bcm53xx: backport DT patches for serial, thermal and MDIO
[lede.git] / target / linux / at91 /
2017-01-09 Felix Fietkaukernel: remove ubifs xz decompression support
2016-10-06 Ben Whittenat91: Remove u-boot from platform images folder
2016-09-15 Tim Harveykernel: clean up usb gadget support
2016-04-25 Jo-Philipp Wichat91: fix SAMA5D3 subtarget
2016-02-16 John Crispinat91: udc driver was missing deps
2016-01-25 Felix Fietkaubase-files: remove default /etc/config/network, generat...
2016-01-19 John Crispinat91: drop v3.18
2016-01-19 John Crispinat91: move to 4.4 kernel
2016-01-19 John Crispinat91: fix typo in usb kernel module makefile
2016-01-19 John Crispinat91: remove SAMA5D3 from Default image build.
2016-01-19 John Crispinat91: add package for high speed usb device
2016-01-19 John Crispinat91: add 4.4 support
2015-12-11 Jo-Philipp Wichall: drop old uci-defaults.sh
2015-12-04 Jo-Philipp Wichall: remove redundant board.d/00_model files
2015-12-03 Jo-Philipp Wichat91: switch from uci-defaults to board.d
2015-08-17 John Crispinat91: fix usb rate backport patch tab mangle
2015-08-17 John Crispinat91: Backport determine_rate prototype fix
2015-07-04 Florian Fainelliat91: add Device Tree based board detection
2015-07-04 Florian Fainelliat91: sama5d3: enable USB2 by default
2015-07-04 Florian Fainelliat91: enable Micrel PHY driver
2015-05-28 Jo-Philipp Wichat91: fix imagebuilder
2015-05-21 Jonas Gorskikernel: update 3.18 to 3.18.14
2015-03-06 John Crispinkernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
2015-03-06 John Crispinkernel: disbale HAMRADIO in generic config
2015-03-05 John Crispinat91: add SAMA5D3-Xplained board UBI parameters to...
2015-02-19 John Crispinat91: Add dts for Exegin Q5x boards.
2015-02-19 John Crispinat91: USB gadget subsystem cleanup and driver fix.
2015-02-19 John Crispinat91: Enable power and reset controller drivers.
2015-02-18 John Crispinat91: bump to v3.18
2014-12-13 Felix Fietkauat91: remove linux 3.10 support
2014-10-24 Felix Fietkaukernel: makefiles: make use of new var KERNEL_PATCHVER
2014-10-13 John Crispinat91: fix at91-adc dependencies
2014-10-06 John Crispinat91: remove support for TQMa9263
2014-09-13 Hauke Mehrtenskernel: do not deactivate CONFIG_BLK_DEV
2014-09-10 Luka Perkovkernel: update 3.14 to 3.14.18
2014-09-03 Florian Fainelliat91: build images for AT91SAMA5D3XPLAINED
2014-09-03 Florian Fainelliat91: add SAMA5D3 subtarget
2014-09-03 Florian Fainelliat91: move legacy Kconfig options to subtarget
2014-09-03 Florian Fainelliat91: switch to 3.14
2014-09-03 Florian Fainelliat91: add 3.14 support
2014-09-03 Florian Fainelliat91: move 3.10 specific files and patches
2014-09-03 Florian Fainelliat91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
2014-09-03 Florian Fainelliat91: fix typo on Calao
2014-09-03 Florian Fainelliat91: create a legacy subtarget
2014-07-21 John Crispintarget/linux/*/image/Makefile: use new dts path variable
2014-07-20 John Crispinkernel: update to 3.10.49 Signed-off-by: John Crispin...
2014-07-13 Gabor Juhoskernel: sort Kconfig options in kernel configs
2014-06-26 John Crispinkernel: update 3.10.36->3.10.44
2014-06-11 John Crispinkernel: make sure the new UBIBLOCK symbol does not...
