41e..66cd03835d6e 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -99,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_OK); } -/******************************************************************************* - * - * FUNCTION: acpi_ev_enable_gpe - * - * PARAMETERS: gpe_event_info - GPE to enable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless - * of type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - - ACPI_FUNCTION_TRACE(ev_enable_gpe); - - - /* - * We will only allow a GPE to be enabled if it has either an - * associated method (_Lxx/_Exx) or a handler. Otherwise, the - * GPE will be immediately disabled by acpi_ev_gpe_dispatch the - * first time it fires. - */ - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { - return_ACPI_STATUS(AE_NO_HANDLER); - } - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Clear the GPE (of stale events) */ - - status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Enable the requested GPE */ - - status = acpi_hw_write_gpe_enable_reg(gpe_event_info); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_disable_gpe - * - * PARAMETERS: gpe_event_info - GPE to disable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE, - * regardless of the type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_disable_gpe); - - - /* - * Note: Always disable the GPE, even if we think that that it is already - * disabled. It is possible that the AML or some other code has enabled - * the GPE behind our back. - */ - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * Always H/W disable this GPE, even if we don't know the GPE type. - * Simply clear the enable bit for this particular GPE, but do not - * write out the current GPE enable mask since this may inadvertently - * enable GPEs too early. An example is a rogue GPE that has arrived - * during ACPICA initialization - possibly because AML or other code - * has enabled the GPE. - */ - status = acpi_hw_low_disable_gpe(gpe_event_info); - return_ACPI_STATUS(status); -} - /******************************************************************************* * @@ -450,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } - /* Update the GPE register masks for return to enabled state */ - - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); - /* * Take a snapshot of the GPE info for this level - we copy the info to * prevent a race condition with remove_handler/remove_block. @@ -606,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE, so it doesn't keep firing before the method has a * chance to run (it runs asynchronously with interrupts enabled). */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", @@ -643,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE. The GPE will remain disabled a handler * is installed or ACPICA is restarted. */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 7c7bbb4d402c..e3d9f5c8e53d 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -199,6 +199,44 @@ acpi_status acpi_enable_event(u32 event, u32 flags) ACPI_EXPORT_SYMBOL(acpi_enable_event) +/******************************************************************************* + * + * FUNCTION: acpi_clear_and_enable_gpe + * + * PARAMETERS: gpe_event_info - GPE to enable + * + * RETURN: Status + * + * DESCRIPTION: Clear the given GPE from stale events and enable it. + * + ******************************************************************************/ +static acpi_status +acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) +{ + acpi_status status; + + /* + * We will only allow a GPE to be enabled if it has either an + * associated method (_Lxx/_Exx) or a handler. Otherwise, the + * GPE will be immediately disabled by acpi_ev_gpe_dispatch the + * first time it fires. + */ + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { + return_ACPI_STATUS(AE_NO_HANDLER); + } + + /* Clear the GPE (of stale events) */ + status = acpi_hw_clear_gpe(gpe_event_info); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Enable the requested GPE */ + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE); + + return_ACPI_STATUS(status); +} + /******************************************************************************* * * FUNCTION: acpi_set_gpe @@ -240,11 +278,11 @@ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) switch (action) { case ACPI_GPE_ENABLE: - status = acpi_ev_enable_gpe(gpe_event_info); + status = acpi_clear_and_enable_gpe(gpe_event_info); break; case ACPI_GPE_DISABLE: - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); break; default: @@ -307,7 +345,11 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) gpe_event_info->runtime_count++; if (gpe_event_info->runtime_count == 1) { - status = acpi_ev_enable_gpe(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_SUCCESS(status)) { + status = acpi_clear_and_enable_gpe(gpe_event_info); + } + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count--; goto unlock_and_exit; @@ -334,7 +376,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) */ gpe_event_info->wakeup_count++; if (gpe_event_info->wakeup_count == 1) { - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); } } @@ -394,7 +436,12 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type gpe_event_info->runtime_count--; if (!gpe_event_info->runtime_count) { - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_SUCCESS(status)) { + status = acpi_hw_low_set_gpe(gpe_event_info, + ACPI_GPE_DISABLE); + } + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count++; goto unlock_and_exit; @@ -415,7 +462,7 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type gpe_event_info->wakeup_count--; if (!gpe_event_info->wakeup_count) { - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); } } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index d989b8e786cc..40388e23e103 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -78,23 +78,27 @@ u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, /****************************************************************************** * - * FUNCTION: acpi_hw_low_disable_gpe + * FUNCTION: acpi_hw_low_set_gpe * * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled + * action - Enable or disable * * RETURN: Status * - * DESCRIPTION: Disable a single GPE in the enable register. + * DESCRIPTION: Enable or disable a single GPE in its enable register. * ******************************************************************************/ -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) +acpi_status +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status; u32 enable_mask; u32 register_bit; + ACPI_FUNCTION_ENTRY(); + /* Get the info block for the entire GPE register */ gpe_register_info = gpe_event_info->register_info; @@ -109,11 +113,23 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) return (status); } - /* Clear just the bit that corresponds to this GPE */ + /* Set ot clear just the bit that corresponds to this GPE */ register_bit = acpi_hw_gpe_register_bit(gpe_event_info, gpe_register_info); - ACPI_CLEAR_BIT(enable_mask, register_bit); + switch (action) { + case ACPI_GPE_ENABLE: + ACPI_SET_BIT(enable_mask, register_bit); + break; + + case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(enable_mask, register_bit); + break; + + default: + ACPI_ERROR((AE_INFO, "Invalid action\n")); + return (AE_BAD_PARAMETER); + } /* Write the updated enable mask */ diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index de5e99a99530..6881f5b7b7be 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -663,7 +663,7 @@ typedef u32 acpi_event_status; #define ACPI_GPE_MAX 0xFF #define ACPI_NUM_GPE 256 -/* Actions for acpi_set_gpe */ +/* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */ #define ACPI_GPE_ENABLE 0 #define ACPI_GPE_DISABLE 1