Revert "USB: quatech2: only write to the tty if the port is open."

This reverts commit 27b351c5546008c640b3e65152f60ca74b3706f1.  It caused
problems with the build.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bill Pemberton <wfp5p@viridian.itc.virginia.edu>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 3.9-rc3 into tty-next

driver: tty: vt: remove cast for kmalloc return value

remove cast for kmalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver: tty: serial: remove cast for kzalloc return value

remove cast for kzalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: serial, stop accessing potential NULLs

The following commits:
* 6732c8bb8671acbdac6cdc93dd72ddd581dd5e25 (TTY: switch
  tty_schedule_flip)
* 2e124b4a390ca85325fae75764bef92f0547fa25 (TTY: switch
  tty_flip_buffer_push)
* 05c7cd39907184328f48d3e7899f9cdd653ad336 (TTY: switch
  tty_insert_flip_string)
* 92a19f9cec9a80ad93c06e115822deb729e2c6ad (TTY: switch
  tty_insert_flip_char)
* 227434f8986c3827a1faedd1feb437acd6285315 (TTY: switch
  tty_buffer_request_room to tty_port)

introduced a potential NULL dereference to some drivers. In
particular, when the device is used as a console, incoming bytes can
kill the box. This is caused by removed checks for TTY against NULL.

It happened because it was unclear to me why the checks were there. I
assumed them superfluous because the interrupts were unbound or
otherwise stopped. But this is not the case for consoles for these
drivers, as was pointed out by David Miller.

Now, this patch re-introduces the checks (at this point we check
port->state, not the tty proper, as we do not care about tty pointers
anymore). For both of the drivers, we place the check below the
handling of break signal so that sysrq can actually work. (One needs
to issue a break and then sysrq key within the following 5 seconds.)

We do not change sc26xx, sunhv, and sunsu here because they behave the
same as before.  People having that hardware should fix the driver
eventually, however. They always could unconditionally dereference tty
in receive_chars, port->state in uart_handle_dcd_change, and
up->port.state->port.tty.

There is perhaps more to fix in all those drivers, but they are at
least in a state they were before.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix recursive deadlock in tty_perform_flush()

tty_perform_flush() can deadlock when called while holding
a line discipline reference. By definition, all ldisc drivers
hold a ldisc reference, so calls originating from ldisc drivers
must not block for a ldisc reference.

The deadlock can occur when:
  CPU 0                    |  CPU 1
                           |
tty_ldisc_ref(tty)         |
....                       | <line discipline halted>
tty_ldisc_ref_wait(tty)    |
                           |

CPU 0 cannot progess because it cannot obtain an ldisc reference
with the line discipline has been halted (thus no new references
are granted).
CPU 1 cannot progress because an outstanding ldisc reference
has not been released.

An in-tree call-tree audit of tty_perform_flush() [1] shows 5
ldisc drivers calling tty_perform_flush() indirectly via
n_tty_ioctl_helper() and 2 ldisc drivers calling directly.
A single tty driver safely uses the function.

[1]
Recursive usage:

/* These functions are line discipline ioctls and thus
 * recursive wrt line discipline references */

tty_perform_flush() - ./drivers/tty/tty_ioctl.c
    n_tty_ioctl_helper()
        hci_uart_tty_ioctl(default) - drivers/bluetooth/hci_ldisc.c (N_HCI)
        n_hdlc_tty_ioctl(default) - drivers/tty/n_hdlc.c (N_HDLC)
        gsmld_ioctl(default) - drivers/tty/n_gsm.c (N_GSM0710)
        n_tty_ioctl(default) - drivers/tty/n_tty.c (N_TTY)
        gigaset_tty_ioctl(default) - drivers/isdn/gigaset/ser-gigaset.c (N_GIGASET_M101)
    ppp_synctty_ioctl(TCFLSH) - drivers/net/ppp/pps_synctty.c
    ppp_asynctty_ioctl(TCFLSH) - drivers/net/ppp/ppp_async.c

Non-recursive use:

tty_perform_flush() - drivers/tty/tty_ioctl.c
    ipw_ioctl(TCFLSH) - drivers/tty/ipwireless/tty.c
       /* This function is a tty i/o ioctl method, which
        * is invoked by tty_ioctl() */

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Remove redundant tty_wait_until_sent()

tty_ioctl() already waits until sent.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Locate get/put ldisc functions together

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fold one-line assign function into callers

Now that tty_ldisc_assign() is a one-line file-scoped function,
remove it and perform the simple assignment at its call sites.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Document unsafe ldisc reference acquire

Merge get_ldisc() into its only call site.
Note how, after merging, the unsafe acquire of an ldisc reference
is obvious.

   CPU 0 in tty_ldisc_try()         |  CPU 1 in tty_ldisc_halt()
                                    |
test_bit(TTY_LDISC, &tty_flags)     |
if (true)                           |  clear_bit(TTY_LDISC, &tty_flags)
  tty->ldisc != 0?                  |  atomic_read(&tty->ldisc->users)
  if (true)                         |  ret_val == 1?
    atomic_inc(&tty->ldisc->users)  |  if (false)
                                    |    wait
                                    |
<goes on assuming safe ldisc use>   |  <doesn't wait - proceeds w/ close>
                                    |

The spin lock in tty_ldisc_try() does nothing wrt synchronizing
the ldisc halt since it's not acquired as part of halting.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Separate release semantics of ldisc reference

tty_ldisc_ref()/tty_ldisc_unref() have usage semantics
equivalent to down_read_trylock()/up_read(). Only
callers of tty_ldisc_put() are performing the additional
operations necessary for proper ldisc teardown, and then only
after ensuring no outstanding 'read lock' remains.

