ata_piix: IDE Mode SATA patch for Intel Cougar Point DeviceIDs

commit 88e8201e67aace3d86de9e75122ea525f0e7248e upstream.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: hda - enable snoop for Intel Cougar Point

commit 32679f95cac3b1bdf27dce8b5273e06af186fd91 upstream.

This patch enables snoop, eliminating static during playback.
This patch supersedes the previous Cougar Point audio patch.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: hda_intel: ALSA HD Audio patch for Intel Cougar Point DeviceIDs

commit d2f2fcd2541bae004db7f4798ffd9d2cb75ae817 upstream.

This patch adds the Intel Cougar Point (PCH) HD Audio Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86/PCI: irq and pci_ids patch for Intel Cougar Point DeviceIDs

commit 93da6202264ce1256b04db8008a43882ae62d060 upstream.

This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IPoIB: Fix TX queue lockup with mixed UD/CM traffic

commit f0dc117abdfa9a0e96c3d013d836460ef3cd08c7 upstream.

The IPoIB UD QP reports send completions to priv->send_cq, which is
usually left unarmed; it only gets armed when the number of
outstanding send requests reaches the size of the TX queue. This
arming is done only in the send path for the UD QP.  However, when
sending CM packets, the net queue may be stopped for the same reasons
but no measures are taken to recover the UD path from a lockup.

Consider this scenario: a host sends high rate of both CM and UD
packets, with a TX queue length of N.  If at some time the number of
outstanding UD packets is more than N/2 and the overall outstanding
packets is N-1, and CM sends a packet (making the number of
outstanding sends equal N), the TX queue will be stopped.  When all
the CM packets complete, the number of outstanding packets will still
be higher than N/2 so the TX queue will not be restarted.

Fix this by calling ib_req_notify_cq() when the queue is stopped in
the CM path.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: fix nested spinlock hang in aer_inject

commit bd1f46deba615971a58193afd0202878cadf19a7 upstream.

The aer_inject module hangs in aer_inject() when checking the device's
error masks.  The hang is due to a recursive use of the aer_inject lock.
The aer_inject() routine grabs the lock while processing the error and then
calls pci_read_config_dword to read the masks. The pci_read_config_dword
routine is earlier overridden by pci_read_aer, which among other things,
grabs the aer_inject lock.

Fixed by moving the pci_read_config_dword calls to read the masks to before
the lock is taken.

Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCI: kill off pci_register_set_vga_state() symbol export.

commit ded1d8f29b4d315a2093cafc3ee17ac870a87972 upstream.

When pci_register_set_vga_state() was made __init, the EXPORT_SYMBOL() was
retained, which now leaves us with a section mismatch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pci: Update pci_set_vga_state() to call arch functions

commit 95a8b6efc5d07103583f706c8a5889437d537939 upstream.

Update pci_set_vga_state to call arch dependent functions to enable Legacy
VGA I/O transactions to be redirected to correct target.

[akpm@linux-foundation.org: make pci_register_set_vga_state() __init]
Signed-off-by: Mike Travis <travis@sgi.com>
LKML-Reference: <201002022238.o12McE1J018723@imap1.linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Robin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SCSI: fc-transport: Use packed modifier for fc_bsg_request structure.

commit eda05a28ec52be40086400a1b606d211276f0e41 upstream.

The 32bit kernel does not add padding bytes in the fc_bsg_request structure
whereas the 64bit kernel adds padding bytes in the fc_bsg_request structure.
Due to this, structure elements gets mismatched with 32bit application and
64bit kernel.To resolve this, used packed modifier to avoid adding padding bytes.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

vgaarb: Fix VGA arbiter to accept PCI domains other than 0

commit 773a38dbdad03474c5ee235f7d9bf9f51c9e3c2b upstream.

Update the VGA Arbiter to accept PCI Domains other than 0.

Signed-off-by: Mike Travis <travis@sgi.com>
LKML-Reference: <201002022238.o12McFe8018730@imap1.linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Robin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

PCIe AER: prevent AER injection if hardware masks error reporting

commit b49bfd32901625e4adcfee011d2b32a43b4db67d upstream.

The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER
driver which will controls the reporting of individual errors to PCIe RC
via PCIe error messages.

If hardware masks special error reporting to RC, the aer_inject driver
should not inject aer error.

Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Acked-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

igb: add support for 82576NS SerDes adapter

commit 747d49baaf4e3f4ad5ae77477830da026eeef69d upstream.

This patch adds the device ID necessary to support the 82576NS SerDes
adapter.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SCSI: add scsi target reset support to scsi ioctl

commit 3f9daedfcb197d784c6e7ecd731e3aa9859bc951 upstream.

The scsi ioctl code path was missing scsi target reset
support. This patch just adds it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fc class: fail fast bsg requests

commit 2bc1c59dbdefdb6f9767e06efb86bbdb2923a8be upstream.

If the port state is blocked and the fast io fail tmo has
fired then this patch will fail bsg requests immediately.
This is needed if userspace is sending IOs to test the transport
like with fcping, so it will not have to wait for the dev loss tmo.
With this patch he bsg req fast io fail code behaves like the normal
and sg io/passthrough fast io fail.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-By: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9p: Skip check for mandatory locks when unlocking

commit f78233dd44a110c574fe760ad6f9c1e8741a0d00 upstream.

While investigating a bug, I came across a possible bug in v9fs. The
problem is similar to the one reported for NFS by ASANO Masahiro in
http://lkml.org/lkml/2005/12/21/334.

v9fs_file_lock() will skip locks on file which has mode set to 02666.
This is a problem in cases where the mode of the file is changed after
a process has obtained a lock on the file. Such a lock will be skipped
during unlock and the machine will end up with a BUG in
locks_remove_flock().

v9fs_file_lock() should skip the check for mandatory locks when
unlocking a file.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ocfs2: Change bg_chain check for ocfs2_validate_gd_parent.

commit 78c37eb0d5e6a9727b12ea0f1821795ffaa66cfe upstream.

