2013-03-18 |
gwl | add broadcom AP series wifi |
tree | commitdiff |
2013-03-18 |
hjc | rk2928b: defconfig delete sdmmc gpio |
tree | commitdiff |
2013-03-18 |
hjc | rk3168_86v: 2in1 IO |
tree | commitdiff |
2013-03-18 |
hjc | rk3168_86v: add support lcd auo A080SN03 |
tree | commitdiff |
2013-03-18 |
hjc | rk3168_86v: add support codec es8323,tp goodix_82x |
tree | commitdiff |
2013-03-18 |
hjc | rk2928b: lcd wifi codec hdmi and defconfig |
tree | commitdiff |
2013-03-15 |
wuhao | rk3188 ds1006h: add hardware V1.2 support |
tree | commitdiff |
2013-03-14 |
张晴 | tps65910:set dcdc time step 12.5mv/us |
tree | commitdiff |
2013-03-14 |
wbx | rk 3188: fix board-rk3168-tb.c for sensor |
tree | commitdiff |
2013-03-14 |
lyz | usb : USB20_OTG support both host & device mode in... |
tree | commitdiff |
2013-03-14 |
lyz | Rk2928 : use uart2 as default uart debug port instead... |
tree | commitdiff |
2013-03-13 |
yxj | board LR097:modify gesnsor orientation to support new... |
tree | commitdiff |
2013-03-13 |
chenxing | rk3066: make sure gpll config(nr = 1, nf = 25, no ... |
tree | commitdiff |
2013-03-13 |
kfx | update rk3066_openwrt_defconfig |
tree | commitdiff |
2013-03-13 |
wbx | rk3066 : fix board-rk30-ds975.c board-rk30-sdk.c for... |
tree | commitdiff |
2013-03-13 |
wuhao | rk3188 ds1006h: pwm is set to 30k |
tree | commitdiff |
2013-03-13 |
wuhao | rk3188 ds1006h: modify freq volt table |
tree | commitdiff |
2013-03-12 |
wuhao | rk3188 ds1006h: configuration the akm8963 based sensors... |
tree | commitdiff |
2013-03-12 |
邱建斌 | rt5631 phone : add rt5631 phone/phonepad board info |
tree | commitdiff |
2013-03-12 |
hjc | rk3168_86v: fix gsensor direction mma7660 |
tree | commitdiff |
2013-03-12 |
hjc | rk3168_86v: compatible with wm831x and act8846; set... |
tree | commitdiff |
2013-03-11 |
hjc | rk3168_86v: modify shutdown error |
tree | commitdiff |
2013-03-11 |
kfx | download kernel source code from 10.10.10.29 |
tree | commitdiff |
2013-03-11 |
wbx | rk3066: add rk3066_sdk_defconfig and rk30_ds975_defconf... |
tree | commitdiff |
2013-03-11 |
许盛飞 | adc-battery: for lower-power warning |
tree | commitdiff |
2013-03-09 |
luowei | sensors:add akm8963 support,need update HAL |
tree | commitdiff |
2013-03-08 |
xxx | add clk disable by dvfs |
tree | commitdiff |
2013-03-08 |
wbx | rk3066: fix board-rk30-ds975.c for rk_cif_power |
tree | commitdiff |
2013-03-08 |
wbx | rk3066: fix board-rk30-ds975.c for screen blink |
tree | commitdiff |
2013-03-08 |
wbx | rk3066: add board-rk30-ds975.c for /sys/module/board... |
tree | commitdiff |
2013-03-08 |
hjc | rk2928b: add board file and defconfig |
tree | commitdiff |
2013-03-08 |
Cody Xie | rk3188 : add board path for /sys/module/board/parameters/ |
tree | commitdiff |
2013-03-07 |
蓝斌元 | z600t board add ct36x tp support |
tree | commitdiff |
2013-03-07 |
xxx | add freq volt table selects for productions |
tree | commitdiff |
2013-03-07 |
黄涛 | rk: cpu.h: add soc_is_rk2928b |
tree | commitdiff |
2013-03-07 |
黄涛 | rk: Kconfig add RK2928B support |
tree | commitdiff |
2013-03-07 |
黄涛 | rk30: Makefile: fix board.o define |
tree | commitdiff |
2013-03-07 |
hjc | rk3168_86v: set min brightness |
tree | commitdiff |
2013-03-07 |
cym | RK3168 DDR:support DDR change frequency for RK3168 |
tree | commitdiff |
2013-03-07 |
蓝斌元 | Merge branch 'develop-3.0' of ssh://10.10.10.29/rk... |
tree | commitdiff |
2013-03-07 |
蓝斌元 | add board path for /sys/module/board/parameters/ |
tree | commitdiff |
2013-03-06 |
蓝斌元 | Merge branch 'develop-3.0' of ssh://10.10.10.29/rk... |
tree | commitdiff |
2013-03-06 |
蓝斌元 | rk3066 add phone pad modem support |
tree | commitdiff |
2013-03-06 |
hjc | rk3168_86v: new hardware for lcd_cs pin |
tree | commitdiff |
2013-03-05 |
wuhao | rk3188 ds1006h: wakeup system by OTG BVALID interrupt... |
tree | commitdiff |
2013-03-05 |
chenxing | rk3168/rk3066b: force dclk_lcdc0/1 even div |
tree | commitdiff |
2013-03-05 |
chm | vpu_service: reset decoder when buffer empty |
tree | commitdiff |
2013-03-05 |
chenxing | rk3188: force dclk_lcdc0/1 even div |
tree | commitdiff |
2013-03-05 |
hjc | rk3168m: defconfig codec rk610 |
tree | commitdiff |
2013-03-05 |
