arm64: mm: fix pmd_write CoW brokenness

Commit 9c7e535fcc17 ("arm64: mm: Route pmd thp functions through pte
equivalents") changed the pmd manipulator and accessor functions to
convert the target pmd to a pte, process it with the pte functions, then
convert it back. Along the way, we gained support for PTE_WRITE, however
this is completely ignored by set_pmd_at, and so we fail to set the
PMD_SECT_RDONLY for PMDs, resulting in all sorts of lovely failures (like
CoW not working).

Partially reverting the offending commit (by making use of
PMD_SECT_RDONLY explicitly for pmd_{write,wrprotect,mkwrite} functions)
leads to further issues because pmd_write can then return potentially
incorrect values for page table entries marked as RDONLY, leading to
BUG_ON(pmd_write(entry)) tripping under some THP workloads.

This patch fixes the issue by routing set_pmd_at through set_pte_at,
which correctly takes the PTE_WRITE flag into account. Given that
THP mappings are always anonymous, the additional cache-flushing code
in __sync_icache_dcache won't impose any significant overhead as the
flush will be skipped.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steve Capper <steve.capper@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit ceb218359de22e70980801d4fa04fffbfc44adb8)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: mm: Route pmd thp functions through pte equivalents

Rather than have separate hugetlb and transparent huge page pmd
manipulation functions, re-wire our thp functions to simply call the
pte equivalents.

This allows THP to take advantage of the new PTE_WRITE logic introduced
in:
  c2c93e5 arm64: mm: Introduce PTE_WRITE

To represent splitting THPs we use the PTE_SPECIAL bit as this is not
used for pmds.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 9c7e535fcc1725fc2e2d4f0d9dd14137f0243e23)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: Fix linker script entry point

Change the arm64 linker script ENTRY() command to define _text as the
kernel entry point.

The arm64 boot protocol specifies that the kernel must be entered at the
beginning of the kernel image.  The existing ENTRY() command defined the
symbol stext as the entry point, which emitted an incorrect entry point,
but would not cause a runtime error because the existing entry code
immediately jumps to stext.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit af885f4022622331f17227dfcfbb2dafdee25a43)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: lib: Implement optimized string length routines

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized strlen() and strnlen() functions.

Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 0a42cb0a6fa64cb17db11164a1ad3511b43acefe)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: lib: Implement optimized string compare routines

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized strcmp() and strncmp() functions.

Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 192c4d902f19b66902d7aacc19e9b169bebfb2e5)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: lib: Implement optimized memcmp routine

This patch, based on Linaro's Cortex Strings library, adds
an assembly optimized memcmp() function.

Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit d875c9b3724083cd2629cd8507e424cd3716cd28)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: lib: Implement optimized memset routine

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memset() function.

Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit b29a51fe0e0be63157d8661666be8bbfd8f0c5d7)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: lib: Implement optimized memmove routine

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memmove() function.

Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 280adc1951c0c9fc8f2d85571ff563a1c412b1cd)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: lib: Implement optimized memcpy routine

This patch, based on Linaro's Cortex Strings library, improves
the performance of the assembly optimized memcpy() function.

Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 808dbac6b51f3441eb5a07724c0b0d1257046d51)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: fix pud_huge() for 2-level pagetables

The following happens when trying to run a kvm guest on a kernel
configured for 64k pages. This doesn't happen with 4k pages:

  BUG: failure at include/linux/mm.h:297/put_page_testzero()!
  Kernel panic - not syncing: BUG!
  CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF            3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1
  Call trace:
  [<fffffe0000096034>] dump_backtrace+0x0/0x16c
  [<fffffe00000961b4>] show_stack+0x14/0x1c
  [<fffffe000066e648>] dump_stack+0x84/0xb0
  [<fffffe0000668678>] panic+0xf4/0x220
  [<fffffe000018ec78>] free_reserved_area+0x0/0x110
  [<fffffe000018edd8>] free_pages+0x50/0x88
  [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40
  [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44
  [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184
  [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c
  [<fffffe00001edc1c>] __fput+0xb0/0x288
  [<fffffe00001ede4c>] ____fput+0xc/0x14
  [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c
  [<fffffe0000095c14>] do_notify_resume+0x54/0x58

In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page()
on the stage2 pgd which leads to the BUG in put_page_testzero(). This
happens because a pud_huge() test in unmap_range() returns true when it
should always be false with 2-level pages tables used by 64k pages.
This patch removes support for huge puds if 2-level pagetables are
being used.

Signed-off-by: Mark Salter <msalter@redhat.com>
[catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # v3.11+
(cherry picked from commit 4797ec2dc83a43be35bad56037d1b53db9e2b5d5)
Signed-off-by: Mark Brown <broonie@kernel.org>

ARM: Check if a CPU has gone offline

PSCIv0.2 adds a new function called AFFINITY_INFO, which
can be used to query if a specified CPU has actually gone
offline. Calling this function via cpu_kill ensures that
a CPU has quiesced after a call to cpu_die. This helps
prevent the CPU from doing arbitrary bad things when data
or instructions are clobbered (as happens with kexec)
in the window between a CPU announcing that it is dead
and said CPU leaving the kernel.

Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit c814ca029e1015bb0ecec312f4bb9751ba1a711a)
Signed-off-by: Mark Brown <broonie@kernel.org>
Conflicts:
arch/arm64/include/asm/cpu_ops.h

ARM: PSCI: remove unnecessary include of arm-gic.h

Now that gic_secondary_init is no longer needed to be called by SMP init
functions, the header is not needed.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
(cherry picked from commit 97fc4de3d93fea934b0ec8332465b9f1899a9adb)
Signed-off-by: Mark Brown <broonie@kernel.org>

ARM: 7745/1: psci: fix building without HOTPLUG_CPU

The cpu_die field in smp_operations is not valid with CONFIG_HOTPLUG_CPU,
so we must enclose it in #ifdef, but at least that lets us remove
two other lines.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit fdeb94b5dc5bf9db7b3e36f3f38089a554f6a108)
Signed-off-by: Mark Brown <broonie@kernel.org>

PSCI: Add initial support for PSCIv0.2 functions

The PSCIv0.2 spec defines standard values of function IDs
and introduces a few new functions. Detect version of PSCI
and appropriately select the right PSCI functions.

Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit e71246a23acbc89e9cb4ebf1558d60e65733479f)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm: introduce psci_smp_ops

Rename virt_smp_ops to psci_smp_ops and move them to arch/arm/kernel/psci_smp.c.
Remove mach-virt/platsmp.c, now unused.
Compile psci_smp if CONFIG_ARM_PSCI and CONFIG_SMP.

Add a cpu_die smp_op based on psci_ops.cpu_off.

Initialize PSCI before setting smp_ops in setup_arch.

If PSCI is available on the platform, prefer psci_smp_ops over the
platform smp_ops.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Will Deacon <will.deacon@arm.com>
CC: arnd@arndb.de
CC: marc.zyngier@arm.com
CC: linux@arm.linux.org.uk
CC: nico@linaro.org
CC: rob.herring@calxeda.com
(cherry picked from commit 05774088391c7430f6a4c1d5d18196ef17bb3ba9)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: mm: use inner-shareable barriers for inner-shareable maintenance

In order to ensure ordering and completion of inner-shareable maintenance
instructions (cache and TLB) on AArch64, we can use the -ish suffix to
the dmb and dsb instructions respectively.

This patch updates our low-level cache and tlb maintenance routines to
use the inner-shareable barrier variants where appropriate.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit dc60b777fcdddbadab111028e266fd69d4702b34)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: head: fix cache flushing and barriers in set_cpu_boot_mode_flag

set_cpu_boot_mode_flag is used to identify which exception levels are
encountered across the system by CPUs trying to enter the kernel. The
basic algorithm is: if a CPU is booting at EL2, it will set a flag at
an offset of #4 from __boot_cpu_mode, a cacheline-aligned variable.
Otherwise, a flag is set at an offset of zero into the same cacheline.
This enables us to check that all CPUs booted at the same exception
level.

This cacheline is written with the stage-1 MMU off (that is, via a
strongly-ordered mapping) and will bypass any clean lines in the cache,
leading to potential coherence problems when the variable is later
checked via the normal, cacheable mapping of the kernel image.

This patch reworks the broken flushing code so that we:

  (1) Use a DMB to order the strongly-ordered write of the cacheline
      against the subsequent cache-maintenance operation (by-VA
      operations only hazard against normal, cacheable accesses).

  (2) Use a single dc ivac instruction to invalidate any clean lines
      containing a stale copy of the line after it has been updated.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit d0488597a1b7105957b6d7d1bb0b6ee88aa51b37)
Signed-off-by: Mark Brown <broonie@kernel.org>

arm64: barriers: use barrier() instead of smp_mb() when !SMP

The recently introduced acquire/release accessors refer to smp_mb()
in the !CONFIG_SMP case. This is confusing when reading the code, so use
barrier() directly when we know we're UP.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit be6209a6107e0f63544e3e7d00fd5c95434ec80a)
Signed-off-by: Mark Brown <broonie@kernel.org>
Conflicts:
arch/arm64/include/asm/barrier.h

arm64: barriers: wire up new barrier options

Now that all callers of the barrier macros are updated to pass the
mandatory options, update the macros so the option is actually used.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 493e68747e07b69da3d746352525a1ebd6b61d82)
Signed-off-by: Mark Brown <broonie@kernel.org>
Conflicts:
arch/arm64/include/asm/barrier.h

Merge tag 'kvm-for-lsk-v3.10-v1' of git://git.linaro.org/people/christoffer.dall/linux-kvm-arm into lsk-v3.10-kvm

KVM/ARM/arm64 Support for LSK v3.10

KVM: correct null pid check in kvm_vcpu_yield_to()

Correct a simple mistake of checking the wrong variable
before a dereference, resulting in the dereference not being
properly protected by rcu_dereference().

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 27fbe64bfa63cfb9da025975b59d96568caa2d53)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()

Read-only memory ranges may be backed by the zero page, so avoid
misidentifying it a a MMIO pfn.

This fixes another issue I identified when testing QEMU+KVM_UEFI, where
a read to an uninitialized emulated NOR flash brought in the zero page,
but mapped as a read-write device region, because kvm_is_mmio_pfn()
misidentifies it as a MMIO pfn due to its PG_reserved bit being set.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: b88657674d39 ("ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 85c8555ff07ef09261bd50d603cd4290cff5a8cc)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

mm: export symbol dependencies of is_zero_pfn()

In order to make the static inline function is_zero_pfn() callable by
modules, export its symbol dependencies 'zero_pfn' and (for s390 and
mips) 'zero_page_mask'.

We need this for KVM, as CONFIG_KVM is a tristate for all supported
architectures except ARM and arm64, and testing a pfn whether it refers
to the zero page is required to correctly distinguish the zero page
from other special RAM ranges that may also have the PG_reserved bit
set, but need to be treated as MMIO memory.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0b70068e47e8f0c813a902dc3d6def601fd15acb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: mm: Introduce virt_to_idmap() with an arch hook

On some PAE systems (e.g. TI Keystone), memory is above the
32-bit addressable limit, and the interconnect provides an
aliased view of parts of physical memory in the 32-bit addressable
space.  This alias is strictly for boot time usage, and is not
otherwise usable because of coherency limitations. On such systems,
the idmap mechanism needs to take this aliased mapping into account.

