lintao [Mon, 21 Jul 2014 02:53:43 +0000 (10:53 +0800)]
mmc: rk_sdmmc: compatible with rk312x
zwl [Sun, 20 Jul 2014 11:48:21 +0000 (19:48 +0800)]
rk31xx lcdc: modify some reg defined
zwl [Sun, 20 Jul 2014 11:43:13 +0000 (19:43 +0800)]
rk31xx lvds: create rk31xx lvds driver that is origin version
zwl [Sun, 20 Jul 2014 11:17:21 +0000 (19:17 +0800)]
rk31xx lcdc: create rk31xx lcdc driver that is init version
ljf [Fri, 18 Jul 2014 09:58:28 +0000 (17:58 +0800)]
rk3036: remove fuse check for h.264, invalidate register value in rk3036
lintao [Fri, 18 Jul 2014 08:31:01 +0000 (16:31 +0800)]
mmc: ungate sdmmc
hjc [Fri, 18 Jul 2014 07:11:56 +0000 (15:11 +0800)]
rk3036 hdmi: fix hdmi system ctrl error
陈亮 [Fri, 18 Jul 2014 06:06:40 +0000 (23:06 -0700)]
rk312x.dtsi: add some config(i2c uart pwm watchdog arm-pmu amba)
Zheng Yang [Fri, 18 Jul 2014 05:51:57 +0000 (13:51 +0800)]
rk3036 lcdc: support alpha mode.
li bing [Fri, 18 Jul 2014 02:30:01 +0000 (10:30 +0800)]
rk3036 bt: modify the rk6210's bt gpio and config, normal work.
Zheng Yang [Fri, 18 Jul 2014 02:09:05 +0000 (10:09 +0800)]
rk3036 lcdc: disable standy mode when open layer from stanby mode.
张晴 [Fri, 18 Jul 2014 02:04:19 +0000 (10:04 +0800)]
rk312x:clk:support set clks
张晴 [Fri, 18 Jul 2014 01:50:07 +0000 (09:50 +0800)]
rk3036:clk:modify clk_pll.c error
张晴 [Fri, 18 Jul 2014 01:44:30 +0000 (09:44 +0800)]
rk3036:clk:add others freq,modify apll 1000M by init
hjc [Fri, 18 Jul 2014 01:12:23 +0000 (09:12 +0800)]
rk3038 hdmi: add support interlace video mode
Zheng Yang [Fri, 18 Jul 2014 01:07:04 +0000 (09:07 +0800)]
rk3036 lcdc: fix set win0 virtual width error.
li bing [Fri, 18 Jul 2014 00:45:25 +0000 (08:45 +0800)]
rk3036 wifi: modify driver gpio, sdio_vref and .config.
黄涛 [Thu, 17 Jul 2014 14:23:54 +0000 (22:23 +0800)]
ARM: rockchip: rk3036 add cpu axi bus support
张晴 [Thu, 17 Jul 2014 09:38:39 +0000 (17:38 +0800)]
rk3036:clk:modify init clocks,modify pclk_dbg freq div
陈亮 [Thu, 17 Jul 2014 09:08:29 +0000 (02:08 -0700)]
rk312x: modify ROCKCHIP_CPU_RK3126 to ROCKCHIP_CPU_RK312X, add rk3126 rk3128 DT_MACHINE
Signed-off-by: 陈亮 <cl@rock-chips.com>
ljf [Thu, 17 Jul 2014 08:15:50 +0000 (16:15 +0800)]
rk3036: resolve problem in previous commit
ljf [Thu, 17 Jul 2014 08:10:08 +0000 (16:10 +0800)]
rk3036: enable vpu and hevc, modified vcodec_service adapt to rk3036
陈亮 [Thu, 17 Jul 2014 06:27:27 +0000 (23:27 -0700)]
ARM: rockchip: rk312x: add initial support
luowei [Thu, 17 Jul 2014 03:26:18 +0000 (11:26 +0800)]
spi:modify clk gates for rk3036 spi
hjc [Wed, 16 Jul 2014 11:06:28 +0000 (19:06 +0800)]
rk3036 hdmi: modify driver stength for hdmi CTS
hjc [Wed, 16 Jul 2014 07:41:35 +0000 (15:41 +0800)]
rk3288 hdmi: fix compile error when open HDMI_DEBUG
黄涛 [Wed, 16 Jul 2014 07:01:10 +0000 (15:01 +0800)]
ARM: rockchip: rk3036 add basic pm support
黄涛 [Wed, 16 Jul 2014 06:58:06 +0000 (14:58 +0800)]
ARM: rockchip: common.h add rk_last_log_text
wdc [Wed, 16 Jul 2014 06:50:41 +0000 (14:50 +0800)]
3036: add ion reverse
Zheng Yang [Wed, 16 Jul 2014 06:47:28 +0000 (14:47 +0800)]
rk3036 lcdc: fix yuv format define error.
