ALSA: hda: add AMD Stoney PCI ID with proper driver caps

commit d716fb03f76411fc7e138692e33b749cada5c094 upstream.

This allows the device to correctly show up as ATI HDMI
rather than a generic one and allows the driver to use
the available caps.

Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - fix use-after-free after module unload

commit ab58d8cc870ef3f0771c197700441936898d1f1d upstream.

register_vga_switcheroo() sets the PM ops from the hda structure which
is freed later in azx_free. Make sure that these ops are cleared.

Caught by KASAN, initially noticed due to a general protection fault.

Fixes: 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)")
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ctl: Stop notification after disconnection

commit f388cdcdd160687c6650833f286b9c89c50960ff upstream.

snd_ctl_remove() has a notification for the removal event.  It's
superfluous when done during the device got disconnected.  Although
the notification itself is mostly harmless, it may potentially be
harmful, and should be suppressed.  Actually some components PCM may
free ctl elements during the disconnect or free callbacks, thus it's
no theoretical issue.

This patch adds the check of card->shutdown flag for avoiding
unnecessary notifications after (or during) the disconnect.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Free chmap at PCM free callback, too

commit a8ff48cb70835f48de5703052760312019afea55 upstream.

The chmap ctls assigned to PCM streams are freed in the PCM disconnect
callback.  However, since the disconnect callback isn't called when
the card gets freed before registering, the chmap ctls may still be
left assigned.  They are eventually freed together with other ctls,
but it may cause an Oops at pcm_chmap_ctl_private_free(), as the
function refers to the assigned PCM stream, while the PCM objects have
been already freed beforehand.

The fix is to free the chmap ctls also at PCM free callback, not only
at PCM disconnect.

Reported-by: Laxminath Kasam <b_lkasam@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - add new pin definition in alc225 pin quirk table

commit 8a132099f080d7384bb6ab4cc168f76cb4b47d08 upstream.

We have some Dell laptops which can't detect headset mic, the machines
use the codec ALC225, they have some new pin configuration values,
after adding them in the alc225 pin quirk table, they work well.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - fix read before array start

commit 81e43960dce1c8e58e682fb3ec26c1d8f83a9afc upstream.

UBSAN reports the following warning from accessing path->path[-1]
in set_path_power():

[   16.078040] ================================================================================
[   16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17
[   16.078198] index -1 is out of range for type 'hda_nid_t [10]'
[   16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47
[   16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012
[   16.078278]  ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032
[   16.078286]  ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d
[   16.078294]  ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292
[   16.078302] Call Trace:
[   16.078311]  [<ffffffff815c4fe3>] dump_stack+0x86/0xd3
[   16.078317]  [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40
[   16.078324]  [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70
[   16.078335]  [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic]
[   16.078344]  [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic]
[   16.078352]  [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic]
[   16.078360]  [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic]
[   16.078370]  [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic]
[   16.078376]  [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0
[   16.078390]  [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek]
[   16.078402]  [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek]
[   16.078417]  [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec]
[   16.078424]  [<ffffffff817bbac1>] driver_probe_device+0x101/0x380
[   16.078430]  [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100
[   16.078438]  [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380
[   16.078444]  [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0
[   16.078449]  [<ffffffff817bb087>] driver_attach+0x27/0x50
[   16.078454]  [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0
[   16.078460]  [<ffffffffa0369000>] ? 0xffffffffa0369000
[   16.078465]  [<ffffffff817bd13d>] driver_register+0x7d/0x130
[   16.078477]  [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec]
[   16.078488]  [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek]
[   16.078493]  [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0
[   16.078499]  [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80
[   16.078504]  [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560
[   16.078510]  [<ffffffff812bb314>] ? do_init_module+0x28/0x273
[   16.078515]  [<ffffffff812bb387>] do_init_module+0x9b/0x273
[   16.078522]  [<ffffffff811e3782>] load_module+0x20b2/0x3410
[   16.078527]  [<ffffffff811df140>] ? m_show+0x210/0x210
[   16.078533]  [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0
[   16.078541]  [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0
[   16.078547]  [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10
[   16.078552]  [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd
[   16.078556] ================================================================================

Fix by checking path->depth before use.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add PCI ID for Kabylake-H

commit 6858107e78b4ecb9f244db814ffbdba1b5ce759b upstream.

Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this
earlier with other KBL IDs.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup

commit 9cd25743765cfe851aed8d655a62d60156aed293 upstream.

This solves the issue that a headphone is not working on the docking
unit.

Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix negative queue usage by racy accesses

commit 3fa6993fef634e05d200d141a85df0b044572364 upstream.

The user timer tu->qused counter may go to a negative value when
multiple concurrent reads are performed since both the check and the
decrement of tu->qused are done in two individual locked contexts.
This results in bogus read outs, and the endless loop in the
user-space side.

The fix is to move the decrement of the tu->qused counter into the
same spinlock context as the zero-check of the counter.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: echoaudio: Fix memory allocation

commit 9c6795a9b3cbb56a9fbfaf43909c5c22999ba317 upstream.

'commpage_bak' is allocated with 'sizeof(struct echoaudio)' bytes.
We then copy 'sizeof(struct comm_page)' bytes in it.
On my system, smatch complains because one is 2960 and the other is 3072.

This would result in memory corruption or a oops.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift()

commit 62db7152c924e4c060e42b34a69cd39658e8a0dc upstream.

vortex_wtdma_bufshift() function does calculate the page index
wrongly, first masking then shift, which always results in zero.
The proper computation is to first shift, then mask.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup

commit 0f087ee3f3b86a4507db4ff1d2d5a3880e4cfd16 upstream.

  See: https://bugzilla.redhat.com/show_bug.cgi?id=1349539
  See: https://bugzilla.kernel.org/show_bug.cgi?id=120961

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix the headset mic jack detection on Dell machine

commit f83c32925d45926cd0e0f18bf28e6039116c4486 upstream.

The new Dell laptop with codec 3246 can't detect headset mic when
headset was inserted on the machine. So adding pin configurations
into quirk table makes headset mic work correctly.

Codec: Realtek ALC3246
Vendor Id: 0x10ec0256
Subsystem Id: 0x10280781

Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: dummy: Fix a use-after-free at closing

commit d5dbbe6569481bf12dcbe3e12cff72c5f78d272c upstream.

syzkaller fuzzer spotted a potential use-after-free case in snd-dummy
driver when hrtimer is used as backend:
> ==================================================================
> BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr ffff88005e5b6f68
>  Read of size 8 by task syz-executor/8984
> =============================================================================
> BUG kmalloc-192 (Not tainted): kasan: bad access detected
> -----------------------------------------------------------------------------
>
> Disabling lock debugging due to kernel taint
> INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=18446705582212484632
> ....
> [<      none      >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464
> ....
> INFO: Freed in 0xfffd8e09 age=18446705496313138713 cpu=2164287125 pid=-1
> [<      none      >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481
> ....
> Call Trace:
>  [<ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333
>  [<     inline     >] rb_set_parent include/linux/rbtree_augmented.h:111
>  [<     inline     >] __rb_erase_augmented include/linux/rbtree_augmented.h:218
>  [<ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427
>  [<ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86
>  [<ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903
>  [<     inline     >] remove_hrtimer kernel/time/hrtimer.c:945
>  [<ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046
>  [<ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066
>  [<ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417
>  [<ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507
>  [<ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106
>  [<ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956
>  [<ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974
>  [<     inline     >] snd_pcm_stop sound/core/pcm_native.c:1139
>  [<ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784
>  [<ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805
>  [<ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976
>  [<ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020
>  [<ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693
>  [<ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483
>  .....

A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which
is called certainly before other blocking ops.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Cache fan_type() calls and change fan detection

commit 5ce91714b0d8c0a3ff9b858966721f508351cf4c upstream.

On more Dell machines (e.g. Dell Precision M3800) fan_type() call is too
expensive (CPU is too long in SMM mode) and cause kernel to hang. This is
bug in Dell SMM or BIOS.

