Brett Rudley [Fri, 19 Nov 2010 22:30:52 +0000 (14:30 -0800)]
staging: brcm80211: unifdef -UWLC_HIGH_ONLY
Part of BMAC removal.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 18 Nov 2010 19:46:44 +0000 (20:46 +0100)]
staging: brcm80211: replaced PKTSETLEN macro by native __skb_trim call
- removed PKTSETLEN macro and used __skb_trim call instead.
- removed unused macros PKTSETPOOL and PKTPOOL
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 18 Nov 2010 19:46:43 +0000 (20:46 +0100)]
staging: brcm80211: replace PKTPUSH and PKTPULL macros with native skbuff calls
Replacing PKTPUSH by skb_push() call and PKTPULL by skb_pull() call to make
it obvious what the operation is doing with the packet.
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Rapoport [Wed, 17 Nov 2010 08:00:00 +0000 (10:00 +0200)]
staging: brcm80211: brcmfmac: cleanup bcmsdh_(un)register
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Rapoport [Wed, 17 Nov 2010 07:58:46 +0000 (09:58 +0200)]
staging: brcm80211: brcmfmac: remove PCI SDIO controller binding
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Wed, 17 Nov 2010 15:57:57 +0000 (15:57 +0000)]
sst: remove rest of aava bits and aava related code
This removes the remaining bit of aava dependent and related bits from driver
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yong Wang [Wed, 17 Nov 2010 14:09:54 +0000 (22:09 +0800)]
staging: spectra: asynchronous init
The spectra nand driver takes quite some time to initialize because
it needs to scan the whole nand disk to find the latest block table.
This patch initializes the spectra nand driver asynchronously so that
other things in the kernel can initialize in parallel to the scanning
operation.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yong Wang [Wed, 17 Nov 2010 14:08:28 +0000 (22:08 +0800)]
staging: spectra: move all init logic into nand_pci_probe
Currently there are some driver initialization logic that
is not part of nand_pci_probe function. This will result in
that part of driver initialization code executing even on
platforms without the corresponding hardware which is always
dangerous.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Wed, 17 Nov 2010 08:54:35 +0000 (11:54 +0300)]
Staging: ft1000-usb: freeing uninitialized pointer
GCC complains that if (info->CardReady) is false we kfree() an
uninitialized pointer.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Wed, 17 Nov 2010 01:41:15 +0000 (17:41 -0800)]
staging: brcm80211: nicpci.c: replace osl based PCI calls with native linux pci calls
Get rid of the private PCI access routines and replace with standard calls from linux/pci.h in nicpci.c
(The private versions are still used in siutils.c... for now)
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Tue, 16 Nov 2010 23:45:48 +0000 (15:45 -0800)]
staging: brcm80211: s/osl_t/struct osl_info/g
Do the substitution (and then fix all the dang lines that were pushed past 80 columns.)
Some of the touched lines triggered checkpatch warnings for completely unrelated
reasons that were already there. Those will have to be addressed later.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Tue, 16 Nov 2010 21:16:59 +0000 (13:16 -0800)]
staging: brcm80211: completely remove osl_pubinfo_t typedef
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Tue, 16 Nov 2010 21:16:58 +0000 (13:16 -0800)]
staging: brcm80211: expose osl contents and start combining osl and pub_osl.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Sat, 13 Nov 2010 08:24:22 +0000 (11:24 +0300)]
Staging: bcm: signedness bug in InitCardAndDownloadFirmware()
status is used to store negative error codes throughout. The only place
where this is a runtime bug is if create_worker_threads() fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Sat, 13 Nov 2010 04:37:49 +0000 (07:37 +0300)]
Staging: bcm: signedness bug in StoreSFParam()
wrm() returns negative error codes so "ret" needs to be signed here.
There was place where wrm() returned positive EACCES instead of
negative -EACCES so I fixed that as well. Also a few checkpatch.pl
issues.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Sat, 13 Nov 2010 16:44:35 +0000 (08:44 -0800)]
staging: fix iio/gyro typos, build errors
Typo causes build errors. Did anyone even build this driver?
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Sat, 13 Nov 2010 09:05:32 +0000 (12:05 +0300)]
Staging: iio/dds: double locking bugs
This is a static checker patch and I don't have this hardware.