Thus, tty_ldisc_unref() should never be the last reference;
WARN if it is. Conversely, tty_ldisc_put() should never be
destructing if the use count != 1.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Don't protect atomic operation with mutex

test_bit() is already atomic; drop mutex lock/unlock.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Add ldisc hangup debug messages

Expected typical debug log:
[  582.721965] tty_open: opening pts3...
[  582.721970] tty_open: opening pts3...
[  582.721977] tty_release: pts3 (tty count=3)...
[  582.721980] tty_release: ptm3 (tty count=1)...
[  582.722015] pts3 vhangup...
[  582.722020] tty_ldisc_hangup: pts3: closing ldisc: ffff88007a920540
[  582.724128] tty_release: pts3 (tty count=2)...
[  582.724217] tty_ldisc_hangup: pts3: re-opened ldisc: ffff88007a920580
[  582.724221] tty_release: ptm3: final close
[  582.724234] tty_ldisc_release: ptm3: closing ldisc: ffff88007a920a80
[  582.724238] tty_ldisc_release: ptm3: ldisc closed
[  582.724241] tty_release: ptm3: freeing structure...
[  582.724741] tty_open: opening pts3...

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Bracket ldisc release with TTY_DEBUG_HANGUP messages

Expected typical log output:
[    2.437211] tty_open: opening pts1...
[    2.443376] tty_open: opening pts5...
[    2.447830] tty_release: ptm0 (tty count=1)...
[    2.447849] pts0 vhangup...
[    2.447865] tty_release: ptm0: final close
[    2.447876] tty_release: ptm0: freeing structure...
[    2.451634] tty_release: tty1 (tty count=1)...
[    2.451638] tty_release: tty1: final close
[    2.451654] tty_release: tty1: freeing structure...
[    2.452505] tty_release: pts5 (tty count=2)...
[    2.453029] tty_open: opening pts0...

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix 'deferred reopen' ldisc comment

This comment is a victim of code migration from
"tty: Fix the ldisc hangup race"; re-parent it.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Make core responsible for synchronizing its work

The tty core relies on the ldisc layer for synchronizing destruction
of the tty. Instead, the final tty release must wait for any pending tty
work to complete prior to tty destruction.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Complete ownership transfer of flip buffers

Waiting for buffer work to complete is not required for safely
performing changes to the line discipline, once the line discipline
is halted. The buffer work routine, flush_to_ldisc(), will be
unable to acquire an ldisc ref and all existing references were
waited until released (so it can't already have one).

Ensure running buffer work which may reference the soon-to-be-gone
tty completes and any buffer work running after this point retrieves
a NULL tty.

Also, ensure all buffer work is cancelled on port destruction.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Don't reenable already enabled ldisc

tty_ldisc_hangup() guarantees the ldisc is enabled (or that there
is no ldisc). Since __tty_hangup() was the only user, re-define
tty_ldisc_enable() in file-scope.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fully initialize ldisc before restarting buffer work

Buffer work may already be pending when the n_tty ldisc is re-opened,
eg., when setting the ldisc (via TIOCSETD ioctl) and when hanging up
the tty. Since n_tty_set_room() may restart buffer work, first ensure
the ldisc is completely initialized.

Factor n_tty_set_room() out of reset_buffer_flags() (only 2 callers)
and reorganize n_tty_open() to set termios last; buffer work will
be restarted there if necessary, after the char_map is properly
initialized.

Fixes this WARNING:

[  549.561769] ------------[ cut here ]------------
[  549.598755] WARNING: at drivers/tty/n_tty.c:160 n_tty_set_room+0xff/0x130()
[  549.604058] scheduling buffer work for halted ldisc
[  549.607741] Pid: 9417, comm: trinity-child28 Tainted: G      D W 3.7.0-next-20121217-sasha-00023-g8689ef9 #219
[  549.652580] Call Trace:
[  549.662754]  [<ffffffff81c432cf>] ? n_tty_set_room+0xff/0x130
[  549.665458]  [<ffffffff8110cae7>] warn_slowpath_common+0x87/0xb0
[  549.668257]  [<ffffffff8110cb71>] warn_slowpath_fmt+0x41/0x50
[  549.671007]  [<ffffffff81c432cf>] n_tty_set_room+0xff/0x130
[  549.673268]  [<ffffffff81c44597>] reset_buffer_flags+0x137/0x150
[  549.675607]  [<ffffffff81c45b71>] n_tty_open+0x131/0x1c0
[  549.677699]  [<ffffffff81c47824>] tty_ldisc_open.isra.5+0x54/0x70
[  549.680147]  [<ffffffff81c482bf>] tty_ldisc_hangup+0x11f/0x1e0
[  549.682409]  [<ffffffff81c3fa17>] __tty_hangup+0x137/0x440
[  549.684634]  [<ffffffff81c3fd49>] tty_vhangup+0x9/0x10
[  549.686443]  [<ffffffff81c4a42c>] pty_close+0x14c/0x160
[  549.688446]  [<ffffffff81c41225>] tty_release+0xd5/0x490
[  549.690460]  [<ffffffff8127d8a2>] __fput+0x122/0x250
[  549.692577]  [<ffffffff8127d9d9>] ____fput+0x9/0x10
[  549.694534]  [<ffffffff811348c2>] task_work_run+0xb2/0xf0
[  549.696349]  [<ffffffff81113c6d>] do_exit+0x36d/0x580
[  549.698286]  [<ffffffff8107d964>] ? syscall_trace_enter+0x24/0x2e0
[  549.702729]  [<ffffffff81113f4a>] do_group_exit+0x8a/0xc0
[  549.706775]  [<ffffffff81113f92>] sys_exit_group+0x12/0x20
[  549.711088]  [<ffffffff83cfab18>] tracesys+0xe1/0xe6
[  549.728001] ---[ end trace 73eb41728f11f87e ]---

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Correct unthrottle-with-buffer-flush comments

The driver is no longer unthrottled on buffer reset, so remove
comments that claim it is.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Wait for SAK work before waiting for hangup work

SAK work may schedule hangup work (if TTY_SOFT_SAK is defined), thus
SAK work must be flushed before hangup work.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Halt both ldiscs concurrently

The pty driver does not obtain an ldisc reference to the linked
tty when writing. When the ldiscs are sequentially halted, it
is possible for one ldisc to be halted, and before the second
ldisc can be halted, a concurrent write schedules buffer work on
the first ldisc. This can lead to an access-after-free error when
the scheduled buffer work starts on the closed ldisc.

Prevent subsequent use after halt by performing each stage
of the halt on both ttys.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Strengthen no-subsequent-use guarantee of tty_ldisc_halt()

In preparation for destructing and freeing the tty, the line discipline
must first be brought to an inactive state before it can be destructed.
This line discipline shutdown must:
 - disallow new users of the ldisc
 - wait for existing ldisc users to finish
 - only then, cancel/flush their pending/running work

Factor tty_ldisc_wait_idle() from tty_set_ldisc() and tty_ldisc_kill()
to ensure this shutdown order.

