From: Jean Delvare Date: Mon, 21 Mar 2011 16:59:36 +0000 (+0100) Subject: Move lis3lv02d drivers to drivers/misc X-Git-Tag: firefly_0821_release~7613^2~2125^2~8 X-Git-Url: http://demsky.eecs.uci.edu/git/?a=commitdiff_plain;h=ff606677f6a47c63329cf8e6c7cf978c29f2d736;p=firefly-linux-kernel-4.4.55.git Move lis3lv02d drivers to drivers/misc The lis3lv02d drivers aren't hardware monitoring drivers, so the don't belong to drivers/hwmon. Move them to drivers/misc, short of a better home. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck Acked-by: Eric Piel Acked-by: Jonathan Cameron Tested-by: Eric Piel Tested-by: Takashi Iwai --- diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d deleted file mode 100644 index f1a4ec840f86..000000000000 --- a/Documentation/hwmon/lis3lv02d +++ /dev/null @@ -1,92 +0,0 @@ -Kernel driver lis3lv02d -======================= - -Supported chips: - - * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision) - * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) - -Authors: - Yan Burman - Eric Piel - - -Description ------------ - -This driver provides support for the accelerometer found in various HP laptops -sporting the feature officially called "HP Mobile Data Protection System 3D" or -"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known -models (full list can be found in drivers/platform/x86/hp_accel.c) will have -their axis automatically oriented on standard way (eg: you can directly play -neverball). The accelerometer data is readable via -/sys/devices/platform/lis3lv02d. Reported values are scaled -to mg values (1/1000th of earth gravity). - -Sysfs attributes under /sys/devices/platform/lis3lv02d/: -position - 3D position that the accelerometer reports. Format: "(x,y,z)" -rate - read reports the sampling rate of the accelerometer device in HZ. - write changes sampling rate of the accelerometer device. - Only values which are supported by HW are accepted. -selftest - performs selftest for the chip as specified by chip manufacturer. - -This driver also provides an absolute input class device, allowing -the laptop to act as a pinball machine-esque joystick. Joystick device can be -calibrated. Joystick device can be in two different modes. -By default output values are scaled between -32768 .. 32767. In joystick raw -mode, joystick and sysfs position entry have the same scale. There can be -small difference due to input system fuzziness feature. -Events are also available as input event device. - -Selftest is meant only for hardware diagnostic purposes. It is not meant to be -used during normal operations. Position data is not corrupted during selftest -but interrupt behaviour is not guaranteed to work reliably. In test mode, the -sensing element is internally moved little bit. Selftest measures difference -between normal mode and test mode. Chip specifications tell the acceptance -limit for each type of the chip. Limits are provided via platform data -to allow adjustment of the limits without a change to the actual driver. -Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are -measured difference between modes. Axes are not remapped in selftest mode. -Measurement values are provided to help HW diagnostic applications to make -final decision. - -On HP laptops, if the led infrastructure is activated, support for a led -indicating disk protection will be provided as /sys/class/leds/hp::hddprotect. - -Another feature of the driver is misc device called "freefall" that -acts similar to /dev/rtc and reacts on free-fall interrupts received -from the device. It supports blocking operations, poll/select and -fasync operation modes. You must read 1 bytes from the device. The -result is number of free-fall interrupts since the last successful -read (or 255 if number of interrupts would not fit). See the hpfall.c -file for an example on using the device. - - -Axes orientation ----------------- - -For better compatibility between the various laptops. The values reported by -the accelerometer are converted into a "standard" organisation of the axes -(aka "can play neverball out of the box"): - * When the laptop is horizontal the position reported is about 0 for X and Y - and a positive value for Z - * If the left side is elevated, X increases (becomes positive) - * If the front side (where the touchpad is) is elevated, Y decreases - (becomes negative) - * If the laptop is put upside-down, Z becomes negative - -If your laptop model is not recognized (cf "dmesg"), you can send an -email to the maintainer to add it to the database. When reporting a new -laptop, please include the output of "dmidecode" plus the value of -/sys/devices/platform/lis3lv02d/position in these four cases. - -Q&A ---- - -Q: How do I safely simulate freefall? I have an HP "portable -workstation" which has about 3.5kg and a plastic case, so letting it -fall to the ground is out of question... - -A: The sensor is pretty sensitive, so your hands can do it. Lift it -into free space, follow the fall with your hands for like 10 -centimeters. That should be enough to trigger the detection. diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d new file mode 100644 index 000000000000..f1a4ec840f86 --- /dev/null +++ b/Documentation/misc-devices/lis3lv02d @@ -0,0 +1,92 @@ +Kernel driver lis3lv02d +======================= + +Supported chips: + + * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision) + * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) + +Authors: + Yan Burman + Eric Piel + + +Description +----------- + +This driver provides support for the accelerometer found in various HP laptops +sporting the feature officially called "HP Mobile Data Protection System 3D" or +"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known +models (full list can be found in drivers/platform/x86/hp_accel.c) will have +their axis automatically oriented on standard way (eg: you can directly play +neverball). The accelerometer data is readable via +/sys/devices/platform/lis3lv02d. Reported values are scaled +to mg values (1/1000th of earth gravity). + +Sysfs attributes under /sys/devices/platform/lis3lv02d/: +position - 3D position that the accelerometer reports. Format: "(x,y,z)" +rate - read reports the sampling rate of the accelerometer device in HZ. + write changes sampling rate of the accelerometer device. + Only values which are supported by HW are accepted. +selftest - performs selftest for the chip as specified by chip manufacturer. + +This driver also provides an absolute input class device, allowing +the laptop to act as a pinball machine-esque joystick. Joystick device can be +calibrated. Joystick device can be in two different modes. +By default output values are scaled between -32768 .. 32767. In joystick raw +mode, joystick and sysfs position entry have the same scale. There can be +small difference due to input system fuzziness feature. +Events are also available as input event device. + +Selftest is meant only for hardware diagnostic purposes. It is not meant to be +used during normal operations. Position data is not corrupted during selftest +but interrupt behaviour is not guaranteed to work reliably. In test mode, the +sensing element is internally moved little bit. Selftest measures difference +between normal mode and test mode. Chip specifications tell the acceptance +limit for each type of the chip. Limits are provided via platform data +to allow adjustment of the limits without a change to the actual driver. +Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are +measured difference between modes. Axes are not remapped in selftest mode. +Measurement values are provided to help HW diagnostic applications to make +final decision. + +On HP laptops, if the led infrastructure is activated, support for a led +indicating disk protection will be provided as /sys/class/leds/hp::hddprotect. + +Another feature of the driver is misc device called "freefall" that +acts similar to /dev/rtc and reacts on free-fall interrupts received +from the device. It supports blocking operations, poll/select and +fasync operation modes. You must read 1 bytes from the device. The +result is number of free-fall interrupts since the last successful +read (or 255 if number of interrupts would not fit). See the hpfall.c +file for an example on using the device. + + +Axes orientation +---------------- + +For better compatibility between the various laptops. The values reported by +the accelerometer are converted into a "standard" organisation of the axes +(aka "can play neverball out of the box"): + * When the laptop is horizontal the position reported is about 0 for X and Y + and a positive value for Z + * If the left side is elevated, X increases (becomes positive) + * If the front side (where the touchpad is) is elevated, Y decreases + (becomes negative) + * If the laptop is put upside-down, Z becomes negative + +If your laptop model is not recognized (cf "dmesg"), you can send an +email to the maintainer to add it to the database. When reporting a new +laptop, please include the output of "dmidecode" plus the value of +/sys/devices/platform/lis3lv02d/position in these four cases. + +Q&A +--- + +Q: How do I safely simulate freefall? I have an HP "portable +workstation" which has about 3.5kg and a plastic case, so letting it +fall to the ground is out of question... + +A: The sensor is pretty sensitive, so your hands can do it. Lift it +into free space, follow the fall with your hands for like 10 +centimeters. That should be enough to trigger the detection. diff --git a/MAINTAINERS b/MAINTAINERS index c7a41b1fe453..4edb2a800b54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3913,8 +3913,8 @@ S: Supported LIS3LV02D ACCELEROMETER DRIVER M: Eric Piel S: Maintained -F: Documentation/hwmon/lis3lv02d -F: drivers/hwmon/lis3lv02d.* +F: Documentation/misc-devices/lis3lv02d +F: drivers/misc/lis3lv02d/ LLC (802.2) M: Arnaldo Carvalho de Melo diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 3f8c895417de..47621abb9a05 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2,12 +2,6 @@ # Hardware monitoring chip drivers configuration # -config SENSORS_LIS3LV02D - tristate - depends on INPUT - select INPUT_POLLDEV - default n - menuconfig HWMON tristate "Hardware Monitoring support" depends on HAS_IOMEM @@ -1221,40 +1215,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_LIS3_SPI - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" - depends on !ACPI && SPI_MASTER && INPUT - select SENSORS_LIS3LV02D - default n - help - This driver provides support for the LIS3LV02Dx accelerometer connected - via SPI. The accelerometer data is readable via - /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for the SPI transport - is called lis3lv02d_spi. - -config SENSORS_LIS3_I2C - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" - depends on I2C && INPUT - select SENSORS_LIS3LV02D - default n - help - This driver provides support for the LIS3LV02Dx accelerometer connected - via I2C. The accelerometer data is readable via - /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - the device to act as a pinball machine-esque joystick. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for the I2C transport - is called lis3lv02d_i2c. - config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 55ba906def74..c068f82082cd 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -5,9 +5,6 @@ obj-$(CONFIG_HWMON) += hwmon.o obj-$(CONFIG_HWMON_VID) += hwmon-vid.o -# Helper drivers -obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o - # APCI drivers obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o @@ -66,8 +63,6 @@ obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o -obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d_spi.o -obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d_i2c.