This code is unusual because while I've often seen a double lock, this
is the first time I've seen code that takes a lock 11 times in a row. I
feel like I must have missed something. But I've looked very carefully
I don't see any way the original code is correct. Does spi_sync()
somehow release the lock in a way that I can't see? Even if it does,
the locking would still be wrong.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Carpenter [Sat, 13 Nov 2010 08:34:16 +0000 (11:34 +0300)]
Staging: cptm1217: move free under dereference
We dereference "ts" in the printk so move the kfree() down a line.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Thu, 11 Nov 2010 18:44:22 +0000 (10:44 -0800)]
staging/easycap: make module params private/static, fix build
The easycap driver has module parameters (bars, gain, & debug)
with global scope that intrude on the kernel namespace and cause
build problems. Change the names of them to be driver-specific
and make 2 of them static.
drivers/built-in.o:(.bss+0x97c00): multiple definition of `debug'
ld: Warning: size of symbol `debug' changed from 58 in arch/x86/built-in.o to 4 in drivers/built-in.o
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Fri, 12 Nov 2010 22:47:02 +0000 (14:47 -0800)]
staging: fix ste_rmi4 build, depends on INPUT
The synaptics_i2c_rmi4 driver uses input_*() interfaces,
so it should depend on INPUT to fix its build errors:
ERROR: "input_event" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_free_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_register_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_set_abs_params" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_allocate_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_unregister_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: naveen.gaddipati@stericsson.com, js.ha@stericsson.com
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tushar Mehta [Tue, 16 Nov 2010 06:43:50 +0000 (12:13 +0530)]
Staging: autofs: fix coding style issue in dirhash.c
This is a patch to the dirhash.c file that fixes up a number of issues
found by the checkpatch.pl tool
Signed-off-by: Tushar Mehta <tushariiitb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brandon Philips [Mon, 15 Nov 2010 19:55:33 +0000 (11:55 -0800)]
staging: hv: add explanation of no-op set_multicast_list
I was going to remove netvsc_set_multicast_list() so I think it is worth
adding a comment since it isn't immediately clear why you would want
this.
Signed-off-by: Brandon Philips <brandon@ifup.org>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Mon, 15 Nov 2010 21:12:32 +0000 (13:12 -0800)]
drivers/staging: Remove unnecessary casts of netdev_priv
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Mon, 15 Nov 2010 20:14:00 +0000 (12:14 -0800)]
drivers/staging: Remove unnecessary casts of pci_get_drvdata
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Mon, 15 Nov 2010 03:04:48 +0000 (19:04 -0800)]
drivers/staging: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Rapoport [Sun, 14 Nov 2010 11:36:23 +0000 (13:36 +0200)]
staging: brcm80211: brcmfmac: remove PXA SDIO controller binding
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Rapoport [Sun, 14 Nov 2010 11:36:21 +0000 (13:36 +0200)]
staging: brcm80211: remove unused osl_pkt{get,free}_static
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Sat, 13 Nov 2010 02:10:17 +0000 (18:10 -0800)]
staging: brcm80211: get rid of last bit of pci configspace workaround.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Fri, 12 Nov 2010 23:28:30 +0000 (15:28 -0800)]
staging: brcm80211: simplify pci_config_read/write osl routines.