黄涛 [Wed, 16 Jul 2014 06:07:49 +0000 (14:07 +0800)]
ARM: rockchip: rk3036-sdk.dts add dummy key
黄涛 [Wed, 16 Jul 2014 06:03:10 +0000 (14:03 +0800)]
input: keyboard: rk_keys: allow work without any key defined
黄涛 [Wed, 16 Jul 2014 05:00:42 +0000 (13:00 +0800)]
ASoC: rockchip: rk30_i2s.c use pinctrl_pm_select_sleep_state
call pinctrl_select_state could trigger Oops when suspend
if pinctrl no configured.
wdc [Wed, 16 Jul 2014 03:22:24 +0000 (11:22 +0800)]
3036: disable sdmmc for uart
hjc [Tue, 15 Jul 2014 11:03:02 +0000 (19:03 +0800)]
rk3036 hdmi: rk3036 hdmi driver independent from rk616
lintao [Tue, 15 Jul 2014 09:25:28 +0000 (17:25 +0800)]
mmc: rk_sdmmc:
(1) auto select edma/idma by Soc chip id
(2) enable rk3036-sdk sd & sdio
黄涛 [Tue, 15 Jul 2014 09:19:35 +0000 (17:19 +0800)]
ARM: rockchip: rk3036.dtsi make gpu clk always on
黄涛 [Tue, 15 Jul 2014 09:05:33 +0000 (17:05 +0800)]
Revert "rockchip:mali400:tmp not disable mali clk ,enable mali runtime pm"
This reverts commit
8c503dc354b3c68f8d069be96e2f687d23fabd4c.
xxm [Tue, 15 Jul 2014 07:15:26 +0000 (15:15 +0800)]
rockchip:mali400:mali400 built-in kernel
xxm [Tue, 15 Jul 2014 07:02:15 +0000 (15:02 +0800)]
rockchip:mali400:tmp not disable mali clk ,enable mali runtime pm
hjc [Tue, 15 Jul 2014 06:28:06 +0000 (14:28 +0800)]
rk3036 hdmi: fix hdmi init clear hdp interrupt
hjc [Tue, 15 Jul 2014 01:05:29 +0000 (09:05 +0800)]
rk3036 hdmi: init hdmi before request irq
wdc [Mon, 14 Jul 2014 13:43:34 +0000 (21:43 +0800)]
3036: fix boot mode register
黄涛 [Mon, 14 Jul 2014 11:29:34 +0000 (19:29 +0800)]
ARM: rockchip: indent rk3036.c
黄涛 [Mon, 14 Jul 2014 11:02:39 +0000 (19:02 +0800)]
ARM: rockchip: rk3036_defconfig set PANIC_TIMEOUT=0 for debug
hjc [Mon, 14 Jul 2014 10:44:56 +0000 (18:44 +0800)]
rk3036 hdmi: fix hdmi edid read error
li bing [Mon, 14 Jul 2014 02:20:32 +0000 (10:20 +0800)]
wifi: add esp8089's code.