Failure to provide this guarantee can result in scheduled work
running after the tty has already been freed, as indicated in the
following log message:

[   88.331234] WARNING: at drivers/tty/tty_buffer.c:435 flush_to_ldisc+0x194/0x1d0()
[   88.334505] Hardware name: Bochs
[   88.335618] tty is bad=-1
[   88.335703] Modules linked in: netconsole configfs bnep rfcomm bluetooth ......
[   88.345272] Pid: 39, comm: kworker/1:1 Tainted: G        W    3.7.0-next-20121129+ttydebug-xeon #20121129+ttydebug
[   88.347736] Call Trace:
[   88.349024]  [<ffffffff81058aff>] warn_slowpath_common+0x7f/0xc0
[   88.350383]  [<ffffffff81058bf6>] warn_slowpath_fmt+0x46/0x50
[   88.351745]  [<ffffffff81432bd4>] flush_to_ldisc+0x194/0x1d0
[   88.353047]  [<ffffffff816f7fe1>] ? _raw_spin_unlock_irq+0x21/0x50
[   88.354190]  [<ffffffff8108a809>] ? finish_task_switch+0x49/0xe0
[   88.355436]  [<ffffffff81077ad1>] process_one_work+0x121/0x490
[   88.357674]  [<ffffffff81432a40>] ? __tty_buffer_flush+0x90/0x90
[   88.358954]  [<ffffffff81078c84>] worker_thread+0x164/0x3e0
[   88.360247]  [<ffffffff81078b20>] ? manage_workers+0x120/0x120
[   88.361282]  [<ffffffff8107e230>] kthread+0xc0/0xd0
[   88.362284]  [<ffffffff816f0000>] ? cmos_do_probe+0x2eb/0x3bf
[   88.363391]  [<ffffffff8107e170>] ? flush_kthread_worker+0xb0/0xb0
[   88.364797]  [<ffffffff816fff6c>] ret_from_fork+0x7c/0xb0
[   88.366087]  [<ffffffff8107e170>] ? flush_kthread_worker+0xb0/0xb0
[   88.367266] ---[ end trace 453a7c9f38fbfec0 ]---

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Relocate tty_ldisc_halt() to avoid forward declaration

tty_ldisc_halt() will use the file-scoped function, tty_ldisc_wait_idle(),
in the following patch.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix ldisc halt sequence on hangup

Flip buffer work cannot be cancelled until all outstanding ldisc
references have been released. Convert the ldisc ref wait into
a full ldisc halt with buffer work cancellation.

Note that the legacy mutex is not held while cancelling.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Remove unnecessary re-test of ldisc ref count

Since the tty->ldisc is prevented from being changed by tty_set_ldisc()
when a tty is being hung up, re-testing the ldisc user count is
unnecessary -- ie, it cannot be a different ldisc and the user count
cannot have increased (assuming the caller meets the precondition that
TTY_LDISC flag is cleared)

Removal of the 'early-out' locking optimization is necessary for
the subsequent patch 'tty: Fix ldisc halt sequence on hangup'.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Refactor wait for ldisc refs out of tty_ldisc_hangup()

Refactor tty_ldisc_hangup() to extract standalone function,
tty_ldisc_hangup_wait_idle(), to wait for ldisc references
to be released.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Don't flush buffer when closing ldisc

A buffer flush is both undesirable and unnecessary when the ldisc
is closing. A buffer flush performs the following:
 1. resets ldisc data fields to their initial state
 2. resets tty->receive_room to indicate more data can be sent
 3. schedules buffer work to receive more data
 4. signals a buffer flush has happened to linked pty in packet mode

Since the ldisc has been halted and the tty may soon be destructed,
buffer work must not be scheduled as that work might access
an invalid tty and ldisc state. Also, the ldisc read buffer is about
to be freed, so that's pointless.

Resetting the ldisc data fields is pointless as well since that
structure is about to be freed.

Resetting tty->receive_room is unnecessary, as it will be properly
reset if a new ldisc is reopened. Besides, resetting the original
receive_room value would be wrong since the read buffer will be
gone.

Since the packet mode flush is observable from userspace, this
behavior has been preserved.

The test jig originally authored by Ilya Zykov <ilya@ilyx.ru> and
signed off by him is included below. The test jig prompts the
following warnings which this patch fixes.

[   38.051111] ------------[ cut here ]------------
[   38.052113] WARNING: at drivers/tty/n_tty.c:160 n_tty_set_room.part.6+0x8b/0xa0()
[   38.053916] Hardware name: Bochs
[   38.054819] Modules linked in: netconsole configfs bnep rfcomm bluetooth parport_pc ppdev snd_hda_intel snd_hda_codec
snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse snd_timer serio_raw mac_hid snd_seq_device
snd microcode lp parport virtio_balloon soundcore i2c_piix4 snd_page_alloc floppy 8139too 8139cp
[   38.059704] Pid: 1564, comm: pty_kill Tainted: G        W    3.7.0-next-20121130+ttydebug-xeon #20121130+ttydebug
[   38.061578] Call Trace:
[   38.062491]  [<ffffffff81058b4f>] warn_slowpath_common+0x7f/0xc0
[   38.063448]  [<ffffffff81058baa>] warn_slowpath_null+0x1a/0x20
[   38.064439]  [<ffffffff8142dc2b>] n_tty_set_room.part.6+0x8b/0xa0
[   38.065381]  [<ffffffff8142dc82>] n_tty_set_room+0x42/0x80
[   38.066323]  [<ffffffff8142e6f2>] reset_buffer_flags+0x102/0x160
[   38.077508]  [<ffffffff8142e76d>] n_tty_flush_buffer+0x1d/0x90
[   38.078782]  [<ffffffff81046569>] ? default_spin_lock_flags+0x9/0x10
[   38.079734]  [<ffffffff8142e804>] n_tty_close+0x24/0x60
[   38.080730]  [<ffffffff81431b61>] tty_ldisc_close.isra.2+0x41/0x60
[   38.081680]  [<ffffffff81431bbb>] tty_ldisc_kill+0x3b/0x80
[   38.082618]  [<ffffffff81432a07>] tty_ldisc_release+0x77/0xe0
[   38.083549]  [<ffffffff8142b781>] tty_release+0x451/0x4d0
[   38.084525]  [<ffffffff811950be>] __fput+0xae/0x230
[   38.085472]  [<ffffffff8119524e>] ____fput+0xe/0x10
[   38.086401]  [<ffffffff8107aa88>] task_work_run+0xc8/0xf0
[   38.087334]  [<ffffffff8105ea56>] do_exit+0x196/0x4b0
[   38.088304]  [<ffffffff8106c77b>] ? __dequeue_signal+0x6b/0xb0
[   38.089240]  [<ffffffff8105ef34>] do_group_exit+0x44/0xa0
[   38.090182]  [<ffffffff8106f43d>] get_signal_to_deliver+0x20d/0x4e0
[   38.091125]  [<ffffffff81016979>] do_signal+0x29/0x130
[   38.092096]  [<ffffffff81431a9e>] ? tty_ldisc_deref+0xe/0x10
[   38.093030]  [<ffffffff8142a317>] ? tty_write+0xb7/0xf0
[   38.093976]  [<ffffffff81193f53>] ? vfs_write+0xb3/0x180
[   38.094904]  [<ffffffff81016b20>] do_notify_resume+0x80/0xc0
[   38.095830]  [<ffffffff81700492>] int_signal+0x12/0x17
[   38.096788] ---[ end trace 5f6f7a9651cd999b ]---

