[PATCH] Framebuffer driver for Arc LCD board

Add support for the Arc monochrome LCD board.

The board uses KS108 controllers to drive individual 64x64 LCD matrices.
The board can be paneled in a variety of setups such as 2x1=128x64,
4x4=256x256 and so on.  The board/host interface is through GPIO.

Signed-off-by: Jaya Kumar <jayalk@intworks.biz>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <linux-fbdev-devel@lists.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] intelfb documentation

Add a small documentation of the driver parameters.

Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] intelfb: fix accel detection when changing video modes

Changed the tests in intelfb_set_par to check also the parameter
var.accel_flags.  If null, do nothing about ring buffers.

Now, the DirectFB i830 driver could nicely work even if intelfb is hw
accelerated.  Just change the /etc/fb.modes file to disable console hw
acceleration when starting a DirectFB app.

Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] intelfb: Add voffset option to avoid conficts with Xorg i810 driver

- Add voffset option to avoid conficts with Xorg i810 driver

Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] VGA to fbcon fix.

Currently when going from vgacon to fbcon the VT screenbuffer are often
different sizes.  In the case when they are different sizes a new VT
screenbuffer is allocated and the contents are copied into the new buffer.

Currently the amount copied from VGA text memory to the new screenbuf is
the size of the framebuffer console.  If the framebuffer console new VT
screen buffer is greater than the VGA text memory size then we get some of
the VGA BIOS contents as well.

This patch will only allow you to copy up to the size of VGA text memory
now.  The rest is filled with erase characters.

Initial patch by Jordan Crouse <jordan.crouse@amd.com>

Signed-off-by: James Simmons <jsimmons@www.infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pm3fb typo fix

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: iomove removal

Since no one is using the inbuf, outbuf of struct fb_pixmap I removed their
use in the framebuffer console.  The idea is instead move the pixmap
functionality below the accelerated functions intead of on top as the way
it is now.  If there is no objection please apply.  This is against Linus
latestr GIT tree.  Thank you.

Signed-off-by: James Simmons <jsimmons@www.infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] intelfbdrv naming fix

Can't use this fancy name, because it's used to generate a sysfs filename:

kobject_register failed for Intel(R) 830M/845G/852GM/855GM/865G/915G
 Framebuffer Driver (-13)
  [<c01bf8e3>] kobject_register+0x43/0x70
  [<c022dfe2>] bus_add_driver+0x52/0xa0
  [<c01c8c10>] pci_device_shutdown+0x0/0x20
  [<c01c8d71>] pci_register_driver+0x61/0x80
  [<c0387099>] intelfb_init+0x59/0x70
  [<c03787cc>] do_initcalls+0x2c/0xc0
  [<c0159025>] kern_mount+0x15/0x17
  [<c01002a0>] init+0x0/0x100
  [<c01002ca>] init+0x2a/0x100
  [<c0100f58>] kernel_thread_helper+0x0/0x18
  [<c0100f5d>] kernel_thread_helper+0x5/0x18

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] some vesafb fixes

Fix the size passed to release_mem_region in an error path.

Also adjust the message printed when vesafb cannot load; the comment there
already says this must not be fatal, so the message should also not mention
the word 'abort' otherwise indicating a problem to worry about in the log.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Gerd Knorr <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s1d13xxxfb linkage fix

s1d13xxxfb_remove() is referenced from s1d13xxxfb_probe(), which is marked
__devinit().  So s1d13xxxfb_remove() cannot be marked __devexit.

Does this all make sense?  Clearly the __devexit section will still be in
core when the __devinit code is run, if the driver was loaded as a module.

But I suppose that if the driver is statically linked, the __devexit section
might be dropped early in boot.  Still, we wouldn't drop __devexit prior to
initcall completion, at which point the __devinit code has all been run
anyway.

verdict: this code was legal and made sense.  Is this a generic problem, or an
arm-specific problem?

  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
`.exit.text' referenced in section `.init.text' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o

Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Bring back Tux on Chips 65550 framebuffer

I don't see any reason why the framebuffer should need to be cleared,
and it makes Tux vanish.