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM73) += lm73.o diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c deleted file mode 100644 index d805e8e57967..000000000000 --- a/drivers/hwmon/lis3lv02d.c +++ /dev/null @@ -1,1000 +0,0 @@ -/* - * lis3lv02d.c - ST LIS3LV02DL accelerometer driver - * - * Copyright (C) 2007-2008 Yan Burman - * Copyright (C) 2008 Eric Piel - * Copyright (C) 2008-2009 Pavel Machek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "lis3lv02d.h" - -#define DRIVER_NAME "lis3lv02d" - -/* joystick device poll interval in milliseconds */ -#define MDPS_POLL_INTERVAL 50 -#define MDPS_POLL_MIN 0 -#define MDPS_POLL_MAX 2000 - -#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */ - -#define SELFTEST_OK 0 -#define SELFTEST_FAIL -1 -#define SELFTEST_IRQ -2 - -#define IRQ_LINE0 0 -#define IRQ_LINE1 1 - -/* - * The sensor can also generate interrupts (DRDY) but it's pretty pointless - * because they are generated even if the data do not change. So it's better - * to keep the interrupt for the free-fall event. The values are updated at - * 40Hz (at the lowest frequency), but as it can be pretty time consuming on - * some low processor, we poll the sensor only at 20Hz... enough for the - * joystick. - */ - -#define LIS3_PWRON_DELAY_WAI_12B (5000) -#define LIS3_PWRON_DELAY_WAI_8B (3000) - -/* - * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG - * LIS302D spec says: 18 mG / digit - * LIS3_ACCURACY is used to increase accuracy of the intermediate - * calculation results. - */ -#define LIS3_ACCURACY 1024 -/* Sensitivity values for -2G +2G scale */ -#define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024) -#define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY) - -#define LIS3_DEFAULT_FUZZ_12B 3 -#define LIS3_DEFAULT_FLAT_12B 3 -#define LIS3_DEFAULT_FUZZ_8B 1 -#define LIS3_DEFAULT_FLAT_8B 1 - -struct lis3lv02d lis3_dev = { - .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait), -}; - -EXPORT_SYMBOL_GPL(lis3_dev); - -/* just like param_set_int() but does sanity-check so that it won't point - * over the axis array size - */ -static int param_set_axis(const char *val, const struct kernel_param *kp) -{ - int ret = param_set_int(val, kp); - if (!ret) { - int val = *(int *)kp->arg; - if (val < 0) - val = -val; - if (!val || val > 3) - return -EINVAL; - } - return ret; -} - -static struct kernel_param_ops param_ops_axis = { - .set = param_set_axis, - .get = param_get_int, -}; - -module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644); -MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions"); - -static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg) -{ - s8 lo; - if (lis3->read(lis3, reg, &lo) < 0) - return 0; - - return lo; -} - -static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg) -{ - u8 lo, hi; - - lis3->read(lis3, reg - 1, &lo); - lis3->read(lis3, reg, &hi); - /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ - return (s16)((hi << 8) | lo); -} - -/** - * lis3lv02d_get_axis - For the given axis, give the value converted - * @axis: 1,2,3 - can also be negative - * @hw_values: raw values returned by the hardware - * - * Returns the converted value. - */ -static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) -{ - if (axis > 0) - return hw_values[axis - 1]; - else - return -hw_values[-axis - 1]; -} - -/** - * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer - * @lis3: pointer to the device struct - * @x: where to store the X axis value - * @y: where to store the Y axis value - * @z: where to store the Z axis value - * - * Note that 40Hz input device can eat up about 10% CPU at 800MHZ - */ -static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z) -{ - int position[3]; - int i; - - if (lis3->blkread) { - if (lis3_dev.whoami == WAI_12B) { - u16 data[3]; - lis3->blkread(lis3, OUTX_L, 6, (u8 *)data); - for (i = 0; i < 3; i++) - position[i] = (s16)le16_to_cpu(data[i]); - } else { - u8 data[5]; - /* Data: x, dummy, y, dummy, z */ - lis3->blkread(lis3, OUTX, 5, data); - for (i = 0; i < 3; i++) - position[i] = (s8)data[i * 2]; - } - } else { - position[0] = lis3->read_data(lis3, OUTX); - position[1] = lis3->read_data(lis3, OUTY); - position[2] = lis3->read_data(lis3, OUTZ); - } - - for (i = 0; i < 3; i++) - position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY; - - *x = lis3lv02d_get_axis(lis3->ac.x, position); - *y = lis3lv02d_get_axis(lis3->ac.y, position); - *z = lis3lv02d_get_axis(lis3->ac.z, position); -} - -/* conversion btw sampling rate and the register values */ -static int lis3_12_rates[4] = {40, 160, 640, 2560}; -static int lis3_8_rates[2] = {100, 400}; -static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000}; - -/* ODR is Output Data Rate */ -static int lis3lv02d_get_odr(void) -{ - u8 ctrl; - int shift; - - lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); - ctrl &= lis3_dev.odr_mask; - shift = ffs(lis3_dev.odr_mask) - 1; - return lis3_dev.odrs[(ctrl >> shift)]; -} - -static int lis3lv02d_set_odr(int rate) -{ - u8 ctrl; - int i, len, shift; - - if (!rate) - return -EINVAL; - - lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); - ctrl &= ~lis3_dev.odr_mask; - len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */ - shift = ffs(lis3_dev.odr_mask) - 1; - - for (i = 0; i < len; i++) - if (lis3_dev.odrs[i] == rate) { - lis3_dev.write(&lis3_dev, CTRL_REG1, - ctrl | (i << shift)); - return 0; - } - return -EINVAL; -} - -static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3]) -{ - u8 ctlreg, reg; - s16 x, y, z; - u8 selftest; - int ret; - u8 ctrl_reg_data; - unsigned char irq_cfg; - - mutex_lock(&lis3->mutex); - - irq_cfg = lis3->irq_cfg; - if (lis3_dev.whoami == WAI_8B) { - lis3->data_ready_count[IRQ_LINE0] = 0; - lis3->data_ready_count[IRQ_LINE1] = 0; - - /* Change interrupt cfg to data ready for selftest */ - atomic_inc(&lis3_dev.wake_thread); - lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY; - lis3->read(lis3, CTRL_REG3, &ctrl_reg_data); - lis3->write(lis3, CTRL_REG3, (ctrl_reg_data & - ~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) | - (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY)); - } - - if (lis3_dev.whoami == WAI_3DC) { - ctlreg = CTRL_REG4; - selftest = CTRL4_ST0; - } else { - ctlreg = CTRL_REG1; - if (lis3_dev.whoami == WAI_12B) - selftest = CTRL1_ST; - else - selftest = CTRL1_STP; - } - - lis3->read(lis3, ctlreg, ®); - lis3->write(lis3, ctlreg, (reg | selftest)); - msleep(lis3->pwron_delay / lis3lv02d_get_odr()); - - /* Read directly to avoid axis remap */ - x = lis3->read_data(lis3, OUTX); - y = lis3->read_data(lis3, OUTY); - z = lis3->read_data(lis3, OUTZ); - - /* back to normal settings */ - lis3->write(lis3, ctlreg, reg); - msleep(lis3->pwron_delay / lis3lv02d_get_odr()); - - results[0] = x - lis3->read_data(lis3, OUTX); - results[1] = y - lis3->read_data(lis3, OUTY); - results[2] = z - lis3->read_data(lis3, OUTZ); - - ret = 0; - - if (lis3_dev.whoami == WAI_8B) { - /* Restore original interrupt configuration */ - atomic_dec(&lis3_dev.wake_thread); - lis3->write(lis3, CTRL_REG3, ctrl_reg_data); - lis3->irq_cfg = irq_cfg; - - if ((irq_cfg & LIS3_IRQ1_MASK) && - lis3->data_ready_count[IRQ_LINE0] < 2) { - ret = SELFTEST_IRQ; - goto fail; - } - - if ((irq_cfg & LIS3_IRQ2_MASK) && - lis3->data_ready_count[IRQ_LINE1] < 2) { - ret = SELFTEST_IRQ; - goto fail; - } - } - - if (lis3->pdata) { - int i; - for (i = 0; i < 3; i++) { - /* Check against selftest acceptance limits */ - if ((results[i] < lis3->pdata->st_min_limits[i]) || - (results[i] > lis3->pdata->st_max_limits[i])) { - ret = SELFTEST_FAIL; - goto fail; - } - } - } - - /* test passed */ -fail: - mutex_unlock(&lis3->mutex); - return ret; -} - -/* - * Order of registers in the list affects to order of the restore process. - * Perhaps it is a good idea to set interrupt enable register as a last one - * after all other configurations - */ -static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1, - FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2, - CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ, - CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW, - CTRL_REG1, CTRL_REG2, CTRL_REG3}; - -static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H, - FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H, - DD_THSE_L, DD_THSE_H, - CTRL_REG1, CTRL_REG3, CTRL_REG2}; - -static inline void lis3_context_save(struct lis3lv02d *lis3) -{ - int i; - for (i = 0; i < lis3->regs_size; i++) - lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]); - lis3->regs_stored = true; -} - -static inline void lis3_context_restore(struct lis3lv02d *lis3) -{ - int i; - if (lis3->regs_stored) - for (i = 0; i < lis3->regs_size; i++) - lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]); -} - -void lis3lv02d_poweroff(struct lis3lv02d *lis3) -{ - if (lis3->reg_ctrl) - lis3_context_save(lis3); - /* disable X,Y,Z axis and power down */ - lis3->write(lis3, CTRL_REG1, 0x00); - if (lis3->reg_ctrl) - lis3->reg_ctrl(lis3, LIS3_REG_OFF); -} -EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); - -void lis3lv02d_poweron(struct lis3lv02d *lis3) -{ - u8 reg; - - lis3->init(lis3); - - /* - * Common configuration - * BDU: (12 bits sensors only) LSB and MSB values are not updated until - * both have been read. So the value read will always be correct. - * Set BOOT bit to refresh factory tuning values. - */ - lis3->read(lis3, CTRL_REG2, ®); - if (lis3->whoami == WAI_12B) - reg |= CTRL2_BDU | CTRL2_BOOT; - else - reg |= CTRL2_BOOT_8B; - lis3->write(lis3, CTRL_REG2, reg); - - /* LIS3 power on delay is quite long */ - msleep(lis3->pwron_delay / lis3lv02d_get_odr()); - - if (lis3->reg_ctrl) - lis3_context_restore(lis3); -} -EXPORT_SYMBOL_GPL(lis3lv02d_poweron); - - -static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) -{ - int x, y, z; - - mutex_lock(&lis3_dev.mutex); - lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - input_report_abs(pidev->input, ABS_X, x); - input_report_abs(pidev->input, ABS_Y, y); - input_report_abs(pidev->input, ABS_Z, z); - input_sync(pidev->input); - mutex_unlock(&lis3_dev.mutex); -} - -static void lis3lv02d_joystick_open(struct input_polled_dev *pidev) -{ - if (lis3_dev.pm_dev) - pm_runtime_get_sync(lis3_dev.pm_dev); - - if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev) - atomic_set(&lis3_dev.wake_thread, 1); - /* - * Update coordinates for the case where poll interval is 0 and - * the chip in running purely under interrupt control - */ - lis3lv02d_joystick_poll(pidev); -} - -static void lis3lv02d_joystick_close(struct input_polled_dev *pidev) -{ - atomic_set(&lis3_dev.wake_thread, 0); - if (lis3_dev.pm_dev) - pm_runtime_put(lis3_dev.pm_dev); -} - -static irqreturn_t lis302dl_interrupt(int irq, void *dummy) -{ - if (!test_bit(0, &lis3_dev.misc_opened)) - goto out; - - /* - * Be careful: on some HP laptops the bios force DD when on battery and - * the lid is closed. This leads to interrupts as soon as a little move - * is done. - */ - atomic_inc(&lis3_dev.count); - - wake_up_interruptible(&lis3_dev.misc_wait); - kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN); -out: - if (atomic_read(&lis3_dev.wake_thread)) - return IRQ_WAKE_THREAD; - return IRQ_HANDLED; -} - -static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3) -{ - struct input_dev *dev = lis3->idev->input; - u8 click_src; - - mutex_lock(&lis3->mutex); - lis3->read(lis3, CLICK_SRC, &click_src); - - if (click_src & CLICK_SINGLE_X) { - input_report_key(dev, lis3->mapped_btns[0], 1); - input_report_key(dev, lis3->mapped_btns[0], 