fork: protect architectures where THREAD_SIZE >= PAGE_SIZE against fork bombs

Because those architectures will draw their stacks directly from the page
allocator, rather than the slab cache, we can directly pass __GFP_KMEMCG
flag, and issue the corresponding free_pages.

This code path is taken when the architecture doesn't define
CONFIG_ARCH_THREAD_INFO_ALLOCATOR (only ia64 seems to), and has
THREAD_SIZE >= PAGE_SIZE.  Luckily, most - if not all - of the remaining
architectures fall in this category.

This will guarantee that every stack page is accounted to the memcg the
process currently lives on, and will have the allocations to fail if they
go over limit.

For the time being, I am defining a new variant of THREADINFO_GFP, not to
mess with the other path.  Once the slab is also tracked by memcg, we can
get rid of that flag.

Tested to successfully protect against :(){ :|:& };:

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Frederic Weisbecker <fweisbec@redhat.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: execute the whole memcg freeing in free_worker()

A lot of the initialization we do in mem_cgroup_create() is done with
softirqs enabled.  This include grabbing a css id, which holds
&ss->id_lock->rlock, and the per-zone trees, which holds
rtpz->lock->rlock.  All of those signal to the lockdep mechanism that
those locks can be used in SOFTIRQ-ON-W context.

This means that the freeing of memcg structure must happen in a
compatible context, otherwise we'll get a deadlock, like the one below,
caught by lockdep:

   free_accounted_pages+0x47/0x4c
   free_task+0x31/0x5c
   __put_task_struct+0xc2/0xdb
   put_task_struct+0x1e/0x22
   delayed_put_task_struct+0x7a/0x98
   __rcu_process_callbacks+0x269/0x3df
   rcu_process_callbacks+0x31/0x5b
   __do_softirq+0x122/0x277

This usage pattern could not be triggered before kmem came into play.
With the introduction of kmem stack handling, it is possible that we call
the last mem_cgroup_put() from the task destructor, which is run in an rcu
callback.  Such callbacks are run with softirqs disabled, leading to the
offensive usage pattern.

In general, we have little, if any, means to guarantee in which context
the last memcg_put will happen.  The best we can do is test it and try to
make sure no invalid context releases are happening.  But as we add more
code to memcg, the possible interactions grow in number and expose more
ways to get context conflicts.  One thing to keep in mind, is that part of
the freeing process is already deferred to a worker, such as vfree(), that
can only be called from process context.

For the moment, the only two functions we really need moved away are:

  * free_css_id(), and
  * mem_cgroup_remove_from_trees().

But because the later accesses per-zone info,
free_mem_cgroup_per_zone_info() needs to be moved as well.  With that, we
are left with the per_cpu stats only.  Better move it all.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Tested-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: allow a memcg with kmem charges to be destructed

Because the ultimate goal of the kmem tracking in memcg is to track slab
pages as well, we can't guarantee that we'll always be able to point a
page to a particular process, and migrate the charges along with it -
since in the common case, a page will contain data belonging to multiple
processes.

Because of that, when we destroy a memcg, we only make sure the
destruction will succeed by discounting the kmem charges from the user
charges when we try to empty the cgroup.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: use static branches when code not in use

We can use static branches to patch the code in or out when not used.

Because the _ACTIVE bit on kmem_accounted is only set after the increment
is done, we guarantee that the root memcg will always be selected for kmem
charges until all call sites are patched (see memcg_kmem_enabled).  This
guarantees that no mischarges are applied.

Static branch decrement happens when the last reference count from the
kmem accounting in memcg dies.  This will only happen when the charges
drop down to 0.

When that happens, we need to disable the static branch only on those
memcgs that enabled it.  To achieve this, we would be forced to complicate
the code by keeping track of which memcgs were the ones that actually
enabled limits, and which ones got it from its parents.

It is a lot simpler just to do static_key_slow_inc() on every child
that is accounted.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: kmem accounting lifecycle management

Because kmem charges can outlive the cgroup, we need to make sure that we
won't free the memcg structure while charges are still in flight.  For
reviewing simplicity, the charge functions will issue mem_cgroup_get() at
every charge, and mem_cgroup_put() at every uncharge.

This can get expensive, however, and we can do better.  mem_cgroup_get()
only really needs to be issued once: when the first limit is set.  In the
same spirit, we only need to issue mem_cgroup_put() when the last charge
is gone.

We'll need an extra bit in kmem_account_flags for that:
KMEM_ACCOUNTED_DEAD.  it will be set when the cgroup dies, if there are
charges in the group.  If there aren't, we can proceed right away.

Our uncharge function will have to test that bit every time the charges
drop to 0.  Because that is not the likely output of res_counter_uncharge,
this should not impose a big hit on us: it is certainly much better than a
reference count decrease at every operation.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

res_counter: return amount of charges after res_counter_uncharge()

It is useful to know how many charges are still left after a call to
res_counter_uncharge.  While it is possible to issue a res_counter_read
after uncharge, this can be racy.

If we need, for instance, to take some action when the counters drop down
to 0, only one of the callers should see it.  This is the same semantics
as the atomic variables in the kernel.

Since the current return value is void, we don't need to worry about
anything breaking due to this change: nobody relied on that, and only
users appearing from now on will be checking this value.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: allocate kernel pages to the right memcg

When a process tries to allocate a page with the __GFP_KMEMCG flag, the
page allocator will call the corresponding memcg functions to validate
the allocation.  Tasks in the root memcg can always proceed.

To avoid adding markers to the page - and a kmem flag that would
necessarily follow, as much as doing page_cgroup lookups for no reason,
whoever is marking its allocations with __GFP_KMEMCG flag is responsible
for telling the page allocator that this is such an allocation at
free_pages() time.  This is done by the invocation of
__free_accounted_pages() and free_accounted_pages().