This patch caches type for each fan (as it should not change) and changes
the way how fan presense is detected. First it try function fan_status()
as was before commit f989e55452c7 ("i8k: Add support for fan labels"). And
if that fails fallback to fan_type(). *_status() functions can fail in case
fan is not currently accessible (e.g. present on GPU which is currently
turned off).

Reported-by: Tolga Cakir <cevelnet@gmail.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112021
Tested-by: Tolga Cakir <cevelnet@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Disallow fan_type() calls on broken machines

commit 2744d2fde00dc8bcc3679eb72c81a63058e90faa upstream.

Some Dell machines have especially broken SMM or BIOS which cause that once
fan_type() is called then CPU fan speed going randomly up and down. And for
fixing this behaviour reboot is required.

So this patch creates fan_type blacklist of affected Dell machines and
disallow fan_type() call on them to prevent that erratic behaviour.

Old blacklist which disabled loading driver on some machines added in
commits a4b45b25f18d ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100")
and 6220f4ebd7b4 ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8000") were
moved to FAN_TYPE blacklist.

Reported-by: Jan C Peters <jcpeters89@gmail.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100121
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default

commit 7613663cc186f8f3c50279390ddc60286758001c upstream.

For security reasons ordinary user must not be able to control fan speed
via /proc/i8k by default. Some malicious software running under "nobody"
user could be able to turn fan off and cause HW problems. So this patch
changes default value of "restricted" parameter to 1.

Also restrict reading of DMI_PRODUCT_SERIAL from /proc/i8k via "restricted"
parameter. It is because non root user cannot read DMI_PRODUCT_SERIAL from
sysfs file /sys/class/dmi/id/product_serial.

Old non secure behaviour of file /proc/i8k can be achieved by loading this
module with "restricted" parameter set to 0.

Note that this patch has effects only for kernels compiled with CONFIG_I8K
and only for file /proc/i8k. Hwmon interface provided by this driver was
not changed and root access for setting fan speed was needed also before.

Reported-by: Mario Limonciello <Mario_Limonciello@dell.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/vt/keyboard: fix OOB access in do_compute_shiftstate()

commit 510cccb5b0c8868a2b302a0ab524da7912da648b upstream.

The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS,
which is currently 256, whereas number of keys/buttons in input device (and
therefor in key_down) is much larger - KEY_CNT - 768, and that can cause
out-of-bound access when we do

sym = U(key_maps[0][k]);

with large 'k'.

To fix it we should not attempt iterating beyond smaller of NR_KEYS and
KEY_CNT.

Also while at it let's switch to for_each_set_bit() instead of open-coding
it.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: vt: Fix soft lockup in fbcon cursor blink timer.

commit 1b45996d2ebf9680ccd0db875fc668aa025f40fd upstream.

We are getting somewhat random soft lockups with this signature:

[   86.992215] [<fffffc00080935e0>] el1_irq+0xa0/0x10c
[   86.997082] [<fffffc000841822c>] cursor_timer_handler+0x30/0x54
[   87.002991] [<fffffc000810ec44>] call_timer_fn+0x54/0x1a8
[   87.008378] [<fffffc000810ef88>] run_timer_softirq+0x1c4/0x2bc
[   87.014200] [<fffffc000809077c>] __do_softirq+0x114/0x344
[   87.019590] [<fffffc00080af45c>] irq_exit+0x74/0x98
[   87.024458] [<fffffc00080fac20>] __handle_domain_irq+0x98/0xfc
[   87.030278] [<fffffc000809056c>] gic_handle_irq+0x94/0x190

This is caused by the vt visual_init() function calling into
fbcon_init() with a vc_cur_blink_ms value of zero.  This is a
transient condition, as it is later set to a non-zero value.  But, if
the timer happens to expire while the blink rate is zero, it goes into
an endless loop, and we get soft lockup.

The fix is to initialize vc_cur_blink_ms before calling the con_init()
function.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Scot Doyle <lkml14@scotdoyle.com>
Tested-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:ad7266: Fix probe deferral for vref

commit 68b356eb3d9f5e38910fb62e22a78e2a18d544ae upstream.

Currently the ad7266 driver treats any failure to get vref as though the
regulator were not present but this means that if probe deferral is
triggered the driver will act as though the regulator were not present.
Instead only use the internal reference if we explicitly got -ENODEV which
is what is returned for absent regulators.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:ad7266: Fix support for optional regulators

commit e5511c816e5ac4909bdd38e85ac344e2b9b8e984 upstream.

The ad7266 driver attempts to support deciding between the use of internal
and external power supplies by checking to see if an error is returned when
requesting the regulator. This doesn't work with the current code since the
driver uses a normal regulator_get() which is for non-optional supplies
and so assumes that if a regulator is not provided by the platform then
this is a bug in the platform integration and so substitutes a dummy
regulator. Use regulator_get_optional() instead which indicates to the
framework that the regulator may be absent and provides a dummy regulator
instead.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:ad7266: Fix broken regulator error handling

commit 6b7f4e25f3309f106a5c7ff42c8231494cf285d3 upstream.

All regulator_get() variants return either a pointer to a regulator or an
ERR_PTR() so testing for NULL makes no sense and may lead to bugs if we
use NULL as a valid regulator. Fix this by using IS_ERR() as expected.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: kxsd9: fix the usage of spi_w8r8()

commit 0c1f91b98552da49d9d8eed32b3132a58d2f4598 upstream.

These two spi_w8r8() calls return a value with is used by the code
following the error check. The dubious use was caused by a cleanup
patch.

Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: fix error check

commit ef3149eb3ddb7f9125e11c90f8330e371b55cffd upstream.

sca3000_read_ctrl_reg() returns a negative number on failure, check for
this instead of zero.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: hudmidity: hdc100x: fix incorrect shifting and scaling

commit 94bef000f1d4aa111f4ddda1482cf3b30ad069ce upstream.

Shifting sensor data to the right 2 bits was incorrect and caused the
scaling values + offsets to be invalid.

Reported-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Tested-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: humidity: hdc100x: fix IIO_TEMP channel reporting

commit 09bc0ddaab6cab0fa95a67d5535ec772e2671193 upstream.

IIO_TEMP channel was being incorrectly reported back as Celsius when it
should have been milliCelsius. This is via an incorrect scale value being
returned to userspace.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: humidity: hdc100x: correct humidity integration time mask

commit 0e35cf5ce00d873d6e529d2b2cd7598d52438051 upstream.

Apply the correct mask to enable all available humidity integration
times.  Currently, the driver defaults to 6500 and all is okay with that.
However, if 3850 is selected we get a stuck bit and can't change back
to 6500 or select 2500.  (Verified with HDC1008)

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: as3935: fix buffer stack trashing

commit 37b1ba2c68cfbe37f5f45bb91bcfaf2b016ae6a1 upstream.

Buffer wasn't of a valid size to allow the timestamp, and correct padding.
This patchset also moves the buffer off the stack, and onto the heap.

Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: as3935: remove triggered buffer processing

commit 7d0643634ea567969bf3f3ed6193a9d6fc75653b upstream.

Triggered buffers shouldn't return processed data, and the respective
conversion was overflowing the defined .realbits for the channel.

Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output

commit 5138806f16c74c7cb8ac3e408a859c79eb7c9567 upstream.

IIO_CHAN_INFO_RAW was returning processed data which was incorrect.
This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light apds9960: Add the missing dev.parent

commit 590b92a30242dd3f73de3d9a51d9924f1ab33e93 upstream.

Without this, the iio:deviceX is missing in the /sys/bus/i2c/devices/0-0039
Some userspace tools use this path to identify a specific instance of the
device.

Signed-off-by: Yong Li <sdliyong@gmail.com>
Reviewed-By: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:st_pressure: fix sampling gains (bring inline with ABI)

commit d43a41152f8e9e4c0d19850884d1fada076dee10 upstream.

