luowei [Thu, 16 Sep 2010 03:32:43 +0000 (11:32 +0800)]
add falling and rising edge support for fpga's gpio interrupt,add support that fpga's gpio interrupt wake system while system is suspending
宋秀杰 [Wed, 15 Sep 2010 13:42:12 +0000 (06:42 -0700)]
modify pm.c, make resume stable, default close control
lbt [Wed, 15 Sep 2010 09:33:41 +0000 (17:33 +0800)]
bsp:modify wifi and bt gpio control for the infoit50 board
宋秀杰 [Tue, 14 Sep 2010 14:20:07 +0000 (07:20 -0700)]
flash pm.c, default close it control
swj [Tue, 14 Sep 2010 10:23:01 +0000 (03:23 -0700)]
modified gsensor for it50
宋秀杰 [Tue, 14 Sep 2010 09:12:33 +0000 (02:12 -0700)]
add rk2818_pm.h
lhh [Tue, 14 Sep 2010 08:53:17 +0000 (16:53 +0800)]
it50 key charge
宋秀杰 [Tue, 14 Sep 2010 08:34:23 +0000 (01:34 -0700)]
add raho pm control, add LCDC resume
宋秀杰 [Wed, 8 Sep 2010 13:53:28 +0000 (06:53 -0700)]
update rk2818_info_defconfig for expand gpio
srt [Tue, 14 Sep 2010 07:10:31 +0000 (15:10 +0800)]
auto TS Calibration: auto switch support between info_sdk and it50
srt [Tue, 14 Sep 2010 02:58:17 +0000 (10:58 +0800)]
add Auto set TS calibration Function
srt [Tue, 14 Sep 2010 02:17:18 +0000 (10:17 +0800)]
add Auto set TS calibration Function
swj [Tue, 14 Sep 2010 01:52:04 +0000 (18:52 -0700)]
modified touchscreen driver for it50
swj [Mon, 13 Sep 2010 09:34:10 +0000 (02:34 -0700)]
change jogball for it50
Rich.jiangyk [Mon, 13 Sep 2010 09:16:27 +0000 (17:16 +0800)]
fix ov9650 init_array to solve mirrored images
ov9650 register 0x1e controls mirro/vflip functions. modify settings to correct mirrored image problems.
swj [Mon, 13 Sep 2010 09:09:34 +0000 (02:09 -0700)]
Merge branch 'develop' of 10.10.10.201:/home/rockchip/rk2818/kernel into develop
swj [Mon, 13 Sep 2010 09:07:35 +0000 (02:07 -0700)]
jogball
Rich.jiangyk [Mon, 13 Sep 2010 08:51:28 +0000 (16:51 +0800)]
fix ov9650 init_data bug
in sensor_init_data array, register 0x00 was set to 0x00, which cause the initialization unfinished.
This setting is useless, so remove it! ov9650 is working better at vga dc/dv now.
lyx [Mon, 13 Sep 2010 07:48:12 +0000 (00:48 -0700)]
spi: set spi chipselect gpios HIGH in io_init function for infosdk
lyx [Mon, 13 Sep 2010 07:40:56 +0000 (00:40 -0700)]
spi: set spi chipselect gpios HIGH in io_init function
ddl [Mon, 13 Sep 2010 06:40:17 +0000 (14:40 +0800)]
camera:Optimize camera sensor driver, It is easy to transplante for new camera sensor
chenli [Mon, 13 Sep 2010 02:32:04 +0000 (10:32 +0800)]
在capella_cm3602.c中,将cm3602在dev目录下的设备文件名改为psensor
swj [Mon, 13 Sep 2010 02:45:30 +0000 (19:45 -0700)]
modified jogball driver for it50
swj [Sun, 12 Sep 2010 09:27:40 +0000 (02:27 -0700)]
modefied file for jogball
lhh [Sat, 11 Sep 2010 16:23:46 +0000 (00:23 +0800)]
add ov9650 for it50 and del tca6424 for i2c set low one
xwj [Sat, 11 Sep 2010 05:16:21 +0000 (13:16 +0800)]
Merge branch 'develop' of xwj@10.10.10.201:/home/rockchip/rk2818/kernel into develop
xwj [Sat, 11 Sep 2010 05:11:22 +0000 (13:11 +0800)]
