SCSI: mpt2sas: Fix for issue Missing delay not getting set during system bootup

commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.

Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked.  The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: mpt2sas: fix firmware failure with wrong task attribute

commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: zfcp: status read buffers on first adapter open with link down

commit 9edf7d75ee5f21663a0183d21f702682d0ef132f upstream.

Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93
"[SCSI] zfcp: Use status_read_buf_num provided by FCP channel"
started using a value returned by the channel but only evaluated the value
if the fabric link is up.
Commit 8d88cf3f3b9af4713642caeb221b6d6a42019001
"[SCSI] zfcp: Update status read mempool"
introduced mempool resizings based on the above value.
On setting an FCP device online for the very first time since boot, a new
zeroed adapter object is allocated. If the link is down, the number of
status read requests remains zero. Since just the config data exchange is
incomplete, we proceed with adapter open recovery. However, we
unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in
this case.

This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process
"zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW
and zfcp_erp_thread in the Call Trace.

Don't evaluate channel values which are invalid on link down. The number of
status read requests is always valid, evaluated, and set to a positive
minimum greater than zero. The adapter open recovery can proceed and the
channel has status read buffers to inform us on a future link up event.
While we are not aware of any other code path that could result in mempool
resize attempts of size zero, we still also initialize the number of status
read buffers to be posted to a static minimum number on adapter object
allocation.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: zfcp: block queue limits with data router

commit 5fea4291deacd80188b996d2f555fc6a1940e5d4 upstream.

Commit 86a9668a8d29ea711613e1cb37efa68e7c4db564
"[SCSI] zfcp: support for hardware data router"
reduced the initial block queue limits in the scsi_host_template to the
absolute minimum and adjusted them later on. However, the adjustment was
too late for the BSG devices of Scsi_Host and fc_host.

Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a
BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result,
users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return
with error HBA_STATUS_ERROR.

Initialize the block queue limits in zfcp_scsi_host_template to the
greatest common denominator (GCD).

While we cannot exploit the slightly enlarged maximum request size with
data router, this should be neglectible. Doing so also avoids running into
trouble after live guest relocation (LGR) / migration from a data router
FCP device to an FCP device that does not support data router. In that
case, zfcp would figure out the new limits on adapter recovery, but the
fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and
now too large queue limits.

It should also OK, not to use half the size as in the DIX case, because
fc_host and Scsi_Host do not transport FCP requests including SCSI commands
using protection data.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down

commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.

FCP device remains in status ERP_FAILED when device is switched online
or adapter recovery is triggered  while link to SAN is down.

When Exchange Configuration Data command returns the FSF status
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process.
The only retries are done during the common error recovery procedure
(i.e. max. 3 retries with 8sec sleep between) and remains in status
ERP_FAILED with QDIO down.

This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c
(zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the
adapter recovery will be finished without any retries. QDIO will be
up now and status changes such as LINK UP will be received now.

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: aacraid: Fix for arrays are going offline in the system. System hangs

commit c5bebd829dd95602c15f8da8cc50fa938b5e0254 upstream.

One of the customer had reported that the set of raid logical arrays will
become unavailable (I/O offline) after a long hours of IO stress test.  The OS
wouldn`t be accessible afterwards and require a hard reset.

This driver patch has a fix for race condition between the doorbell and the
circular buffer. The driver is modified to do an extra read after clearing the
doorbell in case there had been a completion posted during the small timing
window.

With this fix, we ran IO stress for ~13 days. There were no IO failures.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: sd: Update WRITE SAME heuristics

commit 66c28f97120e8a621afd5aa7a31c4b85c547d33d upstream.

SATA drives located behind a SAS controller would incorrectly receive
WRITE SAME commands. Tweak the heuristics so that:

 - If REPORT SUPPORTED OPERATION CODES is provided we will use that to
   choose between WRITE SAME(16), WRITE SAME(10) and disabled. This also
   fixes an issue with the old code which would issue WRITE SAME(10)
   despite the command not being whitelisted in REPORT SUPPORTED
   OPERATION CODES.

 - If REPORT SUPPORTED OPERATION CODES is not provided we will fall back
   to WRITE SAME(10) unless the device has an ATA Information VPD page.
   The assumption is that a SATL which is smart enough to implement
   WRITE SAME would also provide REPORT SUPPORTED OPERATION CODES.

To facilitate the new heuristics scsi_report_opcode() has been modified
to so we can distinguish between "operation not supported" and "RSOC not
supported".

Reported-by: H. Peter Anvin <hpa@zytor.com>
Tested-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Do not assign noise for NULL caldata

commit d3bcb7b24bbf09fde8405770e676fe0c11c79662 upstream.

ah->noise is maintained globally and not per-channel. This
is updated in the reset() routine after the NF history has been
filled for the *current channel*, just before switching to
the new channel. There is no need to do it inside getnf(), since
ah->noise must contain a value for the new channel.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Fix noisefloor calibration

commit 696df78509d1f81b651dd98ecdc1aecab616db6b upstream.

The commits,

"ath9k: Fix regression in channelwidth switch at the same channel"
"ath9k: Fix invalid noisefloor reading due to channel update"

attempted to fix noisefloor calibration when a channel switch
happens due to HT20/HT40 bandwidth change. This is causing invalid
readings resulting in messages like:

"ath: phy16: NF[0] (-45) > MAX (-95), correcting to MAX".

This results in an incorrect noise being used initially for reporting
the signal level of received packets, until NF calibration is done
and the history buffer is updated via the ANI timer, which happens
much later.

When a bandwidth change happens, it is appropriate to reset
the internal history data for the channel. Do this correctly in the
reset() routine by checking the "chanmode" variable.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_hw: Assign default xlna config for AR9485

commit 30d5b709da23f4ab9836c7f66d2d2e780a69cf12 upstream.

For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: rt2800lib: fix default TX power check for RT55xx

commit 0847beb2865f5ef1c8626ec1a37def18f3d6c41a upstream.

The code writes the default_power2 value into the TX field
of the RFCSR50 register, however the condition in the if
statement uses default_power1. Due to this, wrong TX power
value might be written into the register.

Use the correct value in the condition to fix the issue.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: read 5GHz TX power values from the correct offset

commit 0a6f3a8ebaf13407523c2c7d575b4ca2debd23ba upstream.

The current code uses the same index value both
for the channel information array and for the TX
power table. The index starts from 14, however the
index of the TX power table must start from zero.

Fix it, in order to get the correct TX power value
for a given channel.

The changes in rt61pci.c and rt73usb.c are compile
tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource: dw_apb: Fix error check

commit 1a33bd2be705cbb3f57d7223b60baea441039307 upstream.

irq_of_parse_and_map() returns 0 on error, while the code checks for NO_IRQ.
This breaks on platforms that have NO_IRQ != 0.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick: Prevent uncontrolled switch to oneshot mode

commit 1f73a9806bdd07a5106409bbcab3884078bd34fe upstream.

When the system switches from periodic to oneshot mode, the broadcast
logic causes a possibility that a CPU which has not yet switched to
oneshot mode puts its own clock event device into oneshot mode without
updating the state and the timer handler.

