FROMLIST: usb: dwc3: Enable support for 64-bit system

Add 64-bit DMA operation support to the USB DWC3 driver.
First attempt to set the coherent DMA mask for 64-bit DMA.
If that failed, attempt again with 32-bit DMA.

Change-Id: I6d8e0e35ed606aa38d1dbadbb48f5629c1b39552
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
(am from https://patchwork.kernel.org/patch/8109031/)

FROMLIST: usb: dwc3: pass arch data to xhci-hcd child

The xhci-hcd child node needs to inherit archdata attribute to use
dma_ops functions and attributes. This patch enables the USB DWC3
driver to pass archdata attributes to its xhci-hcd child node.

Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Change-Id: I82abc58fd8d01d2233499958713dd69ed58dedb5
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
(am from https://patchwork.kernel.org/patch/8109041/)

FROMLIST: ARM64: dts: rockchip: add syscon-reboot-mode DT node

Add syscon-reboot-mode driver DT node for rk3368 platform

Change-Id: I050579c2392fad6c7756d0d8a5dfc1a8a36023e4
Tested-by: Caesar Wang <caesar.upstream@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

ARM64: dts: rockchip: add gt9xx touchscreen support

need to modify the i2c4 scl and sda connection in hardware.

Change-Id: I57981a3891047412b9ea61112fbf5ff4a23223b3
Signed-off-by: David Wu <david.wu@rock-chips.com>

video: rockchip: vop-lite: fix get clock source failed

Rename clock name and fix deadlock when VOP irqs are disabling.

Signed-off-by: Wenlong Zhuang <daisen.zhuang@rock-chips.com>
Signed-off-by: Xubilv <xbl@rock-chips.com>
Change-Id: Ib794128e9e0dda0fc7b4c48d52d196e8ba70c11d

UPSTREAM: usb: dwc3: Fix assignment of EP transfer resources

The assignement of EP transfer resources was not handled properly in the
dwc3 driver. Commit aebda6187181 ("usb: dwc3: Reset the transfer
resource index on SET_INTERFACE") previously fixed one aspect of this
where resources may be exhausted with multiple calls to SET_INTERFACE.
However, it introduced an issue where composite devices with multiple
interfaces can be assigned the same transfer resources for different
endpoints. This patch solves both issues.

The assignment of transfer resources cannot perfectly follow the data
book due to the fact that the controller driver does not have all
knowledge of the configuration in advance. It is given this information
piecemeal by the composite gadget framework after every
SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
programming model in this scenario can cause errors. For two reasons:

1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION and
SET_INTERFACE (8.1.5). This is incorrect in the scenario of multiple
interfaces.

2) The databook does not mention doing more DEPXFERCFG for new endpoint
on alt setting (8.1.6).

The following simplified method is used instead:

All hardware endpoints can be assigned a transfer resource and this
setting will stay persistent until either a core reset or hibernation.
So whenever we do a DEPSTARTCFG(0) we can go ahead and do DEPXFERCFG for
every hardware endpoint as well. We are guaranteed that there are as
many transfer resources as endpoints.

This patch triggers off of the calling dwc3_gadget_start_config() for
EP0-out, which always happens first, and which should only happen in one
of the above conditions.

Fixes: aebda6187181 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE")
Cc: <stable@vger.kernel.org> # v3.2+
Reported-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
(cherry picked from commit c450960187f45d4260db87c7dd4fc0bceb5565d8)

Change-Id: I804cb4d2f3b79b3cfd4be5b0942ed6f866c1e580
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.

This patch is needed in order to pass one test case
defined in the OTG Automated Compliance Test specification.

Specification location:
http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_2.pdf

This test case uses PET Tool, and PET Tool is one USB hardware
equipment provided by MQP Electronics.

Test case id is 6.8.3 B-UUT Bypass Capacitance.

We must set this otg flag in order to be able to return OTG
descriptor during enumeration, otherwise this test case with
failed with below error: "Get OTG descriptor request stalled".

Signed-off-by: Jianqiang Tang <jianqiang.tang@intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
(cherry picked from commit 6a4290cc28be12d72d50644bd4bda1aede37cd41)

Change-Id: If264c2a878ee8520edc57876ab2325dce4ca869e
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: of-simple: fix build warning on !PM

if we have a !PM kernel build, our runtime
suspend/resume callbacks will be left defined but
unused. Add a ifdef CONFIG_PM guard.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 5072cfc40a80cea3749fd3413b3896630d8c787e)

Change-Id: I6a7ceb1a90162b132afce17423888ab0cbdf897b
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: don't send extra ZLP

If the request->length is zero, a ZLP should already be sent due to that
and another ZLP is not needed to terminate the transfer.

