firefly-linux-kernel-4.4.55.git
13 years agoMerge branch android-tegra-2.6.36 into android-tegra-moto-2.6.36
Erik Gilling [Thu, 7 Apr 2011 21:37:03 +0000 (14:37 -0700)]
Merge branch android-tegra-2.6.36 into android-tegra-moto-2.6.36

Change-Id: I190487c0932d67872e1c29c0d2296f24a515851c

13 years agoMerge branch linux-tegra-2.6.36 into android-tegra-2.6.36
Erik Gilling [Thu, 7 Apr 2011 21:33:20 +0000 (14:33 -0700)]
Merge branch linux-tegra-2.6.36 into android-tegra-2.6.36

Change-Id: If54be4c2e106e24beb0ae3063156a0659fcbb943

13 years agovideo: tegra: use longer retries for hdcp
Jon Mayo [Wed, 6 Apr 2011 20:15:20 +0000 (13:15 -0700)]
video: tegra: use longer retries for hdcp

use 3 seconds for i2c/ddc failures on hdcp (15 attempts at 250mS each)

Change-Id: Ia755c9b42d5a0d8467b68c9d334638bcb015eabd
Signed-off-by: Erik Gilling <konkers@android.com>
13 years agovideo: tegra: attempt HDCP on DVI
Erik Gilling [Thu, 7 Apr 2011 17:33:55 +0000 (10:33 -0700)]
video: tegra: attempt HDCP on DVI

Change-Id: If9efc63de3427f263b121e102cd0168883a236a3
Signed-off-by: Erik Gilling <konkers@android.com>
13 years agonet: usb: cdc_ether: use oob_wake for wrigley modem on tegra
James Wylder [Tue, 5 Apr 2011 18:00:29 +0000 (13:00 -0500)]
net: usb: cdc_ether: use oob_wake for wrigley modem on tegra

Change-Id: Ic00782db2ff8a1a791d3324db16dc21a8016e2ca
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agousb: misc: out-of-band wake for usb devices
James Wylder [Mon, 14 Mar 2011 23:45:26 +0000 (18:45 -0500)]
usb: misc: out-of-band wake for usb devices

Allow interrupts to wake usb bus for devices/hosts
that don't support remote wakeup.

Change-Id: I4c520264c8a9b456f9cfe0e49d1bb9a6a9496b5a
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agonet: usb: qcusbnet: Enable Error message printing
srinivas gowrishetty [Wed, 6 Apr 2011 19:13:36 +0000 (12:13 -0700)]
net: usb: qcusbnet: Enable Error message printing

All the messages in QMI USBNET driver are disabled by default. Added a new
macro to enable printing of all error messages by default.

Change-Id: I6aad73fcf8d94dfbd495d36c4491c74a2095f5d3
Signed-off-by: Srinivas Gowrishetty <srinivas.gowrishetty@motorola.com>
13 years agoMerge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36
Colin Cross [Fri, 1 Apr 2011 00:42:30 +0000 (17:42 -0700)]
Merge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36
Colin Cross [Fri, 1 Apr 2011 00:42:16 +0000 (17:42 -0700)]
Merge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agovideo: tegra: reset hdcp failure count on hotplug
Erik Gilling [Thu, 31 Mar 2011 23:26:59 +0000 (16:26 -0700)]
video: tegra: reset hdcp failure count on hotplug

Change-Id: Iba5041f8428b13791004c96e6e8c2ed4dbcc37b8
Signed-off-by: Erik Gilling <konkers@android.com>
13 years agousb: host: ehci-tegra: Wait for SOF before resume
Venkata (Muni) Anda [Tue, 29 Mar 2011 06:15:40 +0000 (23:15 -0700)]
usb: host: ehci-tegra: Wait for SOF before resume

Wait for Start Of Frame interrupt, then wait 20 us, before starting
port resume.  Workaround for hardware issue that can cause the SOF to
be sent out at the same time as the phy speed change.

Change-Id: I91ccbd2902448e87aa3cdf1970305de22efa1c10
Signed-off-by: Colin Cross <ccross@android.com>
13 years agousb: otg: cpcap: Allow suspend in host mode
Benoit Goby [Tue, 28 Dec 2010 23:32:45 +0000 (15:32 -0800)]
usb: otg: cpcap: Allow suspend in host mode

Change-Id: Ibc5080ac52646f78cae1eafde91bf6fd582747a5
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: host: ehci-tegra: Wait for SOF before resume
Venkata (Muni) Anda [Tue, 29 Mar 2011 06:15:40 +0000 (23:15 -0700)]
usb: host: ehci-tegra: Wait for SOF before resume

Wait for Start Of Frame interrupt, then wait 20 us, before starting
port resume.  Workaround for hardware issue that can cause the SOF to
be sent out at the same time as the phy speed change.

