arm64: KVM: Implement 32bit system register save/restore

Implement the 32bit system register save/restore as a direct
translation of the assembly code version.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit c209ec85a2a7d2fd38bca0a44b7e70abd079c178)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: KVM: Implement system register save/restore

Implement the system register save/restore as a direct translation of
the assembly code version.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
(cherry picked from commit 6d6ec20fcf2830ca10c1b7c8efd7e2592c40e3d6)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: KVM: Implement timer save/restore

Implement the timer save restore as a direct translation of
the assembly code version.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 1431af367e52b08038e78d346822966d968f1694)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
arch/arm64/kvm/hyp/Makefile
arch/arm64/kvm/hyp/hyp.h

arm64: KVM: Implement vgic-v2 save/restore

Implement the vgic-v2 save restore (mostly) as a direct translation
of the assembly code version.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 06282fd2c2bf61619649a2b13e4a08556598a64c)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: KVM: Add a HYP-specific header file

In order to expose the various EL2 services that are private to
the hypervisor, add a new hyp.h file.

So far, it only contains mundane things such as section annotation
and VA manipulation.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit c76a0a6695c61088c8d2e731e25305502666bf7d)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

KVM: arm/arm64: vgic-v3: Make the LR indexing macro public

We store GICv3 LRs in reverse order so that the CPU can save/restore
them in rever order as well (don't ask why, the design is crazy),
and yet generate memory traffic that doesn't completely suck.

We need this macro to be available to the C version of save/restore.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 3c13b8f435acb452eac62d966148a8b6fa92151f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Add macros to read/write system registers

Rather than crafting custom macros for reading/writing each system
register provide generics accessors, read_sysreg and write_sysreg, for
this purpose.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 3600c2fdc09a43a30909743569e35a29121602ed)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Use PoU cache instr for I/D coherency

In systems with three levels of cache(PoU at L1 and PoC at L3),
PoC cache flush instructions flushes L2 and L3 caches which could affect
performance.
For cache flushes for I and D coherency, PoU should suffice.
So changing all I and D coherency related cache flushes to PoU.

Introduced a new __clean_dcache_area_pou API for dcache flush till PoU
and provided a common macro for __flush_dcache_area and
__clean_dcache_area_pou.

Also, now in __sync_icache_dcache, icache invalidation for non-aliasing
VIPT icache is done only for that particular page instead of the earlier
__flush_icache_all.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 0a28714c53fd4f7aea709be7577dfbe0095c8c3e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
arch/arm64/mm/proc-macros.S

arm64: mm: add code to safely replace TTBR1_EL1

If page tables are modified without suitable TLB maintenance, the ARM
architecture permits multiple TLB entries to be allocated for the same
VA. When this occurs, it is permitted that TLB conflict aborts are
raised in response to synchronous data/instruction accesses, and/or and
amalgamation of the TLB entries may be used as a result of a TLB lookup.

The presence of conflicting TLB entries may result in a variety of
behaviours detrimental to the system (e.g. erroneous physical addresses
may be used by I-cache fetches and/or page table walks). Some of these
cases may result in unexpected changes of hardware state, and/or result
in the (asynchronous) delivery of SError.

To avoid these issues, we must avoid situations where conflicting
entries may be allocated into TLBs. For user and module mappings we can
follow a strict break-before-make approach, but this cannot work for
modifications to the swapper page tables that cover the kernel text and
data.

Instead, this patch adds code which is intended to be executed from the
idmap, which can safely unmap the swapper page tables as it only
requires the idmap to be active. This enables us to uninstall the active
TTBR1_EL1 entry, invalidate TLBs, then install a new TTBR1_EL1 entry
without potentially unmapping code or data required for the sequence.
This avoids the risk of conflict, but requires that updates are staged
in a copy of the swapper page tables prior to being installed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 50e1881ddde2a986c7d0d2150985239e5e3d7d96)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: place __cpu_setup in .text

We drop __cpu_setup in .text.init, which ends up being part of .text.
The .text.init section was a legacy section name which has been unused
elsewhere for a long time.

The ".text.init" name is misleading if read as a synonym for
".init.text". Any CPU may execute __cpu_setup before turning the MMU on,
so it should simply live in .text.

Remove the pointless section assignment. This will leave __cpu_setup in
the .text section.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit f00083cae331e5d3eecade6b4fdc35d0825e73ef)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: add function to install the idmap

In some cases (e.g. when making invasive changes to the kernel page
tables) we will need to execute code from the idmap.

Add a new helper which may be used to install the idmap, complementing
the existing cpu_uninstall_idmap.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 609116d202a8c5fd3fe393eb85373cbee906df68)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: unmap idmap earlier

During boot we leave the idmap in place until paging_init, as we
previously had to wait for the zero page to become allocated and
accessible.

Now that we have a statically-allocated zero page, we can uninstall the
idmap much earlier in the boot process, making it far easier to spot
accidental use of physical addresses. This also brings the cold boot
path in line with the secondary boot path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 86ccce896cb0aa800a7a6dcd29b41ffc4eeb1a75)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: unify idmap removal

We currently open-code the removal of the idmap and restoration of the
current task's MMU state in a few places.

Before introducing yet more copies of this sequence, unify these to call
a new helper, cpu_uninstall_idmap.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 9e8e865bbe294a69666a1996bda3e87825b258c0)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: place empty_zero_page in bss

Currently the zero page is set up in paging_init, and thus we cannot use
the zero page earlier. We use the zero page as a reserved TTBR value
from which no TLB entries may be allocated (e.g. when uninstalling the
idmap). To enable such usage earlier (as may be required for invasive
changes to the kernel page tables), and to minimise the time that the
idmap is active, we need to be able to use the zero page before
paging_init.

This patch follows the example set by x86, by allocating the zero page
at compile time, in .bss. This means that the zero page itself is
available immediately upon entry to start_kernel (as we zero .bss before
this), and also means that the zero page takes up no space in the raw
Image binary. The associated struct page is allocated in bootmem_init,
and remains unavailable until this time.

Outside of arch code, the only users of empty_zero_page assume that the
empty_zero_page symbol refers to the zeroed memory itself, and that
ZERO_PAGE(x) must be used to acquire the associated struct page,
following the example of x86. This patch also brings arm64 inline with
these assumptions.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 5227cfa71f9e8574373f4d0e9e754942d76cdf67)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: head.S: use memset to clear BSS

Currently we use an open-coded memzero to clear the BSS. As it is a
trivial implementation, it is sub-optimal.