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: kmem controller infrastructure

Introduce infrastructure for tracking kernel memory pages to a given
memcg.  This will happen whenever the caller includes the flag
__GFP_KMEMCG flag, and the task belong to a memcg other than the root.

In memcontrol.h those functions are wrapped in inline acessors.  The idea
is to later on, patch those with static branches, so we don't incur any
overhead when no mem cgroups with limited kmem are being used.

Users of this functionality shall interact with the memcg core code
through the following functions:

memcg_kmem_newpage_charge: will return true if the group can handle the
                           allocation. At this point, struct page is not
                           yet allocated.

memcg_kmem_commit_charge: will either revert the charge, if struct page
                          allocation failed, or embed memcg information
                          into page_cgroup.

memcg_kmem_uncharge_page: called at free time, will revert the charge.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add a __GFP_KMEMCG flag

This flag is used to indicate to the callees that this allocation is a
kernel allocation in process context, and should be accounted to current's
memcg.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: kmem accounting basic infrastructure

Add the basic infrastructure for the accounting of kernel memory.  To
control that, the following files are created:

 * memory.kmem.usage_in_bytes
 * memory.kmem.limit_in_bytes
 * memory.kmem.failcnt
 * memory.kmem.max_usage_in_bytes

They have the same meaning of their user memory counterparts.  They
reflect the state of the "kmem" res_counter.

Per cgroup kmem memory accounting is not enabled until a limit is set for
the group.  Once the limit is set the accounting cannot be disabled for
that group.  This means that after the patch is applied, no behavioral
changes exists for whoever is still using memcg to control their memory
usage, until memory.kmem.limit_in_bytes is set for the first time.

We always account to both user and kernel resource_counters.  This
effectively means that an independent kernel limit is in place when the
limit is set to a lower value than the user memory.  A equal or higher
value means that the user limit will always hit first, meaning that kmem
is effectively unlimited.

People who want to track kernel memory but not limit it, can set this
limit to a very high number (like RESOURCE_MAX - 1page - that no one will
ever hit, or equal to the user memory)

[akpm@linux-foundation.org: MEMCG_MMEM only works with slab and slub]
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: change defines to an enum

This is just a cleanup patch for clarity of expression.  In earlier
submissions, people asked it to be in a separate patch, so here it is.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: reclaim when more than one page needed

mem_cgroup_do_charge() was written before kmem accounting, and expects
three cases: being called for 1 page, being called for a stock of 32
pages, or being called for a hugepage.  If we call for 2 or 3 pages (and
both the stack and several slabs used in process creation are such, at
least with the debug options I had), it assumed it's being called for
stock and just retried without reclaiming.

Fix that by passing down a minsize argument in addition to the csize.

And what to do about that (csize == PAGE_SIZE && ret) retry?  If it's
needed at all (and presumably is since it's there, perhaps to handle
races), then it should be extended to more than PAGE_SIZE, yet how far?
And should there be a retry count limit, of what?  For now retry up to
COSTLY_ORDER (as page_alloc.c does) and make sure not to do it if
__GFP_NORETRY.

v4: fixed nr pages calculation pointed out by Christoph Lameter.

Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: make it possible to use the stock for more than one page

We currently have a percpu stock cache scheme that charges one page at a
time from memcg->res, the user counter.  When the kernel memory controller
comes into play, we'll need to charge more than that.

This is because kernel memory allocations will also draw from the user
counter, and can be bigger than a single page, as it is the case with the
stack (usually 2 pages) or some higher order slabs.

[glommer@parallels.com: added a changelog ]
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory-hotplug: document and enable CONFIG_MOVABLE_NODE

Add help info for CONFIG_MOVABLE_NODE and permit its selection.

This option allows the user to online all memory of a node as movable
memory.  So that the whole node can be hotplugged.  Users who don't use
the hotplug feature are also fine with this option on since they won't
online memory as movable.

Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
[akpm@linux-foundation.org: tweak help text]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: remove duplicate check

While allocating pages using buddy allocator, the compound page is
probably split up to free pages.  Under these circumstances, the compound
page should be destroyed by destroy_compound_page().  However, there is a
duplicate check to judge if the page is compound.

Remove the duplicate check since the compound_order() returns 0 when the
page doesn't have PG_head set in destroy_compound_page().  That is to say,
destroy_compound_page() needn't check PageHead().

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/message/fusion/mptscsih.c: missing break

This happens to do the right thing in all cases on fibre channel but not on
other media types

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Cc: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

h8300: select generic atomic64_t support

Rationales from Eric:

So I just looked a little deeper and it appears architectures that do
not support atomic64_t are broken.

The generic atomic64 support came in 2009 to support the perf subsystem
with the expectation that all architectures would implement atomic64
support.

Furthermore upon inspection of the kernel atomic64_t is used in a fair
number of places beyond the performance counters:

block/blk-cgroup.c
drivers/acpi/apei/
drivers/block/rbd.c
drivers/crypto/nx/nx.h
drivers/gpu/drm/radeon/radeon.h
drivers/infiniband/hw/ipath/
drivers/infiniband/hw/qib/
drivers/staging/octeon/
fs/xfs/
include/linux/perf_event.h
include/net/netfilter/nf_conntrack_acct.h
kernel/events/
kernel/trace/
net/mac80211/key.h
net/rds/

The block control group, infiniband, xfs, crypto, 802.11, netfilter.
Nothing quite so fundamental as fs/namespace.c but definitely in
multiplatform-code that should work, and is already broken on those
architecutres.

Looking at the implementation of atomic64_add_return in lib/atomic64.c the
code looks as efficient as these kinds of things get.

Which leads me to the conclusion that we need atomic64 support on all
architectures.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Coccinelle: add api/d_find_alias.cocci

Ensure that calls to d_find_alias() have a corresponding dput().

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Gilles Muller <Gilles.Muller@lip6.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

irq: tsk->comm is an array

The array check is useless so remove it.