Fixes: 04c03d10e507 ("usb: dwc3: gadget: handle request->zero")
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit d9261898a4b2c143c28568dc686a1becfc637a99)

Change-Id: Ib976552f93321f6ea52d3f0151c66fd6f2db8b17
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: pass a condition to dev_WARN_ONCE()

instead of using:

if (condition) {
dev_WARN_ONCE(dev, true, "foo");
return -EINVAL;
}

let's use:

if (dev_WARN_ONCE(dev, condition, "foo"))
return -EINVAL;

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 95ca961c758cd9ce789247098b09c39017637e58)

Change-Id: I8a7ee1e00ddf619d23ab974663c11fe795e9a478
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: trace: show request flags

struct usb_request have 3 flags which might be
important to know about during debug. This patch
shows each of the 3 flags as a single letter:

z -> for zero
s -> short not okay
i -> interrupt

A capital letter means the feature is enabled
while a lower case letter means it is disabled;

Thus 'zsI' indicates that a ZLP is not needed,
that we can accept a short packet and interrupt
for this request should be enabled.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 46a01427e969e53d993b988ebbdb8c7c3562b66f)

Change-Id: I5d60411c51eff9f5a5f1233680bca6369f6fc6b8
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: handle request->zero

So far, dwc3 has always missed request->zero
handling for every endpoint. Let's implement
that so we can handle cases where transfer must
be finished with a ZLP.

Note that dwc3 is a little special. Even though
we're dealing with a ZLP, we still need a buffer
of wMaxPacketSize bytes; to hide that detail from
every gadget driver, we have a preallocated buffer
of 1024 bytes (biggest bulk size) to use (and
share) among all endpoints.

Reported-by: Ravi B <ravibabu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 04c03d10e507052cfce6910ddf34091196e79e1c)

Change-Id: I4dce506b683a9381e73733d09dd03e12364bef1f
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: remove dwc3-qcom in favor of dwc3-of-simple

Now that we have a generic dwc3-of-simple.c, we can
use that instead of maintaining dwc3-qcom.c which is
extremely similar.

Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit b084662776be8b07ab9114ff1a16a4e9bf907d35)

Change-Id: I4ae3b2649b5b970ef2974d5fa41ac8ff2affb6e0
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: add generic OF glue layer

For simple platforms which merely enable some clocks
and populate its children, we can use this generic
glue layer to avoid boilerplate code duplication.

For now this supports Qcom and Xilinx, but if we
find a way to add generic handling of regulators and
optional PHYs, we can absorb exynos as well.

Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 16adc674d0d68a50dfc725574738d7ae11cf5d7e)

Change-Id: Ia397ebcc522d0cd33c8dd3ee286dc2e0a5383a58
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: ep0: fix setup_packet_pending initialization

It just ocurred to me that dwc3 already gives a
really hint of when a setup packet is pending and
that's the SETUP_PENDING TRB Status for EP0 IRQs.

Fix setup_packet_pending initialization based on
that. While at that, also make sure the comment in
gadget.c matches what code is doing.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit b5d335e5ea6a60f5254c1f3d5fddd47f4531bccf)

Change-Id: I9e197bee86b681e3d0da8692df8fac861eb00844
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: simplify next_request() return check

In dwc3_cleanup_done_reqs() we expect that all
iterations of our while (1) loop will find a valid
struct dwc3_request *. In case we don't, we're
dumping a WARN_ON_ONCE() splat so that people report
the failure.

This patch is a simple cleanup converting:

if (!req) {
WARN_ON_ONCE(1);
return 1;
}

to:

if (WARN_ON_ONCE(!req))
return 1;

which is a little easier to read.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit ac7bdcc1b3ad042d21bc65e57503d7b41fc69f05)

Change-Id: I1bfea94c01ee9df01930fd743301a7d04ce9b442
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: ep0: purge dev_dbg() calls

The last few dev_dbg() messages are converted to
tracepoints and we can finally ignore dev_dbg()
messages during debug sessions.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit acc38c4970caac17cd81dc941226ed17fe505d73)

Change-Id: I9046eeff627c97360cc9903e78fdd8715f95ce28
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: core: purge dev_dbg() calls

The last few dev_dbg() messages are converted to
tracepoints and we can finally ignore dev_dbg()
messages during debug sessions.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 1407bf13e3bf5f1168484c3e68b6ef9d8cf2bc72)

Change-Id: I7a39582e1b5bd29b5d377da4bfbf95f0598776d4
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: purge dev_dbg() calls

The last few dev_dbg() messages are converted to
tracepoints and we can finally ignore dev_dbg()
messages during debug sessions.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit ec5e795cdefb74b55c9fce918aa8a9226a8eec41)

Change-Id: Ia6d016de13b5944ff8add9f2bab3686a1651ed2f
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: usb: dwc3: gadget: simplify dwc3_gadget_ep_queue()

By moving our sanity checks our internal function
__dwc3_gadget_ep_queue() we can simplify the
externally visible API while also making sure that
callers of __dwc3_gadget_ep_queue() also make use of
the same checks.

Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit bb423984c28e9f94a8f466b791baa762cef0543d)

Change-Id: I6fc7b972e288b4d3ffcb629daed784c87d243e32
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

ARM64: dts: rk3366: add DT nodes for usb2.0 ehci and ohci

Change-Id: I4ade5961f0192d7ceff7c61557ddee6aba98224c
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

ARM64: dts: rk3366-tb: add spdif sound

Change-Id: I21e2879b94844b48282ff9aaa41c3f9d1ef89982
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

ARM64: dts: rk3366: add spdif

Change-Id: I3d0f86e54e537524b1542d2d94fd0a56fc9c7cf2
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

ARM64: configs: rockchip_defconfig: enable spdif

Change-Id: Ie021387c717eec5b0f583e9ff5e41f1818383b8f
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

ASoC: rockchip: add bindings for spdif controller

this patch add compatible for rk3366/rk3368/rk3399 spdif,
these three spdifs share the same type.

Change-Id: Iac533f3481962556e3ca2b0c4b685b64aec6786a
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

mmc: block: ioctl return EINVAL if cmd unknown

We should return -EINVAL if cmd is not MMC_IOC_CMD or MMC_IOC_MULTI_CMD,
otherwise blkdev_roset will return -EPERM.

Android adb, make_block_device_writable ioctl BLKROSET will return error,
make adb remount with error:
remount of /system failed;
couldn't make block device writable: Operation not permitted

Change-Id: I7d0a5727110c0fd9ad301a377e5002eae23f8aed
Fixes: a5f5774c55a2 ("mmc: block: Add new ioctl to send multi commands")
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

ARM64: dts: rk3366-tb: correct reset pin for Ethernet PHY

Change-Id: I94c1f22880965ab69865eeb81c0a33fa4f4201b4
Signed-off-by: Roger Chen <roger.chen@rock-chips.com>

ARM64: dts: rk3366: fix SCLK_MAC_TX && drive strength for RGMII TX pins

Change-Id: I0fe3d33c99d1fb0fb5451ee6123d44e3399b84da
Signed-off-by: Roger Chen <roger.chen@rock-chips.com>

ARM64: configs: enable CONFIG_STMMAC_ETH for Rockchip GMAC

Change-Id: I469a1b97980316bb08810515efab926e59d2432c
Signed-off-by: Roger Chen <roger.chen@rock-chips.com>

Revert "arm64: rockchip: rockchip_defconfig enable ARM_CPUIDLE and CPU_FREQ_DEFAULT_GOV_INTERACTIVE"

This reverts commit 754010a8f89cb3a5b04d3e749c2ef8396fac776b.

interactive driver will tirgger warning:
sysfs: cannot create duplicate filename '/devices/system/cpu/cpufreq'

Change-Id: I8074820953f2f76093df038f437890d65d054a28

ARM64: dts: rockchip: rk3366: add cpu dvfs support for tb

Change-Id: Ibcefd6e6c0b351310c3768b9b0c1494a2664ff90
Signed-off-by: Feng Xiao <xf@rock-chips.com>

clk: rockchip: rk3366: modify hdmi clk according to the latest cru document

Change-Id: I815406cd8dfd94e8526b96a827df487fe5381620
Signed-off-by: Feng Xiao <xf@rock-chips.com>

arm64: rockchip: rockchip_defconfig enable ARM_CPUIDLE and CPU_FREQ_DEFAULT_GOV_INTERACTIVE

Change-Id: I786be6ce3a5f647df65a4e7b51cbb28152f39a7d
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: rockchip: rockchip_defconfig enable SYSCON_REBOOT_MODE

Change-Id: I638e0a2a8acf0843dca07c2a3355a3d06a18daf7
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: dts: rockchip: rk3366: add syscon-reboot-mode node

use PMU_GRF_OS_REG0 to communicate with loader.

Change-Id: I8c007192d77c5634f9cf899899683c6c8f44f8b8
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: dts: rockchip: rk3366: remove clock-frequency from timer node

Change-Id: I3ab1697f591ebf53b0e0ca90203ccb883c78dacc
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan

This patch adds Generic PHY access for sdhci-of-arasan. Driver
can get PHY handler from dt-binding, and power-on/init the PHY.
Currently, it's just mandatory for arasan,sdhci-5.1.

Change-Id: If61621796380c4a12e50fd3140e58342fd5e68b0
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

FROMLIST: dt-bindings: soc: add rockchip reboot mode head file

add macro #define for rockchip reboot mode

Change-Id: I84036d43864f80623519d0df959e1de7e1a540db
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

FROMLIST: power: reset: add reboot mode driver

This driver parse the reboot commands like "reboot loader"
and "reboot recovery" to get a boot mode described in the
device tree , then call the write interfae to store the boot
mode in some place like special register or sram , which can
be read by the bootloader after system reboot, then the bootloader
can take different action according to the mode stored.

This is commonly used on Android based devices, in order to
reboot the device into fastboot or recovery mode.

Change-Id: Ifce5a22493a52f3e15332bbf3c94ce7217d7d17c
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>

FROMLIST: dt-bindings: power: reset: add document for reboot-mode driver

add device tree bindings document for reboot-mode driver

Change-Id: I280e24e8c09e688e4f6dc51b7a1a658347f05db5
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

Documentation: add description of phy for sdhci-of-arasan

This patch adds phys and phy-names for sdhci-of-arasan as required
properties for arasan,sdhci-5.1, and details the example as well.