Change-Id: I91ccbd2902448e87aa3cdf1970305de22efa1c10
Signed-off-by: Colin Cross <ccross@android.com>
13 years agoARM: tegra: stingray: Board file support for external SD card
Mike Lockwood [Tue, 22 Mar 2011 13:08:09 +0000 (09:08 -0400)]
ARM: tegra: stingray: Board file support for external SD card

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agoUSB: gadget: f_accessory: Set bNumEndpoints to correct value of 2
Mike Lockwood [Sun, 27 Mar 2011 15:00:19 +0000 (08:00 -0700)]
USB: gadget: f_accessory: Set bNumEndpoints to correct value of 2

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agoUSB: gadget: f_mtp: Don't block waiting for online state in read()
Mike Lockwood [Fri, 25 Mar 2011 19:22:22 +0000 (12:22 -0700)]
USB: gadget: f_mtp: Don't block waiting for online state in read()

Return -ENODEV instead if USB is not connected.

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agoRevert "usb: otg: cpcap: Allow suspend in host mode"
Colin Cross [Thu, 24 Mar 2011 21:26:33 +0000 (14:26 -0700)]
Revert "usb: otg: cpcap: Allow suspend in host mode"

This reverts commit a45f27a0089f4d6b4936f87a6f5f14649c2c46fe.

13 years agoUse BT POWER force_active parameter for rx data.
Jaikumar Ganesh [Tue, 22 Mar 2011 19:27:11 +0000 (12:27 -0700)]
Use BT POWER force_active parameter for rx data.

We were going to active mode during rx processing which
defeats the purpose of force_active parameter for HID devices.

Based on a report and discussion with Leijun Tao <L.J.Tao@motorola.com>

Change-Id: Ia43682c12795cf2cbd97df2a97e6b3e6cc6dfb34
Signed-off-by: Jaikumar Ganesh <jaikumar@google.com>
13 years agoMerge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36
Colin Cross [Tue, 22 Mar 2011 18:43:45 +0000 (11:43 -0700)]
Merge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36

Conflicts:
drivers/serial/tegra_hsuart.c

Change-Id: I535bef9c6645e5ec86f374a8f4d1fb3569274e53

13 years agoMerge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36
Colin Cross [Tue, 22 Mar 2011 18:42:14 +0000 (11:42 -0700)]
Merge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agoserial: tegra_hsuart: Make sure current byte rx complete in suspend
Andrei Warkentin [Tue, 22 Mar 2011 18:37:47 +0000 (11:37 -0700)]
serial: tegra_hsuart: Make sure current byte rx complete in suspend

Make sure that the last byte has been received by the uart during
suspend after RTS is deasserted.

Change-Id: I3517ec058fdca912ff5ad8770d2b1c5015385385
Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
Signed-off-by: Colin Cross <ccross@android.com>
13 years agovideo: tegra: add HOST1_SYNC regs to nvhost_debug_show dump
Chris Johnson [Tue, 22 Mar 2011 01:20:51 +0000 (18:20 -0700)]
video: tegra: add HOST1_SYNC regs to nvhost_debug_show dump

Change-Id: I48cccf5b0df768b9cfc774803f3945f4806a62ac

13 years agoserial: tegra_hsuart: Call complete callbacks when cancelling reqs
Colin Cross [Wed, 16 Mar 2011 23:56:23 +0000 (16:56 -0700)]
serial: tegra_hsuart: Call complete callbacks when cancelling reqs

Updates the tegra_hsuart driver to match the changes in the Tegra
dma engine.

Change-Id: Iaaf8770166156c1a6d889a6a11bae517626781ee
Signed-off-by: Colin Cross <ccross@android.com>
13 years agoARM: tegra: dma: Do not call complete callback on canceled requests
Colin Cross [Wed, 16 Mar 2011 23:53:24 +0000 (16:53 -0700)]
ARM: tegra: dma: Do not call complete callback on canceled requests

Calling the complete callback when a request is cancelled leads to
locking problems in the callback, which could be called from an IRQ
with no locks held, or from whatever context called
tegra_dma_dequeue_req.  Instead, expect the caller to handle the
now-cancelled request as needed.

Also removes tegra_dma_dequeue, since all users can be trivially
converted to tegra_dma_dequeue_req.