Our optimised memset doesn't use the stack, is position-independent, and
for the memzero case can use of DC ZVA to clear large blocks
efficiently. In __mmap_switched the MMU is on and there are no live
caller-saved registers, so we can safely call an uninstrumented memset.

This patch changes __mmap_switched to use memset when clearing the BSS.
We use the __pi_memset alias so as to avoid any instrumentation in all
kernel configurations.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 2a803c4db615d85126c5c7afd5849a3cfde71422)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: specialise pagetable allocators

We pass a size parameter to early_alloc and late_alloc, but these are
only ever used to allocate single pages. In late_alloc we always
allocate a single page.

Both allocators provide us with zeroed pages (such that all entries are
invalid), but we have no barriers between allocating a page and adding
that page to existing (live) tables. A concurrent page table walk may
see stale data, leading to a number of issues.

This patch specialises the two allocators for page tables. The size
parameter is removed and the necessary dsb(ishst) is folded into each.
To make it clear that the functions are intended for use for page table
allocation, they are renamed to {early,late}_pgtable_alloc, with the
related function pointed renamed to pgtable_alloc.

As the dsb(ishst) is now in the allocator, the existing barrier for the
zero page is redundant and thus is removed. The previously missing
include of barrier.h is added.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 21ab99c289d350f4ae454bc069870009db6df20e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: remove pointless PAGE_MASKing

As pgd_offset{,_k} shift the input address by PGDIR_SHIFT, the sub-page
bits will always be shifted out. There is no need to apply PAGE_MASK
before this.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit e2c30ee320eb96304896c7ab84499e5bc5e5fb6e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

asm-generic: Fix local variable shadow in __set_fixmap_offset

Currently __set_fixmap_offset is a macro function which has a local
variable called 'addr'. If a caller passes a 'phys' parameter which is
derived from a variable also called 'addr', the local variable will
shadow this, and the compiler will complain about the use of an
uninitialized variable. To avoid the issue with namespace clashes,
'addr' is prefixed with a liberal sprinkling of underscores.

Turning __set_fixmap_offset into a static inline breaks the build for
several architectures. Fixing this properly requires updates to a number
of architectures to make them agree on the prototype of __set_fixmap (it
could be done as a subsequent patch series).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
[catalin.marinas@arm.com: squashed the original function patch and macro fixup]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 3694bd76781b76c4f8d2ecd85018feeb1609f0e5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: fold alternatives into .init

Currently we treat the alternatives separately from other data that's
only used during initialisation, using separate .altinstructions and
.altinstr_replacement linker sections. These are freed for general
allocation separately from .init*. This is problematic as:

* We do not remove execute permissions, as we do for .init, leaving the
  memory executable.

* We pad between them, making the kernel Image bianry up to PAGE_SIZE
  bytes larger than necessary.

This patch moves the two sections into the contiguous region used for
.init*. This saves some memory, ensures that we remove execute
permissions, and allows us to remove some code made redundant by this
reorganisation.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 9aa4ec1571da62366cfddc20f3b923609604fe63)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

ARM: 8511/1: ARM64: kernel: PSCI: move PSCI idle management code to drivers/firmware

ARM64 PSCI kernel interfaces that initialize idle states and implement
the suspend API to enter them are generic and can be shared with the
ARM architecture.

To achieve that goal, this patch moves ARM64 PSCI idle management
code to drivers/firmware, so that the interface to initialize and
enter idle states can actually be shared by ARM and ARM64 arches
back-ends.

The ARM generic CPUidle implementation also requires the definition of
a cpuidle_ops section entry for the kernel to initialize the CPUidle
operations at boot based on the enable-method (ie ARM64 has the
statically initialized cpu_ops counterparts for that purpose); therefore
this patch also adds the required section entry on CONFIG_ARM for PSCI so
that the kernel can initialize the PSCI CPUidle back-end when PSCI is
the probed enable-method.

On ARM64 this patch provides no functional change.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arch/arm64]
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 8b6f2499ac45d5a0ab2e4b6f9613ab3f60416be1)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

ARM: 8481/2: drivers: psci: replace psci firmware calls

Switch to use a generic interface for issuing SMC/HVC based on ARM SMC
Calling Convention. Removes now the now unused psci-call.S.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit e679660dbb8347f275fe5d83a5dd59c1fb6c8e63)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

ARM: 8480/2: arm64: add implementation for arm-smccc

Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 14457459f9ca2ff8521686168ea179edc3a56a44)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
arch/arm64/kernel/arm64ksyms.c

ARM: 8479/2: add implementation for arm-smccc

Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for
architectures that may support arm-smccc. It's the responsibility of the
caller to know if the SMC instruction is supported by the platform.

Reviewed-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit b329f95d70f3f955093e9a2b18ac1ed3587a8f73)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

ARM: 8478/2: arm/arm64: add arm-smccc

Adds helpers to do SMC and HVC based on ARM SMC Calling Convention.
CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the
SMC or HVC instruction. It's the responsibility of the caller to know if
the SMC instruction is supported by the platform.

This patch doesn't provide an implementation of the declared functions.
Later patches will bring in implementations and set
CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively.

Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 98dd64f34f47ce19b388d9015f767f48393a81eb)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

ARM: 8510/1: rework ARM_CPU_SUSPEND dependencies

The code enabled by the ARM_CPU_SUSPEND config option is used by
kernel subsystems for purposes that go beyond system suspend so its
config entry should be augmented to take more default options into
account and avoid forcing its selection to prevent dependencies
override.

To achieve this goal, this patch reworks the ARM_CPU_SUSPEND config
entry and updates its default config value (by adding the BL_SWITCHER
option to it) and its dependencies (ARCH_SUSPEND_POSSIBLE), so that the
symbol is still selected by default by the subsystems requiring it and
at the same time enforcing the dependencies correctly.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 1b9bdf5c1661873a10e193b8cbb803a87fe5c4a1)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

ARM: 8458/1: bL_switcher: add GIC dependency

It is not possible to build the bL_switcher code if the GIC
driver is disabled, because it relies on calling into some
gic specific interfaces, and that would result in this build
error:

arch/arm/common/built-in.o: In function `bL_switch_to':
:(.text+0x1230): undefined reference to `gic_get_sgir_physaddr'
:(.text+0x1244): undefined reference to `gic_send_sgi'
:(.text+0x1268): undefined reference to `gic_migrate_target'
arch/arm/common/built-in.o: In function `bL_switcher_enable.part.4':
:(.text.unlikely+0x2f8): undefined reference to `gic_get_cpu_id'

This adds a Kconfig dependency to ensure we only build the big-little
switcher if the GIC driver is present as well.