Cc: <linux-fbdev-devel@lists.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] isofs: show hidden files, add granularity for assoc/hidden files flags

The current isofs treatment of hidden files is flawed in two ways.  First,
it does not provide sufficient granularity; it hides both 'hidden' files
and 'associated' files (resource fork for Mac files).  Second, the default
behavior to completely strip hidden files, while an admirable
implementation of the spec, is a poor choice given the real world use of
hidden files as a poor mans copy protection scheme for MSDOS and Windows
based systems.  A longer description of this is available here:

   http://www.uwsg.iu.edu/hypermail/linux/kernel/0205.3/0267.html

This patch was originally built after a few private conversations with Alan
Cox; I shamefully failed to persist in seeing it go forward, I hope to make
amends now.

This patch introduces granularity by allowing explicit control for both
hidden and associated files.  It also reverses the default so that by
default, hidden files are treated as regular files on the iso9660 file
system.

This allow Wine to process Windows CDs, including those that are hybrid
Mac/Windows CDs properly and completely, without our having to go muck up
peoples fstabs as we do now.  (I have tested this with such a hybrid +
hidden CD and have verified that this patch works as claimed).

Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: handle directory overflows

Handle the case where the variable-sized part of a rock-ridge directory entry
overhangs the end of the buffer which we allocated for it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: rename union members

The silly thing does:

struct foo { ... };
...
#define foo 42

so you can no longer refer to `struct foo' in C code.

Rename the structures.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock.c: handle corrupted directories

The bug in rock.c is that it's totally trusting of the contents of the
directories.  If the directory says there's a continuation 10000 bytes into
this 4k block then we cheerily poke around in memory we don't own and oops.

So change rock_continue() to apply various sanity checks, at least ensuring
that the offset+length remain within the bounds for the header part of a
struct rock_ridge directory entry.

Note that the kernel can still overindex the buffer due to the variable size
of the rock-ridge directory entries.  We cannot check that in rock_continue()
unless we go parse the directory entry's signature and work out its size.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] isofs: remove debug stuff

isofs/inode.c:

- Remove some crufty leak detection code

- coding style cleanups

- kfree(NULL) is permitted.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: lindent rock.h

So we have a couple of rock-ridge bugs.  First up, rotoroot the poor thing
into something which it is possible to work on.

Feed rock.h through Lindent, tidy a couple of things by hand.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: comment tidies

Be a bit more standard in comment layout.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: remove MAYBE_CONTINUE

- remove the MAYBE_CONTINUE macro

- kfree(NULL) is OK.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: remove SETUP_ROCK_RIDGE

- Remove the SETUP_ROCK_RIDGE macro.

- In rock_ridge_symlink_readpage(), rename raw_inode to raw_de.  It points
  at a directory entry, not an inode.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: remove CHECK_CE

Remove the CHECK_CE macro

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: remove CONTINUE_DECLS

Remove the CONTINUE_DECLS macro.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: remove CHECK_SP

Remove the CHECK_SP macro.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: manual tidies

Fix stuff which Lindent got wrong, rework a few deeply-nested blocks.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rock: lindent it

Trying to turn rock.c into something which humans can read so we can fix some
bugs.

Start out by feeding it through scripts/Lindent.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] autofs4: subversion bump to identify these changes

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] autofs4: bad lookup fix

For browsable autofs maps, a mount request that arrives at the same time an
expire is happening can fail to perform the needed mount.

This happens becuase the directory exists and so the revalidate succeeds when
we need it to fail so that lookup is called on the same dentry to do the
mount.  Instead lookup is called on the next path component which should be
whithin the mount, but the parent isn't mounted.

The solution is to allow the revalidate to continue and perform the mount as
no directory creation (at mount time) is needed for browsable mount entries.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] autofs4: post expire race fix

At the tail end of an expire it's possible for a process to enter
autofs4_wait, with a waitq type of NFY_NONE but find that the expire is
finished.  In this cause autofs4_wait will try to create a new wait but not
notify the daemon leading to a hang.  As the wait type is meant to delay mount
requests from revalidate or lookup during an expire and the expire is done all
we need to do is check if the dentry is a mountpoint.  If it's not then we're
done.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] autofs4: avoid panic on bind mount of autofs owned directory

While this is not a solution to bind and move mounts on autofs owned
directories it is necessary to fix the trady error handling.