Change-Id: Ia3fc9c6284fc6f557b90fa880c9f2e8d01a4d3c2
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Documentation: rockchip-dw-mshc: add description for rk3399

Add "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc" for
dwmmc on rk3399 platform.

Change-Id: Ieefafab5f0e9650271e823659e2bec1556c4a9bc
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

ARM64: dts: rockchip: add emmc, sdio and sdmmc node for rk3399

This patch add emmc, sdio and sdmmc node to support
mmc stuff on rk3399 platform.

Change-Id: Ic15dfb48f8e1340aff9031a7dd75e98108772fe1
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

UPSTREAM: mmc: core: Enable tuning according to the actual timing

While in sdhci_execute_tuning() the choice whether or not to enable the
tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the
check is done on the capability of the card.

This difference is causing some issues with some SDIO cards in DDR50
mode where the CDM19 is wrongly issued.

With this patch we modify the check in both
mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision
only according to the actual timing specification.

Cc: stable@vger.kernel.org
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
(cherry picked from commit e10c321977091f163eceedec0650e0ef4b3cf4bb)

Change-Id: I5b72e0032bb55bc17bfae2ea81ee40801da7772b

UPSTREAM: mmc: core: Optimize boot time by detecting cards simultaneously

The mmc workqueue is an ordered workqueue, allowing only one work to
execute per given time. As this workqueue is used for card detection, the
conseqeunce is that cards will be detected one by one waiting for each
other.

Moreover, most of the time spent during card initialization is waiting for
the card's internal firmware to be ready. From a CPU perspective this
typically means waiting for a completion variable to be kicked via an
IRQ-handler or waiting for a sleep timer to finish.

This behaviour of detecting/initializing cards is sub-optimal, especially
for SOCs having several controllers/cards.

Let's convert to use the system_freezable_wq for the mmc detect works.
This enables several works to be executed simultaneously and thus also
cards to be detected like so.

Tests on UX500, which holds two eMMC cards and an SD-card (actually also
an SDIO card, currently not detected), shows a significant improved
behaviour due to this change.

Before this change, both the eMMC cards waited for the SD card to be
initialized as its detect work entered the workqueue first. In some cases,
depending on the characteristic of the SD-card, they got delayed 1-1.5 s.

Additionally for the second eMMC, it needed to wait for the first eMMC to
be initialized which added another 120-190 ms.

Converting to the system_freezable_wq, removed these delays and made both
the eMMC cards available far earlier in the boot sequence.

Selecting the system_freezable_wq, in favour of for example the system_wq,
is because we need card detection mechanism to be disabled once userspace
are frozen during system PM. Currently the mmc core deal with this via PM
notifiers, but following patches may utilize the behaviour of the
system_freezable_wq, to simplify the use of the PM notifiers.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Alan Cooper <alcooperx@gmail.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from commit 520bd7a8b4152aacfbd34eb7f7a447354b631039)

Change-Id: I52bc65649b285e825e931a370a9754d1475494dc

Merge tag 'v4.4.3'

This is the 4.4.3 stable release

Merge branch 'android-4.4' of https://android.googlesource.com/kernel/common

* android-4.4:
  video: adf: Fix modular build
  net: ppp: Fix modular build for PPPOLAC and PPPOPNS
  net: pppolac/pppopns: Replace msg.msg_iov with iov_iter_kvec()
  ANDROID: mmc: sdio: Disable retuning in sdio_reset_comm()
  ANDROID: mmc: Move tracepoint creation and export symbols
  ANDROID: kernel/watchdog: fix unused variable warning
  ANDROID: usb: gadget: f_mtp: don't use le16 for u8 field
  ANDROID: lowmemorykiller: fix declaration order warnings
  ANDROID: net: fix 'const' warnings
  net: diag: support v4mapped sockets in inet_diag_find_one_icsk()
  net: tcp: deal with listen sockets properly in tcp_abort.
  tcp: diag: add support for request sockets to tcp_abort()
  net: diag: Support destroying TCP sockets.
  net: diag: Support SOCK_DESTROY for inet sockets.
  net: diag: Add the ability to destroy a socket.
  net: diag: split inet_diag_dump_one_icsk into two
  Revert "mmc: Extend wakelock if bus is dead"
  Revert "mmc: core: Hold a wake lock accross delayed work + mmc rescan"
  ANDROID: mmc: move to a SCHED_FIFO thread

video: rockchip: tve: code sync from kernel-3.10

Change-Id: I677105f02c1be03a062cbe80b3883000b107ca91
Signed-off-by: Shen Zhenyi <szy@rock-chips.com>

ARM: dtsi: rk3036: tve add node to set value by user

Change-Id: If1e1043408f7489e00b94d0f8fa2564dbdc3159f
Signed-off-by: Shen Zhenyi <szy@rock-chips.com>

ARM: dtsi: rk312x: tve add node to set value by user

Change-Id: I57a8a295718fc8cc73644d4717183b4788f223b4
Signed-off-by: Shen Zhenyi <szy@rock-chips.com>