This patch introduces virt_to_idmap() and a arch function pointer which
can be populated by platform which needs it. Also populate necessary
idmap spots with now available virt_to_idmap(). Avoided #ifdef approach
to be compatible with multi-platform builds.

Most architecture won't touch it and in that case virt_to_idmap()
fall-back to existing virt_to_phys() macro.

Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
(cherry picked from commit 4dc9a81715973cb137a14399420bb35b0ed7d6ef)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: barrier: allow options to be passed to memory barrier instructions

On ARMv7, the memory barrier instructions take an optional `option'
field which can be used to constrain the effects of a memory barrier
based on shareability and access type.

This patch allows the caller to pass these options if required, and
updates the smp_*() barriers to request inner-shareable barriers,
affecting only stores for the _wmb variant. wmb() is also changed to
use the -st version of dsb.

Reported-by: Albin Tonnerre <albin.tonnerre@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 3ea128065ed20d33bd02ff6dab689f88e38000be)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: 7990/1: asm: rename logical shift macros push pull into lspush lspull

Renames logical shift macros, 'push' and 'pull', defined in
arch/arm/include/asm/assembler.h, into 'lspush' and 'lspull'.
That eliminates name conflict between 'push' logical shift macro
and 'push' instruction mnemonic. That allows assembler.h to be
included in .S files that use 'push' instruction.

Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit d98b90ea22b0a28d9d787769704a9cf1ea5a513a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

include/linux/mm.h: add PAGE_ALIGNED() helper

To test whether an address is aligned to PAGE_SIZE.

Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 0fa73b86ef0797ca4fde5334117ca0b330f08030)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Revert "arm, kvm: fix double lock on cpu_add_remove_lock"

This reverts commit d77503eadd2f16f2900b9be79a1dc6f37e8cd579.  The whole
register cpu hotplug fix series has not been applied, so LSK is released
without this fix.  If we ever include that series in LSK later, then
this can be fixed later too.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 553f809e23f00976caea7a1ebdabaa58a6383e7d)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm: kvm: fix CPU hotplug

On some platforms with no power management capabilities, the hotplug
implementation is allowed to return from a smp_ops.cpu_die() call as a
function return. Upon a CPU onlining event, the KVM CPU notifier tries
to reinstall the hyp stub, which fails on platform where no reset took
place following a hotplug event, with the message:

CPU1: smp_ops.cpu_die() returned, trying to resuscitate
CPU1: Booted secondary processor
Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x80409540
unexpected data abort in Hyp mode at: 0x80401fe8
unexpected HVC/SVC trap in Hyp mode at: 0x805c6170

since KVM code is trying to reinstall the stub on a system where it is
already configured.

To prevent this issue, this patch adds a check in the KVM hotplug
notifier that detects if the HYP stub really needs re-installing when a
CPU is onlined and skips the installation call if the stub is already in
place, which means that the CPU has not been reset.

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 37a34ac1d4775aafbc73b9db53c7daebbbc67e6a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Report correct FSC for unsupported fault types

When we catch something that's not a permission fault or a translation
fault, we log the unsupported FSC in the kernel log, but we were masking
off the bottom bits of the FSC which was not very helpful.

Also correctly report the FSC for data and instruction faults rather
than telling people it was a DFCS, which doesn't exist in the ARM ARM.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 0496daa5cf99741ce8db82686b4c7446a37feabb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc

The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits
and not all the bits in the PA range. This is clearly a bug that
manifests itself on systems that allocate memory in the higher address
space range.

 [ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT
   instead of a hard-coded value and to move the alignment check of the
   allocation to mmu.c.  Also added a comment explaining why we hardcode
   the IPA range and changed the stage-2 pgd allocation to be based on
   the 40 bit IPA range instead of the maximum possible 48 bit PA range.
   - Christoffer ]

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit dbff124e29fa24aff9705b354b5f4648cd96e0bb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset

The sgi values calculated in read_set_clear_sgi_pend_reg() and
write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4
with catastrophic results in that subfunctions ended up overwriting
memory not allocated for the expected purpose.

This showed up as bugs in kfree() and the kernel complaining a lot of
you turn on memory debugging.

This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2

Reported-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 0fea6d7628ed6e25a9ee1b67edf7c859718d39e8)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: make number of irqs a configurable attribute

In order to make the number of interrupts configurable, use the new
fancy device management API to add KVM_DEV_ARM_VGIC_GRP_NR_IRQS as
a VGIC configurable attribute.

Userspace can now specify the exact size of the GIC (by increments
of 32 interrupts).

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit a98f26f183801685ef57333de4bafd4bbc692c7c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: delay vgic allocation until init time

It is now quite easy to delay the allocation of the vgic tables
until we actually require it to be up and running (when the first
vcpu is kicking around, or someones tries to access the GIC registers).

This allow us to allocate memory for the exact number of CPUs we
have. As nobody configures the number of interrupts just yet,
use a fallback to VGIC_NR_IRQS_LEGACY.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 4956f2bc1fdee4bc336532f3f34635a8534cedfd)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: kill VGIC_NR_IRQS

Nuke VGIC_NR_IRQS entierly, now that the distributor instance
contains the number of IRQ allocated to this GIC.

