pinctrl: freescale: imx: fix bogus check of of_iomap() return value

commit 9a4f424531dabd877259ae0071b8bcc4dede9eb5 upstream.

On error path of_iomap() returns NULL, hence IS_ERR() check is invalid
and may cause a NULL pointer dereference, the change fixes this
problem.

While we are here invert a device node check to simplify the code.

Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: nomadik: fix pull debug print inversion

commit 6ee334559324a55725e22463de633b99ad99fcad upstream.

Pull up was reported as pull down and vice versa. Fix this.

Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints"
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: Fix A33 external interrupts not working

commit 5e7515ba78fff2f5407eaa2f97c1d5c07801ac3d upstream.

pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks,
where as the closely related a23 has 3 banks. This matches with the
datasheet for the A33 where only interrupt banks B and G are specified
where as the A23 has banks A, B and G.

However the A33 being the A23 derative it is means that the interrupt
configure/status io-addresses for the 2 banks it has are not changed
from the A23, iow they have the same address as if bank A was still
present. Where as the sunxi pinctrl currently tries to use the A23 bank
A addresses for bank B, since the pinctrl code does not know about the
removed bank A.

Add a irq_bank_base parameter and use this where appropriate to take
the missing bank A into account.

This fixes external interrupts not working on the A33 (tested with
an i2c touchscreen controller which uses an external interrupt).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: only use dummy states for non-DT platforms

commit 0129801be4b87226bf502f18f5a9eabd356d1058 upstream.

If pinctrl_provide_dummies() is used unconditionally, then the dummy
state will be used even on DT platforms when the "init" state was
intentionally left out. Instead of "default", the dummy "init" state
will then be used during probe. Thus, when probing an I2C controller on
cold boot, communication triggered by bus notifiers broke because the
pins were not initialized.

Do it like OMAP2: use the dummy state only for non-DT platforms.

Fixes: ef0eebc05130 ("drivers/pinctrl: Add the concept of an "init" state")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: pistachio: fix mfio84-89 function description and pinmux.

commit e9adb336d0bf391be23e820975ca5cd12c31d781 upstream.

mfio 84 to 89 are described wrongly, fix it to describe
the right pin and add them to right pin-mux group.

The correct order is:
pll1_lock => mips_pll -- MFIO_83
pll2_lock => audio_pll -- MFIO_84
pll3_lock => rpu_v_pll -- MFIO_85
pll4_lock => rpu_l_pll -- MFIO_86
pll5_lock => sys_pll -- MFIO_87
pll6_lock => wifi_pll -- MFIO_88
pll7_lock => bt_pll -- MFIO_89

Cc: linux-gpio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: James Hartley <James.Hartley@imgtec.com>
Fixes: cefc03e5995e("pinctrl: Add Pistachio SoC pin control driver")
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix MSA ld unaligned failure cases

commit fa8ff601d72bad3078ddf5ef17a5547700d06908 upstream.

Copying the content of an MSA vector from user memory may involve TLB
faults & mapping in pages. This will fail when preemption is disabled
due to an inability to acquire mmap_sem from do_page_fault, which meant
such vector loads to unmapped pages would always fail to be emulated.
Fix this by disabling preemption later only around the updating of
vector register state.

This change does however introduce a race between performing the load
into thread context & the thread being preempted, saving its current
live context & clobbering the loaded value. This should be a rare
occureence, so optimise for the fast path by simply repeating the load if
we are preempted.

Additionally if the copy failed then the failure path was taken with
preemption left disabled, leading to the kernel typically encountering
further issues around sleeping whilst atomic. The change to where
preemption is disabled avoids this issue.

Fixes: e4aa1f153add "MIPS: MSA unaligned memory access support"
Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: reduce default value of halt_poll_ns parameter

commit 14ebda3394fd3e5388747e742e510b0802a65d24 upstream.

Windows lets applications choose the frequency of the timer tick,
and in Windows 10 the maximum rate was changed from 1024 Hz to
2048 Hz.  Unfortunately, because of the way the Windows API
works, most applications who need a higher rate than the default
64 Hz will just do

   timeGetDevCaps(&tc, sizeof(tc));
   timeBeginPeriod(tc.wPeriodMin);

and pick the maximum rate.  This causes very high CPU usage when
playing media or games on Windows 10, even if the guest does not
actually use the CPU very much, because the frequent timer tick
causes halt_poll_ns to kick in.

There is no really good solution, especially because Microsoft
could sooner or later bump the limit to 4096 Hz, but for now
the best we can do is lower a bit the upper limit for
halt_poll_ns. :-(

Reported-by: Jon Panozzo <jonp@lime-technology.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Inject pending interrupt even if pending nmi exist

commit 321c5658c5e9192dea0d58ab67cf1791e45b2b26 upstream.

Non maskable interrupts (NMI) are preferred to interrupts in current
implementation. If a NMI is pending and NMI is blocked by the result
of nmi_allowed(), pending interrupt is not injected and
enable_irq_window() is not executed, even if interrupts injection is
allowed.

In old kernel (e.g. 2.6.32), schedule() is often called in NMI context.
In this case, interrupts are needed to execute iret that intends end
of NMI. The flag of blocking new NMI is not cleared until the guest
execute the iret, and interrupts are blocked by pending NMI. Due to
this, iret can't be invoked in the guest, and the guest is starved
until block is cleared by some events (e.g. canceling injection).

This patch injects pending interrupts, when it's allowed, even if NMI
is blocked. And, If an interrupts is pending after executing
inject_pending_event(), enable_irq_window() is executed regardless of
NMI pending counter.

Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: fix NULL pointer reference

commit 29c6dd591bbd592472247441de9fa694acdabae8 upstream.

The union descriptor must be checked. Its usage was conditional
before the parser was introduced. This is important, because
many RNDIS device, which also use the common parser, have
bogus extra descriptors.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Vasily Galkin <galkin-vv@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: uas: Add a new NO_REPORT_LUNS quirk

commit 1363074667a6b7d0507527742ccd7bbed5e3ceaa upstream.

Add a new NO_REPORT_LUNS quirk and set it for Seagate drives with
an usb-id of: 0bc2:331a, as these will fail to respond to a
REPORT_LUNS command.

Reported-and-tested-by: David Webb <djw@noc.ac.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: uas: Limit qdepth at the scsi-host level

commit 198de51dbc3454d95b015ca0a055b673f85f01bb upstream.

Commit 64d513ac31bd ("scsi: use host wide tags by default") causes
the SCSI core to queue more commands then we can handle on devices with
multiple LUNs, limit the queue depth at the scsi-host level instead of
per slave to fix this.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1315013
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpls: find_outdev: check for err ptr in addition to NULL check

[ Upstream commit 94a57f1f8a9de90ab4b0f8748361ff8be706c80c ]

find_outdev calls inet{,6}_fib_lookup_dev() or dev_get_by_index() to
find the output device. In case of an error, inet{,6}_fib_lookup_dev()
returns error pointer and dev_get_by_index() returns NULL. But the function
only checks for NULL and thus can end up calling dev_put on an ERR_PTR.
This patch adds an additional check for err ptr after the NULL check.