At least it avoids the kernel panic I observed checking out bug #4589.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ibmasm driver: fix race in command refcount logic

This patch fixes a race in the command reference counting logic by putting
spinlocks around kobject_put() in the command_put function.

- Also added debug messages.

- Changed a memcpy to memcpy_fromio since we are reading from io space.

Signed-off-by: Max Asbock <masbock@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ibmasm driver: redesign handling of remote control events

This patch rewrites the handling of remote control events.  Rather than making
them available from a special file in the ibmasmfs, now the events from the
RSA card get translated into kernel input events and injected into the input
subsystem.  The driver now will generate two /dev/input/eventX nodes -- one
for the keyboard and one for the mouse.  The mouse node generates absolute
events more like a touch pad than a mouse.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Max Asbock <masbock@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ibmasm driver: correctly wake up sleeping threads

Due to my incomplete understanding of the wait_event_interruptible() function
threads waiting for service processor events were not woken up.  This patch
fixes that problem.

Signed-off-by: Max Asbock <masbock@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ibmasm driver: fix command buffer size

First of a series of patches for the ibmasm driver.  (that is the driver for
the IBM xSeries RSA service processor)

To summarize what they do:

[1] change a #define for the buffer size for commands

[2] Fix a bug where threads in the event handling code calling
    wait_event_interruptible() weren't woken up as expected.

[3] Redesigned how remote mouse and keyboard events received by the driver
    are handled.

[4] Fixed a race in the command reference counting logic.

This patch:

- change a #define for the buffer size for commands

Signed-off-by: Max Asbock <masbock@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: pending interrupt after ipl from reader

Wait for interrupt and clear status pending after resetting the reader.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: memory detection > 32GB

The kernel takes a very long time to boot if the memory size is bigger then
32767 MB.  The memory size is contained in a structure created by an sclp
call.  The kernel accesses the field with a LH instrution which performs a
sign extension of a 16 bit word.  In the case of a memory size with bit 2^15
set this results in a very large value and the memory detection just loops for
a long time.  In addition if more then 64 GB are used on a 64 bit system the
memory size is read from an incorrect storage location.

Use zero-extention to read the 16 bit memory size and the correct offset to
read the 4 byte memory size on 64 bit.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: cmm sender parameter visibility

Make cmm module parameter "sender" visible in sysfs.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: kernel stack overflow panic

die() doesn't return, therefore print registers and then panic instead.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: #ifdefs in compat_ioctls

Remove superflous #if .. #endif pairs from compat_ioctl.c.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: cio documentation

Some clarifications in the cio documentation.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: cio max channels checks

Fix max channel check in cio_ignore display function.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix linkage of tt mode against NPTL

With Al Viro <viro@parcelfarce.linux.theplanet.co.uk>

To make sure switcheroo() can execute when we remap all the executable
image, we used a trick to make it use a local copy of errno...  this trick
does not work with NPTL glibc, only with LinuxThreads, so use another
(simpler) one to make it work anyway.

Hopefully, a lot improved thanks to merging with the version of Al Viro
(which had his part of problems, though, i.e.  removing a fix to another
bug and not fixing the problem on i386).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: make hw_controller_type->release exist only for archs needing it

With Chris Wedgwood <cw@f00f.org>

As suggested by Chris, we can make the "just added" method ->release
conditional to UML only (better: to archs requesting it, i.e.  only UML
currently), so that other archs don't get this unneeded crud, and if UML
won't need it any more we can kill this.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: complete hw_controller_type->release conversion

This occurrence of free_irq_by_irq_and_dev() was missed when converting UML
to the use of hw_controller_type->release.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: add and use generic hw_controller_type->release

With Chris Wedgwood <cw@f00f.org>

Currently UML must explicitly call the UML-specific
free_irq_by_irq_and_dev() for each free_irq call it's done.

This is needed because ->shutdown and/or ->disable are only called when the
last "action" for that irq is removed.

