firefly-linux-kernel-4.4.55.git
15 years agotun: Limit amount of queued packets per device
Herbert Xu [Fri, 6 Feb 2009 05:25:32 +0000 (21:25 -0800)]
tun: Limit amount of queued packets per device

Unlike a normal socket path, the tuntap device send path does
not have any accounting.  This means that the user-space sender
may be able to pin down arbitrary amounts of kernel memory by
continuing to send data to an end-point that is congested.

Even when this isn't an issue because of limited queueing at
most end points, this can also be a problem because its only
response to congestion is packet loss.  That is, when those
local queues at the end-point fills up, the tuntap device will
start wasting system time because it will continue to send
data there which simply gets dropped straight away.

Of course one could argue that everybody should do congestion
control end-to-end, unfortunately there are people in this world
still hooked on UDP, and they don't appear to be going away
anywhere fast.  In fact, we've always helped them by performing
accounting in our UDP code, the sole purpose of which is to
provide congestion feedback other than through packet loss.

This patch attempts to apply the same bandaid to the tuntap device.
It creates a pseudo-socket object which is used to account our
packets just as a normal socket does for UDP.  Of course things
are a little complex because we're actually reinjecting traffic
back into the stack rather than out of the stack.

The stack complexities however should have been resolved by preceding
patches.  So this one can simply start using skb_set_owner_w.

For now the accounting is essentially disabled by default for
backwards compatibility.  In particular, we set the cap to INT_MAX.
This is so that existing applications don't get confused by the
sudden arrival EAGAIN errors.

In future we may wish (or be forced to) do this by default.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Reexport sock_alloc_send_pskb
Herbert Xu [Thu, 5 Feb 2009 00:55:54 +0000 (16:55 -0800)]
net: Reexport sock_alloc_send_pskb

The function sock_alloc_send_pskb is completely useless if not
exported since most of the code in it won't be used as is.  In
fact, this code has already been duplicated in the tun driver.

Now that we need accounting in the tun driver, we can in fact
use this function as is.  So this patch marks it for export again.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Partially allow skb destructors to be used on receive path
Herbert Xu [Thu, 5 Feb 2009 00:55:27 +0000 (16:55 -0800)]
net: Partially allow skb destructors to be used on receive path

As it currently stands, skb destructors are forbidden on the
receive path because the protocol end-points will overwrite
any existing destructor with their own.

This is the reason why we have to call skb_orphan in the loopback
driver before we reinject the packet back into the stack, thus
creating a period during which loopback traffic isn't charged
to any socket.

With virtualisation, we have a similar problem in that traffic
is reinjected into the stack without being associated with any
socket entity, thus providing no natural congestion push-back
for those poor folks still stuck with UDP.

Now had we been consistent in telling them that UDP simply has
no congestion feedback, I could just fob them off.  Unfortunately,
we appear to have gone to some length in catering for this on
the standard UDP path, with skb/socket accounting so that has
created a very unhealthy dependency.

Alas habits are difficult to break out of, so we may just have
to allow skb destructors on the receive path.

It turns out that making skb destructors useable on the receive path
isn't as easy as it seems.  For instance, simply adding skb_orphan
to skb_set_owner_r isn't enough.  This is because we assume all
over the IP stack that skb->sk is an IP socket if present.

The new transparent proxy code goes one step further and assumes
that skb->sk is the receiving socket if present.

Now all of this can be dealt with by adding simple checks such
as only treating skb->sk as an IP socket if skb->sk->sk_family
matches.  However, it turns out that for bridging at least we
don't need to do all of this work.

This is of interest because most virtualisation setups use bridging
so we don't actually go through the IP stack on the host (with
the exception of our old nemesis the bridge netfilter, but that's
easily taken care of).

So this patch simply adds skb_orphan to the point just before we
enter the IP stack, but after we've gone through the bridge on the
receive path.  It also adds an skb_orphan to the one place in
netfilter that touches skb->sk/skb->destructor, that is, tproxy.

One word of caution, because of the internal code structure, anyone
wishing to deploy this must use skb_set_owner_w as opposed to
skb_set_owner_r since many functions that create a new skb from
an existing one will invoke skb_set_owner_w on the new skb.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Thu, 5 Feb 2009 00:52:41 +0000 (16:52 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

15 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Thu, 5 Feb 2009 00:51:58 +0000 (16:51 -0800)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

15 years agogianfar: Fix stashing support
Andy Fleming [Thu, 5 Feb 2009 00:43:44 +0000 (16:43 -0800)]
gianfar: Fix stashing support

Stashing is only supported on the 85xx (e500-based) SoCs.  The 83xx and 86xx
chips don't have a proper cache for this.  U-Boot has been updated to add
stashing properties to the device tree nodes of gianfar devices on 85xx.  So
now we modify Linux to keep stashing off unless those properties are there.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: Add support for skb recycling
Andy Fleming [Thu, 5 Feb 2009 00:43:16 +0000 (16:43 -0800)]
gianfar: Add support for skb recycling