Before: Trying to add an mpls route with no oif from user, no available
path to 10.1.1.8 and no default route:
$ip -f mpls route add 100 as 200 via inet 10.1.1.8
[  822.337195] BUG: unable to handle kernel NULL pointer dereference at
00000000000003a3
[  822.340033] IP: [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182
[  822.340033] PGD 1db38067 PUD 1de9e067 PMD 0
[  822.340033] Oops: 0000 [#1] SMP
[  822.340033] Modules linked in:
[  822.340033] CPU: 0 PID: 11148 Comm: ip Not tainted 4.5.0-rc7+ #54
[  822.340033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org
04/01/2014
[  822.340033] task: ffff88001db82580 ti: ffff88001dad4000 task.ti:
ffff88001dad4000
[  822.340033] RIP: 0010:[<ffffffff8148781e>]  [<ffffffff8148781e>]
mpls_nh_assign_dev+0x10b/0x182
[  822.340033] RSP: 0018:ffff88001dad7a88  EFLAGS: 00010282
[  822.340033] RAX: ffffffffffffff9b RBX: ffffffffffffff9b RCX:
0000000000000002
[  822.340033] RDX: 00000000ffffff9b RSI: 0000000000000008 RDI:
0000000000000000
[  822.340033] RBP: ffff88001ddc9ea0 R08: ffff88001e9f1768 R09:
0000000000000000
[  822.340033] R10: ffff88001d9c1100 R11: ffff88001e3c89f0 R12:
ffffffff8187e0c0
[  822.340033] R13: ffffffff8187e0c0 R14: ffff88001ddc9e80 R15:
0000000000000004
[  822.340033] FS:  00007ff9ed798700(0000) GS:ffff88001fc00000(0000)
knlGS:0000000000000000
[  822.340033] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  822.340033] CR2: 00000000000003a3 CR3: 000000001de89000 CR4:
00000000000006f0
[  822.340033] Stack:
[  822.340033]  0000000000000000 0000000100000000 0000000000000000
0000000000000000
[  822.340033]  0000000000000000 0801010a00000000 0000000000000000
0000000000000000
[  822.340033]  0000000000000004 ffffffff8148749b ffffffff8187e0c0
000000000000001c
[  822.340033] Call Trace:
[  822.340033]  [<ffffffff8148749b>] ? mpls_rt_alloc+0x2b/0x3e
[  822.340033]  [<ffffffff81488e66>] ? mpls_rtm_newroute+0x358/0x3e2
[  822.340033]  [<ffffffff810e7bbc>] ? get_page+0x5/0xa
[  822.340033]  [<ffffffff813b7d94>] ? rtnetlink_rcv_msg+0x17e/0x191
[  822.340033]  [<ffffffff8111794e>] ? __kmalloc_track_caller+0x8c/0x9e
[  822.340033]  [<ffffffff813c9393>] ?
rht_key_hashfn.isra.20.constprop.57+0x14/0x1f
[  822.340033]  [<ffffffff813b7c16>] ? __rtnl_unlock+0xc/0xc
[  822.340033]  [<ffffffff813cb794>] ? netlink_rcv_skb+0x36/0x82
[  822.340033]  [<ffffffff813b4507>] ? rtnetlink_rcv+0x1f/0x28
[  822.340033]  [<ffffffff813cb2b1>] ? netlink_unicast+0x106/0x189
[  822.340033]  [<ffffffff813cb5b3>] ? netlink_sendmsg+0x27f/0x2c8
[  822.340033]  [<ffffffff81392ede>] ? sock_sendmsg_nosec+0x10/0x1b
[  822.340033]  [<ffffffff81393df1>] ? ___sys_sendmsg+0x182/0x1e3
[  822.340033]  [<ffffffff810e4f35>] ?
__alloc_pages_nodemask+0x11c/0x1e4
[  822.340033]  [<ffffffff8110619c>] ? PageAnon+0x5/0xd
[  822.340033]  [<ffffffff811062fe>] ? __page_set_anon_rmap+0x45/0x52
[  822.340033]  [<ffffffff810e7bbc>] ? get_page+0x5/0xa
[  822.340033]  [<ffffffff810e85ab>] ? __lru_cache_add+0x1a/0x3a
[  822.340033]  [<ffffffff81087ea9>] ? current_kernel_time64+0x9/0x30
[  822.340033]  [<ffffffff813940c4>] ? __sys_sendmsg+0x3c/0x5a
[  822.340033]  [<ffffffff8148f597>] ?
entry_SYSCALL_64_fastpath+0x12/0x6a
[  822.340033] Code: 83 08 04 00 00 65 ff 00 48 8b 3c 24 e8 40 7c f2 ff
eb 13 48 c7 c3 9f ff ff ff eb 0f 89 ce e8 f1 ae f1 ff 48 89 c3 48 85 db
74 15 <48> 8b 83 08 04 00 00 65 ff 08 48 81 fb 00 f0 ff ff 76 0d eb 07
[  822.340033] RIP  [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182
[  822.340033]  RSP <ffff88001dad7a88>
[  822.340033] CR2: 00000000000003a3
[  822.435363] ---[ end trace 98cc65e6f6b8bf11 ]---

After patch:
$ip -f mpls route add 100 as 200 via inet 10.1.1.8
RTNETLINK answers: Network is unreachable

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Count in extension headers in skb->network_header

[ Upstream commit 3ba3458fb9c050718b95275a3310b74415e767e2 ]

When sending a UDPv6 message longer than MTU, account for the length
of fragmentable IPv6 extension headers in skb->network_header offset.
Same as we do in alloc_new_skb path in __ip6_append_data().

This ensures that later on __ip6_make_skb() will make space in
headroom for fragmentable extension headers:

/* move skb->data to ip header from ext header */
if (skb->data < skb_network_header(skb))
__skb_pull(skb, skb_network_offset(skb));

Prevents a splat due to skb_under_panic:

skbuff: skb_under_panic: text:ffffffff8143397b len:2126 put:14 \
head:ffff880005bacf50 data:ffff880005bacf4a tail:0x48 end:0xc0 dev:lo
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [#1] KASAN
CPU: 0 PID: 160 Comm: reproducer Not tainted 4.6.0-rc2 #65
[...]
Call Trace:
 [<ffffffff813eb7b9>] skb_push+0x79/0x80
 [<ffffffff8143397b>] eth_header+0x2b/0x100
 [<ffffffff8141e0d0>] neigh_resolve_output+0x210/0x310
 [<ffffffff814eab77>] ip6_finish_output2+0x4a7/0x7c0
 [<ffffffff814efe3a>] ip6_output+0x16a/0x280
 [<ffffffff815440c1>] ip6_local_out+0xb1/0xf0
 [<ffffffff814f1115>] ip6_send_skb+0x45/0xd0
 [<ffffffff81518836>] udp_v6_send_skb+0x246/0x5d0
 [<ffffffff8151985e>] udpv6_sendmsg+0xa6e/0x1090
[...]

Reported-by: Ji Jianwen <jiji@redhat.com>
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: set rtnl_link_ops before calling register_netdevice

[ Upstream commit b6ee376cb0b7fb4e7e07d6cd248bd40436fb9ba6 ]

When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set
before ip6_tnl_create2 is called. When register_netdevice is called, there
is no linkinfo attribute in the NEWLINK message because of that.

Setting rtnl_link_ops before calling register_netdevice fixes that.

Fixes: 0b112457229d ("ip6tnl: add support of link creation via rtnl")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: l2tp: fix a potential issue in l2tp_ip6_recv

[ Upstream commit be447f305494e019dfc37ea4cdf3b0e4200b4eba ]

pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: l2tp: fix a potential issue in l2tp_ip_recv

[ Upstream commit 5745b8232e942abd5e16e85fa9b27cc21324acf0 ]

pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tuntap: restore default qdisc

[ Upstream commit 016adb7260f481168c03e09f785184d6d5278894 ]

After commit f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using
alloc_netdev"), default qdisc was changed to noqueue because
tuntap does not set tx_queue_len during .setup(). This patch restores
default qdisc by setting tx_queue_len in tun_setup().

Fixes: f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev")
Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter

[ Upstream commit 5a5abb1fa3b05dd6aa821525832644c1e7d2905f ]

Sasha Levin reported a suspicious rcu_dereference_protected() warning
found while fuzzing with trinity that is similar to this one:

  [   52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage!
  [   52.765688] other info that might help us debug this:
  [   52.765695] rcu_scheduler_active = 1, debug_locks = 1
  [   52.765701] 1 lock held by a.out/1525:
  [   52.765704]  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20
  [   52.765721] stack backtrace:
  [   52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264
  [...]
  [   52.765768] Call Trace:
  [   52.765775]  [<ffffffff813e488d>] dump_stack+0x85/0xc8
  [   52.765784]  [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110
  [   52.765792]  [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90
  [   52.765801]  [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun]
  [   52.765810]  [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun]
  [   52.765818]  [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210
  [   52.765827]  [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun]
  [   52.765834]  [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690
  [   52.765843]  [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60
  [   52.765850]  [<ffffffff81261519>] SyS_ioctl+0x79/0x90
  [   52.765858]  [<ffffffff81003ba2>] do_syscall_64+0x62/0x140
  [   52.765866]  [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25

Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled
from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH,
DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices.

Since the fix in f91ff5b9ff52 ("net: sk_{detach|attach}_filter() rcu
fixes") sk_attach_filter()/sk_detach_filter() now dereferences the
filter with rcu_dereference_protected(), checking whether socket lock
is held in control path.

Since its introduction in 994051625981 ("tun: socket filter support"),
tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the
sock_owned_by_user(sk) doesn't apply in this specific case and therefore
triggers the false positive.

Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair
that is used by tap filters and pass in lockdep_rtnl_is_held() for the
rcu_dereference_protected() checks instead.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnl: fix msg size calculation in if_nlmsg_size()

[ Upstream commit c57c7a95da842807b475b823ed2e5435c42cb3b0 ]

Size of the attribute IFLA_PHYS_PORT_NAME was missing.

Fixes: db24a9044ee1 ("net: add support for phys_port_name")
CC: David Ahern <dsahern@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: Allow set bridge ageing time when switchdev disabled

[ Upstream commit 5e263f712691615fb802f06c98d7638c378f5d11 ]

When NET_SWITCHDEV=n, switchdev_port_attr_set will return -EOPNOTSUPP,
we should ignore this error code and continue to set the ageing time.

Fixes: c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates

[ Upstream commit 2d4212261fdf13e29728ddb5ea9d60c342cc92b5 ]

IPv6 counters updates use a different macro than IPv4.

Fixes: 36cbb2452cbaf ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rick Jones <rick.jones2@hp.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: add "D-Link DWM-221 B1" device id

[ Upstream commit e84810c7b85a2d7897797b3ad3e879168a8e032a ]

Thomas reports:
"Windows:

00 diagnostics
01 modem
02 at-port
03 nmea
04 nic

Linux:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7e19 Rev=02.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage"

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Fix crash observed during device unregistration and decryption

[ Upstream commit 071d36bf21bcc837be00cea55bcef8d129e7f609 ]

A crash is observed when a decrypted packet is processed in receive
path. get_rps_cpus() tries to dereference the skb->dev fields but it
appears that the device is freed from the poison pattern.