Instead, for UML shared IRQs (UML IRQs are very often, if not always,
shared), for each dev_id some setup is done, which must be cleared on the
release of that fd.  For instance, for each open console a new instance
(i.e.  new dev_id) of the same IRQ is requested().

Exactly, a fd is stored in an array (pollfds), which is after read by a
host thread and passed to poll().  Each event registered by poll() triggers
an interrupt.  So, for each free_irq() we must remove the corresponding
host fd from the table, which we do via this -release() method.

In this patch we add an appropriate hook for this, and remove all uses of
it by pointing the hook to the said procedure; this is safe to do since the
said procedure.

Also some cosmetic improvements are included.

This is heavily based on some work by Chris Wedgwood, which however didn't
get the patch merged for something I'd call a "misunderstanding" (the need
for this patch wasn't cleanly explained, thus adding the generic hook was
felt as undesirable).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Use asm-generic/div64.h

The current include/asm-m32r/div64.h of 2.6.12-rc5 looks buggy.  Here is a
patch for updating it to use asm-generic/div64.h for m32r like other
architectures.

Signed-off-by: Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Update defconfig files

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Remove include/asm-m32r/m32102peri.h

This patch removes an obsolete header file include/asm-m32r/m32102peri.h.
In this header, there are some undesirable single character types, like V.
And the header is almost no longer used.

Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Cleanup arch/m32r/mm/extable.c

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Update m32r_cfc.[ch] to support Mappi-III platform

This patch is for the M32R CF/PCMCIA drivers to support a new platform,
Mappi-III evaluation board.

Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Update setup_xxxxx.c

Change coding styles of hw_interrupt_type struct's initialization portions.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m32r: Support M3A-2170(Mappi-III) platform

This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III)
evaluation board.  An M32R chip multiprocessor is equipped on the board.
http://http://www.linux-m32r.org/eng/platform/platform.html

* arch/m32r/Kconfig: Support Mappi-III platform.
* arch/m32r/kernel/Makefile: ditto.
* arch/m32r/kernel/io_mappi3.c: ditto.
* arch/m32r/kernel/setup.c: ditto.
* arch/m32r/kernel/setup_mappi3.c: ditto.
* include/asm-m32r/m32102.h: ditto.
* include/asm-m32r/m32r.h: ditto.
* include/asm-m32r/mappi3/mappi3_pld.h: ditto.

* include/asm-m32r/ide.h: CF support for Mappi-III.
* arch/m32r/kernel/setup_mappi3.c: ditto.

* arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III.
* arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III.

* arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III
  - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III,
    on the contrary it makes MMU on for Mappi-II.

* arch/m32r/kernel/io_mappi2.c: Update comments.
* arch/m32r/kernel/setup_mappi2.c: ditto.

Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioc4: PCI bus speed detection

Several hardware features of SGI's IOC4 I/O controller chip require
timing-related driver calculations dependent upon the PCI bus speed.  This
patch enables the core IOC4 driver code to detect the actual bus speed and
store a value that can later be used by the IOC4 subdrivers as needed.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioc4: CONFIG split

The SGI IOC4 I/O controller chip drivers are currently all configured by
CONFIG_BLK_DEV_SGIIOC4.  This is undesirable as not all IOC4 hardware features
are needed by all systems.

This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4
driver support (see patch 1/3 in this series for further explanation) and
CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com>
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioc4: Core driver rewrite

This series of patches reworks the configuration and internal structure
of the SGI IOC4 I/O controller device drivers.

These changes are motivated by several factors:

- The IOC4 chip PCI resources are of mixed use between functions (i.e.
  multiple functions are handled in the same address range, sometimes
  within the same register), muddling resource ownership and initialization
  issues.  Centralizing this ownership in a core driver is desirable.

- The IOC4 chip implements multiple functions (serial, IDE, others not
  yet implemented in the mainline kernel) but is not a multifunction
  PCI device.  In order to properly handle device addition and removal
  as well as module insertion and deletion, an intermediary IOC4-specific
  driver layer is needed to handle these operations cleanly.