Temperature channels report scaled samples in Celsius although expected as
milli degree Celsius in Documentation/ABI/testing/sysfs-bus-iio.
Gains are not implemented at all for LPS001WP pressure and temperature
channels.

This patch ensures that proper offsets and scales are exposed to userpace
for both pressure and temperature channels.
Also fix a NULL pointer exception when userspace reads content of sysfs
scale attribute when gains are not defined.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: Fix error handling in iio_trigger_attach_poll_func

commit 99543823357966ac938d9a310947e731b67338e6 upstream.

When attaching a pollfunc iio_trigger_attach_poll_func will allocate a
virtual irq and call the driver's set_trigger_state function. Fix error
handling to undo previous steps if any fails.

In particular this fixes handling errors from a driver's
set_trigger_state function. When using triggered buffers a failure to
enable the trigger used to make the buffer unusable.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: Fix declared-but-not-defined warning

commit 842775f1509054ea969f1787f38d6a0ec2ccfaba upstream.

Fix a declared-but-not-defined warning when building with
XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by
commit dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32
bit PAE").

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86: Fix undefined shift on 32-bit kernels

commit 6d6f2833bfbf296101f9f085e10488aef2601ba5 upstream.

Jim reported:

UBSAN: Undefined behaviour in arch/x86/events/intel/core.c:3708:12
shift exponent 35 is too large for 32-bit type 'long unsigned int'

The use of 'unsigned long' type obviously is not correct here, make it
'unsigned long long' instead.

Reported-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Imre Palik <imrep@amazon.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 2c33645d366d ("perf/x86: Honor the architectural performance monitoring version")
Link: http://lkml.kernel.org/r/1462974711-10037-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Christopher <kevinc@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing

commit 8f50b8e57442d28e41bb736c173d8a2490549a82 upstream.

In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY
is overwritten by the WEEXTRADELAY value from the device tree and
GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device
tree.

As a consequence, the memory accesses cannot be configured properly when
the extra delay are needed for OE and WE.

Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the
device tree file and prevents GPMC_CONFIG4_OEXTRADELAY
being overwritten by the WEXTRADELAY value from the device tree.

Signed-off-by: Ocquidant, Sebastien <sebastienocquidant@eaton.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix error paths when mapping framebuffer

commit 58541f7a6458e17ab417321b284f0090f530aa91 upstream.

Rather than returning immediately, make sure to unlock the
mutexes first.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set

commit d5f1a291e32309324a8c481ed84b5c118d1360ea upstream.

For the Screen Object display unit, we need to reserve a
guest-invisible region equal to the size of the framebuffer for
the host.  This region can only be reserved in VRAM, whereas
the guest-visible framebuffer can be reserved in either VRAM or
GMR.

As such priority should be given to the guest-invisible
region otherwise in a limited VRAM situation, we can fail to
allocate this region.

This patch makes it so that vmw_sou_backing_alloc() is called
before the framebuffer is pinned.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Check pin count before attempting to move a buffer

commit 4ed7e2242b637bc4af0416e4aa9f945db30fb44a upstream.

In certain scenarios, e.g. when fbdev is enabled, we can get into
a situation where a vmw_framebuffer_pin() is called on a buffer
that is already pinned.

When this happens, ttm_bo_validate() will unintentially remove the
TTM_PL_FLAG_NO_EVICT flag, thus unpinning it, and leaving no way
to actually pin the buffer again.

To prevent this, if a buffer is already pinned, then instead of
calling ttm_bo_validate(), just make sure the proposed placement is
compatible with the existing placement.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Work around mode set failure in 2D VMs

commit 7c20d213dd3cd6295bf9162730e7a368af957854 upstream.

In a low-memory 2D VM, fbdev can take up a large percentage of
available memory, making them unavailable for other DRM clients.

Since we do not take fbdev into account when filtering modes,
we end up claiming to support more modes than we actually do.

As a result, users get a black screen when setting a mode too
large for current available memory.  In a low-memory VM
configuration, users can get a black screen for a mode as low
as 1024x768.

The current mode filtering mechanism keys off of
SVGA_REG_SUGGESTED_GBOBJECT_MEM_SIZE_KB, i.e. the maximum amount
of surface memory we have.  Since this value is a performance
suggestion, not a hard limit, and since there should not be much
of a performance impact for a 2D VM, rather than filtering out
more modes, we will just allow ourselves to exceed the SVGA's
performance suggestion.

Also changed assumed bpp to 32 from 16 to make sure we can
actually support all the modes listed.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Add an option to change assumed FB bpp

commit 04319d89fbec72dfd60738003c3813b97c1d5f5a upstream.

Offer an option for advanced users who want larger modes at 16bpp.

This becomes necessary after the fix: "Work around mode set
failure in 2D VMs."  Without this patch, there would be no way
for existing advanced users to get to a high res mode, and the
regression is they will likely get a black screen after a software
update on their current VM.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Make ttm_bo_mem_compat available

commit 94477bff390aa4612d2332c8abafaae0a13d6923 upstream.

There are cases where it is desired to see if a proposed placement
is compatible with a buffer object before calling ttm_bo_validate().

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: atmel-hlcdc: actually disable scaling when no scaling is required

commit 1b7e38b92b0bbd363369f5160f13f4d26140972d upstream.

The driver is only enabling scaling, but never disabling it, thus, if you
enable the scaling feature once it stays enabled forever.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: make drm_atomic_set_mode_prop_for_crtc() more reliable

commit 6709887c448d1cff51b52d09763c7b834ea5f0be upstream.

drm_atomic_set_mode_prop_for_crtc() does not clear the state->mode, so
old data may be left there when a new mode is set, possibly causing odd
issues.

This patch improves the situation by always clearing the state->mode
first.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: add missing drm_mode_set_crtcinfo call

commit b201e743f42d143f4bcdcb14587caf7cb1d99229 upstream.

When setting mode via MODE_ID property,
drm_atomic_set_mode_prop_for_crtc() does not call
drm_mode_set_crtcinfo() which possibly causes:

"[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't
calculate constants, dotclock = 0!"

Whether the error is seen depends on the previous data in state->mode,
as state->mode is not cleared when setting new mode.

This patch adds drm_mode_set_crtcinfo() call to
drm_mode_convert_umode(), which is called in both legacy and atomic
paths. This should be fine as there's no reason to call
drm_mode_convert_umode() without also setting the crtc related fields.

drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as
that is no longer needed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency

commit a04e23d42a1ce5d5f421692bb1c7e9352832819d upstream.

Update CDCLK_FREQ on BDW after changing the cdclk frequency. Not sure
if this is a late addition to the spec, or if I simply overlooked this
step when writing the original code.

This is what Bspec has to say about CDCLK_FREQ:
"Program this field to the CD clock frequency minus one. This is used to
 generate a divided down clock for miscellaneous timers in display."

And the "Broadwell Sequences for Changing CD Clock Frequency" section
clarifies this further:
"For CD clock 337.5 MHz, program 337 decimal.
 For CD clock 450 MHz, program 449 decimal.
 For CD clock 540 MHz, program 539 decimal.
 For CD clock 675 MHz, program 674 decimal."

Cc: stable@vger.kernel.org
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: b432e5cfd5e9 ("drm/i915: BDW clock change support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461689194-6079-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit 7f1052a8fa38df635ab0dc0e6025b64ab9834824)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Update ifdeffery for mutex->owner

commit b19240062722c39fa92c99f04cbfd93034625123 upstream.

In commit 7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when
appropriate") the owner field in the mutex was updated from being
dependent upon CONFIG_SMP to using optimistic spin. Update our peek
function to suite.

Fixes:7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...")
Reported-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit 4f074a5393431a7d2cc0de7fcfe2f61d24854628)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Refresh cached DP port register value on resume

commit 664a84d2c77cbff2945ed7f96d08afbba42b6293 upstream.