UPSTREAM: clk: skip unnecessary set_phase if nothing to do

Let's compare the degrees from clk_set_rate with
clk->core->phase. If the requested degrees is already
there, skip the following steps.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[sboyd@codeaurora.org: s/drgrees/degrees/ in commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from git.kernel.org clk/linux.git clk-next
 commit 023bd7166be0595d18220dfd5c9765b3970f6ef3)

Change-Id: Icc3be314e8f696a18bf0cd92867cd5f956817bbc

ARM64: dts: rk3368-tb-sheep: add grf offset property for dwc-control-usb

Change-Id: Ia706543dd3be235d74423376916b5d4864d44c06
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

ARM64: dts: rockchip: add usb otg node for rk3366

Change-Id: I1c641a9b622861142991b5a19b40b145c9fd903c
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

usb: dwc_otg: optimized grf and clk operation for rk336x board

Get grf offset form DT and optimize hclk_usb_peri clock process logic.

Change-Id: I136970c7052e5d621fd10e5d2b90f0fdac620067
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

ARM64: dts: rockchip: rk3366: add initial clock rate for vop

Change-Id: Iac586853a9acc4e396eabc01b31fb6d75dc61fcf
Signed-off-by: Feng Xiao <xf@rock-chips.com>

ARM64: dts: rockchip: rk3366-tb: add clk_ignore_unused in bootargs

Change-Id: I6b4cfd03141264da7368051c8d10f3eefbf27164
Signed-off-by: Feng Xiao <xf@rock-chips.com>

ARM64: dts: rockchip: rk3366: add initial clock rate for plls

Change-Id: I9ea6bcac10a7b67471613aea3ea41aff44a8fe34
Signed-off-by: Feng Xiao <xf@rock-chips.com>

clk: rockchip: rk3366: pll's rate support 480MHz 520MHz 576MHz 750Mhz

Change-Id: I56c75018ffd27a21ac87c2004eb5bd6a3b1e0e3d
Signed-off-by: Feng Xiao <xf@rock-chips.com>

video: adf: Fix modular build

Builds with ADF configured as module fail the following errors.

ERROR: "adf_fops" [drivers/video/adf/adf_sysfs.ko] undefined!
ERROR: "adf_obj_sysfs_find" [drivers/video/adf/adf_fops.ko] undefined!
ERROR: "adf_buffer_cleanup" [drivers/video/adf/adf_fops.ko] undefined!
ERROR: "adf_attachment_validate" [drivers/video/adf/adf_client.ko] undefined!
ERROR: "adf_attachment_find" [drivers/video/adf/adf_client.ko] undefined!
ERROR: "adf_buffer_mapping_cleanup" [drivers/video/adf/adf_client.ko] undefined!
ERROR: "adf_attachment_free" [drivers/video/adf/adf_client.ko] undefined!
ERROR: "adf_obj_find_event_refcount" [drivers/video/adf/adf_client.ko] undefined!
ERROR: "adf_file_queue_event" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_interface_sysfs_init" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_interface_sysfs_destroy" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_device_sysfs_init" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_device_sysfs_destroy" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_sysfs_destroy" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_overlay_engine_sysfs_init" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_overlay_engine_sysfs_destroy" [drivers/video/adf/adf.ko] undefined!
ERROR: "adf_sysfs_init" [drivers/video/adf/adf.ko] undefined!

If ADF is configured as module, each of the object files ends up being
a separate module. Since the functions are used across the various files
but not exported, this results in the observed build errors.
Modify the Makefile to create a single module instead.

Fixes: 066a50cee536 ("video: add atomic display framework")
Signed-off-by: Guenter Roeck <groeck@chromium.org>

net: ppp: Fix modular build for PPPOLAC and PPPOPNS

Unlike other configurations in net/ppp, PPPOLAC and PPPOPNS
are defined as boolean configuration options. In allmodconfig builds
(or, specifically, if PPP and some of the other PPP protocols were
built as modules), this resulted in build errors such as the following,
since pppox was built both as module and into the kernel.

ERROR: "pppox_ioctl" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "unregister_pppox_proto" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "register_pppox_proto" [net/l2tp/l2tp_ppp.ko] undefined!
ERROR: "pppox_unbind_sock" [net/l2tp/l2tp_ppp.ko] undefined!

Fix the problem by defining PPPOLAC and PPPOPNS tristate.

Signed-off-by: Guenter Roeck <groeck@chromium.org>

net: pppolac/pppopns: Replace msg.msg_iov with iov_iter_kvec()

Commit 1af89c1ef3b6 ("Hack: net: PPPoPNS and PPPoLAC build fixes for 4.1")
fixed the build for PPPoPNS and PPPoLAC by re-introducing a field in
struct msghdr which was removed upstream. Re-introducing the field doesn't
get it used, so it is quite likely that the code never worked. Fix it up for
good.