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: Merge UCC and gianfar MDIO bus drivers
Andy Fleming [Thu, 5 Feb 2009 00:42:12 +0000 (16:42 -0800)]
netdev: Merge UCC and gianfar MDIO bus drivers

The MDIO bus drivers for the UCC and gianfar ethernet controllers are
essentially the same.  There's no reason to duplicate that much code.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: Fix potential soft reset race
Andy Fleming [Thu, 5 Feb 2009 00:38:05 +0000 (16:38 -0800)]
gianfar: Fix potential soft reset race

SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work
properly.  The syncs in the gfar_write() commands have been hiding this, but
we need to guarantee it.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: Fix BD_LENGTH_MASK definition
Andy Fleming [Thu, 5 Feb 2009 00:37:40 +0000 (16:37 -0800)]
gianfar: Fix BD_LENGTH_MASK definition

BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not
the low byte.  The old way, we would never be able to clean up tx packets with
sizes divisible by 256.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovirtio_net: Allow setting the MAC address of the NIC
Alex Williamson [Thu, 5 Feb 2009 00:36:34 +0000 (16:36 -0800)]
virtio_net: Allow setting the MAC address of the NIC

Many physical NICs let the OS re-program the "hardware" MAC
address.  Virtual NICs should allow this too.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovirtio_net: Add support for VLAN filtering in the hypervisor
Alex Williamson [Wed, 4 Feb 2009 09:02:50 +0000 (09:02 +0000)]
virtio_net: Add support for VLAN filtering in the hypervisor

VLAN filtering allows the hypervisor to drop packets from VLANs
that we're not a part of, further reducing the number of extraneous
packets recieved.  This makes use of the VLAN virtqueue command class.
The CTRL_VLAN feature bit tells us whether the backend supports VLAN
filtering.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovirtio_net: Add a MAC filter table
Alex Williamson [Wed, 4 Feb 2009 09:02:45 +0000 (09:02 +0000)]
virtio_net: Add a MAC filter table

Make use of the MAC control virtqueue class to support a MAC
filter table.  The filter table is managed by the hypervisor.
We consider the table to be available if the CTRL_RX feature
bit is set.  We leave it to the hypervisor to manage the table
and enable promiscuous or all-multi mode as necessary depending
on the resources available to it.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovirtio_net: Add a set_rx_mode interface
Alex Williamson [Wed, 4 Feb 2009 09:02:40 +0000 (09:02 +0000)]
virtio_net: Add a set_rx_mode interface

Make use of the RX_MODE control virtqueue class to enable the
set_rx_mode netdev interface.  This allows us to selectively
enable/disable promiscuous and allmulti mode so we don't see
packets we don't want.  For now, we automatically enable these
as needed if additional unicast or multicast addresses are
requested.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovirtio_net: Add a virtqueue for outbound control commands
Alex Williamson [Wed, 4 Feb 2009 09:02:34 +0000 (09:02 +0000)]
virtio_net: Add a virtqueue for outbound control commands

This will be used for RX mode, MAC filter table, VLAN filtering, etc...

The control transaction consists of one or more "out" sg entries and
one or more "in" sg entries.  The first out entry contains a header
defining the class and command.  Additional out entries may provide
data for the command.  The last in entry provides a status response
back from the command.

Virtqueues typically run asynchronous, running a callback function
when there's data in the channel.  We can't readily make use of this
in the command paths where we need to use this.  Instead, we kick
the virtqueue and spin.  The kick causes an I/O write, triggering an
immediate trap into the hypervisor.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocxgb3: Fix lro switch
Divy Le Ray [Thu, 5 Feb 2009 00:31:39 +0000 (16:31 -0800)]
cxgb3: Fix lro switch

The LRO switch is always set to 1 in the rx processing loop.
It breaks the accelerated iSCSI receive traffic.
Fix its computation.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Wed, 4 Feb 2009 15:56:25 +0000 (07:56 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (40 commits)
  Blackfin arch: Remove outdated code
  Blackfin arch: Fix udelay implementation
  Blackfin arch: Update Copyright information
  Blackfin arch: Add BF561 PPI POLS, POLC Masks
  Blackfin arch: Update CM-BF527 kernel config
  Blackfin arch: define bfin_memmap as static since it is only used here
  Blackfin arch: cplb mananger: use a do...while loop rather than a for loop
  Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails
  Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
  Blackfin arch: build jtag tty driver as a module by default
  Blackfin arch: fix 2 bugs related to debug
  Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
  Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
  Blackfin arch: base SIC_IWR# programming on whether the MMR exists
  Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
  Blackfin arch: fixup board init function name
  Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
  Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
  Blackfin arch: sync reboot handler with version in u-boot
  Blackfin arch: Faster Implementation of csum_tcpudp_nofold()
  ...

