staging: rtl8188eu: Remove unused function declaration and macro

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function _rtw_write_mem()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused funtion _rtw_read_mem()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused struct intf_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu:Move rtw_hw_[suspend, resume]() to rtw_pwrctrl.c

rtw_hw_[suspend,resume]() functions are used only in rtw_pwrctrl.c,
so move these functions there.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtw_init_intf_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtw_deinit_intf_priv()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: usb_halinit.c: Remove ReadAdapterInfo8188EU()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: os_dep: usb_intf.c: Cleaning up unnecessary code

Removes unnecessary code that does not do anything useful.

This was partly found using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function with empty defination()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function nat25_handle_frame()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove bCardDisableWOHSM from struct adapter

driver doesn't use value stored in bCardDisableWOHSM.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove pbuddy_adapter from struct adapter

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu:Remove EepromAddressSize from struct adapter

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member variable of struct adapter

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove hal_data_sz from struct adapter

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtl8188e_clone_haldata()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove DriverState from struct adapter

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove enum driver_state

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused enum _IFACE_TYPE

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused enum _ADAPTER_TYPE

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove usb_alloc_vendor_req_buf from struct dvobj_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove usb_suspend_sema from struct dvobj_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused members of struct dvobj_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused enum

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused stucture defination struct specific_device_id

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function declarations in usb_intf.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use module_usb_driver() macro

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove struct rtw_usb_drv

struct rtw_usb_drv contains only one member usb_driver structure,
so no use of keeping it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging : rtl8188eu: Remove drv_registered from struct rtw_usb_drv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use unregistering flag from struct usb_interface

Use unregistering flag from struct usb_interface to find
driver registration status.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove hw_init_mutex from struct rtw_usb_drv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove header file rtw_version.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging :rtl8188eu: Remove HalPhyRf.[h|c] files.

Move ODM_GetRightChnlPlaceforIQK() from HalPhyRf.c to HalPhyRf_8188e.c.
Move ODM_TARGET_CHNL_NUM_2G_5G from HalPhyRf.h to HalPhyRf_8188e.h.
After the movement of function and macro HalPhyRf.[h|c] files are redundant.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function with empty defination ODM_ResetIQKResult()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove usb_vendor_req.h header file

driver doesn't need usb_vendor_req.h.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove Hal8188EReg.h file

Driver doesn't need Hal8188EReg.h file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove "last_tx_complete_time" from struct sreset_priv

value stored in variable last_tx_complete_time isn't being used
by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove "last_tx_time" from struct sreset_priv

value stored in variable last_tx_time isn't being used
by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove empty files rtl8188e_sreset.[c|h]

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtl8188e_silentreset_for_specific_platform()

Remove rtl8188e_silentreset_for_specific_platform() and function pointer
->silentreset pointing to it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_hal_sreset_reset()

rtw_hal_sreset_reset() is a wrapper to call
rtl8188e_silentreset_for_specific_platform(), which has empty defination.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu: Remove function rtl8188e_sreset_linked_status_check()

Remove rtl8188e_sreset_linked_status_check() and function pointer
->sreset_linked_status_check pointing to it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu: Remove function rtw_hal_sreset_linked_status_check()

rtw_hal_sreset_linked_status_check() is a wrapper to call
rtl8188e_sreset_linked_status_check(), which doesn't do anything
useful.

rtl8188e_sreset_linked_status_check() will also be removed later.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtl8188e_sreset_xmit_status_check()

Remove rtl8188e_sreset_xmit_status_check() and function pointer
->sreset_xmit_status_check pointing to it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_hal_sreset_xmit_status_check()

rtw_hal_sreset_xmit_status_check() is a wrapper to call
rtl8188e_sreset_xmit_status_check(), which calls
rtl8188e_silentreset_for_specific_platform() in case of transmission has
stopped to do a silent reset and restore the transmission but
rtl8188e_silentreset_for_specific_platform() has empty defination,
so we can remove rtw_hal_sreset_xmit_status_check() because it doesn't
serve its purpose.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function reset_reset_value()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function pointer ->sreset_reset_value

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_hal_sreset_reset_value()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use rtw_hal_sreset_init() in rtw_reset_drv_sw()

We can replace rtw_hal_sreset_reset_value() with rtw_hal_sreset_init() because
both function call sreset_reset_value() and sreset_init_value() respectively at
the end of code path, and function defination of sreset_reset_value() and
sreset_init_value() is identical.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu:Remove "silent_reset_inprogress" from struct sreset_priv

psrtpriv->silent_reset_inprogress is always false.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove "silentreset_mutex" from struct sreset_priv

silentreset_mutex initialized but not being used.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8192ee: fix coccinelle warnings

drivers/staging/rtl8192ee/btcoexist/halbtc8821a2ant.c:2491:3-4: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: /kbuild/src/linux/scripts/coccinelle/misc/semicolon.cocci

CC: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: octeon: minor style cleanups

Done as task 10 of the eudyptula challenge.

Signed-off-by: Nicolas Koch <nioko1337@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: Move PHY activation to .ndo_open().