Almost all ARMv7 platforms come with a GIC anyway, but it is possible
to build a kernel that disables all platforms.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 6c044fecdf78be3fda159a5036bb33700cdd5e59)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Remove stack duplicating code from jprobes

commit ad05711cec12131e1277ce749a99d08ecf233aa7 upstream.

Because the arm64 calling standard allows stacked function arguments to be
anywhere in the stack frame, do not attempt to duplicate the stack frame for
jprobes handler functions.

Documentation changes to describe this issue have been broken out into a
separate patch in order to simultaneously address them in other
architecture(s).

Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: kprobes: Add KASAN instrumentation around stack accesses

commit f7e35c5ba4322838ce84b23a2f1a6d6b7f0b57ec upstream.

This patch disables KASAN around the memcpy from/to the kernel or IRQ
stacks to avoid warnings like below:

BUG: KASAN: stack-out-of-bounds in setjmp_pre_handler+0xe4/0x170 at addr ffff800935cbbbc0
Read of size 128 by task swapper/0/1
page:ffff7e0024d72ec0 count:0 mapcount:0 mapping:          (null) index:0x0
flags: 0x1000000000000000()
page dumped because: kasan: bad access detected
CPU: 4 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc4+ #1
Hardware name: ARM Juno development board (r0) (DT)
Call trace:
[<ffff20000808ad88>] dump_backtrace+0x0/0x280
[<ffff20000808b01c>] show_stack+0x14/0x20
[<ffff200008563a64>] dump_stack+0xa4/0xc8
[<ffff20000824a1fc>] kasan_report_error+0x4fc/0x528
[<ffff20000824a5e8>] kasan_report+0x40/0x48
[<ffff20000824948c>] check_memory_region+0x144/0x1a0
[<ffff200008249814>] memcpy+0x34/0x68
[<ffff200008c3ee2c>] setjmp_pre_handler+0xe4/0x170
[<ffff200008c3ec5c>] kprobe_breakpoint_handler+0xec/0x1d8
[<ffff2000080853a4>] brk_handler+0x5c/0xa0
[<ffff2000080813f0>] do_debug_exception+0xa0/0x138

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>

arm64: kprobes: Cleanup jprobe_return

commit 3b7d14e9f3f1efd4c4348800e977fd1ce4ca660e upstream.

jprobe_return seems to have aged badly. Comments referring to
non-existent behaviours, and a dangerous habit of messing
with registers without telling the compiler.

This patches applies the following remedies:
- Fix the comments to describe the actual behaviour
- Tidy up the asm sequence to directly assign the
  stack pointer without clobbering extra registers
- Mark the rest of the function as unreachable() so
  that the compiler knows that there is no need for
  an epilogue
- Stop making jprobe_return_break a global function
  (you really don't want to call that guy, and it isn't
  even a function).

Tested with tcp_probe.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>

arm64: kprobes: Fix overflow when saving stack

commit ab4c1325d4bf111a590a1f773e3d93bde7f40201 upstream.

The MIN_STACK_SIZE macro tries evaluate how much stack space needs
to be saved in the jprobes_stack array, sized at 128 bytes.

When using the IRQ stack, said macro can happily return up to
IRQ_STACK_SIZE, which is 16kB. Mayhem follows.

This patch fixes things by getting rid of the crazy macro and
limiting the copy to be at most the size of the jprobes_stack
array, no matter which stack we're on.

[dave.long@linaro.org: Since there is no irq_stack in this kernel version
this fix is not strictly necessary, but is included for completeness.]

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>

arm64: kprobes: WARN if attempting to step with PSTATE.D=1

commit 44bd887ce10eb8061f6a137f8a73f823957edd82 upstream.

Stepping with PSTATE.D=1 is bad news. The step won't generate a debug
exception and we'll likely walk off into random data structures. This
should never happen, but when it does, it's a PITA to debug. Add a
WARN_ON to shout if we realise this is about to take place.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>

kprobes: Add arm64 case in kprobe example module

commit af78cede8bfc772baf424fc03f7cd3c8f9437733 upstream.

Add info prints in sample kprobe handlers for ARM64

Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Add kernel return probes support (kretprobes)

commit fcfd708b8cf86b8c1ca6ce014d50287f61c0eb88 upstream.

The pre-handler of this special 'trampoline' kprobe executes the return
probe handler functions and restores original return address in ELR_EL1.
This way the saved pt_regs still hold the original register context to be
carried back to the probed kernel function.

Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Add trampoline code for kretprobes

commit da6a91252ad98d49b49e83b76c1f032cdf6e5258 upstream.

The trampoline code is used by kretprobes to capture a return from a probed
function.  This is done by saving the registers, calling the handler, and
restoring the registers. The code then returns to the original saved caller
return address. It is necessary to do this directly instead of using a
software breakpoint because the code used in processing that breakpoint
could itself be kprobe'd and cause a problematic reentry into the debug
exception handler.

Signed-off-by: William Cohen <wcohen@redhat.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: removed unnecessary masking of the PSTATE bits]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: kprobes instruction simulation support

commit 39a67d49ba353630d144a8eb775500c041c89e7a upstream.

Kprobes needs simulation of instructions that cannot be stepped
from a different memory location, e.g.: those instructions
that uses PC-relative addressing. In simulation, the behaviour
of the instruction is implemented using a copy of pt_regs.

The following instruction categories are simulated:
 - All branching instructions(conditional, register, and immediate)
 - Literal access instructions(load-literal, adr/adrp)

Conditional execution is limited to branching instructions in
ARM v8. If conditions at PSTATE do not match the condition fields
of opcode, the instruction is effectively NOP.

Thanks to Will Cohen for assorted suggested changes.

Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: William Cohen <wcohen@redhat.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: removed linux/module.h include]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Treat all entry code as non-kprobe-able

commit 888b3c8720e0a4033db09ba2364afde6a4763638 upstream.

Entry symbols are not kprobe safe. So blacklist them for kprobing.

[dave.long@linaro.org: Remove check for hypervisor text]

Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: Do not include syscall wrappers in .entry.text]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Blacklist non-kprobe-able symbol

commit 44b53f67c99d0fc53af3066a05d9e7ca5080a850 upstream.

Add all function symbols which are called from do_debug_exception under
NOKPROBE_SYMBOL, as they can not kprobed.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>

arm64: Kprobes with single stepping support

commit 2dd0e8d2d2a157dbc83295a78336c2217110f2f8 upstream.

Add support for basic kernel probes(kprobes) and jump probes
(jprobes) for ARM64.

Kprobes utilizes software breakpoint and single step debug
exceptions supported on ARM v8.

A software breakpoint is placed at the probe address to trap the
kernel execution into the kprobe handler.