During hibernation the cached DP port register value will be left with
whatever value we have there when we create the hibernation image.
Currently that means the port (and eDP PLL) will be off in the cached
value. However when we resume there is no guarantee that the value
in the actual register will match the cached value. If i915 isn't
loaded in the kernel that loads the hibernation image, the port may
well be on (eg. left on by the BIOS). The encoder state readout
does the right thing in this case and updates our encoder state
to reflect the actual hardware state. However the post-resume modeset
will then use the stale cached port register value in
intel_dp_link_down() and potentially confuse the hardware.

This was caught by the following assert
 WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915]
 eDP PLL state assertion failure (expected on, current off)
on account of the eDP PLL getting prematurely turned off when
shutting down the port, since the DP_PLL_ENABLE bit wasn't set
in the cached register value.

Presumably I introduced this problem in
commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
as before that we didn't update the cached value after shuttting the
port down. That's assuming the port got enabled at least once prior
to hibernating. If that didn't happen then the cached value would
still have been totally out of sync with reality (eg. first boot w/o
eDP on, then hibernate, and then resume with eDP on).

So, let's fix this properly and refresh the cached register value from
the hardware register during resume.

DDI platforms shouldn't use the cached value during port disable at
least, so shouldn't have this particular issue. They might still have
issues if we skip the initial modeset and then try to retrain the link
or something. But untangling this DP vs. DDI mess is a bigger topic,
so let's jut punt on DDI for now.

Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 64989ca4b27acb026b6496ec21e43bee66f86a5b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/ilk: Don't disable SSC source if it's in use

commit 476490a945e1f0f6bd58e303058d2d8ca93a974c upstream.

Thanks to Ville Syrjälä for pointing me towards the cause of this issue.

Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:

[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config]     FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config]     scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace 94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A

Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.

A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.

Changes since v4:
 - Fix calculation of final for systems with LVDS panels (fixes BUG() on
   CI test suite)
Changes since v3:
 - Move temp variable into loop
 - Move checks for using_ssc_source to after we've figured out has_ck505
 - Add using_ssc_source to debug output
Changes since v2:
 - Fix debug output for when we disable the CPU source
Changes since v1:
 - Leave the SSC source clock on instead of just shutting it off on all
   of the DPLL configurations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern

commit 217215041b9285af2193a755b56a8f3ed408bfe2 upstream.

Fixes a regression caused by a stupid thinko from "disp/sor/gf119: both
links use the same training register".

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: fix for disabled fbdev emulation

commit 52dfcc5ccfbb6697ac3cac7f7ff1e712760e1216 upstream.

Hello,

after this commit:

commit f045f459d925138fe7d6193a8c86406bda7e49da
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Thu Jun 2 12:23:31 2016 +1000
    drm/nouveau/fbcon: fix out-of-bounds memory accesses

kernel started to oops when loading nouveau module when using GTX 780 Ti
video adapter. This patch fixes the problem.

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591

Signed-off-by: Dmitrii Tcvetkov <demfloro@demfloro.ru>
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: f045f459d925 ("nouveau_fbcon_init()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/fbcon: fix out-of-bounds memory accesses

commit f045f459d925138fe7d6193a8c86406bda7e49da upstream.

Reported by KASAN.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers

commit 383d0a419f8e63e3d65e706c3c515fa9505ce364 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/disp/sor/gf119: both links use the same training register

commit a8953c52b95167b5d21a66f0859751570271d834 upstream.

It appears that, for whatever reason, both link A and B use the same
register to control the training pattern.  It's a little odd, as the
GPUs before this (Tesla/Fermi1) have per-link registers, as do newer
GPUs (Maxwell).

Fixes the third DP output on NVS 510 (GK107).

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: fix PFN format for virtio-1

commit 87c9403b0d1de4676b0bd273eea68fcf6de68e68 upstream.

Everything should be LE when using virtio-1, but
the linux balloon driver does not seem to care about that.

Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: Always clear proposed vcpi table for port.

commit fd2d2bac6e79b0be91ab86a6075a0c46ffda658a upstream.

Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch.

Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction")
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Cc: Mykola Lysenko <Mykola.Lysenko@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: destroy dbgmgr in notifier release

commit bc4755a4bd1845ef6e88ac8c62f12e05bb530256 upstream.

amdkfd need to destroy the debug manager in case amdkfd's notifier
function is called before the unbind function, because in that case,
the unbind function will exit without destroying debug manager.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: unbind only existing processes

commit 121b78e679ee3ffab780115e260b2775d0cc1f73 upstream.

When unbinding a process from a device (initiated by amd_iommu_v2), the
driver needs to make sure that process still exists in the process table.
There is a possibility that amdkfd's own notifier handler -
kfd_process_notifier_release() - was called before the unbind function
and it already removed the process from the process table.

v2:
Because there can be only one process with the specified pasid, and
because *p can't be NULL inside the hash_for_each_rcu macro, it is more
reasonable to just put the whole code inside the if statement that
compares the pasid value. That way, when we exit hash_for_each_rcu, we
simply exit the function as well.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: Make recover_peb power cut aware

commit 972228d87445dc46c0a01f5f3de673ac017626f7 upstream.

recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.

In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.

Reported-by: Jörg Pfähler <pfaehler@isse.de>
Reviewed-by: Jörg Pfähler <pfaehler@isse.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx7: fix broken condition check

commit 8b18300c13a1e08e152f6b6a430faac84f986231 upstream.

Wrong operator.

Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix asic initialization for virtualized environments

commit 05082b8bbd1a0ffc74235449c4b8930a8c240f85 upstream.

When executing in a PCI passthrough based virtuzliation environment, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.

Ported from amdgpu commit:
amdgpu: fix asic initialization for virtualized environments

Cc: Andres Rodriguez <andres.rodriguez@amd.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: account for non-CoW'd blocks in btrfs_abort_transaction

commit 64c12921e11b3a0c10d088606e328c58e29274d8 upstream.

The test for !trans->blocks_used in btrfs_abort_transaction is
insufficient to determine whether it's safe to drop the transaction
handle on the floor.  btrfs_cow_block, informed by should_cow_block,
can return blocks that have already been CoW'd in the current
transaction.  trans->blocks_used is only incremented for new block
allocations. If an operation overlaps the blocks in the current
transaction entirely and must abort the transaction, we'll happily
let it clean up the trans handle even though it may have modified
the blocks and will commit an incomplete operation.

In the long-term, I'd like to do closer tracking of when the fs
is actually modified so we can still recover as gracefully as possible,
but that approach will need some discussion.  In the short term,
since this is the only code using trans->blocks_used, let's just
switch it to a bool indicating whether any blocks were used and set
it when should_cow_block returns false.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: fix synchronization between synchronous map extension and chunk destruction

commit 6710e594f71ccaad8101bc64321152af7cd9ea28 upstream.

For non-atomic allocations, pcpu_alloc() can try to extend the area
map synchronously after dropping pcpu_lock; however, the extension
wasn't synchronized against chunk destruction and the chunk might get
freed while extension is in progress.

This patch fixes the bug by putting most of non-atomic allocations
under pcpu_alloc_mutex to synchronize against pcpu_balance_work which
is responsible for async chunk management including destruction.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Fixes: 1a4d76076cda ("percpu: implement asynchronous chunk population")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: fix synchronization between chunk->map_extend_work and chunk destruction

commit 4f996e234dad488e5d9ba0858bc1bae12eff82c3 upstream.

Atomic allocations can trigger async map extensions which is serviced
by chunk->map_extend_work.  pcpu_balance_work which is responsible for
destroying idle chunks wasn't synchronizing properly against
chunk->map_extend_work and may end up freeing the chunk while the work
item is still in flight.

This patch fixes the bug by rolling async map extension operations
into pcpu_balance_work.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Fixes: 9c824b6a172c ("percpu: make sure chunk->map array has available space")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_unix: fix hard linked sockets on overlay

commit eb0a4a47ae89aaa0674ab3180de6a162f3be2ddf upstream.