[<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0
[<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc
[<ffffffc000af6094>] netif_rx+0x74/0x94
[<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0
[<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c
[<ffffffc000ba6eb8>] esp_input_done+0x20/0x30
[<ffffffc0000b64c8>] process_one_work+0x244/0x3fc
[<ffffffc0000b7324>] worker_thread+0x2f8/0x418
[<ffffffc0000bb40c>] kthread+0xe0/0xec

-013|get_rps_cpu(
     |    dev = 0xFFFFFFC08B688000,
     |    skb = 0xFFFFFFC0C76AAC00 -> (
     |      dev = 0xFFFFFFC08B688000 -> (
     |        name =
"......................................................
     |        name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev =
0xAAAAAAAAAAA

Following are the sequence of events observed -

- Encrypted packet in receive path from netdevice is queued
- Encrypted packet queued for decryption (asynchronous)
- Netdevice brought down and freed
- Packet is decrypted and returned through callback in esp_input_done
- Packet is queued again for process in network stack using netif_rx

Since the device appears to have been freed, the dereference of
skb->dev in get_rps_cpus() leads to an unhandled page fault
exception.

Fix this by holding on to device reference when queueing packets
asynchronously and releasing the reference on call back return.

v2: Make the change generic to xfrm as mentioned by Steffen and
update the title to xfrm

Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jerome Stanislaus <jeromes@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: take reference on channels netns

[ Upstream commit 1f461dcdd296eecedaffffc6bae2bfa90bd7eb89 ]

Let channels hold a reference on their network namespace.
Some channel types, like ppp_async and ppp_synctty, can have their
userspace controller running in a different namespace. Therefore they
can't rely on them to preclude their netns from being removed from
under them.

==================================================================
BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at
addr ffff880064e217e0
Read of size 8 by task syz-executor/11581
=============================================================================
BUG net_namespace (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906
[<      none      >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440
[<      none      >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469
[<     inline     >] slab_alloc_node kernel/mm/slub.c:2532
[<     inline     >] slab_alloc kernel/mm/slub.c:2574
[<      none      >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579
[<     inline     >] kmem_cache_zalloc kernel/include/linux/slab.h:597
[<     inline     >] net_alloc kernel/net/core/net_namespace.c:325
[<      none      >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360
[<      none      >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95
[<      none      >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150
[<      none      >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451
[<     inline     >] copy_process kernel/kernel/fork.c:1274
[<      none      >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723
[<     inline     >] SYSC_clone kernel/kernel/fork.c:1832
[<      none      >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826
[<      none      >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185

INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631
[<      none      >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650
[<     inline     >] slab_free kernel/mm/slub.c:2805
[<      none      >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814
[<     inline     >] net_free kernel/net/core/net_namespace.c:341
[<      none      >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348
[<      none      >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448
[<      none      >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036
[<      none      >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170
[<      none      >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303
[<      none      >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468
INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000
flags=0x5fffc0000004080
INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200

CPU: 1 PID: 11581 Comm: syz-executor Tainted: G    B           4.4.0+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300
 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054
 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000
Call Trace:
 [<     inline     >] __dump_stack kernel/lib/dump_stack.c:15
 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50
 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654
 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661
 [<     inline     >] print_address_description kernel/mm/kasan/report.c:138
 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236
 [<     inline     >] kasan_report kernel/mm/kasan/report.c:259
 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280
 [<     inline     >] ? ppp_pernet kernel/include/linux/compiler.h:218
 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<     inline     >] ppp_pernet kernel/include/linux/compiler.h:218
 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<     inline     >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293
 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241
 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000
 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478
 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744
 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772
 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901
 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688
 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208
 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244
 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115
 [<     inline     >] exit_task_work kernel/include/linux/task_work.h:21
 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750
 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123
 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357
 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550
 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145
 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880
 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307
 [<     inline     >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113
 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158
 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712
 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655
 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165
 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692
 [<     inline     >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099
 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678
 [<     inline     >] ? context_switch kernel/kernel/sched/core.c:2807
 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283
 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247
 [<     inline     >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282
 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344
 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281
Memory state around the buggy address:
 ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: initialize flowi4_flags before calling fib_lookup()

[ Upstream commit 4cfc86f3dae6ca38ed49cdd78f458a03d4d87992 ]

Field fl4.flowi4_flags is not initialized in fib_compute_spec_dst()
before calling fib_lookup(), which means fib_table_lookup() is
using non-deterministic data at this line:

if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) {

Fix by initializing the entire fl4 structure, which will prevent
similar issues as fields are added in the future by ensuring that
all fields are initialized to zero unless explicitly initialized
to another value.

Fixes: 58189ca7b2741 ("net: Fix vti use case with oif in dst lookups")
Suggested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix broadcast packets reception

[ Upstream commit ad0ea1989cc4d5905941d0a9e62c63ad6d859cef ]

Currently, ingress ipv4 broadcast datagrams are dropped since,
in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on
bcast packets.

This patch addresses the issue, invoking ip_check_mc_rcu()
only for mcast packets.

Fixes: 6e5403093261 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: fix bond_get_stats()

[ Upstream commit fe30937b65354c7fec244caebbdaae68e28ca797 ]

bond_get_stats() can be called from rtnetlink (with RTNL held)
or from /proc/net/dev seq handler (with RCU held)

The logic added in commit 5f0c5f73e5ef ("bonding: make global bonding
stats more reliable") kind of assumed only one cpu could run there.

If multiple threads are reading /proc/net/dev, stats can be really
messed up after a while.

A second problem is that some fields are 32bit, so we need to properly
handle the wrap around problem.

Given that RTNL is not always held, we need to use
bond_for_each_slave_rcu().

Fixes: 5f0c5f73e5ef ("bonding: make global bonding stats more reliable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: fix dma api length mismatch

[ Upstream commit eee577232203842b4dcadb7ab477a298479633ed ]

When un-mapping skb->data in __bcmgenet_tx_reclaim(),
we must use the length that was used in original dma_map_single(),
instead of skb->len that might be bigger (includes the frags)

We simply can store skb_len into tx_cb_ptr->dma_len and use it
at unmap time.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlge: Fix receive packets drop.

[ Upstream commit 2c9a266afefe137bff06bbe0fc48b4d3b3cb348c ]

When running small packets [length < 256 bytes] traffic, packets were
being dropped due to invalid data in those packets which were
delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu
ensures copying latest and updated data into skb from the receive buffer.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp/dccp: remove obsolete WARN_ON() in icmp handlers

[ Upstream commit e316ea62e3203d524ff0239a40c56d3a39ad1b5c ]

Now SYN_RECV request sockets are installed in ehash table, an ICMP
handler can find a request socket while another cpu handles an incoming
packet transforming this SYN_RECV request socket into an ESTABLISHED
socket.

We need to remove the now obsolete WARN_ON(req->sk), since req->sk
is set when a new child is created and added into listener accept queue.

If this race happens, the ICMP will do nothing special.

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Lazarus <blazarus@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: ensure file->private_data can't be overridden

[ Upstream commit e8e56ffd9d2973398b60ece1f1bebb8d67b4d032 ]

Locking ppp_mutex must be done before dereferencing file->private_data,
otherwise it could be modified before ppp_unattached_ioctl() takes the
lock. This could lead ppp_unattached_ioctl() to override ->private_data,
thus leaking reference to the ppp_file previously pointed to.

v2: lock all ppp_ioctl() instead of just checking private_data in
    ppp_unattached_ioctl(), to avoid ambiguous behaviour.

Fixes: f3ff8a4d80e8 ("ppp: push BKL down into the driver")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: fix buffer overrun for ar9287

[ Upstream commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 ]

Code that was added back in 2.6.38 has an obvious overflow
when accessing a static array, and at the time it was added
only a code comment was put in front of it as a reminder
to have it reviewed properly.

This has not happened, but gcc-6 now points to the specific
overflow:

drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs':
drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds]
     maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4];
                   ~~~~~~~~~~~~~~~~~~~~~~~~~^~~

It turns out that the correct array length exists in the local
'intercepts' variable of this function, so we can just use that
instead of hardcoding '4', so this patch changes all three
instances to use that variable. The other two instances were
already correct, but it's more consistent this way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

farsync: fix off-by-one bug in fst_add_one

[ Upstream commit e725a66c0202b5f36c2f9d59d26a65c53bbf21f7 ]

gcc-6 finds an out of bounds access in the fst_add_one function
when calculating the end of the mmio area:

drivers/net/wan/farsync.c: In function 'fst_add_one':
drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds]
 #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                                     ^
include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof'
  __builtin_offsetof(a, b)
                     ^
drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof'
 #define BUF_OFFSET(X)   (BFM_BASE + offsetof(struct buf_window, X))
                                     ^~~~~~~~
drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET'
                                  + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]);
                                    ^~~~~~~~~~

The warning is correct, but not critical because this appears
to be a write-only variable that is set by each WAN driver but
never accessed afterwards.

