firefly-linux-kernel-4.4.55.git
10 years agomfd: pm8921: Fixup probe() error path when irq invalid
Josh Cartwright [Wed, 5 Mar 2014 19:34:25 +0000 (13:34 -0600)]
mfd: pm8921: Fixup probe() error path when irq invalid

platform_get_irq() returns a negative error code when an IRQ is invalid
or unspecified.  Make 'irq' signed to properly handle this.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: da9055: Add DT support for PMIC
Adam Thomson [Wed, 5 Mar 2014 14:18:35 +0000 (14:18 +0000)]
mfd: da9055: Add DT support for PMIC

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: vexpress: Staticize vexpress_config_bridges
Sachin Kamat [Tue, 4 Mar 2014 09:41:47 +0000 (15:11 +0530)]
mfd: vexpress: Staticize vexpress_config_bridges

vexpress_config_bridges is local to this file.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: as3722: Make FUSE7_REG readable
Stephen Warren [Tue, 4 Mar 2014 16:50:32 +0000 (09:50 -0700)]
mfd: as3722: Make FUSE7_REG readable

The FUSE7_REG register is not currently marked readable. This causes
as3722_sd0_is_low_voltage() to emit an error during boot, and assume
the range of the SD0 regulator:

as3722-regulator as3722-regulator: Reg 0xa7 read failed: -5

Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read")
  [exposed the bug, by checking for readability]
Fixes: 762a8ee80897 ("regulator: as3722: detect SD0 low-voltage mode")
  [left out this register from the readable list]

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8921: Use IRQCHIP_SKIP_SET_WAKE
Stephen Boyd [Tue, 4 Mar 2014 18:48:52 +0000 (10:48 -0800)]
mfd: pm8921: Use IRQCHIP_SKIP_SET_WAKE

We don't need to implement a dummy irq_set_wake op if we just set
IRQCHIP_SKIP_SET_WAKE.

Suggested-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8921: Drop irq_set_lockdep_class() code
Stephen Boyd [Tue, 4 Mar 2014 18:48:51 +0000 (10:48 -0800)]
mfd: pm8921: Drop irq_set_lockdep_class() code

This isn't necessary as we aren't setting the summary interrupt
to wake up the system in the irq_wake() callback.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: mc13xxx: Add missing spi_setup()
Alexander Shiyan [Sun, 2 Mar 2014 07:44:34 +0000 (11:44 +0400)]
mfd: mc13xxx: Add missing spi_setup()

The probe routine should call spi_setup() to configure the SPI bus
so it can properly communicate with the device.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: mc13xxx: Limit maximum SPI speed
Alexander Shiyan [Sun, 2 Mar 2014 07:44:33 +0000 (11:44 +0400)]
mfd: mc13xxx: Limit maximum SPI speed

The patch adds the maximum speed limit in accordance with the
PMIC datasheet if other value is not given in the devicetree
description or board data.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: timberdale: Use pci_enable_msix_exact() instead of pci_enable_msix()
Alexander Gordeev [Fri, 21 Feb 2014 16:58:09 +0000 (17:58 +0100)]
mfd: timberdale: Use pci_enable_msix_exact() instead of pci_enable_msix()

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: ucb1x00-core: Use SIMPLE_DEV_PM_OPS macro
Jingoo Han [Thu, 27 Feb 2014 11:39:18 +0000 (20:39 +0900)]
mfd: ucb1x00-core: Use SIMPLE_DEV_PM_OPS macro

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: devicetree: bindings: Document PM8921/8058 PMICs
Stephen Boyd [Wed, 26 Feb 2014 18:59:26 +0000 (10:59 -0800)]
mfd: devicetree: bindings: Document PM8921/8058 PMICs

PM8921 and PM8058 are PMICs found paired with MSM8960 and MSM8660
devices respectively. They contain subdevices such as keypads,
RTC, regulators, clocks, etc.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8921: Loosen Kconfig dependency
Stephen Boyd [Wed, 26 Feb 2014 18:59:25 +0000 (10:59 -0800)]
mfd: pm8921: Loosen Kconfig dependency

Allow this driver to be compiled on all ARM builds as it doesn't
rely on anything within arm/mach-msm.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8921: Add DT match table
Stephen Boyd [Wed, 26 Feb 2014 18:59:24 +0000 (10:59 -0800)]
mfd: pm8921: Add DT match table

Allow this driver to probe based on devicetree.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8921: Use ssbi regmap
Stephen Boyd [Wed, 26 Feb 2014 18:59:23 +0000 (10:59 -0800)]
mfd: pm8921: Use ssbi regmap

Use a regmap so that the pm8xxx read/write APIs can be removed
once all consumer drivers are converted.

Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: ssbi: Add regmap read/write helpers
Stephen Boyd [Wed, 26 Feb 2014 18:59:22 +0000 (10:59 -0800)]
mfd: ssbi: Add regmap read/write helpers

Add read and write helper functions that the pm8921-core driver
can use to read and write ssbi registers via a "no-bus" regmap.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8921: Migrate to irqdomains
Stephen Boyd [Wed, 26 Feb 2014 18:59:21 +0000 (10:59 -0800)]
mfd: pm8921: Migrate to irqdomains

Convert this driver to use irqdomains so that the PMIC's child
devices can be converted to devicetree.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
10 years agomfd: pm8921: Update for genirq changes
Stephen Boyd [Wed, 26 Feb 2014 18:59:20 +0000 (10:59 -0800)]
mfd: pm8921: Update for genirq changes

Since this code has been marked broken for some time a few genirq
tree wide changes weren't made. set_irq_wake() was renamed to
irq_set_irq_wake() in commit a0cd9ca2b (genirq: Namespace
cleanup, 2011-02-10) and commit 10a8c383 (irq: introduce entry
and exit functions for chained handlers) introduced the chained
irq functions but this driver wasn't updated to use them. Fix
these problems and remove the BROKEN marking on this driver.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: pm8xxx: Move pm8xxx-irq.c contents into only driver that uses it
Stephen Boyd [Wed, 26 Feb 2014 18:59:19 +0000 (10:59 -0800)]
mfd: pm8xxx: Move pm8xxx-irq.c contents into only driver that uses it

The pm8xxx-irq.c code is practically mandatory given that the
pm8921-core driver will WARN about it missing and the Kconfig
marks it as default y when a PM8xxx chips is enabled. The only
reason the file was split out was because we planned to support
other pm8xxx chips with different pm8xxx-core.c files. Now that
we have DT on ARM this isn't necessary because we should be able
to support all the ssbi based PM8xxx chips in one driver and one
file with no data bloat. Let's move this code into the only
driver that uses it right now (pm8921) so that it's always compiled when
needed. In the future we can rename pm8921-core.c to something
more generic.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl6040: Check for error when reading revision register
Florian Vaussard [Tue, 25 Feb 2014 13:28:19 +0000 (14:28 +0100)]
mfd: twl6040: Check for error when reading revision register

We may have an error when reading the revision register, so check for
the returned value.

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl6040: Remove duplicate register write
Florian Vaussard [Tue, 25 Feb 2014 13:28:20 +0000 (14:28 +0100)]
mfd: twl6040: Remove duplicate register write

When probing, regmap_register_patch() will bypass the cache and perform
i2c writes for the given patches. It is thus unnecessary to manually set
the TWL6040_REG_ACCCTL register just before, as it will be done when
registering the twl6040_patch.

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: da9052: Extend support to a new chip
Opensource [Anthony Olech] [Wed, 19 Feb 2014 16:32:46 +0000 (16:32 +0000)]
mfd: da9052: Extend support to a new chip

Add the hash define for the new variant of the DA9053 PMIC called BC.

Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: da9052: Add new DA9053 BC chip variant
Opensource [Anthony Olech] [Wed, 19 Feb 2014 16:32:47 +0000 (16:32 +0000)]
mfd: da9052: Add new DA9053 BC chip variant

Add support for a new BC variant of the DA9053 PMIC.

There is one difference between it and the AA, BA and BB.

This patch also corrects a typing mistake in one of the BA
name strings that was incorrectly typed as "ab".

Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: syscon: Move diagnostic messages to dev_dbg()
Alexander Shiyan [Sat, 22 Feb 2014 06:02:25 +0000 (10:02 +0400)]
mfd: syscon: Move diagnostic messages to dev_dbg()

This patch moves diagnostic messages used for debugging purposes
to dev_dbg().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: kempld: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver
Michael Brunner [Mon, 24 Feb 2014 07:53:46 +0000 (08:53 +0100)]
mfd: kempld: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver

This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
the module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agogpio: ich: Add support for Intel Avoton
Vincent Donnefort [Fri, 14 Feb 2014 14:01:58 +0000 (15:01 +0100)]
gpio: ich: Add support for Intel Avoton

This patch adds support for Atom C2000 series (Avoton and Rangeley). And has
the following options:
  - New addresses register.
  - Caching output levels (see Intel external design spec, table 48-29)
  - No hardware blink.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agogpio: ich: Add output levels cache support
Vincent Donnefort [Fri, 14 Feb 2014 14:01:57 +0000 (15:01 +0100)]
gpio: ich: Add output levels cache support

This patch allows GPIO driver to cache GPIO_LVL output registers. The aim is to
support chipsets on which GPIO_LVL value can't be read for output pins.

Caching output levels implies the first output values reading as 0. The driver
so can't be aware of set values GPIOs by bootloader or BIOS.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agogpio: ich: Add support for multiple register addresses
Vincent Donnefort [Fri, 14 Feb 2014 14:01:56 +0000 (15:01 +0100)]
gpio: ich: Add support for multiple register addresses

This patch introduces regs and reglen pointers which allow a chipset to have
register addresses differing from ICH ones.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agogpio: ich: Add blink capability option
Vincent Donnefort [Fri, 14 Feb 2014 14:01:55 +0000 (15:01 +0100)]
gpio: ich: Add blink capability option

This patch allows gpio_ich driver to be aware of non blink capable chipsets.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: lpc_ich: Add support for Intel Avoton GPIOs
Vincent Donnefort [Fri, 14 Feb 2014 14:01:54 +0000 (15:01 +0100)]
mfd: lpc_ich: Add support for Intel Avoton GPIOs

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: lpc_ich: Convert ICH GPIOs IDs to enum
Vincent Donnefort [Fri, 14 Feb 2014 14:01:53 +0000 (15:01 +0100)]
mfd: lpc_ich: Convert ICH GPIOs IDs to enum

All those IDs are arbitrary and so can be encapsulated into an enumeration.

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: da9063: Add support for production silicon variant code
Opensource [Steve Twiss] [Fri, 14 Feb 2014 14:08:11 +0000 (14:08 +0000)]
mfd: da9063: Add support for production silicon variant code

Add the correct silicon variant code ID (0x5) to the driver. This
new code is the 'production' variant code ID for DA9063.

This patch will remove the older variant code ID which matches the
pre-production silicon ID (0x3) for the DA9063 chip.

There is also some small amount of correction done in this patch:
it splits the revision code and correctly names it according to
the hardware specification and moves the dev_info() call before
the variant ID test.

Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: wm8400-core: Remove unnecessary goto
Sachin Kamat [Fri, 14 Feb 2014 09:51:05 +0000 (15:21 +0530)]
mfd: wm8400-core: Remove unnecessary goto

Return directly to avoid redundant lines of code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: Add realtek USB card reader driver
Roger Tseng [Wed, 12 Feb 2014 10:00:36 +0000 (18:00 +0800)]
mfd: Add realtek USB card reader driver

Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: stw481x: Check the return value of devm_regmap_init_i2c
Sachin Kamat [Wed, 12 Feb 2014 09:10:13 +0000 (14:40 +0530)]
mfd: stw481x: Check the return value of devm_regmap_init_i2c

devm_regmap_init_i2c can fail. Check for it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: stw481x: Staticize stw481x_regmap_config
Sachin Kamat [Wed, 12 Feb 2014 09:10:12 +0000 (14:40 +0530)]
mfd: stw481x: Staticize stw481x_regmap_config

stw481x_regmap_config is local to this file.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max14577: Include missing err.h
Sachin Kamat [Wed, 12 Feb 2014 09:10:11 +0000 (14:40 +0530)]
mfd: max14577: Include missing err.h

Add this header explicitly for IS_ERR and friends.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: vexpress-sysreg: Initialize 'site' variable
Semen Protsenko [Thu, 13 Feb 2014 16:39:54 +0000 (18:39 +0200)]
mfd: vexpress-sysreg: Initialize 'site' variable

'site' variable should be initialized with 0 so that when 'site'
property doesn't exist in DTB it can be handled correctly.

'0' value means board site number is motherboard (see
Documentation/devicetree/bindings/arm/vexpress.txt for details).