[akpm@linux-foundation.org: remove comment, per David]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ceph: fix dentry reference leak in ceph_encode_fh()

dput() was not called in the error path.

Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/x86/platform/iris/iris.c: register a platform device and a platform driver

This makes the iris driver use the platform API, so it is properly exposed
in /sys.

[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout]
Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CRIS: fix I/O macros

The inb/outb macros for CRIS are broken from a number of points of view,
missing () around parameters and they have an unprotected if statement
in them.  This was breaking the compile of IPMI on CRIS and thus I was
being annoyed by build regressions, so I fixed them.

Plus I don't think they would have worked at all, since the data values
were missing "&" and the outsl had a "3" instead of a "4" for the size.
From what I can tell, this stuff is not used at all, so this can't be
any more broken than it was before, anyway.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: locomolcd: fix checkpatch error and warning

This patch fixes the checkpatch error and warning as below:

  WARNING: space prohibited between function name and open parenthesis '('
  ERROR: trailing statements should be on next line

Also, long comments are fixed for the preferred style and unnecessary
lines are removed.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'slab/for-linus' of git://git./linux/kernel/git/penberg/linux

Pull SLAB changes from Pekka Enberg:
 "This contains preparational work from Christoph Lameter and Glauber
  Costa for SLAB memcg and cleanups and improvements from Ezequiel
  Garcia and Joonsoo Kim.

  Please note that the SLOB cleanup commit from Arnd Bergmann already
  appears in your tree but I had also merged it myself which is why it
  shows up in the shortlog."

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm/sl[aou]b: Common alignment code
  slab: Use the new create_boot_cache function to simplify bootstrap
  slub: Use statically allocated kmem_cache boot structure for bootstrap
  mm, sl[au]b: create common functions for boot slab creation
  slab: Simplify bootstrap
  slub: Use correct cpu_slab on dead cpu
  mm: fix slab.c kernel-doc warnings
  mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN
  slab: Ignore internal flags in cache creation
  mm/slob: Use free_page instead of put_page for page-size kmalloc allocations
  mm/sl[aou]b: Move common kmem_cache_size() to slab.h
  mm/slob: Use object_size field in kmem_cache_size()
  mm/slob: Drop usage of page->private for storing page-sized allocations
  slub: Commonize slab_cache field in struct page
  sl[au]b: Process slabinfo_show in common code
  mm/sl[au]b: Move print_slabinfo_header to slab_common.c
  mm/sl[au]b: Move slabinfo processing to slab_common.c
  slub: remove one code path and reduce lock contention in __slab_free()

Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull (again) user namespace infrastructure changes from Eric Biederman:
 "Those bugs, those darn embarrasing bugs just want don't want to get
  fixed.

  Linus I just updated my mirror of your kernel.org tree and it appears
  you successfully pulled everything except the last 4 commits that fix
  those embarrasing bugs.

  When you get a chance can you please repull my branch"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns: Fix typo in description of the limitation of userns_install
  userns: Add a more complete capability subset test to commit_creds
  userns: Require CAP_SYS_ADMIN for most uses of setns.
  Fix cap_capable to only allow owners in the parent user namespace to have caps.

Merge branch 'for-linus' of git://git./linux/kernel/git/lliubbo/blackfin

Pull blackfin update from Bob Liu.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
  blackfin: SEC: clean up SEC interrupt initialization
  blackfin: kgdb: call generic_exec_single() directly
  blackfin: anomaly: add anomaly 16000030 for bf5xx
  Blackfin: dpmc: use module_platform_driver macro
  Blackfin: remove unused is_in_rom()
  Blackfin: remove unnecessary prototype for kobjsize()
  Blackfin: twi: Add missing __iomem annotation
  Blackfin: Annotate strnlen_user and strlen_user 'src' parameter with __user
  Blackfin: Annotate clear_user 'to' parameter with __user
  Blackfin: Add missing __user annotations to put_user
  Blackfin: Annotate strncpy_from_user src parameter with __user
  blackfin: Use Kbuild infrastructure for kvm_para.h
  UAPI: (Scripted) Disintegrate arch/blackfin/include/asm

Merge tag 'disintegrate-alpha-20121217' of git://git.infradead.org/users/dhowells/linux-headers

Pull UAPI disintegration for Alpha from David Howells:
 "I've been asked to send the Alpha UAPI disintegration to you directly.
  The acks I have been given have been added into the patch."

* tag 'disintegrate-alpha-20121217' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate arch/alpha/include/asm

Merge tag 'for-3.8' of git://openrisc.net/~jonas/linux

Pull OpenRISC update from Jonas Bonn:
 "Trivial cleanups for OpenRISC."

* tag 'for-3.8' of git://openrisc.net/~jonas/linux:
  openrisc: use kbuild.h instead of defining macros in asm-offset.c
  openrisc: Use Kbuild infrastructure for kvm_para.h

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 update #2 from Martin Schwidefsky:
 "The main patch is the function measurement blocks extension for PCI to
  do performance statistics and help with debugging.  The other patch is
  a small cleanup in ccwdev.h."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ccwdev: Include asm/schid.h.
  s390/pci: performance statistics and debug infrastructure

Merge branch 'next' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlight is probably some base POWER8 support.  There's more
  to come such as transactional memory support but that will wait for
  the next one.