Start simplifying osl with goal of purging it entirely.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolas Kaiser [Sat, 13 Nov 2010 18:43:27 +0000 (19:43 +0100)]
staging: comedi: fix typo in error message
Fix typo in error message of dux commands allocation.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:54 +0000 (11:15 +0000)]
staging: vme: ca91cx42: mark the registers' base address pointer as __iomem
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:47 +0000 (11:15 +0000)]
staging: vme: tsi148: mark the registers' base address pointer as __iomem
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:40 +0000 (11:15 +0000)]
staging: vme: mark struct vme_master_resource's base address pointer as __iomem
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:34 +0000 (11:15 +0000)]
staging: vme_user: mark user-space buffers with __user
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:27 +0000 (11:15 +0000)]
staging: vme_user: remove __iomem marking from kern_buf and derivates
kern_buf is not iomem; it comes from kmalloc and is directly
dereferenced.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:21 +0000 (11:15 +0000)]
staging: vme_user: use an unsigned int for counting the number of kparams
unsigned int is what struct kparam_array internally uses.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:14 +0000 (11:15 +0000)]
staging: vme_user: declare private variables as static
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:07 +0000 (11:15 +0000)]
staging: vme: ca91cx42: declare static functions as such
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:15:00 +0000 (11:15 +0000)]
staging: vme: tsi148: declare static functions as such
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:54 +0000 (11:14 +0000)]
staging: vme: tsi148: remove unreachable line
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:47 +0000 (11:14 +0000)]
staging: vme: tsi148: fix warning in free_irq
The cookie passed to request_irq isn't the same as the one passed
to free_irq, which results in the following warning:
[ 63.243533] WARNING: at kernel/irq/manage.c:899 __free_irq+0x9b/0x17d()
[ 63.243533] Hardware name:
[ 63.243533] Trying to free already-free IRQ 17
[ 63.243533] Modules linked in: vme_tsi148(-) vme e1000e iTCO_wdt iTCO_vendor_support [last unloaded: scsi_wait_scan]
[ 63.243533] Pid: 2013, comm: rmmod Not tainted 2.6.35 #2
[ 63.243533] Call Trace:
[ 63.243533] [<
ffffffff81036ea3>] warn_slowpath_common+0x80/0x98
[ 63.243533] [<
ffffffff81036f4f>] warn_slowpath_fmt+0x41/0x43
[ 63.243533] [<
ffffffff810678c4>] __free_irq+0x9b/0x17d
[ 63.243533] [<
ffffffff810679d9>] free_irq+0x33/0x4e
[ 63.243533] [<
ffffffffa004a897>] tsi148_irq_exit+0x6b/0x70 [vme_tsi148]
[...]
[ 63.243533] ---[ end trace
bbf92311d969efb4 ]---
Fix it by passing the same cookie to both functions.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:40 +0000 (11:14 +0000)]
staging: vme: tsi148: remove double freeing of the IRQ in .remove
tsi148_irq_exit is called twice in .remove, which causes an oops.
Remove the second call, which apart from being redundant cannot
possibly work; the CR/CSR space has been already unmapped.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:34 +0000 (11:14 +0000)]
staging: vme: tsi148: use list_for_each_safe when deleting resources in .remove
This fixes an oops when removing the module.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:27 +0000 (11:14 +0000)]
staging: vme: fix bogus clearing of the bus number in vme_free_bus_num
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:20 +0000 (11:14 +0000)]
staging: vme_user: remove unreachable line
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:14 +0000 (11:14 +0000)]
staging: vme_user: return the appropriate error code when module_init fails
When init_module fails, 0 is returned anyway; the module is then installed
and oopses when we try to remove it:
[ 3236.368009] WARNING: at drivers/base/driver.c:262 driver_unregister+0x36/0x6f()
[ 3236.368012] Hardware name:
[ 3236.368014] Unexpected driver unregister!