[ 2730.570602] ------------[ cut here ]------------
[ 2730.572130] WARNING: at drivers/tty/n_tty.c:160 n_tty_set_room+0x107/0x140()
[ 2730.574904] scheduling buffer work for halted ldisc
[ 2730.578303] Pid: 9691, comm: trinity-child15 Tainted: G        W 3.7.0-rc8-next-20121205-sasha-00023-g59f0d85 #207
[ 2730.588694] Call Trace:
[ 2730.590486]  [<ffffffff81c41d77>] ? n_tty_set_room+0x107/0x140
[ 2730.592559]  [<ffffffff8110c827>] warn_slowpath_common+0x87/0xb0
[ 2730.595317]  [<ffffffff8110c8b1>] warn_slowpath_fmt+0x41/0x50
[ 2730.599186]  [<ffffffff81c41d77>] n_tty_set_room+0x107/0x140
[ 2730.603141]  [<ffffffff81c42fe7>] reset_buffer_flags+0x137/0x150
[ 2730.607166]  [<ffffffff81c43018>] n_tty_flush_buffer+0x18/0x90
[ 2730.610123]  [<ffffffff81c430af>] n_tty_close+0x1f/0x60
[ 2730.612068]  [<ffffffff81c461f2>] tty_ldisc_close.isra.4+0x52/0x60
[ 2730.614078]  [<ffffffff81c462ab>] tty_ldisc_reinit+0x3b/0x70
[ 2730.615891]  [<ffffffff81c46db2>] tty_ldisc_hangup+0x102/0x1e0
[ 2730.617780]  [<ffffffff81c3e537>] __tty_hangup+0x137/0x440
[ 2730.619547]  [<ffffffff81c3e869>] tty_vhangup+0x9/0x10
[ 2730.621266]  [<ffffffff81c48f1c>] pty_close+0x14c/0x160
[ 2730.622952]  [<ffffffff81c3fd45>] tty_release+0xd5/0x490
[ 2730.624674]  [<ffffffff8127fbe2>] __fput+0x122/0x250
[ 2730.626195]  [<ffffffff8127fd19>] ____fput+0x9/0x10
[ 2730.627758]  [<ffffffff81134602>] task_work_run+0xb2/0xf0
[ 2730.629491]  [<ffffffff811139ad>] do_exit+0x36d/0x580
[ 2730.631159]  [<ffffffff81113c8a>] do_group_exit+0x8a/0xc0
[ 2730.632819]  [<ffffffff81127351>] get_signal_to_deliver+0x501/0x5b0
[ 2730.634758]  [<ffffffff8106de34>] do_signal+0x24/0x100
[ 2730.636412]  [<ffffffff81204865>] ? user_exit+0xa5/0xd0
[ 2730.638078]  [<ffffffff81183cd8>] ? trace_hardirqs_on_caller+0x118/0x140
[ 2730.640279]  [<ffffffff81183d0d>] ? trace_hardirqs_on+0xd/0x10
[ 2730.642164]  [<ffffffff8106df78>] do_notify_resume+0x48/0xa0
[ 2730.643966]  [<ffffffff83cdff6a>] int_signal+0x12/0x17
[ 2730.645672] ---[ end trace a40d53149c07fce0 ]---

/*
 * pty_thrash.c
 *
 * Based on original test jig by Ilya Zykov <ilya@ilyx.ru>
 *
 * Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
 * Signed-off-by: Ilya Zykov <ilya@ilyx.ru>
 */

static int fd;

static void error_exit(char *f, ...)
{
        va_list va;

        va_start(va, f);
        vprintf(f, va);
        printf(": %s\n", strerror(errno));
        va_end(va);

        if (fd >= 0)
                close(fd);

        exit(EXIT_FAILURE);
}

int main(int argc, char *argv[]) {
        int parent;
        char pts_name[24];
        int ptn, unlock;

        while (1) {

                fd = open("/dev/ptmx", O_RDWR);
                if (fd < 0)
                        error_exit("opening pty master");
                unlock = 0;
                if (ioctl(fd, TIOCSPTLCK, &unlock) < 0)
                        error_exit("unlocking pty pair");
                if (ioctl(fd, TIOCGPTN, &ptn) < 0)
                        error_exit("getting pty #");
                snprintf(pts_name, sizeof(pts_name), "/dev/pts/%d", ptn);

                child_id = fork();
                if (child_id == -1)
                        error_exit("forking child");

                if (parent) {
                        int err, id, status;
                        char buf[128];
                        int n;

                        n = read(fd, buf, sizeof(buf));
                        if (n < 0)
                                error_exit("master reading");
                        printf("%.*s\n", n-1, buf);

                        close(fd);

                        err = kill(child_id, SIGKILL);
                        if (err < 0)
                                error_exit("killing child");
                        id = waitpid(child_id, &status, 0);
                        if (id < 0 || id != child_id)
                                error_exit("waiting for child");

                } else { /* Child */

                        close(fd);
                        printf("Test cycle on slave pty %s\n", pts_name);
                        fd = open(pts_name, O_RDWR);
                        if (fd < 0)
                                error_exit("opening pty slave");

                        while (1) {
                                char pattern[] = "test\n";
                                if (write(fd, pattern, strlen(pattern)) < 0)
                                        error_exit("slave writing");
                        }

                }
        }

        /* never gets here */
        return 0;
}

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Factor packet mode status change for reuse

Factor the packet mode status change from n_tty_flush_buffer
for use by follow-on patch.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Add diagnostic for halted line discipline

Flip buffer work must not be scheduled by the line discipline
after the line discipline has been halted; issue warning.