- All IOC4 drivers are currently enabled by a single CONFIG value.  As
  not all systems need all IOC4 functions, it is desireable to enable
  these drivers independently.

- The current IOC4 core driver will trigger loading of all function-level
  drivers, as it makes direct calls to them.  This situation should be
  reversed (i.e. function-level drivers cause loading of core driver)
  in order to maintain a clear and least-surprise driver loading model.

- IOC4 hardware design necessitates some driver-level dependency on
  the PCI bus clock speed.  Current code assumes a 66MHz bus, but the
  speed should be autodetected and appropriate compensation taken.

This patch series effects the above changes by a newly and better designed
IOC4 core driver with which the function-level drivers can register and
deregister themselves upon module insertion/removal.  By tracking these
modules, device addition/removal is also handled properly.  PCI resource
management and ownership issues are centralized in this core driver, and
IOC4-wide configuration actions such as bus speed detection are also
handled in this core driver.

This patch:

The SGI IOC4 I/O controller chip implements multiple functions, though it is
not a multi-function PCI device.  Additionally, various PCI resources of the
IOC4 are shared by multiple hardware functions, and thus resource ownership by
driver is not clearly delineated.  Due to the current driver design, all core
and subordinate drivers must be loaded, or none, which is undesirable if not
all IOC4 hardware features are being used.

This patch reorganizes the IOC4 drivers so that the core driver provides a
subdriver registration service.  Through appropriate callbacks the subdrivers
can now handle device addition and removal, as well as module insertion and
deletion (though the IOC4 IDE driver requires further work before module
deletion will work).  The core driver now takes care of allocating PCI
resources and data which must be shared between subdrivers, to clearly
delineate module ownership of these items.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mips: add vr41xx gpio support

Add vr41xx gpio support.

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: set/clear SMT capable bit at boot

Allow the SMT bit to be set/reset at boot, like the ALTIVEC bit.  This
means we will enable SMT on unknown cpus that support it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Mark kernel hptes dirty

We dont use the hardware referenced and changed bits and setting them early
avoids a store to memory.  We already do this for userspace hptes but not
kernel ones.  Do it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: tidy up vio devices fake parent

Currently we dynamically allocate the fake parent device for all devices on
the vio bus.  This patch statically allocates it.  This also allows us to
reuse it for the iSeries "generic" vio device (that is used for passing to
dma routines when communicating with the hypervisor without a device
involved).  Also unexport vio_bus_type as it is never used in modules.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: allow build with no PCI

This patch allows iSeries to build with CONFIG_PCI=n.  This is useful for
partitions that have only virtual I/O.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: tidy up irq code after merge

This patch just removes some dead code, fixes messages that referred to the
file this code used to be in and inserts XmPciLpEvent_init into its caller.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove XmPciLpEvent.c

This patch just merges XmPciLpEvent.c into iSeries_irq.c (the only caller of
its only external function).  XmPciLpEvent.c just contained the lowlevel
iSeries irq code.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: irq simple cleanups

This patch is just simple cleanups to the iSeries irq code.
- whitespace and comments
- rearrange some functions to avoid forward declarations
- remove XmPciLpEvent.h as its functions were declared elsewhere
- remove decaration of function that no longer exists
No semantic changes.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove some more members of iSeries_Device_Node

The AgentId, PhbId, FrameId, CardLocation and Location members of
iSeries_Device_Node are stored early in the boot process just so that a
message about the device can be printed later in the boot process.  Remove
them and construct the message by doing the VPD parsing at the time the
message is printed.