In ocfs2_validate_gd_parent, we check bg_chain against the
cl_next_free_rec of the dinode. Actually in resize, we have
the chance of bg_chain == cl_next_free_rec. So add some
additional condition check for it.

I also rename paramter "clean_error" to "resize", since the
old one is not clearly enough to indicate that we should only
meet with this case in resize.

btw, the correpsonding bug is
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1230.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ocfs2: set i_mode on disk during acl operations

commit fcefd25ac89239cb57fa198f125a79ff85468c75 upstream.

ocfs2_set_acl() and ocfs2_init_acl() were setting i_mode on the in-memory
inode, but never setting it on the disk copy. Thus, acls were some times not
getting propagated between nodes. This patch fixes the issue by adding a
helper function ocfs2_acl_set_mode() which does this the right way.
ocfs2_set_acl() and ocfs2_init_acl() are then updated to call
ocfs2_acl_set_mode().

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty

commit d4c3a56587af3edbe5f618b20e800e9f9fde13cb upstream.

Jan-Matthias Braun spotted a bug which locks up the driver when the
comedi ring buffer runs empty and provided a patch. The driver would
still send the data to comedi but the reader won't wake up any more.
What's required is setting the flag COMEDI_CB_BLOCK after new data has
arrived which wakes up the reader and therefore the read() command.

Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix usbdux timeout bug

commit ea25371a78c33e276527361d3ab19393d558b2fd upstream.

I've fixed a bug in the USBDUX driver which caused timeouts while
sending commands to the boards. This was mainly because of one bulk
transfer which had a timeout of 1ms (!). I've now set all timeouts to
1000ms.

From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

quota: Fix possible dq_flags corruption

commit 08261673cb6dc638c39f44d69b76fffb57b92a8b upstream.

dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and
atomically for example in mark_dquot_dirty or clear_dquot_dirty.  Hence a
change done by an atomic operation can be overwritten by a change done by a
non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk.

Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

dm mpath: fix stall when requeueing io

upstream commit 9eef87da2a8ea4920e0d913ff977cac064b68ee0 backported to
2.6.32.10 by Nikanth Karthikesan <knikanth@suse.de>

This patch fixes the problem that system may stall if target's ->map_rq
returns DM_MAPIO_REQUEUE in map_request().
E.g. stall happens on 1 CPU box when a dm-mpath device with queue_if_no_path
     bounces between all-paths-down and paths-up on I/O load.

When target's ->map_rq returns DM_MAPIO_REQUEUE, map_request() requeues
the request and returns to dm_request_fn().  Then, dm_request_fn()
doesn't exit the I/O dispatching loop and continues processing
the requeued request again.
This map and requeue loop can be done with interrupt disabled,
so 1 CPU system can be stalled if this situation happens.

For example, commands below can stall my 1 CPU box within 1 minute or so:
  # dmsetup table mp
  mp: 0 2097152 multipath 1 queue_if_no_path 0 1 1 service-time 0 1 2 8:144 1 1
  # while true; do dd if=/dev/mapper/mp of=/dev/null bs=1M count=100; done &
  # while true; do \
  > dmsetup message mp 0 "fail_path 8:144" \
  > dmsetup suspend --noflush mp \
  > dmsetup resume mp \
  > dmsetup message mp 0 "reinstate_path 8:144" \
  > done

To fix the problem above, this patch changes dm_request_fn() to exit
the I/O dispatching loop once if a request is requeued in map_request().

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fix NFS4 handling of mountpoint stat

commit 462d60577a997aa87c935ae4521bd303733a9f2b upstream.

RFC says we need to follow the chain of mounts if there's more
than one stacked on that point.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86-64, rwsem: Avoid store forwarding hazard in __downgrade_write

commit 0d1622d7f526311d87d7da2ee7dd14b73e45d3fc upstream.

The Intel Architecture Optimization Reference Manual states that a short
load that follows a long store to the same object will suffer a store
forwading penalty, particularly if the two accesses use different addresses.
Trivially, a long load that follows a short store will also suffer a penalty.

__downgrade_write() in rwsem incurs both penalties:  the increment operation
will not be able to reuse a recently-loaded rwsem value, and its result will
not be reused by any recently-following rwsem operation.

A comment in the code states that this is because 64-bit immediates are
special and expensive; but while they are slightly special (only a single
instruction allows them), they aren't expensive: a test shows that two loops,
one loading a 32-bit immediate and one loading a 64-bit immediate, both take
1.5 cycles per iteration.

Fix this by changing __downgrade_write to use the same add instruction on
i386 and on x86_64, so that it uses the same operand size as all the other
rwsem functions.

Signed-off-by: Avi Kivity <avi@redhat.com>
LKML-Reference: <1266049992-17419-1-git-send-email-avi@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Fix breakage of UML from the changes in the rwsem system

commit 4126faf0ab7417fbc6eb99fb0fd407e01e9e9dfe upstream.

The patches 5d0b7235d83eefdafda300656e97d368afcafc9a and
bafaecd11df15ad5b1e598adc7736afcd38ee13d broke the UML build:

On Sun, 17 Jan 2010, Ingo Molnar wrote:
>
> FYI, -tip testing found that these changes break the UML build:
>
> kernel/built-in.o: In function `__up_read':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:192: undefined reference to `call_rwsem_wake'
> kernel/built-in.o: In function `__up_write':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:210: undefined reference to `call_rwsem_wake'
> kernel/built-in.o: In function `__downgrade_write':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:228: undefined reference to `call_rwsem_downgrade_wake'
> kernel/built-in.o: In function `__down_read':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:112: undefined reference to `call_rwsem_down_read_failed'
> kernel/built-in.o: In function `__down_write_nested':
> /home/mingo/tip/arch/x86/include/asm/rwsem.h:154: undefined reference to `call_rwsem_down_write_failed'
> collect2: ld returned 1 exit status

Add lib/rwsem_64.o to the UML subarch objects to fix.

