Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data

commit 1c3415a06b1016a596bfe59e0cfee56c773aa958 upstream.

The following crash may be seen if bad data is received from the
touchscreen.

[ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff
[ 2189.430738] divide error: 0000 [#1] PREEMPT SMP
[ 2189.434679] gsmi: Log Shutdown Reason 0x03
[ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi
uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi
i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel
snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi
snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform
snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231
fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs
joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer
kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq
snd_seq_device ppp_async ppp_generic slhc tun
[ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G        W
3.18.0-13101-g57e8190 #1
[ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016
[ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000
[ 2189.434913] RIP: 0010:[<ffffffffbecc48d5>]  [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200
[ 2189.434937] RSP: 0018:ffff88017a2bfd98  EFLAGS: 00010293
[ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8
[ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000
[ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000
[ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800
[ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80
[ 2189.435011] FS:  0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000
[ 2189.435022] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0
[ 2189.435039] Stack:
[ 2189.435044]  ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574
[ 2189.435060]  0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53
[ 2189.435074]  ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574
[ 2189.435089] Call Trace:
[ 2189.435101]  [<ffffffffbe8a2a53>] ? irq_thread_dtor+0xa9/0xa9
[ 2189.435112]  [<ffffffffbe8a2a73>] irq_thread_fn+0x20/0x40
[ 2189.435123]  [<ffffffffbe8a2be1>] irq_thread+0x14e/0x222
[ 2189.435135]  [<ffffffffbee8cbeb>] ? __schedule+0x3b3/0x57a
[ 2189.435145]  [<ffffffffbe8a29aa>] ? wake_threads_waitq+0x2d/0x2d
[ 2189.435156]  [<ffffffffbe8a2a93>] ? irq_thread_fn+0x40/0x40
[ 2189.435168]  [<ffffffffbe87c385>] kthread+0x10e/0x116
[ 2189.435178]  [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67
[ 2189.435189]  [<ffffffffbee900ac>] ret_from_fork+0x7c/0xb0
[ 2189.435199]  [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67
[ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c
24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 <f7> ff
83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac
[ 2189.435312] RIP  [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200
[ 2189.435323]  RSP <ffff88017a2bfd98>
[ 2189.435350] ---[ end trace f4945345a75d96dd ]---
[ 2189.443841] Kernel panic - not syncing: Fatal exception
[ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 2189.444519] gsmi: Log Shutdown Reason 0x02

The problem was seen with a 3.18 based kernel, but there is no reason
to believe that the upstream code is safe.

Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix open and resume after B0

commit a20047f36e2f6a1eea4f1fd261aaa55882369868 upstream.

The private baud_rate variable is used to configure the port at open and
reset-resume and must never be set to (and left at) zero or reset-resume
and all further open attempts will fail.

Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct")
Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix control-message error handling

commit 2d5a9c72d0c4ac73cf97f4b7814ed6c44b1e49ae upstream.

A short control transfer would currently fail to be detected, something
which could lead to stale buffer data being used as valid input.

Check for short transfers, and make sure to log any transfer errors.

Note that this also avoids leaking heap data to user space (TIOCMGET)
and the remote device (break control).

Fixes: 6ce76104781a ("USB: Driver for CH341 USB-serial adaptor")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix open error handling

commit f2950b78547ffb8475297ada6b92bc2d774d5461 upstream.

Make sure to stop the interrupt URB before returning on errors during
open.

Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix initial modem-control state

commit 4e2da44691cffbfffb1535f478d19bc2dca3e62b upstream.

DTR and RTS will be asserted by the tty-layer when the port is opened
and deasserted on close (if HUPCL is set). Make sure the initial state
is not-asserted before the port is first opened as well.

Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: kl5kusb105: fix line-state error handling

commit 146cc8a17a3b4996f6805ee5c080e7101277c410 upstream.

The current implementation failed to detect short transfers when
attempting to read the line state, and also, to make things worse,
logged the content of the uninitialised heap transfer buffer.

Fixes: abf492e7b3ae ("USB: kl5kusb105: fix DMA buffers on stack")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: fix sched scan netlink socket owner destruction

commit 753aacfd2e95df6a0caf23c03dc309020765bea9 upstream.

A single netlink socket might own multiple interfaces *and* a
scheduled scan request (which might belong to another interface),
so when it goes away both may need to be destroyed.

Remove the schedule_scan_stop indirection to fix this - it's only
needed for interface destruction because of the way this works
right now, with a single work taking care of all interfaces.

Fixes: 93a1e86ce10e4 ("nl80211: Stop scheduled scan if netlink client disappears")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Introduce segmented_write_std

commit 129a72a0d3c8e139a04512325384fe5ac119e74d upstream.

Introduces segemented_write_std.

Switches from emulated reads/writes to standard read/writes in fxsave,
fxrstor, sgdt, and sidt.  This fixes CVE-2017-2584, a longstanding
kernel memory leak.

Since commit 283c95d0e389 ("KVM: x86: emulate FXSAVE and FXRSTOR",
2016-11-09), which is luckily not yet in any final release, this would
also be an exploitable kernel memory *write*!

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 96051572c819194c37a8367624b285be10297eca
Fixes: 283c95d0e3891b64087706b344a4b545d04a6e62
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: emulate FXSAVE and FXRSTOR

commit 283c95d0e3891b64087706b344a4b545d04a6e62 upstream.

Internal errors were reported on 16 bit fxsave and fxrstor with ipxe.
Old Intels don't have unrestricted_guest, so we have to emulate them.

The patch takes advantage of the hardware implementation.

AMD and Intel differ in saving and restoring other fields in first 32
bytes.  A test wrote 0xff to the fxsave area, 0 to upper bits of MCSXR
in the fxsave area, executed fxrstor, rewrote the fxsave area to 0xee,
and executed fxsave:

  Intel (Nehalem):
    7f 1f 7f 7f ff 00 ff 07 ff ff ff ff ff ff 00 00
    ff ff ff ff ff ff 00 00 ff ff 00 00 ff ff 00 00
  Intel (Haswell -- deprecated FPU CS and FPU DS):
    7f 1f 7f 7f ff 00 ff 07 ff ff ff ff 00 00 00 00
    ff ff ff ff 00 00 00 00 ff ff 00 00 ff ff 00 00
  AMD (Opteron 2300-series):
    7f 1f 7f 7f ff 00 ee ee ee ee ee ee ee ee ee ee
    ee ee ee ee ee ee ee ee ff ff 00 00 ff ff 02 00

fxsave/fxrstor will only be emulated on early Intels, so KVM can't do
much to improve the situation.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: add asm_safe wrapper

commit aabba3c6abd50b05b1fc2c6ec44244aa6bcda576 upstream.

Move the existing exception handling for inline assembly into a macro
and switch its return values to X86EMUL type.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: add Align16 instruction flag

commit d3fe959f81024072068e9ed86b39c2acfd7462a9 upstream.

Needed for FXSAVE and FXRSTOR.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: flush pending lapic jump label updates on module unload

commit cef84c302fe051744b983a92764d3fcca933415d upstream.

KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled).
These are implemented with delayed_work structs which can still be
pending when the KVM module is unloaded. We've seen this cause kernel
panics when the kvm_intel module is quickly reloaded.

Use the new static_key_deferred_flush() API to flush pending updates on
module unload.

Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jump_labels: API for flushing deferred jump label updates

commit b6416e61012429e0277bd15a229222fd17afc1c1 upstream.

Modules that use static_key_deferred need a way to synchronize with
any delayed work that is still pending when the module is unloaded.
Introduce static_key_deferred_flush() which flushes any pending
jump label updates.

Signed-off-by: David Matlack <dmatlack@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: eventfd: fix NULL deref irqbypass consumer

commit 4f3dbdf47e150016aacd734e663347fcaa768303 upstream.