ARM v8 supports enabling single stepping before the break exception
return (ERET), with next PC in exception return address (ELR_EL1). The
kprobe handler prepares an executable memory slot for out-of-line
execution with a copy of the original instruction being probed, and
enables single stepping. The PC is set to the out-of-line slot address
before the ERET. With this scheme, the instruction is executed with the
exact same register context except for the PC (and DAIF) registers.

Debug mask (PSTATE.D) is enabled only when single stepping a recursive
kprobe, e.g.: during kprobes reenter so that probed instruction can be
single stepped within the kprobe handler -exception- context.
The recursion depth of kprobe is always 2, i.e. upon probe re-entry,
any further re-entry is prevented by not calling handlers and the case
counted as a missed kprobe).

Single stepping from the x-o-l slot has a drawback for PC-relative accesses
like branching and symbolic literals access as the offset from the new PC
(slot address) may not be ensured to fit in the immediate value of
the opcode. Such instructions need simulation, so reject
probing them.

Instructions generating exceptions or cpu mode change are rejected
for probing.

Exclusive load/store instructions are rejected too.  Additionally, the
code is checked to see if it is inside an exclusive load/store sequence
(code from Pratyush).

System instructions are mostly enabled for stepping, except MSR/MRS
accesses to "DAIF" flags in PSTATE, which are not safe for
probing.

[<dave.long@linaro.org>: changed to remove irq_stack references]

This also changes arch/arm64/include/asm/ptrace.h to use
include/asm-generic/ptrace.h.

Thanks to Steve Capper and Pratyush Anand for several suggested
Changes.

Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: add conditional instruction simulation support

commit 2af3ec08b414ceb9c32fad2bb0f87252f3f18de8 upstream.

Cease using the arm32 arm_check_condition() function and replace it with
a local version for use in deprecated instruction support on arm64. Also
make the function table used by this available for future use by kprobes
and/or uprobes.

This function is derived from code written by Sandeepa Prabhu.

Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Add more test functions to insn.c

commit d59bee887231191c80f2ee674d7ec19179eb40ec upstream.

Certain instructions are hard to execute correctly out-of-line (as in
kprobes).  Test functions are added to insn.[hc] to identify these.  The
instructions include any that use PC-relative addressing, change the PC,
or change interrupt masking. For efficiency and simplicity test
functions are also added for small collections of related instructions.

Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature

commit 0a8ea52c3eb157dd65e224fc95b7c9c99fcba9f7 upstream.

Add HAVE_REGS_AND_STACK_ACCESS_API feature for arm64, including supporting
functions and defines.

[dave.long@linaro.org: Remove irq stack reference and use of bug.h
inside arch/arm64/include/asm/ptrace.h. ]

Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
[catalin.marinas@arm.com: Remove unused functions]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Linux 4.4.25

tpm_crb: fix crb_req_canceled behavior

commit 72fd50e14e46dc0edf360631bdece87c2f066a97 upstream.

The req_canceled() callback is used by tpm_transmit() periodically to
check whether the request has been canceled while it is receiving a
response from the TPM.

The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel
callback, which has two consequences:

* Cancel might not happen.
* req_canceled() always returns zero.

A better place to clear the register is when starting to send a new
command. The behavior of TPM_CRB_CTRL_CANCEL is described in the
section 5.5.3.6 of the PTP specification.

Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: fix a race condition in tpm2_unseal_trusted()

commit d4816edfe706497a8525480c1685ceb9871bc118 upstream.

Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.

Fixes: 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: use file_dentry()

commit e71b9dff0634edb127f449e076e883ef24a8c76c upstream.

Ima tries to call ->setxattr() on overlayfs dentry after having locked
underlying inode, which results in a deadlock.

Reported-by: Krisztian Litkey <kli@iki.fi>
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: cpuidle: Fix error return code

commit af48d7bc3756a0cd882d65bff14ab39746ba57fe upstream.

We know that 'ret = 0' because it has been tested a few lines above.
So, if 'kzalloc' fails, 0 will be returned instead of an error code.
Return -ENOMEM instead.

Fixes: a0d46a3dfdc3 ("ARM: cpuidle: Register per cpuidle device")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs

commit ca88696e8b73a9fa2b1de445747e9235c3a7bd50 upstream.

The Qualcomm PMIC GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.

That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.

If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:

  type mismatch, failed to map hwirq-NN for <FOO>!

Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.

To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.

Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.

Fixes: bce360469676 ("ARM: dts: apq8064: add pm8921 mpp support")
Fixes: 874443fe9e33 ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Björn Andersson <bjorn.andersson@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

commit 061492cfad9f11dbc32df741a7164f307b69b6e6 upstream.

The armada-390.dtsi was broken since the first patch which adds Device Tree
files for Armada 39x SoC was introduced.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes 538da83 ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access

commit 72b4f6a5e903b071f2a7c4eb1418cbe4eefdc344 upstream.

On x86_32, when an interrupt happens from kernel space, SS and SP aren't
pushed and the existing stack is used.  So pt_regs is effectively two
words shorter, and the previous stack pointer is normally the memory
after the shortened pt_regs, aka '&regs->sp'.

But in the rare case where the interrupt hits right after the stack
pointer has been changed to point to an empty stack, like for example
when call_on_stack() is used, the address immediately after the
shortened pt_regs is no longer on the stack.  In that case, instead of
'&regs->sp', the previous stack pointer should be retrieved from the
beginning of the current stack page.

kernel_stack_pointer() wants to do that, but it forgets to dereference
the pointer.  So instead of returning a pointer to the previous stack,
it returns a pointer to the beginning of the current stack.

Note that it's probably outside of kernel_stack_pointer()'s scope to be
switching stacks at all.  The x86_64 version of this function doesn't do
it, and it would be better for the caller to do it if necessary.  But
that's a patch for another day.  This just fixes the original intent.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0788aa6a23cb ("x86: Prepare removal of previous_esp from i386 thread_info structure")
Link: http://lkml.kernel.org/r/472453d6e9f6a2d4ab16aaed4935f43117111566.1471535549.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Prevent force migration of irqs which are not in the vector domain

commit db91aa793ff984ac048e199ea1c54202543952fe upstream.

When a CPU is about to be offlined we call fixup_irqs() that resets IRQ
affinities related to the CPU in question. The same thing is also done when
the system is suspended to S-states like S3 (mem).

For each IRQ we try to complete any on-going move regardless whether the
IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch
its chip_data, assume it is of type struct apic_chip_data and manipulate it
by clearing old_domain mask etc. For irq_chips that are not part of the
x86_vector_domain, like those created by various GPIO drivers, will find
their chip_data being changed unexpectly.

Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets
corrupted after resume:

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  hi

  # rtcwake -s10 -mmem
  <10 seconds passes>

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  ?

Note '?' in the output. It means the struct gpio_chip ->get function is
NULL whereas before suspend it was there.

Fix this by first checking that the IRQ belongs to x86_vector_domain before
we try to use the chip_data as struct apic_chip_data.

Reported-and-tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation

commit 917db484dc6a69969d317b3e57add4208a8d9d42 upstream.

In commit:

  ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")

Christoph references the original patch I wrote implementing pmem support.
The intent of the 'max_pfn' changes in that commit were to enable persistent
memory ranges to be covered by the struct page memmap by default.

However, that approach was abandoned when Christoph ported the patches [1], and
that functionality has since been replaced by devm_memremap_pages().

In the meantime, this max_pfn manipulation is confusing kdump [2] that
assumes that everything covered by the max_pfn is "System RAM".  This
results in kdump hanging or crashing.

 [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html
 [2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098

So fix it.

Reported-by: Zhang Yi <yizhan@redhat.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-nvdimm@lists.01.org
Fixes: ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")
Link: http://lkml.kernel.org/r/147448744538.34910.11287693517367139607.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: BookE: Fix a sanity check

commit ac0e89bb4744d3882ccd275f2416d9ce22f4e1e7 upstream.

We use logical negate where bitwise negate was intended.  It means that
we never return -EINVAL here.

Fixes: ce11e48b7fdd ('KVM: PPC: E500: Add userspace debug stub support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MIPS: Drop other CPU ASIDs on guest MMU changes

commit 91e4f1b6073dd680d86cdb7e42d7cccca9db39d8 upstream.

When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate
TLB entries on the local CPU. This doesn't work correctly on an SMP host
when the guest is migrated to a different physical CPU, as it could pick
up stale TLB mappings from the last time the vCPU ran on that physical
CPU.

Therefore invalidate both user and kernel host ASIDs on other CPUs,
which will cause new ASIDs to be generated when it next runs on those
CPUs.

We're careful only to do this if the TLB entry was already valid, and
only for the kernel ASID where the virtual address it mapped is outside
of the guest user address range.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register

commit fa73c3b25bd8d0d393dc6109a1dba3c2aef0451e upstream.

The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb571f3c92c ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes: 8dd75ccb571f3c92c48014b3dabd3d51a115ab41
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

commit 88003fb10f1fc606e1704611c62ceae95fd1d7da upstream.

This fixes a compile failure:

drivers/built-in.o: In function `wm8350_i2c_probe':
core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c'
Makefile:953: recipe for target 'vmlinux' failed

Fixes: 52b461b86a9f ("mfd: Add regmap cache support for wm8350")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: 88pm80x: Double shifting bug in suspend/resume

commit 9a6dc644512fd083400a96ac4a035ac154fe6b8d upstream.

set_bit() and clear_bit() take the bit number so this code is really
doing "1 << (1 << irq)" which is a double shift bug.  It's done
consistently so it won't cause a problem unless "irq" is more than 4.

Fixes: 70c6cce04066 ('mfd: Support 88pm80x in 80x driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: atmel-hlcdc: Do not sleep in atomic context

commit 2c2469bc03d569c49119db2cccb5cb3f0c6a5b33 upstream.

readl_poll_timeout() calls usleep_range(), but
regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap
spinlock held).

Replace the readl_poll_timeout() call by readl_poll_timeout_atomic().

Fixes: ea31c0cf9b07 ("mfd: atmel-hlcdc: Implement config synchronization")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: rtsx_usb: Avoid setting ucr->current_sg.status

commit 8dcc5ff8fcaf778bb57ab4448fedca9e381d088f upstream.

Member "status" of struct usb_sg_request is managed by usb core. A
spin lock is used to serialize the change of it. The driver could
check the value of req->status, but should avoid changing it without
the hold of the spinlock. Otherwise, it could cause race or error
in usb core.

This patch could be backported to stable kernels with version later
than v3.14.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID

commit 8da08ca03b73593d5299893bf29fc08569c3fb5f upstream.

Currently, usb-line6 module exports an array of MIDI manufacturer ID and
usb-pod module uses it. However, the declaration is not the definition in
common header. The difference is explicit length of array. Although
compiler calculates it and everything goes well, it's better to use the
same representation between definition and declaration.

This commit fills the length of array for usb-line6 module. As a small
good sub-effect, this commit suppress below warnings from static analysis
by sparse v0.5.0.

sound/usb/line6/driver.c:274:43: error: cannot size expression
sound/usb/line6/driver.c:275:16: error: cannot size expression
sound/usb/line6/driver.c:276:16: error: cannot size expression
sound/usb/line6/driver.c:277:16: error: cannot size expression

Fixes: 705ececd1c60 ("Staging: add line6 usb driver")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream.

The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.

Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: David W <regulars@d-dub.org.uk>
Tested-by: David W <regulars@d-dub.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ali5451: Fix out-of-bound position reporting

commit db68577966abc1aeae4ec597b3dcfa0d56e92041 upstream.

The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
  snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.

Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timekeeping: Fix __ktime_get_fast_ns() regression

commit 58bfea9532552d422bde7afa207e1a0f08dffa7d upstream.

In commit 27727df240c7 ("Avoid taking lock in NMI path with
CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code
the timekeeping_get_ns() function, but I forgot to include
the unit conversion from cycles to nanoseconds, breaking the
function's output, which impacts users like perf.

This results in bogus perf timestamps like:
 swapper     0 [000]   253.427536:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426573:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426687:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426800:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426905:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427022:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427127:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427239:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427346:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427463:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   255.426572:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Instead of more reasonable expected timestamps like:
 swapper     0 [000]    39.953768:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.064839:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.175956:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.287103:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.398217:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.509324:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.620437:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.731546:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.842654:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.953772:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    41.064881:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Add the proper use of timekeeping_delta_to_ns() to convert
the cycle delta to nanoseconds as needed.

Thanks to Brendan and Alexei for finding this quickly after
the v4.8 release. Unfortunately the problematic commit has
landed in some -stable trees so they'll need this fix as
well.

Many apologies for this mistake. I'll be looking to add a
perf-clock sanity test to the kselftest timers tests soon.

Fixes: 27727df240c7 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"
Reported-by: Brendan Gregg <bgregg@netflix.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Tested-and-reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

time: Add cycles to nanoseconds translation

commit 6bd58f09e1d8cc6c50a824c00bf0d617919986a1 upstream.