LKML-Reference: <alpine.LFD.2.00.1001171023440.13231@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86-64: support native xadd rwsem implementation

commit bafaecd11df15ad5b1e598adc7736afcd38ee13d upstream.

This one is much faster than the spinlock based fallback rwsem code,
with certain artifical benchmarks having shown 300%+ improvement on
threaded page faults etc.

Again, note the 32767-thread limit here. So this really does need that
whole "make rwsem_count_t be 64-bit and fix the BIAS values to match"
extension on top of it, but that is conceptually a totally independent
issue.

NOT TESTED! The original patch that this all was based on were tested by
KAMEZAWA Hiroyuki, but maybe I screwed up something when I created the
cleaned-up series, so caveat emptor..

Also note that it _may_ be a good idea to mark some more registers
clobbered on x86-64 in the inline asms instead of saving/restoring them.
They are inline functions, but they are only used in places where there
are not a lot of live registers _anyway_, so doing for example the
clobbers of %r8-%r11 in the asm wouldn't make the fast-path code any
worse, and would make the slow-path code smaller.

(Not that the slow-path really matters to that degree. Saving a few
unnecessary registers is the _least_ of our problems when we hit the slow
path. The instruction/cycle counting really only matters in the fast
path).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1001121810410.17145@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86-64, rwsem: 64-bit xadd rwsem implementation

commit 1838ef1d782f7527e6defe87e180598622d2d071 upstream.

For x86-64, 32767 threads really is not enough.  Change rwsem_count_t
to a signed long, so that it is 64 bits on x86-64.

This required the following changes to the assembly code:

a) %z0 doesn't work on all versions of gcc!  At least gcc 4.4.2 as
   shipped with Fedora 12 emits "ll" not "q" for 64 bits, even for
   integer operands.  Newer gccs apparently do this correctly, but
   avoid this problem by using the _ASM_ macros instead of %z.
b) 64 bits immediates are only allowed in "movq $imm,%reg"
   constructs... no others.  Change some of the constraints to "e",
   and fix the one case where we would have had to use an invalid
   immediate -- in that case, we only care about the upper half
   anyway, so just access the upper half.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <tip-bafaecd11df15ad5b1e598adc7736afcd38ee13d@git.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: clean up rwsem type system

commit 5d0b7235d83eefdafda300656e97d368afcafc9a upstream.

The fast version of the rwsems (the code that uses xadd) has
traditionally only worked on x86-32, and as a result it mixes different
kinds of types wildly - they just all happen to be 32-bit.  We have
"long", we have "__s32", and we have "int".

To make it work on x86-64, the types suddenly matter a lot more.  It can
be either a 32-bit or 64-bit signed type, and both work (with the caveat
that a 32-bit counter will only have 15 bits of effective write
counters, so it's limited to 32767 users).  But whatever type you
choose, it needs to be used consistently.

This makes a new 'rwsem_counter_t', that is a 32-bit signed type.  For a
64-bit type, you'd need to also update the BIAS values.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1001121755220.17145@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86-32: clean up rwsem inline asm statements

commit 59c33fa7791e9948ba467c2b83e307a0d087ab49 upstream.

This makes gcc use the right register names and instruction operand sizes
automatically for the rwsem inline asm statements.

So instead of using "(%%eax)" to specify the memory address that is the
semaphore, we use "(%1)" or similar. And instead of forcing the operation
to always be 32-bit, we use "%z0", taking the size from the actual
semaphore data structure itself.

This doesn't actually matter on x86-32, but if we want to use the same
inline asm for x86-64, we'll need to have the compiler generate the proper
64-bit names for the registers (%rax instead of %eax), and if we want to
use a 64-bit counter too (in order to avoid the 15-bit limit on the
write counter that limits concurrent users to 32767 threads), we'll need
to be able to generate instructions with "q" accesses rather than "l".

Since this header currently isn't enabled on x86-64, none of that matters,
but we do want to use the xadd version of the semaphores rather than have
to take spinlocks to do a rwsem. The mm->mmap_sem can be heavily contended
when you have lots of threads all taking page faults, and the fallback
rwsem code that uses a spinlock performs abysmally badly in that case.

[ hpa: modified the patch to skip size suffixes entirely when they are
  redundant due to register operands. ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1001121613560.17145@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

vgaarb: fix "target=default" passing

Commit 77c1ff3982c6b36961725dd19e872a1c07df7f3b fixed the userspace
pointer dereference, but introduced another bug pointed out by Eugene Teo
in RH bug #564264. Instead of comparing the point we were at in the string,
we instead compared the beginning of the string to "default".

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cacheinfo: Enable L3 CID only on AMD

commit cb19060abfdecac0d1eb2d2f0e7d6b7a3f8bc4f4 upstream.

Final stage linking can fail with

 arch/x86/built-in.o: In function `store_cache_disable':
 intel_cacheinfo.c:(.text+0xc509): undefined reference to `amd_get_nb_id'
 arch/x86/built-in.o: In function `show_cache_disable':
 intel_cacheinfo.c:(.text+0xc7d3): undefined reference to `amd_get_nb_id'

when CONFIG_CPU_SUP_AMD is not enabled because the amd_get_nb_id
helper is defined in AMD-specific code but also used in generic code
(intel_cacheinfo.c). Reorganize the L3 cache index disable code under
CONFIG_CPU_SUP_AMD since it is AMD-only anyway.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20100218184210.GF20473@aftab>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cacheinfo: Remove NUMA dependency, fix for AMD Fam10h rev D1

commit f619b3d8427eb57f0134dab75b0d217325c72411 upstream.

The show/store_cache_disable routines depend unnecessarily on NUMA's
cpu_to_node and the disabling of cache indices broke when !CONFIG_NUMA.
Remove that dependency by using a helper which is always correct.

While at it, enable L3 Cache Index disable on rev D1 Istanbuls which
sport the feature too.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20100218184339.GG20473@aftab>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cacheinfo: Calculate L3 indices

commit 048a8774ca43488d78605031f11cc206d7a2682a upstream.