I'm taking the minimal fix here, using the correct pointer by
pointing 'mem_end' to the last byte inside of the register area
as all other WAN drivers do, rather than the first byte outside of
it. An alternative would be to just remove the mem_end member
entirely.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx4: add missing braces in verify_qp_parameters

[ Upstream commit baefd7015cdb304ce6c94f9679d0486c71954766 ]

The implementation of QP paravirtualization back in linux-3.7 included
some code that looks very dubious, and gcc-6 has grown smart enough
to warn about it:

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters':
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
     if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) {
     ^~
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not
    if (slave != mlx4_master_func_num(dev))

>From looking at the context, I'm reasonably sure that the indentation
is correct but that it should have contained curly braces from the
start, as the update_gid() function in the same patch correctly does.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix use after free in the recvmmsg exit path

[ Upstream commit 34b88a68f26a75e4fded796f1a49c40f82234b7d ]

The syzkaller fuzzer hit the following use-after-free:

  Call Trace:
   [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
   [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
   [<     inline     >] SYSC_recvmmsg net/socket.c:2281
   [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
   [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
  arch/x86/entry/entry_64.S:185

And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.

Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541fa ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Don't do expensive useless work during inetdev destroy.

[ Upstream commit fbd40ea0180a2d328c5adc61414dc8bab9335ce2 ]

When an inetdev is destroyed, every address assigned to the interface
is removed.  And in this scenerio we do two pointless things which can
be very expensive if the number of assigned interfaces is large:

1) Address promotion.  We are deleting all addresses, so there is no
   point in doing this.

2) A full nf conntrack table purge for every address.  We only need to
   do this once, as is already caught by the existing
   masq_dev_notifier so masq_inet_event() can skip this.

Reported-by: Solar Designer <solar@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: allow zero ageing time

[ Upstream commit 4c656c13b254d598e83e586b7b4d36a2043dad85 ]

This fixes a regression in the bridge ageing time caused by:
commit c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev")

There are users of Linux bridge which use the feature that if ageing time
is set to 0 it causes entries to never expire. See:
  https://www.linuxfoundation.org/collaborate/workgroups/networking/bridge

For a pure software bridge, it is unnecessary for the code to have
arbitrary restrictions on what values are allowable.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rocker: set FDB cleanup timer according to lowest ageing time

[ Upstream commit 88de1cd457e5cb664d6d437e2ea4750d089165f5 ]

In rocker, ageing time is a per-port attribute, so the next time the FDB
cleanup timer fires should be set according to the lowest ageing time.

This will later allow us to delete the BR_MIN_AGEING_TIME macro, which was
added to guarantee minimum ageing time in the bridge layer, thereby breaking
existing behavior.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Check requested ageing time is valid

[ Upstream commit 869f63a4d28144c03c8f4a4c0d1e8f31f8c11a10 ]

Commit c62987bbd8a1 ("bridge: push bridge setting ageing_time down to
switchdev") added a check for minimum and maximum ageing time, but this
breaks existing behaviour where one can set ageing time to 0 for a
non-learning bridge.

Push this check down to the driver and allow the check in the bridge
layer to be removed. Currently ageing time 0 is refused by the driver,
but we can later add support for this functionality.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: always pass ethernet header in linear

[ Upstream commit 8e2ad4113ce4671686740f808ff2795395c39eef ]

The stack expects link layer headers in the skb linear section.
Macvtap can create skbs with llheader in frags in edge cases:
when (IFF_VNET_HDR is off or vnet_hdr.hdr_len < ETH_HLEN) and
prepad + len > PAGE_SIZE and vnet_hdr.flags has no or bad csum.

Add checks to ensure linear is always at least ETH_HLEN.
At this point, len is already ensured to be >= ETH_HLEN.

For backwards compatiblity, rounds up short vnet_hdr.hdr_len.
This differs from tap and packet, which return an error.

Fixes b9fb9ee07e67 ("macvtap: add GSO/csum offload support")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlcnic: Fix mailbox completion handling during spurious interrupt

[ Upstream commit 819bfe764dceec2f6b4551768453f374b4c60443 ]

o While the driver is in the middle of a MB completion processing
and it receives a spurious MB interrupt, it is mistaken as a good MB
completion interrupt leading to premature completion of the next MB
request. Fix the driver to guard against this by checking the current
state of MB processing and ignore the spurious interrupt.
Also added a stats counter to record this condition.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlcnic: Remove unnecessary usage of atomic_t

[ Upstream commit 5bf93251cee1fb66141d1d2eaff86e04a9397bdf ]

o atomic_t usage is incorrect as we are not implementing
any atomicity.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh_eth: advance 'rxdesc' later in sh_eth_ring_format()

[ Upstream commit d0ba913488dc8c55d1880f5ed34f096dc45fb05d ]

Iff dma_map_single() fails, 'rxdesc'  should point  to the last filled RX
descriptor, so  that it can be marked as the last one, however the driver
would have  already  advanced it by that time. In order to fix that, only
fill  an RX descriptor  once all the data for it is ready.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh_eth: fix NULL pointer dereference in sh_eth_ring_format()

[ Upstream commit c1b7fca65070bfadca94dd53a4e6b71cd4f69715 ]

In a low memory situation, if netdev_alloc_skb() fails on a first RX ring
loop iteration  in sh_eth_ring_format(), 'rxdesc' is still NULL.  Avoid
kernel oops by adding the 'rxdesc' check after the loop.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: avoid copying junk bytes in bpf_get_current_comm()

[ Upstream commit cdc4e47da8f4c32eeb6b2061a8a834f4362a12b7 ]

Lots of places in the kernel use memcpy(buf, comm, TASK_COMM_LEN); but
the result is typically passed to print("%s", buf) and extra bytes
after zero don't cause any harm.
In bpf the result of bpf_get_current_comm() is used as the part of
map key and was causing spurious hash map mismatches.
Use strlcpy() to guarantee zero-terminated string.
bpf verifier checks that output buffer is zero-initialized,
so even for short task names the output buffer don't have junk bytes.
Note it's not a security concern, since kprobe+bpf is root only.

Fixes: ffeedafbf023 ("bpf: introduce current->pid, tgid, uid, gid, comm accessors")
Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: validate variable length ll headers

[ Upstream commit 9ed988cd591500c040b2a6257bc68543e08ceeef ]

Replace link layer header validation check ll_header_truncate with
more generic dev_validate_header.

Validation based on hard_header_len incorrectly drops valid packets
in variable length protocols, such as AX25. dev_validate_header
calls header_ops.validate for such protocols to ensure correctness
below hard_header_len.

See also http://comments.gmane.org/gmane.linux.network/401064

Fixes 9c7077622dd9 ("packet: make packet_snd fail on len smaller than l2 header")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ax25: add link layer header validation function

[ Upstream commit ea47781c26510e5d97f80f9aceafe9065bd5e3aa ]

As variable length protocol, AX25 fails link layer header validation
tests based on a minimum length. header_ops.validate allows protocols
to validate headers that are shorter than hard_header_len. Implement
this callback for AX25.

See also http://comments.gmane.org/gmane.linux.network/401064

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: validate variable length ll headers

[ Upstream commit 2793a23aacbd754dbbb5cb75093deb7e4103bace ]

Netdevice parameter hard_header_len is variously interpreted both as
an upper and lower bound on link layer header length. The field is
used as upper bound when reserving room at allocation, as lower bound
when validating user input in PF_PACKET.

Clarify the definition to be maximum header length. For validation
of untrusted headers, add an optional validate member to header_ops.

Allow bypassing of validation by passing CAP_SYS_RAWIO, for instance
for deliberate testing of corrupt input. In this case, pad trailing
bytes, as some device drivers expect completely initialized headers.

See also http://comments.gmane.org/gmane.linux.network/401064

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: release rtnl mutex when interface creation fails

[ Upstream commit 6faac63a6986f29ef39827f460edd3a5ba64ad5c ]

Add missing rtnl_unlock() in the error path of ppp_create_interface().

Fixes: 58a89ecaca53 ("ppp: fix lockdep splat in ppp_dev_uninit()")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcpi_segs_in after connection establishment

[ Upstream commit a9d99ce28ed359d68cf6f3c1a69038aefedf6d6a ]

If final packet (ACK) of 3WHS is lost, it appears we do not properly
account the following incoming segment into tcpi_segs_in

While we are at it, starts segs_in with one, to count the SYN packet.

We do not yet count number of SYN we received for a request sock, we
might add this someday.

packetdrill script showing proper behavior after fix :

// Tests tcpi_segs_in when 3rd packet (ACK) of 3WHS is lost
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

   +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop>
   +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.020 < P. 1:1001(1000) ack 1 win 32792

   +0 accept(3, ..., ...) = 4

+.000 %{ assert tcpi_segs_in == 2, 'tcpi_segs_in=%d' % tcpi_segs_in }%

Fixes: 2efd055c53c06 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp6: fix UDP/IPv6 encap resubmit path

[ Upstream commit 59dca1d8a6725a121dae6c452de0b2611d5865dc ]

IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol.  In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.

UDP for IPv6 was unaware of this difference.  Change __udp6_lib_rcv() to
return a positive value for redispatch.  Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.

Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: cleanup after bind() in probe()

[ Upstream commit 1666984c8625b3db19a9abc298931d35ab7bc64b ]

In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc_ncm: toggle altsetting to force reset before setup

[ Upstream commit 48906f62c96cc2cd35753e59310cb70eb08cc6a5 ]

Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time.  Briefly toggling the altsetting forces a function
reset regardless of the initial state.