[ 3236.368016] Modules linked in: vme_user(-) vme_tsi148 vme e1000e iTCO_wdt iTCO_vendor_support [last unloaded: vme]
[ 3236.368027] Pid: 16162, comm: rmmod Not tainted 2.6.35 #2
[ 3236.368029] Call Trace:
[ 3236.368037] [<
ffffffff81036ea3>] warn_slowpath_common+0x80/0x98
[ 3236.368044] [<
ffffffff81060a65>] ? __try_stop_module+0x0/0x58
[ 3236.368049] [<
ffffffff81036f4f>] warn_slowpath_fmt+0x41/0x43
[ 3236.368054] [<
ffffffff81060a65>] ? __try_stop_module+0x0/0x58
[ 3236.368059] [<
ffffffff811e8f78>] driver_unregister+0x36/0x6f
[ 3236.368066] [<
ffffffffa004aa44>] vme_unregister_driver+0xd/0xf [vme]
[ 3236.368072] [<
ffffffffa00616c8>] vme_user_exit+0x10/0x1e [vme_user]
[ 3236.368076] [<
ffffffff810612c1>] sys_delete_module+0x1ba/0x226
[ 3236.368082] [<
ffffffff812d6e14>] ? do_page_fault+0x25d/0x28a
[ 3236.368088] [<
ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[ 3236.368092] ---[ end trace
cab6d88ebc44c1de ]---
The appended fixes it by returning the appropriate error code in module_init
whenever something goes wrong, thus cancelling the insertion of the module.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Emilio G. Cota [Fri, 12 Nov 2010 11:14:07 +0000 (11:14 +0000)]
staging: vme: style: convert '&(foo)' to '&foo'
done with
find . -name '*.c' | xargs perl -p -i -e 's/&\(([^()]+)\)/&$1/g'
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steven Rostedt [Thu, 11 Nov 2010 16:29:25 +0000 (11:29 -0500)]
staging: ft1000: Copy from user into correct data
While doing a ktest.pl I used a MIN_CONFIG that had STAGING enabled, and
a randconfig with CONFIG_DEBUG_STRICT_USER_COPY_CHECKS enabled caught
the following bug:
In file included from /home/rostedt/work/autotest/nobackup/linux-test.git/arch/x86/include/asm/uaccess.h:571:0,
from /home/rostedt/work/autotest/nobackup/linux-test.git/include/linux/poll.h:14,
from /home/rostedt/work/autotest/nobackup/linux-test.git/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c:32:
In function 'copy_from_user',
inlined from 'ft1000_ChIoctl' at /home/rostedt/work/autotest/nobackup/linux-test.git/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c:702:36:
/home/rostedt/work/autotest/nobackup/linux-test.git/arch/x86/include/asm/uaccess_32.h:212:26: error: call to 'copy_from_user_overflow' declared with attribute error: copy_from_user() buffer size is not provably correct
Looking at the code it was obvious what the problem was. The pointer
dpram_data was being allocated but the address was being written to.
Looking at the comment above the code shows that it use to write into an
element of that pointer where the '&' is appropriate. But now that it
writes to the pointer itself, we need to remove the '&' otherwise we
write over the pointer and not into the data it points to.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Belisko [Fri, 12 Nov 2010 09:27:44 +0000 (10:27 +0100)]
staging: ft1000: Fix error goto statements.
With commit
2dab1ac81b4767095f96503a9ac093a68c6e9c95 there
was intruduced error which lead to stopping uninitialized
kthread which leads to kernel panics.
This patch fix problems with common entry point in correct
way.
Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 16 Nov 2010 18:44:50 +0000 (10:44 -0800)]
Staging: Merge 2.6.37-rc2 into staging-next
This was necessary in order to resolve some conflicts that happened
between -rc1 and -rc2 with the following files:
drivers/staging/bcm/Bcmchar.c
drivers/staging/intel_sst/intel_sst_app_interface.c
All should be resolved now.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Tue, 16 Nov 2010 02:31:02 +0000 (18:31 -0800)]
Linux 2.6.37-rc2
Eric Paris [Mon, 15 Nov 2010 23:36:29 +0000 (18:36 -0500)]
capabilities/syslog: open code cap_syslog logic to fix build failure
The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build
failure when CONFIG_PRINTK=n. This is because the capabilities code
which used the new option was built even though the variable in question
didn't exist.