We need to know the valid L3 indices interval when disabling them over
/sysfs. Do that when the core is brought online and add boundary checks
to the sysfs .store attribute.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1264172467-25155-6-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cacheinfo: Add cache index disable sysfs attrs only to L3 caches

commit 897de50e08937663912c86fb12ad7f708af2386c upstream.

The cache_disable_[01] attribute in

/sys/devices/system/cpu/cpu?/cache/index[0-3]/

is enabled on all cache levels although only L3 supports it. Add it only
to the cache level that actually supports it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1264172467-25155-5-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

intel-agp: Switch to wbinvd_on_all_cpus

commit 48a719c238bcbb72d6da79de9c5b3b93ab472107 upstream.

Simplify if-statement while at it.

[ hpa: we need to #include <asm/smp.h> ]

Cc: Dave Jones <davej@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1264172467-25155-3-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, cacheinfo: Fix disabling of L3 cache indices

commit dcf39daf3d6d97f8741e82f0b9fb7554704ed2d1 upstream.

* Correct the masks used for writing the cache index disable indices.
* Do not turn off L3 scrubber - it is not necessary.
* Make sure wbinvd is executed on the same node where the L3 is.
* Check for out-of-bounds values written to the registers.
* Make show_cache_disable hex values unambiguous
* Check for Erratum #388

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1264172467-25155-4-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, lib: Add wbinvd smp helpers

commit a7b480e7f30b3813353ec009f10f2ac7a6669f3b upstream.

Add wbinvd_on_cpu and wbinvd_on_all_cpus stubs for executing wbinvd on a
particular CPU.

[ hpa: renamed lib/smp.c to lib/cache-smp.c ]
[ hpa: wbinvd_on_all_cpus() returns int, but wbinvd() returns
  void.  Thus, the former cannot be a macro for the latter,
  replace with an inline function. ]

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1264172467-25155-2-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Revert "x86: disable IOMMUs on kernel crash"

commit 8f9f55e83e939724490d7cde3833c4883c6d1310 upstream.

This effectively reverts commit 61d047be99757fd9b0af900d7abce9a13a337488.

Disabling the IOMMU can potetially allow DMA transactions to
complete without being translated.  Leave it enabled, and allow
crash kernel to do the IOMMU reinitialization properly.

Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86/amd-iommu: enable iommu before attaching devices

commit 75f66533bc883f761a7adcab3281fe3323efbc90 upstream.

Hit another kdump problem as reported by Neil Horman.  When initializaing
the IOMMU, we attach devices to their domains before the IOMMU is
fully (re)initialized.  Attaching a device will issue some important
invalidations.  In the context of the newly kexec'd kdump kernel, the
IOMMU may have stale cached data from the original kernel.  Because we
do the attach too early, the invalidation commands are placed in the new
command buffer before the IOMMU is updated w/ that buffer.  This leaves
the stale entries in the kdump context and can renders device unusable.
Simply enable the IOMMU before we do the attach.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86/amd-iommu: Use helper function to destroy domain

commit 8b408fe4f853dcfa18d133aa4cf1d7546b4c3870 upstream.

In the amd_iommu_domain_destroy the protection_domain_free
function is partly reimplemented. The 'partly' is the bug
here because the domain is not deleted from the domain list.
This results in use-after-free errors and data-corruption.
Fix it by just using protection_domain_free instead.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: add FireMV 2400 PCI ID.

commit 79b9517a33a283c5d9db875c263670ed1e055f7e upstream.

This is an M24/X600 chip.

From RH# 581927

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: fix rs600 tlb flush

commit 30f69f3fb20bd719b5e1bf879339914063d38f47 upstream.

Typo in in flush leaded to no flush of the RS600 tlb which
ultimately leaded to massive system ram corruption, with
this patch everythings seems to work properly.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: fix tv dac conflict resolver

commit 08d075116db3592db218bfe0f554cd93c9e12505 upstream.

On systems with the tv dac shared between DVI and TV,
we can only use the dac for one of the connectors.
However, when using a digital monitor on the DVI port,
you can use the dac for the TV connector just fine.
Check the use_digital status when resolving the conflict.

Fixes fdo bug 27649, possibly others.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: disable the tv encoder when tv/cv is not in use

commit d3a67a43b0460bae3e2ac14092497833344ac10d upstream.

Switching between TV and VGA caused VGA to break on some systems
since the TV encoder was left enabled when VGA was used.

fixes fdo bug 25520.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/i915: Add no_lvds entry for the Clientron U800

commit 9875557ee8247c3f7390d378c027b45c7535a224 upstream.

BugLink: http://bugs.launchpad.net/ubuntu/bugs/544671
This system claims to have a LVDS but has not.

Signed-off-by: Stephane Graber <stgraber@ubuntu.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (sht15) Properly handle the case CONFIG_REGULATOR=n

commit c7a78d2c2e2537fd24903e966f34aae50319d587 upstream.

When CONFIG_REGULATOR isn't set, regulator_get_voltage() returns 0.
Properly handle this case by not trusting the value.

Reported-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (sht15) Fix sht15_calc_temp interpolation function

commit 328a2c22abd08911e37fa66f1358f829cecd72e9 upstream.

I discovered two issues.
First the previous sht15_calc_temp() loop did not iterate through the
temppoints array since the (data->supply_uV > temppoints[i - 1].vdd)
test is always true in this direction.

Also the two-points linear interpolation function was returning biased
values due to a stray division by 1000 which shouldn't be there.

[JD: Also change the default value for d1 from 0 to something saner.]

Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: usb - Fix Oops after usb-midi disconnection

commit 29aac005ff4dc8a5f50b80f4e5c4f59b21c0fb50 upstream.

usb-midi causes sometimes Oops at snd_usbmidi_output_drain() after
disconnection.  This is due to the access to the endpoints which have
been already released at disconnection while the files are still alive.

This patch fixes the problem by checking disconnection state at
snd_usbmidi_output_drain() and by releasing urbs but keeping the
endpoint instances until really all freed.