This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: fix missing options_len update on RX with collect metadata

[ Upstream commit 4024fcf70556311521e7b6cf79fa50e16f31013a ]

When signalling to metadata consumers that the metadata_dst entry
carries additional GBP extension data for vxlan (TUNNEL_VXLAN_OPT),
the dst's vxlan_metadata information is populated, but options_len
is left to zero. F.e. in ovs, ovs_flow_key_extract() checks for
options_len before extracting the data through ip_tunnel_info_opts_get().

Geneve uses ip_tunnel_info_opts_set() helper in receive path, which
sets options_len internally, vxlan however uses ip_tunnel_info_opts(),
so when filling vxlan_metadata, we do need to update options_len.

Fixes: 4c22279848c5 ("ip-tunnel: Use API to access tunnel metadata options.")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: re-enable fragment header matching in ipv6_find_hdr

[ Upstream commit 5d150a985520bbe3cb2aa1ceef24a7e32f20c15f ]

When ipv6_find_hdr is used to find a fragment header
(caller specifies target NEXTHDR_FRAGMENT) we erronously return
-ENOENT for all fragments with nonzero offset.

Before commit 9195bb8e381d, when target was specified, we did not
enter the exthdr walk loop as nexthdr == target so this used to work.

Now we do (so we can skip empty route headers). When we then stumble upon
a frag with nonzero frag_off we must return -ENOENT ("header not found")
only if the caller did not specifically request NEXTHDR_FRAGMENT.

This allows nfables exthdr expression to match ipv6 fragments, e.g. via

nft add rule ip6 filter input frag frag-off gt 0

Fixes: 9195bb8e381d ("ipv6: improve ipv6_find_hdr() to skip empty routing headers")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: add Sierra Wireless EM74xx device ID

[ Upstream commit bf13c94ccb33c3182efc92ce4989506a0f541243 ]

The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"

[ Upstream commit f214fc402967e1bc94ad7f39faa03db5813d6849 ]

reverts commit 94153e36e709e ("tipc: use existing sk_write_queue for
outgoing packet chain")

In Commit 94153e36e709e, we assume that we fill & empty the socket's
sk_write_queue within the same lock_sock() session.

This is not true if the link is congested. During congestion, the
socket lock is released while we wait for the congestion to cease.
This implementation causes a nullptr exception, if the user space
program has several threads accessing the same socket descriptor.

Consider two threads of the same program performing the following:
     Thread1                                  Thread2
--------------------                    ----------------------
Enter tipc_sendmsg()                    Enter tipc_sendmsg()
lock_sock()                             lock_sock()
Enter tipc_link_xmit(), ret=ELINKCONG   spin on socket lock..
sk_wait_event()                             :
release_sock()                          grab socket lock
    :                                   Enter tipc_link_xmit(), ret=0
    :                                   release_sock()
Wakeup after congestion
lock_sock()
skb = skb_peek(pktchain);
!! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong;

In this case, the second thread transmits the buffers belonging to
both thread1 and thread2 successfully. When the first thread wakeup
after the congestion it assumes that the pktchain is intact and
operates on the skb's in it, which leads to the following exception:

[2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
[2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc]
[2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0
[2102.440074] Oops: 0000 [#1] SMP
[2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1
[2102.440074] RIP: 0010:[<ffffffffa005f330>]  [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc]
[...]
[2102.440074] Call Trace:
[2102.440074]  [<ffffffff8163f0b9>] ? schedule+0x29/0x70
[2102.440074]  [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc]
[2102.440074]  [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc]
[2102.440074]  [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc]
[2102.440074]  [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20
[2102.440074]  [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc]
[2102.440074]  [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0
[2102.440074]  [<ffffffff81507895>] ? release_sock+0x145/0x170
[2102.440074]  [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0
[2102.440074]  [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10
[2102.440074]  [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0
[2102.440074]  [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0
[2102.440074]  [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20
[2102.440074]  [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0
[2102.440074]  [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950
[2102.440074]  [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80
[2102.440074]  [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20
[2102.440074]  [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b

In this commit, we maintain the skb list always in the stack.

Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mld, igmp: Fix reserved tailroom calculation

[ Upstream commit 1837b2e2bcd23137766555a63867e649c0b637f0 ]

The current reserved_tailroom calculation fails to take hlen and tlen into
account.

skb:
[__hlen__|__data____________|__tlen___|__extra__]
^                                               ^
head                                            skb_end_offset

In this representation, hlen + data + tlen is the size passed to alloc_skb.
"extra" is the extra space made available in __alloc_skb because of
rounding up by kmalloc. We can reorder the representation like so:

[__hlen__|__data____________|__extra__|__tlen___]
^                                               ^
head                                            skb_end_offset

The maximum space available for ip headers and payload without
fragmentation is min(mtu, data + extra). Therefore,
reserved_tailroom
= data + extra + tlen - min(mtu, data + extra)
= skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen)
= skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen)

Compare the second line to the current expression:
reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset)
and we can see that hlen and tlen are not taken into account.

The min() in the third line can be expanded into:
if mtu < skb_tailroom - tlen:
reserved_tailroom = skb_tailroom - mtu
else:
reserved_tailroom = tlen

Depending on hlen, tlen, mtu and the number of multicast address records,
the current code may output skbs that have less tailroom than
dev->needed_tailroom or it may output more skbs than needed because not all
space available is used.

Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: lack the check for ports in sctp_v6_cmp_addr

[ Upstream commit 40b4f0fd74e46c017814618d67ec9127ff20f157 ]

As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check
the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by
sctp_cmp_addr_exact().

Now sctp_v6_cmp_addr just check the port when two addresses have different
family, and lack the port check for two ipv6 addresses. that will make
sctp_hash_cmp() cannot work well.

so fix it by adding ports comparison in sctp_v6_cmp_addr().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix bridge multicast packet checksum validation

[ Upstream commit 9b368814b336b0a1a479135eb2815edbc00efd3c ]

We need to update the skb->csum after pulling the skb, otherwise
an unnecessary checksum (re)computation can ocure for IGMP/MLD packets
in the bridge code. Additionally this fixes the following splats for
network devices / bridge ports with support for and enabled RX checksum
offloading:

[...]
[   43.986968] eth0: hw csum failure
[   43.990344] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.0 #2
[   43.996193] Hardware name: BCM2709
[   43.999647] [<800204e0>] (unwind_backtrace) from [<8001cf14>] (show_stack+0x10/0x14)
[   44.007432] [<8001cf14>] (show_stack) from [<801ab614>] (dump_stack+0x80/0x90)
[   44.014695] [<801ab614>] (dump_stack) from [<802e4548>] (__skb_checksum_complete+0x6c/0xac)
[   44.023090] [<802e4548>] (__skb_checksum_complete) from [<803a055c>] (ipv6_mc_validate_checksum+0x104/0x178)
[   44.032959] [<803a055c>] (ipv6_mc_validate_checksum) from [<802e111c>] (skb_checksum_trimmed+0x130/0x188)
[   44.042565] [<802e111c>] (skb_checksum_trimmed) from [<803a06e8>] (ipv6_mc_check_mld+0x118/0x338)
[   44.051501] [<803a06e8>] (ipv6_mc_check_mld) from [<803b2c98>] (br_multicast_rcv+0x5dc/0xd00)
[   44.060077] [<803b2c98>] (br_multicast_rcv) from [<803aa510>] (br_handle_frame_finish+0xac/0x51c)
[...]

Fixes: 9afd85c9e455 ("net: Export IGMP/MLD message validation code")
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: clear IFF_TX_SKB_SHARING

[ Upstream commit a4690afeb0d2d7ba4d60dfa98a89f3bb1ce60ecd ]

ether_setup sets IFF_TX_SKB_SHARING but this is not supported by
qca_spi as it modifies the skb on xmit.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000)
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Don't clear IFF_BROADCAST

[ Upstream commit 2b70bad23c89b121a3e4a00f8968d14ebb78887d ]

Currently qcaspi_netdev_setup accidentally clears IFF_BROADCAST.
So fix this by keeping the flags from ether_setup.

Reported-by: Michael Heimpold <michael.heimpold@i2se.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000)
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: vrf: Remove direct access to skb->data

[ Upstream commit 65c38aa653c14df49e19faad74bd375f36e61c57 ]

Nik pointed that the VRF driver should be using skb_header_pointer
instead of accessing skb->data and bits beyond directly which can
be garbage.

Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: jme: fix suspend/resume on JMC260

[ Upstream commit ee50c130c82175eaa0820c96b6d3763928af2241 ]

The JMC260 network card fails to suspend/resume because the call to
jme_start_irq() was too early, moving the call to jme_start_irq() after
the call to jme_reset_link() makes it work.

Prior this change suspend/resume would fail unless /sys/power/pm_async=0
was explicitly specified.

Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: only create late gso-skb if skb is already set up with CHECKSUM_PARTIAL

[ Upstream commit a8c4a2522a0808c5c2143612909717d1115c40cf ]

Otherwise we break the contract with GSO to only pass CHECKSUM_PARTIAL
skbs down. This can easily happen with UDP+IPv4 sockets with the first
MSG_MORE write smaller than the MTU, second write is a sendfile.