Also add VGIC_NR_IRQS_LEGACY to preserve the current API.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 5fb66da64064d0cb8dcce4cc8bf4cb1b921b13a0)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: handle out-of-range MMIO accesses

Now that we can (almost) dynamically size the number of interrupts,
we're facing an interesting issue:

We have to evaluate at runtime whether or not an access hits a valid
register, based on the sizing of this particular instance of the
distributor. Furthermore, the GIC spec says that accessing a reserved
register is RAZ/WI.

For this, add a new field to our range structure, indicating the number
of bits a single interrupts uses. That allows us to find out whether or
not the access is in range.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit c3c918361adcceb816c92b21dd95d2b46fb96a8f)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: kill VGIC_MAX_CPUS

We now have the information about the number of CPU interfaces in
the distributor itself. Let's get rid of VGIC_MAX_CPUS, and just
rely on KVM_MAX_VCPUS where we don't have the choice. Yet.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit fc675e355e705a046df7b635d3f3330c0ad94569)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: Parametrize VGIC_NR_SHARED_IRQS

Having a dynamic number of supported interrupts means that we
cannot relly on VGIC_NR_SHARED_IRQS being fixed anymore.

Instead, make it take the distributor structure as a parameter,
so it can return the right value.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit fb65ab63b8cae510ea1e43e68b5da2f9980aa6d5)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: switch to dynamic allocation

So far, all the VGIC data structures are statically defined by the
*maximum* number of vcpus and interrupts it supports. It means that
we always have to oversize it to cater for the worse case.

Start by changing the data structures to be dynamically sizeable,
and allocate them at runtime.

The sizes are still very static though.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit c1bfb577addd4867a82c4f235824a315d5afb94a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: plug irq injection race

As it stands, nothing prevents userspace from injecting an interrupt
before the guest's GIC is actually initialized.

This goes unnoticed so far (as everything is pretty much statically
allocated), but ends up exploding in a spectacular way once we switch
to a more dynamic allocation (the GIC data structure isn't there yet).

The fix is to test for the "ready" flag in the VGIC distributor before
trying to inject the interrupt. Note that in order to avoid breaking
userspace, we have to ignore what is essentially an error.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 71afaba4a2e98bb7bdeba5078370ab43d46e67a1)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: Clarify and correct vgic documentation

The VGIC virtual distributor implementation documentation was written a
very long time ago, before the true nature of the beast had been
partially absorbed into my bloodstream.  Clarify the docs.

Plus, it fixes an actual bug.  ICFRn, pfff.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 7e362919a59e6fc60e08ad1cf0b047291d1ca2e9)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: Fix SGI writes to GICD_I{CS}PENDR0

Writes to GICD_ISPENDR0 and GICD_ICPENDR0 ignore all settings of the
pending state for SGIs.  Make sure the implementation handles this
correctly.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 9da48b5502622f9f0e49df957521ec43a0c9f4c1)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: Improve handling of GICD_I{CS}PENDRn

Writes to GICD_ISPENDRn and GICD_ICPENDRn are currently not handled
correctly for level-triggered interrupts.  The spec states that for
level-triggered interrupts, writes to the GICD_ISPENDRn activate the
output of a flip-flop which is in turn or'ed with the actual input
interrupt signal.  Correspondingly, writes to GICD_ICPENDRn simply
deactivates the output of that flip-flop, but does not (of course) affect
the external input signal.  Reads from GICC_IAR will also deactivate the
flip-flop output.

This requires us to track the state of the level-input separately from
the state in the flip-flop.  We therefore introduce two new variables on
the distributor struct to track these two states.  Astute readers may
notice that this is introducing more state than required (because an OR
of the two states gives you the pending state), but the remaining vgic
code uses the pending bitmap for optimized operations to figure out, at
the end of the day, if an interrupt is pending or not on the distributor
side.  Refactoring the code to consider the two state variables all the
places where we currently access the precomputed pending value, did not
look pretty.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit faa1b46c3e9f4d40359aee04ff275eea5f4cae3a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: vgic: Clear queued flags on unqueue

If we unqueue a level-triggered interrupt completely, and the LR does
not stick around in the active state (and will therefore no longer
generate a maintenance interrupt), then we should clear the queued flag
so that the vgic can actually queue this level-triggered interrupt at a
later time and deal with its pending state then.

Note: This should actually be properly fixed to handle the active state
on the distributor.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit cced50c9280ef7ca1af48080707a170efa1adfa0)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Rename irq_active to irq_queued

We have a special bitmap on the distributor struct to keep track of when
level-triggered interrupts are queued on the list registers.  This was
named irq_active, which is confusing, because the active state of an
interrupt as per the GIC spec is a different thing, not specifically
related to edge-triggered/level-triggered configurations but rather
indicates an interrupt which has been ack'ed but not yet eoi'ed.

Rename the bitmap and the corresponding accessor functions to irq_queued
to clarify what this is actually used for.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit dbf20f9d8105cca531614c8bff9a74351e8e67e7)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Rename irq_state to irq_pending

The irq_state field on the distributor struct is ambiguous in its
meaning; the comment says it's the level of the input put, but that
doesn't make much sense for edge-triggered interrupts.  The code
actually uses this state variable to check if the interrupt is in the
pending state on the distributor so clarify the comment and rename the
actual variable and accessor methods.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 227844f53864077ccaefe01d0960fcccc03445ce)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: VFIO: register kvm_device_ops dynamically

Now that we have a dynamic means to register kvm_device_ops, use that
for the VFIO kvm device, instead of relying on the static table.

This is achieved by a module_init call to register the ops with KVM.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Williamson <Alex.Williamson@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 80ce1639727e9d38729c34f162378508c307ca25)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM: vgic: register kvm_device_ops dynamically

Now that we have a dynamic means to register kvm_device_ops, use that
for the ARM VGIC, instead of relying on the static table.