Tested-by: Tvrtko Ursulin <tvrtko@ursulin.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: hda - add a quirk for Clevo M570U laptop

commit d1501ea844eefdf925f6b711875b4b2b928fddf8 upstream.

Added the matching model for Clevo laptop M570U.

Signed-off-by: Joerg Schirottke <master@kanotix.com>
Tested-by: Maximilian Gerhard <maxbox@directbox.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

NFSv4: fix delegated locking

commit 0df5dd4aae211edeeeb84f7f84f6d093406d7c22 upstream.

Arnaud Giersch reports that NFSv4 locking is broken when we hold a
delegation since commit 8e469ebd6dc32cbaf620e134d79f740bf0ebab79 (NFSv4:
Don't allow posix locking against servers that don't support it).

According to Arnaud, the lock succeeds the first time he opens the file
(since we cannot do a delegated open) but then fails after we start using
delegated opens.

The following patch fixes it by ensuring that locking behaviour is
governed by a per-filesystem capability flag that is initially set, but
gets cleared if the server ever returns an OPEN without the
NFS4_OPEN_RESULT_LOCKTYPE_POSIX flag being set.

Reported-by: Arnaud Giersch <arnaud.giersch@iut-bm.univ-fcomte.fr>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR

commit 80e60639f1b7c121a7fea53920c5a4b94009361a upstream.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sched: Fix sched_getaffinity()

commit 84fba5ec91f11c0efb27d0ed6098f7447491f0df upstream.

taskset on 2.6.34-rc3 fails on one of my ppc64 test boxes with
the following error:

  sched_getaffinity(0, 16, 0x10029650030) = -1 EINVAL (Invalid argument)

This box has 128 threads and 16 bytes is enough to cover it.

Commit cd3d8031eb4311e516329aee03c79a08333141f1 (sched:
sched_getaffinity(): Allow less than NR_CPUS length) is
comparing this 16 bytes agains nr_cpu_ids.

Fix it by comparing nr_cpu_ids to the number of bits in the
cpumask we pass in.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Sharyathi Nagesh <sharyath@in.ibm.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
LKML-Reference: <20100406070218.GM5594@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sched: sched_getaffinity(): Allow less than NR_CPUS length

commit cd3d8031eb4311e516329aee03c79a08333141f1 upstream.

[ Note, this commit changes the syscall ABI for > 1024 CPUs systems. ]

Recently, some distro decided to use NR_CPUS=4096 for mysterious reasons.
Unfortunately, glibc sched interface has the following definition:

# define __CPU_SETSIZE  1024
# define __NCPUBITS     (8 * sizeof (__cpu_mask))
typedef unsigned long int __cpu_mask;
typedef struct
{
  __cpu_mask __bits[__CPU_SETSIZE / __NCPUBITS];
} cpu_set_t;

It mean, if NR_CPUS is bigger than 1024, cpu_set_t makes an
ABI issue ...

More recently, Sharyathi Nagesh reported following test program makes
misterious syscall failure:

 -----------------------------------------------------------------------
 #define _GNU_SOURCE
 #include<stdio.h>
 #include<errno.h>
 #include<sched.h>

 int main()
 {
     cpu_set_t set;
     if (sched_getaffinity(0, sizeof(cpu_set_t), &set) < 0)
         printf("\n Call is failing with:%d", errno);
 }
 -----------------------------------------------------------------------

Because the kernel assumes len argument of sched_getaffinity() is bigger
than NR_CPUS. But now it is not correct.

Now we are faced with the following annoying dilemma, due to
the limitations of the glibc interface built in years ago:

 (1) if we change glibc's __CPU_SETSIZE definition, we lost
     binary compatibility of _all_ application.

 (2) if we don't change it, we also lost binary compatibility of
     Sharyathi's use case.

Then, I would propse to change the rule of the len argument of
sched_getaffinity().

Old:
len should be bigger than NR_CPUS
New:
len should be bigger than maximum possible cpu id

This creates the following behavior:

 (A) In the real 4096 cpus machine, the above test program still
     return -EINVAL.

 (B) NR_CPUS=4096 but the machine have less than 1024 cpus (almost
     all machines in the world), the above can run successfully.

Fortunatelly, BIG SGI machine is mainly used for HPC use case. It means
they can rebuild their programs.

IOW we hope they are not annoyed by this issue ...

Reported-by: Sharyathi Nagesh <sharyath@in.ibm.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
LKML-Reference: <20100312161316.9520.A69D9226@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards

commit 472a474c6630efd195d3738339fd1bdc8aa3b1aa upstream.

Jan Grossmann reported kernel boot panic while booting SMP
kernel on his system with a single core cpu. SMP kernels call
enable_IR_x2apic() from native_smp_prepare_cpus() and on
platforms where the kernel doesn't find SMP configuration we
ended up again calling enable_IR_x2apic() from the
APIC_init_uniprocessor() call in the smp_sanity_check(). Thus
leading to kernel panic.

Don't call enable_IR_x2apic() and default_setup_apic_routing()
from APIC_init_uniprocessor() in CONFIG_SMP case.

NOTE: this kind of non-idempotent and assymetric initialization
sequence is rather fragile and unclean, we'll clean that up
in v2.6.35. This is the minimal fix for v2.6.34.

Reported-by: Jan.Grossmann@kielnet.net
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <jbarnes@virtuousgeek.org>
Cc: <david.woodhouse@intel.com>
Cc: <weidong.han@intel.com>
Cc: <youquan.song@intel.com>
Cc: <Jan.Grossmann@kielnet.net>
LKML-Reference: <1270083887.7835.78.camel@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, hpet: Erratum workaround for read after write of HPET comparator

commit 8da854cb02156c90028233ae1e85ce46a1d3f82c upstream.