Reported syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
    IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
    PGD 0

    Oops: 0002 [#1] SMP
    CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1
    Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm]
    task: ffff9bbe0dfbb900 task.stack: ffffb61802014000
    RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
    Call Trace:
     irqfd_shutdown+0x66/0xa0 [kvm]
     process_one_work+0x16b/0x480
     worker_thread+0x4b/0x500
     kthread+0x101/0x140
     ? process_one_work+0x480/0x480
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x25/0x30
    RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20
    CR2: 0000000000000008

The syzkaller folks reported a NULL pointer dereference that due to
unregister an consumer which fails registration before. The syzkaller
creates two VMs w/ an equal eventfd occasionally. So the second VM
fails to register an irqbypass consumer. It will make irqfd as inactive
and queue an workqueue work to shutdown irqfd and unregister the irqbypass
consumer when eventfd is closed. However, the second consumer has been
initialized though it fails registration. So the token(same as the first
VM's) is taken to unregister the consumer through the workqueue, the
consumer of the first VM is found and unregistered, then NULL deref incurred
in the path of deleting consumer from the consumers list.

This patch fixes it by making irq_bypass_register/unregister_consumer()
looks for the consumer entry based on consumer pointer itself instead of
token matching.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix emulation of "MOV SS, null selector"

commit 33ab91103b3415e12457e3104f0e4517ce12d0f3 upstream.

This is CVE-2017-2583.  On Intel this causes a failed vmentry because
SS's type is neither 3 nor 7 (even though the manual says this check is
only done for usable SS, and the dmesg splat says that SS is unusable!).
On AMD it's worse: svm.c is confused and sets CPL to 0 in the vmcb.

The fix fabricates a data segment descriptor when SS is set to a null
selector, so that CPL and SS.DPL are set correctly in the VMCS/vmcb.
Furthermore, only allow setting SS to a NULL selector if SS.RPL < 3;
this in turn ensures CPL < 3 because RPL must be equal to CPL.

Thanks to Andy Lutomirski and Willy Tarreau for help in analyzing
the bug and deciphering the manuals.

Reported-by: Xiaohan Zhang <zhangxiaohan1@huawei.com>
Fixes: 79d5b4c3cd809c770d4bf9812635647016c56011
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb.c: fix reservation race when freeing surplus pages

commit e5bbc8a6c992901058bc09e2ce01d16c111ff047 upstream.

return_unused_surplus_pages() decrements the global reservation count,
and frees any unused surplus pages that were backing the reservation.

Commit 7848a4bf51b3 ("mm/hugetlb.c: add cond_resched_lock() in
return_unused_surplus_pages()") added a call to cond_resched_lock in the
loop freeing the pages.

As a result, the hugetlb_lock could be dropped, and someone else could
use the pages that will be freed in subsequent iterations of the loop.
This could result in inconsistent global hugetlb page state, application
api failures (such as mmap) failures or application crashes.

When dropping the lock in return_unused_surplus_pages, make sure that
the global reservation count (resv_huge_pages) remains sufficiently
large to prevent someone else from claiming pages about to be freed.

Analyzed by Paul Cassella.

Fixes: 7848a4bf51b3 ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()")
Link: http://lkml.kernel.org/r/1483991767-6879-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Paul Cassella <cassella@cray.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix crash caused by stale lvb with fsdlm plugin

commit e7ee2c089e94067d68475990bdeed211c8852917 upstream.

The crash happens rather often when we reset some cluster nodes while
nodes contend fiercely to do truncate and append.

The crash backtrace is below:

   dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources
   dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms
   ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18)
   ocfs2: End replay journal (node 318952601, slot 2) on device (253,18)
   ocfs2: Beginning quota recovery on device (253,18) for slot 2
   ocfs2: Finishing quota recovery on device (253,18) for slot 2
   (truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode)
   (truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1
   ------------[ cut here ]------------
   kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470!
   invalid opcode: 0000 [#1] SMP
   Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod    iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport      joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix               drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd       usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
   Supported: No, Unsupported modules are loaded
   CPU: 1 PID: 30154 Comm: truncate Tainted: G           OE   N  4.4.21-69-default #1
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014
   task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000
   RIP: 0010:[<ffffffffa05c8c30>]  [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2]
   RSP: 0018:ffff880074e6bd50  EFLAGS: 00010282
   RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000
   RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
   RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414
   R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448
   R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020
   FS:  00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
   CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0
   Call Trace:
     ocfs2_setattr+0x698/0xa90 [ocfs2]
     notify_change+0x1ae/0x380
     do_truncate+0x5e/0x90
     do_sys_ftruncate.constprop.11+0x108/0x160
     entry_SYSCALL_64_fastpath+0x12/0x6d
   Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff
   RIP  [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2]

It's because ocfs2_inode_lock() get us stale LVB in which the i_size is
not equal to the disk i_size.  We mistakenly trust the LVB because the
underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with
DLM_SBF_VALNOTVALID properly for us.  But, why?

The current code tries to downconvert lock without DLM_LKF_VALBLK flag
to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even
if the lock resource type needs LVB.  This is not the right way for
fsdlm.

The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on
DLM_LKF_VALBLK to decide if we care about the LVB in the LKB.  If
DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from
this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node
failure happens.

The following diagram briefly illustrates how this crash happens:

RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB;

The 1st round:

             Node1                                    Node2
RSB1: PR
                                                  RSB1(master): NULL->EX
ocfs2_downconvert_lock(PR->NULL, set_lvb==0)
  ocfs2_dlm_lock(no DLM_LKF_VALBLK)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

dlm_lock(no DLM_LKF_VALBLK)
  convert_lock(overwrite lkb->lkb_exflags
               with no DLM_LKF_VALBLK)

RSB1: NULL                                        RSB1: EX
                                                  reset Node2
dlm_recover_rsbs()
  recover_lvb()

/* The LVB is not trustable if the node with EX fails and
 * no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1.
 */

 if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to
           return;                   * to invalid the LVB here.
                                     */

The 2nd round:

         Node 1                                Node2
RSB1(become master from recovery)

ocfs2_setattr()
  ocfs2_inode_lock(NULL->EX)
    /* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */
    ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */
  ocfs2_truncate_file()
      mlog_bug_on_msg(disk isize != i_size_read(inode))  /* crash! */

The fix is quite straightforward.  We keep to set DLM_LKF_VALBLK flag
for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin
is uesed.

Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}

commit f931ab479dd24cf7a2c6e2df19778406892591fb upstream.

Both arch_add_memory() and arch_remove_memory() expect a single threaded
context.

For example, arch/x86/mm/init_64.c::kernel_physical_mapping_init() does
not hold any locks over this check and branch:

    if (pgd_val(*pgd)) {
     pud = (pud_t *)pgd_page_vaddr(*pgd);
     paddr_last = phys_pud_init(pud, __pa(vaddr),
        __pa(vaddr_end),
        page_size_mask);
     continue;
    }

    pud = alloc_low_page();
    paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end),
        page_size_mask);

The result is that two threads calling devm_memremap_pages()
simultaneously can end up colliding on pgd initialization.  This leads
to crash signatures like the following where the loser of the race
initializes the wrong pgd entry:

    BUG: unable to handle kernel paging request at ffff888ebfff0000
    IP: memcpy_erms+0x6/0x10
    PGD 2f8e8fc067 PUD 0 /* <---- Invalid PUD */
    Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
    CPU: 54 PID: 3818 Comm: systemd-udevd Not tainted 4.6.7+ #13
    task: ffff882fac290040 ti: ffff882f887a4000 task.ti: ffff882f887a4000
    RIP: memcpy_erms+0x6/0x10
    [..]
    Call Trace:
      ? pmem_do_bvec+0x205/0x370 [nd_pmem]
      ? blk_queue_enter+0x3a/0x280
      pmem_rw_page+0x38/0x80 [nd_pmem]
      bdev_read_page+0x84/0xb0

Hold the standard memory hotplug mutex over calls to
arch_{add,remove}_memory().