Note: drivers can still schedule flip buffer work.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: ifx6x60: Remove unused suspend/resume callbacks

The ifx6x60 driver implements both legacy suspend/resume callbacks and
dev_pm_ops. The SPI core is going to ignore legacy suspend/resume
callbacks if a driver implements dev_pm_ops. Since the legacy suspend/resume
callbacks are empty in this case it is safe to just remove them.

Cc: Bi Chao <chao.bi@intel.com>
Cc: Chen Jun <jun.d.chen@intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: mrst_max3110: Use dev_pm_ops

Use dev_pm_ops instead of the deprecated legacy suspend/resume for the
mrst_max3110 driver.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: max310x: Use dev_pm_ops

Use dev_pm_ops instead of the deprecated legacy suspend/resume for the
max310x driver.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: max3100: Use dev_pm_ops

Use dev_pm_ops instead of the deprecated legacy suspend/resume for the
max3100 driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: fix close of uninitialised ports

Make sure we do not make tty-driver callbacks or wait for port to drain
on uninitialised ports (e.g. when open failed) in
tty_port_close_start().

No callback, such as flush_buffer or wait_until_sent, needs to be made
on a port that has never been opened. Neither does it make much sense to
add drain delay for an uninitialised port.

Currently a drain delay of up to two seconds could be added when a tty
fails to open.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: clean up port drain-delay handling

Move port drain-delay handling to a separate function.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: fix DTR not being dropped on hang up

Move HUPCL handling to port shutdown so that DTR is dropped also on hang
up (tty_port_close is a noop for hung-up ports).

Also do not try to drop DTR for uninitialised ports where it has never
been raised (e.g. after a failed open).

Note that this is also the current behaviour of serial-core.

Nine drivers currently call tty_port_close_start directly (rather than
through tty_port_close) and seven of them lower DTR as part of their
close (if the port has been initialised). Fixup the remaining two
drivers so that it continues to be lowered also on normal (non-HUP)
close. [ Note that most of those other seven drivers did not expect DTR
to have been dropped by tty_port_close_start in the first place. ]

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: fix DTR being raised on hang up

Make sure to check ASYNC_INITIALISED before raising DTR when waking up
from blocked open in tty_port_block_til_ready.

Currently DTR could get raised at hang up as a blocked process would
raise DTR unconditionally before checking for hang up and returning.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: wake up processes last at hangup

Move wake up of processes on blocked-open and modem-status wait queues
to after port shutdown at hangup.

This way the woken up processes can use the ASYNC_INITIALIZED flag to
detect port shutdown.

Note that this is the order currently used by serial-core.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: clean up port shutdown

Untangle port-shutdown logic and make sure the initialised flag is
always cleared for non-console ports.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crisv10: use counts from tty_port

The same as flags, convert to using open/close counts from tty_port.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crisv10: use *_wait from tty_port

The same as flags, convert to using *_wait queues from tty_port.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crisv10: use close delays from tty_port

The same as flags, convert to using close delays from tty_port.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crisv10: remove unused members

Well, all those are unused. They were perhaps copied from generic
serial structure ages ago. Remove them for good.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crisv10: stop returning info from handle_ser_rx_interrupt

The return value is not used anywhere, so no need to return anything.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crisv10: use flags from tty_port

First, remove STD_FLAGS as the value, or its subvalues
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) is not tested anywhere --
there is no point to initialize flags to that. Second, use flags
member from tty_port when we have it now. So that we do not waste
space.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: cleanup tty->hw_stopped uses

tty->hw_stopped is set only by drivers to remember HW state. If it is
never set to 1 in a particular driver, there is no need to check it in
the driver at all. Remove such checks.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: serial/msm_serial_hs, remove unused tty

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: serial/bfin_uart, unbreak build with KGDB enabled

There are no (and never were any) kgdb fields in uart_ops. Setting
them produces a build error:
drivers/tty/serial/bfin_uart.c:1054:2: error: unknown field 'kgdboc_port_startup' specified in initializer
drivers/tty/serial/bfin_uart.c:1054:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/tty/serial/bfin_uart.c:1054:2: warning: (near initialization for 'bfin_serial_pops.ioctl') [enabled by default]
drivers/tty/serial/bfin_uart.c:1055:2: error: unknown field 'kgdboc_port_shutdown' specified in initializer
drivers/tty/serial/bfin_uart.c:1055:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/tty/serial/bfin_uart.c:1055:2: warning: (near initialization for 'bfin_serial_pops.poll_init') [enabled by default]

Remove them.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: add tty_port_tty_hangup helper

It allows for cleaning up on a considerable amount of places. They did
port_get, hangup, kref_put. Now the only thing needed is to call
tty_port_tty_hangup which does exactly that. And they can also decide
whether to consider CLOCAL or completely ignore that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: quatech2, remove unneeded is_open

tty->ops->break_ctl cannot be called outside the gap between open and
close. So there is no need to check whether the port is open in
break_ctl in quatech2. Remove the check and also that member
completely.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: add tty_port_tty_wakeup helper

It allows for cleaning up on a considerable amount of places. They did
port_get, wakeup, kref_put. Now the only thing needed is to call
tty_port_tty_wakeup which does exactly that.