On Wed, Feb 24, 2010 at 03:37:04PM -0800, Justin Piszcz wrote:
> Hello,
>
> Again, on the Intel DP55KG board:
>
> # uname -a
> Linux host 2.6.33 #1 SMP Wed Feb 24 18:31:00 EST 2010 x86_64 GNU/Linux
>
> [    1.237600] ------------[ cut here ]------------
> [    1.237890] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x70/0x80()
> [    1.238221] Hardware name:
> [    1.238504] hpet: compare register read back failed.
> [    1.238793] Modules linked in:
> [    1.239315] Pid: 0, comm: swapper Not tainted 2.6.33 #1
> [    1.239605] Call Trace:
> [    1.239886]  <IRQ>  [<ffffffff81056c13>] ? warn_slowpath_common+0x73/0xb0
> [    1.240409]  [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [    1.240699]  [<ffffffff81056cb0>] ? warn_slowpath_fmt+0x40/0x50
> [    1.240992]  [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [    1.241281]  [<ffffffff81041ad0>] ? hpet_next_event+0x70/0x80
> [    1.241573]  [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [    1.241859]  [<ffffffff81078e32>] ? tick_handle_oneshot_broadcast+0xe2/0x100
> [    1.246533]  [<ffffffff8102a67a>] ? timer_interrupt+0x1a/0x30
> [    1.246826]  [<ffffffff81085499>] ? handle_IRQ_event+0x39/0xd0
> [    1.247118]  [<ffffffff81087368>] ? handle_edge_irq+0xb8/0x160
> [    1.247407]  [<ffffffff81029f55>] ? handle_irq+0x15/0x20
> [    1.247689]  [<ffffffff810294a2>] ? do_IRQ+0x62/0xe0
> [    1.247976]  [<ffffffff8146be53>] ? ret_from_intr+0x0/0xa
> [    1.248262]  <EOI>  [<ffffffff8102f277>] ? mwait_idle+0x57/0x80
> [    1.248796]  [<ffffffff8102645c>] ? cpu_idle+0x5c/0xb0
> [    1.249080] ---[ end trace db7f668fb6fef4e1 ]---
>
> Is this something Intel has to fix or is it a bug in the kernel?

This is a chipset erratum.

Thomas: You mentioned we can retain this check only for known-buggy and
hpet debug kind of options. But here is the simple workaround patch for
this particular erratum.

Some chipsets have a erratum due to which read immediately following a
write of HPET comparator returns old comparator value instead of most
recently written value.

Erratum 15 in
"Intel I/O Controller Hub 9 (ICH9) Family Specification Update"
(http://www.intel.com/assets/pdf/specupdate/316973.pdf)

Workaround for the errata is to read the comparator twice if the first
one fails.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20100225185348.GA9674@linux-os.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: hpet: Make WARN_ON understandable

commit 18ed61da985c57eea3fe8038b13fa2837c9b3c3f upstream.

Andrew complained rightly that the WARN_ON in hpet_next_event() is
confusing and the code comment not really helpful.

Change it to WARN_ONCE and print the reason in clear text. Change the
comment to explain what kind of hardware wreckage we deal with.

Pointed-out-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86-32, resume: do a global tlb flush in S4 resume

commit 8ae06d223f8203c72104e5c0c4ee49a000aedb42 upstream.

Colin King reported a strange oops in S4 resume code path (see below). The test
system has i5/i7 CPU. The kernel doesn't open PAE, so 4M page table is used.
The oops always happen a virtual address 0xc03ff000, which is mapped to the
last 4k of first 4M memory. Doing a global tlb flush fixes the issue.

EIP: 0060:[<c0493a01>] EFLAGS: 00010086 CPU: 0
EIP is at copy_loop+0xe/0x15
EAX: 36aeb000 EBX: 00000000 ECX: 00000400 EDX: f55ad46c
ESI: 0f800000 EDI: c03ff000 EBP: f67fbec4 ESP: f67fbea8
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
...
...
CR2: 00000000c03ff000

Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <20100305005932.GA22675@sli10-desk.sh.intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: fix washed out image on legacy tv dac

commit 643acacf02679befd0f98ac3c5fecb805f1c9548 upstream.

bad cast was overwriting the tvdac adj values
Fixes fdo bug 27478

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon: R300 AD only has one quad pipe.

commit 57b54ea6b7863ccfeb41851b5f58f9fd1b83c79e upstream.

Gleaned from the Mesa code.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27355 .

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/edid/quirks: Envision EN2028

commit ba1163de2f74d624e7b0e530c4104c98ede0045a upstream.

Claims 1280x1024 preferred, physically 1600x1200

cf. http://bugzilla.redhat.com/530399

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: 6031/1: fix Thumb-2 decompressor

commit d4d9959c099751158c5cf14813fe378e206339c6 upstream.

98e12b5a6e05413 ("ARM: Fix decompressor's kernel size estimation for
ROM=y") broke the Thumb-2 decompressor because it added an entry in the
LC0 table but didn't adjust the offset the Thumb-2 code uses to load the
SP from that table.  Fix it.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iwlwifi: need check for valid qos packet before free

commit ece6444c2fe80dab679beb5f0d58b091f1933b00 upstream.

For 4965, need to check it is valid qos frame before free, only valid
QoS frame has the tid used to free the packets.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

CIFS: initialize nbytes at the beginning of CIFSSMBWrite()

commit a24e2d7d8f512340991ef0a59cb5d08d491b8e98 upstream.

By doing this we always overwrite nbytes value that is being passed on to
CIFSSMBWrite() and need not rely on the callers to initialize. CIFSSMBWrite2 is
doing this already.

Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cifs: Fix a kernel BUG with remote OS/2 server (try #3)

commit 6513a81e9325d712f1bfb9a1d7b750134e49ff18 upstream.

While chasing a bug report involving a OS/2 server, I noticed the server sets
pSMBr->CountHigh to a incorrect value even in case of normal writes. This
results in 'nbytes' being computed wrongly and triggers a kernel BUG at
mm/filemap.c.

void iov_iter_advance(struct iov_iter *i, size_t bytes)
{
        BUG_ON(i->count < bytes);    <--- BUG here

Why the server is setting 'CountHigh' is not clear but only does so after
writing 64k bytes. Though this looks like the server bug, the client side
crash may not be acceptable.