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 4 Feb 2009 15:54:00 +0000 (07:54 -0800)]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Kill bogus TPC/address truncation during 32-bit faults.
  sparc: fixup for sparseirq changes
  sparc64: Validate kernel generated fault addresses on sparc64.
  sparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode.
  sparc64: Implement NMI watchdog on capable cpus.
  sparc: Probe PMU type and record in sparc_pmu_type.
  sparc64: Move generic PCR support code to seperate file.

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 4 Feb 2009 15:52:21 +0000 (07:52 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sunrpc: fix rdma dependencies
  e1000: Fix PCI enable to honor the need_ioport flag
  sgi-xp: link XPNET's net_device_ops to its net_device structure
  pcnet_cs: Fix misuse of the equality operator.
  hso: add new device id's
  dca: redesign locks to fix deadlocks
  cassini/sungem: limit reaches -1, but 0 tested
  net: variables reach -1, but 0 tested
  qlge: bugfix: Add missing netif_napi_del call.
  qlge: bugfix: Add flash offset for second port.
  qlge: bugfix: Fix endian issue when reading flash.
  udp: increments sk_drops in __udp_queue_rcv_skb()
  net: Fix userland breakage wrt. linux/if_tunnel.h
  net: packet socket packet_lookup_frame fix

15 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-mfd
Linus Torvalds [Wed, 4 Feb 2009 15:40:54 +0000 (07:40 -0800)]
Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: Remove non exported references from pcf50633

15 years agoBlackfin arch: Remove outdated code
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Remove outdated code

The removed version with the loop registers saved on the stack was
originally intended to workaround the missing toolchain support for
LoopReg Clobbers.

Since our toolchain now supports these there is no point in keeping this
workaround. And since we don't touch LoopRegs anymore we're no longer
subject for ANOMALY_05000312.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix udelay implementation
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix udelay implementation

Avoid possible overflow during 32*32->32 multiplies.

Reported-by: Marco Reppenhagen <marco.reppenhagen@auerswald.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Update Copyright information
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Update Copyright information

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add BF561 PPI POLS, POLC Masks
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Add BF561 PPI POLS, POLC Masks

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Update CM-BF527 kernel config
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Update CM-BF527 kernel config

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: define bfin_memmap as static since it is only used here
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: define bfin_memmap as static since it is only used here

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: cplb mananger: use a do...while loop rather than a for loop
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: cplb mananger: use a do...while loop rather than a for loop

use a do...while loop rather than a for loop to get slightly better
optimization and to avoid gcc "may be used uninitialized" warnings ...
we know that the [id]cplb_nr_bounds variables will never be 0, so this
is OK

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fix bug - traps test case 19 for exception 0x2d fails
Bernd Schmidt [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails

Enable null pointer checking for ICPLBs. The code was there but for
some reason I had commented it out at some stage during development.

Should restrict this to 1K since atomic ops start there.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform...
Graf Yang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: build jtag tty driver as a module by default
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: build jtag tty driver as a module by default

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fix 2 bugs related to debug
Jie Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: fix 2 bugs related to debug

 - unable to single step over emuexcpt instruction
 - gdbproxy goes into infinite loop when doing gdb does "next" over
   "emuexcpt"

Don't decrement PC after software breakpoint.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
Bryan Wu [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning

Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
Graf Yang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2

bss_l2 section is garbage when the data in this section is used by
_bfin_relocate_l1_mem, so move the zero out function ahead.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: base SIC_IWR# programming on whether the MMR exists
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: base SIC_IWR# programming on whether the MMR exists

base SIC_IWR# programming on whether the MMR exists
rather than having to maintain another list of processors

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fixup board init function name
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: fixup board init function name

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs

Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things out

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: bfin_reset->_bfin_reset redirection no longer needed
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: sync reboot handler with version in u-boot
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: sync reboot handler with version in u-boot

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Faster Implementation of csum_tcpudp_nofold()
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Faster Implementation of csum_tcpudp_nofold()

Avoid conditional branch instructions during carry bit additions.
Special thanks to Bernd.
Simplify: Use ((len + proto) << 8) like every other __LITTLE_ENDIAN__ machine

Cc: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare...
Graf Yang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix bug - BF518 port F, G, and H have different mux offset compare to BF527

[Mike Frysinger <vapier.adi@gmail.com>: keep the ifdef nest down]

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add in cflag to support mlong-calls for kgdb_test
Grace Pan [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Add in cflag to support mlong-calls for kgdb_test

Signed-off-by: Grace Pan <grace.pan@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd
Sonic Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd

[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoMAINTIANERS: Blackfin: remove subscribers-only marking
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
MAINTIANERS: Blackfin: remove subscribers-only marking

remove subscribers-only marking as the list is
automatically & silently moderated for people