The patch here fixes this by moving the capabilities checks out of the
LSM and into the caller. All (known) LSMs should have been calling the
capabilities hook already so it actually makes the code organization
better to eliminate the hook altogether.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 15 Nov 2010 22:06:11 +0000 (14:06 -0800)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
arm: omap1: devices: need to return with a value
OMAP1: camera.h: add missing include
omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts
OMAP2: Devkit8000: Fix mmc regulator failure
Linus Torvalds [Mon, 15 Nov 2010 22:05:44 +0000 (14:05 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (w83795) Check for BEEP pin availability
hwmon: (w83795) Clear intrusion alarm immediately
hwmon: (w83795) Read the intrusion state properly
hwmon: (w83795) Print the actual temperature channels as sources
hwmon: (w83795) List all usable temperature sources
hwmon: (w83795) Expose fan control method
hwmon: (w83795) Fix fan control mode attributes
hwmon: (lm95241) Check validity of input values
hwmon: Change mail address of Hans J. Koch
Linus Torvalds [Mon, 15 Nov 2010 22:03:17 +0000 (14:03 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Sanity checks on adapter registration
i2c: Mark i2c_adapter.id as deprecated
i2c: Drivers shouldn't include <linux/i2c-id.h>
i2c: Delete unused adapter IDs
i2c: Remove obsolete cleanup for clientdata
Linus Torvalds [Mon, 15 Nov 2010 22:01:33 +0000 (14:01 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: sysfs: fix printk warnings
PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
PCI: read current power state at enable time
PCI: fix size checks for mmap() on /proc/bus/pci files
x86/PCI: coalesce overlapping host bridge windows
PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
Jean Delvare [Mon, 15 Nov 2010 21:40:38 +0000 (22:40 +0100)]
i2c: Sanity checks on adapter registration
Make sure I2C adapters being registered have the required struct
fields set. If they don't, problems will happen later.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Mon, 15 Nov 2010 21:40:38 +0000 (22:40 +0100)]
i2c: Mark i2c_adapter.id as deprecated
It's about time to make it clear that i2c_adapter.id is deprecated.
Hopefully this will remind the last user to move over to a different
strategy.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Jean Delvare [Mon, 15 Nov 2010 21:40:38 +0000 (22:40 +0100)]
i2c: Drivers shouldn't include <linux/i2c-id.h>
Drivers don't need to include <linux/i2c-id.h>, especially not when
they don't use anything that header file provides.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Michael Hunold <michael@mihu.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Mon, 15 Nov 2010 21:40:38 +0000 (22:40 +0100)]
i2c: Delete unused adapter IDs
Delete unused I2C adapter IDs. Special cases are:
* I2C_HW_B_RIVA was still set in driver rivafb, however no other
driver is ever looking for this value, so we can safely remove it.
* I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no
adapter ID is ever set to this value, so the code in question never
runs. As the code additionally expects that I2C_HW_B_HDPVR may not
be defined, we can delete it now and let the lirc_zilog driver
maintainer rewrite this piece of code.
Big thanks for Hans Verkuil for doing all the hard work :)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Wolfram Sang [Mon, 15 Nov 2010 21:40:38 +0000 (22:40 +0100)]
i2c: Remove obsolete cleanup for clientdata
A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit. This is obsolete meanwhile, so fix it and hope the word will spread.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Linus Torvalds [Mon, 15 Nov 2010 21:37:37 +0000 (13:37 -0800)]
include/linux/kernel.h: Move logging bits to include/linux/printk.h
Move the logging bits from kernel.h into printk.h so that
there is a bit more logical separation of the generic from
the printk logging specific parts.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jim Bos [Mon, 15 Nov 2010 20:22:37 +0000 (21:22 +0100)]
Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)
The fix in commit
6b4e81db2552 ("i8k: Tell gcc that *regs gets
clobbered") to work around the gcc miscompiling i8k.c to add "+m
(*regs)" caused register pressure problems and a build failure.
Changing the 'asm' statement to 'asm volatile' instead should prevent
that and works around the gcc bug as well, so we can remove the "+m".
[ Background on the gcc bug: a memory clobber fails to mark the function
the asm resides in as non-pure (aka "__attribute__((const))"), so if
the function does nothing else that triggers the non-pure logic, gcc
will think that that function has no side effects at all. As a result,
callers will be mis-compiled.
Adding the "+m" made gcc see that it's not a pure function, and so
does "asm volatile". The problem was never really the need to mark
"*regs" as changed, since the memory clobber did that part - the
problem was just a bug in the gcc "pure" function analysis - Linus ]
Signed-off-by: Jim Bos <jim876@xs4all.nl>
Acked-by: Jakub Jelinek <jakub@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Mon, 15 Nov 2010 20:38:57 +0000 (21:38 +0100)]
hwmon: (w83795) Check for BEEP pin availability
On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.