Fixes: 41e94a851304 ("add devm_memremap_pages")
Link: http://lkml.kernel.org/r/148357647831.9498.12606007370121652979.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: do not require bash for the generated test

commit a2b1e8a20c992b01eeb76de00d4f534cbe9f3822 upstream.

Nothing in this minimal script seems to require bash. We often run these
tests on embedded devices where the only shell available is the busybox
ash. Use sh instead.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: do not require bash to run netsocktests testcase

commit 3659f98b5375d195f1870c3e508fe51e52206839 upstream.

Nothing in this minimal script seems to require bash. We often run these
tests on embedded devices where the only shell available is the busybox
ash. Use sh instead.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add Pegatron touchpad to noloop table

commit 41c567a5d7d1a986763e58c3394782813c3bcb03 upstream.

Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able
to recognize a Synaptics touchpad in the AUX port.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791
(Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B))

Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - use correct product id for x360w controllers

commit b6fc513da50c5dbc457a8ad6b58b046a6a68fd9d upstream.

currently the controllers get the same product id as the wireless
receiver. However the controllers actually have their own product id.

The patch makes the driver expose the same product id as the windows
driver.

This improves compatibility when running applications with WINE.

see https://github.com/paroj/xpad/issues/54

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.43

mm/init: fix zone boundary creation

commit 90cae1fe1c3540f791d5b8e025985fa5e699b2bb upstream.

As a part of memory initialisation the architecture passes an array to
free_area_init_nodes() which specifies the max PFN of each memory zone.
This array is not necessarily monotonic (due to unused zones) so this
array is parsed to build monotonic lists of the min and max PFN for each
zone.  ZONE_MOVABLE is special cased here as its limits are managed by
the mm subsystem rather than the architecture.  Unfortunately, this
special casing is broken when ZONE_MOVABLE is the not the last zone in
the zone list.  The core of the issue is:

if (i == ZONE_MOVABLE)
continue;
arch_zone_lowest_possible_pfn[i] =
arch_zone_highest_possible_pfn[i-1];

As ZONE_MOVABLE is skipped the lowest_possible_pfn of the next zone will
be set to zero.  This patch fixes this bug by adding explicitly tracking
where the next zone should start rather than relying on the contents
arch_zone_highest_possible_pfn[].

Thie is low priority.  To get bitten by this you need to enable a zone
that appears after ZONE_MOVABLE in the zone_type enum.  As far as I can
tell this means running a kernel with ZONE_DEVICE or ZONE_CMA enabled,
so I can't see this affecting too many people.

I only noticed this because I've been fiddling with ZONE_DEVICE on
powerpc and 4.6 broke my test kernel.  This bug, in conjunction with the
changes in Taku Izumi's kernelcore=mirror patch (d91749c1dda71) and
powerpc being the odd architecture which initialises max_zone_pfn[] to
~0ul instead of 0 caused all of system memory to be placed into
ZONE_DEVICE at boot, followed a panic since device memory cannot be used
for kernel allocations.  I've already submitted a patch to fix the
powerpc specific bits, but I figured this should be fixed too.

Link: http://lkml.kernel.org/r/1462435033-15601-1-git-send-email-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add a quirk for Plantronics BT600

commit 2e40795c3bf344cfb5220d94566205796e3ef19a upstream.

Plantronics BT600 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x1" and "cannot get freq at
ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and
avoids those error messages.

Signed-off-by: Dennis Kadioglu <denk@post.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: mvebu: fix baudrate calculation for armada variant

commit 7243e0b20729d372e97763617a7a9c89f29b33e1 upstream.

The calculation of SPR and SPPR doesn't round correctly at several
places which might result in baud rates that are too big. For example
with tclk_hz = 250000001 and target rate 25000000 it determined a
divider of 10 which is wrong.

Instead of fixing all the corner cases replace the calculation by an
algorithm without a loop which should even be quicker to execute apart
from being correct.

Fixes: df59fa7f4bca ("spi: orion: support armada extended baud rates")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP4+: Fix bad fallthrough for cpuidle

commit cbf2642872333547b56b8c4d943f5ed04ac9a4ee upstream.

We don't want to fall through to a bunch of errors for retention
if PM_OMAP4_CPU_OSWR_DISABLE is not configured for a SoC.

Fixes: 6099dd37c669 ("ARM: OMAP5 / DRA7: Enable CPU RET on suspend")
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: zynq: Reserve correct amount of non-DMA RAM

commit 7a3cc2a7b2c723aa552028f4e66841cec183756d upstream.

On Zynq, we haven't been reserving the correct amount of DMA-incapable
RAM to keep DMA away from it (per the Zynq TRM Section 4.1, it should be
the first 512k). In older kernels, this was masked by the
memblock_reserve call in arm_memblock_init(). Now, reserve the correct
amount excplicitly rather than relying on swapper_pg_dir, which is an
address and not a size anyway.

Fixes: 46f5b96 ("ARM: zynq: Reserve not DMAable space in front of the kernel")
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Tested-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix build warning on 32-bit PPC

commit 8ae679c4bc2ea2d16d92620da8e3e9332fa4039f upstream.

I am getting the following warning when I build kernel 4.9-git on my
PowerBook G4 with a 32-bit PPC processor:

    AS      arch/powerpc/kernel/misc_32.o
  arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef]

This problem is evident after commit 989cea5c14be ("kbuild: prevent
lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an
error that has been in the code since 2005 when this source file was
created.  That was with commit 9994a33865f4 ("powerpc: Introduce
entry_{32,64}.S, misc_{32,64}.S, systbl.S").

The offending line does not make a lot of sense.  This error does not
seem to cause any errors in the executable, thus I am not recommending
that it be applied to any stable versions.

Thanks to Nicholas Piggin for suggesting this solution.

Fixes: 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-tascam: Fix to handle error from initialization of stream data

commit 6a2a2f45560a9cb7bc49820883b042e44f83726c upstream.

This module has a bug not to return error code in a case that data
structure for transmitted packets fails to be initialized.

This commit fixes the bug.

Fixes: 35efa5c489de ("ALSA: firewire-tascam: add streaming functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-cypress: validate length of report

commit 1ebb71143758f45dc0fa76e2f48429e13b16d110 upstream.

Make sure we have enough of a report structure to validate before
looking at it.

Reported-by: Benoit Camredon <benoit.camredon@airbus.com>
Tested-by: Benoit Camredon <benoit.camredon@airbus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

net: vrf: do not allow table id 0

[ Upstream commit 24c63bbc18e25d5d8439422aa5fd2d66390b88eb ]

Frank reported that vrf devices can be created with a table id of 0.
This breaks many of the run time table id checks and should not be
allowed. Detect this condition at create time and fail with EINVAL.

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Reported-by: Frank Kellermann <frank.kellermann@atos.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: Fix multipath selection with vrf

[ Upstream commit 7a18c5b9fb31a999afc62b0e60978aa896fc89e9 ]

fib_select_path does not call fib_select_multipath if oif is set in the
flow struct. For VRF use cases oif is always set, so multipath route
selection is bypassed. Use the FLOWI_FLAG_SKIP_NH_OIF to skip the oif
check similar to what is done in fib_table_lookup.

Add saddr and proto to the flow struct for the fib lookup done by the
VRF driver to better match hash computation for a flow.

Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gro: Disable frag0 optimization on IPv6 ext headers

[ Upstream commit 57ea52a865144aedbcd619ee0081155e658b6f7d ]

The GRO fast path caches the frag0 address.  This address becomes
invalid if frag0 is modified by pskb_may_pull or its variants.
So whenever that happens we must disable the frag0 optimization.

This is usually done through the combination of gro_header_hard
and gro_header_slow, however, the IPv6 extension header path did
the pulling directly and would continue to use the GRO fast path
incorrectly.

This patch fixes it by disabling the fast path when we enter the
IPv6 extension header path.

Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address")
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gro: use min_t() in skb_gro_reset_offset()

[ Upstream commit 7cfd5fd5a9813f1430290d20c0fead9b4582a307 ]

On 32bit arches, (skb->end - skb->data) is not 'unsigned int',
so we shall use min_t() instead of min() to avoid a compiler error.

Fixes: 1272ce87fa01 ("gro: Enter slow-path if there is no tailroom")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gro: Enter slow-path if there is no tailroom

[ Upstream commit 1272ce87fa017ca4cf32920764d879656b7a005a ]

The GRO path has a fast-path where we avoid calling pskb_may_pull
and pskb_expand by directly accessing frag0.  However, this should
only be done if we have enough tailroom in the skb as otherwise
we'll have to expand it later anyway.

This patch adds the check by capping frag0_len with the skb tailroom.

Fixes: cb18978cbf45 ("gro: Open-code final pskb_may_pull")
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: fix rx issue for runtime suspend

[ Upstream commit 75dc692eda114cb234a46cb11893a9c3ea520934 ]

Pause the rx and make sure the rx fifo is empty when the autosuspend
occurs.

If the rx data comes when the driver is canceling the rx urb, the host
controller would stop getting the data from the device and continue
it after next rx urb is submitted. That is, one continuing data is
split into two different urb buffers. That let the driver take the
data as a rx descriptor, and unexpected behavior happens.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: split rtl8152_suspend function

[ Upstream commit 8fb280616878b81c0790a0c33acbeec59c5711f4 ]

Split rtl8152_suspend() into rtl8152_system_suspend() and
rtl8152_rumtime_suspend().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules

[ Upstream commit 5350d54f6cd12eaff623e890744c79b700bd3f17 ]

In the case of custom rules being present we need to handle the case of the
LOCAL table being intialized after the new rule has been added.  To address
that I am adding a new check so that we can make certain we don't use an
alias of MAIN for LOCAL when allocating a new table.

Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Reported-by: Oliver Brunel <jjk@jjacky.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igmp: Make igmp group member RFC 3376 compliant

[ Upstream commit 7ababb782690e03b78657e27bd051e20163af2d6 ]

5.2. Action on Reception of a Query

 When a system receives a Query, it does not respond immediately.
 Instead, it delays its response by a random amount of time, bounded
 by the Max Resp Time value derived from the Max Resp Code in the
 received Query message.  A system may receive a variety of Queries on
 different interfaces and of different kinds (e.g., General Queries,
 Group-Specific Queries, and Group-and-Source-Specific Queries), each
 of which may require its own delayed response.

 Before scheduling a response to a Query, the system must first
 consider previously scheduled pending responses and in many cases
 schedule a combined response.  Therefore, the system must be able to
 maintain the following state:

 o A timer per interface for scheduling responses to General Queries.

 o A per-group and interface timer for scheduling responses to Group-
   Specific and Group-and-Source-Specific Queries.

 o A per-group and interface list of sources to be reported in the
   response to a Group-and-Source-Specific Query.

 When a new Query with the Router-Alert option arrives on an
 interface, provided the system has state to report, a delay for a
 response is randomly selected in the range (0, [Max Resp Time]) where
 Max Resp Time is derived from Max Resp Code in the received Query
 message.  The following rules are then used to determine if a Report
 needs to be scheduled and the type of Report to schedule.  The rules
 are considered in order and only the first matching rule is applied.

 1. If there is a pending response to a previous General Query
    scheduled sooner than the selected delay, no additional response
    needs to be scheduled.

 2. If the received Query is a General Query, the interface timer is
    used to schedule a response to the General Query after the
    selected delay.  Any previously pending response to a General
    Query is canceled.
--8<--

Currently the timer is rearmed with new random expiration time for
every incoming query regardless of possibly already pending report.
Which is not aligned with the above RFE.
It also might happen that higher rate of incoming queries can
postpone the report after the expiration time of the first query
causing group membership loss.

Now the per interface general query timer is rearmed only
when there is no pending report already scheduled on that interface or
the newly selected expiration time is before the already pending
scheduled report.

Signed-off-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drop_monitor: consider inserted data in genlmsg_end

[ Upstream commit 3b48ab2248e61408910e792fe84d6ec466084c1a ]

Final nlmsg_len field update must reflect inserted net_dm_drop_point
data.

This patch depends on previous patch:
"drop_monitor: add missing call to genlmsg_end"

Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drop_monitor: add missing call to genlmsg_end

[ Upstream commit 4200462d88f47f3759bdf4705f87e207b0f5b2e4 ]

Update nlmsg_len field with genlmsg_end to enable userspace processing
using nlmsg_next helper. Also adds error handling.

Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Avoid shadowing numa_node

[ Upstream commit d151d73dcc99de87c63bdefebcc4cb69de1cdc40 ]

Avoid using a local variable named numa_node to avoid shadowing a public
one.

Fixes: db058a186f98 ('net/mlx5_core: Set irq affinity hints')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Check FW limitations on log_max_qp before setting it

[ Upstream commit 883371c453b937f9eb581fb4915210865982736f ]

When setting HCA capabilities, set log_max_qp to be the minimum
between the selected profile's value and the HCA limitation.

Fixes: 938fe83c8dcb ('net/mlx5_core: New device capabilities...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fix race between stmmac_drv_probe and stmmac_open

[ Upstream commit 5701659004d68085182d2fd4199c79172165fa65 ]

There is currently a small window during which the network device registered by
stmmac can be made visible, yet all resources, including and clock and MDIO bus
have not had a chance to be set up, this can lead to the following error to
occur:

[  473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized):
                stmmac_dvr_probe: warning: cannot get CSR clock
[  473.919382] stmmaceth 0000:01:00.0: no reset control found
[  473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42
[  473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported
[  473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported
[  473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported
[  473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized):
                Enable RX Mitigation via HW Watchdog Timer
[  473.921395] libphy: PHY stmmac-1:00 not found
[  473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY
[  473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to
                PHY (error: -19)
[  473.959710] libphy: stmmac: probed
[  473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL
                (stmmac-1:00) active
[  473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL
                (stmmac-1:01)
[  473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL
                (stmmac-1:02)
[  473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL
                (stmmac-1:03)

Fix this by making sure that register_netdev() is the last thing being done,
which guarantees that the clock and the MDIO bus are available.

Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove")
Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, sched: fix soft lockup in tc_classify

[ Upstream commit 628185cfddf1dfb701c4efe2cfd72cf5b09f5702 ]

Shahar reported a soft lockup in tc_classify(), where we run into an
endless loop when walking the classifier chain due to tp->next == tp
which is a state we should never run into. The issue only seems to
trigger under load in the tc control path.

What happens is that in tc_ctl_tfilter(), thread A allocates a new
tp, initializes it, sets tp_created to 1, and calls into tp->ops->change()
with it. In that classifier callback we had to unlock/lock the rtnl
mutex and returned with -EAGAIN. One reason why we need to drop there
is, for example, that we need to request an action module to be loaded.

This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning
after we loaded and found the requested action, we need to redo the
whole request so we don't race against others. While we had to unlock
rtnl in that time, thread B's request was processed next on that CPU.
Thread B added a new tp instance successfully to the classifier chain.
When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN
and destroying its tp instance which never got linked, we goto replay
and redo A's request.

This time when walking the classifier chain in tc_ctl_tfilter() for
checking for existing tp instances we had a priority match and found
the tp instance that was created and linked by thread B. Now calling
again into tp->ops->change() with that tp was successful and returned
without error.

tp_created was never cleared in the second round, thus kernel thinks
that we need to link it into the classifier chain (once again). tp and
*back point to the same object due to the match we had earlier on. Thus
for thread B's already public tp, we reset tp->next to tp itself and
link it into the chain, which eventually causes the mentioned endless
loop in tc_classify() once a packet hits the data path.

Fix is to clear tp_created at the beginning of each request, also when
we replay it. On the paths that can cause -EAGAIN we already destroy
the original tp instance we had and on replay we really need to start
from scratch. It seems that this issue was first introduced in commit
12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining
and avoid kernel panic when we use cls_cgroup").

