Programming Languages Research Group: Git - firefly-linux-kernel-4.4.55.git/log

iio: imu: inv_mpu6050: Add i2c mux for by pass

This chip allows some limited number of sensors connected to it as
slaves, which can be directly accessed by register interface of this
driver.But the current upstream driver doesn't support such mode.
To attach such slaves to main processor i2c bus, chip has to be set
up in bypass mode. This change adds i2c mux, which will enable/disable
this mode for transaction to/from such slave devices.
This was discussed for a while in mailing list, this was the outcome:
Reference:
http://www.spinics.net/lists/linux-iio/msg12126.html
http://comments.gmane.org/gmane.linux.kernel.iio/11470

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: bmp280: refactor compensation code

This version of the code avoids extra memory copy operations and is
somewhat smaller in code size.

Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: common: remove unnecessary sizeof(u8)

sizeof(u8) is always 1.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: ak8975: add ak09911 and ak09912 support

Add 2 new definition entries to support ak0991x compass.
Add a more advanced function to check we are dealing with the
expected device.
Remove standalone driver for ak09911.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: ak8975: add definition structure per compass type

For each type of compass supported (AK8975 and AK8963),
add a definition structure for register masks, important registers,
raw data interpretation.
This change will make integrating new type of devices easier.

Remove i2c register cache. It is only used for one single register.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: ak8975: minor fixes

Fixes code duplication, return of function.
Check client->irq properly when setting up optional irq handler.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers:staging:iio: fix checkpatch complaint about space before comma

Fixes:
drivers/staging/iio/adc/ad7192.c:615: ERROR: space prohibited before that ','
drivers/staging/iio/meter/ade7759.c:119: ERROR: space prohibited before that ','

Signed-off-by: Zachary Warren <conflatulence@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: event_monitor: Add support for new channel types

We have the following testing scenario:

$ insmod iio_dummy_evgen.ko
$ insmod iio_dummy.ko

./iio_event_monitor /dev/iio:device0
Event: time: 1412786467971335337, type: activity(running), channel: 0,
evtype: thresh, direction: rising
Event: time: 1412786530792974091, type: activity(walking), channel: 0,
evtype: thresh, direction: falling
Event: time: 1412764319184761765, type: steps, channel: 0, evtype: instance

$ echo 1 > /sys/bus/iio/devices/iio_evgen/poke_ev0
$ echo 2 > /sys/bus/iio/devices/iio_evgen/poke_ev0
$ echo 3 > /sys/bus/iio/devices/iio_evgen/poke_ev0

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: dummy: Demonstrate the usage of new channel types

Adds support for the new channel types in the dummy driver:
  * a new channel IIO_ACTIVITY
  * two state transition events (running and walking)
  * a new channel IIO_STEPS and support for reading and writing
    pedometer step counter
  * step detect event
  * a new IIO_CHAN_INFO_CALIBHEIGHT mask bit for reading and writing
    user's height.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: core: Introduce IIO_CHAN_INFO_CALIBHEIGHT

Some devices need the height of the user to compute various
parameters. One of this devices is Freescale's MMA9553L
(http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf)
that needs the height of the user to compute the stride length which
is used further to determine distance, speed and activity type.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: core: Introduce STEPS channel, ENABLE mask and INSTANCE event

These changes are needed to support the functionality of a pedometer.
A pedometer has two basic functionalities: step counter and step detector.

The step counter needs to be enabled and then it will count the steps
in its hardware register. Whenever the application needs to check
the step count, it will read the step counter register. To support the
step counter a new channel type STEPS is added. Since the pedometer needs
to be enabled first so that the hardware can count and store the steps,
we need a specific ENABLE channel info mask.

The step detector will generate an interrupt each time a step is detected.
To support this functionality we add a new event type INSTANCE.

For more information on the Android requirements for step counter and step
detector see:
http://source.android.com/devices/sensors/composite_sensors.html#counter
and http://source.android.com/devices/sensors/composite_sensors.html#detector.

A device that has the pedometer functionality this interface needs to
support is Freescale's MMA9553L:
http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: core: Introduce IIO_EV_DIR_NONE

For some events (e.g.: step detector) a direction does not make sense.