Fixes: 1af89c1ef3b6 ("Hack: net: PPPoPNS and PPPoLAC build fixes for 4.1")
Signed-off-by: Guenter Roeck <groeck@chromium.org>

video: rockchip: add win property node for application layer

Change-Id: I2e96d531d8fd1cf9eda665e4912501e4bec4d954
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

video: rockchip: fb: fix update reg kfree data lead to list_del null point

Change-Id: I5a9f3c795cf6f8ecbe9f45a769135fe890525fab
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
(cherry picked from commit fe05c53704fb3b61455dddbae8b5078be0f48a12)

video: rockchip: rk3288: fix extend screen type error

Change-Id: Ie1754c8ffa51f01637bf08f2fae443c821d8e09a
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
(cherry picked from commit b6403156107533cf97e6fe326576831af214f47d)

video: rockchip: lcdc: 3368: add support write back

Change-Id: Id4ae5fe8e0e3a6ae490bfa31594033a5eeba5233
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
(cherry picked from commit 96c50052a58b38f73432b9bf4156f1a9e6fdd023)

video: rockchip: add vop config for write back function

Change-Id: I8d27bb44fa1e8b30b422f2692a257ac9e0282f5e
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>
(cherry picked from commit e853ac5f48c0d6da970def84c465ce319ab6f1a8)

UPSTREAM: regulator: core: avoid unused variable warning

The second argument of the mutex_lock_nested() helper is only
evaluated if CONFIG_DEBUG_LOCK_ALLOC is set. Otherwise we
get this build warning for the new regulator_lock_supply
function:

drivers/regulator/core.c: In function 'regulator_lock_supply':
drivers/regulator/core.c:142:6: warning: unused variable 'i' [-Wunused-variable]

To avoid the warning, this restructures the code to make it
both simpler and to move the 'i++' outside of the mutex_lock_nested
call, where it is now always used and the variable is not
flagged as unused.

We had some discussion about changing mutex_lock_nested to an
inline function, which would make the code do the right thing here,
but in the end decided against it, in order to guarantee that
mutex_lock_nested() does not introduced overhead without
CONFIG_DEBUG_LOCK_ALLOC.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9f01cd4a915 ("regulator: core: introduce function to lock regulators and its supplies")
Link: http://permalink.gmane.org/gmane.linux.kernel/2068900
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit fa731ac7ea04a7d3a5c6d2f568132478c02a83b3)

Change-Id: Id700f411f2bcbe0cd49be332f329cd1b03768868

UPSTREAM: clk: rockchip: include downstream muxes into fractional dividers on rk3368

During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from git.kernel.org mmind/linux-rockchip.git v4.6-clk/next
 commit 7af8a26ce7055dd74853ea7c2b9752961e3491da)

Change-Id: I81e408089ff1095d4735072d3ddb15c3564f6970

arm64: dts: rockchip: remove unused files

Change-Id: I5264e3967cd6dfbe776d03bc77d7434656d58772
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

ARM64: dts: rockchip: rk3399 dtsi fix for upstream

Fix rk3399.dtsi for upstream, includes:
- remove psci related codes due to no impletement
- rmeove pmu node since wrong content
- add spi 3/4/5
- fix pmucru

Change-Id: I078874c35e66ef8301e40a753a2acbae9f10b852
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

ARM64: dts: rockchip: rk3366-tb: fix power_key gpio error

Change-Id: I698e300b3d34d2bb5e8f1b83f3c6655af7e5d15a
Signed-off-by: David Wu <david.wu@rock-chips.com>

clk: rockchip: update dt-binding header for rk3399 sdmmc/sdio

Add DRV/SAMPLE clock nodes for SDMMC/SDIO.

Change-Id: Ib23698f3b1b78bb7af42903fff8df34c3b62271f
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

pinctrl: rk3366: add support for rk3366

The drive strength control of rk3366 is very different from others'.
RK3366 soc adds N and P channel drive strength control, and we assume
they are the same value.

Change-Id: I45896f1483cb0a7550789df3bf84a0460cb21527
Signed-off-by: David Wu <david.wu@rock-chips.com>

ANDROID: mmc: sdio: Disable retuning in sdio_reset_comm()

Since sdio_reset_comm() re-initializes the SDIO card, disable retuning
before idling and shutting down the card.  Tuning will be re-enabled (if
necessary) in mmc_sdio_init_card().

BUG=chrome-os-partner:46444
TEST=With CL:311815, toggle WiFi on/off on Smaug and observe that the
WiFi card comes back up and is able to tune successfully.

Change-Id: Ib4a5cfd4d75fc9e3ed7bb3f1e2ffd30de16c5d28
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/311797
Reviewed-by: Derek Basehore <dbasehore@chromium.org>
[briannorris: brought from Chromium kernel in 3.18 -> 4.4 rebase]

Signed-off-by: Brian Norris <briannorris@google.com>

ANDROID: mmc: Move tracepoint creation and export symbols

Move the tracepoint creation to core from card, as core shouldn't depend
on card.

Also add EXPORT_SYMBOL_GPL calls to enable module build.