Change-Id: If699239c09c78d1cd3afa0eaad46535b1d401a24
Signed-off-by: Colin Cross <ccross@android.com>
13 years agoRevert "ARM: Cortex-A9: Enable dynamic clock gating"
Rebecca Schultz Zavin [Tue, 22 Mar 2011 18:05:59 +0000 (11:05 -0700)]
Revert "ARM: Cortex-A9: Enable dynamic clock gating"

This reverts commit 91406b03fa4add49db13e55c3220911be55d9883.

13 years agoMerge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36
Rebecca Schultz Zavin [Mon, 21 Mar 2011 21:15:10 +0000 (14:15 -0700)]
Merge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36
Rebecca Schultz Zavin [Mon, 21 Mar 2011 21:14:12 +0000 (14:14 -0700)]
Merge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agoRevert "[ARM] tegra: Enable pl310 data prefetching and prefetch offset"
Rebecca Schultz Zavin [Mon, 21 Mar 2011 21:09:44 +0000 (14:09 -0700)]
Revert "[ARM] tegra: Enable pl310 data prefetching and prefetch offset"

This reverts commit 6c77fdda35688ae3c9d9029a9824f7cf941f348d.

Conflicts:

arch/arm/mach-tegra/common.c

Change-Id: I35858f63da5cfd00885dd765da45db39be16b8b7

13 years agoARM: board: stingray: remove wrigley host_wake gpio
James Wylder [Tue, 15 Mar 2011 23:00:34 +0000 (18:00 -0500)]
ARM: board: stingray: remove wrigley host_wake gpio

Change-Id: If9363474b5e963b4b8eec59877f10b727185d99c
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoradio_ctrl: remove host_wake from wrigley driver
James Wylder [Tue, 15 Mar 2011 22:40:36 +0000 (17:40 -0500)]
radio_ctrl: remove host_wake from wrigley driver

Change-Id: I14f17eea39a4ee208b5be7b268187efe3197f619
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoMerge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36
Rebecca Schultz Zavin [Mon, 21 Mar 2011 20:53:33 +0000 (13:53 -0700)]
Merge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36
Rebecca Schultz Zavin [Mon, 21 Mar 2011 20:52:56 +0000 (13:52 -0700)]
Merge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agovideo: tegra: cleanup debug syncpt output
Chris Johnson [Wed, 16 Mar 2011 21:25:22 +0000 (14:25 -0700)]
video: tegra: cleanup debug syncpt output

In debug prints for stuck WAITs differentiate WAIT_SYNCPT
vs. WAIT_SYNCPT_BASE and fix some build warnings.

Change-Id: Ia47375614c676a9f93216fbfaaf6856c3df42e2e
Signed-off-by: Chris Johnson <cwj@nvidia.com>
13 years agoinput: Set default events per packet for MT devices.
Jeff Brown [Thu, 17 Mar 2011 06:17:05 +0000 (23:17 -0700)]
input: Set default events per packet for MT devices.

Use the number of ABS_MT_SLOTs or ABS_MT_TRACKING_IDs to choose a
default number of events per packet.

Signed-off-by: jeffbrown@android.com
13 years ago[ARM] tegra: stingray add LTE product id to boardfile
James Wylder [Thu, 17 Mar 2011 20:14:45 +0000 (15:14 -0500)]
[ARM] tegra: stingray add LTE product id to boardfile

Change-Id: I1b746852524f50b8da8ddfa4c29ed69199a03b5b
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agomisc: radio_ctrl: wrigley: add reset command
James Wylder [Thu, 17 Mar 2011 19:28:54 +0000 (14:28 -0500)]
misc: radio_ctrl: wrigley: add reset command

Change-Id: Ib0f45c1e9bf584338427e4eb7b1f23334e5c4c8e
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years ago[ARM] tegra: stingray: Samsung memory updates
James Wylder [Fri, 11 Mar 2011 23:00:50 +0000 (17:00 -0600)]
[ARM] tegra: stingray: Samsung memory updates

Update the Samsung dvfs tables based on new measurements
from nVidia (Samsung_1GB_K4P4G154EC-FGC0_DVFS_table_K36).

Change-Id: I8659339a2c4d1306a1b9708e16617d0062dc8c40
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoaudio: tegra: Disable SPDIF GPIO
Praveen Bharathi [Tue, 15 Mar 2011 08:07:18 +0000 (03:07 -0500)]
audio: tegra: Disable SPDIF GPIO

Leaving the SPDIF GPIO unset is causing interference/audio loss
when stingray is mounted on dock connected to HMDI Monitor.
Turning off the SPDIF GPIO (which is unused in the current h/w)
gets rid of the audio pops and eventual audio loss.