Fixes: 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup")
Reported-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Tested-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: handle -EFAULT from skb_copy_bits

[ Upstream commit a98f91758995cb59611e61318dddd8a6956b52c3 ]

By setting certain socket options on ipv6 raw sockets, we can confuse the
length calculation in rawv6_push_pending_frames triggering a BUG_ON.

RIP: 0010:[<ffffffff817c6390>] [<ffffffff817c6390>] rawv6_sendmsg+0xc30/0xc40
RSP: 0018:ffff881f6c4a7c18  EFLAGS: 00010282
RAX: 00000000fffffff2 RBX: ffff881f6c681680 RCX: 0000000000000002
RDX: ffff881f6c4a7cf8 RSI: 0000000000000030 RDI: ffff881fed0f6a00
RBP: ffff881f6c4a7da8 R08: 0000000000000000 R09: 0000000000000009
R10: ffff881fed0f6a00 R11: 0000000000000009 R12: 0000000000000030
R13: ffff881fed0f6a00 R14: ffff881fee39ba00 R15: ffff881fefa93a80

Call Trace:
 [<ffffffff8118ba23>] ? unmap_page_range+0x693/0x830
 [<ffffffff81772697>] inet_sendmsg+0x67/0xa0
 [<ffffffff816d93f8>] sock_sendmsg+0x38/0x50
 [<ffffffff816d982f>] SYSC_sendto+0xef/0x170
 [<ffffffff816da27e>] SyS_sendto+0xe/0x10
 [<ffffffff81002910>] do_syscall_64+0x50/0xa0
 [<ffffffff817f7cbc>] entry_SYSCALL64_slow_path+0x25/0x25

Handle by jumping to the failure path if skb_copy_bits gets an EFAULT.

Reproducer:

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>

#define LEN 504

int main(int argc, char* argv[])
{
int fd;
int zero = 0;
char buf[LEN];

memset(buf, 0, LEN);

fd = socket(AF_INET6, SOCK_RAW, 7);

setsockopt(fd, SOL_IPV6, IPV6_CHECKSUM, &zero, 4);
setsockopt(fd, SOL_IPV6, IPV6_DSTOPTS, &buf, LEN);

sendto(fd, buf, 1, 0, (struct sockaddr *) buf, 110);
}

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: vrf: Drop conntrack data after pass through VRF device on Tx

[ Upstream commit eb63ecc1706b3e094d0f57438b6c2067cfc299f2 ]

Locally originated traffic in a VRF fails in the presence of a POSTROUTING
rule. For example,

    $ iptables -t nat -A POSTROUTING -s 11.1.1.0/24  -j MASQUERADE
    $ ping -I red -c1 11.1.1.3
    ping: Warning: source address might be selected on device other than red.
    PING 11.1.1.3 (11.1.1.3) from 11.1.1.2 red: 56(84) bytes of data.
    ping: sendmsg: Operation not permitted

Worse, the above causes random corruption resulting in a panic in random
places (I have not seen a consistent backtrace).

Call nf_reset to drop the conntrack info following the pass through the
VRF device.  The nf_reset is needed on Tx but not Rx because of the order
in which NF_HOOK's are hit: on Rx the VRF device is after the real ingress
device and on Tx it is is before the real egress device. Connection
tracking should be tied to the real egress device and not the VRF device.

Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ser_gigaset: return -ENOMEM on error instead of success

[ Upstream commit 93a97c50cbf1c007caf12db5cc23e0d5b9c8473c ]

If we can't allocate the resources in gigaset_initdriver() then we
should return -ENOMEM instead of zero.

Fixes: 2869b23e4b95 ("[PATCH] drivers/isdn/gigaset: new M101 driver (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netvsc: reduce maximum GSO size

[ Upstream commit a50af86dd49ee1851d1ccf06dd0019c05b95e297 ]

Hyper-V (and Azure) support using NVGRE which requires some extra space
for encapsulation headers. Because of this the largest allowed TSO
packet is reduced.

For older releases, hard code a fixed reduced value.  For next release,
there is a better solution which uses result of host offload
negotiation.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.42

usb: gadget: composite: always set ep->mult to a sensible value

commit eaa496ffaaf19591fe471a36cef366146eeb9153 upstream.

ep->mult is supposed to be set to Isochronous and
Interrupt Endapoint's multiplier value. This value
is computed from different places depending on the
link speed.

If we're dealing with HighSpeed, then it's part of
bits [12:11] of wMaxPacketSize. This case wasn't
taken into consideration before.

While at that, also make sure the ep->mult defaults
to one so drivers can use it unconditionally and
assume they'll never multiply ep->maxpacket to zero.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: composite: always set ep->mult to a sensible value"

This reverts commit c53af76d5de1af844a71e673ae4a02f1786c1b9c which is
commit eaa496ffaaf19591fe471a36cef366146eeb9153 upstream as it was
incorrect.

Reported-by: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick/broadcast: Prevent NULL pointer dereference

commit c1a9eeb938b5433947e5ea22f89baff3182e7075 upstream.

When a disfunctional timer, e.g. dummy timer, is installed, the tick core
tries to setup the broadcast timer.

If no broadcast device is installed, the kernel crashes with a NULL pointer
dereference in tick_broadcast_setup_oneshot() because the function has no
sanity check.

Reported-by: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Richard Cochran <rcochran@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Sebastian Frias <sf84@laposte.net>
Cc: Thibaud Cornic <thibaud_cornic@sigmadesigns.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: http://lkml.kernel.org/r/1147ef90-7877-e4d2-bb2b-5c4fa8d3144b@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Always store CRTC relative radeon_crtc->cursor_x/y values

commit 4349bd775cc8fd75cb648e3a2036a690f497de5c upstream.

We were storing viewport relative coordinates for AVIVO/DCE display
engines. However, radeon_crtc_cursor_set2 and radeon_cursor_reset pass
radeon_crtc->cursor_x/y as the x/y parameters of
radeon_cursor_move_locked, which would break if the CRTC isn't located
at (0, 0).

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cx23885-dvb: move initialization of a8293_pdata

commit f0b0faff78c2c2e8efe843de55405a1f0470b8c4 upstream.

Smatch complains about where the au8293_data is placed:

drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code).

It is not actually expected to have such initialization at

switch {
foo = bar;

case:
...
}

Not really sure how gcc does that, but this is something that I would
expect that different compilers would do different things.

David Howells checked with the compiler people: it's not really expected to
initialise as expected.

So, move the initialization outside the switch(), making smatch to
shut up one warning.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: vxge: avoid unused function warnings

commit 57e7c8cef224af166b8ec932b5e383641418c005 upstream.

When CONFIG_PCI_MSI is disabled, we get warnings about unused functions
in the vxge driver:

drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]

We could add another #ifdef here, but it's nicer to avoid those warnings
for good by converting the existing #ifdef to if(IS_ENABLED()), which has
the same effect but provides better compile-time coverage in general,
and lets the compiler understand better when the function is intentionally
unused.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ti: cpmac: Fix compiler warning due to type confusion

commit 2f5281ba2a8feaf6f0aee93356f350855bb530fc upstream.

cpmac_start_xmit() used the max() macro on skb->len (an unsigned int)
and ETH_ZLEN (a signed int literal). This led to the following compiler
warning:

  In file included from include/linux/list.h:8:0,
                   from include/linux/module.h:9,
                   from drivers/net/ethernet/ti/cpmac.c:19:
  drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit':
  include/linux/kernel.h:748:17: warning: comparison of distinct pointer
  types lacks a cast
    (void) (&_max1 == &_max2);  \
                   ^
  drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max'
    len = max(skb->len, ETH_ZLEN);
          ^

On top of this, it assigned the result of the max() macro to a signed
integer whilst all further uses of it result in it being cast to varying
widths of unsigned integer.