wlf | RK3188 USB: disable usb bypass uart function in standby... |
tree | commitdiff |
2013-03-05 |
黄涛 | rk3168/rk3188: board enable CONFIG_UHID in defconfig |
tree | commitdiff |
2013-03-05 |
黄涛 | rk3188: grf add io power domain voltage api |
tree | commitdiff |
2013-03-05 |
黄涛 | rk3066b: grf add io power domain voltage api |
tree | commitdiff |
2013-03-05 |
yxj | LR097:compatile with gsensor lis3dh |
tree | commitdiff |
2013-03-04 |
Cody Xie | rk3188 : modify to support dedicated memory reserved... |
tree | commitdiff |
2013-03-04 |
CMY | add CONFIG_UHID for bluetooth hid devices |
tree | commitdiff |
2013-03-04 |
wbx | modify rk30_ds975_defconfig for HDMI and USB hub |
tree | commitdiff |
2013-03-01 |
wuhao | rk3188 ds1006h: add cw2015 |
tree | commitdiff |
2013-03-01 |
黄涛 | rk: dvfs: fix wrong mutex_unlock on dvfs_get_vd_regulat... |
tree | commitdiff |
2013-02-28 |
xbw | MT6620 |
tree | commitdiff |
2013-02-28 |
hjc | rk3168m: add rk3168m defconfig |
tree | commitdiff |
2013-02-28 |
hjc | rk3168_86v: add defconfig for rk3168+codec |
tree | commitdiff |
2013-02-28 |
黄涛 | rk3168: tb: update defconfig by savedefconfig |
tree | commitdiff |
2013-02-28 |
黄涛 | rk3188: tb: update defconfig by savedefconfig |
tree | commitdiff |
2013-02-28 |
黄涛 | rk: disable preempt_disable when power off |
tree | commitdiff |
2013-02-27 |
hjc | rk3168_86v: close pwm regulator for 86v new board |
tree | commitdiff |
2013-02-27 |
张晴 | rk3168:set defult voltage for new 86v hardware |
tree | commitdiff |
2013-02-26 |
黄涛 | rk3188: set l2c data latency 231 |
tree | commitdiff |
2013-02-26 |
黄涛 | rk3188: fix cpu up down bug |
tree | commitdiff |
2013-02-26 |
Cody Xie | rk3188 lr097 : fix ct36x bug on lr097 |
tree | commitdiff |
2013-02-26 |
hjc | Merge ssh://10.10.10.29/rk/kernel into develop-3.0 |
tree | commitdiff |
2013-02-26 |
hjc | rk3168_86v: when ddr=300M,the logic voltage=1000mv... |
tree | commitdiff |
2013-02-26 |
hjc | rk3168_86v: when ddr=300M,the logic voltage=1000mv... |
tree | commitdiff |
2013-02-26 |
wuhao | fix touch ct363 |
tree | commitdiff |
2013-02-25 |
hjc | rk3168_86v: delete arm:1.4G and 1.6G; gpu:600M |
tree | commitdiff |
2013-02-25 |
hjc | rk3168_86v: add rk3168_86v_old,the arm is connected... |
tree | commitdiff |
2013-02-25 |
Cody Xie | rk3188 ds1006h: do not use logo from customer, the... |
tree | commitdiff |
2013-02-25 |
hjc | rk3168_86v: deconfig set ddr 324M,support charge display |
tree | commitdiff |
2013-02-25 |
hjc | rk3168_86v: update dvfs_gpu_table |
tree | commitdiff |
2013-02-25 |
hjc | rk3168m: use a useless gpio to instead of PMU_EN; set... |
tree | commitdiff |
2013-02-25 |
hjc | rk3168m: To backup defconfig |
tree | commitdiff |
2013-02-25 |
hjc | rk3168m: add board-rk3168m-tb.c |
tree | commitdiff |
2013-02-25 |
hjc | rk3168_86v: add maxbrightness restriction |
tree | commitdiff |
2013-02-23 |
黄涛 | Merge remote-tracking branch 'stable/linux-3.0.y' into... |
tree | commitdiff |
2013-02-23 |
黄涛 | rk3066b: use rk3188 cpufreq driver |
tree | commitdiff |
2013-02-23 |
黄涛 | rk3188: cpufreq: version 2.0 |
tree | commitdiff |
2013-02-23 |
xxx | dvfs gets volt chngeing time for regulator |
tree | commitdiff |
2013-02-22 |
黄涛 | rk: enable synchronization framework, for support andro... |
tree | commitdiff |
2013-02-22 |
hjc | rk3168_86v: xbw:delete SDCARD_DET_FROM_GPIO |
tree | commitdiff |
2013-02-22 |
hjc | rk3168_86v: xbw SDMMC IO voltage |
tree | commitdiff |
2013-02-22 |
wuhao | rk3188 ds1006h: sync logo |
tree | commitdiff |
2013-02-22 |
黄涛 | rk: Kconfig add RK3168M support, add SOC_RK3168M config... |
tree | commitdiff |
2013-02-22 |
hjc | rk3168_86v: increase the arm and logic voltage |
tree | commitdiff |
2013-02-22 |
chenxing | rk3168: dvfs support voltage diff = 0 |
tree | commitdiff |
2013-02-22 |
wuhao | rk3188 ds1006h : sync board-rk3188-ds1006h-sdmmc-config.c |
tree | commitdiff |
2013-02-22 |
xbw | MT6620 wifi: add the support for MT6620 wifi in RK31XX... |
tree | commitdiff |
2013-02-22 |
xbw | MT6620 wifi: mt6620 use 2.8v power. |
tree | commitdiff |
2013-02-22 |
xbw | SDMMC IO voltage: |
tree | commitdiff |
2013-02-21 |
xbw | SDMMC: |
tree | commitdiff |
2013-02-21 |
xbw | SDMMC: |
tree | commitdiff |
next |