Signed-off-by: Praveen Bharathi <pbharathi@motorola.com>
13 years agomisc: l3g4200d: Make enable powerup delay asynchronous
Colin Cross [Wed, 16 Mar 2011 00:37:39 +0000 (17:37 -0700)]
misc: l3g4200d: Make enable powerup delay asynchronous

Moves enable_irq in l3g4200d_enable into a delayed work function
to avoid blocking the enable ioctl for the powerup delay.

Change-Id: Ic93a3526a452a5945e75364fe06200f5626c1eef
Signed-off-by: Colin Cross <ccross@android.com>
13 years agoMerge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36
Rebecca Schultz Zavin [Tue, 15 Mar 2011 23:59:51 +0000 (16:59 -0700)]
Merge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge remote branch 'common/android-2.6.36' into android-tegra-2.6.36
Rebecca Schultz Zavin [Tue, 15 Mar 2011 23:51:19 +0000 (16:51 -0700)]
Merge remote branch 'common/android-2.6.36' into android-tegra-2.6.36

13 years agonet: ppp: Reduce GFP_ATOMIC memory usage
Benoit Goby [Mon, 14 Mar 2011 22:25:15 +0000 (15:25 -0700)]
net: ppp: Reduce GFP_ATOMIC memory usage

100% of the time on stingray, only 1 skb is allocated in the
ppp_async_input loop. Pre-allocate this skb out of atomic context.

Change-Id: Iee2dd42087ea932ced589273f0cd4796711725c7
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoUSB: gadget: f_accessory: Add string for accessory's unique serial number
Mike Lockwood [Mon, 14 Mar 2011 22:28:55 +0000 (18:28 -0400)]
USB: gadget: f_accessory: Add string for accessory's unique serial number

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years ago[ARM] tegra: stingray: change display EMC clock rate
James Wylder [Fri, 11 Mar 2011 20:42:56 +0000 (14:42 -0600)]
[ARM] tegra: stingray: change display EMC clock rate

With the nVidia recommended clock rates of 300, 150,
and 50, the current value (400000000 internal rate or
200 MHz external clock rate) will round up to full speed
rather than use the intended middle rate(300000000 or
150 MHz external memory).

This saves 10 mA at the battery, when the display is
on but during low work loads.

Change-Id: I291d758166a0e3747163c1831933da01fadb8e69
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoUSB: gadget: f_accessory: Clear disconnected flag when driver file is opened
Mike Lockwood [Sun, 13 Mar 2011 02:35:28 +0000 (21:35 -0500)]
USB: gadget: f_accessory: Clear disconnected flag when driver file is opened

Fixes a race condition that can occur when entering accessory mode.

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agoUSB: gadget: f_accessory: Clear previous strings on ACCESSORY_GET_PROTOCOL
Mike Lockwood [Sun, 13 Mar 2011 00:59:12 +0000 (19:59 -0500)]
USB: gadget: f_accessory: Clear previous strings on ACCESSORY_GET_PROTOCOL

Clearing strings on disconnect does not work since we may receive
a disconnect on some devices when transitioning into accessory mode.
We require an accessory to send ACCESSORY_GET_PROTOCOL before
sending any strings, so any strings from a previous session will be cleared.

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agoUSB: gadget: f_accessory: Clear accessory strings when USB is disconnected
Mike Lockwood [Thu, 10 Mar 2011 21:12:49 +0000 (16:12 -0500)]
USB: gadget: f_accessory: Clear accessory strings when USB is disconnected

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agonet: wireless: bcm4329: Allocate skb with GFP_KERNEL flag if possible
Dmitry Shmidt [Thu, 10 Mar 2011 18:18:39 +0000 (10:18 -0800)]
net: wireless: bcm4329: Allocate skb with GFP_KERNEL flag if possible

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
13 years agoUSB: gadget: f_accessory: Misc improvements and cleanup:
Mike Lockwood [Thu, 10 Mar 2011 02:48:20 +0000 (21:48 -0500)]
USB: gadget: f_accessory: Misc improvements and cleanup:

- Add URI string

- Replace type string with a description string

- Add a control call to retrieve accessory protocol version (currently 1)

- Driver read() and write() calls now fail after USB disconnect until
  driver file is closed and reopened.