Change-Id: Ie39fcdadc0516df99600d0963efe09b6cd7a9bf8
Signed-off-by: Dylan Reid <dgreid@chromium.org>
(cherry picked from commit da5fbd1e7e50fee3a8271f50d25c848d0ede64b3,
from android-3.14)
Signed-off-by: Brian Norris <briannorris@google.com>

ANDROID: kernel/watchdog: fix unused variable warning

kernel/watchdog.c:122:22: warning: ‘hardlockup_allcpu_dumped’ defined but not used [-Wunused-variable]

Change-Id: I99e97e7cc31b589cd674fd4495832c9ef036d0b9
Signed-off-by: Brian Norris <briannorris@google.com>

ANDROID: usb: gadget: f_mtp: don't use le16 for u8 field

The 'bCount' field is u8. Noticed by this warning:

drivers/usb/gadget/function/f_mtp.c:264:3: warning: large integer implicitly truncated to unsigned type [-Woverflow]

Change-Id: Ie82dfd1a8986ecd3acf143e41c46822f0d1aca4f
Signed-off-by: Brian Norris <briannorris@google.com>

ANDROID: lowmemorykiller: fix declaration order warnings

drivers/staging/android/lowmemorykiller.c: In function ‘lowmem_scan’:
drivers/staging/android/lowmemorykiller.c:174:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]

Change-Id: I9de6cf2c374bc43131725a7ed666a033a4449ea9
Signed-off-by: Brian Norris <briannorris@google.com>

ANDROID: net: fix 'const' warnings

See the following build log splats. The sock_i_uid() helper doesn't
quite treat the parameter as 'const' (it acquires a member lock), but
this cast is the same approach taken by other callers in this file, so I
don't feel too bad about the fix.

  CC      net/ipv4/inet_connection_sock.o
  CC      net/ipv6/inet6_connection_sock.o
net/ipv6/inet6_connection_sock.c: In function ‘inet6_csk_route_req’:
net/ipv6/inet6_connection_sock.c:89:2: warning: passing argument 1 of ‘sock_i_uid’ discards ‘const’ qualifier from pointer target type [enabled by default]
In file included from include/linux/tcp.h:22:0,
                 from include/linux/ipv6.h:73,
                 from net/ipv6/inet6_connection_sock.c:18:
include/net/sock.h:1689:8: note: expected ‘struct sock *’ but argument is of type ‘const struct sock *’
net/ipv4/inet_connection_sock.c: In function ‘inet_csk_route_req’:
net/ipv4/inet_connection_sock.c:423:7: warning: passing argument 1 of ‘sock_i_uid’ discards ‘const’ qualifier from pointer target type [enabled by default]
In file included from include/net/inet_sock.h:27:0,
                 from include/net/inet_connection_sock.h:23,
                 from net/ipv4/inet_connection_sock.c:19:
include/net/sock.h:1689:8: note: expected ‘struct sock *’ but argument is of type ‘const struct sock *’
net/ipv4/inet_connection_sock.c: In function ‘inet_csk_route_child_sock’:
net/ipv4/inet_connection_sock.c:460:7: warning: passing argument 1 of ‘sock_i_uid’ discards ‘const’ qualifier from pointer target type [enabled by default]
In file included from include/net/inet_sock.h:27:0,
                 from include/net/inet_connection_sock.h:23,
                 from net/ipv4/inet_connection_sock.c:19:
include/net/sock.h:1689:8: note: expected ‘struct sock *’ but argument is of type ‘const struct sock *’

Change-Id: I5c156fc1a81f90323717bffd93c31d205b85620c
Signed-off-by: Brian Norris <briannorris@google.com>

video: rockchip: fb: fix double free when use devm_kzalloc() buf

Change-Id: I12872a61e2f07da23189cd57e2a355d73b98b005
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

video: rockchip: hdmi: skip operation when suspend or disabled

Change-Id: I294d338416a04d751ec5a5771e6b623ba7b69c02
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 0fdde42e0c459c9cc1b315cf2fbb0894d57ec0e4)

arm64: dts: rk3366-tb: sheep board default to use mipi screen

Change-Id: I239777aa4f95543be9c5699e459cd7326ccc4f2c
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

UPSTREAM: clk: rockchip: add a factor clock type

Add a clock type for fixed factor clocks. This allows us to define fixed
factor clocks where they appear in the clock hierarchy instead of in the
init function.

The additional factor_gate type, finally allows us to model some last
parts of the clock tree correctly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 29a30c269aba4223e2a8b443f443d7def1e43fea)

Change-Id: Ie4ec8b9d9199cdbe0be045c2ed4c270029e37949
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

clk: rockchip: update dt-binding header for rk3399

Separate the number of CRU and PMUCRU, and modify the date to 2016.

Change-Id: I235fc8a93640e13fb112f45bb3387542b07e1a87
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

mmc: dw_mmc-rockchip: fix failing to mount partition with "discard"

Without MMC_CAP_ERASE support, we fail to mount partition
with "discard" option since mmc_queue_setup_discard is limited
for checking mmc_can_erase. Without doing mmc_queue_setup_discard,
blk_queue_discard fails to test QUEUE_FLAG_DISCARD flag, so we get
the following log from f2fs(actually similar to other file system):

mounting with "discard" option, but the device does not support discard

Change-Id: Iee781795c9c61153644f0dd5b00dfc2cca6cc721
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

ARM64: dts: rockchip: add rga node for rk3366

Change-Id: Ib1853054a9935eb0d48b5eaf346e9f7e58c688ed
Signed-off-by: Shengqin.Zhang <zsq@rock-chips.com>

UPSTREAM: thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399

As the TRM says, add the tsadc_q_sel to control the temperature-code
sequence since the rk3228/rk3399 need set this bit (1024 - tsadc_q)
as output.