Overlayfs uses separate inodes even in the case of hard links on the
underlying filesystems.  This is a problem for AF_UNIX socket
implementation which indexes sockets based on the inode.  This resulted in
hard linked sockets not working.

The fix is to use the real, underlying inode.

Test case follows:

-- ovl-sock-test.c --
#include <unistd.h>
#include <err.h>
#include <sys/socket.h>
#include <sys/un.h>

#define SOCK "test-sock"
#define SOCK2 "test-sock2"

int main(void)
{
int fd, fd2;
struct sockaddr_un addr = {
.sun_family = AF_UNIX,
.sun_path = SOCK,
};
struct sockaddr_un addr2 = {
.sun_family = AF_UNIX,
.sun_path = SOCK2,
};

unlink(SOCK);
unlink(SOCK2);
if ((fd = socket(AF_UNIX, SOCK_STREAM, 0)) == -1)
err(1, "socket");
if (bind(fd, (struct sockaddr *) &addr, sizeof(addr)) == -1)
err(1, "bind");
if (listen(fd, 0) == -1)
err(1, "listen");
if (link(SOCK, SOCK2) == -1)
err(1, "link");
if ((fd2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1)
err(1, "socket");
if (connect(fd2, (struct sockaddr *) &addr2, sizeof(addr2)) == -1)
err (1, "connect");
return 0;
}
----

Reported-by: Alexander Morozov <alexandr.morozov@docker.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: add d_real_inode() helper

commit a118084432d642eeccb961c7c8cc61525a941fcb upstream.

Needed by the following fix.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Rework valid_user_regs

commit dbd4d7ca563fd0a8949718d35ce197e5642d5d9d upstream.

We validate pstate using PSR_MODE32_BIT, which is part of the
user-provided pstate (and cannot be trusted). Also, we conflate
validation of AArch32 and AArch64 pstate values, making the code
difficult to reason about.

Instead, validate the pstate value based on the associated task. The
task may or may not be current (e.g. when using ptrace), so this must be
passed explicitly by callers. To avoid circular header dependencies via
sched.h, is_compat_task is pulled out of asm/ptrace.h.

To make the code possible to reason about, the AArch64 and AArch32
validation is split into separate functions. Software must respect the
RES0 policy for SPSR bits, and thus the kernel mirrors the hardware
policy (RAZ/WI) for bits as-yet unallocated. When these acquire an
architected meaning writes may be permitted (potentially with additional
validation).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ rebased for v4.1+
  This avoids a user-triggerable Oops() if a task is switched to a mode
  not supported by the kernel (e.g. switching a 64-bit task to AArch32).
]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com> [backport]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()

commit ae4ea9a2460c7fee2ae8feeb4dfe96f5f6c3e562 upstream.

Commit 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for
SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg()
for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list.
That could lead to following list corruption problems:

1) low-level function treats smi_msg as not connected to list

  handle_one_recv_msg() could end up calling smi_send(), which
  assumes the msg is not connected to list.

  For example, the following sequence could corrupt list by
  doing list_add_tail() for the entry still connected to other list.

    handle_new_recv_msgs()
      msg = list_entry(waiting_rcv_msgs)
      handle_one_recv_msg(msg)
        handle_ipmb_get_msg_cmd(msg)
          smi_send(msg)
            spin_lock(xmit_msgs_lock)
            list_add_tail(msg)
            spin_unlock(xmit_msgs_lock)

2) race between multiple handle_new_recv_msgs() instances

  handle_new_recv_msgs() once releases waiting_rcv_msgs_lock before calling
  handle_one_recv_msg() then retakes the lock and list_del() it.

  If others call handle_new_recv_msgs() during the window shown below
  list_del() will be done twice for the same smi_msg.

  handle_new_recv_msgs()
    spin_lock(waiting_rcv_msgs_lock)
    msg = list_entry(waiting_rcv_msgs)
    spin_unlock(waiting_rcv_msgs_lock)
  |
  | handle_one_recv_msg(msg)
  |
    spin_lock(waiting_rcv_msgs_lock)
    list_del(msg)
    spin_unlock(waiting_rcv_msgs_lock)

Fixes: 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
[Added a comment to describe why this works.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Ye Feng <yefeng.yl@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: Black screen fix for G200e rev 4

commit d3922b69617b62bb2509936b68301f837229d9f0 upstream.

- Fixed black screen for some resolutions of G200e rev4
- Fixed testm & testn which had predetermined value.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix unity mapping initialization race

commit 522e5cb76d0663c88f96b6a8301451c8efa37207 upstream.

There is a race condition in the AMD IOMMU init code that
causes requested unity mappings to be blocked by the IOMMU
for a short period of time. This results on boot failures
and IO_PAGE_FAULTs on some machines.

Fix this by making sure the unity mappings are installed
before all other DMA is blocked.

Fixes: aafd8ba0ca74 ('iommu/amd: Implement add_device and remove_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Enable QI on all IOMMUs before setting root entry

commit a4c34ff1c029e90e7d5f8dd8d29b0a93b31c3cb2 upstream.

This seems to be required on some X58 chipsets on systems
with more than one IOMMU. QI does not work until it is
enabled on all IOMMUs in the system.

Reported-by: Dheeraj CVR <cvr.dheeraj@gmail.com>
Tested-by: Dheeraj CVR <cvr.dheeraj@gmail.com>
Fixes: 5f0a7f7614a9 ('iommu/vt-d: Make root entry visible for hardware right after allocation')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Wire up map_sg for arm-smmu-v3

commit 9aeb26cfc2abc96be42b9df2d0f2dc5d805084ff upstream.

The map_sg callback is missing from arm_smmu_ops, but is required by
iommu.h. Similarly to most other IOMMU drivers, connect it to
default_iommu_map_sg.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

base: make module_create_drivers_dir race-free

commit 7e1b1fc4dabd6ec8e28baa0708866e13fa93c9b3 upstream.

Modules which register drivers via standard path (driver_register) in
parallel can cause a warning:
WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
sysfs: cannot create duplicate filename '/module/saa7146/drivers'
Modules linked in: hexium_gemini(+) mxb(+) ...
...
Call Trace:
...
 [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80
 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90
 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340
 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0
 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70
 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0
 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280
 [<ffffffff815604c0>] driver_register+0x60/0xe0
 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70
 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146]
 [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini]
...

As can be (mostly) seen, driver_register causes this call sequence:
  -> bus_add_driver
    -> module_add_driver
      -> module_create_drivers_dir
The last one creates "drivers" directory in /sys/module/<...>. When
this is done in parallel, the directory is attempted to be created
twice at the same time.

This can be easily reproduced by loading mxb and hexium_gemini in
parallel:
while :; do
  modprobe mxb &
  modprobe hexium_gemini
  wait
  rmmod mxb hexium_gemini saa7146_vv saa7146
done

saa7146 calls pci_register_driver for both mxb and hexium_gemini,
which means /sys/module/saa7146/drivers is to be created for both of
them.

Fix this by a new mutex in module_create_drivers_dir which makes the
test-and-create "drivers" dir atomic.

I inverted the condition and removed 'return' to avoid multiple
unlocks or a goto.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: fe480a2675ed (Modules: only add drivers/ direcory if needed)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Handle NULL formats in hold_module_trace_bprintk_format()

commit 70c8217acd4383e069fe1898bbad36ea4fcdbdcc upstream.

If a task uses a non constant string for the format parameter in
trace_printk(), then the trace_printk_fmt variable is set to NULL. This
variable is then saved in the __trace_printk_fmt section.

The function hold_module_trace_bprintk_format() checks to see if duplicate
formats are used by modules, and reuses them if so (saves them to the list
if it is new). But this function calls lookup_format() that does a strcmp()
to the value (which is now NULL) and can cause a kernel oops.