Add IIO_EV_DIR_NONE to be used with such events and generate sysfs event
attributes that do not contain direction.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: core: Introduce IIO_ACTIVITY channel

This channel will be used for exposing information about
activity composite sensors. Activities supported so far:
* running
* jogging
* walking
* still

THRESHOLD event is used to signal a change in the activity
state.

We associate a confidence interval for each activity expressed
as a percentage from 0 to 100.
  * 0, means the sensor IS NOT reporting that activity.
  * 100, means the sensor IS reporting that activity.

Users of this interface have two possible means to gather
information about the ongoing activities.

1. Event based, via event file descriptor
  * sensor may report an event when ENTERING an activity or LEAVING
    an activity based on a threshold value.
  * drivers will wake up applications waiting data on the event fd

2. Polling, by reading the sysfs associated attribute files:
  * /sys/bus/iio/devices/iio:device0/in_activity_running_input
expressed as percentage confidence value from 0 to 100.

This will offer an interface for Android significant motion
composite sensor defined here:
http://source.android.com/devices/sensors/composite_sensors.html

Activities listed above are supported by Freescale's MMA9553 sensor:
http://freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: dummy: Add virtual registers for dummy device

We need a way to store events generated by iio_dummy_evgen module,
in order to correctly process IRQs in iio_simple_dummy_events.

For the moment, we add two registers:

* id_reg - ID register, stores the source of the event
* id_data - DATA register, stores the type of the event

e.g echo 4 > /sys/bus/iio/devices/iio_evgen/poke2

id_reg 0x02, id_data 0x04

This means, event of type 4 was generated by fake device 2.

We currently use a hardcoded mapping of virtual events to IIO events.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: Add support for Kionix KMX61 sensor

Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports
raw accel/magn readings together with scale and sampling frequency.

Datasheet will be available at:
http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

MAINTAINERS: Add IIO include files

Files under include/linux/iio were not reported as part
of the IIO subsystem.

Reported-by: Cristina Ciocan <cristina.ciocan@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:kxcjk-1013: Add support for SMO8500 device

The Onda v975w tablet contains an accelerometer that's advertised over
ACPI as SMO8500. This device is however a KXCJ9 accelerometer as
can be seen in the Windows driver's INF file, and from the etching on
the chipset ("KXCJ9 41566 0414").

This patch also removes the attempt to get the IRQ for the "data ready"
signal, as it does not seem to be supported by this device on this
platform.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: jsa1212: Add JSA1212 proximity/ALS sensor

This patch adds a new driver for solteam opto JSA1212 proximity and
ambient light sensor.

Basic details of the chip can be found here.

http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: comedi: das800: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_AiActualScan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

The function v_APCI3120_InterruptDmaMoveBlock16bit() is then just a wrapper
for comedi_buf_write_samples(). Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: use comedi_async 'scans_done' to detect AI EOA

Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.

Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when the EOA occurs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: use comedi_async 'scans_done' to detect AO EOA

Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use comedi_async 'scans_done' to detect AI EOA

Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.

Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when the EOA occurs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use comedi_async 'scans_done' to detect AO EOA

Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Also, remove the unnecessary COMEDI_CB_EOS event. The core automatically
detects and adds that event.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'stop_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: remove private data member 'ai_act_chan'

This member of the private data is set to '0' but never used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'ntrig' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'stopcount' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: use comedi_async 'scans_done' to detect EOA

Remove the private data member 'stop_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: add 'scans_done' member to comedi_async

Introduce a new member to comedi_async to count the number of scans completed.
This member is cleared by comedi_buf_reset() along with the other comedi_async
members. It is incremented in comedi_inc_scan_progress() when the end of scan
is detected.

This member will be used to clean up the scan counting in the comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: Fix single-open policy race condition

Fix the implementation of a single-open policy for both
devices (lcd and keypad) by using atomic_t instead of plain ints.

Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: change tx wake queue

Wake queue in the dwIsr loop of device_intr instead of device_tx_srv.

This fixes an issue when ISR_TXDMA0 or ISR_AC0DMA does not occur
device_tx_srv is not called and the queue gets stuck in stopped
condition.