Fix this up by using max_t to ensure the comparison is performed as
unsigned integers, and for consistency change the type of the len
variable to unsigned int.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cred/userns: define current_user_ns() as a function

commit 0335695dfa4df01edff5bb102b9a82a0668ee51e upstream.

The current_user_ns() macro currently returns &init_user_ns when user
namespaces are disabled, and that causes several warnings when building
with gcc-6.0 in code that compares the result of the macro to
&init_user_ns itself:

  fs/xfs/xfs_ioctl.c: In function 'xfs_ioctl_setattr_check_projid':
  fs/xfs/xfs_ioctl.c:1249:22: error: self-comparison always evaluates to true [-Werror=tautological-compare]
    if (current_user_ns() == &init_user_ns)

This is a legitimate warning in principle, but here it isn't really
helpful, so I'm reprasing the definition in a way that shuts up the
warning.  Apparently gcc only warns when comparing identical literals,
but it can figure out that the result of an inline function can be
identical to a constant expression in order to optimize a condition yet
not warn about the fact that the condition is known at compile time.
This is exactly what we want here, and it looks reasonable because we
generally prefer inline functions over macros anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: tidy up register bit defines

commit f6b1160eb27f990cc1c48b67a5f83cb63115284e upstream.

Arnd Bergmann pointed out that gcc-6 warns about passing negative signed
integer into swab16() due to the macro expansion of 'outw'.

It appears that the register map constants are causing the warnings.
Actually, it might just be the (1 << 15) ones...

Convert all the constants as suggested by checkpatch.pl:
CHECK: Prefer using the BIT macro

The BIT() macro will make all the constants explicitly 'unsigned', which
helps to avoid the warning.

Fix the, unsused, DT2821_CHANCSR_PRESLA() macro. The "Present List
Address" (PRESLA) bits in the CHANCSR register are read only. This
define was meant to extract the bits from the read value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pci/rpadlpar: Fix device reference leaks

commit 99e5cde5eae78bef95bfe7c16ccda87fb070149b upstream.

Make sure to drop any device reference taken by vio_find_node() when
adding and removing virtual I/O slots.

Fixes: 5eeb8c63a38f ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: MD_RECOVERY_NEEDED is set for mddev->recovery

commit 82a301cb0ea2df8a5c88213094a01660067c7fb4 upstream.

Fixes: 90f5f7ad4f38("md: Wait for md_check_recovery before attempting device
removal.")

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/aes-ce - fix for big endian

commit 1803b9a52c4e5a5dbb8a27126f6bc06939359753 upstream.

The core AES cipher implementation that uses ARMv8 Crypto Extensions
instructions erroneously loads the round keys as 64-bit quantities,
which causes the algorithm to fail when built for big endian. In
addition, the key schedule generation routine fails to take endianness
into account as well, when loading the combining the input key with
the round constants. So fix both issues.

Fixes: 12ac3efe74f8 ("arm64/crypto: use crypto instructions to generate AES key schedule")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/aes-xts-ce: fix for big endian

commit caf4b9e2b326cc2a5005a5c557274306536ace61 upstream.

Emit the XTS tweak literal constants in the appropriate order for a
single 128-bit scalar literal load.

Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/sha1-ce - fix for big endian

commit ee71e5f1e7d25543ee63a80451871f8985b8d431 upstream.

The SHA1 digest is an array of 5 32-bit quantities, so we should refer
to them as such in order for this code to work correctly when built for
big endian. So replace 16 byte scalar loads and stores with 4x4 vector
ones where appropriate.

Fixes: 2c98833a42cd ("arm64/crypto: SHA-1 using ARMv8 Crypto Extensions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/aes-neon - fix for big endian

commit a2c435cc99862fd3d165e1b66bf48ac72c839c62 upstream.

The AES implementation using pure NEON instructions relies on the generic
AES key schedule generation routines, which store the round keys as arrays
of 32-bit quantities stored in memory using native endianness. This means
we should refer to these round keys using 4x4 loads rather than 16x1 loads.
In addition, the ShiftRows tables are loading using a single scalar load,
which is also affected by endianness, so emit these tables in the correct
order depending on whether we are building for big endian or not.

Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/aes-ccm-ce: fix for big endian

commit 56e4e76c68fcb51547b5299e5b66a135935ff414 upstream.

The AES-CCM implementation that uses ARMv8 Crypto Extensions instructions
refers to the AES round keys as pairs of 64-bit quantities, which causes
failures when building the code for big endian. In addition, it byte swaps
the input counter unconditionally, while this is only required for little
endian builds. So fix both issues.

Fixes: 12ac3efe74f8 ("arm64/crypto: use crypto instructions to generate AES key schedule")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm/aes-ce - fix for big endian

commit 58010fa6f71c9577922b22e46014b95a4ec80fa0 upstream.

The AES key schedule generation is mostly endian agnostic, with the
exception of the rotation and the incorporation of the round constant
at the start of each round. So implement a big endian specific version
of that part to make the whole routine big endian compatible.

Fixes: 86464859cc77 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/ghash-ce - fix for big endian

commit 9c433ad5083fd4a4a3c721d86cbfbd0b2a2326a5 upstream.

The GHASH key and digest are both pairs of 64-bit quantities, but the
GHASH code does not always refer to them as such, causing failures when
built for big endian. So replace the 16x1 loads and stores with 2x8 ones.

Fixes: b913a6404ce2 ("arm64/crypto: improve performance of GHASH algorithm")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm64/sha2-ce - fix for big endian

commit 174122c39c369ed924d2608fc0be0171997ce800 upstream.

The SHA256 digest is an array of 8 32-bit quantities, so we should refer
to them as such in order for this code to work correctly when built for
big endian. So replace 16 byte scalar loads and stores with 4x32 vector
ones where appropriate.

Fixes: 6ba6c74dfc6b ("arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/crypto: unlock on error in prng_tdes_read()

commit 9e6e7c74315095fd40f41003850690c711e44420 upstream.

We added some new locking but forgot to unlock on error.

Fixes: 57127645d79d ("s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmc_test: Uninitialized return value

commit 16652a936e96f5dae53c3fbd38a570497baadaa8 upstream.

We never set "ret" to RESULT_OK.

Fixes: 9f9c4180f88d ("mmc: mmc_test: add test for non-blocking transfers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend

commit bed570307ed78f21b77cb04a1df781dee4a8f05a upstream.

I noticed some wakeirq flakeyness with consumer drivers not using
autosuspend. For drivers not using autosuspend, the wakeirq may never
get unmasked in rpm_suspend() because of irq desc->depth.

We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we
naturally don't want them running until rpm_suspend() is called.

However, when a consumer driver initially calls pm_runtime_get(), we
now wrongly start with disable_irq_nosync() call on the dedicated
wakeirq that is disabled to start with.

This causes desc->depth to toggle between 1 and 2 instead of the usual
0 and 1. This can prevent enable_irq() from unmasking the wakeirq as
that only happens at desc->depth 1.

This does not necessarily show up with drivers using autosuspend as
there is time for disable_irq_nosync() before rpm_suspend() gets called
after the autosuspend timeout.

Let's fix the issue by adding wirq->status that lazily gets set on
the first rpm_suspend(). We also need PM runtime core private functions
for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check()
so we can enable the dedicated wakeirq on the first rpm_suspend().

While at it, let's also fix the comments for dev_pm_enable_wake_irq()
and dev_pm_disable_wake_irq(). Those can still be used by the consumer
drivers as needed because the IRQ core manages the interrupt usecount
for us.

Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling)
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/bcm7038-l1: Implement irq_cpu_offline() callback

commit 34c535793bcbf9263cf22f8a52101f796cdfab8e upstream.

We did not implement an irq_cpu_offline callback for our irqchip, yet we
support setting a given IRQ's affinity. This resulted in interrupts
whose affinity mask included CPUs being taken offline not to work
correctly once the CPU had been put offline.