This wasn't an issue till 3debb0a9ddb ("tracing: Fix trace_printk() to print
when not using bprintk()") which added "__used" to the trace_printk_fmt
variable, and before that, the kernel simply optimized it out (no NULL value
was saved).

The fix is simply to handle the NULL pointer in lookup_format() and have the
caller ignore the value if it was NULL.

Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.com
Reported-by: xingzhen <zhengjun.xing@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 3debb0a9ddb ("tracing: Fix trace_printk() to print when not using bprintk()")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multitouch: enable palm rejection for Windows Precision Touchpad

commit 6dd2e27a103d716921cc4a1a96a9adc0a8e3ab57 upstream.

The usage Confidence is mandary to Windows Precision Touchpad devices. If
it is examined in input_mapping on a WIndows Precision Touchpad, a new add
quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the
device. A touch with the confidence bit is not set is determined as
invalid.

Tested on Dell XPS13 9343

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org> # XPS 13 9350, BIOS 1.4.3
Signed-off-by: Allen Hung <allen_hung@dell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands

commit 93a2001bdfd5376c3dc2158653034c20392d15c5 upstream.

This patch validates the num_values parameter from userland during the
HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set
to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter
leading to a heap overflow.

Signed-off-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: elo: kill not flush the work

commit ed596a4a88bd161f868ccba078557ee7ede8a6ef upstream.

Flushing a work that reschedules itself is not a sensible operation. It needs
to be killed. Failure to do so leads to a kernel panic in the timer code.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode.

commit ff30ef40deca4658e27b0c596e7baf39115e858f upstream.

I couldn't get Xen to boot a L2 HVM when it was nested under KVM - it was
getting a GP(0) on a rather unspecial vmread from Xen:

     (XEN) ----[ Xen-4.7.0-rc  x86_64  debug=n  Not tainted ]----
     (XEN) CPU:    1
     (XEN) RIP:    e008:[<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450
     (XEN) RFLAGS: 0000000000010202   CONTEXT: hypervisor (d1v0)
     (XEN) rax: ffff82d0801e6288   rbx: ffff83003ffbfb7c   rcx: fffffffffffab928
     (XEN) rdx: 0000000000000000   rsi: 0000000000000000   rdi: ffff83000bdd0000
     (XEN) rbp: ffff83000bdd0000   rsp: ffff83003ffbfab0   r8:  ffff830038813910
     (XEN) r9:  ffff83003faf3958   r10: 0000000a3b9f7640   r11: ffff83003f82d418
     (XEN) r12: 0000000000000000   r13: ffff83003ffbffff   r14: 0000000000004802
     (XEN) r15: 0000000000000008   cr0: 0000000080050033   cr4: 00000000001526e0
     (XEN) cr3: 000000003fc79000   cr2: 0000000000000000
     (XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: 0000   cs: e008
     (XEN) Xen code around <ffff82d0801e629e> (vmx_get_segment_register+0x14e/0x450):
     (XEN)  00 00 41 be 02 48 00 00 <44> 0f 78 74 24 08 0f 86 38 56 00 00 b8 08 68 00
     (XEN) Xen stack trace from rsp=ffff83003ffbfab0:

     ...

     (XEN) Xen call trace:
     (XEN)    [<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450
     (XEN)    [<ffff82d0801f3695>] get_page_from_gfn_p2m+0x165/0x300
     (XEN)    [<ffff82d0801bfe32>] hvmemul_get_seg_reg+0x52/0x60
     (XEN)    [<ffff82d0801bfe93>] hvm_emulate_prepare+0x53/0x70
     (XEN)    [<ffff82d0801ccacb>] handle_mmio+0x2b/0xd0
     (XEN)    [<ffff82d0801be591>] emulate.c#_hvm_emulate_one+0x111/0x2c0
     (XEN)    [<ffff82d0801cd6a4>] handle_hvm_io_completion+0x274/0x2a0
     (XEN)    [<ffff82d0801f334a>] __get_gfn_type_access+0xfa/0x270
     (XEN)    [<ffff82d08012f3bb>] timer.c#add_entry+0x4b/0xb0
     (XEN)    [<ffff82d08012f80c>] timer.c#remove_entry+0x7c/0x90
     (XEN)    [<ffff82d0801c8433>] hvm_do_resume+0x23/0x140
     (XEN)    [<ffff82d0801e4fe7>] vmx_do_resume+0xa7/0x140
     (XEN)    [<ffff82d080164aeb>] context_switch+0x13b/0xe40
     (XEN)    [<ffff82d080128e6e>] schedule.c#schedule+0x22e/0x570
     (XEN)    [<ffff82d08012c0cc>] softirq.c#__do_softirq+0x5c/0x90
     (XEN)    [<ffff82d0801602c5>] domain.c#idle_loop+0x25/0x50
     (XEN)
     (XEN)
     (XEN) ****************************************
     (XEN) Panic on CPU 1:
     (XEN) GENERAL PROTECTION FAULT
     (XEN) [error_code=0000]
     (XEN) ****************************************

Tracing my host KVM showed it was the one injecting the GP(0) when
emulating the VMREAD and checking the destination segment permissions in
get_vmx_mem_address():

     3)               |    vmx_handle_exit() {
     3)               |      handle_vmread() {
     3)               |        nested_vmx_check_permission() {
     3)               |          vmx_get_segment() {
     3)   0.074 us    |            vmx_read_guest_seg_base();
     3)   0.065 us    |            vmx_read_guest_seg_selector();
     3)   0.066 us    |            vmx_read_guest_seg_ar();
     3)   1.636 us    |          }
     3)   0.058 us    |          vmx_get_rflags();
     3)   0.062 us    |          vmx_read_guest_seg_ar();
     3)   3.469 us    |        }
     3)               |        vmx_get_cs_db_l_bits() {
     3)   0.058 us    |          vmx_read_guest_seg_ar();
     3)   0.662 us    |        }
     3)               |        get_vmx_mem_address() {
     3)   0.068 us    |          vmx_cache_reg();
     3)               |          vmx_get_segment() {
     3)   0.074 us    |            vmx_read_guest_seg_base();
     3)   0.068 us    |            vmx_read_guest_seg_selector();
     3)   0.071 us    |            vmx_read_guest_seg_ar();
     3)   1.756 us    |          }
     3)               |          kvm_queue_exception_e() {
     3)   0.066 us    |            kvm_multiple_exception();
     3)   0.684 us    |          }
     3)   4.085 us    |        }
     3)   9.833 us    |      }
     3) + 10.366 us   |    }

Cross-checking the KVM/VMX VMREAD emulation code with the Intel Software
Developper Manual Volume 3C - "VMREAD - Read Field from Virtual-Machine
Control Structure", I found that we're enforcing that the destination
operand is NOT located in a read-only data segment or any code segment when
the L1 is in long mode - BUT that check should only happen when it is in
protected mode.

Shuffling the code a bit to make our emulation follow the specification
allows me to boot a Xen dom0 in a nested KVM and start HVM L2 guests
without problems.

Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions")
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Eugene Korenevsky <ekorenevsky@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES

commit caf1ff26e1aa178133df68ac3d40815fed2187d9 upstream.

These days, we experienced one guest crash with 8 cores and 3 disks,
with qemu error logs as bellow:

qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984:
kvm_irqchip_commit_routes: Assertion `ret == 0' failed.

And then we found one patch(bdf026317d) in qemu tree, which said
could fix this bug.

Execute the following script will reproduce the BUG quickly:

irq_affinity.sh
========================================================================

vda_irq_num=25
vdb_irq_num=27
while [ 1 ]
do
    for irq in {1,2,4,8,10,20,40,80}
        do
            echo $irq > /proc/irq/$vda_irq_num/smp_affinity
            echo $irq > /proc/irq/$vdb_irq_num/smp_affinity
            dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct
            dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct
        done
done
========================================================================

The following qemu log is added in the qemu code and is displayed when
this bug reproduced:

kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024,
irq_routes->nr: 1024, gsi_count: 1024.