  Overall it's pretty quiet, or rather I've been pretty poor at picking
  things up from patchwork and reviewing them this time around and Kumar
  no better on the FSL side it seems..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
  powerpc+of: Rename and fix OF reconfig notifier error inject module
  powerpc: mpc5200: Add a3m071 board support
  powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
  powerpc/mpc52xx: use module_platform_driver macro
  powerpc+of: Export of_reconfig_notifier_[register,unregister]
  powerpc/dma/raidengine: add raidengine device
  powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
  powerpc/mpc85xx: Change spin table to cached memory
  powerpc/fsl-pci: Add PCI controller ATMU PM support
  powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
  drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
  powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
  powerpc: Disable relocation on exceptions when kexecing
  powerpc: Enable relocation on during exceptions at boot
  powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
  powerpc: Add wrappers to enable/disable relocation on exceptions
  powerpc: Add set_mode hcall
  powerpc: Setup relocation on exceptions for bare metal systems
  powerpc: Move initial mfspr LPCR out of __init_LPCR
  powerpc: Add relocation on exception vector handlers
  ...

x86, paravirt: fix build error when thp is disabled

With CONFIG_PARAVIRT=y and CONFIG_TRANSPARENT_HUGEPAGE=n, the build breaks
because set_pmd_at() is undeclared:

  mm/memory.c: In function 'do_pmd_numa_page':
  mm/memory.c:3520: error: implicit declaration of function 'set_pmd_at'
  mm/mprotect.c: In function 'change_pmd_protnuma':
  mm/mprotect.c:120: error: implicit declaration of function 'set_pmd_at'

This is because paravirt defines set_pmd_at() only when
CONFIG_TRANSPARENT_HUGEPAGE=y and such a restriction is unneeded.  The
fix is to define it for all CONFIG_PARAVIRT configurations.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd

Pull exofs changes from Boaz Harrosh:
 "These are just 3 patches, the last two are bug fixes on the error
  paths in exofs.

  The important patch is the one to osd_uld which adds sysfs info to osd
  devices for use by user-mode clustering discovery software.  I'm
  already sitting on this patch since before February this year, It is
  important for some of the big installation cluster systems, who's been
  compiling their own kernel just for that patch."

Ugh.  The osd_uld patch already went through the SCSI tree, so this was
kind of pointless.  But at least it has the two small error-path fixes..

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: don't leak io_state and pages on read error
  exofs: clean up the correct page collection on write error
  osduld: Add osdname & systemid sysfs at scsi_osd class

Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs update from Chris Mason:
 "A big set of fixes and features.

  In terms of line count, most of the code comes from Stefan, who added
  the ability to replace a single drive in place.  This is different
  from how btrfs normally replaces drives, and is much much much faster.

  Josef is plowing through our synchronous write performance.  This pull
  request does not include the DIO_OWN_WAITING patch that was discussed
  on the list, but it has a number of other improvements to cut down our
  latencies and CPU time during fsync/O_DIRECT writes.

  Miao Xie has a big series of fixes and is spreading out ordered
  operations over more CPUs.  This improves performance and reduces
  contention.

  I've put in fixes for error handling around hash collisions.  These
  are going back to individual stable kernels as I test against them.

  Otherwise we have a lot of fixes and cleanups, thanks everyone!
  raid5/6 is being rebased against the device replacement code.  I'll
  have it posted this Friday along with a nice series of benchmarks."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (115 commits)
  Btrfs: fix a bug of per-file nocow
  Btrfs: fix hash overflow handling
  Btrfs: don't take inode delalloc mutex if we're a free space inode
  Btrfs: fix autodefrag and umount lockup
  Btrfs: fix permissions of empty files not affected by umask
  Btrfs: put raid properties into global table
  Btrfs: fix BUG() in scrub when first superblock reading gives EIO
  Btrfs: do not call file_update_time in aio_write
  Btrfs: only unlock and relock if we have to
  Btrfs: use tokens where we can in the tree log
  Btrfs: optimize leaf_space_used
  Btrfs: don't memset new tokens
  Btrfs: only clear dirty on the buffer if it is marked as dirty
  Btrfs: move checks in set_page_dirty under DEBUG
  Btrfs: log changed inodes based on the extent map tree
  Btrfs: add path->really_keep_locks
  Btrfs: do not mark ems as prealloc if we are writing to them
  Btrfs: keep track of the extents original block length
  Btrfs: inline csums if we're fsyncing
  Btrfs: don't bother copying if we're only logging the inode
  ...

Merge tag 'nfs-for-3.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Features include:

   - Full audit of BUG_ON asserts in the NFS, SUNRPC and lockd client
     code.  Remove altogether where possible, and replace with
     WARN_ON_ONCE and appropriate error returns where not.
   - NFSv4.1 client adds session dynamic slot table management.  There
     is matching server side code that has been submitted to Bruce for
     consideration.

     Together, this code allows the server to dynamically manage the
     amount of memory it allocates to the duplicate request cache for
     each client.  It will constantly resize those caches to reserve
     more memory for clients that are hot while shrinking caches for
     those that are quiescent.

  In addition, there are assorted bugfixes for the generic NFS write
  code, fixes to deal with the drop_nlink() warnings, and yet another
  fix for NFSv4 getacl."

* tag 'nfs-for-3.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (106 commits)
  SUNRPC: continue run over clients list on PipeFS event instead of break
  NFS: Don't use SetPageError in the NFS writeback code
  SUNRPC: variable 'svsk' is unused in function bc_send_request
  SUNRPC: Handle ECONNREFUSED in xs_local_setup_socket
  NFSv4.1: Deal effectively with interrupted RPC calls.
  NFSv4.1: Move the RPC timestamp out of the slot.
  NFSv4.1: Try to deal with NFS4ERR_SEQ_MISORDERED.
  NFS: nfs_lookup_revalidate should not trust an inode with i_nlink == 0
  NFS: Fix calls to drop_nlink()
  NFS: Ensure that we always drop inodes that have been marked as stale
  nfs: Remove unused list nfs4_clientid_list
  nfs: Remove duplicate function declaration in internal.h
  NFS: avoid NULL dereference in nfs_destroy_server
  SUNRPC handle EKEYEXPIRED in call_refreshresult
  SUNRPC set gss gc_expiry to full lifetime
  nfs: fix page dirtying in NFS DIO read codepath
  nfs: don't zero out the rest of the page if we hit the EOF on a DIO READ
  NFSv4.1: Be conservative about the client highest slotid
  NFSv4.1: Handle NFS4ERR_BADSLOT errors correctly
  nfs: don't extend writes to cover entire page if pagecache is invalid
  ...