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c06a841bf36340e9e917ce60d11a6425ac85d0bd)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: device: add simple registration mechanism for kvm_device_ops

kvm_ioctl_create_device currently has knowledge of all the device types
and their associated ops. This is fairly inflexible when adding support
for new in-kernel device emulations, so move what we currently have out
into a table, which can support dynamic registration of ops by new
drivers for virtual hardware.

Cc: Alex Williamson <Alex.Williamson@redhat.com>
Cc: Alex Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d60eacb07053142bfb9b41582074a89a790a9d46)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: EVENTFD: remove inclusion of irq.h

No more needed. irq.h would be void on ARM.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 0ba09511ddc3ff0b462f37b4fe4b9c4dccc054ec)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM/arm64: KVM: fix use of WnR bit in kvm_is_write_fault()

The ISS encoding for an exception from a Data Abort has a WnR
bit[6] that indicates whether the Data Abort was caused by a
read or a write instruction. While there are several fields
in the encoding that are only valid if the ISV bit[24] is set,
WnR is not one of them, so we can read it unconditionally.

Instead of fixing both implementations of kvm_is_write_fault()
in place, reimplement it just once using kvm_vcpu_dabt_iswrite(),
which already does the right thing with respect to the WnR bit.
Also fix up the callers to pass 'vcpu'

Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit a7d079cea2dffb112e26da2566dd84c0ef1fce97)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: remove redundant assignments in __kvm_set_memory_region

__kvm_set_memory_region sets r to EINVAL very early.
Doing it again is not necessary. The same is true later on, where
r is assigned -ENOMEM twice.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit f2a25160887e00434ce1361007009120e1fecbda)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: remove redundant assigment of return value in kvm_dev_ioctl

The first statement of kvm_dev_ioctl is
        long r = -EINVAL;

No need to reassign the same value.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a13f533b2f1d53a7c0baa7490498caeab7bc8ba5)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: remove redundant check of in_spin_loop

The expression `vcpu->spin_loop.in_spin_loop' is always true,
because it is evaluated only when the condition
`!vcpu->spin_loop.in_spin_loop' is false.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 34656113182b704682e23d1363417536addfec97)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: remove garbage arg to *hardware_{en,dis}able

In the beggining was on_each_cpu(), which required an unused argument to
kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten.

Remove unnecessary arguments that stem from this.

Signed-off-by: Radim KrÄ\8dmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 13a34e067eab24fec882e1834fbf2cc31911d474)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: static inline empty kvm_arch functions

Using static inline is going to save few bytes and cycles.
For example on powerpc, the difference is 700 B after stripping.
(5 kB before)

This patch also deals with two overlooked empty functions:
kvm_arch_flush_shadow was not removed from arch/mips/kvm/mips.c
  2df72e9bc KVM: split kvm_arch_flush_shadow
and kvm_arch_sched_in never made it into arch/ia64/kvm/kvm-ia64.c.
  e790d9ef6 KVM: add kvm_arch_sched_in

Signed-off-by: Radim KrÄ\8dmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0865e636aef751966e6e0f8950a26bc7391e923c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: forward declare structs in kvm_types.h

Opaque KVM structs are useful for prototypes in asm/kvm_host.h, to avoid
"'struct foo' declared inside parameter list" warnings (and consequent
breakage due to conflicting types).

Move them from individual files to a generic place in linux/kvm_types.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 656473003bc7e056c3bbd4a4d9832dad01e86f76)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Unconditionally export KVM_CAP_USER_NMI

The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space.  Unfortunately, since the
definition of KVM_CAP_USER_NMI was guarded by #ifdef
__KVM_HAVE_USER_NMI, such discovery still required a user space update.

Therefore, unconditionally export KVM_CAP_USER_NMI and change the
the typo in the comment for the IOCTL number definition as well.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 44b5ce73c99c389817be71b9161bceb197d40ecb)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Unconditionally export KVM_CAP_READONLY_MEM

The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space.  Unfortunately, since the
definition of KVM_CAP_READONLY_MEM was guarded by #ifdef
__KVM_HAVE_READONLY_MEM, such discovery still required a user space
update.

Therefore, unconditionally export KVM_CAP_READONLY_MEM and change the
in-kernel conditional to rely on __KVM_HAVE_READONLY_MEM.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0f8a4de3e088797576ac76200b634b802e5c7781)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: vgic: declare probe function pointer as const

We extract the vgic probe function from the of_device_id data pointer,
which is const. Kill the sparse warning by ensuring that the local
function pointer is also marked as const.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit de56fb1923ca11f428bf557870e0faa99f38762e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: vgic: return int instead of bool when checking I/O ranges

vgic_ioaddr_overlap claims to return a bool, but in reality it returns
an int. Shut sparse up by fixing the type signature.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 1fa451bcc67fa921a04c5fac8dbcde7844d54512)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM/arm64: return -EFAULT if copy_from_user fails in set_timer_reg

We currently return the number of bytes not copied if set_timer_reg
fails, which is almost certainly not what userspace would like.

This patch returns -EFAULT instead.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit bd218bce92d3868ba4fe5e9e3eb8199d2aa614af)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM/arm64: avoid returning negative error code as bool

is_valid_cache returns true if the specified cache is valid.
Unfortunately, if the parameter passed it out of range, we return
-ENOENT, which ends up as true leading to potential hilarity.

This patch returns false on the failure path instead.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 18d457661fb9fa69352822ab98d39331c3d0e571)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM/arm64: fix broken __percpu annotation

Running sparse results in a bunch of noisy address space mismatches
thanks to the broken __percpu annotation on kvm_get_running_vcpus.