Fixes: 5f7f0317ed28 ("IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: cernekee@gmail.com
Cc: jaedon.shin@gmail.com
Cc: ralf@linux-mips.org
Cc: justinpopo6@gmail.com
Link: http://lkml.kernel.org/r/1477948656-12966-2-git-send-email-f.fainelli@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/iscsi: Fix double free in lio_target_tiqn_addtpg()

commit a91918cd3ea11f91c68e08e1e8ce1b560447a80e upstream.

This iscsit_tpg_add_portal_group() function is only called from
lio_target_tiqn_addtpg().  Both functions free the "tpg" pointer on
error so it's a double free bug.  The memory is allocated in the caller
so it should be freed in the caller and not here.

Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
[ bvanassche: Added "Fix" at start of patch title ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mvsas: fix command_active typo

commit af15769ffab13d777e55fdef09d0762bf0c249c4 upstream.

gcc-7 notices that the condition in mvs_94xx_command_active looks
suspicious:

drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_command_active':
drivers/scsi/mvsas/mv_94xx.c:671:15: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context]

This was introduced when the mv_printk() statement got added, and leads
to the condition being ignored. This is probably harmless.

Changing '&&' to '&' makes the code look reasonable, as we check the
command bit before setting and printing it.

Fixes: a4632aae8b66 ("[SCSI] mvsas: Add new macros and functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: samsung: i2s: Fixup last IRQ unsafe spin lock call

commit 5faf071d08ddd1c1be66deaa93a09ccf43f5b538 upstream.

Unfortunately, I seem to have missed a case where an IRQ safe spinlock was
required, in samsung_i2s_dai_remove, when I fixed up the other calls in
this patch:

316fa9e09ad7 ("ASoC: samsung: Use IRQ safe spin lock calls")

This causes a lockdep warning when unbinding and rebinding the audio card:

[  104.357664]        CPU0                    CPU1
[  104.362174]        ----                    ----
[  104.366692]   lock(&(&pri_dai->spinlock)->rlock);
[  104.371372]                                local_irq_disable();
[  104.377283]                                lock(&(&substream->self_group.lock)->rlock);
[  104.385259]                                lock(&(&pri_dai->spinlock)->rlock);
[  104.392469]   <Interrupt>
[  104.395072]     lock(&(&substream->self_group.lock)->rlock);
[  104.400710]
[  104.400710]  *** DEADLOCK ***

Fixes: ce8bcdbb61d9 ("ASoC: samsung: i2s: Protect more registers with a spinlock")
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped

commit aec0e86172a79eb5e44aff1055bb953fe4d47c59 upstream.

We met the DMAR fault both on hpsa P420i and P421 SmartArray controllers
under kdump, it can be steadily reproduced on several different machines,
the dmesg log is like:
HP HPSA Driver (v 3.4.16-0)
hpsa 0000:02:00.0: using doorbell to reset controller
hpsa 0000:02:00.0: board ready after hard reset.
hpsa 0000:02:00.0: Waiting for controller to respond to no-op
DMAR: Setting identity map for device 0000:02:00.0 [0xe8000 - 0xe8fff]
DMAR: Setting identity map for device 0000:02:00.0 [0xf4000 - 0xf4fff]
DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6e000 - 0xbdf6efff]
DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6f000 - 0xbdf7efff]
DMAR: Setting identity map for device 0000:02:00.0 [0xbdf7f000 - 0xbdf82fff]
DMAR: Setting identity map for device 0000:02:00.0 [0xbdf83000 - 0xbdf84fff]
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read] Request device [02:00.0] fault addr fffff000 [fault reason 06] PTE Read access is not set
hpsa 0000:02:00.0: controller message 03:00 timed out
hpsa 0000:02:00.0: no-op failed; re-trying

After some debugging, we found that the fault addr is from DMA initiated at
the driver probe stage after reset(not in-flight DMA), and the corresponding
pte entry value is correct, the fault is likely due to the old iommu caches
of the in-flight DMA before it.

Thus we need to flush the old cache after context mapping is setup for the
device, where the device is supposed to finish reset at its driver probe
stage and no in-flight DMA exists hereafter.

I'm not sure if the hardware is responsible for invalidating all the related
caches allocated in the iommu hardware before, but seems not the case for hpsa,
actually many device drivers have problems in properly resetting the hardware.
Anyway flushing (again) by software in kdump kernel when the device gets context
mapped which is a quite infrequent operation does little harm.

With this patch, the problematic machine can survive the kdump tests.

CC: Myron Stowe <myron.stowe@gmail.com>
CC: Joseph Szczypek <jszczype@redhat.com>
CC: Don Brace <don.brace@microsemi.com>
CC: Baoquan He <bhe@redhat.com>
CC: Dave Young <dyoung@redhat.com>
Fixes: 091d42e43d21 ("iommu/vt-d: Copy translation tables from old kernel")
Fixes: dbcd861f252d ("iommu/vt-d: Do not re-use domain-ids from the old kernel")
Fixes: cf484d0e6939 ("iommu/vt-d: Mark copied context entries")
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix pasid table size encoding

commit 65ca7f5f7d1cdde6c25172fe6107cd16902f826f upstream.

Different encodings are used to represent supported PASID bits
and number of PASID table entries.
The current code assigns ecap_pss directly to extended context
table entry PTS which is wrong and could result in writing
non-zero bits to the reserved fields. IOMMU fault reason
11 will be reported when reserved bits are nonzero.
This patch converts ecap_pss to extend context entry pts encoding
based on VT-d spec. Chapter 9.4 as follows:
 - number of PASID bits = ecap_pss + 1
 - number of PASID table entries = 2^(pts + 5)
Software assigned limit of pasid_max value is also respected to
match the allocation limitation of PASID table.

cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Fixes: 2f26e0a9c9860 ('iommu/vt-d: Add basic SVM PASID support')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix the left value check of cmd buffer

commit 432abf68a79332282329286d190e21fe3ac02a31 upstream.

The generic command buffer entry is 128 bits (16 bytes), so the offset
of tail and head pointer should be 16 bytes aligned and increased with
0x10 per command.

When cmd buf is full, head = (tail + 0x10) % CMD_BUFFER_SIZE.

So when left space of cmd buf should be able to store only two
command, we should be issued one COMPLETE_WAIT additionally to wait
all older commands completed. Then the left space should be increased
after IOMMU fetching from cmd buf.

So left check value should be left <= 0x20 (two commands).

Signed-off-by: Huang Rui <ray.huang@amd.com>
Fixes: ac0ea6e92b222 ('x86/amd-iommu: Improve handling of full command buffer')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Missing error code in amd_iommu_init_device()

commit 24c790fbf5d8f54c8c82979db11edea8855b74bf upstream.

We should set "ret" to -EINVAL if iommu_group_get() fails.

Fixes: 55c99a4dc50f ("iommu/amd: Use iommu_attach_group()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx31: fix rewritten input argument of mx31_clocks_init()

commit bae203d58b7dce89664071b3fafe20cedaa3e4f6 upstream.

Function mx31_clocks_init() is called during clock intialization on
legacy boards with reference clock frequency passed as its input
argument, this can be verified by examination of the function
declaration found in arch/arm/mach-imx/common.h and actual function
users which include that header file.

Inside CCF driver the function ignores its input argument, by chance
the used value in the function body is the same as input arguments on
side of all callers.

Fixes: d9388c843237 ("clk: imx31: Do not call mxc_timer_init twice when booting with DT")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: clk-wm831x: fix a logic error

commit 20979202ee6e4c68dab7bcf408787225a656d18e upstream.

Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188561. Function
wm831x_clkout_is_prepared() returns "true" when it fails to read
CLOCK_CONTROL_1. "true" means the device is already prepared. So
return "true" on the read failure seems improper.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Fixes: f05259a6ffa4 ("clk: wm831x: Add initial WM831x clock driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (g762) Fix overflows and crash seen when writing limit attributes

commit 4fccd4a1e8944033bcd7693ea4e8fb478cd2059a upstream.