On test if the queue is stuck another MACvTransmitAC0 or MACvTransmit0
in vnt_tx_packet will clear it.

Check on vif that both buffers are available and the queue is stopped.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: remove old FSF address from license text

Linux already includes a copy of the GPL, checkpatch compains about the address.
Remove it from the license text.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add ioctls to set per-file read and write subdevice

Now that Comedi has the structures in place to support setting the
current "read" and/or "write" subdevice on a per-file object basis, add
new ioctls to set them. The newly chosen "read" ("write") subdevice
needs to support "read" ("write") commands, and the file cannot be busy
handling a "read" ("write") command on the previous subdevice (if any).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: prepare support for per-file read and write subdevices

Comedi devices may have several subdevices that support "read" and/or
"write" asynchronous commands that use the "read" or "write" file
operations for data transfer.  The low-level Comedi drivers may nominate
a default "read" subdevice and/or a default "write" subdevice, but it
may have other subdevices that support asynchronous commands.

The Comedi core provides a somewhat clunky mechanism to provide access
to the asynchronous command support of the non-default subdevices.  When
a low-level device is "attached" to a core Comedi device, it dynamically
allocates a minor device number for each of the subdevices that support
asynchrounous commands and associates them with files created in SysFS
named "comediX_subdY", where "X" is the minor device number of the main
comedi device, and "Y" is the subdevice number.  An application can open
these subdevice-specific files and they behave like the regular
"comediX" files except that the "read" and/or "write" subdevice may be
different to the default chosen by the low-level driver.

This patch adds a layer of indirection between the file object and the
comedi device object to allow the current "read" and/or "write"
subdevice to be altered after opening the Comedi device, on a per-file
object basis.  The advantage is that an application only needs to open
the main Comedi device file and can then choose which subdevice it wants
to "read" or "write".  The main Comedi device file can be opened more
than once, and each file object can choose the "read" and "write"
subdevices independently.

The new `struct comedi_file` is created on "open" and freed on
"release".  It includes pointers to the main Comedi device structure,
and to the current "read" and "write" subdevice structures (which may be
NULL).  It also has information to keep track of when a low-level device
has been attached or detached since the previous time the file object
was used.  In that case, the current "read" and "write" subdevices in
the `struct comedi_file` will be changed to the new defaults (or set to
NULL).  (The change to new defaults is done by `comedi_file_reset()`.
The checking for attach/detach is done by `comedi_file_check()` which
will call `comedi_file_reset()` if there have been any attach/detach
operations since the previous call.)

A subsequent patch will add the ioctls to change the current "read" and
"write" subdevices.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: modify print calls

This patches replaces one pr_debug call by dev_dbg and
changes the device used by one of the dev_err calls.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unnecessary function

The dgap_init_global() initialize the dgap_board
that is a global variable as static and dgap_poll_timer.
But init_timer() is called twice in dgap_start() and dgap_board
doesn't need to be initialized to NULL.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655 baseband.c camel case replace pDevice -> priv

for struct vnt_private

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device.h remove dead member wstats

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_set_options remove dead variables

uConnectionRate
wRTSThreshold
byOpMode
b11hEnable
uChannel

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: baseband.c/h remove dead functions

These functions are not used so remove them
BBbIsRegBitsOn
BBbIsRegBitsOff
BBvReadAllRegs
BBvLoopbackOn
BBvLoopbackOff

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_init_registers remove uConnectionRate

The device starts up with a default rate of 54M

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_set_options remove unused ethernet addresses

Removing these variables
abyBroadcastAddr
abySNAP_RFC1042
abySNAP_Bridgetunnel

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_get_options remove unused device parameters

IP_byte_align
Channel
PreambleType
RTSThreshold
ConnectionRate
OPMode
b80211hEnable

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove fragmentation from driver

fragmentation is now handled by mac80211.

Remove functions
device_alloc_frag_buf
device_init_defrag_cb
device_free_frag_buf

Removing
typedef struct tagSDeFragControlBlock
frag_thresh
sRxDFCB
cbDFCB;
cbFreeDFCB;
uCurrentDFCBIdx;

macros
FRAG_THRESH_MIN
FRAG_THRESH_MAX

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: mac.c and mac.h remove dead functions.