Returning -EOPNOTSUPP lets the callers fall back into normal sendmsg path,
were we calculate the checksum manually during copying.

Commit d749c9cbffd6 ("ipv4: no CHECKSUM_PARTIAL on MSG_MORE corked
sockets") started to exposes this bug.

Fixes: d749c9cbffd6 ("ipv4: no CHECKSUM_PARTIAL on MSG_MORE corked sockets")
Reported-by: Jiri Benc <jbenc@redhat.com>
Cc: Jiri Benc <jbenc@redhat.com>
Reported-by: Wakko Warner <wakko@animx.eu.org>
Cc: Wakko Warner <wakko@animx.eu.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tunnel: Clear IPCB(skb)->opt before dst_link_failure called

[ Upstream commit 5146d1f151122e868e594c7b45115d64825aee5f ]

IPCB may contain data from previous layers (in the observed case the
qdisc layer). In the observed scenario, the data was misinterpreted as
ip header options, which later caused the ihl to be set to an invalid
value (<5). This resulted in an infinite loop in the mips implementation
of ip_fast_csum.

This patch clears IPCB(skb)->opt before dst_link_failure can be called for
various types of tunnels. This change only applies to encapsulated ipv4
packets.

The code introduced in 11c21a30 which clears all of IPCB has been removed
to be consistent with these changes, and instead the opt field is cleared
unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to
SIT, GRE, and IPIP tunnels.

The relevant vti, l2tp, and pptp functions already contain similar code for
clearing the IPCB.

Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: convert cached rtt from usec to jiffies when feeding initial rto

[ Upstream commit 9bdfb3b79e61c60e1a3e2dc05ad164528afa6b8a ]

Currently it's converted into msecs, thus HZ=1000 intact.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 740b0f1841f6 ("tcp: switch rtt estimations to usec resolution")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/events: Mask a moving irq

commit ff1e22e7a638a0782f54f81a6c9cb139aca2da35 upstream.

Moving an unmasked irq may result in irq handler being invoked on both
source and target CPUs.

With 2-level this can happen as follows:

On source CPU:
        evtchn_2l_handle_events() ->
            generic_handle_irq() ->
                handle_edge_irq() ->
                   eoi_pirq():
                       irq_move_irq(data);

                       /***** WE ARE HERE *****/

                       if (VALID_EVTCHN(evtchn))
                           clear_evtchn(evtchn);

If at this moment target processor is handling an unrelated event in
evtchn_2l_handle_events()'s loop it may pick up our event since target's
cpu_evtchn_mask claims that this event belongs to it *and* the event is
unmasked and still pending. At the same time, source CPU will continue
executing its own handle_edge_irq().

With FIFO interrupt the scenario is similar: irq_move_irq() may result
in a EVTCHNOP_unmask hypercall which, in turn, may make the event
pending on the target CPU.

We can avoid this situation by moving and clearing the event while
keeping event masked.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gmc: use proper register for vram type on Fiji

commit b634de4f446c062a0c95ec4d150b4cf7c85e3526 upstream.

The offset changed on Fiji.

Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gmc: move vram type fetching into sw_init

commit d1518a1db31a25682ea09c4b135fa72d9883be42 upstream.

early_init gets called before atom asic init so on non-posted
cards, the vram type is not initialized.

Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: add a dpm quirk for all R7 370 parts

commit 0e5585dc870af947fab2af96a88c2d8b4270247c upstream.

Higher mclk values are not stable due to a bug somewhere.
Limit them for now.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: add another R7 370 quirk

commit a64663d9870364bd2a2df62bf0d3a9fbe5ea62a8 upstream.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=115291

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5

commit f971f2263deaa4a441e377b385c11aee0f3b3f9a upstream.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94692

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/udl: Use unlocked gem unreferencing

commit 72b9ff0612ad8fc969b910cd00ac16b57a1a9ba4 upstream.

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp: move hw_mutex up the call stack

commit 7779c5e23c5132c22a219f1f5554ef81dd15ee91 upstream.

1) don't let other threads trying to bang on aux channel interrupt the
defer timeout/logic
2) don't let other threads interrupt the i2c over aux logic

Technically, according to people who actually have the DP spec, this
should not be required.  In practice, it makes some troublesome Dell
monitor (and perhaps others) work, so probably a case of "It's compliant
if it works with windows" on the hw vendor's part..

v2: rebased to come before DPCD/AUX logging patch for easier backport
to stable branches.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: opcodes.h: Add arm big-endian config options before including arm header

commit a6002ec5a8c68e69706b2efd6db6d682d0ab672c upstream.

arm and arm64 use different config options to specify big endian. This
needs taking into account when including code/headers between the two
architectures.

A case in point is PAN, which uses the __instr_arm() macro to output
instructions. The macro comes from opcodes.h, which lives under arch/arm.
On a big-endian build the mismatched config options mean the instruction
isn't byte swapped correctly, resulting in undefined instruction exceptions
during boot:

| alternatives: patching kernel code
| kdevtmpfs[87]: undefined instruction: pc=ffffffc0004505b4
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c
| Internal error: Oops - undefined instruction: 0 [#1] SMP
| Modules linked in:
| CPU: 0 PID: 87 Comm: kdevtmpfs Not tainted 4.1.16+ #5
| Hardware name: Hisilicon PhosphorHi1382 EVB (DT)
| task: ffffffc336591700 ti: ffffffc3365a4000 task.ti: ffffffc3365a4000
| PC is at dump_instr+0x68/0x100
| LR is at do_undefinstr+0x1d4/0x2a4
| pc : [<ffffffc00076231c>] lr : [<ffffffc0000811d4>] pstate: 604001c5
| sp : ffffffc3365a6450

Reported-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Xuefeng Wang <wxf.wang@hisilicon.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler-gcc: disable -ftracer for __noclone functions

commit 95272c29378ee7dc15f43fa2758cb28a5913a06d upstream.

-ftracer can duplicate asm blocks causing compilation to fail in
noclone functions.  For example, KVM declares a global variable
in an asm like

    asm("2: ... \n
         .pushsection data \n
         .global vmx_return \n
         vmx_return: .long 2b");

and -ftracer causes a double declaration.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: kvm@vger.kernel.org
Reported-by: Linda Walsh <lkml@tlinx.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm, pfn: fix uuid validation

commit e5670563f588ed1c0603819350c0f02cec23f5c5 upstream.

If we detect a namespace has a stale info block in the init path, we
should overwrite with the latest configuration.  In fact, we already
return -ENODEV when the parent uuid is invalid, the same should be done
for the 'self' uuid.  Otherwise we can get into a condition where
userspace is unable to reconfigure the pfn-device without directly /
manually invalidating the info block.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libnvdimm: fix smart data retrieval

commit 211291126698c8f047617565b2e2e7f822f86354 upstream.

It appears that smart data retrieval has been broken the since the
initial implementation.  Fix the payload size to be 128-bytes per the
specification.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fixup preempt underflow with huge pages

commit 08a5bb2921e490939f78f38fd0d02858bb709942 upstream.

hugepd_free() used __get_cpu_var() once. Nothing ensured that the code
accessing the variable did not migrate from one CPU to another and soon
this was noticed by Tiejun Chen in 94b09d755462 ("powerpc/hugetlb:
Replace __get_cpu_var with get_cpu_var"). So we had it fixed.

Christoph Lameter was doing his __get_cpu_var() replaces and forgot
PowerPC. Then he noticed this and sent his fixed up batch again which
got applied as 69111bac42f5 ("powerpc: Replace __get_cpu_var uses").

The careful reader will noticed one little detail: get_cpu_var() got
replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does
a preempt_enable() and nothing that does preempt_disable() so we
underflow the preempt counter.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix invalid node in alloc_migrate_target()

commit 6f25a14a7053b69917e2ebea0d31dd444cd31fd5 upstream.

It is incorrect to use next_node to find a target node, it will return
MAX_NUMNODES or invalid node.  This will lead to crash in buddy system
allocation.

Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Laura Abbott" <lauraa@codeaurora.org>
Cc: Hui Zhu <zhuhui@xiaomi.com>
Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Apply fix for white noise on Asus N550JV, too

commit 83a9efb5b8170b7cffef4f62656656e1d8ad2ccd upstream.

Apply the new fixup that is used for ASUS N750JV to another similar
model, N500JV, too, for reducing the headphone noise.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix white noise on Asus N750JV headphone

commit 9d4dc5840f93bcb002fa311693349deae7702bc5 upstream.

For reducing the noise from the headphone output on ASUS N750JV,
call the existing fixup, alc_fixup_auto_mute_via_amp(), additionally.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Asus N750JV external subwoofer fixup

commit 70cf2cbd685e218c3ffd105d9fb6cf0f8d767481 upstream.

ASUS N750JV needs the same fixup as N550 for enabling its subwoofer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115181
Signed-off-by: Bobi Mihalca <bobbymihalca@touchtech.ro>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Use mod_timer() for rearming the system timer

commit 4a07083ed613644c96c34a7dd2853dc5d7c70902 upstream.