- Misc cleanup work

Signed-off-by: Mike Lockwood <lockwood@android.com>
13 years agonet: wireless: bcm4329: Disable wake irq at driver stop
Dmitry Shmidt [Thu, 10 Mar 2011 00:52:08 +0000 (16:52 -0800)]
net: wireless: bcm4329: Disable wake irq at driver stop

Previously at driver stop interrupts were not disabled and
might cause never-ending waking up

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
13 years ago[ARM]: tegra: enable gyro interrupts
makarand.karvekar [Fri, 4 Mar 2011 20:19:01 +0000 (14:19 -0600)]
[ARM]: tegra: enable gyro interrupts

initial ODR set at 100Hz
enable DRDY (data ready) interrupt in gyro
enable Block Data Update (BDU)

Change-Id: I5cd5762644aeb90db4fe66259fe0edb8324d941b
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agomisc: gyro: interrupt based gyro data read and report
makarand.karvekar [Sat, 5 Mar 2011 21:47:30 +0000 (15:47 -0600)]
misc: gyro: interrupt based gyro data read and report

gyro ODR set at 100/200/400/800 Hz
closest to requested delay.
gyro data read and reported at every interrupt.
Reported rate matches the gyro ODR rate

Change-Id: I754ea31054d73863b0512607abe81f1f1dcea367
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agonet: usb: qcusbnet: Radio not supports SetControlLineState
Benoit Goby [Wed, 9 Mar 2011 20:46:18 +0000 (12:46 -0800)]
net: usb: qcusbnet: Radio not supports SetControlLineState

Change-Id: I68a751798236be0e7f7ddd54509eeac1005d953e
Signed-off-by: Srinivas Gowrishetty <srinivas.gowrishetty@motorola.com>
13 years agoARM: tegra: stingray: Add CONFIG_JOYSTICK_XPAD
Jeff Brown [Fri, 4 Mar 2011 21:42:02 +0000 (13:42 -0800)]
ARM: tegra: stingray: Add CONFIG_JOYSTICK_XPAD

13 years agoMerge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36
Rebecca Schultz Zavin [Tue, 8 Mar 2011 20:26:45 +0000 (12:26 -0800)]
Merge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36
Rebecca Schultz Zavin [Tue, 8 Mar 2011 20:22:31 +0000 (12:22 -0800)]
Merge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agoRevert "Revert "tegra: host: move stale wait checking into the kernel""
Rebecca Schultz Zavin [Tue, 8 Mar 2011 20:15:30 +0000 (12:15 -0800)]
Revert "Revert "tegra: host: move stale wait checking into the kernel""

This reverts commit b3cc1d84d0b962fe80fc297d2e2417c3157508b6.

13 years agomdm6600: Fix possible use after free
Benoit Goby [Fri, 4 Mar 2011 22:01:56 +0000 (14:01 -0800)]
mdm6600: Fix possible use after free

If a disconnect happens while the ril runs a tiocmset ioctl, the usb
interface will get freed. Then before returning, autopm_put_interface
will access the interface struct after it has been freed. Get an
interface reference to prevent it from being freed before the tty
has been released.

Change-Id: Ia009995c3fcdfa2e590b36e0c413433ea5f97b59
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: stingray: usbnet: sysfs attribute to identify BLAN
Kazuhiro Ondo [Thu, 3 Mar 2011 23:33:56 +0000 (17:33 -0600)]
ARM: tegra: stingray: usbnet: sysfs attribute to identify BLAN

This is to help user spece modules to identify Motorola BLAN
networking device. Work around the issue of getting semi-random
interface number depending on the boot-up configuration.

Change-Id: Ib2b16699239a16da960c33ef98bbee84bde71dec
Signed-off-by: Kazuhiro Ondo <kazuhiro.ondo@motorola.com>
13 years ago[ARM]: tegra: stingray: set backlight scaling factor
makarand.karvekar [Fri, 4 Mar 2011 16:10:13 +0000 (10:10 -0600)]
[ARM]: tegra: stingray: set backlight scaling factor

set backlight scaling factor based on display panel.
AUO scaling at 726 makes it bit more brighter

Change-Id: I568ff158f00260894d95c00ac1e96632e2636d58
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agoleds: lp8550: get backlight scaling factor from platform data
makarand.karvekar [Fri, 4 Mar 2011 16:01:37 +0000 (10:01 -0600)]
leds: lp8550: get backlight scaling factor from platform data

backlight scaling factor varies with display panel

Change-Id: I45ea0d76526d4297412d177481acded082ce7104
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agonet: usb: qcusbnet: Fix kernel panic on probe/disconnect
Benoit Goby [Thu, 3 Mar 2011 23:02:40 +0000 (15:02 -0800)]
net: usb: qcusbnet: Fix kernel panic on probe/disconnect

Use list_for_each_safe since the loop kfree the current list entry.