add ac100 support
lhh [Fri, 10 Sep 2010 17:08:01 +0000 (01:08 +0800)]
update config for it50
swj [Fri, 10 Sep 2010 15:52:13 +0000 (08:52 -0700)]
add jogball
ChenJQ [Fri, 10 Sep 2010 07:54:38 +0000 (00:54 -0700)]
Add set volume for call in codec wm8994
srt [Fri, 10 Sep 2010 07:36:05 +0000 (15:36 +0800)]
add touchscreen calibration function
luowei [Fri, 10 Sep 2010 03:17:39 +0000 (11:17 +0800)]
delete charge_ok pin's scanning for external gpio
lyx [Fri, 10 Sep 2010 01:22:48 +0000 (18:22 -0700)]
spi:modify spi drivers, add wait_busy after write
lhh [Thu, 9 Sep 2010 14:26:45 +0000 (22:26 +0800)]
Merge branch 'develop' of lhh@10.10.10.201:/home/rockchip/rk2818/kernel into develop
lhh [Thu, 9 Sep 2010 14:26:23 +0000 (22:26 +0800)]
it50 bt io change
luowei [Thu, 9 Sep 2010 12:06:52 +0000 (20:06 +0800)]
add suspend and resume support for fpga
lyx [Thu, 9 Sep 2010 10:23:23 +0000 (03:23 -0700)]
spi: improve spi driver
swj [Thu, 9 Sep 2010 09:35:56 +0000 (02:35 -0700)]
modified t50 adckey
lhh [Thu, 9 Sep 2010 07:51:39 +0000 (15:51 +0800)]
it50 backlight high
swj [Thu, 9 Sep 2010 02:22:30 +0000 (19:22 -0700)]
modified it50 defconfig file
swj [Thu, 9 Sep 2010 02:14:24 +0000 (19:14 -0700)]
swj add it50 adckey
lhh [Wed, 8 Sep 2010 14:20:32 +0000 (22:20 +0800)]
add it50 touch
宋秀杰 [Wed, 8 Sep 2010 13:04:29 +0000 (06:04 -0700)]
add expand gpio soft interrupt in kconfig, so modify raho defconfig, amended some places which is not standard
lhh [Wed, 8 Sep 2010 11:46:00 +0000 (19:46 +0800)]
update info it50 config
lhh [Wed, 8 Sep 2010 09:27:42 +0000 (17:27 +0800)]
Merge branch 'develop' of lhh@10.10.10.201:/home/rockchip/rk2818/kernel into develop
lhh [Wed, 8 Sep 2010 09:27:32 +0000 (17:27 +0800)]
add info it50 and add uart0-3 config
黄涛 [Wed, 8 Sep 2010 07:15:20 +0000 (15:15 +0800)]
Revert "gpio: label和宏定义匹配,方便调试"
This reverts commit
0b193d2d8e3f8d893c7a2ee922c563ddf45dcd22.
黄涛 [Wed, 8 Sep 2010 06:26:31 +0000 (14:26 +0800)]
tca6424: 提前设置chip->client,tca6424_setup_gpio会访问到。移除部分编译警告
黄涛 [Wed, 8 Sep 2010 06:23:21 +0000 (14:23 +0800)]
gpio: label和宏定义匹配,方便调试
黄涛 [Wed, 8 Sep 2010 06:21:03 +0000 (14:21 +0800)]
board-*: 移除部分编译警告,其中names是指针的数组,不能直接赋为字符串,会引起内核oops
黄涛 [Wed, 8 Sep 2010 06:15:35 +0000 (14:15 +0800)]
mach-rk2818/Kconfig: 修订USB唤醒说明
宋秀杰 [Wed, 8 Sep 2010 02:18:03 +0000 (19:18 -0700)]
modify expand gpio tca6424'interrupt to respond Matrix Keyboard,At the same
time separate soft interrupt from tca6424.c
Details:rk2818_info_defconfig default open soft interrupt and matrix keyboard.
board-infosdk.c modify I2C1 mode from IRQ to POLL,add member for struct
rk2818_tca6424_data, add privata data for Matrix Keyboard.board.h modify
tca6424_platform_data.Kconfig and Makefile add soft interrupt Configuration.
soft_interrupt.c and tca6424.c are the main modify, they will not affect other
modules.i2c-rk2818.c retain control SCL function for old tca6424 device,it
will remove later.Matrix Keyboard.c is modify based on kernel Matrix Keyboard.c
file.