CPU0 CPU1
per cpu tickdev is in periodic mode
and switched to broadcast

Switch to oneshot mode
 tick_broadcast_switch_to_oneshot()
  cpumask_copy(tick_oneshot_broacast_mask,
       tick_broadcast_mask);

  broadcast device mode = oneshot

Timer interrupt

irq_enter()
 tick_check_oneshot_broadcast()
  dev->set_mode(ONESHOT);

tick_handle_periodic()
 if (dev->mode == ONESHOT)
   dev->next_event += period;
   FAIL.

We fail, because dev->next_event contains KTIME_MAX, if the device was
in periodic mode before the uncontrolled switch to oneshot happened.

We must copy the broadcast bits over to the oneshot mask, because
otherwise a CPU which relies on the broadcast would not been woken up
anymore after the broadcast device switched to oneshot mode.

So we need to verify in tick_check_oneshot_broadcast() whether the CPU
has already switched to oneshot mode. If not, leave the device
untouched and let the CPU switch controlled into oneshot mode.

This is a long standing bug, which was never noticed, because the main
user of the broadcast x86 cannot run into that scenario, AFAICT. The
nonarchitected timer mess of ARM creates a gazillion of differently
broken abominations which trigger the shortcomings of that broadcast
code, which better had never been necessary in the first place.

Reported-and-tested-by: Stehle Vincent-B46079 <B46079@freescale.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307012153060.4013@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick: Sanitize broadcast control logic

commit 07bd1172902e782f288e4d44b1fde7dec0f08b6f upstream.

The recent implementation of a generic dummy timer resulted in a
different registration order of per cpu local timers which made the
broadcast control logic go belly up.

If the dummy timer is the first clock event device which is registered
for a CPU, then it is installed, the broadcast timer is initialized
and the CPU is marked as broadcast target.

If a real clock event device is installed after that, we can fail to
take the CPU out of the broadcast mask. In the worst case we end up
with two periodic timer events firing for the same CPU. One from the
per cpu hardware device and one from the broadcast.

Now the problem is that we have no way to distinguish whether the
system is in a state which makes broadcasting necessary or the
broadcast bit was set due to the nonfunctional dummy timer
installment.

To solve this we need to keep track of the system state seperately and
provide a more detailed decision logic whether we keep the CPU in
broadcast mode or not.

The old decision logic only clears the broadcast mode, if the newly
installed clock event device is not affected by power states.

The new logic clears the broadcast mode if one of the following is
true:

  - The new device is not affected by power states.

  - The system is not in a power state affected mode

  - The system has switched to oneshot mode. The oneshot broadcast is
    controlled from the deep idle state. The CPU is not in idle at
    this point, so it's safe to remove it from the mask.

If we clear the broadcast bit for the CPU when a new device is
installed, we also shutdown the broadcast device when this was the
last CPU in the broadcast mask.

If the broadcast bit is kept, then we leave the new device in shutdown
state and rely on the broadcast to deliver the timer interrupts via
the broadcast ipis.

Reported-and-tested-by: Stehle Vincent-B46079 <B46079@freescale.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307012153060.4013@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: fix two problems with RAID10 resync.

commit 7bb23c4934059c64cbee2e41d5d24ce122285176 upstream.

1/ When an different between blocks is found, data is copied from
   one bio to the other.  However bv_len is used as the length to
   copy and this could be zero.  So use r10_bio->sectors to calculate
   length instead.
   Using bv_len was probably always a bit dubious, but the introduction
   of bio_advance made it much more likely to be a problem.

2/ When preparing some blocks for sync, we don't set BIO_UPTODATE
   except on bios that we schedule for a read.  This ensures that
   missing/failed devices don't confuse the loop at the top of
   sync_request write.
   Commit 8be185f2c9d54d6 "raid10: Use bio_reset()"
   removed a loop which set BIO_UPTDATE on all appropriate bios.
   So we need to re-add that flag.

These bugs were introduced in 3.10, so this patch is suitable for
3.10-stable, and can remove a potential for data corruption.

Reported-by: Brassow Jonathan <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: fix two bugs affecting RAID10 reshape.

commit 78eaa0d4cbcdb345992fa3dd22b3bcbb473cc064 upstream.

1/ If a RAID10 is being reshaped to a fewer number of devices
 and is stopped while this is ongoing, then when the array is
 reassembled the 'mirrors' array will be allocated too small.
 This will lead to an access error or memory corruption.

2/ A sanity test for a reshaping RAID10 array is restarted
 is slightly incorrect.

Due to the first bug, this is suitable for any -stable
kernel since 3.5 where this code was introduced.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: fix bug which causes all RAID10 reshapes to move no data.

commit 1376512065b23f39d5f9a160948f313397dde972 upstream.

The recent comment:
commit 7e83ccbecd608b971f340e951c9e84cd0343002f
    md/raid10: Allow skipping recovery when clean arrays are assembled

Causes raid10 to skip a recovery in certain cases where it is safe to
do so.  Unfortunately it also causes a reshape to be skipped which is
never safe.  The result is that an attempt to reshape a RAID10 will
appear to complete instantly, but no data will have been moves so the
array will now contain garbage.
(If nothing is written, you can recovery by simple performing the
reverse reshape which will also complete instantly).

Bug was introduced in 3.10, so this is suitable for 3.10-stable.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Martin Wilck <mwilck@arcor.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

commit 5c78dfe87ea04b501ee000a7f03b9432ac9d008c upstream.

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of
register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.

Reported-by: Oskar Schirmer <oskar@scara.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: atmel: Fix unlocked snd_pcm_stop() call

commit 571185717f8d7f2a088a7ac38d94a9ad5fd9da5c upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: s6000: Fix unlocked snd_pcm_stop() call

commit 61be2b9a18ec70f3cbe3deef7a5f77869c71b5ae upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c-piix4: Add AMD CZ SMBus device ID

commit b996ac90f595dda271cbd858b136b45557fc1a57 upstream.

To add AMD CZ SMBus controller device ID.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sata_highbank: increase retry count but shorten duration for Calxeda controller

commit ddfef5de3d716f77bad32dbbba6b280158dfd721 upstream.

Increase the retry count for the hard reset function to 100 but
shorten the time out period to 500 ms. See the comment for
ahci_highbank_hardreset for the reasons why those vaulues were
chosen.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs

commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: skip SRST for all SIMG [34]7x port-multipliers

commit 7a87718d92760fc688628ad6a430643dafa16f1f upstream.

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata-zpodd: must use ata_tf_init()

commit d0887c43f51c308b01605346e55d906ba858a6f9 upstream.

There are  some SATA controllers which have both devices 0 and 1 but this module
just zeroes out taskfile and sets then ATA_TFLAG_DEVICE (not sure that's needed)
which could  lead to a wrong device being selected just before issuing command.
Thus we should  call ata_tf_init()  which sets  up the device register value
properly, like  all other users of ata_exec_internal() do...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775

commit 41fa9a944fce1d7efd5ee3d50ac85b92f42dcc3d upstream.

NCT6775 does not support alarms for fans 4 and 5. Drop the attributes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct6775) Fix temperature alarm attributes

commit b1d2bff6a61140454b9d203519cc686a2e9ef32f upstream.