ALSA system timer backend stops the timer via del_timer() without sync
and leaves del_timer_sync() at the close instead.  This is because of
the restriction by the design of ALSA timer: namely, the stop callback
may be called from the timer handler, and calling the sync shall lead
to a hangup.  However, this also triggers a kernel BUG() when the
timer is rearmed immediately after stopping without sync:
 kernel BUG at kernel/time/timer.c:966!
 Call Trace:
  <IRQ>
  [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0
  [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0
  [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290
  [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120
  [<ffffffff81296b72>] call_timer_fn+0x162/0x520
  [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520
  [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0
  ....

It's the place where add_timer() checks the pending timer.  It's clear
that this may happen after the immediate restart without sync in our
cases.

So, the workaround here is just to use mod_timer() instead of
add_timer().  This looks like a band-aid fix, but it's a right move,
as snd_timer_interrupt() takes care of the continuous rearm of timer.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Unbreak handling exceptions from kernel modules

commit 2ef4dfd9d9f288943e249b78365a69e3ea3ec072 upstream.

Handling exceptions from modules never worked on parisc.
It was just masked by the fact that exceptions from modules
don't happen during normal use.

When a module triggers an exception in get_user() we need to load the
main kernel dp value before accessing the exception_data structure, and
afterwards restore the original dp value of the module on exit.

Noticed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix kernel crash with reversed copy_from_user()

commit ef72f3110d8b19f4c098a0bff7ed7d11945e70c6 upstream.

The kernel module testcase (lib/test_user_copy.c) exhibited a kernel
crash on parisc if the parameters for copy_from_user were reversed
("illegal reversed copy_to_user" testcase).

Fix this potential crash by checking the fault handler if the faulting
address is in the exception table.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Avoid function pointers for kernel exception routines

commit e3893027a300927049efc1572f852201eb785142 upstream.

We want to avoid the kernel module loader to create function pointers
for the kernel fixup routines of get_user() and put_user(). Changing
the external reference from function type to int type fixes this.

This unbreaks exception handling for get_user() and put_user() when
called from a kernel module.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument

commit e54358915d0a00399c11c2c23ae1be674cba188a upstream.

Despite what the DocBook comment to pkcs7_validate_trust() says, the
*_trusted argument is never set to false.

pkcs7_validate_trust() only positively sets *_trusted upon encountering
a trusted PKCS#7 SignedInfo block.

This is quite unfortunate since its callers, system_verify_data() for
example, depend on pkcs7_validate_trust() clearing *_trusted on non-trust.

Indeed, UBSAN splats when attempting to load the uninitialized local
variable 'trusted' from system_verify_data() in pkcs7_validate_trust():

  UBSAN: Undefined behaviour in crypto/asymmetric_keys/pkcs7_trust.c:194:14
  load of value 82 is not a valid value for type '_Bool'
  [...]
  Call Trace:
    [<ffffffff818c4d35>] dump_stack+0xbc/0x117
    [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
    [<ffffffff8194113b>] ubsan_epilogue+0xd/0x4e
    [<ffffffff819419fa>] __ubsan_handle_load_invalid_value+0x111/0x158
    [<ffffffff819418e9>] ? val_to_string.constprop.12+0xcf/0xcf
    [<ffffffff818334a4>] ? x509_request_asymmetric_key+0x114/0x370
    [<ffffffff814b83f0>] ? kfree+0x220/0x370
    [<ffffffff818312c2>] ? public_key_verify_signature_2+0x32/0x50
    [<ffffffff81835e04>] pkcs7_validate_trust+0x524/0x5f0
    [<ffffffff813c391a>] system_verify_data+0xca/0x170
    [<ffffffff813c3850>] ? top_trace_array+0x9b/0x9b
    [<ffffffff81510b29>] ? __vfs_read+0x279/0x3d0
    [<ffffffff8129372f>] mod_verify_sig+0x1ff/0x290
    [...]

The implication is that pkcs7_validate_trust() effectively grants trust
when it really shouldn't have.

Fix this by explicitly setting *_trusted to false at the very beginning
of pkcs7_validate_trust().

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated

commit 3c2e2266a5bd2d1cef258e6e54dca1d99946379f upstream.

arm:pxa_defconfig can result in the following crash if the max1111 driver
is not instantiated.

Unhandled fault: page domain fault (0x01b) at 0x00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: : 1b [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10
Hardware name: SHARP Akita
Workqueue: events sharpsl_charge_toggle
task: c390a000 ti: c391e000 task.ti: c391e000
PC is at max1111_read_channel+0x20/0x30
LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c
pc : [<c03aaab0>]    lr : [<c0024b50>]    psr: 20000013
...
[<c03aaab0>] (max1111_read_channel) from [<c0024b50>]
(sharpsl_pm_pxa_read_max1111+0x2c/0x3c)
[<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>]
(spitzpm_read_devdata+0x5c/0xc4)
[<c00262e0>] (spitzpm_read_devdata) from [<c0024094>]
(sharpsl_check_battery_temp+0x78/0x110)
[<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>]
(sharpsl_charge_toggle+0x48/0x110)
[<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>]
(process_one_work+0x14c/0x48c)
[<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4)
[<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec)
[<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24)

This can occur because the SPI controller driver (SPI_PXA2XX) is built as
module and thus not necessarily loaded. While building SPI_PXA2XX into the
kernel would make the problem disappear, it appears prudent to ensure that
the driver is instantiated before accessing its data structures.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.7

perf/x86/intel: Fix PEBS data source interpretation on Nehalem/Westmere

commit e17dc65328057c00db7e1bfea249c8771a78b30b upstream.

Jiri reported some time ago that some entries in the PEBS data source table
in perf do not agree with the SDM. We investigated and the bits
changed for Sandy Bridge, but the SDM was not updated.

perf already implements the bits correctly for Sandy Bridge
and later. This patch patches it up for Nehalem and Westmere.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1456871124-15985-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Use PAGE_SIZE for PEBS buffer size on Core2

commit e72daf3f4d764c47fb71c9bdc7f9c54a503825b1 upstream.

Using PAGE_SIZE buffers makes the WRMSR to PERF_GLOBAL_CTRL in
intel_pmu_enable_all() mysteriously hang on Core2. As a workaround, we
don't do this.

The hard lockup is easily triggered by running 'perf test attr'
repeatedly. Most of the time it gets stuck on sample session with
small periods.

  # perf test attr -vv
  14: struct perf_event_attr setup                             :
  --- start ---
  ...
    'PERF_TEST_ATTR=/tmp/tmpuEKz3B /usr/bin/perf record -o /tmp/tmpuEKz3B/perf.data -c 123 kill >/dev/null 2>&1' ret 1

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160301190352.GA8355@krava.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Fix PEBS warning by only restoring active PMU in pmi

commit c3d266c8a9838cc141b69548bc3b1b18808ae8c4 upstream.

This patch tries to fix a PEBS warning found in my stress test. The
following perf command can easily trigger the pebs warning or spurious
NMI error on Skylake/Broadwell/Haswell platforms:

  sudo perf record -e 'cpu/umask=0x04,event=0xc4/pp,cycles,branches,ref-cycles,cache-misses,cache-references' --call-graph fp -b -c1000 -a

Also the NMI watchdog must be enabled.

For this case, the events number is larger than counter number. So
perf has to do multiplexing.

In perf_mux_hrtimer_handler, it does perf_pmu_disable(), schedule out
old events, rotate_ctx, schedule in new events and finally
perf_pmu_enable().

If the old events include precise event, the MSR_IA32_PEBS_ENABLE
should be cleared when perf_pmu_disable().  The MSR_IA32_PEBS_ENABLE
should keep 0 until the perf_pmu_enable() is called and the new event is
precise event.

However, there is a corner case which could restore PEBS_ENABLE to
stale value during the above period. In perf_pmu_disable(), GLOBAL_CTRL
will be set to 0 to stop overflow and followed PMI. But there may be
pending PMI from an earlier overflow, which cannot be stopped. So even
GLOBAL_CTRL is cleared, the kernel still be possible to get PMI. At
the end of the PMI handler, __intel_pmu_enable_all() will be called,
which will restore the stale values if old events haven't scheduled
out.

Once the stale pebs value is set, it's impossible to be corrected if
the new events are non-precise. Because the pebs_enabled will be set
to 0. x86_pmu.enable_all() will ignore the MSR_IA32_PEBS_ENABLE
setting. As a result, the following NMI with stale PEBS_ENABLE
trigger pebs warning.

The pending PMI after enabled=0 will become harmless if the NMI handler
does not change the state. This patch checks cpuc->enabled in pmi and
only restore the state when PMU is active.