Signed-off-by: Semen Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: 88pm800: Fix I2C device resource leak if probe fails
Krzysztof Kozlowski [Wed, 12 Feb 2014 10:10:56 +0000 (11:10 +0100)]
mfd: 88pm800: Fix I2C device resource leak if probe fails

During probe the driver allocates two dummy I2C devices for subchips in
function pm800_pages_init(). Additionally this function allocates
regmaps for these subchips. If any of these steps fail then these dummy
I2C devices are not freed and resources leak.

On pm800_pages_init() fail the driver must call pm800_pages_exit() to
unregister dummy I2C devices.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: Trivial: Fix a grammar issues in MFD Kconfig
Laszlo Papp [Tue, 11 Feb 2014 04:50:51 +0000 (04:50 +0000)]
mfd: Trivial: Fix a grammar issues in MFD Kconfig

s/to support for/to add support for/

Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: ti_am335x_tscadc: Use devm_ioremap_resource()
Jingoo Han [Wed, 12 Feb 2014 05:31:49 +0000 (14:31 +0900)]
mfd: ti_am335x_tscadc: Use devm_ioremap_resource()

Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: da9052: Fix volatile register definition ommissions
anthony.olech.opensource@diasemi.com [Thu, 6 Feb 2014 17:33:24 +0000 (17:33 +0000)]
mfd: da9052: Fix volatile register definition ommissions

Three of the PMIC registers have some bits that are changed
autonomously by the PMIC itself (some time) after being set
by some component driver of the DA9052 PMIC and hence they
need to be marked as volatile so that the regmap API will
not cache their values.

Acked-by: David Dajun Chen <david.chen@diasemi.com>
Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max77693: Fix possible NULL pointer dereference on i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:32 +0000 (11:03 +0100)]
mfd: max77693: Fix possible NULL pointer dereference on i2c_new_dummy error

During probe the driver allocates dummy I2C devices for MUIC and haptic
with i2c_new_dummy() but it does not check the return value of this
calls.

In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by devm_regmap_init_i2c() and i2c_unregister_device().

If i2c_new_dummy() fails for MUIC or haptic devices, fail also the probe
for main MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: 88pm860x: Fix possible NULL pointer dereference on i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:29 +0000 (11:03 +0100)]
mfd: 88pm860x: Fix possible NULL pointer dereference on i2c_new_dummy error

During probe the driver allocates dummy I2C device for companion chip
with i2c_new_dummy() but it does not check the return value of this call.

In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by regmap_init_i2c().

If i2c_new_dummy() fails for companion device, fail also the probe for
main MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: 88pm860x: Fix I2C device resource leak on regmap init fail
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:30 +0000 (11:03 +0100)]
mfd: 88pm860x: Fix I2C device resource leak on regmap init fail

During probe the driver allocates dummy I2C device for companion chip
and then allocates a regmap for it. If regmap_init_i2c() fails then the
I2C driver (allocated with i2c_new_dummy()) is not freed and this
resource leaks.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:33 +0000 (11:03 +0100)]
mfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy error

During probe the driver allocates dummy I2C devices for RTC and ADC
with i2c_new_dummy() but it does not check the return value of this
calls.

In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().

If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe
for main MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:35 +0000 (11:03 +0100)]
mfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy error

During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call.

In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().

If i2c_new_dummy() fails for RTC device, fail also the probe for
main MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max77686: Fix possible NULL pointer dereference on i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:31 +0000 (11:03 +0100)]
mfd: max77686: Fix possible NULL pointer dereference on i2c_new_dummy error

During probe the driver allocates dummy I2C device for RTC with
i2c_new_dummy() but it does not check the return value of this call.

In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().

If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 10:03:34 +0000 (11:03 +0100)]
mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy error

During probe the driver allocates dummy I2C devices for RTC, haptic and
MUIC with i2c_new_dummy() but it does not check the return value of this
calls.

In case of error (i2c_new_device(): memory allocation failure or I2C
address cannot be used) this function returns NULL which is later used
by i2c_unregister_device().

If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the
probe for main MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: Delete non-required instances of include <linux/init.h>
Paul Gortmaker [Tue, 21 Jan 2014 21:23:01 +0000 (16:23 -0500)]
mfd: Delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: stmpe: Trivial: Remove unnecessary semicolon
Sachin Kamat [Tue, 4 Feb 2014 09:07:13 +0000 (14:37 +0530)]
mfd: stmpe: Trivial: Remove unnecessary semicolon

Semicolon is not necessary after the while statement.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: tps65218: Add driver for the TPS65218 PMIC
Keerthy [Thu, 6 Feb 2014 05:50:12 +0000 (11:20 +0530)]
mfd: tps65218: Add driver for the TPS65218 PMIC

The TPS65218 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

 - Regulators.
 - Over Temperature warning and Shut down.