Driver displays wrong alarms for temperature attributes.

Turns out that temperature alarm bits are not fixed, but determined
by temperature source mapping. To fix the problem, walk through
the temperature sources to determine the correct alarm bit associated
with a given attribute.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usx2y: Fix unlocked snd_pcm_stop() call

commit 5be1efb4c2ed79c3d7c0cbcbecae768377666e84 upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: asihpi: Fix unlocked snd_pcm_stop() call

commit 60478295d6876619f8f47f6d1a5c25eaade69ee3 upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: atiixp: Fix unlocked snd_pcm_stop() call

commit cc7282b8d5abbd48c81d1465925d464d9e3eaa8f upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call

commit 46f6c1aaf790be9ea3c8ddfc8f235a5f677d08e2 upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ua101: Fix unlocked snd_pcm_stop() call

commit 9538aa46c2427d6782aa10036c4da4c541605e0e upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: 6fire: Fix unlocked snd_pcm_stop() call

commit 5b9ab3f7324a1b94a5a5a76d44cf92dfeb3b5e80 upstream.

snd_pcm_stop() must be called in the PCM substream lock context.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq-oss: Initialize MIDI clients asynchronously

commit 256ca9c3ad5013ff8a8f165e5a82fab437628c8e upstream.

We've got bug reports that the module loading stuck on Debian system
with 3.10 kernel.  The debugging session revealed that the initial
registration of OSS sequencer clients stuck at module loading time,
which involves again with request_module() at the init phase.  This is
triggered only by special --install stuff Debian is using, but it's
still not good to have such loops.

As a workaround, call the registration part asynchronously.  This is a
better approach irrespective of the hang fix, in anyway.

Reported-and-tested-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add new GPU codec ID to snd-hda

commit d52392b1a80458c0510810789c7db4a39b88022a upstream.

Vendor ID 0x10de0060 is used by a yet-to-be-named GPU chip.

Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix the max length of control name in generic parser

commit 0c055b3413868227f2e85701c4e6938c9581f0e2 upstream.

add_control_with_pfx() in hda_generic.c assumes a shorter name string
for the control element, and this resulted in the truncation of the
long but valid string like "Headphone Surround Switch" in the middle.

This patch aligns the max size to the actual limit of snd_ctl_elem_id,
44.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix missing Mic Boost controls for VIA codecs

commit d045c5dc43d829df9f067d363c3b42b14dacf434 upstream.

Some VIA codecs like VT1708S have Mic boost amps in the mic pins but
they aren't exposed in the capability bits.  In the past driver code,
we override the pin caps and create mic boost controls forcibly.
While transition to the generic parser, we lost the mic boost controls
although the pin caps are still overridden, because the generic parser
code checks the widget caps, too.

So this patch adds a new helper function to allow the override of the
given widget capability bits, and makes VIA codecs driver to add the
missing input-amp capability bit.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59861
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Cache the MUX selection for generic HDMI

commit bddee96b5d0db869f47b195fe48c614ca824203c upstream.

When a selection to a converter MUX is changed in hdmi_pcm_open(), it
should be cached so that the given connection can be restored properly
at PM resume.  We need just to replace the corresponding
snd_hda_codec_write() call with snd_hda_codec_write_cache().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix return value of snd_hda_check_power_state()

commit 06ec56d3c60238f27bfa50d245592fccc1b4ef0f upstream.

The refactoring by commit 9040d102 introduced the new function
snd_hda_check_power_state().  This function is supposed to return true
if the state already reached to the target state, but it actually
returns false for that.  An utterly stupid typo while copy & paste.

Fortunately this didn't influence on much behavior because powering up
AFG usually powers up the child widgets, too.  But the finer power
control must have been broken by this bug.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix EAPD vmaster hook for AD1884 & co

commit 8f0b3b7e222383a21f7d58bd97d5552b3a5dbced upstream.

ad1884_fixup_hp_eapd() tries to set the NID for controlling the
speaker EAPD from the pin configuration.  But the current code can't
work expectedly since it sets spec->eapd_nid before calling the
generic parser where the autocfg pins are set up.

This patch changes the function to set spec->eapd_nid after the
generic parser call while it sets vmaster hook unconditionally.  The
spec->eapd_nid check is moved in the hook function itself instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: inkern: fix iio_convert_raw_to_processed_unlocked

commit f91d1b63a4e096d3023aaaafec9d9d3aff25997f upstream.

When reading IIO_CHAN_INFO_OFFSET, the return value of iio_channel_read() for
success will be IIO_VAL*, checking for 0 is not correct.

Without this fix the offset applied by iio drivers will be ignored when
converting a raw value to one in appropriate base units (e.g mV) in
a IIO client drivers that use iio_convert_raw_to_processed including
iio-hwmon.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: Fix iio_channel_has_info

commit 1c297a66654a3295ae87e2b7f3724d214eb2b5ec upstream.

Since the info_mask split, iio_channel_has_info() is not working correctly.
info_mask_separate and info_mask_shared_by_type, it is not possible to compare
them directly with the iio_chan_info_enum enum. Correct that bit using the BIT()
macro.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: don't treat user cache maintenance faults as writes

commit db6f41063cbdb58b14846e600e6bc3f4e4c2e888 upstream.

On arm64, cache maintenance faults appear as data aborts with the CM
bit set in the ESR. The WnR bit, usually used to distinguish between
faulting loads and stores, always reads as 1 and (slightly confusingly)
the instructions are treated as reads by the architecture.

This patch fixes our fault handling code to treat cache maintenance
faults in the same way as loads.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Revert commit 2f7021a8 to fix CPU hotplug regression

commit e8d05276f236ee6435e78411f62be9714e0b9377 upstream.

commit 2f7021a8 "cpufreq: protect 'policy->cpus' from offlining
during __gov_queue_work()" caused a regression in CPU hotplug,
because it lead to a deadlock between cpufreq governor worker thread
and the CPU hotplug writer task.

Lockdep splat corresponding to this deadlock is shown below:

[   60.277396] ======================================================
[   60.277400] [ INFO: possible circular locking dependency detected ]
[   60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted
[   60.277411] -------------------------------------------------------
[   60.277417] bash/2225 is trying to acquire lock:
[   60.277422]  ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280
[   60.277444] but task is already holding lock:
[   60.277449]  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60
[   60.277465] which lock already depends on the new lock.