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add ability to count and display number of NMI interrupts
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Add ability to count and display number of NMI interrupts

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add a few more instructions that can cause the trace buffer to be...
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Add a few more instructions that can cause the trace buffer to be discontiguous

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix URL
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix URL

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: cleanup bf54x ifdef mess in gpio code
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: cleanup bf54x ifdef mess in gpio code

merge more of the bf54x and !bf54x gpio code together to
cut down on #ifdef mess

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Add one more check on `fp' to prevent double fault
Jie Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Add one more check on `fp' to prevent double fault

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: explicit add a might sleep to gpio_free
Uwe Kleine-Koenig [Wed, 4 Feb 2009 09:02:30 +0000 (17:02 +0800)]
Blackfin arch: explicit add a might sleep to gpio_free

According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This patch changes the gpio_free implementations for the blackfin
architecture.

Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
15 years agoBlackfin arch: don't accidently re-enable interrupts
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: don't accidently re-enable interrupts

Make sure we don't accidently re-enable interrupts if we are being
called in atomic context

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Print out where the bootmode is coming from (for easier debugging).
Robin Getz [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Print out where the bootmode is coming from (for easier debugging).

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: reset POLAR setting when acquiring a gpio for the first time
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: reset POLAR setting when acquiring a gpio for the first time

when requesting a GPIO for the first time, the POLAR setting is not
set to a sane state.  this can lead to indeterminate behavior that
cannot be resolved without an explicit write to the Blackfin port POLAR
register.

when requesting a GPIO for the first time via gpio_request(), the POLAR
setting for the GPIO in question should be set to sane state.  this
should occur if the GPIO has not been allocated in any other way.

some examples:
 - when doing something like "request_irq(); gpio_request();" on the
   same GPIO, the POLAR setting should not be reset.
 - when doing "gpio_request(); gpio_request();" on the same GPIO, the
   POLAR setting should be reset only the first time and not the second.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix Bug - request lines with peripheral_request_list, but don't get...
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix Bug - request lines with peripheral_request_list, but don't get freed with peripheral_free_list

Remove erroneous check_gpio(ident) in peripheral_free()

Reported-by: Michael McTernan <mmcternan@airvana.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: Fix Bug - Kernel does not boot if re-program clocks
Michael Hennerich [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: Fix Bug - Kernel does not boot if re-program clocks

On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data
path width, typically set 0 for a 32-bit bus width. On other
Blackfin derivatives this bit should be set by default.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: fix bug - Dmacopy failed in BF537-STAMP
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: fix bug - Dmacopy failed in BF537-STAMP

Dmacopy failed in BF537-STAMP when copy from SRAM to SDRAM and kernel
will reboot automatically.

Fixing by doing a SSYNC before mucking with DMA registers

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: enable bfin_eth in bf51x by default
Sonic Zhang [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: enable bfin_eth in bf51x by default

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: line up machine-/cpu- vars after BF54xM addition
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: line up machine-/cpu- vars after BF54xM addition

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: add support for mobile ddr bf54x parts
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: add support for mobile ddr bf54x parts

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agoBlackfin arch: scrub comments/whitespace/cvs keywords
Mike Frysinger [Wed, 4 Feb 2009 08:49:45 +0000 (16:49 +0800)]
Blackfin arch: scrub comments/whitespace/cvs keywords

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
15 years agowrite-back: fix nr_to_write counter
Artem Bityutskiy [Mon, 2 Feb 2009 16:33:49 +0000 (18:33 +0200)]
write-back: fix nr_to_write counter

Commit 05fe478dd04e02fa230c305ab9b5616669821dd3 introduced some
@wbc->nr_to_write breakage.

It made the following changes:
 1. Decrement wbc->nr_to_write instead of nr_to_write
 2. Decrement wbc->nr_to_write _only_ if wbc->sync_mode == WB_SYNC_NONE
 3. If synced nr_to_write pages, stop only if if wbc->sync_mode ==
    WB_SYNC_NONE, otherwise keep going.

However, according to the commit message, the intention was to only make
change 3.  Change 1 is a bug.  Change 2 does not seem to be necessary,
and it breaks UBIFS expectations, so if needed, it should be done
separately later.  And change 2 does not seem to be documented in the
commit message.

This patch does the following:
 1. Undo changes 1 and 2
 2. Add a comment explaining change 3 (it very useful to have comments
    in _code_, not only in the commit).