The timekeeping code does not currently provide a way to translate
externally provided clocksource cycles to system time. The cycle count
is always provided by the result clocksource read() method internal to
the timekeeping code. The added function timekeeping_cycles_to_ns()
calculated a nanosecond value from a cycle count that can be added to
tk_read_base.base value yielding the current system time. This allows
clocksource cycle values external to the timekeeping code to provide a
cycle count that can be transformed to system time.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.24

ALSA: hda - Add the top speaker pin config for HP Spectre x360

commit 0eec880966e77bdbee0112989a2be67d92e39929 upstream.

HP Spectre x360 with CX20724 codec has two speaker outputs while the
BIOS sets up only the bottom one (NID 0x17) and disables the top one
(NID 0x1d).

This patch adds a fixup simply defining the proper pincfg for NID 0x1d
so that the top speaker works as is.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169071
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix headset mic detection problem for several Dell laptops

commit 3f640970a41429f0a076c01270bbd014c9eae61c upstream.

One of the laptops has the codec ALC256 on it, applying the
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem, the rest
of laptops have the codec ALC295 on them, they are similar to machines
with ALC225, applying the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE can fix
the problem.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: acpi_get_sleep_type_data: Reduce warnings

commit a59b679ab85635737947310323f2f2bcfa0664a7 upstream.

ACPICA commit 7bb77313091e52a846df4c9c2bea90be31bfb9d8

Eliminate warnings for "not found" _Sx errors, since these
are optional. Original NOT_FOUND status is still returned.

Original changes by Prarit Bhargava.
ACPICA BZ 1208.

Link: https://github.com/acpica/acpica/commit/7bb77313
Link: https://bugs.acpica.org/show_bug.cgi?id=1208
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Charles (Chas) Williams" <ciwillia@brocade.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Adding one more ALC255 pin definition for headset problem

commit 392c9da24a994f238c5d7ea611c6245be4617014 upstream.

We have two new Dell laptop models, they have the same ALC255 pin
definition, but not in the pin quirk table yet, as a result, the
headset microphone can't work. After adding the definition in the
table, the headset microphone works well.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usbtmc: convert to devm_kzalloc"

commit ab21b63e8aedfc73565dd9cdd51eb338341177cb upstream.

This reverts commit e6c7efdcb76f11b04e3d3f71c8d764ab75c9423b.

Turns out it was totally wrong.  The memory is supposed to be bound to
the kref, as the original code was doing correctly, not the
device/driver binding as the devm_kzalloc() would cause.

This fixes an oops when read would be called after the device was
unbound from the driver.

Reported-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: Add ID for a Juniper console

commit decc5360f23e9efe0252094f47f57f254dcbb3a9 upstream.

Signed-off-by: Kyle Jones <kyle@kf5jwc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Fix bug in fbtft-core

commit fc1e2c8ea85e109acf09e74789e9b852f6eed251 upstream.

Commit 367e8560e8d7a62d96e9b1d644028a3816e04206 introduced a bug
in fbtft-core where fps is always 0, this is because variable
update_time is not assigned correctly.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Fixes: 367e8560e8d7 ("Staging: fbtbt: Replace timespec with ktime_t")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: legousbtower: Fix NULL pointer deference

commit 2fae9e5a7babada041e2e161699ade2447a01989 upstream.

This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.

The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.

This bug has existed since 2003. Patch tested by emulated device.

Reported-by: James Patrick-Evans <james@jmp-e.com>
Tested-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: fix hardware flow-control disable

commit a377f9e906af4df9071ba8ddba60188cb4013d93 upstream.

A bug in the CRTSCTS handling caused RTS to alternate between

CRTSCTS=0 => "RTS is transmit active signal" and
CRTSCTS=1 => "RTS is used for receive flow control"

instead of

CRTSCTS=0 => "RTS is statically active" and
CRTSCTS=1 => "RTS is used for receive flow control"

This only happened after first having enabled CRTSCTS.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
[johan: reword commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
[johan: backport to 4.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm log writes: fix bug with too large bios

commit 7efb367320f56fc4d549875b6f3a6940018ef2e5 upstream.

bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries.  However, the incoming bio may have more vector entries if it
was allocated by other means.  For example, bcache submits bios with
more than BIO_MAX_PAGES entries.  This results in bio_alloc() failure.

To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries.  If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: xgene: Add missing parenthesis when clearing divider value

commit 0f4c7a138dfefb0ebdbaf56e3ba2acd2958a6605 upstream.

In the initial fix for non-zero divider shift value, the parenthesis
was missing after the negate operation. This patch adds the required
parenthesis. Otherwise, lower bits may be cleared unintentionally.

Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Toan Le <toanle@apm.com>
Fixes: 1382ea631ddd ("clk: xgene: Fix divider with non-zero shift value")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: mark AIO pseudo-fs noexec

commit 22f6b4d34fcf039c63a94e7670e0da24f8575a5a upstream.

This ensures that do_mmap() won't implicitly make AIO memory mappings
executable if the READ_IMPLIES_EXEC personality flag is set.  Such
behavior is problematic because the security_mmap_file LSM hook doesn't
catch this case, potentially permitting an attacker to bypass a W^X
policy enforced by SELinux.

I have tested the patch on my machine.

To test the behavior, compile and run this:

    #define _GNU_SOURCE
    #include <unistd.h>
    #include <sys/personality.h>
    #include <linux/aio_abi.h>
    #include <err.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <sys/syscall.h>

    int main(void) {
        personality(READ_IMPLIES_EXEC);
        aio_context_t ctx = 0;
        if (syscall(__NR_io_setup, 1, &ctx))
            err(1, "io_setup");

        char cmd[1000];
        sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'",
            (int)getpid());
        system(cmd);
        return 0;
    }

In the output, "rw-s" is good, "rwxs" is bad.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: remove unused callback from batadv_algo_ops struct

commit d9f179877e50ae2681fe7b0b83e0d9f63b6165ad upstream.

Reported-by: Lars Bußmann <ffsoest@kill-you.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
[sven@narfation.org: rewritten commit message to make clear that it is an
 bugfix to an user reported crash]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV

commit 8ec07bf8a8b57d6c58927a16a0a22c0115cf2855 upstream.

When sending QP1 MAD packets which use a GRH, the source GID
(which consists of the 64-bit subnet prefix, and the 64 bit port GUID)
must be included in the packet GRH.

For SR-IOV, a GID cache is used, since the source GID needs to be the
slave's source GID, and not the Hypervisor's GID. This cache also
included a subnet_prefix. Unfortunately, the subnet_prefix field in
the cache was never initialized (to the default subnet prefix 0xfe80::0).
As a result, this field remained all zeroes.  Therefore, when SR-IOV
was active, all QP1 packets which included a GRH had a source GID
subnet prefix of all-zeroes.