Merge tag 'md-3.8' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Mostly just little fixes.  Probably biggest part is AVX accelerated
  RAID6 calculations."

* tag 'md-3.8' of git://neil.brown.name/md:
  md/raid5: add blktrace calls
  md/raid5: use async_tx_quiesce() instead of open-coding it.
  md: Use ->curr_resync as last completed request when cleanly aborting resync.
  lib/raid6: build proper files on corresponding arch
  lib/raid6: Add AVX2 optimized gen_syndrome functions
  lib/raid6: Add AVX2 optimized recovery functions
  md: Update checkpoint of resync/recovery based on time.
  md:Add place to update ->recovery_cp.
  md.c: re-indent various 'switch' statements.
  md: close race between removing and adding a device.
  md: removed unused variable in calc_sb_1_csm.

Merge branch 'slab/next' into slab/for-linus

Fix up a trivial merge conflict with commit baaf1dd ("mm/slob: use
min_t() to compare ARCH_SLAB_MINALIGN") that did not go through the slab
tree.

Conflicts:
mm/slob.c

Signed-off-by: Pekka Enberg <penberg@kernel.org>

Merge branch 'slab/procfs' into slab/for-linus

Merge branch 'akpm' (Andrew's patch-bomb)

Merge misc patches from Andrew Morton:
 "Incoming:

   - lots of misc stuff

   - backlight tree updates

   - lib/ updates

   - Oleg's percpu-rwsem changes

   - checkpatch

   - rtc

   - aoe

   - more checkpoint/restart support

  I still have a pile of MM stuff pending - Pekka should be merging
  later today after which that is good to go.  A number of other things
  are twiddling thumbs awaiting maintainer merges."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
  scatterlist: don't BUG when we can trivially return a proper error.
  docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output
  fs, fanotify: add @mflags field to fanotify output
  docs: add documentation about /proc/<pid>/fdinfo/<fd> output
  fs, notify: add procfs fdinfo helper
  fs, exportfs: add exportfs_encode_inode_fh() helper
  fs, exportfs: escape nil dereference if no s_export_op present
  fs, epoll: add procfs fdinfo helper
  fs, eventfd: add procfs fdinfo helper
  procfs: add ability to plug in auxiliary fdinfo providers
  tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test
  breakpoint selftests: print failure status instead of cause make error
  kcmp selftests: print fail status instead of cause make error
  kcmp selftests: make run_tests fix
  mem-hotplug selftests: print failure status instead of cause make error
  cpu-hotplug selftests: print failure status instead of cause make error
  mqueue selftests: print failure status instead of cause make error
  vm selftests: print failure status instead of cause make error
  ubifs: use prandom_bytes
  mtd: nandsim: use prandom_bytes
  ...

efi: Fix the build with user namespaces enabled.

When compiling efivars.c the build fails with:

   CC      drivers/firmware/efivars.o
  drivers/firmware/efivars.c: In function ‘efivarfs_get_inode’:
  drivers/firmware/efivars.c:886:31: error: incompatible types when assigning to type ‘kgid_t’ from type ‘int’
  make[2]: *** [drivers/firmware/efivars.o] Error 1
  make[1]: *** [drivers/firmware/efivars.o] Error 2

Fix the build error by removing the duplicate initialization of i_uid and
i_gid inode_init_always has already initialized them to 0.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,numa: fix update_mmu_cache_pmd call

This build error is currently hidden by the fact that the x86
implementation of 'update_mmu_cache_pmd()' is a macro that doesn't use
its last argument, but commit b32967ff101a ("mm: numa: Add THP migration
for the NUMA working set scanning fault case") introduced a call with
the wrong third argument.

In the akpm tree, it causes this build error:

  mm/migrate.c: In function 'migrate_misplaced_transhuge_page_put':
  mm/migrate.c:1666:2: error: incompatible type for argument 3 of 'update_mmu_cache_pmd'
  arch/x86/include/asm/pgtable.h:792:20: note: expected 'struct pmd_t *' but argument is of type 'pmd_t'

Fix it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scatterlist: don't BUG when we can trivially return a proper error.

There is absolutely no reason to crash the kernel when we have a
perfectly good return value already available to use for conveying
failure status.

Let's return an error code instead of crashing the kernel: that sounds
like a much better plan.

[akpm@linux-foundation.org: s/E2BIG/EINVAL/]
Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, fanotify: add @mflags field to fanotify output

The kernel keeps FAN_MARK_IGNORED_SURV_MODIFY bit separately from
fsnotify_mark::mask|ignored_mask thus put it in @mflags (mark flags)
field so the user-space reader will be able to detect if such bit were
used on mark creation procedure.

 | pos: 0
 | flags: 04002
 | fanotify flags:10 event-flags:0
 | fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
 | fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: add documentation about /proc/<pid>/fdinfo/<fd> output

[akpm@linux-foundation.org: tweak documentation]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, notify: add procfs fdinfo helper

This allow us to print out fsnotify details such as watchee inode, device,
mask and optionally a file handle.

For inotify objects if kernel compiled with exportfs support the output
will be

 | pos: 0
 | flags: 02000000
 | inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
 | inotify wd:2 ino:a111 sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:11a1000020542153
 | inotify wd:1 ino:6b149 sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:49b1060023552153

If kernel compiled without exportfs support, the file handle
won't be provided but inode and device only.

 | pos: 0
 | flags: 02000000
 | inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0
 | inotify wd:2 ino:a111 sdev:800013 mask:800afce ignored_mask:0
 | inotify wd:1 ino:6b149 sdev:800013 mask:800afce ignored_mask:0

For fanotify the output is like

 | pos: 0
 | flags: 04002
 | fanotify flags:10 event-flags:0
 | fanotify mnt_id:12 mask:3b ignored_mask:0
 | fanotify ino:50205 sdev:800013 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:05020500fb1d47e7

To minimize impact on general fsnotify code the new functionality
is gathered in fs/notify/fdinfo.c file.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, exportfs: add exportfs_encode_inode_fh() helper

We will need this helper in the next patch to provide a file handle for
inotify marks in /proc/pid/fdinfo output.