This patch adds support for tps65218 mfd device. At this time only
the regulator functionality is made available.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: tc3589x: Reform device tree probing
Linus Walleij [Thu, 23 Jan 2014 12:43:28 +0000 (13:43 +0100)]
mfd: tc3589x: Reform device tree probing

This changes the following mechanisms in the TC3589x device tree
probing path:

- Use the .of_match_table in struct device_driver to match the
  device in the device tree.
- Add matches for the proper compatible strings "toshiba,..."
  and all sub-variants, just as is done for the .id matches.
- Move over all the allocation of platform data etc to the
  tc3589x_of_probe() function and follow the pattern of passing
  a platform data pointer back, or an error pointer on error,
  as found in the STMPE driver.
- Match the new (proper) compatible strings for the GPIO and
  keypad MFD cells.
- Use of_device_is_compatible() rather than just !strcmp()
  to discover which cells to instantiate.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: wm5110: Make additional DSP registers available to the user
Charles Keepax [Wed, 22 Jan 2014 13:04:24 +0000 (13:04 +0000)]
mfd: wm5110: Make additional DSP registers available to the user

Expose some DSP registers which are useful for DSP users to be able to
access whilst debugging their firmware.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: wm5102: Make additional DSP registers available to the user
Charles Keepax [Wed, 22 Jan 2014 13:04:23 +0000 (13:04 +0000)]
mfd: wm5102: Make additional DSP registers available to the user

Expose some DSP registers which are useful for DSP users to be able to
access whilst debugging their firmware.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max14577: Add of_compatible to extcon mfd_cell
Krzysztof Kozlowski [Tue, 28 Jan 2014 12:18:28 +0000 (13:18 +0100)]
mfd: max14577: Add of_compatible to extcon mfd_cell

Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon
driver. If entry with such compatible is present in the DTS, the extcon
driver will have of_node set.

This may be useful for extcon consumers and it is documented in
bindings documentation.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max14577: Remove not needed header inclusion
Krzysztof Kozlowski [Tue, 28 Jan 2014 12:18:27 +0000 (13:18 +0100)]
mfd: max14577: Remove not needed header inclusion

Remove not needed max14577-private.h header inclusion in the main driver
header. Remove obvious comment.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: max14577: Remove unused enum max14577_irq_source
Krzysztof Kozlowski [Tue, 28 Jan 2014 12:18:26 +0000 (13:18 +0100)]
mfd: max14577: Remove unused enum max14577_irq_source

Remove unused symbol: enum max14577_irq_source.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: Include all drivers in subsystem menu
Linus Walleij [Wed, 29 Jan 2014 10:09:53 +0000 (11:09 +0100)]
mfd: Include all drivers in subsystem menu

It is currently not possible to select the SA1100 or Vexpress
drivers in the MFD subsystem, because the menu for the entire
subsystem ends before these options are presented.

Move the main menu closing and the endif for HAS_IOMEM to the
end of the file so these are selectable again.

Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agoMerge branch 'ib-mfd-io-3.15' into HEAD
Lee Jones [Wed, 19 Mar 2014 08:57:53 +0000 (08:57 +0000)]
Merge branch 'ib-mfd-io-3.15' into HEAD

10 years agoMerge branch 'ib-mfd-omap' into HEAD
Lee Jones [Wed, 19 Mar 2014 08:57:44 +0000 (08:57 +0000)]
Merge branch 'ib-mfd-omap' into HEAD

10 years agoMerge branch 'ib-mfd-regulator-3.15' into HEAD
Lee Jones [Wed, 19 Mar 2014 08:57:33 +0000 (08:57 +0000)]
Merge branch 'ib-mfd-regulator-3.15' into HEAD

10 years agomfd: wm5102: Update register patch
Charles Keepax [Fri, 31 Jan 2014 16:16:17 +0000 (16:16 +0000)]
mfd: wm5102: Update register patch

Update the register patch based on latest evaluation of the device.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agoDocumentation: mfd: Add binding document for S2MPA01
Sachin Kamat [Fri, 14 Mar 2014 11:51:59 +0000 (17:21 +0530)]
Documentation: mfd: Add binding document for S2MPA01