0); - } - - if (click_src & CLICK_SINGLE_Y) { - input_report_key(dev, lis3->mapped_btns[1], 1); - input_report_key(dev, lis3->mapped_btns[1], 0); - } - - if (click_src & CLICK_SINGLE_Z) { - input_report_key(dev, lis3->mapped_btns[2], 1); - input_report_key(dev, lis3->mapped_btns[2], 0); - } - input_sync(dev); - mutex_unlock(&lis3->mutex); -} - -static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index) -{ - int dummy; - - /* Dummy read to ack interrupt */ - lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy); - lis3->data_ready_count[index]++; -} - -static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data) -{ - struct lis3lv02d *lis3 = data; - u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK; - - if (irq_cfg == LIS3_IRQ1_CLICK) - lis302dl_interrupt_handle_click(lis3); - else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY)) - lis302dl_data_ready(lis3, IRQ_LINE0); - else - lis3lv02d_joystick_poll(lis3->idev); - - return IRQ_HANDLED; -} - -static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data) -{ - struct lis3lv02d *lis3 = data; - u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK; - - if (irq_cfg == LIS3_IRQ2_CLICK) - lis302dl_interrupt_handle_click(lis3); - else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY)) - lis302dl_data_ready(lis3, IRQ_LINE1); - else - lis3lv02d_joystick_poll(lis3->idev); - - return IRQ_HANDLED; -} - -static int lis3lv02d_misc_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &lis3_dev.misc_opened)) - return -EBUSY; /* already open */ - - if (lis3_dev.pm_dev) - pm_runtime_get_sync(lis3_dev.pm_dev); - - atomic_set(&lis3_dev.count, 0); - return 0; -} - -static int lis3lv02d_misc_release(struct inode *inode, struct file *file) -{ - fasync_helper(-1, file, 0, &lis3_dev.async_queue); - clear_bit(0, &lis3_dev.misc_opened); /* release the device */ - if (lis3_dev.pm_dev) - pm_runtime_put(lis3_dev.pm_dev); - return 0; -} - -static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, - size_t count, loff_t *pos) -{ - DECLARE_WAITQUEUE(wait, current); - u32 data; - unsigned char byte_data; - ssize_t retval = 1; - - if (count < 1) - return -EINVAL; - - add_wait_queue(&lis3_dev.misc_wait, &wait); - while (true) { - set_current_state(TASK_INTERRUPTIBLE); - data = atomic_xchg(&lis3_dev.count, 0); - if (data) - break; - - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto out; - } - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - goto out; - } - - schedule(); - } - - if (data < 255) - byte_data = data; - else - byte_data = 255; - - /* make sure we are not going into copy_to_user() with - * TASK_INTERRUPTIBLE state */ - set_current_state(TASK_RUNNING); - if (copy_to_user(buf, &byte_data, sizeof(byte_data))) - retval = -EFAULT; - -out: - __set_current_state(TASK_RUNNING); - remove_wait_queue(&lis3_dev.misc_wait, &wait); - - return retval; -} - -static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) -{ - poll_wait(file, &lis3_dev.misc_wait, wait); - if (atomic_read(&lis3_dev.count)) - return POLLIN | POLLRDNORM; - return 0; -} - -static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) -{ - return fasync_helper(fd, file, on, &lis3_dev.async_queue); -} - -static const struct file_operations lis3lv02d_misc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = lis3lv02d_misc_read, - .open = lis3lv02d_misc_open, - .release = lis3lv02d_misc_release, - .poll = lis3lv02d_misc_poll, - .fasync = lis3lv02d_misc_fasync, -}; - -static struct miscdevice lis3lv02d_misc_device = { - .minor = MISC_DYNAMIC_MINOR, - .name = "freefall", - .fops = &lis3lv02d_misc_fops, -}; - -int lis3lv02d_joystick_enable(void) -{ - struct input_dev *input_dev; - int err; - int max_val, fuzz, flat; - int btns[] = {BTN_X, BTN_Y, BTN_Z}; - - if (lis3_dev.idev) - return -EINVAL; - - lis3_dev.idev = input_allocate_polled_device(); - if (!lis3_dev.idev) - return -ENOMEM; - - lis3_dev.idev->poll = lis3lv02d_joystick_poll; - lis3_dev.idev->open = lis3lv02d_joystick_open; - lis3_dev.idev->close = lis3lv02d_joystick_close; - lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; - lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN; - lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX; - input_dev = lis3_dev.idev->input; - - input_dev->name = "ST LIS3LV02DL Accelerometer"; - input_dev->phys = DRIVER_NAME "/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0; - input_dev->dev.parent = &lis3_dev.pdev->dev; - - set_bit(EV_ABS, input_dev->evbit); - max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY; - if (lis3_dev.whoami == WAI_12B) { - fuzz = LIS3_DEFAULT_FUZZ_12B; - flat = LIS3_DEFAULT_FLAT_12B; - } else { - fuzz = LIS3_DEFAULT_FUZZ_8B; - flat = LIS3_DEFAULT_FLAT_8B; - } - fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY; - flat = (flat * lis3_dev.scale) / LIS3_ACCURACY; - - input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat); - input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat); - input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat); - - lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns); - lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns); - lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns); - - err = input_register_polled_device(lis3_dev.idev); - if (err) { - input_free_polled_device(lis3_dev.idev); - lis3_dev.idev = NULL; - } - - return err; -} -EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable); - -void lis3lv02d_joystick_disable(void) -{ - if (lis3_dev.irq) - free_irq(lis3_dev.irq, &lis3_dev); - if (lis3_dev.pdata && lis3_dev.pdata->irq2) - free_irq(lis3_dev.pdata->irq2, &lis3_dev); - - if (!lis3_dev.idev) - return; - - if (lis3_dev.irq) - misc_deregister(&lis3lv02d_misc_device); - input_unregister_polled_device(lis3_dev.idev); - input_free_polled_device(lis3_dev.idev); - lis3_dev.idev = NULL; -} -EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); - -/* Sysfs stuff */ -static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3) -{ - /* - * SYSFS functions are fast visitors so put-call - * immediately after the get-call. However, keep - * chip running for a while and schedule delayed - * suspend. This way periodic sysfs calls doesn't - * suffer from relatively long power up time. - */ - - if (lis3->pm_dev) { - pm_runtime_get_sync(lis3->pm_dev); - pm_runtime_put_noidle(lis3->pm_dev); - pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY); - } -} - -static ssize_t lis3lv02d_selftest_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - s16 values[3]; - - static const char ok[] = "OK"; - static const char fail[] = "FAIL"; - static const char irq[] = "FAIL_IRQ"; - const char *res; - - lis3lv02d_sysfs_poweron(&lis3_dev); - switch (lis3lv02d_selftest(&lis3_dev, values)) { - case SELFTEST_FAIL: - res = fail; - break; - case SELFTEST_IRQ: - res = irq; - break; - case SELFTEST_OK: - default: - res = ok; - break; - } - return sprintf(buf, "%s %d %d %d\n", res, - values[0], values[1], values[2]); -} - -static ssize_t lis3lv02d_position_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int x, y, z; - - lis3lv02d_sysfs_poweron(&lis3_dev); - mutex_lock(&lis3_dev.mutex); - lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - mutex_unlock(&lis3_dev.mutex); - return sprintf(buf, "(%d,%d,%d)\n", x, y, z); -} - -static ssize_t lis3lv02d_rate_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - lis3lv02d_sysfs_poweron(&lis3_dev); - return sprintf(buf, "%d\n", lis3lv02d_get_odr()); -} - -static ssize_t lis3lv02d_rate_set(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) -{ - unsigned long rate; - - if (strict_strtoul(buf, 0, &rate)) - return -EINVAL; - - lis3lv02d_sysfs_poweron(&lis3_dev); - if (lis3lv02d_set_odr(rate)) - return -EINVAL; - - return count; -} - -static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL); -static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); -static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show, - lis3lv02d_rate_set); - -static struct attribute *lis3lv02d_attributes[] = { - &dev_attr_selftest.attr, - &dev_attr_position.attr, - &dev_attr_rate.attr, - NULL -}; - -static struct attribute_group lis3lv02d_attribute_group = { - .attrs = lis3lv02d_attributes -}; - - -static int lis3lv02d_add_fs(struct lis3lv02d *lis3) -{ - lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); - if (IS_ERR(lis3->pdev)) - return PTR_ERR(lis3->pdev); - - return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); -} - -int lis3lv02d_remove_fs(struct lis3lv02d *lis3) -{ - sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); - platform_device_unregister(lis3->pdev); - if (lis3->pm_dev) { - /* Barrier after the sysfs remove */ - pm_runtime_barrier(lis3->pm_dev); - - /* SYSFS may have left chip running. Turn off if necessary */ - if (!pm_runtime_suspended(lis3->pm_dev)) - lis3lv02d_poweroff(&lis3_dev); - - pm_runtime_disable(lis3->pm_dev); - pm_runtime_set_suspended(lis3->pm_dev); - } - kfree(lis3->reg_cache); - return 0; -} -EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); - -static void lis3lv02d_8b_configure(struct lis3lv02d *dev, - struct lis3lv02d_platform_data *p) -{ - int err; - int ctrl2 = p->hipass_ctrl; - - if (p->click_flags) { - dev->write(dev, CLICK_CFG, p->click_flags); - dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); - dev->write(dev, CLICK_LATENCY, p->click_latency); - dev->write(dev, CLICK_WINDOW, p->click_window); - dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); - dev->write(dev, CLICK_THSY_X, - (p->click_thresh_x & 0xf) | - (p->click_thresh_y << 4)); - - if (dev->idev) { - struct input_dev *input_dev = lis3_dev.idev->input; - input_set_capability(input_dev, EV_KEY, BTN_X); - input_set_capability(input_dev, EV_KEY, BTN_Y); - input_set_capability(input_dev, EV_KEY, BTN_Z); - } - } - - if (p->wakeup_flags) { - dev->write(dev, FF_WU_CFG_1, p->wakeup_flags); - dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f); - /* pdata value + 1 to keep this backward compatible*/ - dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1); - ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/ - } - - if (p->wakeup_flags2) { - dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2); - dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f); - /* pdata value + 1 to keep this backward compatible*/ - dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1); - ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/ - } - /* Configure hipass filters */ - dev->write(dev, CTRL_REG2, ctrl2); - - if (p->irq2) { - err = request_threaded_irq(p->irq2, - NULL, - lis302dl_interrupt_thread2_8b, - IRQF_TRIGGER_RISING | IRQF_ONESHOT | - (p->irq_flags2 & IRQF_TRIGGER_MASK), - DRIVER_NAME, &lis3_dev); - if (err < 0) - pr_err("No second IRQ. Limited functionality\n"); - } -} - -/* - * Initialise the accelerometer and the various subsystems. - * Should be rather independent of the bus system. - */ -int lis3lv02d_init_device(struct lis3lv02d *dev) -{ - int err; - irq_handler_t thread_fn; - int irq_flags = 0; - - dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I); - - switch (dev->whoami) { - case WAI_12B: - pr_info("12 bits sensor found\n"); - dev->read_data = lis3lv02d_read_12; - dev->mdps_max_val = 2048; - dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B; - dev->odrs = lis3_12_rates; - dev->odr_mask = CTRL1_DF0 | CTRL1_DF1; - dev->scale = LIS3_SENSITIVITY_12B; - dev->regs = lis3_wai12_regs; - dev->regs_size = ARRAY_SIZE(lis3_wai12_regs); - break; - case WAI_8B: - pr_info("8 bits sensor found\n"); - dev->read_data = lis3lv02d_read_8; - dev->mdps_max_val = 128; - dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; - dev->odrs = lis3_8_rates; - dev->odr_mask = CTRL1_DR; - dev->scale = LIS3_SENSITIVITY_8B; - dev->regs = lis3_wai8_regs; - dev->regs_size = ARRAY_SIZE(lis3_wai8_regs); - break; - case WAI_3DC: - pr_info("8 bits 3DC sensor found\n"); - dev->read_data = lis3lv02d_read_8; - dev->mdps_max_val = 128; - dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; - dev->odrs = lis3_3dc_rates; - dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3; - dev->scale = LIS3_SENSITIVITY_8B; - break; - default: - pr_err("unknown sensor type 0x%X\n", dev->whoami); - return -EINVAL; - } - - dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs), - sizeof(lis3_wai12_regs)), GFP_KERNEL); - - if (dev->reg_cache == NULL) { - printk(KERN_ERR DRIVER_NAME "out of memory\n"); - return -ENOMEM; - } - - mutex_init(&dev->mutex); - atomic_set(&dev->wake_thread, 0); - - lis3lv02d_add_fs(dev); - lis3lv02d_poweron(dev); - - if (dev->pm_dev) { - pm_runtime_set_active(dev->pm_dev); - pm_runtime_enable(dev->pm_dev); - } - - if (lis3lv02d_joystick_enable()) - pr_err("joystick initialization failed\n"); - - /* passing in platform specific data is purely optional and only - * used by the SPI transport layer at the moment */ - if (dev->pdata) { - struct lis3lv02d_platform_data *p = dev->pdata; - - if (dev->whoami == WAI_8B) - lis3lv02d_8b_configure(dev, p); - - irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK; - - dev->irq_cfg = p->irq_cfg; - if (p->irq_cfg) - dev->write(dev, CTRL_REG3, p->irq_cfg); - - if (p->default_rate) - lis3lv02d_set_odr(p->default_rate); - } - - /* bail if we did not get an IRQ from the bus layer */ - if (!dev->irq) { - pr_debug("No IRQ. Disabling /dev/freefall\n"); - goto out; - } - - /* - * The sensor can generate interrupts for free-fall and direction - * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep - * the things simple and _fast_ we activate it only for free-fall, so - * no need to read register (very slow with ACPI). For the same reason, - * we forbid shared interrupts. - * - * IRQF_TRIGGER_RISING seems pointless on HP laptops because the - * io-apic is not configurable (and generates a warning) but I keep it - * in case of support for other hardware. - */ - if (dev->pdata && dev->whoami == WAI_8B) - thread_fn = lis302dl_interrupt_thread1_8b; - else - thread_fn = NULL; - - err = request_threaded_irq(dev->irq, lis302dl_interrupt, - thread_fn, - IRQF_TRIGGER_RISING | IRQF_ONESHOT | - irq_flags, - DRIVER_NAME, &lis3_dev); - - if (err < 0) { - pr_err("Cannot get IRQ\n"); - goto out; - } - - if (misc_register(&lis3lv02d_misc_device)) - pr_err("misc_register failed\n"); -out: - return 0; -} -EXPORT_SYMBOL_GPL(lis3lv02d_init_device); - -MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); -MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); -MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h deleted file mode 100644 index a1939589eb2c..000000000000 --- a/drivers/hwmon/lis3lv02d.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * lis3lv02d.h - ST LIS3LV02DL accelerometer driver - * - * Copyright (C) 2007-2008 Yan Burman - * Copyright (C) 2008-2009 Eric Piel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -/* - * This driver tries to support the "digital" accelerometer chips from - * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL, - * LIS35DE, or LIS202DL. They are very similar in terms of programming, with - * almost the same registers. In addition to differing on physical properties, - * they differ on the number of axes (2/3), precision (8/12 bits), and special - * features (freefall detection, click...). Unfortunately, not all the - * differences can be probed via a register. - * They can be connected either via I²C or SPI. - */ - -#include - -enum lis3_reg { - WHO_AM_I = 0x0F, - OFFSET_X = 0x16, - OFFSET_Y = 0x17, - OFFSET_Z = 0x18, - GAIN_X = 0x19, - GAIN_Y = 0x1A, - GAIN_Z = 0x1B, - CTRL_REG1 = 0x20, - CTRL_REG2 = 0x21, - CTRL_REG3 = 0x22, - CTRL_REG4 = 0x23, - HP_FILTER_RESET = 0x23, - STATUS_REG = 0x27, - OUTX_L = 0x28, - OUTX_H = 0x29, - OUTX = 0x29, - OUTY_L = 0x2A, - OUTY_H = 0x2B, - OUTY = 0x2B, - OUTZ_L = 0x2C, - OUTZ_H = 0x2D, - OUTZ = 0x2D, -}; - -enum lis302d_reg { - FF_WU_CFG_1 = 0x30, - FF_WU_SRC_1 = 0x31, - FF_WU_THS_1 = 0x32, - FF_WU_DURATION_1 = 0x33, - FF_WU_CFG_2 = 0x34, - FF_WU_SRC_2 = 0x35, - FF_WU_THS_2 = 0x36, - FF_WU_DURATION_2 = 0x37, - CLICK_CFG = 0x38, - CLICK_SRC = 0x39, - CLICK_THSY_X = 0x3B, - CLICK_THSZ = 0x3C, - CLICK_TIMELIMIT = 0x3D, - CLICK_LATENCY = 0x3E, - CLICK_WINDOW = 0x3F, -}; - -enum lis3lv02d_reg { - FF_WU_CFG = 0x30, - FF_WU_SRC = 0x31, - FF_WU_ACK = 0x32, - FF_WU_THS_L = 0x34, - FF_WU_THS_H = 0x35, - FF_WU_DURATION = 0x36, - DD_CFG = 0x38, - DD_SRC = 0x39, - DD_ACK = 0x3A, - DD_THSI_L = 0x3C, - DD_THSI_H = 0x3D, - DD_THSE_L = 0x3E, - DD_THSE_H = 0x3F, -}; - -enum lis3_who_am_i { - WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */ - WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */ - WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */ - WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */ -}; - -enum lis3lv02d_ctrl1_12b { - CTRL1_Xen = 0x01, - CTRL1_Yen = 0x02, - CTRL1_Zen = 0x04, - CTRL1_ST = 0x08, - CTRL1_DF0 = 0x10, - CTRL1_DF1 = 0x20, - CTRL1_PD0 = 0x40, - CTRL1_PD1 = 0x80, -}; - -/* Delta to ctrl1_12b version */ -enum lis3lv02d_ctrl1_8b { - CTRL1_STM = 0x08, - CTRL1_STP = 0x10, - CTRL1_FS = 0x20, - CTRL1_PD = 0x40, - CTRL1_DR = 0x80, -}; - -enum lis3lv02d_ctrl1_3dc { - CTRL1_ODR0 = 0x10, - CTRL1_ODR1 = 0x20, - CTRL1_ODR2 = 0x40, - CTRL1_ODR3 = 0x80, -}; - -enum lis3lv02d_ctrl2 { - CTRL2_DAS = 0x01, - CTRL2_SIM = 0x02, - CTRL2_DRDY = 0x04, - CTRL2_IEN = 0x08, - CTRL2_BOOT = 0x10, - CTRL2_BLE = 0x20, - CTRL2_BDU = 0x40, /* Block Data Update */ - CTRL2_FS = 0x80, /* Full Scale selection */ -}; - -enum lis3lv02d_ctrl4_3dc { - CTRL4_SIM = 0x01, - CTRL4_ST0 = 0x02, - CTRL4_ST1 = 0x04, - CTRL4_FS0 = 0x10, - CTRL4_FS1 = 0x20, -}; - -enum lis302d_ctrl2 { - HP_FF_WU2 = 0x08, - HP_FF_WU1 = 0x04, - CTRL2_BOOT_8B = 0x40, -}; - -enum lis3lv02d_ctrl3 { - CTRL3_CFS0 = 0x01, - CTRL3_CFS1 = 0x02, - CTRL3_FDS = 0x10, - CTRL3_HPFF = 0x20, - CTRL3_HPDD = 0x40, - CTRL3_ECK = 0x80, -}; - -enum lis3lv02d_status_reg { - STATUS_XDA = 0x01, - STATUS_YDA = 0x02, - STATUS_ZDA = 0x04, - STATUS_XYZDA = 0x08, - STATUS_XOR = 0x10, - STATUS_YOR = 0x20, - STATUS_ZOR = 0x40, - STATUS_XYZOR = 0x80, -}; - -enum lis3lv02d_ff_wu_cfg { - FF_WU_CFG_XLIE = 0x01, - FF_WU_CFG_XHIE = 0x02, - FF_WU_CFG_YLIE = 0x04, - FF_WU_CFG_YHIE = 0x08, - FF_WU_CFG_ZLIE = 0x10, - FF_WU_CFG_ZHIE = 0x20, - FF_WU_CFG_LIR = 0x40, - FF_WU_CFG_AOI = 0x80, -}; - -enum lis3lv02d_ff_wu_src { - FF_WU_SRC_XL = 0x01, - FF_WU_SRC_XH = 0x02, - FF_WU_SRC_YL = 0x04, - FF_WU_SRC_YH = 0x08, - FF_WU_SRC_ZL = 0x10, - FF_WU_SRC_ZH = 0x20, - FF_WU_SRC_IA = 0x40, -}; - -enum lis3lv02d_dd_cfg { - DD_CFG_XLIE = 0x01, - DD_CFG_XHIE = 0x02, - DD_CFG_YLIE = 0x04, - DD_CFG_YHIE = 0x08, - DD_CFG_ZLIE = 0x10, - DD_CFG_ZHIE = 0x20, - DD_CFG_LIR = 0x40, - DD_CFG_IEND = 0x80, -}; - -enum lis3lv02d_dd_src { - DD_SRC_XL = 0x01, - DD_SRC_XH = 0x02, - DD_SRC_YL = 0x04, - DD_SRC_YH = 0x08, - DD_SRC_ZL = 0x10, - DD_SRC_ZH = 0x20, - DD_SRC_IA = 0x40, -}; - -enum lis3lv02d_click_src_8b { - CLICK_SINGLE_X = 0x01, - CLICK_DOUBLE_X = 0x02, - CLICK_SINGLE_Y = 0x04, - CLICK_DOUBLE_Y = 0x08, - CLICK_SINGLE_Z = 0x10, - CLICK_DOUBLE_Z = 0x20, - CLICK_IA = 0x40, -}; - -enum lis3lv02d_reg_state { - LIS3_REG_OFF = 0x00, - LIS3_REG_ON = 0x01, -}; - -union axis_conversion { - struct { - int x, y, z; - }; - int as_array[3]; - -}; - -struct lis3lv02d { - void *bus_priv; /* used by the bus layer only */ - struct device *pm_dev; /* for pm_runtime purposes */ - int (*init) (struct lis3lv02d *lis3); - int (*write) (struct lis3lv02d *lis3, int reg, u8 val); - int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret); - int (*blkread) (struct lis3lv02d *lis3, int reg, int len, u8 *ret); - int (*reg_ctrl) (struct lis3lv02d *lis3, bool state); - - int *odrs; /* Supported output data rates */ - u8 *regs; /* Regs to store / restore */ - int regs_size; - u8 *reg_cache; - bool regs_stored; - u8 odr_mask; /* ODR bit mask */ - u8 whoami; /* indicates measurement precision */ - s16 (*read_data) (struct lis3lv02d *lis3, int reg); - int mdps_max_val; - int pwron_delay; - int scale; /* - * relationship between 1 LBS and mG - * (1/1000th of earth gravity) - */ - - struct input_polled_dev *idev; /* input device */ - struct platform_device *pdev; /* platform device */ - struct regulator_bulk_data regulators[2]; - atomic_t count; /* interrupt count after last read */ - union axis_conversion ac; /* hw -> logical axis */ - int mapped_btns[3]; - - u32 irq; /* IRQ number */ - struct fasync_struct *async_queue; /* queue for the misc device */ - wait_queue_head_t misc_wait; /* Wait queue for the misc device */ - unsigned long misc_opened; /* bit0: whether the device is open */ - int data_ready_count[2]; - atomic_t wake_thread; - unsigned char irq_cfg; - - struct lis3lv02d_platform_data *pdata; /* for passing board config */ - struct mutex mutex; /* Serialize poll and selftest */ -}; - -int lis3lv02d_init_device(struct lis3lv02d *lis3); -int lis3lv02d_joystick_enable(void); -void lis3lv02d_joystick_disable(void); -void lis3lv02d_poweroff(struct lis3lv02d *lis3); -void lis3lv02d_poweron(struct lis3lv02d *lis3); -int lis3lv02d_remove_fs(struct lis3lv02d *lis3); - -extern struct lis3lv02d lis3_dev; diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c deleted file mode 100644 index 8853afce85ce..000000000000 --- a/drivers/hwmon/lis3lv02d_i2c.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * drivers/hwmon/lis3lv02d_i2c.c - * - * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. - * Driver is based on corresponding SPI driver written by Daniel Mack - * (lis3lv02d_spi.c (C) 2009 Daniel Mack ). - * - * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Samu Onkalo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include "lis3lv02d.h" - -#define DRV_NAME "lis3lv02d_i2c" - -static const char reg_vdd[] = "Vdd"; -static const char reg_vdd_io[] = "Vdd_IO"; - -static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state) -{ - int ret; - if (state == LIS3_REG_OFF) { - ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators), - lis3->regulators); - } else { - ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators), - lis3->regulators); - /* Chip needs time to wakeup. Not mentioned in datasheet */ - usleep_range(10000, 20000); - } - return ret; -} - -static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) -{ - struct i2c_client *c = lis3->bus_priv; - return i2c_smbus_write_byte_data(c, reg, value); -} - -static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) -{ - struct i2c_client *c = lis3->bus_priv; - *v = i2c_smbus_read_byte_data(c, reg); - return 0; -} - -static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len, - u8 *v) -{ - struct i2c_client *c = lis3->bus_priv; - reg |= (1 << 7); /* 7th bit enables address auto incrementation */ - return i2c_smbus_read_i2c_block_data(c, reg, len, v); -} - -static int lis3_i2c_init(struct lis3lv02d *lis3) -{ - u8 reg; - int ret; - - if (lis3->reg_ctrl) - lis3_reg_ctrl(lis3, LIS3_REG_ON); - - lis3->read(lis3, WHO_AM_I, ®); - if (reg != lis3->whoami) - printk(KERN_ERR "lis3: power on failure\n"); - - /* power up the device */ - ret = lis3->read(lis3, CTRL_REG1, ®); - if (ret < 0) - return ret; - - reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; - return lis3->write(lis3, CTRL_REG1, reg); -} - -/* Default axis mapping but it can be overwritten by platform data */ -static union axis_conversion lis3lv02d_axis_map = - { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } }; - -static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int ret = 0; - struct lis3lv02d_platform_data *pdata = client->dev.platform_data; - - if (pdata) { - /* Regulator control is optional */ - if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL) - lis3_dev.reg_ctrl = lis3_reg_ctrl; - - if ((pdata->driver_features & LIS3_USE_BLOCK_READ) && - (i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_I2C_BLOCK))) - lis3_dev.blkread = lis3_i2c_blockread; - - if (pdata->axis_x) - lis3lv02d_axis_map.x = pdata->axis_x; - - if (pdata->axis_y) - lis3lv02d_axis_map.y = pdata->axis_y; - - if (pdata->axis_z) - lis3lv02d_axis_map.z = pdata->axis_z; - - if (pdata->setup_resources) - ret = pdata->setup_resources(); - - if (ret) - goto fail; - } - - if (lis3_dev.reg_ctrl) { - lis3_dev.regulators[0].supply = reg_vdd; - lis3_dev.regulators[1].supply = reg_vdd_io; - ret = regulator_bulk_get(&client->dev, - ARRAY_SIZE(lis3_dev.regulators), - lis3_dev.regulators); - if (ret < 0) - goto fail; - } - - lis3_dev.pdata = pdata; - lis3_dev.bus_priv = client; - lis3_dev.init = lis3_i2c_init; - lis3_dev.read = lis3_i2c_read; - lis3_dev.write = lis3_i2c_write; - lis3_dev.irq = client->irq; - lis3_dev.ac = lis3lv02d_axis_map; - lis3_dev.pm_dev = &client->dev; - - i2c_set_clientdata(client, &lis3_dev); - - /* Provide power over the init call */ - if (lis3_dev.reg_ctrl) - lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON); - - ret = lis3lv02d_init_device(&lis3_dev); - - if (lis3_dev.reg_ctrl) - lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF); - - if (ret == 0) - return 0; -fail: - if (pdata && pdata->release_resources) - pdata->release_resources(); - return ret; -} - -static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) -{ - struct lis3lv02d *lis3 = i2c_get_clientdata(client); - struct lis3lv02d_platform_data *pdata = client->dev.platform_data; - - if (pdata && pdata->release_resources) - pdata->release_resources(); - - lis3lv02d_joystick_disable(); - lis3lv02d_remove_fs(&lis3_dev); - - if (lis3_dev.reg_ctrl) - regulator_bulk_free(ARRAY_SIZE(lis3->regulators), - lis3_dev.regulators); - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int lis3lv02d_i2c_suspend(struct device *dev) -{ - struct i2c_client *client = container_of(dev, struct i2c_client, dev); - struct lis3lv02d *lis3 = i2c_get_clientdata(client); - - if (!lis3->pdata || !lis3->pdata->wakeup_flags) - lis3lv02d_poweroff(lis3); - return 0; -} - -static int lis3lv02d_i2c_resume(struct device *dev) -{ - struct i2c_client *client = container_of(dev, struct i2c_client, dev); - struct lis3lv02d *lis3 = i2c_get_clientdata(client); - - /* - * pm_runtime documentation says that devices should always - * be powered on at resume. Pm_runtime turns them off after system - * wide resume is complete. - */ - if (!lis3->pdata || !lis3->pdata->wakeup_flags || - pm_runtime_suspended(dev)) - lis3lv02d_poweron(lis3); - - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - -#ifdef CONFIG_PM_RUNTIME -static int lis3_i2c_runtime_suspend(struct device *dev) -{ - struct i2c_client *client = container_of(dev, struct i2c_client, dev); - struct lis3lv02d *lis3 = i2c_get_clientdata(client); - - lis3lv02d_poweroff(lis3); - return 0; -} - -static int lis3_i2c_runtime_resume(struct device *dev) -{ - struct i2c_client *client = container_of(dev, struct i2c_client, dev); - struct lis3lv02d *lis3 = i2c_get_clientdata(client); - - lis3lv02d_poweron(lis3); - return 0; -} -#endif /* CONFIG_PM_RUNTIME */ - -static const struct i2c_device_id lis3lv02d_id[] = { - {"lis3lv02d", 0 }, - {} -}; - -MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); - -static const struct dev_pm_ops lis3_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend, - lis3lv02d_i2c_resume) - SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend, - lis3_i2c_runtime_resume, - NULL) -}; - -static struct i2c_driver lis3lv02d_i2c_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = &lis3_pm_ops, - }, - .probe = lis3lv02d_i2c_probe, - .remove = __devexit_p(lis3lv02d_i2c_remove), - .id_table = lis3lv02d_id, -}; - -static int __init lis3lv02d_init(void) -{ - return i2c_add_driver(&lis3lv02d_i2c_driver); -} - -static void __exit lis3lv02d_exit(void) -{ - i2c_del_driver(&lis3lv02d_i2c_driver); -} - -MODULE_AUTHOR("Nokia Corporation"); -MODULE_DESCRIPTION("lis3lv02d I2C interface"); -MODULE_LICENSE("GPL"); - -module_init(lis3lv02d_init); -module_exit(lis3lv02d_exit); diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c deleted file mode 100644 index c1f8a8fbf694..000000000000 --- a/drivers/hwmon/lis3lv02d_spi.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * lis3lv02d_spi - SPI glue layer for lis3lv02d - * - * Copyright (c) 2009 Daniel Mack - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "lis3lv02d.h" - -#define DRV_NAME "lis3lv02d_spi" -#define LIS3_SPI_READ 0x80 - -static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v) -{ - struct spi_device *spi = lis3->bus_priv; - int ret = spi_w8r8(spi, reg | LIS3_SPI_READ); - if (ret < 0) - return -EINVAL; - - *v = (u8) ret; - return 0; -} - -static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val) -{ - u8 tmp[2] = { reg, val }; - struct spi_device *spi = lis3->bus_priv; - return spi_write(spi, tmp, sizeof(tmp)); -} - -static int lis3_spi_init(struct lis3lv02d *lis3) -{ - u8 reg; - int ret; - - /* power up the device */ - ret = lis3->read(lis3, CTRL_REG1, ®); - if (ret < 0) - return ret; - - reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; - return lis3->write(lis3, CTRL_REG1, reg); -} - -static union axis_conversion lis3lv02d_axis_normal = - { .as_array = { 1, 2, 3 } }; - -static int __devinit lis302dl_spi_probe(struct spi_device *spi) -{ - int ret; - - spi->bits_per_word = 8; - spi->mode = SPI_MODE_0; - ret = spi_setup(spi); - if (ret < 0) - return ret; - - lis3_dev.bus_priv = spi; - lis3_dev.init = lis3_spi_init; - lis3_dev.read = lis3_spi_read; - lis3_dev.write = lis3_spi_write; - lis3_dev.irq = spi->irq; - lis3_dev.ac = lis3lv02d_axis_normal; - lis3_dev.pdata = spi->dev.platform_data; - spi_set_drvdata(spi, &lis3_dev); - - return lis3lv02d_init_device(&lis3_dev); -} - -static int __devexit lis302dl_spi_remove(struct spi_device *spi) -{ - struct lis3lv02d *lis3 = spi_get_drvdata(spi); - lis3lv02d_joystick_disable(); - lis3lv02d_poweroff(lis3); - - return lis3lv02d_remove_fs(&lis3_dev); -} - -#ifdef CONFIG_PM_SLEEP -static int lis3lv02d_spi_suspend(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct lis3lv02d *lis3 = spi_get_drvdata(spi); - - if (!lis3->pdata || !lis3->pdata->wakeup_flags) - lis3lv02d_poweroff(&lis3_dev); - - return 0; -} - -static int lis3lv02d_spi_resume(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct lis3lv02d *lis3 = spi_get_drvdata(spi); - - if (!lis3->pdata || !lis3->pdata->wakeup_flags) - lis3lv02d_poweron(lis3); - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend, - lis3lv02d_spi_resume); - -static struct spi_driver lis302dl_spi_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = &lis3lv02d_spi_pm, - }, - .probe = lis302dl_spi_probe, - .remove = __devexit_p(lis302dl_spi_remove), -}; - -static int __init lis302dl_init(void) -{ - return spi_register_driver(&lis302dl_spi_driver); -} - -static void __exit lis302dl_exit(void) -{ - spi_unregister_driver(&lis302dl_spi_driver); -} - -module_init(lis302dl_init); -module_exit(lis302dl_exit); - -MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("lis3lv02d SPI glue layer"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:" DRV_NAME); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b7d5ef234ac9..203500d9b848 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -2,6 +2,14 @@ # Misc strange devices # +# This one has to live outside of the MISC_DEVICES conditional, +# because it may be selected by drivers/platform/x86/hp_accel. +config SENSORS_LIS3LV02D + tristate + depends on INPUT + select INPUT_POLLDEV + default n + menuconfig MISC_DEVICES bool "Misc devices" ---help--- @@ -462,5 +470,6 @@ source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" +source "drivers/misc/lis3lv02d/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 98009cc20cb9..804f421bc079 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -42,3 +42,4 @@ obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o +obj-y += lis3lv02d/ diff --git a/drivers/misc/lis3lv02d/Kconfig b/drivers/misc/lis3lv02d/Kconfig new file mode 100644 index 000000000000..8f474e6fc7b4 --- /dev/null +++ b/drivers/misc/lis3lv02d/Kconfig @@ -0,0 +1,37 @@ +# +# STMicroelectonics LIS3LV02D and similar accelerometers +# + +config SENSORS_LIS3_SPI + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" + depends on !ACPI && SPI_MASTER && INPUT + select SENSORS_LIS3LV02D + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via SPI. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the SPI transport + is called lis3lv02d_spi. + +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select SENSORS_LIS3LV02D + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. diff --git a/drivers/misc/lis3lv02d/Makefile b/drivers/misc/lis3lv02d/Makefile new file mode 100644 index 000000000000..4bf58b16fcf8 --- /dev/null +++ b/drivers/misc/lis3lv02d/Makefile @@ -0,0 +1,7 @@ +# +# STMicroelectonics LIS3LV02D and similar accelerometers +# + +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o +obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d_i2c.o diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c new file mode 100644 index 000000000000..b928bc14e97b --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d.c @@ -0,0 +1,999 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * Copyright (C) 2008-2009 Pavel Machek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +#define MDPS_POLL_MIN 0 +#define MDPS_POLL_MAX 2000 + +#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */ + +#define SELFTEST_OK 0 +#define SELFTEST_FAIL -1 +#define SELFTEST_IRQ -2 + +#define IRQ_LINE0 0 +#define IRQ_LINE1 1 + +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because they are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +#define LIS3_PWRON_DELAY_WAI_12B (5000) +#define LIS3_PWRON_DELAY_WAI_8B (3000) + +/* + * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG + * LIS302D spec says: 18 mG / digit + * LIS3_ACCURACY is used to increase accuracy of the intermediate + * calculation results. + */ +#define LIS3_ACCURACY 1024 +/* Sensitivity values for -2G +2G scale */ +#define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024) +#define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY) + +#define LIS3_DEFAULT_FUZZ_12B 3 +#define LIS3_DEFAULT_FLAT_12B 3 +#define LIS3_DEFAULT_FUZZ_8B 1 +#define LIS3_DEFAULT_FLAT_8B 1 + +struct lis3lv02d lis3_dev = { + .