The patch is rather providing the way to use inodes directly when dentry
is not available (like in case of inotify system).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, exportfs: escape nil dereference if no s_export_op present

This routine will be used to generate a file handle in fdinfo output for
inotify subsystem, where if no s_export_op present the general
export_encode_fh should be used.  Thus add a test if s_export_op present
inside exportfs_encode_fh itself.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, epoll: add procfs fdinfo helper

This allows us to print out eventpoll target file descriptor, events and
data, the /proc/pid/fdinfo/fd consists of

 | pos: 0
 | flags: 02
 | tfd:        5 events:       1d data: ffffffffffffffff enabled: 1

[avagin@: fix for unitialized ret variable]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs, eventfd: add procfs fdinfo helper

This allows us to print out raw counter value.  The /proc/pid/fdinfo/fd
output is

 | pos: 0
 | flags: 04002
 | eventfd-count:               5a

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: add ability to plug in auxiliary fdinfo providers

This patch brings ability to print out auxiliary data associated with
file in procfs interface /proc/pid/fdinfo/fd.

In particular further patches make eventfd, evenpoll, signalfd and
fsnotify to print additional information complete enough to restore
these objects after checkpoint.

To simplify the code we add show_fdinfo callback inside struct
file_operations (as Al and Pavel are proposing).

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test

I was curious why sys_kcmp wasn't working, which led me to the testcase.
It turned out I hadn't enabled CHECKPOINT_RESTORE in the kernel I was
testing.  Add a decoding of errno to the testcase to make that obvious.

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

breakpoint selftests: print failure status instead of cause make error

In case breakpoint test exit non zero value it will cause make error.
Better way is just print the test failure status.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcmp selftests: print fail status instead of cause make error

In case kcmp_test exit non zero value it will cause make error.
Better way is just print the test failure status.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcmp selftests: make run_tests fix

make run_tests need the target is run_tests instead of run-tests
Also gcc output should be kcmp_test. Fix these two issues.

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem-hotplug selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

After applying the patch:
  bash-4.1$ make -C memory-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  memory-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/memory-hotplug'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpu-hotplug selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  ./on-off-test.sh
  make: execvp: ./on-off-test.sh: Permission denied
  make: *** [run_tests] Error 127
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

After applying the patch:
  bash-4.1$ make -C cpu-hotplug run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'
  /bin/sh: ./on-off-test.sh: Permission denied
  cpu-hotplug selftests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/cpu-hotplug'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mqueue selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  ./mq_open_tests /test1
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

After applying the patch:
  bash-4.1$ make -C mqueue run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_open_tests: [FAIL]
  Not running as root, but almost all tests require root in order to modify
  system settings.  Exiting.
  mq_perf_tests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/mqueue'

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vm selftests: print failure status instead of cause make error

Original behavior:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  /bin/sh ./run_vmtests
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  make: *** [run_tests] Error 1
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

After applying the patch:
  bash-4.1$ make -C vm run_tests
  make: Entering directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'
  ./run_vmtests: line 24: /proc/sys/vm/nr_hugepages: Permission denied
  Please run this test as root
  vmtests: [FAIL]
  make: Leaving directory `/home/dave/git/linux-2.6/tools/testing/selftests/vm'

Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubifs: use prandom_bytes

This also converts filling memory loop to use memset.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: David Laight <david.laight@aculab.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mtd: nandsim: use prandom_bytes

This also removes unnecessary memset call which is immediately overwritten
with random bytes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bnx2x: use prandom_bytes()

Use prandom_bytes() to fill rss key with pseudo-random bytes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Laight <david.laight@aculab.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

prandom: introduce prandom_bytes() and prandom_bytes_state()

Add functions to get the requested number of pseudo-random bytes.

The difference from get_random_bytes() is that it generates pseudo-random
numbers by prandom_u32().  It doesn't consume the entropy pool, and the
sequence is reproducible if the same rnd_state is used.  So it is suitable
for generating random bytes for testing.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

random32: rename random32 to prandom

This renames all random32 functions to have 'prandom_' prefix as follows:

  void prandom_seed(u32 seed); /* rename from srandom32() */
  u32 prandom_u32(void); /* rename from random32() */
  void prandom_seed_state(struct rnd_state *state, u64 seed);
   /* rename from prandom32_seed() */
  u32 prandom_u32_state(struct rnd_state *state);
   /* rename from prandom32() */

The purpose of this renaming is to prevent some kernel developers from
assuming that prandom32() and random32() might imply that only
prandom32() was the one using a pseudo-random number generator by
prandom32's "p", and the result may be a very embarassing security
exposure.  This concern was expressed by Theodore Ts'o.

And furthermore, I'm going to introduce new functions for getting the
requested number of pseudo-random bytes.  If I continue to use both
prandom32 and random32 prefixes for these functions, the confusion
is getting worse.

As a result of this renaming, "prandom_" is the common prefix for
pseudo-random number library.

Currently, srandom32() and random32() are preserved because it is
difficult to rename too many users at once.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: David Laight <david.laight@aculab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: fix use after free in aoedev_by_aoeaddr()

We should return NULL on failure instead of returning a freed pointer.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: update internal version number to 81

This version number is printed to the console on module initialization
and is available in sysfs, which is where the userland aoe-version tool
looks for it.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: identify source of runt AoE packets

This change only affects experimental AoE storage networks.

It modifies the console message about runt packets detected so that the
AoE major and minor addresses of the AoE target that generated the runt
are mentioned.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: allow comma separator in aoe_iflist value

By default, the aoe driver uses any ethernet interface for AoE, but the
aoe_iflist module parameter provides a convenient way to limit AoE
traffic to a specific list of local network interfaces.