The W83795G has a dedicated BEEP pin so the functionality is always
available there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:57 +0000 (21:38 +0100)]
hwmon: (w83795) Clear intrusion alarm immediately
When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: (w83795) Read the intrusion state properly
We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)
So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: (w83795) Print the actual temperature channels as sources
Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: (w83795) List all usable temperature sources
Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: (w83795) Expose fan control method
Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: (w83795) Fix fan control mode attributes
There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
It will be added back as a separate attribute, as per the standard
sysfs interface.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jean Delvare [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: (lm95241) Check validity of input values
This clears the following build-time warnings I was seeing:
drivers/hwmon/lm95241.c: In function "set_interval":
drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max2":
drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max1":
drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min2":
drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min1":
drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type2":
drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type1":
drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
This also fixes a small race in set_interval() as a side effect: by
working with a temporary local variable we prevent data->interval from
being accessed at a time it contains the interval value in the wrong
unit.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>
Hans J. Koch [Mon, 15 Nov 2010 20:38:56 +0000 (21:38 +0100)]
hwmon: Change mail address of Hans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Randy Dunlap [Sat, 13 Nov 2010 16:44:33 +0000 (08:44 -0800)]
PCI: sysfs: fix printk warnings
Cast pci_resource_start() and pci_resource_len() to u64 for printk.
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t'
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Linus Torvalds [Mon, 15 Nov 2010 16:43:29 +0000 (08:43 -0800)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Fix inode deallocation race
Linus Torvalds [Mon, 15 Nov 2010 16:43:04 +0000 (08:43 -0800)]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings
ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings
ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings
Linus Torvalds [Mon, 15 Nov 2010 16:42:07 +0000 (08:42 -0800)]
Merge branch 'fbdev-fixes-for-linus' of git://git./linux/kernel/git/lethal/fbdev-2.6
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
fsl-diu-fb: drop dead ioctl define
MAINTAINERS: Add an fbdev git tree entry.
OMAP: DSS: Fix documentation regarding 'vram' kernel parameter
OMAP: VRAM: Fix boot-time memory allocation
OMAP: VRAM: improve VRAM error prints
sisfb: limit POST memory test according to PCI resource length
fbdev: sh_mobile_lcdc: use correct number of modes, when using the default
fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing
fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug
Linus Torvalds [Mon, 15 Nov 2010 16:41:30 +0000 (08:41 -0800)]
Merge branches 'sh-fixes-for-linus' and 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: intc: Fix up build failure introduced by radix tree changes.
MAINTAINERS: update the sh git tree entry.
sh: clkfwk: fix up compiler warnings.
sh: intc: Fix up initializers for gcc 4.5.
rtc: rtc-sh - fix a memory leak
* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate
MAINTAINERS: update the ARM SH-Mobile git tree entry.
ARM: mach-shmobile: ap4evb: Mark NOR boot loader partitions read-only.
ARM: mach-shmobile: intc-sh7372: fix interrupt number
Steven Whitehouse [Wed, 3 Nov 2010 20:01:07 +0000 (20:01 +0000)]
GFS2: Fix inode deallocation race
This area of the code has always been a bit delicate due to the
subtleties of lock ordering. The problem is that for "normal"
alloc/dealloc, we always grab the inode locks first and the rgrp lock
later.
In order to ensure no races in looking up the unlinked, but still
allocated inodes, we need to hold the rgrp lock when we do the lookup,
which means that we can't take the inode glock.
The solution is to borrow the technique already used by NFS to solve
what is essentially the same problem (given an inode number, look up
the inode carefully, checking that it really is in the expected
state).
We cannot do that directly from the allocation code (lock ordering
again) so we give the job to the pre-existing delete workqueue and
carry on with the allocation as normal.
If we find there is no space, we do a journal flush (required anyway
if space from a deallocation is to be released) which should block
against the pending deallocations, so we should always get the space
back.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Paul Mundt [Mon, 15 Nov 2010 05:47:16 +0000 (14:47 +0900)]
Merge branch 'rmobile/core' into rmobile-fixes-for-linus
Kuninori Morimoto [Mon, 15 Nov 2010 03:11:09 +0000 (03:11 +0000)]
ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate
Tested-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Tested-by: TAKEI Mitsuharu <takei.andr@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 15 Nov 2010 05:30:30 +0000 (14:30 +0900)]
sh: intc: Fix up build failure introduced by radix tree changes.