This prevents PHY not found types of errors for PHY drivers that are
probed after the Ethernet driver is probed, because the ifconfig UP is
done from userspace after all drivers have been probed.

Also avoid the cvmx-helper-board.c PHY code if a real PHY driver is
present, this allows a bootloader supplied device tree to specify the
PHY information rather than having to modify the code for each
different board.

Tested-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: unwind on error in dgap_init_one()

The dgap_init_one() needs to handle error properly
if one of functions in dgap_init_one() is failed.

Introduce some functions for handling error in dgap_init_one()
 - dgap_tty_unregister() : unregister tty driver
 - dgap_free_flipbuf() : free flip buffer
 - dgap_release_remap() : release memory region and unmapped memory.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: move unrelated functions in dgap_firmware_load()

The dgap_firmware_load() has a lot of stuff which are
unrelated with loading firmware.
So just moved to dgap_init_one().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: rename dgap_after_config_loaded() to dgap_alloc_flipbuf()

dgap_after_config_loaded() as function name doesn't tell
what it does.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: introduce dgap_free_irq()

dgap_free_irq() will free the irq which is requested in
dgap_request_irq().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: introduce dgap_tty_free() for freeing channels.

It should be called after dgap_tty_register_ports() is failed.
So channels which are allocated in dgap_tty_init() will be freed.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: get rid of brd->firstminor because it is 0

firstminor in struct borad_t is always zero, so it
can be removed.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unused paramter in dgap_parsefile()

"remove" parameter is not used in dgap_parsefile().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: rename dgap_tty_uninit() to dgap_cleanup_tty()

- dgap_tty_uninit() doesn't match dgap_tty_init() at all.
so rename it. It is just used for cleanup when this module is
exited or failed to initialize by dgap_init_module.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: rename dgap_finalize_board_init() to dgap_request_irq()

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: pass "brd" as a paramter to dgap_after_config_loaded()

Pass "brd" to dgap_after_config_loaded() instead of passing
"dgap_numboards" and looking up brd again.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: pass "dgap_numboards" as a paramter to dgap_found_board()

- Pass "dgap_numboards" to dgap_found_board() instead of
using a global variable.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: make dgap_config_buf a local buffer

The dgap_config_buf is only used in dgap_firmware_load().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: unwind on error in dgap_tty_register_ports()

- The dgap_tty_register_ports() needs to handle if the
tty_port_register_device() fails.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: unwind on error in dgap_tty_init()

If the kzalloc() fails for channels, it need to handle
that error. It should free channels which were already
allocated.

And also removes the call to dgap_tty_uninit() in
dgap_firmware_load().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove bogus null test in dgap_tty_init()

- The channels array were set to NULL in dgap_found_board().
- Removes redundant null check for channels array in for loop,
if one of the channel cannot be allocated, dgap_tty_init() just returns
an error.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: unwind on error in dgap_found_board()

Adds a label for "kfree(brd)". And also remove
a state value as BOARD_FAILED in brd when dgap_do_remap() is failed.
Because "brd" will free after failure.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove useless dgap_probe1() function

The dgap_probe1() function is just calling dgap_found_board().
So it is removed and dgap_found_board() is called directly.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: r8192U_core.c: Cleaning up unclear and confusing code

Removes confusing and unclear code.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_core.c Converted a C99 comment to fix code-style error

Converted a C99 comment to fix the following error:

ERROR: trailing statements should be on next line

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_core.c Fixed open brace { placement

Fixed open brace placement to address the following code-style errors:

ERROR: that open brace { should be on the previous line

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_core.c Converted some C99 comments to fix code-style errors

Converted some C99 warnings to fix the following error:

ERROR: trailing statements should be on next line

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_core.c Rearranged statements to fix code-style errors

Rearranged statements around if and switch statements to address the following error:

ERROR: trailing statements should be on next line

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_core.c Added a space after ','

Added spaces after ',' to fix the following warning:

ERROR: space required after that ',' (ctx:VxV)

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_wx.c Removed some more commented out dead code

Removed dead code from the file.

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove checks for CONFIG_IEEE80211_CRYPT_TKIP

Ever since rtl8192u was added as a staging driver in v2.6.33 it contained
checks for CONFIG_IEEE80211_CRYPT_TKIP. But the Kconfig symbol
IEEE80211_CRYPT_TKIP was renamed to LIB80211_CRYPT_TKIP in v2.6.29. So
these checks have always evaluated to false. And these checks were rather
odd to begin with, since rtl8192u comes with its own ieee80211 stack,
which has support for TKIP built in.

Now the safe and easy thing to do here would be to remove these checks
and the code they hide. But it turns out that with some minor cleanup
the code currently hidden behind these checks builds cleanly. And by
building it we allow the people actually running this code to test
whether it is any good.