If qc_register fails, probe calls qc_deregister. qc_deregister accesses
the cdev struct, so make sure it has been initialized before returning
from qc_register.

Fix missing spin_unlock_irqrestore

Change-Id: I56db6ffaa0c7b258d383d0a6211f63318fa9c08f
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: stingray: Update Memory tables
James Wylder [Thu, 3 Mar 2011 18:25:52 +0000 (12:25 -0600)]
ARM: tegra: stingray: Update Memory tables

Change all rates to integer multipliers, and
Add table for 40nm Elpida

Change-Id: Ie3a4e47948f541326da664537604e2c3061e3a92
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoARM: tegra: stingray: use generic memory vendor matching
James Wylder [Wed, 2 Mar 2011 18:39:50 +0000 (12:39 -0600)]
ARM: tegra: stingray: use generic memory vendor matching

Initialize arrays to utilize new signature of tegra_init_emc.
Memory types are matched internally and command line
option is no longer needed.

Change-Id: Icc7d44e4a82031638c78eeac3b172b713e0ca97b
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoMerge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36
Colin Cross [Fri, 4 Mar 2011 02:55:51 +0000 (18:55 -0800)]
Merge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36
Colin Cross [Fri, 4 Mar 2011 02:55:38 +0000 (18:55 -0800)]
Merge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agoARM: tegra: add generic memory vendor matching
James Wylder [Tue, 1 Mar 2011 15:25:06 +0000 (09:25 -0600)]
ARM: tegra: add generic memory vendor matching

Update tegra_init_emc to provide generic memory
vendor matching.  Read values from EMC_MRR_0, to
uniquely identify memory types and compare them
to table of memory passed in.

Change-Id: Ie116fa6f497076149c87ff6c0ae0621309bac65f
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoARM: tegra: Use readl/writel_relaxed for reset
Colin Cross [Wed, 2 Mar 2011 20:34:38 +0000 (12:34 -0800)]
ARM: tegra: Use readl/writel_relaxed for reset

tegra_assert_system_reset is called after the cache is disabled.
Calling writel will cause the PL310 store buffers to be drained,
which requires taking a spinlock.  Taking a spinlock is not safe
after the caches are disabled.  Convert to readl_relaxed and
writel_relaxed.

Change-Id: I6850179b931ca865580c0fd3fe003b46bdfa43ae
Signed-off-by: Colin Cross <ccross@android.com>
13 years ago[ARM]: tegra: stingray: update ABS x,y max/min values to 0-base
makarand.karvekar [Thu, 3 Mar 2011 01:48:35 +0000 (19:48 -0600)]
[ARM]: tegra: stingray: update ABS x,y max/min values to 0-base

Change-Id: I40e40c843ca732980d454aba721b338ee2e78f4d
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years ago[ARM]: tegra: stingray: update ALS interrupt delay to 400mS
makarand.karvekar [Tue, 22 Feb 2011 23:13:36 +0000 (17:13 -0600)]
[ARM]: tegra: stingray: update ALS interrupt delay to 400mS

Change-Id: Ib8ac11ed7397df1c65097a7d341c29b80c1aafeb
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agomisc: kxtf9: corrected cancel work sync call for delayed work
makarand.karvekar [Tue, 22 Feb 2011 23:21:10 +0000 (17:21 -0600)]
misc: kxtf9: corrected cancel work sync call for delayed work

Change-Id: Iec914fd1102b8b6dba5d9b818b6eacb0d6481187
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agomisc: amk8975: correct y-axis and orientation status reporting
makarand.karvekar [Wed, 23 Feb 2011 00:07:18 +0000 (18:07 -0600)]
misc: amk8975: correct y-axis and orientation status reporting

y-axis: REL_WHEEL
orientation status: REL_HWHEEL

Change-Id: I1268b4cffe281b8871be6a34856cab21f4ca3da3
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
13 years agoMerge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36
Rebecca Schultz Zavin [Thu, 3 Mar 2011 22:30:35 +0000 (14:30 -0800)]
Merge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36
Rebecca Schultz Zavin [Thu, 3 Mar 2011 22:29:26 +0000 (14:29 -0800)]
Merge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agoRevert "tegra: host: move stale wait checking into the kernel"
Rebecca Schultz Zavin [Thu, 3 Mar 2011 22:28:07 +0000 (14:28 -0800)]
Revert "tegra: host: move stale wait checking into the kernel"

This reverts commit 2d49bf33f3885aab293f12d54447f66e911e3226.