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFix my email address in qd65xx.[ch]/pata_qdi.c
Samuel Thibault [Tue, 3 Feb 2009 12:12:58 +0000 (13:12 +0100)]
Fix my email address in qd65xx.[ch]/pata_qdi.c

The @fnac.net will be shut down within a couple of months, so fix my
email address.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Wed, 4 Feb 2009 00:52:44 +0000 (16:52 -0800)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: remove fast unmounting
  UBIFS: return sensible error codes
  UBIFS: remount ro fixes
  UBIFS: spelling fix 'date' -> 'data'
  UBIFS: sync wbufs after syncing inodes and pages
  UBIFS: fix LPT out-of-space bug (again)
  UBIFS: fix no_chk_data_crc
  UBIFS: fix assertions
  UBIFS: ensure orphan area head is initialized
  UBIFS: always clean up GC LEB space
  UBIFS: add re-mount debugging checks
  UBIFS: fix LEB list freeing
  UBIFS: simplify locking
  UBIFS: document dark_wm and dead_wm better
  UBIFS: do not treat all data as short term
  UBIFS: constify operations
  UBIFS: do not commit twice

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Wed, 4 Feb 2009 00:52:10 +0000 (16:52 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  NVRAM depends on RTC_DRV_CMOS
  rename platform_driver name "flash" to "sa1100-mtd"
  annotate that [fp, #-4] is the saved lr
  Use __SPIN_LOCK_UNLOCKED to initialize bad_irq_desc.lock
  ARM: OMAP: fix fault in enter_full_retention()
  ARM: OMAP: Mask interrupts when disabling interrupts, v2
  ARM: OMAP: gptimer min_delta_ns corrected
  ARM: OMAP: Fix hsmmc init, v2
  ARM: OMAP: Fix omap34xx revision detection for ES3.1
  ARM: OMAP: DMA: Fix uninitialized channel flags
  ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handling
  ARM: OMAP: Fix McBSP spin_lock deadlock
  [ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches
  [ARM] call undefined instruction exception handler with irqs enabled
  [ARM] msm: fix build errors
  [ARM] etherh: continue fixing build failure

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Wed, 4 Feb 2009 00:50:20 +0000 (16:50 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: add quota call to ocfs2_remove_btree_range()
  ocfs2: Wakeup the downconvert thread after a successful cancel convert
  ocfs2: Access the xattr bucket only before modifying it.
  configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()
  ocfs2: Fix possible deadlock in ocfs2_write_dquot()
  ocfs2: Push out dropping of dentry lock to ocfs2_wq

15 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Wed, 4 Feb 2009 00:49:54 +0000 (16:49 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  [XFS] Warn on transaction in flight on read-only remount
  xfs: Check buffer lengths in log recovery
  don't reallocate sxp variable passed into xfs_swapext

15 years agosparc64: Kill bogus TPC/address truncation during 32-bit faults.
David S. Miller [Wed, 4 Feb 2009 00:28:23 +0000 (16:28 -0800)]
sparc64: Kill bogus TPC/address truncation during 32-bit faults.

This builds upon eeabac7386ca13bfe1a58afeb04326a9e1a3a20e
("sparc64: Validate kernel generated fault addresses on sparc64.")

Upon further consideration, we actually should never see any
fault addresses for 32-bit tasks with the upper 32-bits set.

If it does every happen, by definition it's a bug.  Whatever
context created that fault would only have that fault satisfied
if we used the full 64-bit address.  If we truncate it, we'll
always fault the wrong address and we'll always loop faulting
forever.

So catch such conditions and mark them as errors always.  Log
the error and fail the fault.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosunrpc: fix rdma dependencies
Randy Dunlap [Tue, 3 Feb 2009 23:20:13 +0000 (15:20 -0800)]
sunrpc: fix rdma dependencies

Fix sunrpc/rdma build dependencies.
Survives 12 build combinations of INET, IPV6, SUNRPC,
INFINIBAND, and INFINIBAND_ADDR_TRANS.

ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined!
ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!
ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoe1000: Fix PCI enable to honor the need_ioport flag
Karsten Keil [Tue, 3 Feb 2009 23:18:01 +0000 (15:18 -0800)]
e1000: Fix PCI enable to honor the need_ioport flag

On machine were no IO ports are assigned the call
to pci_enable_device() will fail, even if need_ioport
is false, we need to use pci_enable_device_mem() here.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosgi-xp: link XPNET's net_device_ops to its net_device structure
Dean Nelson [Tue, 3 Feb 2009 23:16:17 +0000 (15:16 -0800)]
sgi-xp: link XPNET's net_device_ops to its net_device structure

A recent patch by Stephen Hemminger to convert XPNET to use net_device_ops and
internal net_device_stats failed to link the net_device_ops structure to the
net_device structure. See commit e8ac9c55f28482f5b2f497a8e7eb90985db237c2
("xpnet: convert devices to new API").