One exception is ifx6x60 where tty_wakeup was open-coded. We now call
tty_wakeup properly there.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: msm_smd_tty, clean up activate/shutdown

Do not dig struct smd_tty_info out of tty_struct using
tty_port_tty_get. It is unnecessarily too complicated, use simple
container_of instead.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: do not warn about setting speed via SPD_*

The warning is there since 2.1.69 and we have not seen anybody
reporting it in the past decade. Remove the warning now.

tty_get_baud_rate can now be inline. This gives us one less
EXPORT_SYMBOL.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: synclink, remove superfluous check

info is obtained by container_of. It can never be NULL. So do not test
that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: jsm, remove superfluous check

data_len in jsm_input cannot be zero as we would jump out early in the
function. It also cannot be negative because it is an int and we do
bitwise and with 8192. So remove the check.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix checkpatch errors in tty_ldisc.h

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Lock access to tty->pgrp for POSIX job control

Concurrent access to tty->pgrp must be protected with tty->ctrl_lock.
Also, as noted in the comments, reading current->signal->tty is
safe because either,
  1) current->signal->tty is assigned by current, or
  2) current->signal->tty is set to NULL.

NB: for reference, tty_check_change() implements a similar POSIX
check for the ioctls corresponding to tcflush(), tcdrain(),
tcsetattr(), tcsetpgrp(), tcflow() and tcsendbreak().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fix unsafe driver-side signals

An ldisc reference is insufficient guarantee the foreground process
group is not in the process of being signalled from a hangup.

1) Reads of tty->pgrp must be locked with ctrl_lock
2) The group pid must be referenced for the duration of signalling.
   Because the driver-side is not process-context, a pid reference
   must be acquired.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Fix stuck throttled driver

As noted in the following comment:

  /* FIXME: there is a tiny race here if the receive room check runs
     before the other work executes and empties the buffer (upping
     the receiving room and unthrottling. We then throttle and get
     stuck. This has been observed and traced down by Vincent Pillet/
     We need to address this when we sort out out the rx path locking */

Use new safe throttle/unthrottle functions to re-evaluate conditions
if interrupted by the complement flow control function.

Reported-by: Vincent Pillet <vincentx.pillet@intel.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Add safe tty throttle/unthrottle functions

The tty driver can become stuck throttled due to race conditions
between throttle and unthrottle, when the decision to throttle
or unthrottle is conditional. The following example helps to
illustrate the race:

  CPU 0                        |  CPU 1
                               |
if (condition A)               |
                               | <processing such that A not true>
                               | if (!condition A)
                               |     unthrottle()
    throttle()                 |
                               |

Note the converse is also possible; ie.,

  CPU 0                        |  CPU 1
                               |
                               | if (!condition A)
<processing such that A true>  |
if (condition A)               |
    throttle()                 |
                               |     unthrottle()
                               |

Add new throttle/unthrottle functions based on the familiar model
of task state and schedule/wake. For example,

    while (1) {
        tty_set_flow_change(tty, TTY_THROTTLE_SAFE);
        if (!condition)
            break;
        if (!tty_throttle_safe(tty))
            break;
    }
    __tty_set_flow_change(tty, 0);

In this example, if an unthrottle occurs after the condition is
evaluated but before tty_throttle_safe(), then tty_throttle_safe()
will return non-zero, looping and forcing the re-evaluation of
condition.

Reported-by: Vincent Pillet <vincentx.pillet@intel.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: Inline check_unthrottle() at lone call site

2-line function check_unthrottle() is now only called from
n_tty_read(); merge into caller.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.9-rc3

perf,x86: fix link failure for non-Intel configs

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

arch/x86/power/built-in.o: In function `restore_processor_state':
(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

perf,x86: fix wrmsr_on_cpu() warning on suspend/resume

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.

Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "Eric's rcu barrier patch fixes a long standing problem with our
  unmount code hanging on to devices in workqueue helpers.  Liu Bo
  nailed down a difficult assertion for in-memory extent mappings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix warning of free_extent_map
  Btrfs: fix warning when creating snapshots
  Btrfs: return as soon as possible when edquot happens
  Btrfs: return EIO if we have extent tree corruption
  btrfs: use rcu_barrier() to wait for bdev puts at unmount
  Btrfs: remove btrfs_try_spin_lock
  Btrfs: get better concurrency for snapshot-aware defrag work

Btrfs: fix warning of free_extent_map

Users report that an extent map's list is still linked when it's actually
going to be freed from cache.

The story is that

a) when we're going to drop an extent map and may split this large one into
smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means
that it's on the list to be logged, then the smaller ems split from it will also
be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected.

b) we'll keep ems from unlinking the list and freeing when they are flagged with
EXTENT_FLAG_LOGGING, because the log code holds one reference.

The end result is the warning, but the truth is that we set the flag
EXTENT_FLAG_LOGGING only during fsync.

So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one.

Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fix from Michal Marek:
 "One fix for for make headers_install/headers_check to not require make
  3.81.  The requirement has been accidentally introduced in 3.7."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: fix make headers_check with make 3.80

Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux

Pull OpenRISC bug fixes from Jonas Bonn:

 - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits
   for OpenRISC were.  We now require GPIOLIB as this is the preferred
   way forward.

 - The system.h split introduced a bug in llist.h for arches using
   asm-generic/cmpxchg.h directly, which is currently only OpenRISC.
   The patch here moves two defines from asm-generic/atomic.h to
   asm-generic/cmpxchg.h to make things work as they should.

 - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does
   not have the virt_to_bus methods, so there's a patch to remove it
   again.

* tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux:
  openrisc: remove HAVE_VIRT_TO_BUS
  asm-generic: move cmpxchg*_local defs to cmpxchg.h
  openrisc: require gpiolib

Merge tag 'char-misc-3.9-rc2' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg Kroah-Hartman:
 "Here are some tiny fixes for the w1 drivers and the final removal
  patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now
  gone from your tree, this just drops the Kconfig item itself.)