That's to say when irq_routes->nr == 1024, there are 1024 routing entries,
but in the kernel code when routes->nr >= 1024, will just return -EINVAL;

The nr is the number of the routing entries which is in of
[1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1].

This patch fix the BUG above.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: potential uninitialized variable

commit 38327424b40bcebe2de92d07312c89360ac9229a upstream.

If __key_link_begin() failed then "edit" would be uninitialized.  I've
added a check to fix that.

This allows a random user to crash the kernel, though it's quite
difficult to achieve.  There are three ways it can be done as the user
would have to cause an error to occur in __key_link():

 (1) Cause the kernel to run out of memory.  In practice, this is difficult
     to achieve without ENOMEM cropping up elsewhere and aborting the
     attempt.

 (2) Revoke the destination keyring between the keyring ID being looked up
     and it being tested for revocation.  In practice, this is difficult to
     time correctly because the KEYCTL_REJECT function can only be used
     from the request-key upcall process.  Further, users can only make use
     of what's in /sbin/request-key.conf, though this does including a
     rejection debugging test - which means that the destination keyring
     has to be the caller's session keyring in practice.

 (3) Have just enough key quota available to create a key, a new session
     keyring for the upcall and a link in the session keyring, but not then
     sufficient quota to create a link in the nominated destination keyring
     so that it fails with EDQUOT.

The bug can be triggered using option (3) above using something like the
following:

echo 80 >/proc/sys/kernel/keys/root_maxbytes
keyctl request2 user debug:fred negate @t

The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system.  Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.

Assuming the failure occurs, something like the following will be seen:

kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h
------------[ cut here ]------------
kernel BUG at ../mm/slab.c:2821!
...
RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25
RSP: 0018:ffff8804014a7de8  EFLAGS: 00010092
RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000
RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202
R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001
...
Call Trace:
  kfree+0xde/0x1bc
  assoc_array_cancel_edit+0x1f/0x36
  __key_link_end+0x55/0x63
  key_reject_and_link+0x124/0x155
  keyctl_reject_key+0xb6/0xe0
  keyctl_negate_key+0x10/0x12
  SyS_keyctl+0x9f/0xe7
  do_syscall_64+0x63/0x13a
  entry_SYSCALL64_slow_path+0x25/0x25

Fixes: f70e2e06196a ('KEYS: Do preallocation for __key_link()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARCv2: LLSC: software backoff is NOT needed starting HS2.1c

commit b31ac42697bef4a3aa5d0aa42375a55657f57174 upstream.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARCv2: Check for LL-SC livelock only if LLSC is enabled

commit 4d0cb15fccd1db9dac0c964b2ccf10874e69f5b8 upstream.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix mem leak in rt6i_pcpu

[ Upstream commit 903ce4abdf374e3365d93bcb3df56c62008835ba ]

It was first reported and reproduced by Petr (thanks!) in
https://bugzilla.kernel.org/show_bug.cgi?id=119581

free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy().

However, after fixing a deadlock bug in
commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"),
free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL.

It is worth to note that rt6i_pcpu is protected by table->tb6_lock.

kmemleak somehow did not report it.  We nailed it down by
observing the pcpu entries in /proc/vmallocinfo (first suggested
by Hannes, thanks!).

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt")
Reported-by: Petr Novopashenniy <pety@rusnet.ru>
Tested-by: Petr Novopashenniy <pety@rusnet.ru>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Petr Novopashenniy <pety@rusnet.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc_ncm: workaround for EM7455 "silent" data interface

[ Upstream commit c086e7096170390594c425114d98172bc9aceb8a ]

Several Lenovo users have reported problems with their Sierra
Wireless EM7455 modem. The driver has loaded successfully and
the MBIM management channel has appeared to work, including
establishing a connection to the mobile network. But no frames
have been received over the data interface.

The problem affects all EM7455 and MC7455, and is assumed to
affect other modems based on the same Qualcomm chipset and
baseband firmware.

Testing narrowed the problem down to what seems to be a
firmware timing bug during initialization. Adding a short sleep
while probing is sufficient to make the problem disappear.
Experiments have shown that 1-2 ms is too little to have any
effect, while 10-20 ms is enough to reliably succeed.

Reported-by: Stefan Armbruster <ml001@armbruster-it.de>
Reported-by: Ralph Plawetzki <ralph@purejava.org>
Reported-by: Andreas Fett <andreas.fett@secunet.com>
Reported-by: Rasmus Lerdorf <rasmus@lerdorf.com>
Reported-by: Samo Ratnik <samo.ratnik@gmail.com>
Reported-and-tested-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: fix mirrored packets checksum

[ Upstream commit 82a31b9231f02d9c1b7b290a46999d517b0d312a ]

Similar to commit 9b368814b336 ("net: fix bridge multicast packet checksum validation")
we need to fixup the checksum for CHECKSUM_COMPLETE when
pushing skb on RX path. Otherwise we get similar splats.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: Use symmetric hash for PACKET_FANOUT_HASH.

[ Upstream commit eb70db8756717b90c01ccc765fdefc4dd969fc74 ]

People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that
they want packets going in both directions on a flow to hash to the
same bucket.

The core kernel SKB hash became non-symmetric when the ipv6 flow label
and other entities were incorporated into the standard flow hash order
to increase entropy.

But there are no users of PACKET_FANOUT_HASH who want an assymetric
hash, they all want a symmetric one.

Therefore, use the flow dissector to compute a flat symmetric hash
over only the protocol, addresses and ports.  This hash does not get
installed into and override the normal skb hash, so this change has
no effect whatsoever on the rest of the stack.

Reported-by: Eric Leblond <eric@regit.org>
Tested-by: Eric Leblond <eric@regit.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix cfs_rq avg tracking underflow

commit 8974189222159154c55f24ddad33e3613960521a upstream.

As per commit:

  b7fa30c9cc48 ("sched/fair: Fix post_init_entity_util_avg() serialization")

> the code generated from update_cfs_rq_load_avg():
>
>  if (atomic_long_read(&cfs_rq->removed_load_avg)) {
>  s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
>  sa->load_avg = max_t(long, sa->load_avg - r, 0);
>  sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
>  removed_load = 1;
>  }
>
> turns into:
>
> ffffffff81087064:       49 8b 85 98 00 00 00    mov    0x98(%r13),%rax
> ffffffff8108706b:       48 85 c0                test   %rax,%rax
> ffffffff8108706e:       74 40                   je     ffffffff810870b0 <update_blocked_averages+0xc0>
> ffffffff81087070:       4c 89 f8                mov    %r15,%rax
> ffffffff81087073:       49 87 85 98 00 00 00    xchg   %rax,0x98(%r13)
> ffffffff8108707a:       49 29 45 70             sub    %rax,0x70(%r13)
> ffffffff8108707e:       4c 89 f9                mov    %r15,%rcx
> ffffffff81087081:       bb 01 00 00 00          mov    $0x1,%ebx
> ffffffff81087086:       49 83 7d 70 00          cmpq   $0x0,0x70(%r13)
> ffffffff8108708b:       49 0f 49 4d 70          cmovns 0x70(%r13),%rcx
>
> Which you'll note ends up with sa->load_avg -= r in memory at
> ffffffff8108707a.

So I _should_ have looked at other unserialized users of ->load_avg,
but alas. Luckily nikbor reported a similar /0 from task_h_load() which
instantly triggered recollection of this here problem.

Aside from the intermediate value hitting memory and causing problems,
there's another problem: the underflow detection relies on the signed
bit. This reduces the effective width of the variables, IOW its
effectively the same as having these variables be of signed type.

This patch changes to a different means of unsigned underflow
detection to not rely on the signed bit. This allows the variables to
use the 'full' unsigned range. And it does so with explicit LOAD -
STORE to ensure any intermediate value will never be visible in
memory, allowing these unserialized loads.