[   60.277472] the existing dependency chain (in reverse order) is:
[   60.277477] -> #2 (cpu_hotplug.lock){+.+.+.}:
[   60.277490]        [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.277503]        [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410
[   60.277514]        [<ffffffff81042cbc>] get_online_cpus+0x3c/0x60
[   60.277522]        [<ffffffff814b842a>] gov_queue_work+0x2a/0xb0
[   60.277532]        [<ffffffff814b7891>] cs_dbs_timer+0xc1/0xe0
[   60.277543]        [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0
[   60.277552]        [<ffffffff81063d31>] worker_thread+0x121/0x3a0
[   60.277560]        [<ffffffff8106ae2b>] kthread+0xdb/0xe0
[   60.277569]        [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0
[   60.277580] -> #1 (&j_cdbs->timer_mutex){+.+...}:
[   60.277592]        [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.277600]        [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410
[   60.277608]        [<ffffffff814b785d>] cs_dbs_timer+0x8d/0xe0
[   60.277616]        [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0
[   60.277624]        [<ffffffff81063d31>] worker_thread+0x121/0x3a0
[   60.277633]        [<ffffffff8106ae2b>] kthread+0xdb/0xe0
[   60.277640]        [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0
[   60.277649] -> #0 ((&(&j_cdbs->work)->work)){+.+...}:
[   60.277661]        [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30
[   60.277669]        [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.277677]        [<ffffffff810621ed>] flush_work+0x3d/0x280
[   60.277685]        [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120
[   60.277693]        [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20
[   60.277701]        [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0
[   60.277709]        [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20
[   60.277719]        [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100
[   60.277728]        [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0
[   60.277737]        [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c
[   60.277747]        [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110
[   60.277759]        [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10
[   60.277768]        [<ffffffff815a0a68>] _cpu_down+0x88/0x330
[   60.277779]        [<ffffffff815a0d46>] cpu_down+0x36/0x50
[   60.277788]        [<ffffffff815a2748>] store_online+0x98/0xd0
[   60.277796]        [<ffffffff81452a28>] dev_attr_store+0x18/0x30
[   60.277806]        [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150
[   60.277818]        [<ffffffff8116806d>] vfs_write+0xbd/0x1f0
[   60.277826]        [<ffffffff811686fc>] SyS_write+0x4c/0xa0
[   60.277834]        [<ffffffff815bbbbe>] tracesys+0xd0/0xd5
[   60.277842] other info that might help us debug this:

[   60.277848] Chain exists of:
  (&(&j_cdbs->work)->work) --> &j_cdbs->timer_mutex --> cpu_hotplug.lock

[   60.277864]  Possible unsafe locking scenario:

[   60.277869]        CPU0                    CPU1
[   60.277873]        ----                    ----
[   60.277877]   lock(cpu_hotplug.lock);
[   60.277885]                                lock(&j_cdbs->timer_mutex);
[   60.277892]                                lock(cpu_hotplug.lock);
[   60.277900]   lock((&(&j_cdbs->work)->work));
[   60.277907]  *** DEADLOCK ***

[   60.277915] 6 locks held by bash/2225:
[   60.277919]  #0:  (sb_writers#6){.+.+.+}, at: [<ffffffff81168173>] vfs_write+0x1c3/0x1f0
[   60.277937]  #1:  (&buffer->mutex){+.+.+.}, at: [<ffffffff811d9e3c>] sysfs_write_file+0x3c/0x150
[   60.277954]  #2:  (s_active#61){.+.+.+}, at: [<ffffffff811d9ec3>] sysfs_write_file+0xc3/0x150
[   60.277972]  #3:  (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81024cf7>] cpu_hotplug_driver_lock+0x17/0x20
[   60.277990]  #4:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff815a0d32>] cpu_down+0x22/0x50
[   60.278007]  #5:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60
[   60.278023] stack backtrace:
[   60.278031] CPU: 3 PID: 2225 Comm: bash Not tainted 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744
[   60.278037] Hardware name: Acer             Aspire 5741G    /Aspire 5741G    , BIOS V1.20 02/08/2011
[   60.278042]  ffffffff8204e110 ffff88014df6b9f8 ffffffff815b3d90 ffff88014df6ba38
[   60.278055]  ffffffff815b0a8d ffff880150ed3f60 ffff880150ed4770 3871c4002c8980b2
[   60.278068]  ffff880150ed4748 ffff880150ed4770 ffff880150ed3f60 ffff88014df6bb00
[   60.278081] Call Trace:
[   60.278091]  [<ffffffff815b3d90>] dump_stack+0x19/0x1b
[   60.278101]  [<ffffffff815b0a8d>] print_circular_bug+0x2b6/0x2c5
[   60.278111]  [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30
[   60.278123]  [<ffffffff81067e08>] ? __kernel_text_address+0x58/0x80
[   60.278134]  [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200
[   60.278142]  [<ffffffff810621b5>] ? flush_work+0x5/0x280
[   60.278151]  [<ffffffff810621ed>] flush_work+0x3d/0x280
[   60.278159]  [<ffffffff810621b5>] ? flush_work+0x5/0x280
[   60.278169]  [<ffffffff810a9b14>] ? mark_held_locks+0x94/0x140
[   60.278178]  [<ffffffff81062d77>] ? __cancel_work_timer+0x77/0x120
[   60.278188]  [<ffffffff810a9cbd>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[   60.278196]  [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120
[   60.278206]  [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20
[   60.278214]  [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0
[   60.278225]  [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20
[   60.278234]  [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100
[   60.278244]  [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0
[   60.278255]  [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c
[   60.278265]  [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110
[   60.278275]  [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10
[   60.278284]  [<ffffffff815a0a68>] _cpu_down+0x88/0x330
[   60.278292]  [<ffffffff81024cf7>] ? cpu_hotplug_driver_lock+0x17/0x20
[   60.278302]  [<ffffffff815a0d46>] cpu_down+0x36/0x50
[   60.278311]  [<ffffffff815a2748>] store_online+0x98/0xd0
[   60.278320]  [<ffffffff81452a28>] dev_attr_store+0x18/0x30
[   60.278329]  [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150
[   60.278337]  [<ffffffff8116806d>] vfs_write+0xbd/0x1f0
[   60.278347]  [<ffffffff81185950>] ? fget_light+0x320/0x4b0
[   60.278355]  [<ffffffff811686fc>] SyS_write+0x4c/0xa0
[   60.278364]  [<ffffffff815bbbbe>] tracesys+0xd0/0xd5
[   60.280582] smpboot: CPU 1 is now offline

The intention of that commit was to avoid warnings during CPU
hotplug, which indicated that offline CPUs were getting IPIs from the
cpufreq governor's work items.  But the real root-cause of that
problem was commit a66b2e5 (cpufreq: Preserve sysfs files across
suspend/resume) because it totally skipped all the cpufreq callbacks
during CPU hotplug in the suspend/resume path, and hence it never
actually shut down the cpufreq governor's worker threads during CPU
offline in the suspend/resume path.

Reflecting back, the reason why we never suspected that commit as the
root-cause earlier, was that the original issue was reported with
just the halt command and nobody had brought in suspend/resume to the
equation.

The reason for _that_ in turn, as it turns out, is that earlier
halt/shutdown was being done by disabling non-boot CPUs while tasks
were frozen, just like suspend/resume....  but commit cf7df378a
(reboot: migrate shutdown/reboot to boot cpu) which came somewhere
along that very same time changed that logic: shutdown/halt no longer
takes CPUs offline.  Thus, the test-cases for reproducing the bug
were vastly different and thus we went totally off the trail.

Overall, it was one hell of a confusion with so many commits
affecting each other and also affecting the symptoms of the problems
in subtle ways.  Finally, now since the original problematic commit
(a66b2e5) has been completely reverted, revert this intermediate fix
too (2f7021a8), to fix the CPU hotplug deadlock.  Phew!

Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Tested-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Revert commit a66b2e to fix suspend/resume regression

commit aae760ed21cd690fe8a6db9f3a177ad55d7e12ab upstream.

commit a66b2e (cpufreq: Preserve sysfs files across suspend/resume)
has unfortunately caused several things in the cpufreq subsystem to
break subtly after a suspend/resume cycle.

The intention of that patch was to retain the file permissions of the
cpufreq related sysfs files across suspend/resume.  To achieve that,
the commit completely removed the calls to cpufreq_add_dev() and
__cpufreq_remove_dev() during suspend/resume transitions.  But the
problem is that those functions do 2 kinds of things:
  1. Low-level initialization/tear-down that are critical to the
     correct functioning of cpufreq-core.
  2. Kobject and sysfs related initialization/teardown.

Ideally we should have reorganized the code to cleanly separate these
two responsibilities, and skipped only the sysfs related parts during
suspend/resume.  Since we skipped the entire callbacks instead (which
also included some CPU and cpufreq-specific critical components),
cpufreq subsystem started behaving erratically after suspend/resume.

So revert the commit to fix the regression.  We'll revisit and address
the original goal of that commit separately, since it involves quite a
bit of careful code reorganization and appears to be non-trivial.

(While reverting the commit, note that another commit f51e1eb
 (cpufreq: Fix cpufreq regression after suspend/resume) already
 reverted part of the original set of changes.  So revert only the
 remaining ones).

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Don't enable if we have zero events

commit 4ea355b5368bde0574c12430df53334c4be3bdcf upstream.

In power_pmu_enable() we still enable the PMU even if we have zero
events. This should have no effect but doesn't make much sense. Instead
just return after telling the hypervisor that we are not using the PMCs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Use existing out label in power_pmu_enable()

commit 0a48843d6c5114cfa4a9540ee4d6af87628cec01 upstream.

In power_pmu_enable() we can use the existing out label to reduce the
number of return paths.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Freeze PMC5/6 if we're not using them

commit 7a7a41f9d5b28ac3a916b057a7d3cd3f435ee9a6 upstream.

On Power8 we can freeze PMC5 and 6 if we're not using them. Normally they
run all the time.

As noticed by Anshuman, we should unfreeze them when we disable the PMU
as there are legacy tools which expect them to run all the time.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Rework disable logic in pmu_disable()

commit 378a6ee99e4a431ec84e4e61893445c041c93007 upstream.

In pmu_disable() we disable the PMU by setting the FC (Freeze Counters)
bit in MMCR0. In order to do this we have to read/modify/write MMCR0.

It's possible that we read a value from MMCR0 which has PMAO (PMU Alert
Occurred) set. When we write that value back it will cause an interrupt
to occur. We will then end up in the PMU interrupt handler even though
we are supposed to have just disabled the PMU.

We can avoid this by making sure we never write PMAO back. We should not
lose interrupts because when the PMU is re-enabled the overflowed values
will cause another interrupt.

We also reorder the clearing of SAMPLE_ENABLE so that is done after the
PMU is frozen. Otherwise there is a small window between the clearing of
SAMPLE_ENABLE and the setting of FC where we could take an interrupt and
incorrectly see SAMPLE_ENABLE not set. This would for example change the
logic in perf_read_regs().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Check that events only include valid bits on Power8

commit d8bec4c9cd58f6d3679e09b7293851fb92ad7557 upstream.

A mistake we have made in the past is that we pull out the fields we
need from the event code, but don't check that there are no unknown bits
set. This means that we can't ever assign meaning to those unknown bits
in future.

Although we have once again failed to do this at release, it is still
early days for Power8 so I think we can still slip this in and get away
with it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/numa: Do not update sysfs cpu registration from invalid context

commit dd023217e17e72b46fb4d49c7734c426938c3dba upstream.

The topology update code that updates the cpu node registration in sysfs
should not be called while in stop_machine(). The register/unregister
calls take a lock and may sleep.

This patch moves these calls outside of the call to stop_machine().

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/smp: Section mismatch from smp_release_cpus to __initdata spinning_secondaries

commit 8246aca7058f3f2c2ae503081777965cd8df7b90 upstream.

the smp_release_cpus is a normal funciton and called in normal environments,
  but it calls the __initdata spinning_secondaries.
  need modify spinning_secondaries to match smp_release_cpus.

the related warning:
  (the linker report boot_paca.33377, but it should be spinning_secondaries)

-----------------------------------------------------------------------------

WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

-----------------------------------------------------------------------------

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Wire up the HV facility unavailable exception

commit b14b6260efeee6eb8942c6e6420e31281892acb6 upstream.

Similar to the facility unavailble exception, except the facilities are
controlled by HFSCR.

Adapt the facility_unavailable_exception() so it can be called for
either the regular or Hypervisor facility unavailable exceptions.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Rename and flesh out the facility unavailable exception handler

commit 021424a1fce335e05807fd770eb8e1da30a63eea upstream.

The exception at 0xf60 is not the TM (Transactional Memory) unavailable
exception, it is the "Facility Unavailable Exception", rename it as
such.

Flesh out the handler to acknowledge the fact that it can be called for
many reasons, one of which is TM being unavailable.

Use STD_EXCEPTION_COMMON() for the exception body, for some reason we
had it open-coded, I've checked the generated code is identical.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Remove KVMTEST from RELON exception handlers

commit c9f69518e5f08170bc857984a077f693d63171df upstream.

KVMTEST is a macro which checks whether we are taking an exception from
guest context, if so we branch out of line and eventually call into the
KVM code to handle the switch.

When running real guests on bare metal (HV KVM) the hardware ensures
that we never take a relocation on exception when transitioning from
guest to host. For PR KVM we disable relocation on exceptions ourself in
kvmppc_core_init_vm(), as of commit a413f47 "Disable relocation on
exceptions whenever PR KVM is active".

So convert all the RELON macros to use NOTEST, and drop the remaining
KVM_HANDLER() definitions we have for 0xe40 and 0xe80.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Remove unreachable relocation on exception handlers

commit 1d567cb4bd42d560a7621cac6f6aebe87343689e upstream.

We have relocation on exception handlers defined for h_data_storage and
h_instr_storage. However we will never take relocation on exceptions for
these because they can only come from a guest, and we never take
relocation on exceptions when we transition from guest to host.

We also have a handler for hmi_exception (Hypervisor Maintenance) which
is defined in the architecture to never be delivered with relocation on,
see see v2.07 Book III-S section 6.5.

So remove the handlers, leaving a branch to self just to be double extra
paranoid.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix return of active 64bit signals

commit 87b4e5393af77f5cba124638f19f6c426e210aec upstream.

Currently we only restore signals which are transactionally suspended but it's
possible that the transaction can be restored even when it's active.  Most
likely this will result in a transactional rollback by the hardware as the
transaction will have been doomed by an earlier treclaim.

The current code is a legacy of earlier kernel implementations which did
software rollback of active transactions in the kernel.  That code has now gone
but we didn't correctly fix up this part of the signals code which still makes
assumptions based on having software rollback.