2014-05-08 Hauke Mehrtenskernel: modify mtd related patches for 3.14
2014-04-29 Hauke Mehrtensat91: Add AT91 board and model name to /tmp/sysinfo
2014-04-29 Hauke Mehrtensat91: AT91SAM9G20-EK fixes
2014-04-29 Hauke MehrtensUpdate AT91 kernel to 3.10.34
2013-11-17 Hauke Mehrtensat91: fix typo in network file
2013-10-01 Hauke Mehrtensat91: fix missing drivers/iio/adc/at91-adc.ko in kmod...
2013-09-26 Felix Fietkaubuild: unify arm target cflags
2013-07-29 Felix Fietkaubuild: unify target independent optimization options
2013-06-05 Jonas Gorskitarget: don't build jffs2 nor images by default
2013-05-26 Gabor Juhoskernel: update linux 3.8 to 3.8.13
2013-05-08 Gabor Juhoskernel: update linux 3.8 to 3.8.12
2013-05-03 Gabor Juhosat91: build .dtb file for the CalAmp LMU500 board
2013-05-01 Gabor Juhoskernel: update linux 3.8 to 3.8.11
2013-04-30 Gabor Juhoskernel: update linux 3.8 to 3.8.10
2013-04-30 Gabor Juhosat91: add missing config symbols
2013-04-26 Gabor Juhoskernel: update linux 3.8 to 3.8.9
2013-04-26 Gabor Juhosat91: upgrade to kernel 3.8.7 and use devicetree
2013-04-17 Felix Fietkaubuild: consistently use 'depends on' instead of 'depends'
2013-01-14 Florian Fainellitarget: enable XZ BCJ decompressor code after r35097
2012-10-29 Gabor Juhostarget: refresh all target configs with kconfig.pl
2012-10-11 John Crispingpiodev/gpioctl RIP
2012-09-28 John Crispindont explicitly select wireless-tools. rely on the...
2012-07-29 Florian Fainellimove i2c module to target modules.mk
2012-07-28 John Crispinclean up pwm patches and drivers
2012-06-05 John Crispinbump to 3.3.8
2012-05-23 Gabor Juhoskernel: update linux 3.3 to 3.3.7
2012-05-15 Gabor Juhoslinux: move certain disabled symbols to the generic...
2012-05-14 Gabor Juhoskernel: update linux 3.3 to 3.3.6
2012-05-07 Gabor Juhoskernel: update linux 3.3 to 3.3.5
2012-04-30 Gabor Juhoskernel: update linux 3.3 to 3.3.4
2012-04-24 Jonas Gorskikernel: update linux 3.3 to 3.3.3
2012-04-22 Claudio Mignantiflexibity: Cleanup the subtarget config
2012-04-22 Claudio Mignantitqma9263: update board definition for 3.x series and...
2012-04-22 Claudio MignantiRemove old netus board definition
2012-04-20 Claudio MignantiReorganize the subtargets, group subtargets per cpu...
2012-04-20 Claudio MignantiUpdate the kernel to 3.3.x series, remove patches that...
2012-04-20 Claudio MignantiEnsure that the bin directory exists before copy the...
2012-04-15 Hauke Mehrtensat91: Missing kernel config symbols for AT91 target...
2011-11-25 Nicolas Thilltargets: fix CONFIG_USB_STORAGE_* inconsistency
2011-11-10 Jo-Philipp Wichbase-files, target: assign name to system timeserver...
2011-11-04 Jo-Philipp Wichadd timeserver config to target specific system configs...
2011-07-03 John CrispinAT91: flexibity: add system uci file
2011-07-03 John CrispinAT91: Add flexibity board support
2011-06-18 Hauke Mehrtenskernel: update to kernel 2.6.38.8
2011-05-15 Hauke Mehrtenskernel: update kernel from 2.6.38.2 to 2.6.38.6 and...
2011-04-09 Hauke Mehrtensat91: add some missing config options
2011-03-28 Michael BüschUpdate 2.6.38 to 2.6.38.2
2011-03-26 Felix Fietkauglobal cflags: remove -funit-at-a-time, it is ignored...
2011-03-20 Claudio MignantiUpdate to 2.6.38
2011-03-07 Imre Kalozonly support EABI on ARM targets
2011-02-19 Florian Fainelliupdate to 2.6.35.11
next