This function returns a pcpu pointer to a pointer, not a pointer to a
pcpu pointer. This patch fixes the annotation, which kills the warnings
from sparse.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 4000be423cb01a8d09de878bb8184511c49d4238)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: ARM/arm64: fix non-const declaration of function returning const

Sparse kicks up about a type mismatch for kvm_target_cpu:

arch/arm64/kvm/guest.c:271:25: error: symbol 'kvm_target_cpu' redeclared with different type (originally declared at ./arch/arm64/include/asm/kvm_host.h:45) - different modifiers

so fix this by adding the missing const attribute to the function
declaration.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 6951e48bff0b55d2a8e825a953fc1f8e3a34bf1c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm/arm64: KVM: Support KVM_CAP_READONLY_MEM

When userspace loads code and data in a read-only memory regions, KVM
needs to be able to handle this on arm and arm64.  Specifically this is
used when running code directly from a read-only flash device; the
common scenario is a UEFI blob loaded with the -bios option in QEMU.

Note that the MMIO exit on writes to a read-only memory is ABI and can
be used to emulate block-erase style flash devices.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 98047888bb9fd57734028c44ec17413ddd623958)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Introduce gfn_to_hva_memslot_prot

To support read-only memory regions on arm and arm64, we have a need to
resolve a gfn to an hva given a pointer to a memslot to avoid looping
through the memslots twice and to reuse the hva error checking of
gfn_to_hva_prot(), add a new gfn_to_hva_memslot_prot() function and
refactor gfn_to_hva_prot() to use this function.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 64d831269ccbca1fc6d739a0f3c8aa24afb43a5e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: add kvm_arch_sched_in

Introduce preempt notifiers for architecture specific code.
Advantage over creating a new notifier in every arch is slightly simpler
code and guaranteed call order with respect to kvm_sched_in.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e790d9ef6405633b007339d746b709aed43a928d)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: avoid unnecessary synchronize_rcu

We dont have to wait for a grace period if there is no oldpid that
we are going to free. putpid also checks for NULL, so this patch
only fences synchronize_rcu.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7103f60de8bed21a0ad5d15d2ad5b7a333dda201)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Move more code under CONFIG_HAVE_KVM_IRQFD

Commits e4d57e1ee1ab (KVM: Move irq notifier implementation into
eventfd.c, 2014-06-30) included the irq notifier code unconditionally
in eventfd.c, while it was under CONFIG_HAVE_KVM_IRQCHIP before.

Similarly, commit 297e21053a52 (KVM: Give IRQFD its own separate enabling
Kconfig option, 2014-06-30) moved code from CONFIG_HAVE_IRQ_ROUTING
to CONFIG_HAVE_KVM_IRQFD but forgot to move the pieces that used to be
under CONFIG_HAVE_KVM_IRQCHIP.

Together, this broke compilation without CONFIG_KVM_XICS.  Fix by adding
or changing the #ifdefs so that they point at CONFIG_HAVE_KVM_IRQFD.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c77dcacb397519b6ade8f08201a4a90a7f4f751e)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Give IRQFD its own separate enabling Kconfig option

Currently, the IRQFD code is conditional on CONFIG_HAVE_KVM_IRQ_ROUTING.
So that we can have the IRQFD code compiled in without having the
IRQ routing code, this creates a new CONFIG_HAVE_KVM_IRQFD, makes
the IRQFD code conditional on it instead of CONFIG_HAVE_KVM_IRQ_ROUTING,
and makes all the platforms that currently select HAVE_KVM_IRQ_ROUTING
also select HAVE_KVM_IRQFD.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 297e21053a52f060944e9f0de4c64fad9bcd72fc)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Move irq notifier implementation into eventfd.c

This moves the functions kvm_irq_has_notifier(), kvm_notify_acked_irq(),
kvm_register_irq_ack_notifier() and kvm_unregister_irq_ack_notifier()
from irqchip.c to eventfd.c.  The reason for doing this is that those
functions are used in connection with IRQFDs, which are implemented in
eventfd.c.  In future we will want to use IRQFDs on platforms that
don't implement the GSI routing implemented in irqchip.c, so we won't
be compiling in irqchip.c, but we still need the irq notifiers.  The
implementation is unchanged.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e4d57e1ee1ab59f0cef0272800ac6c52e0ec814a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Move all accesses to kvm::irq_routing into irqchip.c

Now that struct _irqfd does not keep a reference to storage pointed
to by the irq_routing field of struct kvm, we can move the statement
that updates it out from under the irqfds.lock and put it in
kvm_set_irq_routing() instead.  That means we then have to take a
srcu_read_lock on kvm->irq_srcu around the irqfd_update call in
kvm_irqfd_assign(), since holding the kvm->irqfds.lock no longer
ensures that that the routing can't change.

Combined with changing kvm_irq_map_gsi() and kvm_irq_map_chip_pin()
to take a struct kvm * argument instead of the pointer to the routing
table, this allows us to to move all references to kvm->irq_routing
into irqchip.c.  That in turn allows us to move the definition of the
kvm_irq_routing_table struct into irqchip.c as well.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9957c86d659a4d5a2bed25ccbd3bfc9c3f25e658)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: irqchip: Provide and use accessors for irq routing table

This provides accessor functions for the KVM interrupt mappings, in
order to reduce the amount of code that accesses the fields of the
kvm_irq_routing_table struct, and restrict that code to one file,
virt/kvm/irqchip.c.  The new functions are kvm_irq_map_gsi(), which
maps from a global interrupt number to a set of IRQ routing entries,
and kvm_irq_map_chip_pin, which maps from IRQ chip and pin numbers to
a global interrupt number.