This changes the signal return code to always restore both contexts on 64 bit
signal return.  It also ensures that the MSR TM bits are properly restored from
the signal context which they are not currently.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix return of 32bit rt signals to active transactions

commit 55e4341850ac56e63a3eefe9583a9000042164fa upstream.

Currently we only restore signals which are transactionally suspended but it's
possible that the transaction can be restored even when it's active.  Most
likely this will result in a transactional rollback by the hardware as the
transaction will have been doomed by an earlier treclaim.

The current code is a legacy of earlier kernel implementations which did
software rollback of active transactions in the kernel.  That code has now gone
but we didn't correctly fix up this part of the signals code which still makes
assumptions based on having software rollback.

This changes the signal return code to always restore both contexts on 32 bit
rt signal return.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix restoration of MSR on 32bit signal return

commit 2c27a18f8736da047bef2b997bdd48efc667e3c9 upstream.

Currently we clear out the MSR TM bits on signal return assuming that the
signal should never return to an active transaction.

This is bogus as the user may do this.  It's most likely the transaction will
be doomed due to a treclaim but that's a problem for the HW not the kernel.

The current code is a legacy of earlier kernel implementations which did
software rollback of active transactions in the kernel.  That code has now gone
but we didn't correctly fix up this part of the signals code which still makes
the assumption that it must be returning to a suspended transaction.

This pulls out both MSR TM bits from the user supplied context rather than just
setting TM suspend.  We pull out only the bits needed to ensure the user can't
do anything dangerous to the MSR.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix 32 bit non-rt signals

commit fee55450710dff32a13ae30b4129ec7b5a4b44d0 upstream.

Currently sys_sigreturn() is TM unaware.  Therefore, if we take a 32 bit signal
without SIGINFO (non RT) inside a transaction, on signal return we don't
restore the signal frame correctly.

This checks if the signal frame being restoring is an active transaction, and
if so, it copies the additional state to ptregs so it can be restored.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix writing top half of MSR on 32 bit signals

commit 1d25f11fdbcc5390d68efd98c28900bfd29b264c upstream.

The MSR TM controls are in the top 32 bits of the MSR hence on 32 bit signals,
we stick the top half of the MSR in the checkpointed signal context so that the
user can access it.

Unfortunately, we don't currently write anything to the checkpointed signal
context when coming in a from a non transactional process and hence the top MSR
bits can contain junk.

This updates the 32 bit signal handling code to always write something to the
top MSR bits so that users know if the process is transactional or not and the
kernel can use it on signal return.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: Fix iommu initialization again

commit 74251fe21bfa9310ddba9e0436d1fcf389e602ee upstream.

So because those things always end up in trainwrecks... In 7846de406
we moved back the iommu initialization earlier, essentially undoing
37f02195b which was causing us endless trouble... except that in the
meantime we had merged 959c9bdd58 (to workaround the original breakage)
which is now ... broken :-)

This fixes it by doing a partial revert of the latter (we keep the
ppc_md. path which will be needed in the hotplug case, which happens
also during some EEH error recovery situations).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hw_brk: Fix off by one error when validating DAWR region end

commit e2a800beaca1f580945773e57d1a0e7cd37b1056 upstream.

The Data Address Watchpoint Register (DAWR) on POWER8 can take a 512
byte range but this range must not cross a 512 byte boundary.

Unfortunately we were off by one when calculating the end of the region,
hence we were not allowing some breakpoint regions which were actually
valid.  This fixes this error.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Reported-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hw_brk: Fix clearing of extraneous IRQ

commit 540e07c67efe42ef6b6be4f1956931e676d58a15 upstream.

In 9422de3 "powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint
registers" we changed the way we mark extraneous irqs with this:

- info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) &&
- (dar - bp->attr.bp_addr < bp->attr.bp_len));
+ if (!((bp->attr.bp_addr <= dar) &&
+       (dar - bp->attr.bp_addr < bp->attr.bp_len)))
+ info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;

Unfortunately this is bogus as it never clears extraneous IRQ if it's already
set.

This correctly clears extraneous IRQ before possibly setting it.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Reported-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hw_brk: Fix setting of length for exact mode breakpoints

commit b0b0aa9c7faf94e92320eabd8a1786c7747e40a8 upstream.

The smallest match region for both the DABR and DAWR is 8 bytes, so the
kernel needs to filter matches when users want to look at regions smaller than
this.

Currently we set the length of PPC_BREAKPOINT_MODE_EXACT breakpoints to 8.
This is wrong as in exact mode we should only match on 1 address, hence the
length should be 1.

This ensures that the kernel will filter out any exact mode hardware breakpoint
matches on any addresses other than the requested one.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Reported-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.2

UBIFS: correct mount message

commit beadadfa5467e09e36891f39cae1f5d8d3bbf17e upstream.

When mounting an UBIFS R/W volume, we have the message:
UBIFS: mounted UBI device 0, volume 1, name "rootfs"(null)
With this patch, we'll have:
UBIFS: mounted UBI device 0, volume 1, name "rootfs"
Which is, I think, what was intended.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Handle big endianness in NTLM (ntlmv2) authentication

commit fdf96a907c1fbb93c633e2b7ede3b8df26d6a4c0 upstream.

This is RH bug 970891
Uppercasing of username during calculation of ntlmv2 hash fails
because UniStrupr function does not handle big endian wchars.

Also fix a comment in the same code to reflect its correct usage.

[To make it easier for stable (rather than require 2nd patch) fixed
this patch of Shirish's to remove endian warning generated
by sparse -- steve f.]

Reported-by: steve <sanpatr1@in.ibm.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory-hotplug: fix lowmem count overflow when offline pages

commit cea27eb2a202959783f81254c48c250ddd80e129 upstream.

The logic for the memory-remove code fails to correctly account the
Total High Memory when a memory block which contains High Memory is
offlined as shown in the example below.  The following patch fixes it.

Before logic memory remove:

MemTotal:        7603740 kB
MemFree:         6329612 kB
Buffers:           94352 kB
Cached:           872008 kB
SwapCached:            0 kB
Active:           626932 kB
Inactive:         519216 kB
Active(anon):     180776 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296272 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5704696 kB
LowTotal:         309068 kB
LowFree:          624916 kB

After logic memory remove:

MemTotal:        7079452 kB
MemFree:         5805976 kB
Buffers:           94372 kB
Cached:           872000 kB
SwapCached:            0 kB
Active:           626936 kB
Inactive:         519236 kB
Active(anon):     180780 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296292 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5181024 kB
LowTotal:       4294752076 kB
LowFree:          624952 kB

[mhocko@suse.cz: fix CONFIG_HIGHMEM=n build]
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg, kmem: fix reference count handling on the error path

commit f37a96914d1aea10fed8d9af10251f0b9caea31b upstream.

mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails.
This is not correct because only memcg_propagate_kmem takes an
additional reference while mem_cgroup_sockets_init is allowed to fail as
well (although no current implementation fails) but it doesn't take any
reference.  This all suggests that it should be memcg_propagate_kmem
that should clean up after itself so this patch moves mem_cgroup_put
over there.