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait), +}; +EXPORT_SYMBOL_GPL(lis3_dev); + +/* just like param_set_int() but does sanity-check so that it won't point + * over the axis array size + */ +static int param_set_axis(const char *val, const struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + if (!ret) { + int val = *(int *)kp->arg; + if (val < 0) + val = -val; + if (!val || val > 3) + return -EINVAL; + } + return ret; +} + +static struct kernel_param_ops param_ops_axis = { + .set = param_set_axis, + .get = param_get_int, +}; + +module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644); +MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions"); + +static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg) +{ + s8 lo; + if (lis3->read(lis3, reg, &lo) < 0) + return 0; + + return lo; +} + +static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg) +{ + u8 lo, hi; + + lis3->read(lis3, reg - 1, &lo); + lis3->read(lis3, reg, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @lis3: pointer to the device struct + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z) +{ + int position[3]; + int i; + + if (lis3->blkread) { + if (lis3_dev.whoami == WAI_12B) { + u16 data[3]; + lis3->blkread(lis3, OUTX_L, 6, (u8 *)data); + for (i = 0; i < 3; i++) + position[i] = (s16)le16_to_cpu(data[i]); + } else { + u8 data[5]; + /* Data: x, dummy, y, dummy, z */ + lis3->blkread(lis3, OUTX, 5, data); + for (i = 0; i < 3; i++) + position[i] = (s8)data[i * 2]; + } + } else { + position[0] = lis3->read_data(lis3, OUTX); + position[1] = lis3->read_data(lis3, OUTY); + position[2] = lis3->read_data(lis3, OUTZ); + } + + for (i = 0; i < 3; i++) + position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY; + + *x = lis3lv02d_get_axis(lis3->ac.x, position); + *y = lis3lv02d_get_axis(lis3->ac.y, position); + *z = lis3lv02d_get_axis(lis3->ac.z, position); +} + +/* conversion btw sampling rate and the register values */ +static int lis3_12_rates[4] = {40, 160, 640, 2560}; +static int lis3_8_rates[2] = {100, 400}; +static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000}; + +/* ODR is Output Data Rate */ +static int lis3lv02d_get_odr(void) +{ + u8 ctrl; + int shift; + + lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); + ctrl &= lis3_dev.odr_mask; + shift = ffs(lis3_dev.odr_mask) - 1; + return lis3_dev.odrs[(ctrl >> shift)]; +} + +static int lis3lv02d_set_odr(int rate) +{ + u8 ctrl; + int i, len, shift; + + if (!rate) + return -EINVAL; + + lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); + ctrl &= ~lis3_dev.odr_mask; + len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */ + shift = ffs(lis3_dev.odr_mask) - 1; + + for (i = 0; i < len; i++) + if (lis3_dev.odrs[i] == rate) { + lis3_dev.write(&lis3_dev, CTRL_REG1, + ctrl | (i << shift)); + return 0; + } + return -EINVAL; +} + +static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3]) +{ + u8 ctlreg, reg; + s16 x, y, z; + u8 selftest; + int ret; + u8 ctrl_reg_data; + unsigned char irq_cfg; + + mutex_lock(&lis3->mutex); + + irq_cfg = lis3->irq_cfg; + if (lis3_dev.whoami == WAI_8B) { + lis3->data_ready_count[IRQ_LINE0] = 0; + lis3->data_ready_count[IRQ_LINE1] = 0; + + /* Change interrupt cfg to data ready for selftest */ + atomic_inc(&lis3_dev.wake_thread); + lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY; + lis3->read(lis3, CTRL_REG3, &ctrl_reg_data); + lis3->write(lis3, CTRL_REG3, (ctrl_reg_data & + ~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) | + (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY)); + } + + if (lis3_dev.whoami == WAI_3DC) { + ctlreg = CTRL_REG4; + selftest = CTRL4_ST0; + } else { + ctlreg = CTRL_REG1; + if (lis3_dev.whoami == WAI_12B) + selftest = CTRL1_ST; + else + selftest = CTRL1_STP; + } + + lis3->read(lis3, ctlreg, ®); + lis3->write(lis3, ctlreg, (reg | selftest)); + msleep(lis3->pwron_delay / lis3lv02d_get_odr()); + + /* Read directly to avoid axis remap */ + x = lis3->read_data(lis3, OUTX); + y = lis3->read_data(lis3, OUTY); + z = lis3->read_data(lis3, OUTZ); + + /* back to normal settings */ + lis3->write(lis3, ctlreg, reg); + msleep(lis3->pwron_delay / lis3lv02d_get_odr()); + + results[0] = x - lis3->read_data(lis3, OUTX); + results[1] = y - lis3->read_data(lis3, OUTY); + results[2] = z - lis3->read_data(lis3, OUTZ); + + ret = 0; + + if (lis3_dev.whoami == WAI_8B) { + /* Restore original interrupt configuration */ + atomic_dec(&lis3_dev.wake_thread); + lis3->write(lis3, CTRL_REG3, ctrl_reg_data); + lis3->irq_cfg = irq_cfg; + + if ((irq_cfg & LIS3_IRQ1_MASK) && + lis3->data_ready_count[IRQ_LINE0] < 2) { + ret = SELFTEST_IRQ; + goto fail; + } + + if ((irq_cfg & LIS3_IRQ2_MASK) && + lis3->data_ready_count[IRQ_LINE1] < 2) { + ret = SELFTEST_IRQ; + goto fail; + } + } + + if (lis3->pdata) { + int i; + for (i = 0; i < 3; i++) { + /* Check against selftest acceptance limits */ + if ((results[i] < lis3->pdata->st_min_limits[i]) || + (results[i] > lis3->pdata->st_max_limits[i])) { + ret = SELFTEST_FAIL; + goto fail; + } + } + } + + /* test passed */ +fail: + mutex_unlock(&lis3->mutex); + return ret; +} + +/* + * Order of registers in the list affects to order of the restore process. + * Perhaps it is a good idea to set interrupt enable register as a last one + * after all other configurations + */ +static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1, + FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2, + CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ, + CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW, + CTRL_REG1, CTRL_REG2, CTRL_REG3}; + +static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H, + FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H, + DD_THSE_L, DD_THSE_H, + CTRL_REG1, CTRL_REG3, CTRL_REG2}; + +static inline void lis3_context_save(struct lis3lv02d *lis3) +{ + int i; + for (i = 0; i < lis3->regs_size; i++) + lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]); + lis3->regs_stored = true; +} + +static inline void lis3_context_restore(struct lis3lv02d *lis3) +{ + int i; + if (lis3->regs_stored) + for (i = 0; i < lis3->regs_size; i++) + lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]); +} + +void lis3lv02d_poweroff(struct lis3lv02d *lis3) +{ + if (lis3->reg_ctrl) + lis3_context_save(lis3); + /* disable X,Y,Z axis and power down */ + lis3->write(lis3, CTRL_REG1, 0x00); + if (lis3->reg_ctrl) + lis3->reg_ctrl(lis3, LIS3_REG_OFF); +} +EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); + +void lis3lv02d_poweron(struct lis3lv02d *lis3) +{ + u8 reg; + + lis3->init(lis3); + + /* + * Common configuration + * BDU: (12 bits sensors only) LSB and MSB values are not updated until + * both have been read. So the value read will always be correct. + * Set BOOT bit to refresh factory tuning values. + */ + lis3->read(lis3, CTRL_REG2, ®); + if (lis3->whoami == WAI_12B) + reg |= CTRL2_BDU | CTRL2_BOOT; + else + reg |= CTRL2_BOOT_8B; + lis3->write(lis3, CTRL_REG2, reg); + + /* LIS3 power on delay is quite long */ + msleep(lis3->pwron_delay / lis3lv02d_get_odr()); + + if (lis3->reg_ctrl) + lis3_context_restore(lis3); +} +EXPORT_SYMBOL_GPL(lis3lv02d_poweron); + + +static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) +{ + int x, y, z; + + mutex_lock(&lis3_dev.mutex); + lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); + input_report_abs(pidev->input, ABS_X, x); + input_report_abs(pidev->input, ABS_Y, y); + input_report_abs(pidev->input, ABS_Z, z); + input_sync(pidev->input); + mutex_unlock(&lis3_dev.mutex); +} + +static void lis3lv02d_joystick_open(struct input_polled_dev *pidev) +{ + if (lis3_dev.pm_dev) + pm_runtime_get_sync(lis3_dev.pm_dev); + + if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev) + atomic_set(&lis3_dev.wake_thread, 1); + /* + * Update coordinates for the case where poll interval is 0 and + * the chip in running purely under interrupt control + */ + lis3lv02d_joystick_poll(pidev); +} + +static void lis3lv02d_joystick_close(struct input_polled_dev *pidev) +{ + atomic_set(&lis3_dev.wake_thread, 0); + if (lis3_dev.pm_dev) + pm_runtime_put(lis3_dev.pm_dev); +} + +static irqreturn_t lis302dl_interrupt(int irq, void *dummy) +{ + if (!test_bit(0, &lis3_dev.misc_opened)) + goto out; + + /* + * Be careful: on some HP laptops the bios force DD when on battery and + * the lid is closed. This leads to interrupts as soon as a little move + * is done. + */ + atomic_inc(&lis3_dev.count); + + wake_up_interruptible(&lis3_dev.misc_wait); + kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN); +out: + if (atomic_read(&lis3_dev.wake_thread)) + return IRQ_WAKE_THREAD; + return IRQ_HANDLED; +} + +static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3) +{ + struct input_dev *dev = lis3->idev->input; + u8 click_src; + + mutex_lock(&lis3->mutex); + lis3->read(lis3, CLICK_SRC, &click_src); + + if (click_src & CLICK_SINGLE_X) { + input_report_key(dev, lis3->mapped_btns[0], 1); + input_report_key(dev, lis3->mapped_btns[0], 0); + } + + if (click_src & CLICK_SINGLE_Y) { + input_report_key(dev, lis3->mapped_btns[1], 1); + input_report_key(dev, lis3->mapped_btns[1], 0); + } + + if (click_src & CLICK_SINGLE_Z) { + input_report_key(dev, lis3->mapped_btns[2], 1); + input_report_key(dev, lis3->mapped_btns[2], 0); + } + input_sync(dev); + mutex_unlock(&lis3->mutex); +} + +static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index) +{ + int dummy; + + /* Dummy read to ack interrupt */ + lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy); + lis3->data_ready_count[index]++; +} + +static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data) +{ + struct lis3lv02d *lis3 = data; + u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK; + + if (irq_cfg == LIS3_IRQ1_CLICK) + lis302dl_interrupt_handle_click(lis3); + else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY)) + lis302dl_data_ready(lis3, IRQ_LINE0); + else + lis3lv02d_joystick_poll(lis3->idev); + + return IRQ_HANDLED; +} + +static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data) +{ + struct lis3lv02d *lis3 = data; + u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK; + + if (irq_cfg == LIS3_IRQ2_CLICK) + lis302dl_interrupt_handle_click(lis3); + else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY)) + lis302dl_data_ready(lis3, IRQ_LINE1); + else + lis3lv02d_joystick_poll(lis3->idev); + + return IRQ_HANDLED; +} + +static int lis3lv02d_misc_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &lis3_dev.misc_opened)) + return -EBUSY; /* already open */ + + if (lis3_dev.pm_dev) + pm_runtime_get_sync(lis3_dev.pm_dev); + + atomic_set(&lis3_dev.count, 0); + return 0; +} + +static int lis3lv02d_misc_release(struct inode *inode, struct file *file) +{ + fasync_helper(-1, file, 0, &lis3_dev.async_queue); + clear_bit(0, &lis3_dev.misc_opened); /* release the device */ + if (lis3_dev.pm_dev) + pm_runtime_put(lis3_dev.pm_dev); + return 0; +} + +static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + DECLARE_WAITQUEUE(wait, current); + u32 data; + unsigned char byte_data; + ssize_t retval = 1; + + if (count < 1) + return -EINVAL; + + add_wait_queue(&lis3_dev.misc_wait, &wait); + while (true) { + set_current_state(TASK_INTERRUPTIBLE); + data = atomic_xchg(&lis3_dev.count, 0); + if (data) + break; + + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto out; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + goto out; + } + + schedule(); + } + + if (data < 255) + byte_data = data; + else + byte_data = 255; + + /* make sure we are not going into copy_to_user() with + * TASK_INTERRUPTIBLE state */ + set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &byte_data, sizeof(byte_data))) + retval = -EFAULT; + +out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&lis3_dev.misc_wait, &wait); + + return retval; +} + +static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &lis3_dev.misc_wait, wait); + if (atomic_read(&lis3_dev.count)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) +{ + return fasync_helper(fd, file, on, &lis3_dev.async_queue); +} + +static const struct file_operations lis3lv02d_misc_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = lis3lv02d_misc_read, + .open = lis3lv02d_misc_open, + .release = lis3lv02d_misc_release, + .poll = lis3lv02d_misc_poll, + .fasync = lis3lv02d_misc_fasync, +}; + +static struct miscdevice lis3lv02d_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "freefall", + .fops = &lis3lv02d_misc_fops, +}; + +int lis3lv02d_joystick_enable(void) +{ + struct input_dev *input_dev; + int err; + int max_val, fuzz, flat; + int btns[] = {BTN_X, BTN_Y, BTN_Z}; + + if (lis3_dev.idev) + return -EINVAL; + + lis3_dev.idev = input_allocate_polled_device(); + if (!lis3_dev.idev) + return -ENOMEM; + + lis3_dev.idev->poll = lis3lv02d_joystick_poll; + lis3_dev.idev->open = lis3lv02d_joystick_open; + lis3_dev.idev->close = lis3lv02d_joystick_close; + lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; + lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN; + lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX; + input_dev = lis3_dev.idev->input; + + input_dev->name = "ST LIS3LV02DL Accelerometer"; + input_dev->phys = DRIVER_NAME "/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0; + input_dev->dev.parent = &lis3_dev.pdev->dev; + + set_bit(EV_ABS, input_dev->evbit); + max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY; + if (lis3_dev.whoami == WAI_12B) { + fuzz = LIS3_DEFAULT_FUZZ_12B; + flat = LIS3_DEFAULT_FLAT_12B; + } else { + fuzz = LIS3_DEFAULT_FUZZ_8B; + flat = LIS3_DEFAULT_FLAT_8B; + } + fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY; + flat = (flat * lis3_dev.scale) / LIS3_ACCURACY; + + input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat); + input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat); + input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat); + + lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns); + lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns); + lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns); + + err = input_register_polled_device(lis3_dev.idev); + if (err) { + input_free_polled_device(lis3_dev.idev); + lis3_dev.idev = NULL; + } + + return err; +} +EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable); + +void lis3lv02d_joystick_disable(void) +{ + if (lis3_dev.irq) + free_irq(lis3_dev.irq, &lis3_dev); + if (lis3_dev.pdata && lis3_dev.pdata->irq2) + free_irq(lis3_dev.pdata->irq2, &lis3_dev); + + if (!lis3_dev.idev) + return; + + if (lis3_dev.irq) + misc_deregister(&lis3lv02d_misc_device); + input_unregister_polled_device(lis3_dev.idev); + input_free_polled_device(lis3_dev.idev); + lis3_dev.idev = NULL; +} +EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); + +/* Sysfs stuff */ +static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3) +{ + /* + * SYSFS functions are fast visitors so put-call + * immediately after the get-call. However, keep + * chip running for a while and schedule delayed + * suspend. This way periodic sysfs calls doesn't + * suffer from relatively long power up time. + */ + + if (lis3->pm_dev) { + pm_runtime_get_sync(lis3->pm_dev); + pm_runtime_put_noidle(lis3->pm_dev); + pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY); + } +} + +static ssize_t lis3lv02d_selftest_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + s16 values[3]; + + static const char ok[] = "OK"; + static const char fail[] = "FAIL"; + static const char irq[] = "FAIL_IRQ"; + const char *res; + + lis3lv02d_sysfs_poweron(&lis3_dev); + switch (lis3lv02d_selftest(&lis3_dev, values)) { + case SELFTEST_FAIL: + res = fail; + break; + case SELFTEST_IRQ: + res = irq; + break; + case SELFTEST_OK: + default: + res = ok; + break; + } + return sprintf(buf, "%s %d %d %d\n", res, + values[0], values[1], values[2]); +} + +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_sysfs_poweron(&lis3_dev); + mutex_lock(&lis3_dev.mutex); + lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); + mutex_unlock(&lis3_dev.mutex); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + lis3lv02d_sysfs_poweron(&lis3_dev); + return sprintf(buf, "%d\n", lis3lv02d_get_odr()); +} + +static ssize_t lis3lv02d_rate_set(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + unsigned long rate; + + if (strict_strtoul(buf, 0, &rate)) + return -EINVAL; + + lis3lv02d_sysfs_poweron(&lis3_dev); + if (lis3lv02d_set_odr(rate)) + return -EINVAL; + + return count; +} + +static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL); +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show, + lis3lv02d_rate_set); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_selftest.attr, + &dev_attr_position.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + + +static int lis3lv02d_add_fs(struct lis3lv02d *lis3) +{ + lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(lis3->pdev)) + return PTR_ERR(lis3->pdev); + + return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +int lis3lv02d_remove_fs(struct lis3lv02d *lis3) +{ + sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(lis3->pdev); + if (lis3->pm_dev) { + /* Barrier after the sysfs remove */ + pm_runtime_barrier(lis3->pm_dev); + + /* SYSFS may have left chip running. Turn off if necessary */ + if (!pm_runtime_suspended(lis3->pm_dev)) + lis3lv02d_poweroff(&lis3_dev); + + pm_runtime_disable(lis3->pm_dev); + pm_runtime_set_suspended(lis3->pm_dev); + } + kfree(lis3->reg_cache); + return 0; +} +EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); + +static void lis3lv02d_8b_configure(struct lis3lv02d *dev, + struct lis3lv02d_platform_data *p) +{ + int err; + int ctrl2 = p->hipass_ctrl; + + if (p->click_flags) { + dev->write(dev, CLICK_CFG, p->click_flags); + dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); + dev->write(dev, CLICK_LATENCY, p->click_latency); + dev->write(dev, CLICK_WINDOW, p->click_window); + dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); + dev->write(dev, CLICK_THSY_X, + (p->click_thresh_x & 0xf) | + (p->click_thresh_y << 4)); + + if (dev->idev) { + struct input_dev *input_dev = lis3_dev.idev->input; + input_set_capability(input_dev, EV_KEY, BTN_X); + input_set_capability(input_dev, EV_KEY, BTN_Y); + input_set_capability(input_dev, EV_KEY, BTN_Z); + } + } + + if (p->wakeup_flags) { + dev->write(dev, FF_WU_CFG_1, p->wakeup_flags); + dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f); + /* pdata value + 1 to keep this backward compatible*/ + dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1); + ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/ + } + + if (p->wakeup_flags2) { + dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2); + dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f); + /* pdata value + 1 to keep this backward compatible*/ + dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1); + ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/ + } + /* Configure hipass filters */ + dev->write(dev, CTRL_REG2, ctrl2); + + if (p->irq2) { + err = request_threaded_irq(p->irq2, + NULL, + lis302dl_interrupt_thread2_8b, + IRQF_TRIGGER_RISING | IRQF_ONESHOT | + (p->irq_flags2 & IRQF_TRIGGER_MASK), + DRIVER_NAME, &lis3_dev); + if (err < 0) + pr_err("No second IRQ. Limited functionality\n"); + } +} + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independent of the bus system. + */ +int lis3lv02d_init_device(struct lis3lv02d *dev) +{ + int err; + irq_handler_t thread_fn; + int irq_flags = 0; + + dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I); + + switch (dev->whoami) { + case WAI_12B: + pr_info("12 bits sensor found\n"); + dev->read_data = lis3lv02d_read_12; + dev->mdps_max_val = 2048; + dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B; + dev->odrs = lis3_12_rates; + dev->odr_mask = CTRL1_DF0 | CTRL1_DF1; + dev->scale = LIS3_SENSITIVITY_12B; + dev->regs = lis3_wai12_regs; + dev->regs_size = ARRAY_SIZE(lis3_wai12_regs); + break; + case WAI_8B: + pr_info("8 bits sensor found\n"); + dev->read_data = lis3lv02d_read_8; + dev->mdps_max_val = 128; + dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; + dev->odrs = lis3_8_rates; + dev->odr_mask = CTRL1_DR; + dev->scale = LIS3_SENSITIVITY_8B; + dev->regs = lis3_wai8_regs; + dev->regs_size = ARRAY_SIZE(lis3_wai8_regs); + break; + case WAI_3DC: + pr_info("8 bits 3DC sensor found\n"); + dev->read_data = lis3lv02d_read_8; + dev->mdps_max_val = 128; + dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; + dev->odrs = lis3_3dc_rates; + dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3; + dev->scale = LIS3_SENSITIVITY_8B; + break; + default: + pr_err("unknown sensor type 0x%X\n", dev->whoami); + return -EINVAL; + } + + dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs), + sizeof(lis3_wai12_regs)), GFP_KERNEL); + + if (dev->reg_cache == NULL) { + printk(KERN_ERR DRIVER_NAME "out of memory\n"); + return -ENOMEM; + } + + mutex_init(&dev->mutex); + atomic_set(&dev->wake_thread, 0); + + lis3lv02d_add_fs(dev); + lis3lv02d_poweron(dev); + + if (dev->pm_dev) { + pm_runtime_set_active(dev->pm_dev); + pm_runtime_enable(dev->pm_dev); + } + + if (lis3lv02d_joystick_enable()) + pr_err("joystick initialization failed\n"); + + /* passing in platform specific data is purely optional and only + * used by the SPI transport layer at the moment */ + if (dev->pdata) { + struct lis3lv02d_platform_data *p = dev->pdata; + + if (dev->whoami == WAI_8B) + lis3lv02d_8b_configure(dev, p); + + irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK; + + dev->irq_cfg = p->irq_cfg; + if (p->irq_cfg) + dev->write(dev, CTRL_REG3, p->irq_cfg); + + if (p->default_rate) + lis3lv02d_set_odr(p->default_rate); + } + + /* bail if we did not get an IRQ from the bus layer */ + if (!dev->irq) { + pr_debug("No IRQ. Disabling /dev/freefall\n"); + goto out; + } + + /* + * The sensor can generate interrupts for free-fall and direction + * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep + * the things simple and _fast_ we activate it only for free-fall, so + * no need to read register (very slow with ACPI). For the same reason, + * we forbid shared interrupts. + * + * IRQF_TRIGGER_RISING seems pointless on HP laptops because the + * io-apic is not configurable (and generates a warning) but I keep it + * in case of support for other hardware. + */ + if (dev->pdata && dev->whoami == WAI_8B) + thread_fn = lis302dl_interrupt_thread1_8b; + else + thread_fn = NULL; + + err = request_threaded_irq(dev->irq, lis302dl_interrupt, + thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT | + irq_flags, + DRIVER_NAME, &lis3_dev); + + if (err < 0) { + pr_err("Cannot get IRQ\n"); + goto out; + } + + if (misc_register(&lis3lv02d_misc_device)) + pr_err("misc_register failed\n"); +out: + return 0; +} +EXPORT_SYMBOL_GPL(lis3lv02d_init_device); + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h new file mode 100644 index 000000000000..a1939589eb2c --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d.h @@ -0,0 +1,291 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008-2009 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include + +/* + * This driver tries to support the "digital" accelerometer chips from + * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL, + * LIS35DE, or LIS202DL. They are very similar in terms of programming, with + * almost the same registers. In addition to differing on physical properties, + * they differ on the number of axes (2/3), precision (8/12 bits), and special + * features (freefall detection, click...). Unfortunately, not all the + * differences can be probed via a register. + * They can be connected either via I²C or SPI. + */ + +#include + +enum lis3_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + CTRL_REG4 = 0x23, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTX = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTY = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + OUTZ = 0x2D, +}; + +enum lis302d_reg { + FF_WU_CFG_1 = 0x30, + FF_WU_SRC_1 = 0x31, + FF_WU_THS_1 = 0x32, + FF_WU_DURATION_1 = 0x33, + FF_WU_CFG_2 = 0x34, + FF_WU_SRC_2 = 0x35, + FF_WU_THS_2 = 0x36, + FF_WU_DURATION_2 = 0x37, + CLICK_CFG = 0x38, + CLICK_SRC = 0x39, + CLICK_THSY_X = 0x3B, + CLICK_THSZ = 0x3C, + CLICK_TIMELIMIT = 0x3D, + CLICK_LATENCY = 0x3E, + CLICK_WINDOW = 0x3F, +}; + +enum