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agos2io: Formatting log message
Breno Leitao [Tue, 3 Feb 2009 23:15:15 +0000 (15:15 -0800)]
s2io: Formatting log message

S2IO driver is printing dev->name before the name being allocated, which
display eth%d instead of eth0, eth1, etc. Example:

eth%d: Enabling MSIX failed
eth%d: MSI-X requested but failed to enable

This patch just change eth%d to s2io.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agopcnet_cs: Fix misuse of the equality operator.
Cord Walter [Tue, 3 Feb 2009 23:14:05 +0000 (15:14 -0800)]
pcnet_cs: Fix misuse of the equality operator.

Signed-off-by: Cord Walter <qord@cwalter.net>
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agohso: add new device id's
Filip Aben [Tue, 3 Feb 2009 23:13:26 +0000 (15:13 -0800)]
hso: add new device id's

This patch adds a few device ID's. It also removes an ID that was used
in an internal engineering version of a device and will never see
commercial light. Even if this ID will be 'recycled' in the future,
which is very unlikely, we don't know what kind of device will be
behind it. Therefore it's safer to remove it.

Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosky2: set VPD size
Stephen Hemminger [Tue, 3 Feb 2009 11:27:30 +0000 (11:27 +0000)]
sky2: set VPD size

Read configuration register during probe and use it to size the
available VPD. Move existing code using same register slightly
earlier in probe handling.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosky2: move VPD display into debug interface
Stephen Hemminger [Tue, 3 Feb 2009 11:27:29 +0000 (11:27 +0000)]
sky2: move VPD display into debug interface

The VPD stuff has more data and isn't generally that useful, so move
it into the existing debugfs display and use the new PCI VPD
accessor routines.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosky2: handle dma mapping errors
Stephen Hemminger [Tue, 3 Feb 2009 11:27:28 +0000 (11:27 +0000)]
sky2: handle dma mapping errors

On non-x86 platforms it is possible to run out of DMA mapping resources.
The driver was ignoring this and could cause corruptions.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosky2: remove unneede workaround
Stephen Hemminger [Tue, 3 Feb 2009 11:27:27 +0000 (11:27 +0000)]
sky2: remove unneede workaround

This workaround is not needed. It was inherited from sk98lin driver but only
applies to an early development version of the chip that is not supported
by sky2.  The workaround required an unnecessary pci read which hurts performance

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Tue, 3 Feb 2009 20:41:58 +0000 (12:41 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6

15 years ago[XFS] Warn on transaction in flight on read-only remount
Felix Blyakher [Fri, 23 Jan 2009 03:34:05 +0000 (21:34 -0600)]
[XFS] Warn on transaction in flight on read-only remount

Till VFS can correctly support read-only remount without racing,
use WARN_ON instead of BUG_ON on detecting transaction in flight
after quiescing filesystem.

Signed-off-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
15 years agoxfs: Check buffer lengths in log recovery
Dave Chinner [Thu, 22 Jan 2009 04:37:47 +0000 (15:37 +1100)]
xfs: Check buffer lengths in log recovery

Before trying to obtain, read or write a buffer,
check that the buffer length is actually valid. If
it is not valid, then something read in the recovery
process has been corrupted and we should abort
recovery.

Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux...
Felix Blyakher [Tue, 3 Feb 2009 16:38:41 +0000 (10:38 -0600)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into for-linus

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Tue, 3 Feb 2009 15:39:55 +0000 (07:39 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book
  libata: add no penalty retry request for EH device handling routines
  libata: improve probe failure handling
  libata: add @spd_limit to sata_down_spd_limit()
  libata: clear dev->ering in smarter way
  libata: check onlineness before using SPD in sata_down_spd_limit()
  libata: move ata_dev_disable() to libata-eh.c
  libata: fix EH device failure handling
  sata_nv: ck804 has borked hardreset too
  ide/libata: fix ata_id_is_cfa() (take 4)
  libata: fix kernel-doc warnings
  ahci: add a module parameter to ignore the SSS flags for async scanning
  sata_mv: Fix chip type for Hightpoint RocketRaid 1740/1742
  [libata] sata_sil: Fix compilation error with libata debugging enabled

15 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Tue, 3 Feb 2009 08:15:35 +0000 (00:15 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
drivers/net/Kconfig

15 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
David S. Miller [Tue, 3 Feb 2009 07:55:27 +0000 (23:55 -0800)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6

15 years agotun: Check supplemental groups in TUN/TAP driver.
Michael Tokarev [Tue, 3 Feb 2009 07:34:56 +0000 (23:34 -0800)]
tun: Check supplemental groups in TUN/TAP driver.

Michael Tokarev wrote:
[]
> 2, and this is the main one: How about supplementary groups?
>
> Here I have a valid usage case: a group of testers running various
> versions of windows using KVM (kernel virtual machine), 1 at a time,
> to test some software.  kvm is set up to use bridge with a tap device
> (there should be a way to connect to the machine).  Anyone on that group
> has to be able to start/stop the virtual machines.
>
> My first attempt - pretty obvious when I saw -g option of tunctl - is
> to add group ownership for the tun device and add a supplementary group
> to each user (their primary group should be different).  But that fails,
> since kernel only checks for egid, not any other group ids.
>
> What's the reasoning to not allow supplementary groups and to only check
> for egid?