Here is the dump:

  Call Trace:
   <NMI>  [<ffffffff813c3a2e>] dump_stack+0x63/0x85
   [<ffffffff810a46f2>] warn_slowpath_common+0x82/0xc0
   [<ffffffff810a483a>] warn_slowpath_null+0x1a/0x20
   [<ffffffff8100fe2e>] intel_pmu_drain_pebs_nhm+0x2be/0x320
   [<ffffffff8100caa9>] intel_pmu_handle_irq+0x279/0x460
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   [<ffffffff811f290d>] ? vunmap_page_range+0x20d/0x330
   [<ffffffff811f2f11>] ?  unmap_kernel_range_noflush+0x11/0x20
   [<ffffffff8148379f>] ? ghes_copy_tofrom_phys+0x10f/0x2a0
   [<ffffffff814839c8>] ? ghes_read_estatus+0x98/0x170
   [<ffffffff81005a7d>] perf_event_nmi_handler+0x2d/0x50
   [<ffffffff810310b9>] nmi_handle+0x69/0x120
   [<ffffffff810316f6>] default_do_nmi+0xe6/0x100
   [<ffffffff810317f2>] do_nmi+0xe2/0x130
   [<ffffffff817aea71>] end_repeat_nmi+0x1a/0x1e
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   [<ffffffff810639b6>] ? native_write_msr_safe+0x6/0x40
   <<EOE>>  <IRQ>  [<ffffffff81006df8>] ?  x86_perf_event_set_period+0xd8/0x180
   [<ffffffff81006eec>] x86_pmu_start+0x4c/0x100
   [<ffffffff8100722d>] x86_pmu_enable+0x28d/0x300
   [<ffffffff811994d7>] perf_pmu_enable.part.81+0x7/0x10
   [<ffffffff8119cb70>] perf_mux_hrtimer_handler+0x200/0x280
   [<ffffffff8119c970>] ?  __perf_install_in_context+0xc0/0xc0
   [<ffffffff8110f92d>] __hrtimer_run_queues+0xfd/0x280
   [<ffffffff811100d8>] hrtimer_interrupt+0xa8/0x190
   [<ffffffff81199080>] ?  __perf_read_group_add.part.61+0x1a0/0x1a0
   [<ffffffff81051bd8>] local_apic_timer_interrupt+0x38/0x60
   [<ffffffff817af01d>] smp_apic_timer_interrupt+0x3d/0x50
   [<ffffffff817ad15c>] apic_timer_interrupt+0x8c/0xa0
   <EOI>  [<ffffffff81199080>] ?  __perf_read_group_add.part.61+0x1a0/0x1a0
   [<ffffffff81123de5>] ?  smp_call_function_single+0xd5/0x130
   [<ffffffff81123ddb>] ?  smp_call_function_single+0xcb/0x130
   [<ffffffff81199080>] ?  __perf_read_group_add.part.61+0x1a0/0x1a0
   [<ffffffff8119765a>] event_function_call+0x10a/0x120
   [<ffffffff8119c660>] ? ctx_resched+0x90/0x90
   [<ffffffff811971e0>] ? cpu_clock_event_read+0x30/0x30
   [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60
   [<ffffffff8119772b>] _perf_event_enable+0x5b/0x70
   [<ffffffff81197388>] perf_event_for_each_child+0x38/0xa0
   [<ffffffff811976d0>] ? _perf_event_disable+0x60/0x60
   [<ffffffff811a0ffd>] perf_ioctl+0x12d/0x3c0
   [<ffffffff8134d855>] ? selinux_file_ioctl+0x95/0x1e0
   [<ffffffff8124a3a1>] do_vfs_ioctl+0xa1/0x5a0
   [<ffffffff81036d29>] ? sched_clock+0x9/0x10
   [<ffffffff8124a919>] SyS_ioctl+0x79/0x90
   [<ffffffff817ac4b2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
  ---[ end trace aef202839fe9a71d ]---
  Uhhuh. NMI received for unknown reason 2d on CPU 2.
  Do you have a strange power saving mode enabled?

Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1457046448-6184-1-git-send-email-kan.liang@intel.com
[ Fixed various typos and other small details. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/pebs: Add workaround for broken OVFL status on HSW+

commit 8077eca079a212f26419c57226f28696b7100683 upstream.

This patch fixes an issue with the GLOBAL_OVERFLOW_STATUS bits on
Haswell, Broadwell and Skylake processors when using PEBS.

The SDM stipulates that when the PEBS iterrupt threshold is crossed,
an interrupt is posted and the kernel is interrupted. The kernel will
find GLOBAL_OVF_SATUS bit 62 set indicating there are PEBS records to
drain. But the bits corresponding to the actual counters should NOT be
set. The kernel follows the SDM and assumes that all PEBS events are
processed in the drain_pebs() callback. The kernel then checks for
remaining overflows on any other (non-PEBS) events and processes these
in the for_each_bit_set(&status) loop.

As it turns out, under certain conditions on HSW and later processors,
on PEBS buffer interrupt, bit 62 is set but the counter bits may be
set as well. In that case, the kernel drains PEBS and generates
SAMPLES with the EXACT tag, then it processes the counter bits, and
generates normal (non-EXACT) SAMPLES.

I ran into this problem by trying to understand why on HSW sampling on
a PEBS event was sometimes returning SAMPLES without the EXACT tag.
This should not happen on user level code because HSW has the
eventing_ip which always point to the instruction that caused the
event.

The workaround in this patch simply ensures that the bits for the
counters used for PEBS events are cleared after the PEBS buffer has
been drained. With this fix 100% of the PEBS samples on my user code
report the EXACT tag.

Before:
  $ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase
  $ perf report -D | fgrep SAMPLES
  PERF_RECORD_SAMPLE(IP, 0x2): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y
                           \--- EXACT tag is missing

After:
  $ perf record -e cpu/event=0xd0,umask=0x81/upp ./multichase
  $ perf report -D | fgrep SAMPLES
  PERF_RECORD_SAMPLE(IP, 0x4002): 11775/11775: 0x406de5 period: 73469 addr: 0 exact=Y
                           \--- EXACT tag is set

The problem tends to appear more often when multiple PEBS events are used.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1457034642-21837-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/cputime: Fix steal time accounting vs. CPU hotplug

commit e9532e69b8d1d1284e8ecf8d2586de34aec61244 upstream.

On CPU hotplug the steal time accounting can keep a stale rq->prev_steal_time
value over CPU down and up. So after the CPU comes up again the delta
calculation in steal_account_process_tick() wreckages itself due to the
unsigned math:

 u64 steal = paravirt_steal_clock(smp_processor_id());

 steal -= this_rq()->prev_steal_time;

So if steal is smaller than rq->prev_steal_time we end up with an insane large
value which then gets added to rq->prev_steal_time, resulting in a permanent
wreckage of the accounting. As a consequence the per CPU stats in /proc/stat
become stale.

Nice trick to tell the world how idle the system is (100%) while the CPU is
100% busy running tasks. Though we prefer realistic numbers.

None of the accounting values which use a previous value to account for
fractions is reset at CPU hotplug time. update_rq_clock_task() has a sanity
check for prev_irq_time and prev_steal_time_rq, but that sanity check solely
deals with clock warps and limits the /proc/stat visible wreckage. The
prev_time values are still wrong.

Solution is simple: Reset rq->prev_*_time when the CPU is plugged in again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: commit 095c0aa83e52 "sched: adjust scheduler cpu power for stolen time"
Fixes: commit aa483808516c "sched: Remove irq time from available CPU power"
Fixes: commit e6e6685accfa "KVM guest: Steal time accounting"
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603041539490.3686@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi_common: do not clobber fixed sense information

commit ba08311647892cc7912de74525fd78416caf544a upstream.

For fixed sense the information field is 32 bits, to we need to truncate
the information field to avoid clobbering the sense code.

Fixes: a1524f226a02 ("libata-eh: Set 'information' field for autosense")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / sleep: Clear pm_suspend_global_flags upon hibernate

commit 276142730c39c9839465a36a90e5674a8c34e839 upstream.

When suspending to RAM, waking up and later suspending to disk,
we gratuitously runtime resume devices after the thaw phase.
This does not occur if we always suspend to RAM or always to disk.

pm_complete_with_resume_check(), which gets called from
pci_pm_complete() among others, schedules a runtime resume
if PM_SUSPEND_FLAG_FW_RESUME is set. The flag is set during
a suspend-to-RAM cycle. It is cleared at the beginning of
the suspend-to-RAM cycle but not afterwards and it is not
cleared during a suspend-to-disk cycle at all. Fix it.

Fixes: ef25ba047601 (PM / sleep: Add flags to indicate platform firmware involvement)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled

commit d70e28f57e14a481977436695b0c9ba165472431 upstream.

Some SKL-H configurations require "intel_idle.max_cstate=7" to boot.
While that is an effective workaround, it disables C10.

This patch detects the problematic configuration,
and disables C8 and C9, keeping C10 enabled.

Note that enabling SGX in BIOS SETUP can also prevent this issue,
if the system BIOS provides that option.

https://bugzilla.kernel.org/show_bug.cgi?id=109081
"Freezes with Intel i7 6700HQ (Skylake), unless intel_idle.max_cstate=7"

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: onenand: fix deadlock in onenand_block_markbad

commit 5e64c29e98bfbba1b527b0a164f9493f3db9e8cb upstream.

Commit 5942ddbc500d ("mtd: introduce mtd_block_markbad interface")
incorrectly changed onenand_block_markbad() to call mtd_block_markbad
instead of onenand_chip's block_markbad function. As a result the function
will now recurse and deadlock. Fix by reverting the change.

Fixes: 5942ddbc500d ("mtd: introduce mtd_block_markbad interface")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>