Fix overflows seen when writing into fan speed limit attributes.
Also fix crash due to division by zero, seen when certain very
large values (such as 2147483648, or 0x80000000) are written
into fan speed limit attributes.

Fixes: 594fbe713bf60 ("Add support for GMT G762/G763 PWM fan controllers")
Cc: Arnaud Ebalard <arno@natisbad.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct7802) Fix overflows seen when writing into limit attributes

commit c0d04e9112ad59d73f23f3b0f6726c5e798dfcbf upstream.

Fix overflows seen when writing voltage and temperature limit attributes.

The value passed to DIV_ROUND_CLOSEST() needs to be clamped, and the
value parameter passed to nct7802_write_fan_min() is an unsigned long.

Also, writing values larger than 2700000 into a fan limit attribute results
in writing 0 into the chip's limit registers. The exact behavior when
writing this value is unspecified. For consistency, report a limit of
1350000 if the chip register reads 0. This may be wrong, and the chip
behavior should be verified with the actual chip, but it is better than
reporting a value of 0 (which, when written, results in writing a value
of 0x1fff into the chip register).

Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ds620) Fix overflows seen when writing temperature limits

commit e36ce99ee0815d7919a7b589bfb66f3de50b6bc7 upstream.

Module test reports:

temp1_max: Suspected overflow: [160000 vs. 0]
temp1_min: Suspected overflow: [160000 vs. 0]

This is seen because the values passed when writing temperature limits
are unbound.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6099469805c2 ("hwmon: Support for Dallas Semiconductor DS620")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (amc6821) sign extension temperature

commit 4538bfbf2d9f1fc48c07ac0cc0ee58716fe7fe96 upstream.

Converts the unsigned temperature values from the i2c read
to be sign extended as defined in the datasheet so that
negative temperatures are properly read.

Fixes: 28e6274d8fa67 ("hwmon: (amc6821) Avoid forward declaration")
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[groeck: Dropped unnecessary continuation line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (scpi) Fix module autoload

commit 13edb767aa609b6efb7c0c2b57fbd72a6ded0eed upstream.

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias
$

After this patch:

$ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias
alias:          of:N*T*Carm,scpi-sensorsC*
alias:          of:N*T*Carm,scpi-sensors

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fixes: ea98b29a05e9c ("hwmon: Support sensors exported via ARM SCP interface")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected

commit 328cf6927bb72cadefddebbc9a23c793108147a2 upstream.

If CONFIG_ETRAX_AXISFLASHMAP is not configured, the flash rescue image
object file is empty. With recent versions of binutils, this results
in the following build error.

cris-linux-objcopy: error:
the input file 'arch/cris/boot/rescue/rescue.o' has no sections

This is seen, for example, when trying to build cris:allnoconfig
with recently generated toolchains.

Since it does not make sense to build a flash rescue image if there is
no flash, only build it if CONFIG_ETRAX_AXISFLASHMAP is enabled.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 66ab3a74c5ce ("CRIS: Merge machine dependent boot/compressed ..")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: use the right length of "background"

commit 31b239824ece321c09bdb8e61e1d14814eaba38b upstream.

The word "background" contains 10 characters so the third argument of
strncmp() need to be 10 in order to match this prefix correctly.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: 855aed1220d2 ("ath10k: add spectral scan feature")
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stable-fixup: hotplug: fix unused function warning

[resolves a messed up backport, so no matching upstream commit]

The backport of upstream commit 777c6e0daebb ("hotplug: Make
register and unregister notifier API symmetric") to linux-4.4.y
introduced a harmless warning in 'allnoconfig' builds as spotted by
kernelci.org:

kernel/cpu.c:226:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function]

So far, this is the only stable tree that is affected, as linux-4.6 and
higher contain commit 984581728eb4 ("cpu/hotplug: Split out cpu down functions")
that makes the function used in all configurations, while older longterm
releases so far don't seem to have a backport of 777c6e0daebb.

The fix for the warning is trivial: move the unused function back
into the #ifdef section where it was before.

Link: https://kernelci.org/build/id/586fcacb59b514049ef6c3aa/logs/
Fixes: 1c0f4e0ebb79 ("hotplug: Make register and unregister notifier API symmetric") in v4.4.y
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()

commit 19ec31230eb3084431bc2e565fd085f79f564274 upstream.

Let's call dwc3_ep0_prepare_one_trb() explicitly
because there are occasions where we will need more
than one TRB to handle an EP0 transfer.

A follow-up patch will fix one bug related to
multiple-TRB Data Phases when it comes to
mapping/unmapping requests for DMA.

Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()

commit 7931ec86c1b738e4e90e58c6d95e5f720d45ee56 upstream.

For now this is just a cleanup patch, no functional
changes. We will be using the new function to fix a
bug introduced long ago by commit 0416e494ce7d
("usb: dwc3: ep0: correct cache sync issue in case
of ep0_bounced") and further worsened by commit
c0bd5456a470 ("usb: dwc3: ep0: handle non maxpacket
aligned transfers > 512")

Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: always unmap EP0 requests

commit d62145929992f331fdde924d5963ab49588ccc7d upstream.

commit 0416e494ce7d ("usb: dwc3: ep0: correct cache
sync issue in case of ep0_bounced") introduced a bug
where we would leak DMA resources which would cause
us to starve the system of them resulting in failing
DMA transfers.

Fix the bug by making sure that we always unmap EP0
requests since those are *always* mapped.

Fixes: 0416e494ce7d ("usb: dwc3: ep0: correct cache
sync issue in case of ep0_bounced")
Cc: <stable@vger.kernel.org>
Tested-by: Tomasz Medrek <tomaszx.medrek@intel.com>
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad7606: fix improper setting of oversampling pins

commit b321a38d2407c7e425c54bc09be909a34e49f740 upstream.

The oversampling ratio is controlled using the oversampling pins,
OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control
bit.

The gpio connected to the OS2 pin is not being set correctly, only OS0
and OS1 pins are being set. Fix the typo to allow proper control of the
oversampling pins.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Fixes: b9618c0 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: fix mei_cldev_enable KDoc

commit 5026c9cb0744a9cd40242743ca91a5d712f468c6 upstream.

Adjust function name in KDoc.

Fixes: d49dc5e76fc9 (mei: bus: use mei_cldev_ prefix for the API functions)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: io_ti: bind to interface after fw download

commit e35d6d7c4e6532a89732cf4bace0e910ee684c88 upstream.

Bind to the interface, but do not register any ports, after having
downloaded the firmware. The device will still disconnect and
re-enumerate, but this way we avoid an error messages from being logged
as part of the process:

io_ti: probe of 1-1.3:1.0 failed with error -5

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: phy: am335x-control: fix device and of_node leaks

commit 015105b12183556771e111e93f5266851e7c5582 upstream.

Make sure to drop the references taken by of_parse_phandle() and
bus_find_device() before returning from am335x_get_phy_control().

Note that there is no guarantee that the devres-managed struct
phy_control will be valid for the lifetime of the sibling phy device
regardless of this change.

Fixes: 3bb869c8b3f1 ("usb: phy: Add AM335x PHY driver")
Acked-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7794: Correct hsusb parent clock

commit dc8ee9dbdba509fb58e23ba79f2e6059fe5d8b3b upstream.

The parent clock of the HSUSB clock is the HP clock, not the MP clock.

Fixes: c7bab9f929e51761 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: kl5kusb105: abort on open exception path

commit 3c3dd1e058cb01e835dcade4b54a6f13ffaeaf7c upstream.

Function klsi_105_open() calls usb_control_msg() (to "enable read") and
checks its return value. When the return value is unexpected, it only
assigns the error code to the return variable retval, but does not
terminate the exception path. This patch fixes the bug by inserting
"goto err_generic_close;" when the call to usb_control_msg() fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pan Bian <bianpan2016@163.com>
[johan: rebase on prerequisite fix and amend commit message]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>