wdc [Mon, 14 Jul 2014 02:22:57 +0000 (10:22 +0800)]
3036: remove usb uart config
lyz [Sat, 12 Jul 2014 11:02:46 +0000 (19:02 +0800)]
3036: usb: fix wrong address
wdc [Sat, 12 Jul 2014 09:07:27 +0000 (17:07 +0800)]
3036: fix build error
wdc [Sat, 12 Jul 2014 08:32:35 +0000 (16:32 +0800)]
Merge branch 'develop-3.10-next' of ssh://10.10.10.29/rk/kernel into develop-3.10-next
wdc [Sat, 12 Jul 2014 08:31:59 +0000 (16:31 +0800)]
3036: enable usb bypass
hjc [Sat, 12 Jul 2014 07:46:17 +0000 (15:46 +0800)]
rk3036 hdmi: use irq to trigger hdmi mode change
wdc [Sat, 12 Jul 2014 07:54:43 +0000 (15:54 +0800)]
3036: remove uart0 & bluetooth
wdc [Sat, 12 Jul 2014 07:53:45 +0000 (15:53 +0800)]
Revert "3036: open usb uart init"
This reverts commit
3925d5e56b2f82bb81b554d74f0a36158c012506.
黄涛 [Sat, 12 Jul 2014 07:31:54 +0000 (15:31 +0800)]
mali400: fix rk3036 init
rk3036 don't support power manager
wdc [Sat, 12 Jul 2014 07:24:39 +0000 (15:24 +0800)]
3036: open usb uart init
黄涛 [Sat, 12 Jul 2014 07:17:32 +0000 (15:17 +0800)]
mali400: mali_osk_mali: fix get irq with dts
Zheng Yang [Sat, 12 Jul 2014 07:04:42 +0000 (15:04 +0800)]
Merge branch 'develop-3.10-next' of ssh://10.10.10.29/rk/kernel into develop-3.10-next
Zheng Yang [Sat, 12 Jul 2014 07:03:35 +0000 (15:03 +0800)]
rk3036:
fb: load_screen is called once in function rk_fb_switch_screen().
tve: fix 7.5 IRE configure error for NTSC and PAL.
wdc [Sat, 12 Jul 2014 06:57:51 +0000 (14:57 +0800)]
3036: fix hym gpio judgement
wdc [Sat, 12 Jul 2014 06:38:33 +0000 (14:38 +0800)]
3036: fix rtc-HYM8563 without irq pin
Zheng Yang [Sat, 12 Jul 2014 06:31:03 +0000 (14:31 +0800)]
rk3036 tve: delete debug log.
Zheng Yang [Sat, 12 Jul 2014 06:27:59 +0000 (14:27 +0800)]
rk3036 tv encoder is ok.
hjc [Sat, 12 Jul 2014 06:04:44 +0000 (14:04 +0800)]
rk3036 hdmi: hdmi display ok
张晴 [Sat, 12 Jul 2014 04:52:39 +0000 (12:52 +0800)]
rk3036:clk:modify init clocks
黄涛 [Sat, 12 Jul 2014 03:50:00 +0000 (11:50 +0800)]
ARM: rockchip: rk3036_defconfig select MMC_DW_IDMAC
黄涛 [Sat, 12 Jul 2014 03:46:34 +0000 (11:46 +0800)]
ARM: rockchip: rk3036_defconfig set LOG_BUF_SHIFT=17
黄涛 [Sat, 12 Jul 2014 03:42:13 +0000 (11:42 +0800)]
ARM: rockchip: add rk3036_defconfig
Zheng Yang [Sat, 12 Jul 2014 03:30:09 +0000 (11:30 +0800)]
Merge branch 'develop-3.10-next' of ssh://10.10.10.29/rk/kernel into develop-3.10-next
Zheng Yang [Sat, 12 Jul 2014 03:29:03 +0000 (11:29 +0800)]
rk3036 lcdc&tve: fix driver load error.
luowei [Sat, 12 Jul 2014 02:16:30 +0000 (10:16 +0800)]
pinctrl:add dts definition for nandc
Zhaoyifeng [Sat, 12 Jul 2014 02:09:58 +0000 (10:09 +0800)]
nand driver:
add nand reg config for emmc read sn and verdor info.