Unfortunately this is not that easy (as pointed out by Li Zefan) because
memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is
marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if
memcg_propagate_kmem fails so the additional reference is dropped in
that case in kmem_cgroup_destroy which means that the reference would be
dropped two times.

The easiest way then would be to simply remove mem_cgrroup_put from
mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right
thing.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()

commit da331ba8e9c5de72a27e50f71105395bba6eebe0 upstream.

tasklet_kill() may sleep so call it before taking pch->lock.

Fixes following lockup:

  BUG: scheduling while atomic: cat/2383/0x00000002
  Modules linked in:
    unwind_backtrace+0x0/0xfc
    __schedule_bug+0x4c/0x58
    __schedule+0x690/0x6e0
    sys_sched_yield+0x70/0x78
    tasklet_kill+0x34/0x8c
    pl330_free_chan_resources+0x24/0x88
    dma_chan_put+0x4c/0x50
  [...]
  BUG: spinlock lockup suspected on CPU#0, swapper/0/0
   lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1
    unwind_backtrace+0x0/0xfc
    do_raw_spin_lock+0x194/0x204
    _raw_spin_lock_irqsave+0x20/0x28
    pl330_tasklet+0x2c/0x5a8
    tasklet_action+0xfc/0x114
    __do_softirq+0xe4/0x19c
    irq_exit+0x98/0x9c
    handle_IPI+0x124/0x16c
    gic_handle_irq+0x64/0x68
    __irq_svc+0x40/0x70
    cpuidle_wrap_enter+0x4c/0xa0
    cpuidle_enter_state+0x18/0x68
    cpuidle_idle_call+0xac/0xe0
    cpu_idle+0xac/0xf0

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: mm: fix boot on SA1110 Assabet

commit 319e0b4f02f73983c03a2ca38595fc6367929edf upstream.

Commit 83db0384 (mm/ARM: use common help functions to free reserved
pages) broke booting on the Assabet by trying to convert a PFN to
a virtual address using the __va() macro.  This macro takes the
physical address, not a PFN.  Fix this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: shmobile: emev2 GIO3 resource fix

commit 1eb14ea1e6bcd11d6d0ba937fc39808bb4d3453e upstream.

Fix GIO3 base addresses for EMEV2.

This bug was introduced by 088efd9273b5076a0aead479aa31f1066d182b3e
("mach-shmobile: Emma Mobile EV2 GPIO support V3") which was included in v3.5.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: shmobile: r8a73a4: Fix resources for SCIFB0

commit f820b60582f75e73e83b8505d7e48fe59770f558 upstream.

Fix base address and IRQ resources associated with SCIFB0.

This bug was introduced by e481a528901d0cd18b5b5fcbdc55207ea3b6ef68
("ARM: shmobile: r8a73a4 SCIF support V3") which was included in v3.10.

Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Acked-by: Magnus Damm <damm@opensource.se>
[ horms+renesas@verge.net.au: Add information about commit and version
  this bug was added in ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx: cpus/cpu nodes dts updates

commit 7925e89f54fc49bcd1e73f0a65c4a3eb35b9cfb1 upstream.

This patch updates the in-kernel dts files according to the latest cpus
and cpu bindings updates for ARM.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7778/1: smp_twd: twd_update_frequency need be run on all online CPUs

commit cbbe6f82b489e7ceba4ad7c833bd3a76cd0084cb upstream.

When the local timer freq changed, the twd_update_frequency function
should be run all the CPUs include itself, otherwise, the twd freq will
not get updated and the local timer will not run correcttly.

smp_call_function will run functions on all other CPUs, but not include
himself, this is not correct,use on_each_cpu instead to fix this issue.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation

commit 0d0752bca1f9a91fb646647aa4abbb21156f316c upstream.

Looking into the active_asids array is not enough, as we also need
to look into the reserved_asids array (they both represent processes
that are currently running).

Also, not holding the ASID allocator lock is racy, as another CPU
could schedule that process and trigger a rollover, making the erratum
workaround miss an IPI.

Exposing this outside of context.c is a little ugly on the side, so
let's define a new entry point that the erratum workaround can call
to obtain the cpumask.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator

commit b8e4a4740fa2b17c0a447b3ab783b3dc10702e27 upstream.

On a CPU that never ran anything, both the active and reserved ASID
fields are set to zero. In this case the ASID_TO_IDX() macro will
return -1, which is not a very useful value to index a bitmap.

Instead of trying to offset the ASID so that ASID #1 is actually
bit 0 in the asid_map bitmap, just always ignore bit 0 and start
the search from bit 1. This makes the code a bit more readable,
and without risk of OoB access.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7767/1: let the ASID allocator handle suspended animation

commit ae120d9edfe96628f03d87634acda0bfa7110632 upstream.

When a CPU is running a process, the ASID for that process is
held in a per-CPU variable (the "active ASIDs" array). When
the ASID allocator handles a rollover, it copies the active
ASIDs into a "reserved ASIDs" array to ensure that a process
currently running on another CPU will continue to run unaffected.
The active array is zero-ed to indicate that a rollover occurred.

Because of this mechanism, a reserved ASID is only remembered for
a single rollover. A subsequent rollover will completely refill
the reserved ASIDs array.

In a severely oversubscribed environment where a CPU can be
prevented from running for extended periods of time (think virtual
machines), the above has a horrible side effect:

[P{a} denotes process P running with ASID a]

CPU-0 CPU-1

A{x} [active = <x 0>]

[suspended] runs B{y} [active = <x y>]

[rollover:
 active = <0 0>
 reserved = <x y>]

runs B{y} [active = <0 y>
 reserved = <x y>]

[rollover:
 active = <0 0>
 reserved = <0 y>]

runs C{x} [active = <0 x>]

[resumes]

runs A{x}

At that stage, both A and C have the same ASID, with deadly
consequences.

The fix is to preserve reserved ASIDs across rollovers if
the CPU doesn't have an active ASID when the rollover occurs.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Carinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7765/1: perf: Record the user-mode PC in the call chain.

commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't allow ext4_free_blocks() to fail due to ENOMEM

commit e7676a704ee0a1ef71a6b23760b5a8f6896cb1a1 upstream.

The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory.  Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS.  And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.

Reported-by: Nagachandra P <nagachandra@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't show usrquota/grpquota twice in /proc/mounts

commit ad065dd01662ae22138899e6b1c8eeb3a529964f upstream.

We now print mount options in a generic fashion in
ext4_show_options(), so we shouldn't be explicitly printing the
{usr,grp}quota options in ext4_show_quota_options().

Without this patch, /proc/mounts can look like this:

 /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0
                                      ^^^^^^^^              ^^^^^^^^

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix ext4_get_group_number()

commit 960fd856fdc3b08b3638f3f9b6b4bfceb77660c7 upstream.