The workaround is to mask off high 16 bits if the number of bytes written as
returned by the server is greater than the bytes requested by the client as
suggested by Jeff Layton.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

libata: disable NCQ on Crucial C300 SSD

commit 68b0ddb289220b6d4d865be128939663be34959d upstream.

Crucial said,

  Thank you for contacting us. We know that with our M225 line of SSDs
  you sometimes need to disable NCQ (native command queuing) to avoid
  just the type of errors you're seeing. Our recommendation for the
  M225 is to add libata.force=noncq to your Linux kernel boot options,
  under the kernel ATA library option.

  I have sent your feedback to the engineers working on the C300, and
  asked them to please pass it on to the firmware team. I have been
  notified that they are in the process of testing and finalizing a
  new firmware version, that you can expect to see released around the
  end of April. We’ll keep you posted as to when it will be available
  for download.

So, turn off NCQ on the drive w/ the current firmware revision.

Reported in the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=15573

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: lethalwp@scarlet.be
Reported-by: Luke Macken <lmacken@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

eeepc-laptop: disable wireless hotplug for 1005PE

commit ced69c59811f05b2f8378467cbb82ac6ed3c6a5a upstream.

The wireless hotplug code is not needed on this model, and it disables
the wired ethernet card.  (Like on the 1005HA and 1201N).

References: <http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2010-February/003281.html>

[bwh: Backported to 2.6.32]

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Reported-by: Ansgar Burchardt <ansgar@43-1.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

eeepc-laptop: disable wireless hotplug for 1201N

commit 4194e2f551a6308e6ab34ac88210bf54858aa7df upstream.

[bwh: Backported to 2.6.32]

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

eeepc-laptop: add hotplug_disable parameter

commit 322a1356be96bcc4b97e8e370f6468c821330077 upstream.

Some new models need to disable wireless hotplug.
For the moment, we don't know excactly what models need that,
except 1005HA.
Users will be able to use that param as a workaround.

[bwh: Backported to 2.6.32]

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

eeepc-laptop: dmi blacklist to disable pci hotplug code

commit 10ae4b5663ff3092553bfbd867e7bd474ce6c553 upstream.

This is a short term workaround for Eeepc 1005HA.

refs: <http://bugzilla.kernel.org/show_bug.cgi?id=14570>

[bwh: Backported to 2.6.32]

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

eeepc-laptop: disable cpu speed control on EeePC 701

commit da8ba01deb98f3dc0558b1f5a37e64f40bba7904 upstream.

The EeePC 4G ("701") implements CFVS, but it is not supported by the
pre-installed OS, and the original option to change it in the BIOS
setup screen was removed in later versions.  Judging by the lack of
"Super Hybrid Engine" on Asus product pages, this applies to all "701"
models (4G/4G Surf/2G Surf).

So Asus made a deliberate decision not to support it on this model.
We have several reports that using it can cause the system to hang [1].
That said, it does not happen all the time.  Some users do not
experience it at all (and apparently wish to continue "right-clocking").

Check for the EeePC 701 using DMI.  If met, then disable writes to the
"cpufv" sysfs attribute and log an explanatory message.

Add a "cpufv_disabled" attribute which allow users to override this
policy.  Writing to this attribute will log a second message.

The sysfs attribute is more useful than a module option, because it
makes it easier for userspace scripts to provide consistent behaviour
(according to user configuration), regardless of whether the kernel
includes this change.

[1] <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559578>

[bwh: Backported to 2.6.32]

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: lock down video output state access

commit b525c06cdbd8a3963f0173ccd23f9147d4c384b5 upstream.

Given the right combination of ThinkPad and X.org, just reading the
video output control state is enough to hard-crash X.org.

Until the day I somehow find out a model or BIOS cut date to not
provide this feature to ThinkPads that can do video switching through
X RandR, change permissions so that only processes with CAP_SYS_ADMIN
can access any sort of video output control state.

This bug could be considered a local DoS I suppose, as it allows any
non-privledged local user to cause some versions of X.org to
hard-crash some ThinkPads.

Reported-by: Jidanni <jidanni@jidanni.org>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: convert to seq_file

commit 887965e6576a78f71b9b98dec43fd1c73becd2e8 upstream.

(hmh@hmh.eng.br: Updated to apply to 2.6.32.y)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: log initial state of rfkill switches

commit 5451a923bbdcff6ae665947e120af7238b21a9d2 upstream.

We already log the initial state of the hardware rfkill switch (WLSW),
might as well log the state of the softswitches as well.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Josip Rodin <joy+kernel@entuzijast.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: sync input device EV_SW initial state

commit d89a727aff649f6768f7a34ee57f031ebf8bab4c upstream.

Before we register the input device, sync the input layer EV_SW state
through a call to input_report_switch(), to avoid issuing a gratuitous
event for the initial state of these switches.

This fixes some annoyances caused by the interaction with rfkill and
EV_SW SW_RFKILL_ALL events.

Reported-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: use input_set_capability

commit 792979c8032b8f5adb77ea986db7082fff04c8e7 upstream.

Use input_set_capability() instead of set_bit.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: log temperatures on termal alarm (v2)

commit 9ebd9e833648745fa5ac6998b9e0153ccd3ba839 upstream.

Log temperatures on any of the EC thermal alarms.  It could be
useful to help tracking down what is happening...

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: expose module parameters

commit b09c72259e88cec3d602aef987a3209297f3a9c2 upstream.

Export the normal (non-command) module paramenters as mode 0444, so
that they will show up in sysfs.

These parameters must not be changed at runtime as a rule, with very
few exceptions.

Reported-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: adopt input device

commit d112ef95d4ec1ee7fe7123e3f21e4aac0d57570c upstream.

Properly init the parent field of the input device.  Thanks to Alan
Jenkins, who noted this problem in a different driver.

Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: silence bogus complain during rmmod

commit 6b30eb7d211840ba1a03f855d9e7b80a921368f2 upstream.