However, the subnet-prefix should initially be 0xfe80::0 (the default
subnet prefix). In addition, if OpenSM modifies a port's subnet prefix,
the new subnet prefix must be used in the GRH when sending QP1 packets.
To fix this we now initialize the subnet prefix in the SR-IOV GID cache
to the default subnet prefix. We update the cached value if/when OpenSM
modifies the port's subnet prefix. We take this cached value when sending
QP1 packets when SR-IOV is active.

Note that the value is stored as an atomic64. This eliminates any need
for locking when the subnet prefix is being updated.

Note also that we depend on the FW generating the "port management change"
event for tracking subnet-prefix changes performed by OpenSM. If running
early FW (before 2.9.4630), subnet prefix changes will not be tracked (but
the default subnet prefix still will be stored in the cache; therefore
users who do not modify the subnet prefix will not have a problem).
IF there is a need for such tracking also for early FW, we will add that
capability in a subsequent patch.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix code indentation in QP1 MAD flow

commit baa0be7026e2f7d1d40bfd45909044169e9e3c68 upstream.

The indentation in the QP1 GRH flow in procedure build_mlx_header is
really confusing. Fix it, in preparation for a commit which touches
this code.

Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV

commit e5ac40cd66c2f3cd11bc5edc658f012661b16347 upstream.

Because of an incorrect bit-masking done on the join state bits, when
handling a join request we failed to detect a difference between the
group join state and the request join state when joining as send only
full member (0x8). This caused the MC join request not to be sent.
This issue is relevant only when SRIOV is enabled and SM supports
send only full member.

This fix separates scope bits and join states bits a nibble each.

Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Don't allow MC joins during light MC flush

commit 344bacca8cd811809fc33a249f2738ab757d327f upstream.

This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.

The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.

[18332.714265] ------------[ cut here ]------------
[18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
...
[18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
[18332.779411]  0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
[18332.784960]  0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
[18332.790547]  ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
[18332.796199] Call Trace:
[18332.798015]  [<ffffffff813fed47>] dump_stack+0x63/0x8c
[18332.801831]  [<ffffffff8109add1>] __warn+0xd1/0xf0
[18332.805403]  [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20
[18332.809706]  [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core]
[18332.814384]  [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
[18332.820031]  [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
[18332.825220]  [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
[18332.830290]  [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib]
[18332.834911]  [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0
[18332.839741]  [<ffffffff81772bd1>] rollback_registered+0x31/0x40
[18332.844091]  [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80
[18332.848880]  [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
[18332.853848]  [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib]
[18332.858474]  [<ffffffff81520c08>] dev_attr_store+0x18/0x30
[18332.862510]  [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50
[18332.866349]  [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170
[18332.870471]  [<ffffffff81207198>] __vfs_write+0x28/0xe0
[18332.874152]  [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50
[18332.878274]  [<ffffffff81208062>] vfs_write+0xa2/0x1a0
[18332.881896]  [<ffffffff812093a6>] SyS_write+0x46/0xa0
[18332.885632]  [<ffffffff810039b7>] do_syscall_64+0x57/0xb0
[18332.889709]  [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25
[18332.894727] ---[ end trace 09ebbe31f831ef17 ]---

Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Fix use after free in send_leave function

commit 68c6bcdd8bd00394c234b915ab9b97c74104130c upstream.

The function send_leave sets the member: group->query_id
(group->query_id = ret) after calling the sa_query, but leave_handler
can be executed before the setting and it might delete the group object,
and will get a memory corruption.

Additionally, this patch gets rid of group->query_id variable which is
not used.

Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Fix memory corruption in ipoib cm mode connect flow

commit 546481c2816ea3c061ee9d5658eb48070f69212e upstream.

When a new CM connection is being requested, ipoib driver copies data
from the path pointer in the CM/tx object, the path object might be
invalid at the point and memory corruption will happened later when now
the CM driver will try using that data.

The next scenario demonstrates it:
neigh_add_path --> ipoib_cm_create_tx -->
queue_work (pointer to path is in the cm/tx struct)
#while the work is still in the queue,
#the port goes down and causes the ipoib_flush_paths:
ipoib_flush_paths --> path_free --> kfree(path)
#at this point the work scheduled starts.
ipoib_cm_tx_start --> copy from the (invalid)path pointer:
(memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);)
 -> memory corruption.

To fix that the driver now starts the CM/tx connection only if that
specific path exists in the general paths database.
This check is protected with the relevant locks, and uses the gid from
the neigh member in the CM/tx object which is valid according to the ref
count that was taken by the CM/tx.

Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write

commit dccbfcf52cebb8963246eba5b177b77f26b34da0 upstream.

If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the
write with vmcs02 as the current VMCS.
This will incorrectly apply modifications intended for vmcs01 to vmcs02
and L2 can use it to gain access to L0's x2APIC registers by disabling
virtualized x2APIC while using msr bitmap that assumes enabled.

Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the
current VMCS.  An alternative solution would temporarily make vmcs01 the
current VMCS, but it requires more care.

Fixes: 8d14695f9542 ("x86, apicv: add virtual x2apic support")
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: fix to pass correct device identity to free_irq()

commit 6a8b0c6b18f62a277ffb2139d0c0253fe35d7feb upstream.

free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd

commit 735f2770a770156100f534646158cb58cb8b2939 upstream.

Commit fec1d0115240 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal
exit") has caused a subtle regression in nscd which uses
CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the
shared databases, so that the clients are notified when nscd is
restarted.  Now, when nscd uses a non-persistent database, clients that
have it mapped keep thinking the database is being updated by nscd, when
in fact nscd has created a new (anonymous) one (for non-persistent
databases it uses an unlinked file as backend).

The original proposal for the CLONE_CHILD_CLEARTID change claimed
(https://lkml.org/lkml/2006/10/25/233):

: The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls
: on behalf of pthread_create() library calls.  This feature is used to
: request that the kernel clear the thread-id in user space (at an address
: provided in the syscall) when the thread disassociates itself from the
: address space, which is done in mm_release().
:
: Unfortunately, when a multi-threaded process incurs a core dump (such as
: from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of
: the other threads, which then proceed to clear their user-space tids
: before synchronizing in exit_mm() with the start of core dumping.  This
: misrepresents the state of process's address space at the time of the
: SIGSEGV and makes it more difficult for someone to debug NPTL and glibc
: problems (misleading him/her to conclude that the threads had gone away
: before the fault).
:
: The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a
: core dump has been initiated.