The radix tree retry logic got a bit of an overhaul and subsequently
broke the virtual IRQ subgroup build. Simply switch over to
radix_tree_deref_retry() as per the filemap changes, which the virq
lookup logic was modelled after in the first place.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 15 Nov 2010 04:54:00 +0000 (13:54 +0900)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into sh/urgent
Mike Frysinger [Sat, 13 Nov 2010 07:06:27 +0000 (02:06 -0500)]
fsl-diu-fb: drop dead ioctl define
The fsl-diu-fb driver no longer uses this define, and we have a common one
to cover this already (FBIO_WAITFORVSYNC).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 15 Nov 2010 04:25:31 +0000 (13:25 +0900)]
MAINTAINERS: Add an fbdev git tree entry.
Now that there's an fbdev git tree (this is also what is pulled in to
-next), stub it in to the MAINTAINERS entry.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Sun, 14 Nov 2010 21:06:37 +0000 (13:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: Fix slub_lock down/up imbalance
Linus Torvalds [Sun, 14 Nov 2010 21:04:53 +0000 (13:04 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Change some lock status member in ocfs2_lock_res to char.
Pavel Emelyanov [Thu, 28 Oct 2010 09:50:37 +0000 (13:50 +0400)]
slub: Fix slub_lock down/up imbalance
There are two places, that do not release the slub_lock.
Respective bugs were introduced by sysfs changes
ab4d5ed5 (slub: Enable
sysfs support for !CONFIG_SLUB_DEBUG) and
2bce6485 ( slub: Allow removal
of slab caches during boot).
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Linus Torvalds [Sat, 13 Nov 2010 18:00:15 +0000 (10:00 -0800)]
Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
drivers/pcmcia/soc_common.c: Use printf extension %pV
pcmcia: fix warning in synclink driver
pcmcia/sa1100: don't put machine specific init functions in .init.text
pcmcia/cm4000: fix error code
pd6729: Coding Style fixes
Ingo Molnar [Sat, 13 Nov 2010 15:21:58 +0000 (16:21 +0100)]
Revert "8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang"
This reverts commit
47d3904fe40d62deee8cd46e79ca784e7a548acd.
Crashes any x86 serial console bootup:
Console: colour VGA+ 80x25
BUG: unable to handle kernel NULL pointer dereference at
0000000000000158
IP: [<
ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430
...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Nov 2010 17:55:56 +0000 (09:55 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: padlock - Fix AES-CBC handling on odd-block-sized input
crypto: n2 - dubious error check
Linus Torvalds [Sat, 13 Nov 2010 17:55:19 +0000 (09:55 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] soc-camera: Compile fixes for mx2-camera
[media] SoC Camera: ov6650: minor cleanups
[media] SOC Camera: OMAP1: typo fix
[media] SoC Camera: OMAP1: update for recent videobuf changes
[media] SoC Camera: OMAP1: update for recent framework changes
[media] ARM mx3_camera: check for DMA engine type
[media] tm6000: bugfix set tv standards
[media] cafe_ccic: fix subdev configuration
[media] saa7134: Fix autodetect for Behold A7 and H7 TV cards
[media] v4l: kill the BKL
[media] BZ#22292: dibx000_common: Restore i2c algo pointer
Jim Bos [Sat, 13 Nov 2010 11:13:53 +0000 (12:13 +0100)]
i8k: Tell gcc that *regs gets clobbered
More recent GCC caused the i8k driver to stop working, on Slackware
compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't
work anymore, meaning the driver didn't load or gave total nonsensical
output.
As it turned out the asm(..) statement forgot to mention it modifies the
*regs variable.
Credits to Andi Kleen and Andreas Schwab for providing the fix.
Signed-off-by: Jim Bos <jim876@xs4all.nl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Jones [Sat, 13 Nov 2010 05:58:54 +0000 (00:58 -0500)]
ACPI: debugfs custom_method open to non-root
Currently we have:
--w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method
which is just crazy. Change this to --w-------.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@kernel.org (for 2.6.36)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tao Ma [Sat, 13 Nov 2010 08:22:02 +0000 (16:22 +0800)]
ocfs2: Change some lock status member in ocfs2_lock_res to char.