Added initial binding documentation for S2MPA01 MFD.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agoregulator: Add support for S2MPA01 regulator
Sachin Kamat [Fri, 14 Mar 2014 11:51:58 +0000 (17:21 +0530)]
regulator: Add support for S2MPA01 regulator

Add support for S2MPA01 voltage and current regulator.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: Add support for S2MPA01 device
Sachin Kamat [Fri, 14 Mar 2014 11:51:57 +0000 (17:21 +0530)]
mfd: Add support for S2MPA01 device

Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: sec-core: Silence compiler warning
Pankaj Dubey [Thu, 13 Mar 2014 02:14:07 +0000 (11:14 +0900)]
mfd: sec-core: Silence compiler warning

When used 64bit compiler GCC warns as
drivers/mfd/sec-core.c:199:10: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy error
Krzysztof Kozlowski [Tue, 11 Feb 2014 09:12:25 +0000 (10:12 +0100)]
mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy error

During probe the sec-core driver allocates dummy I2C device for RTC with
i2c_new_dummy() but return value is not checked. In case of error
(i2c_new_device(): memory allocation failure or I2C address cannot be
used) this function returns NULL which is later used by
devm_regmap_init_i2c() or i2c_unregister_device().

If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: sec: Add support for S2MPS14
Krzysztof Kozlowski [Fri, 28 Feb 2014 10:41:44 +0000 (11:41 +0100)]
mfd: sec: Add support for S2MPS14

Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexes
Krzysztof Kozlowski [Fri, 28 Feb 2014 10:41:43 +0000 (11:41 +0100)]
mfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexes

The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding
interrupts are named similarly). Use consistent names for interrupts to
limit possible errors.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: sec-core: Select different RTC regmaps for devices
Krzysztof Kozlowski [Fri, 28 Feb 2014 10:41:42 +0000 (11:41 +0100)]
mfd: sec-core: Select different RTC regmaps for devices

This patch prepares for adding support for S2MPS14 RTC driver by
selecting different regmaps for S2MPS1X/S5M876X RTC devices.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: sec-core: Add maximum RTC register for regmap config
Krzysztof Kozlowski [Fri, 28 Feb 2014 10:41:41 +0000 (11:41 +0100)]
mfd: sec-core: Add maximum RTC register for regmap config

Add maximum register to the regmap used by rtc-s5m driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl4030-madc: Move driver to drivers/iio/adc
Sebastian Reichel [Sun, 16 Mar 2014 01:43:31 +0000 (02:43 +0100)]
mfd: twl4030-madc: Move driver to drivers/iio/adc

This is a driver for an A/D converter, which belongs into
drivers/iio/adc.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agoDocumentation: DT: Document twl4030-madc binding
Sebastian Reichel [Sun, 16 Mar 2014 01:43:30 +0000 (02:43 +0100)]
Documentation: DT: Document twl4030-madc binding

Add devicetree binding documentation for twl4030-madc
analog digital converter.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers
Sebastian Reichel [Sun, 16 Mar 2014 01:43:29 +0000 (02:43 +0100)]
mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers

Simplify reading and writing of 16 bit TWL registers in the
driver by using twl_i2c_read_u16 and twl_i2c_write_u16.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl-core: Add twl_i2c_read/write_u16
Sebastian Reichel [Sun, 16 Mar 2014 01:43:28 +0000 (02:43 +0100)]
mfd: twl-core: Add twl_i2c_read/write_u16

Add a simple twl_i2c_read/write_u16 wrapper over
the twl_i2c_read/write, which is similar to the
twl_i2c_read/write_u8 wrapper.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl4030-madc: Cleanup driver
Sebastian Reichel [Sun, 16 Mar 2014 01:43:27 +0000 (02:43 +0100)]
mfd: twl4030-madc: Cleanup driver

Some style fixes in twl4030-madc driver.