黄涛 [Tue, 7 Sep 2010 10:35:52 +0000 (18:35 +0800)]
rk2818_fb: fix memory leak
root [Tue, 7 Sep 2010 09:25:19 +0000 (17:25 +0800)]
delete printk in alarm and add pulldown in xpt2046
ChenJQ [Tue, 7 Sep 2010 06:12:41 +0000 (23:12 -0700)]
Change mdelay to msleep.Open recorder when musie is playing for video.
luowei [Mon, 6 Sep 2010 10:36:17 +0000 (18:36 +0800)]
add LCD_RESET and FPGA_RESET again,deal with a bug in rk2818_batter
luowei [Mon, 6 Sep 2010 10:33:19 +0000 (18:33 +0800)]
add LCD_RESET and FPGA_RESET again,deal with a bug in rk2818_batter.cdrivers/fpga/spi_fpga_init.c
黄涛 [Mon, 6 Sep 2010 08:55:32 +0000 (16:55 +0800)]
rk2818_lp8725: fix error handling, which may make kernel panic
黄涛 [Mon, 6 Sep 2010 07:08:26 +0000 (15:08 +0800)]
defconfig: disable cpufreq debug
luowei [Mon, 6 Sep 2010 05:06:39 +0000 (13:06 +0800)]
change spi_gpio interrupt trigger type name
root [Sat, 4 Sep 2010 16:53:40 +0000 (00:53 +0800)]
delete delay in rtc probe
root [Sat, 4 Sep 2010 15:14:42 +0000 (23:14 +0800)]
commit code adapte raho board
hxy [Sat, 4 Sep 2010 14:38:09 +0000 (22:38 +0800)]
modify change charge current
lyx [Sat, 4 Sep 2010 13:40:39 +0000 (06:40 -0700)]
spi:修改spi驱动的工作方式,提高spi驱动的效率
luowei [Sat, 4 Sep 2010 13:03:33 +0000 (21:03 +0800)]
mask spi_dpram's debug info
luowei [Sat, 4 Sep 2010 13:02:28 +0000 (21:02 +0800)]
change fpga_gpio interrupt trigger type name
hxy [Sat, 4 Sep 2010 12:35:24 +0000 (20:35 +0800)]
change charge current
ChenJQ [Sat, 4 Sep 2010 08:54:47 +0000 (01:54 -0700)]
change wm8994 codec headset incall channel
root [Fri, 3 Sep 2010 14:16:14 +0000 (22:16 +0800)]
add cmmb and commit code adapting raho board
lbt [Fri, 3 Sep 2010 13:01:46 +0000 (21:01 +0800)]
add bt rfkill support for the raho board platform
lbt [Thu, 2 Sep 2010 08:41:58 +0000 (16:41 +0800)]
config:info: config rfkill
jiangyk [Fri, 3 Sep 2010 03:56:51 +0000 (11:56 +0800)]
Merge branch 'develop' of 10.10.10.201:/home/rockchip/rk2818/kernel into develop
jiangyk [Fri, 3 Sep 2010 03:52:39 +0000 (11:52 +0800)]
提交v4l2 和ov2655的默认支持
修改arch/arm/configs/rk2818_info_defconfig 文件,默认支持v4l2 和ov2655
ChenJQ [Fri, 3 Sep 2010 02:39:57 +0000 (19:39 -0700)]
修改wm8994 codec resume没有声音,取消resume调用hw_write
lhh [Fri, 3 Sep 2010 01:22:36 +0000 (09:22 +0800)]
update rk2818_headset for cjq
lbt [Thu, 2 Sep 2010 08:33:03 +0000 (16:33 +0800)]
mach:infosdk: add file board-infosdk-rfkill.c to support bt rfkill
lbt [Thu, 2 Sep 2010 08:10:49 +0000 (16:10 +0800)]
drivers:bluetooth: remove the file bcm4325.c
lbt [Thu, 2 Sep 2010 08:01:39 +0000 (16:01 +0800)]
bt:rfkill: add bluetooth rfkill support
lhh [Thu, 2 Sep 2010 06:48:18 +0000 (14:48 +0800)]
del no use something for infosdk
kfx [Thu, 2 Sep 2010 04:28:42 +0000 (12:28 +0800)]
fix 'sdio_probe return error when host controller's status is data_busy. data_busy occurs when wifi module is NOT inserted.'