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodca: redesign locks to fix deadlocks
Maciej Sosnowski [Tue, 3 Feb 2009 07:26:57 +0000 (23:26 -0800)]
dca: redesign locks to fix deadlocks

Change spin_locks to irqsave to prevent dead-locks.
Protect adding and deleting to/from dca_providers list.
Drop the lock during dca_sysfs_add_req() and dca_sysfs_remove_req() calls
as they might sleep (use GFP_KERNEL allocation).

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoconnector: create connector workqueue only while needed once
Frederic Weisbecker [Tue, 3 Feb 2009 07:22:04 +0000 (23:22 -0800)]
connector: create connector workqueue only while needed once

The netlink connector uses its own workqueue to relay the datas sent
from userspace to the appropriate callback.  If you launch the test
from Documentation/connector and change it a bit to send a high flow
of data, you will see thousands of events coming to the "cqueue"
workqueue by looking at the workqueue tracer.

This flow of events can be sent very quickly. So, to not encumber the
kevent workqueue and delay other jobs, the "cqueue" workqueue should
remain.

But this workqueue is pointless most of the time, it will always be
created (assuming you have built it of course) although only
developpers with specific needs will use it.

So avoid this "most of the time useless task", this patch proposes to
create this workqueue only when needed once.  The first jobs to be
sent to connector callbacks will be sent to kevent while the "cqueue"
thread creation will be scheduled to kevent too.

The following jobs will continue to be scheduled to keventd until the
cqueue workqueue is created, and then the rest of the jobs will
continue to perform as usual, through this dedicated workqueue.

Each time I tested this patch, only the first event was sent to
keventd, the rest has been sent to cqueue which have been created
quickly.

Also, this patch fixes some trailing whitespaces on the connector files.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocassini/sungem: limit reaches -1, but 0 tested
Roel Kluin [Tue, 3 Feb 2009 07:19:50 +0000 (23:19 -0800)]
cassini/sungem: limit reaches -1, but 0 tested

while (limit--)
if (test())
break;

if (limit <= 0)
goto test_failed;

In the last iteration, limit is decremented after the test to 0.
If just thereafter test() succeeds and a break occurs, the goto
still occurs because limit is 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc: fixup for sparseirq changes
Stephen Rothwell [Tue, 3 Feb 2009 06:14:28 +0000 (22:14 -0800)]
sparc: fixup for sparseirq changes

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc64: Validate kernel generated fault addresses on sparc64.
David S. Miller [Tue, 3 Feb 2009 06:08:15 +0000 (22:08 -0800)]
sparc64: Validate kernel generated fault addresses on sparc64.

In order to handle all of the cases of address calculation overflow
properly, we run sparc 32-bit processes in "address masking" mode
when running on a 64-bit kernel.

Address masking mode zeros out the top 32-bits of the address
calculated for every load and store instruction.

However, when we're in privileged mode we have to run with that
address masking mode disabled even when accessing userspace from
the kernel.

To "simulate" the address masking mode we clear the top-bits by
hand for 32-bit processes in the fault handler.

It is the responsibility of code in the compat layer to properly
zero extend addresses used to access userspace.  If this isn't
followed properly we can get into a fault loop.

Say that the user address is 0xf0000000 but for whatever reason
the kernel code sign extends this to 64-bit, and then the kernel
tries to access the result.

In such a case we'll fault on address 0xfffffffff0000000 but the fault
handler will process that fault as if it were to address 0xf0000000.
We'll loop faulting forever because the fault never gets satisfied.

So add a check specifically for this case, when the kernel is faulting
on a user address access and the addresses don't match up.

This code path is sufficiently slow path, and this bug is sufficiently
painful to diagnose, that this kind of bug check is warranted.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode.
David S. Miller [Tue, 3 Feb 2009 05:57:48 +0000 (21:57 -0800)]
sparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode.

When we're idling in NOHZ mode, timer interrupts are not running.

Evidence of processing timer interrupts is what the NMI watchdog
uses to determine if the CPU is stuck.

On Niagara, we'll yield the cpu.  This will make the cpu, at
worst, hang out in the hypervisor until an interrupt arrives.
This will prevent the NMI watchdog timer from firing.

However on non-Niagara we just loop executing instructions
which will cause the NMI watchdog to keep firing.  It won't
see timer interrupts happening so it will think the cpu is
stuck.