Zhaoyifeng [Sat, 12 Jul 2014 01:42:18 +0000 (09:42 +0800)]
nand driver: enable nand config in dts.
wdc [Fri, 11 Jul 2014 13:24:14 +0000 (21:24 +0800)]
3036: disbale emcc,sdio,sdmmc temporatly
wdc [Fri, 11 Jul 2014 13:18:24 +0000 (21:18 +0800)]
3036: add ion at dtsi
wdc [Fri, 11 Jul 2014 13:12:10 +0000 (21:12 +0800)]
3036: fix i2c1-gpio error
wdc [Fri, 11 Jul 2014 13:02:13 +0000 (21:02 +0800)]
3036: remove usb bypass func temporarily
wdc [Fri, 11 Jul 2014 10:52:28 +0000 (18:52 +0800)]
3036: fix iomap base addr error
hjc [Wed, 9 Jul 2014 00:59:23 +0000 (08:59 +0800)]
rk3036 hdmi: fix HPD status reg change
lyz [Fri, 11 Jul 2014 09:42:24 +0000 (17:42 +0800)]
usb-uart: fix compiler warning
arch/arm/mach-rockchip/rk3036.c: In function 'usb_uart_init':
arch/arm/mach-rockchip/rk3036.c:87:9: warning: unused variable
luowei [Fri, 11 Jul 2014 09:10:21 +0000 (17:10 +0800)]
pinctrl:delete unused definition for rk3036
luowei [Thu, 10 Jul 2014 14:44:20 +0000 (22:44 +0800)]
pinctrl:add rk3036 handler in pinctrl driver
Zheng Yang [Thu, 10 Jul 2014 09:13:56 +0000 (17:13 +0800)]
rk3036 lcdc:
1. fix some register define error.
2. disable mmu.
黄涛 [Thu, 10 Jul 2014 06:32:57 +0000 (14:32 +0800)]
cpufreq: rockchip-cpufreq: add ARM_ROCKCHIP_CPUFREQ config
黄涛 [Thu, 10 Jul 2014 06:10:23 +0000 (14:10 +0800)]
input: keyboard: rk_keys: allow work without ADC
lyz [Thu, 10 Jul 2014 01:38:50 +0000 (09:38 +0800)]
usb: rk3036: updata soft-reset
1.rename platform dev name to 3036
2.fix dts err
3.follow new soft reset framework
黄涛 [Thu, 10 Jul 2014 01:22:27 +0000 (09:22 +0800)]
Merge remote-tracking branch 'origin/develop-3.10' into develop-3.10-next
Conflicts:
drivers/usb/dwc_otg_310/usbdev_rk.h
陈亮 [Wed, 9 Jul 2014 11:30:00 +0000 (04:30 -0700)]
remove reboot_config_done flag, do not close ddrfreq thread after reboot notify, because that may cause ddrfreq_system_status_notifier_call block forever
Signed-off-by: 陈亮 <cl@rock-chips.com>
lintao [Wed, 9 Jul 2014 10:08:47 +0000 (18:08 +0800)]
mmc: support drv_e and sr modify
张晴 [Wed, 9 Jul 2014 08:50:25 +0000 (16:50 +0800)]
rk3036:clk:rename clk_core_pre to clk_core
Zhaoyifeng [Wed, 9 Jul 2014 07:22:14 +0000 (15:22 +0800)]
nand driver:modify rk3036 nand clk config in dtsi.
wdc [Wed, 9 Jul 2014 07:19:47 +0000 (15:19 +0800)]
3036: start secondary_startup
张晴 [Wed, 9 Jul 2014 07:16:58 +0000 (15:16 +0800)]
rk3288:tsadc:slove pull down power_hold when power on
lyz [Mon, 7 Jul 2014 11:24:02 +0000 (19:24 +0800)]
usb: update soft reset
1.add rst_flag to distinguish different reset cases
2.use new reset framework APIs
张晴 [Wed, 9 Jul 2014 00:55:04 +0000 (08:55 +0800)]
rk3036:clk:modify init clocks
许盛飞 [Tue, 8 Jul 2014 11:43:32 +0000 (19:43 +0800)]
rk3036: add pwm-pinctrl
Zheng Yang [Tue, 8 Jul 2014 10:11:59 +0000 (18:11 +0800)]
rk3036: add tv encoder code.
wdc [Tue, 8 Jul 2014 07:33:03 +0000 (15:33 +0800)]
3036: update i2c gpio
dkl [Tue, 8 Jul 2014 06:24:17 +0000 (14:24 +0800)]
reset: rk3036: add rk3036 reset-controller support