ddl [Thu, 2 Sep 2010 02:59:22 +0000 (10:59 +0800)]
camera:fix memory leak, the struct videobuf_buffer which malloced videobuf_alloc isn't free after camera exit
ddl [Thu, 2 Sep 2010 02:58:21 +0000 (10:58 +0800)]
camera:add qcif for ov2655
ddl [Thu, 2 Sep 2010 02:52:43 +0000 (10:52 +0800)]
camera:add sensor power and reset active level configuration
ddl [Thu, 2 Sep 2010 02:50:15 +0000 (10:50 +0800)]
sound:fix kmalloc called with GFP_KERNEL flag is error in atomic context
root [Thu, 2 Sep 2010 03:03:25 +0000 (11:03 +0800)]
switch ctp touchpannel to i2c0
ChenJQ [Wed, 1 Sep 2010 12:21:03 +0000 (05:21 -0700)]
打开18信息机的8994使能脚,关闭耳机检测部分打印,解决释放IRQ错误
黄涛 [Wed, 1 Sep 2010 05:58:37 +0000 (13:58 +0800)]
dsp: 打开电源域时避免访问DDR
ChenJQ [Wed, 1 Sep 2010 05:32:47 +0000 (22:32 -0700)]
Wm8994 codec 修改通话通路和蓝牙通路,添加18信息机耳机检测
根据锐合的板子调试了通话通路。
另外添加了18信息机耳机检测,添加了上升沿下降沿触发选项,添加了耳机接入时管脚是高电平或低电平选项。
黄涛 [Tue, 31 Aug 2010 05:09:21 +0000 (13:09 +0800)]
ddr: 合并2.6.25 release 1.06
黄涛 [Tue, 31 Aug 2010 05:06:45 +0000 (13:06 +0800)]
clock: 变频不运行在TCM中。运行在TCM必须关中断,否者栈可能会错误。
root [Mon, 30 Aug 2010 11:52:59 +0000 (19:52 +0800)]
config gsensor l/p sensor and headset detch
root [Mon, 30 Aug 2010 11:39:49 +0000 (19:39 +0800)]
net:wireless:bcm4329: add CONFIG_WIFI_CONTROL_FUNC into the kernel
root [Mon, 30 Aug 2010 11:28:56 +0000 (19:28 +0800)]
net:wireless:bcm4329: add wifi power gpio control. wifi devce is on the board, it has no real card insert/remove action.
we simulate card detection by power/reset on or off the card.
黄涛 [Mon, 30 Aug 2010 07:20:41 +0000 (15:20 +0800)]
clock: set arm_clk rate to 576MHz early
luowei [Mon, 30 Aug 2010 06:50:45 +0000 (14:50 +0800)]
create another workqueue for adc timer_work
luowei [Mon, 30 Aug 2010 06:37:18 +0000 (14:37 +0800)]
create another workqueue for adc timer_work
黄涛 [Mon, 30 Aug 2010 04:14:25 +0000 (12:14 +0800)]
rk2818_fb: use codec pll
黄涛 [Mon, 30 Aug 2010 03:50:17 +0000 (11:50 +0800)]
pm: 使用clock相关函数进入slow模式,加入调试相关函数等
黄涛 [Mon, 30 Aug 2010 03:45:25 +0000 (11:45 +0800)]
clock: 融合2.6.25 release v1.06
* clock设置pll频率采用渐进方式。
* 变频使用192M和576M,保证apb频率固定为48M。
黄涛 [Mon, 30 Aug 2010 03:38:56 +0000 (11:38 +0800)]
tcm: use dtcm instead of sram. dtcm is ok now.