Note: GCC generates crap code for this, might warrant a look later.

Note2: I say 'full' above, if we end up at U*_MAX we'll still explode;
       maybe we should do clamping on add too.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Du <yuyang.du@intel.com>
Cc: bsegall@google.com
Cc: kernel@kyup.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: steve.muckle@linaro.org
Fixes: 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking")
Link: http://lkml.kernel.org/r/20160617091948.GJ30927@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: Implement ->migratepage()

commit 4ac1c17b2044a1b4b2fbed74451947e905fc2992 upstream.

During page migrations UBIFS might get confused
and the following assert triggers:
[  213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436)
[  213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008
[  213.490000] Hardware name: Allwinner sun4i/sun5i Families
[  213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14)
[  213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0)
[  213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50)
[  213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8)
[  213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290)
[  213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80)
[  213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0)
[  213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4)
[  213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0)
[  213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8)
[  213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274)
[  213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c)
[  213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0)
[  213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8)
[  213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48)
[  213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444)
[  213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614)
[  213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c)
[  213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34)

UBIFS is using PagePrivate() which can have different meanings across
filesystems. Therefore the generic page migration code cannot handle this
case correctly.
We have to implement our own migration function which basically does a
plain copy but also duplicates the page private flag.
UBIFS is not a block device filesystem and cannot use buffer_migrate_page().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[rw: Massaged changelog, build fixes, etc...]
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Export migrate_page_move_mapping and migrate_page_copy

commit 1118dce773d84f39ebd51a9fe7261f9169cb056e upstream.

Export these symbols such that UBIFS can implement
->migratepage.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: KVM: Fix modular KVM under QEMU

commit 797179bc4fe06c89e47a9f36f886f68640b423f8 upstream.

Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never
get a TLB refill exception in it when KVM is built as a module.

This was observed to happen with the host MIPS kernel running under
QEMU, due to a not entirely transparent optimisation in the QEMU TLB
handling where TLB entries replaced with TLBWR are copied to a separate
part of the TLB array. Code in those pages continue to be executable,
but those mappings persist only until the next ASID switch, even if they
are marked global.

An ASID switch happens in __kvm_mips_vcpu_run() at exception level after
switching to the guest exception base. Subsequent TLB mapped kernel
instructions just prior to switching to the guest trigger a TLB refill
exception, which enters the guest exception handlers without updating
EPC. This appears as a guest triggered TLB refill on a host kernel
mapped (host KSeg2) address, which is not handled correctly as user
(guest) mode accesses to kernel (host) segments always generate address
error exceptions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8579/1: mm: Fix definition of pmd_mknotpresent

commit 56530f5d2ddc9b9fade7ef8db9cb886e9dc689b5 upstream.

Currently pmd_mknotpresent will use a zero entry to respresent an
invalidated pmd.

Unfortunately this definition clashes with pmd_none, thus it is
possible for a race condition to occur if zap_pmd_range sees pmd_none
whilst __split_huge_pmd_locked is running too with pmdp_invalidate
just called.

This patch fixes the race condition by modifying pmd_mknotpresent to
create non-zero faulting entries (as is done in other architectures),
removing the ambiguity with pmd_none.

[catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT]

Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.")
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8578/1: mm: ensure pmd_present only checks the valid bit

commit 624531886987f0f1b5d01fb598034d039198e090 upstream.

In a subsequent patch, pmd_mknotpresent will clear the valid bit of the
pmd entry, resulting in a not-present entry from the hardware's
perspective. Unfortunately, pmd_present simply checks for a non-zero pmd
value and will therefore continue to return true even after a
pmd_mknotpresent operation. Since pmd_mknotpresent is only used for
managing huge entries, this is only an issue for the 3-level case.

This patch fixes the 3-level pmd_present implementation to take into
account the valid bit. For bisectability, the change is made before the
fix to pmd_mknotpresent.

[catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch]

Fixes: 8d9625070073 ("ARM: mm: Transparent huge page support for LPAE systems.")
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steve Capper <Steve.Capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx6ul: Fix Micrel PHY mask

commit 20c15226d1c73150c4d9107301cac5dda0b7f995 upstream.

The value used for Micrel PHY mask is not correct. Use the
MICREL_PHY_ID_MASK definition instead.

Thanks to Jiri Luznicky for proposing the fix at
https://community.freescale.com/thread/387739

Fixes: 709bc0657fe6f9f55 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix another OPEN_DOWNGRADE bug

commit e547f2628327fec6afd2e03b46f113f614cca05b upstream.

Olga Kornievskaia reports that the following test fails to trigger
an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE.

fd0 = open(foo, RDRW)   -- should be open on the wire for "both"
fd1 = open(foo, RDONLY)  -- should be open on the wire for "read"
close(fd0) -- should trigger an open_downgrade
read(fd1)
close(fd1)

The issue is that we're missing a check for whether or not the current
state transitioned from an O_RDWR state as opposed to having transitioned
from a combination of O_RDONLY and O_WRONLY.

Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: cd9288ffaea4 ("NFSv4: Fix another bug in the close/open_downgrade code")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

make nfs_atomic_open() call d_drop() on all ->open_context() errors.

commit d20cb71dbf3487f24549ede1a8e2d67579b4632e upstream.

In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code"
unconditional d_drop() after the ->open_context() had been removed.  It had
been correct for success cases (there ->open_context() itself had been doing
dcache manipulations), but not for error ones.  Only one of those (ENOENT)
got a compensatory d_drop() added in that commit, but in fact it should've
been done for all errors.  As it is, the case of O_CREAT non-exclusive open
on a hashed negative dentry racing with e.g. symlink creation from another
client ended up with ->open_context() getting an error and proceeding to
call nfs_lookup().  On a hashed dentry, which would've instantly triggered
BUG_ON() in d_materialise_unique() (or, these days, its equivalent in
d_splice_alias()).

Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: check permissions when setting ACLs

commit 999653786df6954a31044528ac3f7a5dadca08f4 upstream.

Use set_posix_acl, which includes proper permission checks, instead of
calling ->set_acl directly.  Without this anyone may be able to grant
themselves permissions to a file by setting the ACL.

Lock the inode to make the new checks atomic with respect to set_acl.
(Also, nfsd was the only caller of set_acl not locking the inode, so I
suspect this may fix other races.)

This also simplifies the code, and ensures our ACLs are checked by
posix_acl_valid.

The permission checks and the inode locking were lost with commit
4ac7249e, which changed nfsd to use the set_acl inode operation directly
instead of going through xattr handlers.

Reported-by: David Sinquin <david@sinquin.eu>
[agreunba@redhat.com: use set_posix_acl]
Fixes: 4ac7249e
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix_acl: Add set_posix_acl

commit 485e71e8fb6356c08c7fc6bcce4bf02c9a9a663f upstream.

Factor out part of posix_acl_xattr_set into a common function that takes
a posix_acl, which nfsd can also call.

The prototype already exists in include/linux/posix_acl.h.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Extend the mutex holding region around in nfsd4_process_open2()

commit 5cc1fb2a093e254b656c64ff24b0b76bed1d34d9 upstream.

To avoid racing entry into nfs4_get_vfs_file().
Make init_open_stateid() return with locked stateid to be unlocked
by the caller.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Always lock state exclusively.

commit feb9dad5209280085d5b0c094fa67e7a8d75c81a upstream.

It used to be the case that state had an rwlock that was locked for write
by downgrades, but for read for upgrades (opens). Well, the problem is
if there are two competing opens for the same state, they step on
each other toes potentially leading to leaking file descriptors
from the state structure, since access mode is a bitmap only set once.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4/rpc: move backchannel create logic into rpc code

commit d50039ea5ee63c589b0434baa5ecf6e5075bb6f9 upstream.

Also simplify the logic a bit.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>