That minor cleanup is needed because ieee80211_encrypt_fragment()
accesses struct sk_buff's data member as if it is a struct
ieee80211_hdr. It's not. See, in ieee80211_xmit() a struct
ieee80211_hdr_3addrqos is skb_put() into the sk_buff with which
ieee80211_encrypt_fragment() will be called. So switch from
ieee80211_hdr to ieee80211_hdr_3addrqos here.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_wx.c Added a single space for code-style issue

Added a space around '|' to address:

ERROR: need consistent spacing around '|' (ctx:VxW)

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_wx.c Removed all C99 comments

To address the error -

ERROR: do not use C99 // comments

Removed all C99 comments.

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: r8192U_wx.c removed commented dead code

Removed dead code, commented out printks and DMESG.

Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: board: kzm9d: Board staging support for emxx_udc

Add staging board support for the KZM9D board and add
an emxx_udc platform device to allow in-tree continous
development of the driver on the KZM9D board.

When DT bindings are ready for the emxx_udc driver then
the platform device in the KZM9D staging board code can
easily be removed. Until then we use platform devices
to continously improve the driver and integration code.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: board: Initial board staging support

Add staging board base support to allow continuous upstream
in-tree development and integration of platform devices.

Helps developers integrate devices as platform devices for
device drivers that only provide platform device bindings.
This in turn allows for incremental development of both
hardware feature support and DT binding work in parallel.

Two separate pieces of board staging functionality is
provided to ease per-board staging board support:
 - The board_staging() macro allows easy per-board callbacks
 - The board_staging_dt_node_available() provides DT node checking

Tested on the KZM9D board with the emxx_udc staging driver.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Add TODO file

Add a TODO file for emxx_udc to show what is left to do.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: I/O memory and IRQ resource support

Adjust the emxx_udc driver to make use of the standard
driver model to pass I/O memory and IRQ as resources
instead of hard coding those things in the driver.

Needs more work - the VBUS signal is yet not handled.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Add Emma Mobile USB Gadget driver

Add the emxx_udc driver to staging based on an old linux-2.6.35.7
android tree. The driver has been brushed up slightly to complile
but it is still in great need of cleanup.

At this point DT bindings are clearly lacking and I doubt that the
driver even can run with multiple instances (global variables, hurray!).

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging: tidspbridge: use safer test on the result of find_first_zero_bit"

This reverts commit cc0be81f00472d782804293766ddd9d1c2b4ebd1, it was
incorrect.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: remove stc read/write callbacks from ni_private

The drivers that include ni_mio_common.c set the stc register read/write
callbacks to private functions that handle the read/write operations in
the correct manner for the hardware.

The ni_atmio and ni_mio_cs drivers use identical code to handle the
operations.

The ni_pcimio driver is a bit different due to the non-windowed setup
of the stc registers on the m series boards. For the other boards
supported by the ni_pcimio driver, the direct access of the first 8
STC registers is also disabled due to a difference on the 611x devices.

These differences can all be handled in the ni_stc_{read,write}[lw]()
helpers. Refactor the helpers and remove the callbacks from the private
data.

Also, move the helper functions the handle the mapping of the windowed
STC register offsets to M series register offset from ni_pcimio.c to
ni_mio_common.c.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: remove read/write callbacks from ni_private

The drivers that include ni_mio_common.c set the read/write callbacks
to private functions that handle the read/write operations in the
correct manner for the hardware. The ni_atmio and ni_mio_cs drivers
use ioport register access and the ni_pcimio driver uses memory mapped
register access. The memory mapped base address is stored in the 'mite'
pointer in the private data which is only allocated and initialized by
the ni_pcimio driver.

Detect the need for memory mapped register access by checking if the
'mite' pointer is set in the private data and remove the callbacks
from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common.c: wrap the read/write operations

The ni_atmio, ni_pcimio, and ni_mio_cs drivers all include this source
file to handle the common functionality of the drivers. Each of those
drivers set some function pointers in the private data to handle the
read/write operations to the normal registers.

Like done for the stc register operations, wrap these operations with
some helper functions to clarify the code a bit and make it easier to
read and maintain.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common.c: wrap the stc_read/write operations

The ni_atmio, ni_pcimio, and ni_mio_cs drivers all include this source
file to handle the common functionality of the drivers. Each of those
drivers set some function pointers in the private data to handle the
read/write operations to the stc registers.

Wrap these operations with some helper functions to clarify the code
a bit and make it easier to read and maintain.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: cleanup ni_e_series_enable_second_irq()

This function is used to enable/disable the second irq on NI e-series
boards. This irq used used to generate dma requests for the counters.

There are only 2 counters (NUM_GPCT) so the default case of the switch
can never occur.

Tidy up this function and remove the unreachable BUG().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: add a 'is_m_series' flag to private data

The (board->reg_type & ni_reg_m_series_mask) test is commonly used
in ni_mio_common.c to detect if the driver is being used with a
National Instruments "M series" DAQ board. Simplify the code a bit
by adding an 'is_m_series' bit-field flag to the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Eliminate last rtw_get_beacon_interval*() usage

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove last users of rtw_get_capability*() functions

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_get_bcn_info23a(): Use __func__ in debug prints

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_get_bcn_info23a(): Use capability from wlan_bssid_ex

This eliminates yet another user of rtw_get_capability23a_from_ie()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>