This change allows a list to be specified using the comma character as a
separator.  For example,

  modprobe aoe aoe_iflist=eth2,eth3

Before, it was inconvenient to get the quoting right in shell scripts
when setting aoe_iflist to have more than one network interface.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: allow user to disable target failure timeout

With this change, the aoe driver treats the value zero as special for
the aoe_deadsecs module parameter.  Normally, this value specifies the
number of seconds during which the driver will continue to attempt
retransmits to an unresponsive AoE target.  After aoe_deadsecs has
elapsed, the aoe driver marks the aoe device as "down" and fails all
I/O.

The new meaning of an aoe_deadsecs of zero is for the driver to
retransmit commands indefinitely.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: use dynamic number of remote ports for AoE storage target

Many AoE targets have four or fewer network ports, but some existing
storage devices have many, and the AoE protocol sets no limit.

This patch allows the use of more than eight remote MAC addresses per AoE
target, while reducing the amount of memory used by the aoe driver in
cases where there are many AoE targets with fewer than eight MAC addresses
each.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: avoid races between device destruction and discovery

This change avoids a race that could result in a NULL pointer derference
following a WARNing from kobject_add_internal, "don't try to register
things with the same name in the same directory."

The problem was found with a test that forgets and discovers an
aoe device in a loop:

  while test ! -r /tmp/stop; do
aoe-flush -a
aoe-discover
  done

The race was between aoedev_flush taking aoedevs out of the devlist,
allowing a new discovery of the same AoE target to take place before the
driver gets around to calling sysfs_remove_group.  Fixing that one
revealed another race between do_open and add_disk, and this patch avoids
that, too.

The fix required some care, because for flushing (forgetting) an aoedev,
some of the steps must be performed under lock and some must be able to
sleep.  Also, for discovering a new aoedev, some steps might sleep.

The check for a bad aoedev pointer remains from a time when about half of
this patch was done, and it was possible for the
bdev->bd_disk->private_data to become corrupted.  The check should be
removed eventually, but it is not expected to add significant overhead,
occurring in the aoeblk_open routine.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: improve handling of misbehaving network paths

An AoE target can have multiple network ports used for AoE, and in the
aoe driver, those are tracked by the aoetgt struct.  These changes allow
the aoe driver to handle network paths, or aoetgts, that are not working
well, compared to the others.

Paths that do not get responses despite the retransmission of AoE
commands are marked as "tainted", and non-tainted paths are preferred.

Meanwhile, the aoe driver attempts to "probe" the tainted path in the
background by issuing reads of LBA 0 that are padded out to full
(possibly jumbo-frame) size.  If the probes get responses, then the path
is "redeemed", and its taint is removed.

This mechanism has been shown to be helpful in transparently handling
and recovering from real-world network "brown outs" in ways that the
earlier "shoot the help-needing target in the head" mechanism could not.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: return real minor number for static minors

The value returned by the static minor device number number allocator is
the real minor number, so it must be multiplied by the supported number
of partitions per aoedev.

Without this fix the support for systems without udev is incomplete, and
the few users of aoe on such systems will have surprising results when
device nodes names do not match the AoE target.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: initialize sysminor to avoid compiler warning

Because the minor_get and related functions use the return values for
errors, the compiler doesn't know that sysminor will always either 1) be
initialized in aoedev_by_aoeaddr by the call to minor_get, or 2) be
unused as the "goto out" is executed.

This patch avoids the compiler warning.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: make error messages more specific in static minor allocation

For some special-purpose systems where udev isn't present, static
allocation of minor numbers is desirable.  This update distinguishes
different failure scenarios, to help the user understand what went
wrong.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: remove call to request handler from I/O completion

There is no need to call the request handler function in the I/O
completion routine.  The user impact of not doing it is a more "nice" aoe
driver that is less susceptible to causing soft lockups.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: cleanup: correct comment for aoetgt nout

A misplaced comment was attached to the nout member of the aoetgt.  This
change corrects the comment.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: increase default cap on outstanding AoE commands in the network

The aoe driver will never be waiting for more than aoe_maxout AoE
commands from a given remote network port on an AoE target.  Increasing
the cap increases performance.  Users can tighten the setting to reduce
the amount of memory used for handling AoE traffic or the network
bandwidth used for AoE.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: remove vestigial request queue allocation

Before the aoe driver was an I/O request handler, it was a
make_request-style block driver.  Even so, there was a problem where
sysfs expected a request queue to exist, so one was provided in commit
7135a71b19be ("aoe: allocate unused request_queue for sysfs").

During the transition to the request-handler style, a patch was merged
that was based on a driver without the noop queue, and the noop queue
remained in place after the patch was merged, even though a new
functional queue was introduced by the patch, allocated through
blk_init_queue.

The user impact is a memory leak proportional to the number of AoE
targets discovered.  This patch removes the memory leak and cleans up
vestiges of the old do-nothing queue from the aoeblk_gdalloc function.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: copy fallback timing information on destination failover

Commit f3b8e07af774 ("aoe: commands in retransmit queue use new
destination on failure") omits the copying of the coarse-grained time
when an AoE command was sent during the failover from one destination
MAC address on the AoE target to another.

The coarse-grained timing is only used when the system time changes or
an unlikely length of time has passed since the sending of the AoE
command.  Users will not be impacted unless their system clock is very
inaccurate or something unusual (e.g., 10 GbE link reset) happens during
the period when the aoe driver is handling the failure of a port on the
AoE target.  Being effected will mean that an AoE target could be
considered "down" too eagerly.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: update driver-internal version to 64+

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: commands in retransmit queue use new destination on failure

When one remote MAC address isn't working as a destination for AoE
commands, the frames used to track information associated with the AoE
commands are moved to a new aoetgt (defined by the tuple of {AoE major,
AoE minor, target MAC address}).