  All have been in the linux-next tree for a while"

* tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  final removal of CONFIG_EXPERIMENTAL
  w1: fix oops when w1_search is called from netlink connector
  w1-gpio: fix unused variable warning
  w1-gpio: remove erroneous __exit and __exit_p()
  ARM: w1-gpio: fix erroneous gpio requests

Merge tag 'sound-3.9' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes, as expected for the middle rc:
   - A couple of fixes for potential NULL dereferences and out-of-range
     array accesses revealed by static code parsers
   - A fix for the wrong error handling detected by trinity
   - A regression fix for missing audio on some MacBooks
   - CA0132 DSP loader fixes
   - Fix for EAPD control of IDT codecs on machines w/o speaker
   - Fix a regression in the HD-audio widget list parser code
   - Workaround for the NuForce UDH-100 USB audio"

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
  sound: sequencer: cap array index in seq_chn_common_event()
  ALSA: hda/ca0132 - Remove extra setting of dsp_state.
  ALSA: hda/ca0132 - Check download state of DSP.
  ALSA: hda/ca0132 - Check if dspload_image succeeded.
  ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
  ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
  ALSA: usb-audio: add a workaround for the NuForce UDH-100
  ALSA: asihpi - fix potential NULL pointer dereference
  ALSA: seq: Fix missing error handling in snd_seq_timer_open()

Merge branch 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull DMA-mapping fix from Marek Szyprowski:
 "An important fix for all ARM architectures which use ZONE_DMA.
  Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated
  buffers outsize DMA zone."

* 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation

Merge tag 'mfd-fixes-3.9-1' of git://git./linux/kernel/git/sameo/mfd-fixes

Pull MFD fixes from Samuel Ortiz:
 "This is the first batch of MFD fixes for 3.9.

  With this one we have:

   - An ab8500 build failure fix.
   - An ab8500 device tree parsing fix.
   - A fix for twl4030_madc remove routine to work properly (when
     built-in).
   - A fix for properly registering palmas interrupt handler.
   - A fix for omap-usb init routine to actually write into the
     hostconfig register.
   - A couple of warning fixes for ab8500-gpadc and tps65912"

* tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: twl4030-madc: Remove __exit_p annotation
  mfd: ab8500: Kill "reg" property from binding
  mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO
  mfd: wm831x: Don't forward declare enum wm831x_auxadc
  mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()
  mfd: tps65912: Declare and use tps65912_irq_exit()
  mfd: palmas: Provide irq flags through DT/platform data
  mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error
  mfd: omap-usb-host: Actually update hostconfig

Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Bug fixes for pmbus, ltc2978, and lineage-pem drivers

  Added specific maintainer for some hwmon drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/ltc2978) Fix temperature reporting
  hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
  hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
  MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers

sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix it.

Thanks the comments from Andrew and Randy.

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Signal SIGHUP before hanging up ldisc

An exiting session leader can hang if a foreground process is
blocking for line discipline i/o, eg. in n_tty_read(). This happens
because the blocking reader is holding an ldisc reference (indicating
the line discipline is in-use) which prevents __tty_hangup() from
recycling the line discipline. Although waiters are woken before
attempting to gain exclusive access for changing the ldisc, the
blocking reader in this case will not exit the i/o loop since it
has not yet received SIGHUP (because it has not been sent).

Instead, perform signalling first, then recycle the line discipline.

Fixes:

INFO: task init:1 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
init            D 00000000001d7180  2688     1      0 0x00000002
 ffff8800b9acfba8 0000000000000002 00000000001d7180 ffff8800b9b10048
 ffff8800b94cb000 ffff8800b9b10000 00000000001d7180 00000000001d7180
 ffff8800b9b10000 ffff8800b9acffd8 00000000001d7180 00000000001d7180
Call Trace:
 [<ffffffff83db9909>] __schedule+0x2e9/0x3b0
 [<ffffffff83db9b35>] schedule+0x55/0x60
 [<ffffffff83db74ba>] schedule_timeout+0x3a/0x370
 [<ffffffff81182349>] ? mark_held_locks+0xf9/0x130
 [<ffffffff83dbab38>] ? down_failed+0x108/0x200
 [<ffffffff83dbb7ab>] ? _raw_spin_unlock_irq+0x2b/0x80
 [<ffffffff81182608>] ? trace_hardirqs_on_caller+0x128/0x160
 [<ffffffff83dbab61>] down_failed+0x131/0x200
 [<ffffffff83dbbfad>] ? tty_ldisc_lock_pair_timeout+0xcd/0x120
 [<ffffffff83dbae03>] ldsem_down_write+0xd3/0x113
 [<ffffffff83dbbfad>] ? tty_ldisc_lock_pair_timeout+0xcd/0x120
 [<ffffffff8118264d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff83dbbfad>] tty_ldisc_lock_pair_timeout+0xcd/0x120
 [<ffffffff81c3df60>] tty_ldisc_hangup+0xd0/0x220
 [<ffffffff81c35bd7>] __tty_hangup+0x137/0x4f0
 [<ffffffff81c37c7c>] disassociate_ctty+0x6c/0x230
 [<ffffffff8111290c>] do_exit+0x41c/0x590
 [<ffffffff8107ad34>] ? syscall_trace_enter+0x24/0x2e0
 [<ffffffff81112b4a>] do_group_exit+0x8a/0xc0
 [<ffffffff81112b92>] sys_exit_group+0x12/0x20
 [<ffffffff83dc49d8>] tracesys+0xe1/0xe6
1 lock held by init/1:
 #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff83dbbfad>] tty_ldisc_lock_pair_timeout+0xcd/0x120

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Signal foreground group processes in hangup

When the session leader is exiting, signal the foreground group
processes as part of the hangup sequence, instead of after the
hangup is complete. This prepares for hanging up the
line discipline _after_ signalling processes which
may be blocking on ldisc i/o.

Parameterize __tty_hangup() to distinguish between when the
session leader is exiting and all other hangups; signal the
foreground group after signalling the session leader and its
process group, which preserves the original signal order.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Use spin_lock() inside existing critical region

The interrupt state does not need to be saved, disabled and
restored here; interrupts are already off because this lock
is bracketed by spin_lock_irq/spin_unlock_irq.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Fix spinlock flavor in non-atomic __tty_hangup()

__tty_hangup() and tty_vhangup() cannot be called from atomic context,
so locks do not need to preserve the interrupt state (although,
still disable interrupts).

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Refactor session leader SIGHUP from __tty_hangup()

Reduce complexity of __tty_hangup(); separate SIGHUP signalling
into tty_signal_session_leader().