Reported-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl4030-madc: Add DT support and convert to IIO framework
Sebastian Reichel [Sun, 16 Mar 2014 01:43:26 +0000 (02:43 +0100)]
mfd: twl4030-madc: Add DT support and convert to IIO framework

This converts twl4030-madc module to use the Industrial IO ADC
framework and adds device tree support.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: twl4030-madc: Use managed resources
Sebastian Reichel [Sun, 16 Mar 2014 01:43:25 +0000 (02:43 +0100)]
mfd: twl4030-madc: Use managed resources

Update twl4030-madc driver to use managed resources.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Tested-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-tll: Update DT clock binding information
Roger Quadros [Thu, 27 Feb 2014 14:18:28 +0000 (16:18 +0200)]
mfd: omap-usb-tll: Update DT clock binding information

The omap-usb-tll driver needs one clock for each TLL channel.
Add this information to the DT binding document.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-host: Update DT clock binding information
Roger Quadros [Thu, 27 Feb 2014 14:18:27 +0000 (16:18 +0200)]
mfd: omap-usb-host: Update DT clock binding information

The omap-usb-host driver expects certained named clocks.
Add this information to the DT binding document.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-host: Use clock names as per function for reference clocks
Roger Quadros [Thu, 27 Feb 2014 14:18:26 +0000 (16:18 +0200)]
mfd: omap-usb-host: Use clock names as per function for reference clocks

Use a meaningful name for the reference clocks so that it indicates the
function.

Update the OMAP4+ USB Host node as well to be in sync with the changes.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-host: Use proper clock name instead of alias
Roger Quadros [Thu, 27 Feb 2014 14:18:25 +0000 (16:18 +0200)]
mfd: omap-usb-host: Use proper clock name instead of alias

Use the proper clock name 'usbhost_120m_fck' instead of the
alias 'ehci_logic_fck'

Get rid of the 'ehci_logic_fck' alias from the OMAP3 hwmod data
as well.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-host: Always fail on clk_get() error
Roger Quadros [Thu, 27 Feb 2014 14:18:24 +0000 (16:18 +0200)]
mfd: omap-usb-host: Always fail on clk_get() error

Be more strict and always fail on clk_get() error.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-host: Get clocks based on hardware revision
Roger Quadros [Thu, 27 Feb 2014 14:18:23 +0000 (16:18 +0200)]
mfd: omap-usb-host: Get clocks based on hardware revision

Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.

This should avoid un-necessary clk_get failure messages that were
observed earlier.

Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.

Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data]
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-host: Use resource managed clk_get()
Roger Quadros [Wed, 12 Feb 2014 10:18:42 +0000 (12:18 +0200)]
mfd: omap-usb-host: Use resource managed clk_get()

Use devm_clk_get() instead of clk_get().

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agomfd: omap-usb-tll: Fix cppcheck sizeof warning
Colin Ian King [Tue, 11 Feb 2014 09:38:53 +0000 (09:38 +0000)]
mfd: omap-usb-tll: Fix cppcheck sizeof warning

Static analysis from cppcheck issued the following warning:

[drivers/mfd/omap-usb-tll.c:255]: (warning) Found calculation
  inside sizeof().

The current size calculation is not obvious and is easy to
miscomprehend, so re-work the size of the allocation based
on the size of the struct pointer and quantity to allocate.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
10 years agoLinux 3.14-rc5
Linus Torvalds [Mon, 3 Mar 2014 02:56:16 +0000 (18:56 -0800)]
Linux 3.14-rc5

10 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Sun, 2 Mar 2014 23:25:45 +0000 (15:25 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
  and tegra fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats
  drm/radeon: enable speaker allocation setup on dce3.2
  drm/radeon: change audio enable logic
  drm/radeon: fix audio disable on dce6+
  drm/radeon: free uvd ring on unload
  drm/radeon: disable pll sharing for DP on DCE4.1
  drm/radeon: fix missing bo reservation
  drm/radeon: print the supported atpx function mask
  MAINTAINERS: update drm git tree entry
  MAINTAINERS: add entry for drm radeon driver
  drm/tegra: Add guard to avoid double disable/enable of RGB outputs
  gpu: host1x: do not check previously handled gathers
  drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'

10 years agoMerge tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sun, 2 Mar 2014 23:15:07 +0000 (15:15 -0800)]
Merge tag 'usb-3.14-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are 2 USB patches for 3.14-rc5, one a new device id, and the
  other fixes a reported problem with threaded irqs and the USB EHCI
  driver"

* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: ehci: fix deadlock when threadirqs option is used
  USB: ftdi_sio: add Cressi Leonardo PID

10 years agoMerge tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 2 Mar 2014 23:13:41 +0000 (15:13 -0800)]
Merge tag 'driver-core-3.14-rc5' of git://git./linux/kernel/git/gregkh/driver-core