lis3lv02d_reg { + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3_who_am_i { + WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */ + WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */ + WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */ + WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */ +}; + +enum lis3lv02d_ctrl1_12b { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; + +/* Delta to ctrl1_12b version */ +enum lis3lv02d_ctrl1_8b { + CTRL1_STM = 0x08, + CTRL1_STP = 0x10, + CTRL1_FS = 0x20, + CTRL1_PD = 0x40, + CTRL1_DR = 0x80, +}; + +enum lis3lv02d_ctrl1_3dc { + CTRL1_ODR0 = 0x10, + CTRL1_ODR1 = 0x20, + CTRL1_ODR2 = 0x40, + CTRL1_ODR3 = 0x80, +}; + +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + +enum lis3lv02d_ctrl4_3dc { + CTRL4_SIM = 0x01, + CTRL4_ST0 = 0x02, + CTRL4_ST1 = 0x04, + CTRL4_FS0 = 0x10, + CTRL4_FS1 = 0x20, +}; + +enum lis302d_ctrl2 { + HP_FF_WU2 = 0x08, + HP_FF_WU1 = 0x04, + CTRL2_BOOT_8B = 0x40, +}; + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + +enum lis3lv02d_click_src_8b { + CLICK_SINGLE_X = 0x01, + CLICK_DOUBLE_X = 0x02, + CLICK_SINGLE_Y = 0x04, + CLICK_DOUBLE_Y = 0x08, + CLICK_SINGLE_Z = 0x10, + CLICK_DOUBLE_Z = 0x20, + CLICK_IA = 0x40, +}; + +enum lis3lv02d_reg_state { + LIS3_REG_OFF = 0x00, + LIS3_REG_ON = 0x01, +}; + +union axis_conversion { + struct { + int x, y, z; + }; + int as_array[3]; + +}; + +struct lis3lv02d { + void *bus_priv; /* used by the bus layer only */ + struct device *pm_dev; /* for pm_runtime purposes */ + int (*init) (struct lis3lv02d *lis3); + int (*write) (struct lis3lv02d *lis3, int reg, u8 val); + int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret); + int (*blkread) (struct lis3lv02d *lis3, int reg, int len, u8 *ret); + int (*reg_ctrl) (struct lis3lv02d *lis3, bool state); + + int *odrs; /* Supported output data rates */ + u8 *regs; /* Regs to store / restore */ + int regs_size; + u8 *reg_cache; + bool regs_stored; + u8 odr_mask; /* ODR bit mask */ + u8 whoami; /* indicates measurement precision */ + s16 (*read_data) (struct lis3lv02d *lis3, int reg); + int mdps_max_val; + int pwron_delay; + int scale; /* + * relationship between 1 LBS and mG + * (1/1000th of earth gravity) + */ + + struct input_polled_dev *idev; /* input device */ + struct platform_device *pdev; /* platform device */ + struct regulator_bulk_data regulators[2]; + atomic_t count; /* interrupt count after last read */ + union axis_conversion ac; /* hw -> logical axis */ + int mapped_btns[3]; + + u32 irq; /* IRQ number */ + struct fasync_struct *async_queue; /* queue for the misc device */ + wait_queue_head_t misc_wait; /* Wait queue for the misc device */ + unsigned long misc_opened; /* bit0: whether the device is open */ + int data_ready_count[2]; + atomic_t wake_thread; + unsigned char irq_cfg; + + struct lis3lv02d_platform_data *pdata; /* for passing board config */ + struct mutex mutex; /* Serialize poll and selftest */ +}; + +int lis3lv02d_init_device(struct lis3lv02d *lis3); +int lis3lv02d_joystick_enable(void); +void lis3lv02d_joystick_disable(void); +void lis3lv02d_poweroff(struct lis3lv02d *lis3); +void lis3lv02d_poweron(struct lis3lv02d *lis3); +int lis3lv02d_remove_fs(struct lis3lv02d *lis3); + +extern struct lis3lv02d lis3_dev; diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c new file mode 100644 index 000000000000..b20dfb4522d2 --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c @@ -0,0 +1,279 @@ +/* + * drivers/hwmon/lis3lv02d_i2c.c + * + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. + * Driver is based on corresponding SPI driver written by Daniel Mack + * (lis3lv02d_spi.c (C) 2009 Daniel Mack ). + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_i2c" + +static const char reg_vdd[] = "Vdd"; +static const char reg_vdd_io[] = "Vdd_IO"; + +static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state) +{ + int ret; + if (state == LIS3_REG_OFF) { + ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators), + lis3->regulators); + } else { + ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators), + lis3->regulators); + /* Chip needs time to wakeup. Not mentioned in datasheet */ + usleep_range(10000, 20000); + } + return ret; +} + +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) +{ + struct i2c_client *c = lis3->bus_priv; + return i2c_smbus_write_byte_data(c, reg, value); +} + +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + *v = i2c_smbus_read_byte_data(c, reg); + return 0; +} + +static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len, + u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + reg |= (1 << 7); /* 7th bit enables address auto incrementation */ + return i2c_smbus_read_i2c_block_data(c, reg, len, v); +} + +static int lis3_i2c_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + if (lis3->reg_ctrl) + lis3_reg_ctrl(lis3, LIS3_REG_ON); + + lis3->read(lis3, WHO_AM_I, ®); + if (reg != lis3->whoami) + printk(KERN_ERR "lis3: power on failure\n"); + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; + return lis3->write(lis3, CTRL_REG1, reg); +} + +/* Default axis mapping but it can be overwritten by platform data */ +static union axis_conversion lis3lv02d_axis_map = + { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } }; + +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata) { + /* Regulator control is optional */ + if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL) + lis3_dev.reg_ctrl = lis3_reg_ctrl; + + if ((pdata->driver_features & LIS3_USE_BLOCK_READ) && + (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK))) + lis3_dev.blkread = lis3_i2c_blockread; + + if (pdata->axis_x) + lis3lv02d_axis_map.x = pdata->axis_x; + + if (pdata->axis_y) + lis3lv02d_axis_map.y = pdata->axis_y; + + if (pdata->axis_z) + lis3lv02d_axis_map.z = pdata->axis_z; + + if (pdata->setup_resources) + ret = pdata->setup_resources(); + + if (ret) + goto fail; + } + + if (lis3_dev.reg_ctrl) { + lis3_dev.regulators[0].supply = reg_vdd; + lis3_dev.regulators[1].supply = reg_vdd_io; + ret = regulator_bulk_get(&client->dev, + ARRAY_SIZE(lis3_dev.regulators), + lis3_dev.regulators); + if (ret < 0) + goto fail; + } + + lis3_dev.pdata = pdata; + lis3_dev.bus_priv = client; + lis3_dev.init = lis3_i2c_init; + lis3_dev.read = lis3_i2c_read; + lis3_dev.write = lis3_i2c_write; + lis3_dev.irq = client->irq; + lis3_dev.ac = lis3lv02d_axis_map; + lis3_dev.pm_dev = &client->dev; + + i2c_set_clientdata(client, &lis3_dev); + + /* Provide power over the init call */ + if (lis3_dev.reg_ctrl) + lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON); + + ret = lis3lv02d_init_device(&lis3_dev); + + if (lis3_dev.reg_ctrl) + lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF); + + if (ret == 0) + return 0; +fail: + if (pdata && pdata->release_resources) + pdata->release_resources(); + return ret; +} + +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata && pdata->release_resources) + pdata->release_resources(); + + lis3lv02d_joystick_disable(); + lis3lv02d_remove_fs(&lis3_dev); + + if (lis3_dev.reg_ctrl) + regulator_bulk_free(ARRAY_SIZE(lis3->regulators), + lis3_dev.regulators); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int lis3lv02d_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata || !lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3lv02d_i2c_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + /* + * pm_runtime documentation says that devices should always + * be powered on at resume. Pm_runtime turns them off after system + * wide resume is complete. + */ + if (!lis3->pdata || !lis3->pdata->wakeup_flags || + pm_runtime_suspended(dev)) + lis3lv02d_poweron(lis3); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int lis3_i2c_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3_i2c_runtime_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + lis3lv02d_poweron(lis3); + return 0; +} +#endif /* CONFIG_PM_RUNTIME */ + +static const struct i2c_device_id lis3lv02d_id[] = { + {"lis3lv02d", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); + +static const struct dev_pm_ops lis3_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend, + lis3lv02d_i2c_resume) + SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend, + lis3_i2c_runtime_resume, + NULL) +}; + +static struct i2c_driver lis3lv02d_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = &lis3_pm_ops, + }, + .probe = lis3lv02d_i2c_probe, + .remove = __devexit_p(lis3lv02d_i2c_remove), + .id_table = lis3lv02d_id, +}; + +static int __init lis3lv02d_init(void) +{ + return i2c_add_driver(&lis3lv02d_i2c_driver); +} + +static void __exit lis3lv02d_exit(void) +{ + i2c_del_driver(&lis3lv02d_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("lis3lv02d I2C interface"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init); +module_exit(lis3lv02d_exit); diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c new file mode 100644 index 000000000000..c1f8a8fbf694 --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c @@ -0,0 +1,145 @@ +/* + * lis3lv02d_spi - SPI glue layer for lis3lv02d + * + * Copyright (c) 2009 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_spi" +#define LIS3_SPI_READ 0x80 + +static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct spi_device *spi = lis3->bus_priv; + int ret = spi_w8r8(spi, reg | LIS3_SPI_READ); + if (ret < 0) + return -EINVAL; + + *v = (u8) ret; + return 0; +} + +static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val) +{ + u8 tmp[2] = { reg, val }; + struct spi_device *spi = lis3->bus_priv; + return spi_write(spi, tmp, sizeof(tmp)); +} + +static int lis3_spi_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; + return lis3->write(lis3, CTRL_REG1, reg); +} + +static union axis_conversion lis3lv02d_axis_normal = + { .as_array = { 1, 2, 3 } }; + +static int __devinit lis302dl_spi_probe(struct spi_device *spi) +{ + int ret; + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + lis3_dev.bus_priv = spi; + lis3_dev.init = lis3_spi_init; + lis3_dev.read = lis3_spi_read; + lis3_dev.write = lis3_spi_write; + lis3_dev.irq = spi->irq; + lis3_dev.ac = lis3lv02d_axis_normal; + lis3_dev.pdata = spi->dev.platform_data; + spi_set_drvdata(spi, &lis3_dev); + + return lis3lv02d_init_device(&lis3_dev); +} + +static int __devexit lis302dl_spi_remove(struct spi_device *spi) +{ + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM_SLEEP +static int lis3lv02d_spi_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + + if (!lis3->pdata || !lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(&lis3_dev); + + return 0; +} + +static int lis3lv02d_spi_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + + if (!lis3->pdata || !lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend, + lis3lv02d_spi_resume); + +static struct spi_driver lis302dl_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = &lis3lv02d_spi_pm, + }, + .probe = lis302dl_spi_probe, + .remove = __devexit_p(lis302dl_spi_remove), +}; + +static int __init lis302dl_init(void) +{ + return spi_register_driver(&lis302dl_spi_driver); +} + +static void __exit lis302dl_exit(void) +{ + spi_unregister_driver(&lis302dl_spi_driver); +} + +module_init(lis302dl_init); +module_exit(lis302dl_exit); + +MODULE_AUTHOR("Daniel Mack "); +MODULE_DESCRIPTION("lis3lv02d SPI glue layer"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:" DRV_NAME); diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 23f09c1b234b..0a52711a6362 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -37,7 +37,7 @@ #include #include #include -#include "../../hwmon/lis3lv02d.h" +#include "../../misc/lis3lv02d/lis3lv02d.h" #define DRIVER_NAME "lis3lv02d" #define ACPI_MDPS_CLASS "accelerometer"