Also remove a few unused defines in iSeries_VpdInfo.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove IoRetry from iSeries_Device_Node

The IoRetry member of iSeries_Devide_Node is really only used locally, so
remove it and replace it with a local variable.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: iSeries_pci.h cleanups

Remove no longer used things from iSeries_pci.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: iSeries_VpdInfo.c cleanups

Clean up iSeries_VpdInfo.c:
- white space and comment fixes
- make a function static
- the functions here are only called from iSeries_pci.c, so
  CONFIG_PCI will be set (so remove check)
- only build when CONFIG_PCI is set
- remove unneeded includes and cast

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: iommu.h cleanups

The iommu_table_cb structure is iSeries specific, so move it to the header
file that declares the function we pass it to.  vio_tce_table and
iommu_setup_iSeries no longer exist, so remove their declarations.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove iSeries_pci_reset.c

The file arch/ppc64/kernel/iSeries_pci_reset contains only one function that
is not use anywhere (any more).  Remove it.  This function is the only user of
the ReturnCode member of iSeries_Device_Node, so remove that as well.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: misc header cleanups

Last of this round of the iSeries header cleanups
- don't have two defines for the same thing (HvMaxArchitectedLps
  and HvMaxArchitectedVirtualLans)
- HvCallSc.h only needs linux/types.h
- remove unused struct definition
- add "extern" to some more function declarations

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: tidy up some includes and HvCall.h

This patch removes some unused bits from HvCall.h and some unneeded #includes
from other files.  Also includes ItLpQueue.h in paca.h in preference to a stub
declaration of struct ItLpQueue.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: cleanup ItLpQueue.h

Just white space cleaups and move process_iSeries_events into its only caller.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove HvCallCfg.h

Now that the only users of things in HvCallCfg.h are in HvLpConfig.h, merge in
the bit we need and remove HvCallCfg.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: eliminate some unused inline functions

This patch removes from the iSeries header files a large number of inline
functions that are not used.  It also changes the only caller of a HvCallCfg
function that is outside HvLpConfig.h to its equivalent HvLpConfig function
and no longer includes HvCallCfg.h where it is not needed.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove LparData.h

include/asm-ppc64/iSeries/LparData.h just included a whole lot of other files
to declare variables that would be better declared in those other files.  So,
remove it.  This will reduce that number of things needed to be included in
most cases to access the relevant variables.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: obvious code simplifications

This patch does some obvious code cleanups in the iSeries headers files.
- simplifies the bodies of lots of inline functions
- parenthesises a macros result
- removes C++ wrapping
- adds "extern" to some function declarations
There are no semantic changes.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: more header file white space cleanups

This patch just contains white space and comment cleanups in the iSeries
headers files.  There are no semantic changes.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: header file white space cleanups

This patch just contains white space and comment cleanups in the iSeries
headers files.  There are no semantic changes.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64 iSeries: remove iSeries_proc.h

include/asm-ppc64/iSeries/iSeries_proc.h just contains a declaration of a
function that no longer exists.  Remove it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: override command line AS/LD/CC variables when adding -m64 and co for biarch compilers

The following kind of calls currently fails :

  make ARCH=ppc64 CC="gcc-3.4"

Since the code for detecting a biarch compiler and adding the needed 64bit
magic argument fails if the AS/LD/CC commands are overriden in the command
line.

The attached patch fixes this by using the make override and += directive,
but i am not 100% sure this will work without gmake, as i am no Makefile
expert.

Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Abolish ioremap_mm

Currently ppc64 has two mm_structs for the kernel, init_mm and also
ioremap_mm.  The latter really isn't necessary: this patch abolishes it,
instead restricting vmallocs to the lower 1TB of the init_mm's range and
placing io mappings in the upper 1TB.  This simplifies the code in a number
of places and eliminates an unecessary set of pagetables.  It also tweaks
the unmap/free path a little, allowing us to remove the unmap_im_area() set
of page table walkers, replacing them with unmap_vm_area().

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Kill embedded system.map, use kallsyms

This patch kills the whole embedded System.map mecanism and the
bootloader-passed System.map that was used to provide symbol resolution in
xmon.  Instead, xmon now uses kallsyms like ppc64 does.

No hurry getting that in Linus tree, let it be tested in -mm for a while
first and make sure it doesn't break various embedded configs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: don't recursively crash in die() on CHRP/PReP machines

This patch avoids recursive crash (leading to kernel stack overflow) in
die() on CHRP/PReP machines when CONFIG_PMAC_BACKLIGHT=y.  set_backlight_*
functions are placed in pmac section, which is discarded when _machine !=
_MACH_Pmac.

Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: remove some unnecessary includes of prom.h

Fight the Good Fight: Limit prom.h header creep.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Factor out common exception code into macro's for 4xx/Book-E

4xx and Book-E PPC's have several exception levels.  The code to handle
each level is fairly regular.  Turning the code into macro's will ease the
handling of future exception levels (debug) in forth coming chips.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Clean up NUM_TLBCAMS usage for Freescale Book-E PPC's

Made the number of TLB CAM entries private and converted the board
consumers to use num_tlbcam_entries which is setup at boot time from
configuration registers.  This way the only consumers of the #define
NUM_TLBCAMS are the arrays used to manage the TLB.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Added support for all MPC8548 internal interrupts

The MPC8548 has 48 internal interrupts and 12 external interrupts.  The
previous generation PowerQUICC III devices only had 32 internal and 12
external interrupts on the primary interrupt controller.

Expanded the number of internal interrupts to 48 for all PowerQUICC III
processors and moved the interrupt numbers for the external after the 48
internal interrupt lines, rather than putting the 12 new internal
interrupts at the end and ifdef'ng the whole mess.  As parted of this
created a macro which represents the internal interrupt senses since they
are the same on all PQ3 processors.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: remove orphaned ppc4xx_kgdb.c

Removes ppc4xx_kgdb.c which is no longer being used.  Pointed out by Andrei
Konovalov.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Add support for MPC8245 8250 serial ports on Sandpoint

Added platform device initialization for the two 8250 style UARTs that
exist on the MPC8245.  Additionally, updated the Sandpoint code to enable
one of these UARTs if an MPC8245 is connected to it.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: fix CONFIG_TASK_SIZE handling on 40x

This patch is virtually identical to my previous 44x one.  It removes
0x8000'0000 TASK_SIZE hardcoded assumption from head_4xx.S.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cpm_uart: Route SCC2 pins for the STx GP3 board

Adds SCC2 pin routing specific to the GP3 board.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCP

Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used
the standard platform device model.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Removed dependency on CONFIG_CPM2 for building mpc85xx_device.c

Previously we needed CONFIG_CPM2 enabled to get the proper IRQ ifdef's for
CPM interrupts.  Recent changes have caused that to be no longer necessary.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Added preliminary support for the MPC8548 CDS board

Adds support for using the MPC8548 processor on the CDS reference board.
Currently all the major busses (PCI, PCI-X, PCI-Express, sRIO) and eTSEC3
and eTSEC4 are not supported.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: Added support for new MPC8548 family of PowerQUICC III processors

Added descriptions of the new MPC8548 family processors, e500 core and
peripherals.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SELinux: memory leak in selinux_sb_copy_data()

There is a memory leak during mount when SELinux is active and mount
options are specified.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Acked-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] VFS: memory leak in do_kern_mount()

There is a memory leak during mount when CONFIG_SECURITY is enabled and
mount options are specified.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kbuild: display compile version

I am always trying to make sure I've booted the right kernel after a new
install.  Too paranoid maybe.  But I guess there're other people like me.
So let's make kbuild display the compile version number at the end to give
us a hint.  I know we may be booting vmlinux someday, but don't care about
it for now.

Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] 3c59x: remove superfluous vortex_debug test from boomerang_start_xmit()

Remove the superfluous test of "if (vortex_debug > 3)" inside the "if
(vortex_debug > 6)" clause early in boomerang_start_xmit.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Kill stray newline

OOM killer prints a stray newline.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] msync: check pte dirty earlier

It's common practice to msync a large address range regularly, in which
often only a few ptes have actually been dirtied since the previous pass.

sync_pte_range then goes much faster if it tests whether pte is dirty
before locating and accessing each struct page cacheline; and it is hardly
slowed by ptep_clear_flush_dirty repeating that test in the opposite case,
when every pte actually is dirty.

But beware, s390's pte_dirty always says false, since its dirty bit is kept
in the storage key, located via the struct page address.  So skip this
optimization in its case: use a pte_maybe_dirty macro which just says true
if page_test_and_clear_dirty is implemented.

Signed-off-by: Abhijit Karmarkar <abhijitk@veritas.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>