The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269)
seems to have a larger scope than the original patch asked for.  It
seems that limitting the scope of the check to core dumping should work
for SIGSEGV issue describe above.

[Changelog partly based on Andreas' description]
Fixes: fec1d0115240 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit")
Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: William Preston <wpreston@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Andreas Schwab <schwab@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: omap-mcpdm: Fix irq resource handling

commit a8719670687c46ed2e904c0d05fa4cd7e4950cd1 upstream.

Fixes: ddd17531ad908 ("ASoC: omap-mcpdm: Clean up with devm_* function")
Managed irq request will not doing any good in ASoC probe level as it is
not going to free up the irq when the driver is unbound from the sound
card.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysctl: handle error writing UINT_MAX to u32 fields

commit e7d316a02f683864a12389f8808570e37fb90aa3 upstream.

We have scripts which write to certain fields on 3.18 kernels but this
seems to be failing on 4.4 kernels.  An entry which we write to here is
xfrm_aevent_rseqth which is u32.

  echo 4294967295  > /proc/sys/net/core/xfrm_aevent_rseqth

Commit 230633d109e3 ("kernel/sysctl.c: detect overflows when converting
to int") prevented writing to sysctl entries when integer overflow
occurs.  However, this does not apply to unsigned integers.

Heinrich suggested that we introduce a new option to handle 64 bit
limits and set min as 0 and max as UINT_MAX.  This might not work as it
leads to issues similar to __do_proc_doulongvec_minmax.  Alternatively,
we would need to change the datatype of the entry to 64 bit.

  static int __do_proc_doulongvec_minmax(void *data, struct ctl_table
  {
      i = (unsigned long *) data;   //This cast is causing to read beyond the size of data (u32)
      vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64.

Introduce a new proc handler proc_douintvec.  Individual proc entries
will need to be updated to use the new handler.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 230633d109e3 ("kernel/sysctl.c:detect overflows when converting to int")
Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.org
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support

commit 66443efa83dc73775100b7442962ce2cb0d4472e upstream.

When booting from an OpenFirmware which supports it, we use the
"ibm,client-architecture-support" firmware call to communicate
our capabilities to firmware.

The format of the structure we pass to firmware is specified in
PAPR (Power Architecture Platform Requirements), or the public version
LoPAPR (Linux on Power Architecture Platform Reference).

Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte
field at bytes 17-20 for the "Platform Facilities Enable". This is
followed by a 1 byte field at byte 21 for "Sub-Processor Represenation
Level".

Comparing to the code, there we have the Platform Facilities
options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its
full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is
incorrectly placed at byte 18.

Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes
to hopefully make it clearer in future.

As far as I'm aware nothing actually consumes this value at this time,
so the effect of this bug is nil in practice.

It does mean we've been incorrectly setting bit 15 of the "Platform
Facilities Enable" option for the past ~3 1/2 years, so we should avoid
allocating that bit to anything else in future.

Fixes: df77c7992029 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()

commit f823a2aa8f4674c095a5413b9e3ba12d82df06f2 upstream.

wlc_phy_txpower_get_current() does a logical OR of power->flags, which
presumes that power.flags was initiliazed earlier by the caller,
unfortunately, this is not the case, so make sure we zero out the struct
tx_power before calling into wlc_phy_txpower_get_current().

Reported-by: coverity (CID 146011)
Fixes: 5b435de0d7868 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfill

commit 5c5fa1f464ac954982df1d96b9f9a5103d21aedd upstream.

In case dma_mapping_error() returns an error in dma_rxfill, we would be
leaking a packet that we allocated with brcmu_pkt_buf_get_skb().

Reported-by: coverity (CID 1081819)
Fixes: 67d0cf50bd32 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain

commit 3bdae810721b33061d2e541bd78a70f86ca42af3 upstream.

In case brcmf_sdiod_recv_chain() cannot complete a succeful call to
brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we
should, fix this.

Reported-by: coverity (CID 1164856)
Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Skylake: Fix error return code in skl_probe()

commit 979cf59acc9d634cc140aadd0d2915947ab303cc upstream.

Fix to return error code -ENODEV from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-By: Vinod Koul <vinod.kou@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS/flexfiles: Fix layoutcommit after a commit to DS

commit c001c87a63aa2f35358e33eb05e45e4cbcb34f54 upstream.

We should always do a layoutcommit after commit to DS, except if
the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT.

Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS/files: Fix layoutcommit after a commit to DS

commit 73e6c5d854d3f7f75e8b46d3e54aeb5d83fe6b1f upstream.

According to the errata
https://www.rfc-editor.org/errata_search.php?rfc=5661&eid=2751
we should always send layout commit after a commit to DS.

Fixes: bc7d4b8fd091 ("nfs/filelayout: set layoutcommit...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Don't drop CB requests with invalid principals

commit a4e187d83d88eeaba6252aac0a2ffe5eaa73a818 upstream.

Before commit 778be232a207 ("NFS do not find client in NFSv4
pg_authenticate"), the Linux callback server replied with
RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB
request. Let's restore that behavior so the server has a chance to
do something useful about it, and provide a warning that helps
admins correct the problem.

Fixes: 778be232a207 ("NFS do not find client in NFSv4 ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

svc: Avoid garbage replies when pc_func() returns rpc_drop_reply

commit 0533b13072f4bf35738290d2cf9e299c7bc6c42a upstream.

If an RPC program does not set vs_dispatch and pc_func() returns
rpc_drop_reply, the server sends a reply anyway containing a single
word containing the value RPC_DROP_REPLY (in network byte-order, of
course). This is a nonsense RPC message.

Fixes: 9e701c610923 ("svcrpc: simpler request dropping")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: at_xdmac: fix debug string

commit 3935e08768ff777da6496521b1fc36f72823672c upstream.

mbr_ds is an integer, don't use %pad to print it.

Fixes: commit 268914f4e7a0 ("dmaengine: at_xdmac: use %pad format string for dma_addr_t")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fnic: pci_dma_mapping_error() doesn't return an error code

commit dd7328e4c53649c1c7ec36bc1cf5b229b8662047 upstream.

pci_dma_mapping_error() returns true on error and false on success.

Fixes: fd6ddfa4c1dd ('fnic: check pci_map_single() return value')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

avr32: off by one in at32_init_pio()

commit 55f1cf83d5cf885c75267269729805852039c834 upstream.

The pio_dev[] array has MAX_NR_PIO_DEVICES elements so the > should be
>=.

Fixes: 5f97f7f9400d ('[PATCH] avr32 architecture')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>