13 years agoARM: tegra: stingray: Add CONFIG_USB_NET_GOBI
Benoit Goby [Wed, 2 Mar 2011 01:48:31 +0000 (17:48 -0800)]
ARM: tegra: stingray: Add CONFIG_USB_NET_GOBI

Change-Id: I6e62613f3092578f62af0b87660ffd153e7b2d1e

13 years agonet: usb: qcusbnet: Add support for poll/select
Benoit Goby [Mon, 28 Feb 2011 22:27:22 +0000 (14:27 -0800)]
net: usb: qcusbnet: Add support for poll/select

Change-Id: I974c3e0337b3c4eebd821919966979e670c93b6b
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agonet: usb: qcusbnet: Add support for stingray modem
Benoit Goby [Fri, 25 Feb 2011 04:04:17 +0000 (20:04 -0800)]
net: usb: qcusbnet: Add support for stingray modem

1. Implement reset_resume
2. Remove hardcoding of qmi to interface 0
3. Correctly assign bulk in and out endpoints
4. Change ethernet interface name from usbX to qmiX to remove conflicts with other drivers
5. Assign individual MAC address to each ethernet interface
6. Modify the usb device table to include subclass interface ids for motorola products
7. Remove any hardcoded interface, endpoint numbers

Change-Id: I3b08a5b0acb841e38177cdd758a16f32913246bb
Signed-off-by: Srinivas Gowrishetty <srinivas.gowrishetty@motorola.com>
13 years agoMerge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36
Rebecca Schultz Zavin [Thu, 3 Mar 2011 01:41:04 +0000 (17:41 -0800)]
Merge remote branch 'tegra/android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36
Rebecca Schultz Zavin [Thu, 3 Mar 2011 01:31:34 +0000 (17:31 -0800)]
Merge remote branch 'tegra/linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agotegra: host: move stale wait checking into the kernel
Prajakta Gudadhe [Sat, 5 Feb 2011 09:37:38 +0000 (01:37 -0800)]
tegra: host: move stale wait checking into the kernel

The kernel now receives wait tracking data (similar to gathers and
relocs) and compares the current syncpt with the threshold value.

If it's old, it gets a kernel mapping and rewrites the method data
to use a kernel reserved syncpt that is always 0 (so trivially pops
when seen by the HW).

Patch has dependency to the user-space patches

Submitted on behalf of: Chris Johnson <cjohnson@nvidia.com>
original work by: Chris Johnson <cjohnson@nvidia.com>

Change-Id: I4d4e5d3b49cab860485c4172f87247f5b4f5ea6e

13 years agomdm6600: Match subclass interface info during probe
Benoit Goby [Wed, 2 Mar 2011 01:53:14 +0000 (17:53 -0800)]
mdm6600: Match subclass interface info during probe

Change-Id: I0c17747b51a888e53b29cef4c409da2d67733ae1
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: serial: Add new motoflash pid for wrigley
James Wylder [Wed, 2 Mar 2011 21:18:59 +0000 (15:18 -0600)]
usb: serial: Add new motoflash pid for wrigley

Add the updated wrigley datacard pid to the
list of flashable devices.

Change-Id: I44c0dc1d64136003eeb50df436f20e7765f058dc
Signed-off-by: James Wylder <james.wylder@motorola.com>
13 years agoARM: tegra: stingray: Change wifi-only devices product name
Benoit Goby [Wed, 2 Mar 2011 04:04:37 +0000 (20:04 -0800)]
ARM: tegra: stingray: Change wifi-only devices product name

Change-Id: I2f3b0176115b0f52345c61c02359ee6cb62e907f
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: stingray: Moved tegra_usb.h to linux/platform_data
Benoit Goby [Wed, 2 Mar 2011 01:07:58 +0000 (17:07 -0800)]
ARM: tegra: stingray: Moved tegra_usb.h to linux/platform_data

Change-Id: Iee9df4021ffa82eb5f8f4915072466f0ab20cb89
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: otg: cpcap: Moved tegra_usb.h to linux/platform_data
Benoit Goby [Wed, 2 Mar 2011 01:05:47 +0000 (17:05 -0800)]
usb: otg: cpcap: Moved tegra_usb.h to linux/platform_data

Change-Id: Id745ee5684f079b09f5076a4453f4f925ddc1210
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: stingray_defconfig: Renamed CONFIG_USB_EHCI_TEGRA
Benoit Goby [Sat, 12 Feb 2011 03:52:04 +0000 (19:52 -0800)]
ARM: tegra: stingray_defconfig: Renamed CONFIG_USB_EHCI_TEGRA