Pull sysfs fix from Greg KH:
 "Here is a single sysfs fix for 3.14-rc5.  It fixes a reported problem
  with the namespace code in sysfs"

* tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: fix namespace refcnt leak

10 years agoMerge tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sun, 2 Mar 2014 23:12:54 +0000 (15:12 -0800)]
Merge tag 'staging-3.14-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging tree fixes from Greg KH:
 "Here are a few IIO fixes, and a new device id for a staging driver for
  3.14-rc5.  All have been in linux-next for a while, I did a final
  merge to get the IIO fixes into this tree, they were incorrectly in
  the char-misc tree for a few weeks, and I forgot to tell you to pull
  them from there.  This makes it a single pull request for you"

* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Add new device ID
  staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
  iio:gyro: bug on L3GD20H gyroscope support
  iio: cm32181: Change cm32181 ambient light sensor driver
  iio: cm36651: Fix read/write integration time function.

10 years agoMerge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Sun, 2 Mar 2014 23:04:41 +0000 (09:04 +1000)]
Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

more radeon fixes

* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: enable speaker allocation setup on dce3.2
  drm/radeon: change audio enable logic
  drm/radeon: fix audio disable on dce6+
  drm/radeon: free uvd ring on unload
  drm/radeon: disable pll sharing for DP on DCE4.1
  drm/radeon: fix missing bo reservation
  drm/radeon: print the supported atpx function mask

10 years agoMerge iio fixes into staging-linus
Greg Kroah-Hartman [Sun, 2 Mar 2014 22:04:01 +0000 (14:04 -0800)]
Merge iio fixes into staging-linus

These I forgot about before, but need to get into 3.14-final.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
10 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 2 Mar 2014 17:37:07 +0000 (11:37 -0600)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Misc fixes, most of them on the tooling side"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix strict alias issue for find_first_bit
  perf tools: fix BFD detection on opensuse
  perf: Fix hotplug splat
  perf/x86: Fix event scheduling
  perf symbols: Destroy unused symsrcs
  perf annotate: Check availability of annotate when processing samples

10 years agoMerge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash...
Dave Airlie [Sun, 2 Mar 2014 10:54:31 +0000 (20:54 +1000)]
Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A couple of minor fixes.

Pull request of 2014-03-02

* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats

10 years agodrm/vmwgfx: avoid null pointer dereference at failure paths
Alexey Khoroshilov [Fri, 28 Feb 2014 21:20:18 +0000 (01:20 +0400)]
drm/vmwgfx: avoid null pointer dereference at failure paths

vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
10 years agodrm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
Thomas Hellstrom [Fri, 28 Feb 2014 12:33:21 +0000 (13:33 +0100)]
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.

Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.

Also update driver date.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
10 years agodrm/vmwgfx: Remove some unused surface formats
Thomas Hellstrom [Fri, 28 Feb 2014 12:31:04 +0000 (13:31 +0100)]
drm/vmwgfx: Remove some unused surface formats

These formats are deprecated.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
10 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 2 Mar 2014 04:48:14 +0000 (22:48 -0600)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Peter Anvin:
 "The VMCOREINFO patch I'll pushing for this release to avoid having a
  release with kASLR and but without that information.

  I was hoping to include the FPU patches from Suresh, but ran into a
  problem (see other thread); will try to make them happen next week"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kaslr: add missed "static" declarations
  x86, kaslr: export offset in VMCOREINFO ELF notes

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Linus Torvalds [Sun, 2 Mar 2014 03:33:09 +0000 (21:33 -0600)]
Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
 "The bulk of the series are bugfixes for qla2xxx target NPIV support
  that went in for v3.14-rc1.  Also included are a few DIF related
  fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
  protocol version related fix from Venkatesh.

  Also just a heads up that a series to address a number of issues with
  iser-target active I/O reset/shutdown is still being tested, and will
  be included in a separate -rc6 PULL request"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
  qla2xxx: Fix kernel panic on selective retransmission request
  Target/sbc: Don't use sg as iterator in sbc_verify_read
  target: Add DIF sense codes in transport_generic_request_failure
  target/sbc: Fix sbc_dif_copy_prot addr offset bug
  tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
  tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
  tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
  qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
  qla2xxx: Fix qlt_lport_register base_vha callback race