This also moves the update of kvm_irq_routing_table::chip[][]
into irqchip.c, out of the various kvm_set_routing_entry
implementations.  That means that none of the kvm_set_routing_entry
implementations need the kvm_irq_routing_table argument anymore,
so this removes it.

This does not change any locking or data lifetime rules.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8ba918d488caded2c4368b0b922eb905fe3bb101)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Don't keep reference to irq routing table in irqfd struct

This makes the irqfd code keep a copy of the irq routing table entry
for each irqfd, rather than a reference to the copy in the actual
irq routing table maintained in kvm/virt/irqchip.c.  This will enable
us to change the routing table structure in future, or even not have a
routing table at all on some platforms.

The synchronization that was previously achieved using srcu_dereference
on the read side is now achieved using a seqcount_t structure.  That
ensures that we don't get a halfway-updated copy of the structure if
we read it while another thread is updating it.

We still use srcu_read_lock/unlock around the read side so that when
changing the routing table we can be sure that after calling
synchronize_srcu, nothing will be using the old routing.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 56f89f3629ffd1a21d38c3d0bea23deac0e284ce)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: fix 64bit CP15 VM access for 32bit guests

Commit f0a3eaff71b8 (ARM64: KVM: fix big endian issue in
access_vm_reg for 32bit guest) changed the way we handle CP15
VM accesses, so that all 64bit accesses are done via vcpu_sys_reg.

This looks like a good idea as it solves indianness issues in an
elegant way, except for one small detail: the register index is
doesn't refer to the same array! We end up corrupting some random
data structure instead.

Fix this by reverting to the original code, except for the introduction
of a vcpu_cp15_64_high macro that deals with the endianness thing.

Tested on Juno with 32bit SMP guests.

Cc: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit dedf97e8ff2c7513b1370e36b56e08b6bd0f0290)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: arm64: GICv3: mandate page-aligned GICV region

Just like GICv2 was fixed in 63afbe7a0ac1
(kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform),
mandate the GICV region to be both aligned on a page boundary and
its size to be a multiple of page size.

This prevents a guest from being able to poke at regions where we
have no idea what is sitting there.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit fb3ec67942e92e5713e05b7691b277d0a0c0575d)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: GICv3: move system register access to msr_s/mrs_s

Commit 72c583951526 (arm64: gicv3: Allow GICv3 compilation with
older binutils) changed the way we express the GICv3 system registers,
but couldn't change the occurences used by KVM as the code wasn't
merged yet.

Just fix the accessors.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit f4c321eb268e932786c112e0b902ee942d91a336)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform

If the physical address of GICV isn't page-aligned, then we end up
creating a stage-2 mapping of the page containing it, which causes us to
map neighbouring memory locations directly into the guest.

As an example, consider a platform with GICV at physical 0x2c02f000
running a 64k-page host kernel. If qemu maps this into the guest at
0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will
map host physical region 0x2c020000 - 0x2c02efff. Accesses to these
physical regions may cause UNPREDICTABLE behaviour, for example, on the
Juno platform this will cause an SError exception to EL3, which brings
down the entire physical CPU resulting in RCU stalls / HYP panics / host
crashing / wasted weeks of debugging.

SBSA recommends that systems alias the 4k GICV across the bounding 64k
region, in which case GICV physical could be described as 0x2c020000 in
the above scenario.

This patch fixes the problem by failing the vgic probe if the physical
base address or the size of GICV aren't page-aligned. Note that this
generated a warning in dmesg about freeing enabled IRQs, so I had to
move the IRQ enabling later in the probe.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joel Schopp <joel.schopp@amd.com>
Cc: Don Dutile <ddutile@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Joel Schopp <joel.schopp@amd.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 63afbe7a0ac184ef8485dac4914e87b211b5bfaa)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Allow KVM_CHECK_EXTENSION on the vm fd

The KVM_CHECK_EXTENSION is only available on the kvm fd today. Unfortunately
on PPC some of the capabilities change depending on the way a VM was created.

So instead we need a way to expose capabilities as VM ioctl, so that we can
see which VM type we're using (HV or PR). To enable this, add the
KVM_CHECK_EXTENSION ioctl to our vm ioctl portfolio.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 92b591a4c46b103ebd3fc0d03a084e1efd331253)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

KVM: Rename and add argument to check_extension

In preparation to make the check_extension function available to VM scope
we add a struct kvm * argument to the function header and rename the function
accordingly. It will still be called from the /dev/kvm fd, but with a NULL
argument for struct kvm *.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 784aa3d7fb6f729c06d5836c9d9569f58e4d05ae)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

kvm: Resolve missing-field-initializers warnings

Resolve missing-field-initializers warnings seen in W=2 kernel
builds by having macros generate more elaborated initializers.
That is enough to silence the warnings.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 25f97ff451a4aab534afc1290af97d23ea0b4fb3)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: make it easier to check the CPU part number correctly

Ensure that platform maintainers check the CPU part number in the right
manner: the CPU part number is meaningless without also checking the
CPU implement(e|o)r (choose your preferred spelling!)  Provide an
interface which returns both the implementer and part number together,
and update the definitions to include the implementer.

Mark the old function as being deprecated... indeed, using the old
function with the definitions will now always evaluate as false, so
people must update their un-merged code to the new function.  While
this could be avoided by adding new definitions, we'd also have to
create new names for them which would be awkward.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit af040ffc9ba1e079ee4c0748aff64fa3d4716fa5)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: enable trapping of all debug registers

Enable trapping of the debug registers, preventing the guests to
mess with the host state (and allowing guests to use the debug
infrastructure as well).