Change-Id: I81e3a0221e04280155e2523e954d9b4bcd1b8066
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoMerge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36
Colin Cross [Wed, 2 Mar 2011 01:27:10 +0000 (17:27 -0800)]
Merge branch 'android-tegra-2.6.36' into android-tegra-moto-2.6.36

13 years agoMerge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36
Colin Cross [Wed, 2 Mar 2011 01:26:56 +0000 (17:26 -0800)]
Merge branch 'linux-tegra-2.6.36' into android-tegra-2.6.36

13 years agousb: host: Renamed USB_TEGRA_HCD -> USB_EHCI_TEGRA
Benoit Goby [Tue, 1 Mar 2011 01:45:34 +0000 (17:45 -0800)]
usb: host: Renamed USB_TEGRA_HCD -> USB_EHCI_TEGRA

Change-Id: I2eec79186d6dc258caa2f3c8f3cd071222d1c5c7
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: select USB_ARCH_HAS_EHCI
Benoit Goby [Fri, 11 Feb 2011 02:47:46 +0000 (18:47 -0800)]
ARM: tegra: select USB_ARCH_HAS_EHCI

usb_phy now depends on USB_ULPI_VIEWPORT

Change-Id: I5f3c996b41b50e74aa2b53eb246e100926108bff
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: do not force select has_ehci for tegra
Benoit Goby [Fri, 11 Feb 2011 02:47:20 +0000 (18:47 -0800)]
usb: do not force select has_ehci for tegra

Change-Id: If6219a3ba9671a2c4c10b35461e1cc2ffe50ab0a
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: use generic ulpi operations
Benoit Goby [Fri, 11 Feb 2011 23:55:38 +0000 (15:55 -0800)]
ARM: tegra: use generic ulpi operations

Change-Id: I5b56a8a1b10532683accfe885387afb309b26b19
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: otg: Add ulpi viewport access ops
Benoit Goby [Fri, 11 Feb 2011 23:20:43 +0000 (15:20 -0800)]
usb: otg: Add ulpi viewport access ops

Add generic access ops for controllers with a ulpi viewport register
(e.g. Chipidea based controller).

Change-Id: I53d50857d4716f8df708af199ad1def1ff9d4beb
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: host: tegra: Cleanup before sending upstream
Benoit Goby [Tue, 8 Feb 2011 02:40:47 +0000 (18:40 -0800)]
usb: host: tegra: Cleanup before sending upstream

Change-Id: I846d43b1ecbe6c726f024b6a0fb318d6300a3746
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: usb_phy: Fix return values
Benoit Goby [Fri, 11 Feb 2011 01:41:00 +0000 (17:41 -0800)]
ARM: tegra: usb_phy: Fix return values

Changed frequency table into a struct

Change-Id: I202f808b912ce61e1f804103ea6d1197a57c1e62
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoARM: tegra: usb_phy: Cleanup before sending upstream
Benoit Goby [Tue, 8 Feb 2011 03:23:25 +0000 (19:23 -0800)]
ARM: tegra: usb_phy: Cleanup before sending upstream

Change-Id: I2548ca931f8ae37757115b7753d520d576bb173d
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: otg: tegra: Moved tegra_usb.h to include/linux/platform_data
Benoit Goby [Wed, 2 Mar 2011 01:03:51 +0000 (17:03 -0800)]
usb: otg: tegra: Moved tegra_usb.h to include/linux/platform_data

Change-Id: I201b6476979f6e1ef8ffadb4398b99a1728f3083
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agousb: host: Moved tegra_usb.h to include/linux/platform_data
Benoit Goby [Wed, 2 Mar 2011 00:58:44 +0000 (16:58 -0800)]
usb: host: Moved tegra_usb.h to include/linux/platform_data

Change-Id: Ic093d07858eb6e27aae9cd04d4c59407b5b1d76d
Signed-off-by: Benoit Goby <benoit@android.com>
13 years agoRevert "usb: host: ehci-hcd: add controller_resets_phy quirk"
Benoit Goby [Tue, 1 Mar 2011 01:40:54 +0000 (17:40 -0800)]
Revert "usb: host: ehci-hcd: add controller_resets_phy quirk"

This reverts commit 2c7d591aa11086ba841f8712b7cee33e245b62f6.

Change-Id: Ic9994dafc424e16d5d8251c287f8be65832b611b