This patch makes sure that the frames on the queue for retransmits that
need to be done are updated to use the new destination, so that
retransmits will be sent through a working network path.

Without this change, packets on the retransmit queue will be needlessly
retransmitted to the unresponsive destination MAC, possibly causing
premature target failure before there's time for the retransmit timer to
run again, decide to retransmit again, and finally update the destination
to a working MAC address on the AoE target.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: use high-resolution RTTs with fallback to low-res

These changes improve the accuracy of the decision about whether it's time
to retransmit an AoE command by using the microsecond-resolution
gettimeofday instead of jiffies.

Because the system time can jump suddenly, the decision reverts to using
jiffies if the high-resolution time difference is relatively large.
Otherwise the AoE targets could be considered failed inappropriately.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: manipulate aoedev network stats under lock

With this bugfix in place the calculation of the criterion for "lateness"
is performed under lock.  Without the lock, there is a chance that one of
the non-atomic operations performed on the round trip time statistics
could be incomplete, such that an incorrect lateness criterion would be
calculated.

Without this change, the effect of the bug would be rare unecessary but
benign retransmissions.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: err device: include MAC addresses for unexpected responses

The /dev/etherd/err character device provides low-level information about
normal but sometimes interesting AoE command retransmits and "unexpected
responses", i.e., responses for packets that have already been
retransmitted.

This change adds MAC addresses to the messages about unexpected responses,
so that when they occur, it's more easy to determine the network paths to
which they belong.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: improve network congestion handling

The aoe driver already had some congestion handling, but it was limited in
its ability to cope with the kind of congestion that can arise on more
complex networks such as those involving paths through multiple ethernet
switches.

Some of the lessons from TCP's history of development can be applied to
improving the congestion control and avoidance on AoE storage networks.
These changes use familar concepts from Van Jacobson's "Congestion
Avoidance and Control" paper from '88, without adding significant
overhead.

This patch depends on an upcoming patch that covers the failover case when
AoE commands being retransmitted are transferred from one retransmit queue
to another.  Another upcoming patch increases the timing accuracy.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: provide ATA identify device content to user on request

Make the aoe driver follow expected behavior when the user uses ioctl to
get the ATA device identify information, allowing access to model, serial
number, etc.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: update driver-internal version number to 60

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: whitespace cleanup

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: cleanup: remove unused ata_scnt function

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: "payload" sysfs file exports per-AoE-command data transfer size

The userland aoetools package includes an "aoe-stat" command that can
display a "payload size" column when the aoe driver exports this
information.  Users can quickly see what amount of user data is
transferred inside each AoE command on the network, network headers
excluded.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: support larger I/O requests via aoe_maxsectors module param

The GPFS filesystem is an example of an aoe user that requires the aoe
driver to support I/O request sizes larger than the default.  Most users
will not need large I/O request sizes, because they would need to be split
up into multiple AoE commands anyway.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: support the forgetting (flushing) of a user-specified AoE target

Users sometimes want to cause the aoe driver to forget a particular
previously discovered device when it is no longer online.  The aoetools
provide an "aoe-flush" command that users run to perform this
administrative task.  The changes below provide the support needed in the
driver.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: update cap on outstanding commands based on config query response

The ATA over Ethernet config query response contains a "buffer count"
field reflecting the AoE target's capacity to buffer incoming AoE
commands.

By taking the current value of this field into accound, we increase
performance throughput or avoid network congestion, when the value
has increased or decreased, respectively.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: print warning regarding a common reason for dropped transmits

Dropped transmits are not common, but when they do occur, increasing
the transmit queue length often helps.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aoe: describe the behavior of the "err" character device

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/sparse.txt: document context annotations for lock checking

The context feature of sparse is used with the Linux kernel sources to
check for imbalanced uses of locks.  Document the annotations defined in
include/linux/compiler.h that tell sparse what to expect when a lock is
held on function entry, exit, or both.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Christopher Li <sparse@chrisli.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/compiler.h: add __must_hold macro for functions called with a lock held

linux/compiler.h has macros to denote functions that acquire or release
locks, but not to denote functions called with a lock held that return
with the lock still held.  Add a __must_hold macro to cover that case.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Ed Cashin <ecashin@coraid.com>
Tested-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pidns: remove unused is_container_init()

Since commit 1cdcbec1a337 ("CRED: Neuter sys_capset()")
is_container_init() has no callers.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: use -ELOOP for max recursion depth

To avoid an explosion of request_module calls on a chain of abusive
scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon
as maximum recursion depth is hit, the error will fail all the way back
up the chain, aborting immediately.

This also has the side-effect of stopping the user's shell from attempting
to reexecute the top-level file as a shell script. As seen in the
dash source:

        if (cmd != path_bshell && errno == ENOEXEC) {
                *argv-- = cmd;
                *argv = cmd = path_bshell;
                goto repeat;
        }

The above logic was designed for running scripts automatically that lacked
the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC,
things continue to behave as the shell expects.

Additionally, when tracking recursion, the binfmt handlers should not be
involved. The recursion being tracked is the depth of calls through
search_binary_handler(), so that function should be exclusively responsible
for tracking the depth.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: pid/status: show all supplementary groups

We display a list of supplementary group for each process in
/proc/<pid>/status.  However, we show only the first 32 groups, not all of
them.

Although this is rare, but sometimes processes do have more than 32
supplementary groups, and this kernel limitation breaks user-space apps
that rely on the group list in /proc/<pid>/status.

Number 32 comes from the internal NGROUPS_SMALL macro which defines the
length for the internal kernel "small" groups buffer.  There is no
apparent reason to limit to this value.

This patch removes the 32 groups printing limit.

The Linux kernel limits the amount of supplementary groups by NGROUPS_MAX,
which is currently set to 65536.  And this is the maximum count of groups
we may possibly print.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>