MACvReadAllRegs
MACbyReadMultiAddr
MACvWriteMultiAddr
MACvSetMultiAddrByHash
MACvResetMultiAddrByHash
MACvSetRxThreshold
MACvGetRxThreshold
MACvSetTxThreshold
MACvGetTxThreshold
MACvSetDmaLength
MACvGetDmaLength
MACvGetLongRetryLimit
MACbIsInLoopbackMode
MACbCompareContext
MACvOneShotTimer0MicroSec
MACbTxDMAOff
MACvClearBusSusInd
MACvEnableBusSusEn
MACbFlushSYNCFifo
MACvSetDefaultKeyEntry
MACvEnableDefaultKey
MACvDisableDefaultKey
MACvSetDefaultTKIPKeyEntry
MACvSetDefaultKeyCtl

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: mac.c/h remove member type comments

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: mac remove dead variable TxRate_iwconfig

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused functions from uislib.c

Delete uislib_client_add_vnic() and uislib_client_delete_vnic(), since these
are never used.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove extra blank lines from virthba files

This patch removes extra blank lines from the virthba header and source
files. This is the first of a set of patches that will clean up the
virthba source file. The only checkpatch issue in the header file was
the blank line warnings.

Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Ben Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: virtpci: Remove GET_BUS_DEV macro

The GET_BUS_DEV macro contained flow control statements that are undesirable.
This patch removes the macro and places the code in each function.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: refactor visorutil_mod_init()

Fix the function name declaration so it is just one line, and add the missing
brackets to the else clause in the if statement.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: refactor visorutil_spar_detect()

Fix the declaration line so it is just one single line, and add the missing
brackets on the else clause in the if statement.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in visorkmodutils.c

Remove all the extraneous blank lines from visorkmodutils.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix bracketing in visor_periodic_work_stop()

The last if statement in this function is missing brackets on the else
clause. Add them.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in periodic_work.c

Get rid of all extraneous blank lines in periodic_work.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix sizeof() in visor_memregion_create_overlapped()

Use the variable name rather than the type in the sizeof() call in this
function.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix line over 80 characters in mapit()

The error output in mapit() in memregion_direct.c has variables past the 80
character limit. Move them to the next line, but the string constant will still
go past the limit, and that's okay.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove extra blank lines in memregion_direct.c

Get rid of the extra blank lines in this file.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unnecessary spaces in casts in memregion_direct.c

Get rid of all extra spaces between casts and their targets in this file.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: refactor visor_memregion_create()

Fix the sizeof() so it uses the variable name rather than the type, fix the
argument alignment to the kzalloc(), and rename the goto label.

Away => cleanup

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove typedef for MEMREGION

Remove the typedef for this structure and just use struct memregion instead.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: split double assignment in visor_charqueue_create()

Split up the doubled assignment in visor_charqueue_create() into two separate
assignments.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: refactor CHARQUEUE

Remove the typedef and just use struct charqueue instead. Update all references.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix line spacing in charqueue.c

Clean up the extraneous blank lines in charqueue.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.19a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7

New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
  scaled humidity, RGBC intensity gain factor and scale applied to
  differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
  device tree.
* Add -g parameter to generic_buffer example to allow for devices with
  directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.

Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
  functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.

iio: Add ABI documentation for scaled voltage

This patch adds an entry in ABI documentation for in_voltage-voltage_scale.
It has at least one user driver, adis16220, in accel driver.

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:pressure:bmp280: fix pressure calculation

According to the datasheet and as defined in struct bmp280_comp_press, dig_p1 is
of type u16, while dig_p2 to dig_p9 are of type s16. In
bmp280_read_compensation_press(), values read from the device were treated as
the wrong type.
In bmp280_read_press() the fractional part of the measured pressure is
calculated wrong. A better way is to use *val for the raw pressure and *val2 for
the quotient and let the core do the proper conversion using IIO_VAL_FRACTIONAL.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: exynos_adc: Add support for exynos7

The ADC on exynos7 is quite similar to ADCv2. The differences are as
follows:
- exynos7-adc has 8 input channels (as against 10 in ADCv2).
- exynos7 does not include an ADC PHY control register.
- Some ADC_CON2 register bits being used in ADCv2 are listed as
reserved in exynos7-adc. This results in a different init_hw
function for exynos7.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

ARM: dts: exynos: Add sysreg phandle to ADC node

Instead of using the ADC_PHY register base address, use sysreg phandle
in ADC node to control ADC_PHY configuration register.