Fix this by touching the NMI watchdog in the cpu idle loop
on non-Niagara machines.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: variables reach -1, but 0 tested
Roel Kluin [Tue, 3 Feb 2009 05:39:02 +0000 (21:39 -0800)]
net: variables reach -1, but 0 tested

while (timeout--) { ... }

timeout becomes -1 if the loop isn't ended otherwise, not 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agolibata: implement HORKAGE_1_5_GBPS and apply it to WD My Book
Tejun Heo [Thu, 29 Jan 2009 11:31:36 +0000 (20:31 +0900)]
libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book

3Gbps is often much more prone to transmission failures.  It's usually
okay to let EH handle speed down after transmission failures but some
WD My Book drives completely shutdown after certain transmission
failures and after it only power cycling can revive them.  Combined
with the fact that external drives often end up with cable assembly
which is longer than usual and more likely to have intervening gender,
this makes these drives very likely to shutdown under certain
configurations virtually rendering them unusable.

This patch implements HOARKGE_1_5_GBPS and applies it to WD My Book
such that 1.5Gbps is forced once the device is identified.

Please take a look at the following bz for related reports.

  http://bugzilla.kernel.org/show_bug.cgi?id=9913

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: add no penalty retry request for EH device handling routines
Tejun Heo [Thu, 29 Jan 2009 11:31:35 +0000 (20:31 +0900)]
libata: add no penalty retry request for EH device handling routines

Let -EAGAIN from EH device handling routines trigger EH retry without
consuming its tries count.  This will be used to implement link SPD
horkage which requires hardreset to adjust SPD without affecting other
EH decisions.  As it bypasses the forward progress guarantee provided
by the tries count, the requester is responsible for ensuring forward
progress.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: improve probe failure handling
Tejun Heo [Thu, 29 Jan 2009 11:31:34 +0000 (20:31 +0900)]
libata: improve probe failure handling

When link is flaky at high speed, it isn't uncommon for a device to
repeatedly fail probing sequence early after successfully negotiating
high link speed.  This often leads to consecutive hotplug events
without successful probing.

This patch improves libata EH such that it remembers probing trials
and if there have been more than two unsuccessful trials in the past
60 seconds, slows down link speed to 1.5Gbps.

As link speed negotiation is the duty of the PHY layer proper, the
goal of this fallback mechanism is to provide the last resort when
everything else fails, which unfortunately happens not too
infrequently, so no fancy 6->3->1.5 speeding down or highest
successful transmission speed seen kind of logics (yet).

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: add @spd_limit to sata_down_spd_limit()
Tejun Heo [Thu, 29 Jan 2009 11:31:33 +0000 (20:31 +0900)]
libata: add @spd_limit to sata_down_spd_limit()

Add @spd_limit to sata_down_spd_limit() so that the caller can specify
the SPD limit it wants.  This parameter doesn't get in the way even
when it's too low.  The closest possible limit is applied.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: clear dev->ering in smarter way
Tejun Heo [Thu, 29 Jan 2009 11:31:32 +0000 (20:31 +0900)]
libata: clear dev->ering in smarter way

dev->ering used to be cleared together with the rest of ata_device in
ata_dev_init() which is called whenever a probing event occurs.
dev->ering is about to be used to track probing failures so it needs
to remain persistent over multiple porbing events.  This patch
achieves this by doing the following.

* Instead of CLEAR_OFFSET, define CLEAR_BEGIN and CLEAR_END and only
  clear between BEGIN and END.  ering is moved after END.  The split
  of persistent area is to allow hotter items remain at the head.

* ering is explicitly cleared on ata_dev_disable() and when device
  attach succeeds.  So, ering is persistent throug a device's life
  time (unless explicitly cleared of course) and also through periods
  inbetween disablement of an attached device and successful detection
  of the next one.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: check onlineness before using SPD in sata_down_spd_limit()
Tejun Heo [Thu, 29 Jan 2009 11:31:31 +0000 (20:31 +0900)]
libata: check onlineness before using SPD in sata_down_spd_limit()

sata_down_spd_limit() should check whether the link is online before
using the SPD value to determine how to limit the link speed.  Factor
out onlineness test and test it from sata_down_spd_limit().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: move ata_dev_disable() to libata-eh.c
Tejun Heo [Thu, 29 Jan 2009 11:31:30 +0000 (20:31 +0900)]
libata: move ata_dev_disable() to libata-eh.c

ata_dev_disable() is about to be more tightly integrated into EH
logic.  Move it to libata-eh.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
15 years agolibata: fix EH device failure handling
Tejun Heo [Thu, 29 Jan 2009 11:31:29 +0000 (20:31 +0900)]
libata: fix EH device failure handling

The dev->pio_mode > XFER_PIO_0 test is there to avoid unnecessary
speed down warning messages but it accidentally disabled SATA link spd
down during configuration phase after reset where PIO mode is always
zero.

This patch fixes the problem by moving the test where it belongs.
This makes libata probing sequence behave better when the connection
is flaky at higher link speeds which isn't too uncommon for eSATA
devices.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>