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit d329de09333aeee127aaf22eb7cee9c2dc4cf475)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: implement lazy world switch for debug registers

Implement switching of the debug registers. While the number
of registers is massive, CPUs usually don't implement them all
(A57 has 6 breakpoints and 4 watchpoints, which gives us a total
of 22 registers "only").

Also, we only save/restore them when MDSCR_EL1 has debug enabled,
or when we've flagged the debug registers as dirty. It means that
most of the time, we only save/restore MDSCR_EL1.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit b0e626b380872b663918230fafdac128c34fea56)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: add trap handlers for AArch32 debug registers

Add handlers for all the AArch32 debug registers that are accessible
from EL0 or EL1. The code follow the same strategy as the AArch64
counterpart with regards to tracking the dirty state of the debug
registers.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit bdfb4b389c8d8f07e2d5b8e1291e01c789ba4aad)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: check ordering of all system register tables

We now have multiple tables for the various system registers
we trap. Make sure we check the order of all of them, as it is
critical that we get the order right (been there, done that...).

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit e6a9551760623d1703487e8a16bb9c3ea8a7e7a8)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: use separate tables for AArch32 32 and 64bit traps

An interesting "feature" of the CP14 encoding is that there is
an overlap between 32 and 64bit registers, meaning they cannot
live in the same table as we did for CP15.

Create separate tables for 64bit CP14 and CP15 registers, and
let the top level handler use the right one.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit a9866ba0cddfc497335fa02a175c4578b96722ff)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: common infrastructure for handling AArch32 CP14/CP15

As we're about to trap a bunch of CP14 registers, let's rework
the CP15 handling so it can be generalized and work with multiple
tables.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 72564016aae45f42e488f926bc803f9a2e1c771c)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: add trap handlers for AArch64 debug registers

Add handlers for all the AArch64 debug registers that are accessible
from EL0 or EL1. The trapping code keeps track of the state of the
debug registers, allowing for the switch code to implement a lazy
switching strategy.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 0c557ed4983b7abe152212b5b1726c2a789b2c61)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: move DBG_MDSCR_* to asm/debug-monitors.h

In order to be able to use the DBG_MDSCR_* macros from the KVM code,
move the relevant definitions to the obvious include file.

Also move the debug_el enum to a portion of the file that is guarded
by #ifndef __ASSEMBLY__ in order to use that file from assembly code.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 51ba248164d0eeb8b4f94d405430c18a56c6ac9a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

arm64: KVM: rename pm_fake handler to trap_raz_wi

pm_fake doesn't quite describe what the handler does (ignoring writes
and returning 0 for reads).

As we're about to use it (a lot) in a different context, rename it
with a (admitedly cryptic) name that make sense for all users.

Reviewed-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 7609c1251f9d8bbcd6a05ba22153e50cf4f88cff)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guest

Fix issue with 32bit guests running on top of BE KVM host.
Indexes of high and low words of 64bit cp15 register are
swapped in case of big endian code, since 64bit cp15 state is
restored or saved with double word write or read instruction.

Define helper macro to access low words of 64bit cp15 register.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit f0a3eaff71b8bd5d5acfda1f0cf3eedf49755622)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: set and get of sys registers in BE case

Since size of all sys registers is always 8 bytes. Current
code is actually endian agnostic. Just clean it up a bit.
Removed comment about little endian. Change type of pointer
from 'void *' to 'u64 *' to enforce stronger type checking.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 26c99af1018c35020cfad1d20f02acb224807655)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: fix vgic_bitmap_get_reg function for BE 64bit case

Fix vgic_bitmap_get_reg function to return 'right' word address of
'unsigned long' bitmap value in case of BE 64bit image.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 9662fb4854e1319b4affda47f279c3f210316def)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: store kvm_vcpu_fault_info est_el2 as word

esr_el2 field of struct kvm_vcpu_fault_info has u32 type.
It should be stored as word. Current code works in LE case
because existing puts least significant word of x1 into
esr_el2, and it puts most significant work of x1 into next
field, which accidentally is OK because it is updated again
by next instruction. But existing code breaks in BE case.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit ba083d20d8cfa9e999043cd89c4ebc964ccf8927)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM64: KVM: MMIO support BE host running LE code

In case of guest CPU running in LE mode and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit b30070862edbdb252f9d0d3a1e61b8dc4c68e3d2)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: enable KVM in Kconfig on big-endian systems

Previous patches addresses ARMV7 big-endian virtualiztion,
kvm related issues, so enable ARM_VIRT_EXT for big-endian
now.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit f5aa462147a209dab40b02f0f70234784b913bf9)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: one_reg coproc set and get BE fixes

Fix code that handles KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls to work in BE
image. Before this fix get/set_one_reg functions worked correctly only in
LE case - reg_from_user was taking 'void *' kernel address that actually could
be target/source memory of either 4 bytes size or 8 bytes size, and code copied
from/to user memory that could hold either 4 bytes register, 8 byte register
or pair of 4 bytes registers.

In order to work in endian agnostic way reg_from_user to reg_to_user functions
should copy register value only to kernel variable with size that matches
register size. In few place where size mismatch existed fix issue on macro
caller side.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 73891f72c414afff6da6f01e7af2ff5a44a8b823)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

ARM: KVM: MMIO support BE host running LE code

In case of status register E bit is not set (LE mode) and host runs in
BE mode we need byteswap data, so read/write is emulated correctly.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 27f194fd360a96cc64bebb2d69dd5abd67984b8a)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>