This patch adds syscon node for Exynos3250, Exynos4x12, Exynos5250,
and Exynos5420, Exynos5800.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Documentation: dt-bindings: update exynos-adc.txt with syscon handle

This patch updates the DT bindings for ADC in exynos-adc.txt with the
syscon phandle to the ADC nodes.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: devicetree@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: exyno-adc: use syscon for PMU register access

This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: Add notrigger mode for generic_buffer

Some IIO devices do not use the triggers. This patch makes trigger setting
conditional so generic_buffer can be used when triggers are disabled.

Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: as3935: Remove unnecessary semicolons

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: rtl8188eu: Fix coding style space related ERROR problems

This fixes space related ERROR reports by checkpatch.pl
Generated by $ git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING
Already checked by text comparasion
$git diff -w
and binary comparasion of r8188eu.ko
$objdiff diff <old_commit> <new_commit>

Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: Logging message neatening

Use a more common logging style.

o Convert DEBUG macros to pr_debug
o Add pr_fmt
o Remove embedded function names from pr_debug
o Convert printks to pr_<level>
o Coalesce formats and align arguments
o Add missing terminating newlines

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: Whitespace neatening

Use normal kernel style, indentation and alignment.

git diff -w shows no difference

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: comedi_bond.c: Remove unneeded #define

Remove unneeded #define. This was previously included in a patch set
two but patchset one was taken by mistake.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use sample manipulation helpers

Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove use of 'bytes_per_sample()'

This inline helper function has been replaced with comedi_bytes_per_sample().
The same commit (bf33eb4b4f57) introduced a couple other related helper
functions a manipulate the sample size.

Use the new helper functions to remove the use of 'bytes_per_sample()' and
remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove private data 'ai_scan_pos'

This member of the private data is replicating what the comedi_async
'cur_chan' member is used for. Use that instead and remove the private
data member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: move comedi_async 'cur_chan' tracking into the core

The commedi_async 'cur_chan' member is used to track the current position
in the chanlist for a scan. Currently only a couple comedi drivers use
this member.

For aeshtetics, move the 'cur_chan' tracking into the core for non-SDF_PACKED
subdevices. The 'cur_chan' will be updated after reading or writing samples
to the async buffer by comedi_inc_scan_progress(). All non-SDF_PACKED subdevices
will then automatiaclly track the 'cur_chan'.

Some of the drivers use the 'cur_chan' to detect the end of scan event when
counting scans. The COMEDI_CB_EOS event is automatically added by the core
when the end of scan is detected. The drivers just need to check if the
'cur_chan' is 0 to count the number of scans completed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove unused variable in ni_ao_fifo_load()

The local variable 'range' is set but never used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: correct insn_bits returned data for DO

For some unfathomable reason, the Comedi `insn_bits` handler for the
digital output subdevice (`icp_multi_insn_bits_do()`) writes the digital
output register and reads back the unrelated digital input register.
Read back the current state of the outputs (held in `s->state`) instead.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove private data 'chan_is_bipolar' member

Currently this driver uses a bitmap in the private data to keep track of
the unipolar/bipolar range for each channel. This is needed to determine
if the data needs to be munged for bipolar samples.

Remove this member from the private data and use the comedi core helper
function comedi_range_is_bipolar() to determine if the data needs to be
munged.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: fix ai_read_n() async->cur_chan use

This functions uses the async->cur_chan to determine if the current channel
is using a bipolar range and the sample needs to be munged. The cur_chan is
never incremented so all the samples are munged based on the fist channel
in the cmd->chanlist.

Bump the cur_chan after writing each sample. This fixes the code so that
the munging will be done correctly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>