Commit
83fd9c7 changes l_level, l_requested and l_blocking of
ocfs2_lock_res from int to unsigned char. But actually it is
initially as -1(ocfs2_lock_res_init_common) which
correspoding to 255 for unsigned char. So the whole dlm lock
mechanism doesn't work now which means a disaster to ocfs2.
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Kukjin Kim [Sat, 13 Nov 2010 07:11:46 +0000 (16:11 +0900)]
ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings
This patch fixes followng build warnings.
warning: (ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> ||
ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>)
selects HAVE_S3C_RTC which has unmet direct dependencies (RTC_CLASS)
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kukjin Kim [Sat, 13 Nov 2010 07:08:32 +0000 (16:08 +0900)]
ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings
This patch fixes following warnings.
warning: (ARCH_S3C2410 && <choice> || ARCH_S3C64XX && <choice> ||
ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> ||
ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>)
selects HAVE_S3C2410_I2C which has unmet direct dependencies (I2C)
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Kyungmin Park [Sat, 13 Nov 2010 07:01:59 +0000 (16:01 +0900)]
ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings
Fix build warnings
warning: (ARCH_S3C64XX && <choice> && WATCHDOG || ARCH_S5P64X0 && <choice> && WATCHDOG ||
ARCH_S5P6442 && <choice> && WATCHDOG || ARCH_S5PC100 && <choice> ||
ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice> || MACH_SMDK6410 && ARCH_S3C64XX)
selects HAVE_S3C2410_WATCHDOG which has unmet direct dependencies (WATCHDOG)
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: Added fix same warning(mach-s3c64xx/Kconfig)]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Linus Torvalds [Sat, 13 Nov 2010 01:17:55 +0000 (17:17 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)
can-bcm: fix minor heap overflow
gianfar: Do not call device_set_wakeup_enable() under a spinlock
ipv6: Warn users if maximum number of routes is reached.
docs: Add neigh/gc_thresh3 and route/max_size documentation.
axnet_cs: fix resume problem for some Ax88790 chip
ipv6: addrconf: don't remove address state on ifdown if the address is being kept
tcp: Don't change unlocked socket state in tcp_v4_err().
x25: Prevent crashing when parsing bad X.25 facilities
cxgb4vf: add call to Firmware to reset VF State.
cxgb4vf: Fail open if link_start() fails.
cxgb4vf: flesh out PCI Device ID Table ...
cxgb4vf: fix some errors in Gather List to skb conversion
cxgb4vf: fix bug in Generic Receive Offload
cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue()
ixgbe: Look inside vlan when determining offload protocol.
bnx2x: Look inside vlan when determining checksum proto.
vlan: Add function to retrieve EtherType from vlan packets.
virtio-net: init link state correctly
ucc_geth: Fix deadlock
ucc_geth: Do not bring the whole IF down when TX failure.
...
Linus Torvalds [Sat, 13 Nov 2010 01:17:09 +0000 (17:17 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
drivers/ata/pata_octeon_cf.c: delete double assignment
pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test
libata: fix NULL sdev dereference race in atapi_qc_complete()
Linus Torvalds [Sat, 13 Nov 2010 01:14:20 +0000 (17:14 -0800)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits)
Revert "staging: tidspbridge: replace iommu custom for opensource implementation"
Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c"
Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name"
Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c"
Revert "staging: tidspbridge - fix mmufault support"
Revert "staging: tidspbridge - remove hw directory"
Revert "staging: tidspbridge - move all iommu related code to a new file"
Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct"
Revert "staging: tidspbridge - remove reserved memory clean up"
Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions"
Revert "staging: tidspbridge - remove dmm custom module"
Revert "staging: tidspbridge - update Kconfig to select IOMMU module"
staging: tidspbridge: hardcode SCM macros while fix is upstreamed
Staging: keucr driver: fix uninitialized variable & proper memset length
omap: dsp: remove shm from normal memory
Staging: wlan-ng: Fix wrong #ifdef #endif sequence
Staging: Update parameters for cfg80211 key management operation
Staging: ath6kl: Fix pointer casts on 64-bit architectures
Staging: batman-adv: suppress false warning when changing the mac address
Staging: batman-adv: fix interface alternating and bonding reggression
...