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: ipwireless: Remove redundant NULL check before kfree

kfree on NULL pointer is a no-op.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: pch_uart: add console poll support

Implement console poll for pch_uart, this could enable KGDBoC when
on pch-uart console.

Signed-off-by: Liang Li <liang.li@windriver.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: amiserial, use module_platform_driver_probe()

This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: vt8500_serial: Convert to devm_ioremap_resource()

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: tegra: Convert to devm_ioremap_resource()

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pty: Remove redundant itty reset

port->itty has already been reset by release_tty() before
pty_cleanup() is called.

Call stack:
release_tty()
  tty_kref_put()
    queue_release_one_tty()
      release_one_tty() : workqueue
        tty->ops->cleanup()
          pty_cleanup()

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf,x86: fix kernel crash with PEBS/BTS after suspend/resume

This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.

The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs

During the transition to the generic parser, the hook to the codec
specific automute function was forgotten.  This resulted in the silent
output on some MacBooks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound: sequencer: cap array index in seq_chn_common_event()

"chn" here is a number between 0 and 255, but ->chn_info[] only has
16 elements so there is a potential write beyond the end of the
array.

If the seq_mode isn't SEQ_2 then we let the individual drivers
(either opl3.c or midi_synth.c) handle it.  Those functions all
do a bounds check on "chn" so I haven't changed anything here.
The opl3.c driver has up to 18 channels and not 16.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

mfd: twl4030-madc: Remove __exit_p annotation

4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation
on the twl4030_madc_remove function, but left an __exit_p() present on the
pointer to this function. Using __exit_p was as wrong with the devexit in
place as it is now, but now we get a gcc warning about an unused function.

In order for the twl4030_madc_remove to work correctly in built-in code, we
have to remove the __exit_p.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

ALSA: hda/ca0132 - Remove extra setting of dsp_state.

spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset
and check it in ca0132_download_dsp().

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/ca0132 - Check download state of DSP.

Instead of using the dspload_is_loaded() function, check the dsp_state
that is kept in the spec.  The dspload_is_loaded() function returns
true if the DSP transfer was never started.  This false-positive leads
to multiple second delays when ca0132_setup_efaults() times out on
each write.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/ca0132 - Check if dspload_image succeeded.

If dspload_image() fails, it was ignored and dspload_wait_loaded() was
still called.  dsp_loaded should never be set to true in this case,
skip it.  The check in dspload_wait_loaded() return true if the DSP is
loaded or if it never started.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

mm/fremap.c: fix possible oops on error path

The vm_flags introduced in 6d7825b10dbe ("mm/fremap.c: fix oops on error
path") is supposed to avoid a compiler warning about unitialized
vm_flags without changing the generated code.

However I am concerned that this is going to be very brittle, and fail
with some compiler versions. The failure could be either of:

- compiler could actually load vma->vm_flags before checking for the
  !vma condition, thus reintroducing the oops

- compiler could optimize out the !vma check, since the pointer just got
  dereferenced shortly before (so the compiler knows it can't be NULL!)

I propose reversing this part of the change and initializing vm_flags to 0
just to avoid the bogus uninitialized use warning.

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'rcu/urgent' of git://git./linux/kernel/git/paulmck/linux-rcu

Pull fix for hlist_entry_safe() regression from Paul McKenney:
 "This contains a single commit that fixes a regression in
  hlist_entry_safe().  This macro references its argument twice, which
  can cause NULL-pointer errors.  This commit applies a gcc statement
  expression, creating a temporary variable to avoid the double
  reference.  This has been posted to LKML at

    https://lkml.org/lkml/2013/3/9/75.

  Kudos to CAI Qian, whose testing uncovered this, to Eric Dumazet, who
  spotted root cause, and to Li Zefan, who tested this commit."

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  list: Fix double fetch of pointer in hlist_entry_safe()

list: Fix double fetch of pointer in hlist_entry_safe()

The current version of hlist_entry_safe() fetches the pointer twice,
once to test for NULL and the other to compute the offset back to the
enclosing structure.  This is OK for normal lock-based use because in
that case, the pointer cannot change.  However, when the pointer is
protected by RCU (as in "rcu_dereference(p)"), then the pointer can
change at any time.  This use case can result in the following sequence
of events:

1. CPU 0 invokes hlist_entry_safe(), fetches the RCU-protected
pointer as sees that it is non-NULL.

2. CPU 1 invokes hlist_del_rcu(), deleting the entry that CPU 0
just fetched a pointer to.  Because this is the last entry
in the list, the pointer fetched by CPU 0 is now NULL.

3. CPU 0 refetches the pointer, obtains NULL, and then gets a
NULL-pointer crash.

This commit therefore applies gcc's "({ })" statement expression to
create a temporary variable so that the specified pointer is fetched
only once, avoiding the above sequence of events.  Please note that
it is the caller's responsibility to use rcu_dereference() as needed.
This allows RCU-protected uses to work correctly without imposing
any additional overhead on the non-RCU case.

Many thanks to Eric Dumazet for spotting root cause!

Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Li Zefan <lizefan@huawei.com>

Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs

Pull ext2, ext3, reiserfs, quota fixes from Jan Kara:
 "A fix for regression in ext2, and a format string issue in ext3.  The
  rest isn't too serious."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix BUG_ON in evict() on inode deletion
  reiserfs: Use kstrdup instead of kmalloc/strcpy
  ext3: Fix format string issues
  quota: add missing use of dq_data_lock in __dquot_initialize

Btrfs: fix warning when creating snapshots

Creating snapshot passes extent_root to commit its transaction,
but it can lead to the warning of checking root for quota in
the __btrfs_end_transaction() when someone else is committing
the current transaction.  Since we've recorded the needed root
in trans_handle, just use it to get rid of the warning.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Btrfs: return as soon as possible when edquot happens

If one of qgroup fails to reserve firstly, we should return immediately,
it is unnecessary to continue check.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Btrfs: return EIO if we have extent tree corruption

The callers of lookup_inline_extent_info all handle getting an error back
properly, so return an error if we have corruption instead of being a jerk and
panicing.  Still WARN_ON() since this is kind of crucial and I've been seeing it
a bit too much recently for my taste, I think we're doing something wrong
somewhere.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>