Fixes: commit
b0d7033 "thermal: rockchip: Support the RK3399 SoCs in thermal driver"
7b02a5e "thermal: rockchip: Support the RK3228 SoCs in thermal driver"

Reported-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
(cherry picked from git.kernel.org evalenti/linux-soc-thermal fixes
 commit 7ea38c6c3622bc65279dc6a1fecd28227027fbb5)

Change-Id: I9d39b947e197393688ed58bf079e519e7d5a6d9e

UPSTREAM: thermal: rockchip: the rename compatibles for rockchip SoCs

This patch renames to be more adapter compatibles since more and more
SoCs are supported in thermal driver.

Reported-by: Huang,Tao <huangtao@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
(cherry picked from git.kernel.org evalenti/linux-soc-thermal fixes
 commit 952418a34f26f252cd0afbca8c33a8506a03cab7)

Change-Id: Ia053d6877a16b36e357bd9b427b323703e5a514b

UPSTREAM: phy: core: fix wrong err handle for phy_power_on

If phy_pm_runtime_get_sync failed but we already
enable regulator, current code return directly without
doing regulator_disable. This patch fix this problem
and cleanup err handle of phy_power_on to be more readable.

Fixes: 3be88125d85d ("phy: core: Support regulator ...")
Cc: <stable@vger.kernel.org> # v3.18+
Cc: Roger Quadros <rogerq@ti.com>
Cc: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
(cherry picked from commit b82fcabe212a11698fd4b3e604d2f81d929d22f6)

Change-Id: I1cb5327d624d88a97096eccaa94924b851dcce27

rockchip: power & pmic: fix compile warning

fixed the WARNING: invalid free of devm_ allocated data

Change-Id: I54514cf53a8a0d1f885fd0a17e7f6db7af1d10f9
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

usb: dwc_otg: support to the latest usb gadget driver.

For gadget driver, usb_ep_caps is a new structrue in usb_ep, and its
attribute will be check in usb_ep_autoconfig method, so we need to do
some initialization work at ep creating.

Meanwhile, the process of android gadget driver have been changed,
correspondingly, udc_start and udc_stop are invoked differently from
before, so dwc_otg_gadget_stop method need to refactor and ajust
the new process.

Change-Id: Id1e20d4c265e0d382b0f36f6e729681f9c94c947
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

UPSTREAM: phy: add a driver for the Rockchip SoC internal eMMC PHY

This patch to add a generic PHY driver for ROCKCHIP eMMC PHY.
Access the PHY via registers provided by GRF (general register
files) module.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
(cherry picked from git.kernel.org kishon/linux-phy next
 commit 9743f1c935995a55ddd926943ee7b3cfb4718208)

Change-Id: Ia24ccd041392e64efd28868ffccc8da4419bd29f

UPSTREAM: Documentation: bindings: add dt documentation for Rockchip eMMC PHY

This patch adds a binding that describes the Rockchip eMMC PHYs
found on Rockchip SoCs eMMC interface.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
(cherry picked from git.kernel.org kishon/linux-phy next
 commit c9a1ddcac5b95a9dbf3d3f71d3be8b157239cce5)

Change-Id: I6913babddbc70c1ad3ea2234d8afac79190852a4

video: rockchip: tve: fix compile error and warning

Change-Id: Iacfc54e3f1c01cf3827cbb576d36f64145976bc1
Signed-off-by: Shen Zhenyi <szy@rock-chips.com>

ARM64: dts: rockchip: add io-domain node for rk3366

Change-Id: I774e717fb49a725f143ff21cd7c4969dbe66a2de
Signed-off-by: David Wu <david.wu@rock-chips.com>

POWER: AVS: rockchp: add rk3366 io domain supprot

Change-Id: I64eb48ee7e161306b941a851585c50a1ee0edae2
Signed-off-by: David Wu <david.wu@rock-chips.com>

video: rockchip: hdmi: v1: modify double free to avoid compile warning

rockchip_hdmiv1.c:375:1-6: WARNING: invalid free of devm_ allocated data

Change-Id: I0ab0b3d8f30a9c106e67f33ae93bc1df1b333fc2
Signed-off-by: xuhuicong <xhc@rock-chips.com>

ARM64: powerdomain: enable power domain debug config by default

enable PM_ADVANCED_DEBUG by default.
use pd debug get pd tree like this:
cat d/pm_genpd/pm_genpd_summary

Change-Id: I1ca27a7619cc0655c2256918d7b6530b6a637bcf
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

net: rfkill: fixed "WARNING: invalid free of devm_ allocated data"

Change-Id: I3c84a08e9d62d6f16e4f162708584f7fd716066b
Signed-off-by: xiaoyao <xiaoyao@rock-chips.com>

Linux 4.4.3