The function ext4_get_group_number() was introduced as an optimization
in commit bd86298e60b8.  Unfortunately, this commit incorrectly
calculate the group number for file systems with a 1k block size (when
s_first_data_block is 1 instead of zero).  This could cause the
following kernel BUG:

[  568.877799] ------------[ cut here ]------------
[  568.877833] kernel BUG at fs/ext4/mballoc.c:3728!
[  568.877840] Oops: Exception in kernel mode, sig: 5 [#1]
[  568.877845] SMP NR_CPUS=32 NUMA pSeries
[  568.877852] Modules linked in: binfmt_misc
[  568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1
[  568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000
[  568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8
[  568.877879] REGS: c0000001fa956ed0 TRAP: 0700   Not tainted  (3.10.0-03216-g7c6809f-dirty)
[  568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 24000428  XER: 00000000
[  568.877902] SOFTE: 1
[  568.877905] CFAR: c0000000002b5464
[  568.877908]
GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000
GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f
GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000
GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0
GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672
GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000
GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288
GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10
[  568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0
[  568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0
[  568.878004] Call Trace:
[  568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable)
[  568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444
[  568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734
[  568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4
[  568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178
[  568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490
[  568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60
[  568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80
[  568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0
[  568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc
[  568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4
[  568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80
[  568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c
[  568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90
[  568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c
[  568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c
[  568.878125] Instruction dump:
[  568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70
[  568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78
[  568.878160] ---[ end trace 594d911d9654770b ]---

In addition fix the STD_GROUP optimization so that it works for
bigalloc file systems as well.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflow when counting used blocks on 32-bit architectures

commit 8af8eecc1331dbf5e8c662022272cf667e213da5 upstream.

The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs

commit a60697f411eb365fb09e639e6f183fe33d1eb796 upstream.

On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflows in SEEK_HOLE, SEEK_DATA implementations

commit e7293fd146846e2a44d29e0477e0860c60fb856b upstream.

ext4_lblk_t is just u32 so multiplying it by blocksize can easily
overflow for files larger than 4 GB. Fix that by properly typing the
block offsets before shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix data offset overflow on 32-bit archs in ext4_inline_data_fiemap()

commit eaf3793728d07d995f1e74250b2d0005f7ae98b5 upstream.

On 32-bit archs when sector_t is defined as 32-bit the logic computing
data offset in ext4_inline_data_fiemap(). Fix that by properly typing
the shifted value.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: only do the tree_mod_log_free_eb if this is our last ref

commit 7fb7d76f96bfcbea25007d190ba828b18e13d29d upstream.

There is another bug in the tree mod log stuff in that we're calling
tree_mod_log_free_eb every single time a block is cow'ed.  The problem with this
is that if this block is shared by multiple snapshots we will call this multiple
times per block, so if we go to rewind the mod log for this block we'll BUG_ON()
in __tree_mod_log_rewind because we try to rewind a free twice.  We only want to
call tree_mod_log_free_eb if we are actually freeing the block.  With this patch
I no longer hit the panic in __tree_mod_log_rewind.  Thanks,

Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: hold the tree mod lock in __tree_mod_log_rewind

commit f1ca7e98a67da618d8595866e0860308525154da upstream.

We need to hold the tree mod log lock in __tree_mod_log_rewind since we walk
forward in the tree mod entries, otherwise we'll end up with random entries and
trip the BUG_ON() at the front of __tree_mod_log_rewind.  This fixes the panics
people were seeing when running

find /whatever -type f -exec btrfs fi defrag {} \;

Thansk,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix estale with btrfs send

commit 139f807a1eba1e484941a98fb93ee32ad859a6a1 upstream.

This fixes bugzilla 57491.  If we take a snapshot of a fs with a unlink ongoing
and then try to send that root we will run into problems.  When comparing with a
parent root we will search the parents and the send roots commit_root, which if
we've just created the snapshot will include the file that needs to be evicted
by the orphan cleanup.  So when we find a changed extent we will try and copy
that info into the send stream, but when we lookup the inode we use the normal
root, which no longer has the inode because the orphan cleanup deleted it.  The
best solution I have for this is to check our otransid with the generation of
the commit root and if they match just commit the transaction again, that way we
get the changes from the orphan cleanup.  With this patch the reproducer I made
for this bugzilla no longer returns ESTALE when trying to do the send.  Thanks,

Reported-by: Chris Wilson <jakdaw@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timer: Fix jiffies wrap behavior of round_jiffies_common()

commit 9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1 upstream.

Direct compare of jiffies related values does not work in the wrap
around case. Replace it with time_is_after_jiffies().

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/519BC066.5080600@acm.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: remove pmp link online check in FBS EH

commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream.

ata_link_online() check in ahci_error_intr() is unnecessary, it should
be removed otherwise may lead to lockup with FBS enabled PMP.
http://marc.info/?l=linux-ide&m=137050421603272&w=2

Reported-by: Yu Liu <liuyu.ac@gmail.com>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs

commit 1cfc7df3de10c40ed459e13cce6de616023bf41c upstream.

This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: Add AMD CZ SATA device ID

commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream.

To add AMD CZ SATA controller device ID of IDE mode.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: wake the queue if stopped when being unmapped

commit 8a487b1a7432b20ff3f82387a8ce7555a964b44e upstream.

When the queue is unmapped while it was so loaded that
mac80211's was stopped, we need to wake the queue after
having freed all the packets in the queue.
Not doing so can result in weird stuff like:

* run lots of traffic (mac80211's queue gets stopped)
* RFKILL
* de-assert RFKILL
* no traffic

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: fix race in queue unmapping

commit b967613d7e7c7bad176f5627c55e2d8c5aa2480e upstream.

When a queue is disabled, it frees all its entries. Later,
the op_mode might still get notifications from the firmware
that triggers to free entries in the tx queue. The transport
should be prepared for these races and know to ignore
reclaim calls on queues that have been disabled and whose
entries have been freed.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix refcount issue in pci_create_root_bus() error recovery path

commit 343df771e671d821478dd3ef525a0610b808dbf8 upstream.

After calling device_register(&bridge->dev), the bridge is reference-
counted, and it is illegal to call kfree() on it except in the release
function.

[bhelgaas: changelog, use put_device() after device_register() failure]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Finish SR-IOV VF setup before adding the device

commit fbf33f516bdbcc2ab1ba1e54dfb720b0cfaa6874 upstream.

Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible"
moves device registering from pci_bus_add_devices() to pci_device_add().
That causes problems for virtual functions because device_add(&virtfn->dev)
is called before setting the virtfn->is_virtfn flag, which then causes Xen
to report PCI virtual functions as PCI physical functions.

Fix it by setting virtfn->is_virtfn before calling pci_device_add().

[Jiang Liu]: Move the setting of virtfn->is_virtfn ahead further for better
readability and modify changelog.

Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: correct disconnect behavior

commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream.

Currently, when a disconnect is requested by the user (via NBD_DISCONNECT
ioctl) the return from NBD_DO_IT is undefined (it is usually one of
several error codes).  This means that nbd-client does not know if a
manual disconnect was performed or whether a network error occurred.
Because of this, nbd-client's persist mode (which tries to reconnect after
error, but not after manual disconnect) does not always work correctly.

This change fixes this by causing NBD_DO_IT to always return 0 if a user
requests a disconnect.  This means that nbd-client can correctly either
persist the connection (if an error occurred) or disconnect (if the user
requested it).

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>