Fix this bogus warning during module shutdown, when
backlight event reporting is enabled:

"thinkpad_acpi: required events 0x00018000 not enabled!"

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thinkpad-acpi: issue backlight class events

commit 347a26860e2293b1347996876d3550499c7bb31f upstream.

Take advantage of the new events capabilities of the backlight class to
notify userspace of backlight changes.

This depends on "backlight: Allow drivers to update the core, and
generate events on changes", by Matthew Garrett.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

thinkpad-acpi: fix some version quirks

commit 90765c6aee568137521ba19347c744b5abde8161 upstream.

Update some of the BIOS/EC version quirks.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext3: journal all modifications in ext3_xattr_set_handle

commit d965736b8cb42ae51ba9c3f13488035a98d025c6 upstream.

ext3_xattr_set_handle() was zeroing out an inode outside
of journaling constraints; this is one of the accesses that
was causing the crc errors in journal replay as seen in
kernel.org bugzilla #14354.

Although ext3 doesn't have the crc issue, modifications
out of journal control are a Bad Thing.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext3: Don't update the superblock in ext3_statfs()

commit b918397542388de75bd86c32fbfa820e5d629fa9 upstream.

commit a71ce8c6c9bf269b192f352ea555217815cf027e updated ext3_statfs()
to update the on-disk superblock counters, but modified this buffer
directly without any journaling of the change.  This is one of the
accesses that was causing the crc errors in journal replay as seen in
kernel.org bugzilla #14354.

The modifications were originally to keep the sb "more" in sync,
so that a readonly fsck of the device didn't flag this as an
error (as often), but apparently e2fsprogs deals with this differently
now, anyway.

Based on Ted's patch for ext4, which was in turn based on my
work on that bug and another preliminary patch...

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pata_via: Add VIA VX900 support

commit 4f1deba435ef75380c1d06fda860c7a15ea16fdf upstream.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: x86: disable paravirt mmu reporting

commit a68a6a7282373bedba8a2ed751b6384edb983a64 upstream

Disable paravirt MMU capability reporting, so that new (or rebooted)
guests switch to native operation.

Paravirt MMU is a burden to maintain and does not bring significant
advantages compared to shadow anymore.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: VMX: Disable unrestricted guest when EPT disabled

commit 046d87103addc117f0d397196e85189722d4d7de upstream

Otherwise would cause VMEntry failure when using ept=0 on unrestricted guest
supported processors.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: SVM: Reset cr0 properly on vcpu reset

commit 18fa000ae453767b59ab97477925895a3f0c46ea upstream

svm_vcpu_reset() was not properly resetting the contents of the guest-visible
cr0 register, causing the following issue:
https://bugzilla.redhat.com/show_bug.cgi?id=525699

Without resetting cr0 properly, the vcpu was running the SIPI bootstrap routine
with paging enabled, making the vcpu get a pagefault exception while trying to
run it.

Instead of setting vmcb->save.cr0 directly, the new code just resets
kvm->arch.cr0 and calls kvm_set_cr0(). The bits that were set/cleared on
vmcb->save.cr0 (PG, WP, !CD, !NW) will be set properly by svm_set_cr0().

kvm_set_cr0() is used instead of calling svm_set_cr0() directly to make sure
kvm_mmu_reset_context() is called to reset the mmu to nonpaging mode.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: VMX: Use macros instead of hex value on cr0 initialization

commit fa40052ca04bdbbeb20b839cc8ffe9fa7beefbe9 upstream

This should have no effect, it is just to make the code clearer.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: VMX: Update instruction length on intercepted BP

commit c573cd22939e54fc1b8e672054a505048987a7cb upstream

We intercept #BP while in guest debugging mode. As VM exits due to
intercepted exceptions do not necessarily come with valid
idt_vectoring, we have to update event_exit_inst_len explicitly in such
cases. At least in the absence of migration, this ensures that
re-injections of #BP will find and use the correct instruction length.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: Fix segment descriptor loading

commit c697518a861e6c43b92b848895f9926580ee63c3 upstream

Add proper error and permission checking. This patch also change task
switching code to load segment selectors before segment descriptors, like
SDM requires, otherwise permission checking during segment descriptor
loading will be incorrect.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: x86 emulator: Fix popf emulation

commit d4c6a1549c056f1d817e8f6f2f97d8b44933472f upstream

POPF behaves differently depending on current CPU mode. Emulate correct
logic to prevent guest from changing flags that it can't change otherwise.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: x86 emulator: Check IOPL level during io instruction emulation

commit f850e2e603bf5a05b0aee7901857cf85715aa694 upstream

Make emulator check that vcpu is allowed to execute IN, INS, OUT,
OUTS, CLI, STI.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: x86 emulator: fix memory access during x86 emulation

commit 1871c6020d7308afb99127bba51f04548e7ca84e upstream

Currently when x86 emulator needs to access memory, page walk is done with
broadest permission possible, so if emulated instruction was executed
by userspace process it can still access kernel memory. Fix that by
providing correct memory access to page walker during emulation.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

KVM: x86 emulator: Add Virtual-8086 mode of emulation

commit a0044755679f3e761b8b95995e5f2db2b7efd0f6 upstream

For some instructions CPU behaves differently for real-mode and
virtual 8086. Let emulator know which mode cpu is in, so it will
not poke into vcpu state directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

backlight: mbp_nvidia_bl - add five more MacBook variants

commit 36bc5ee6a8d13333980fa54e97d3469d3d4cda98 upstream.

This adds the MacBook 1,1 2,1 3,1 4,1 and 4,2 to the DMI tables.

Signed-off-by: Evan McClain <evan.mcclain@gatech.edu>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

resource: move kernel function inside __KERNEL__

commit 96d07d211739fd2450ac54e81d00fa40fcd4b1bd upstream
From: Jiri Slaby <jslaby@suse.cz>

resource: move kernel function inside __KERNEL__

It is an internal function. Move it inside __KERNEL__ ifdef, along
with task_struct declaration.

Then we get:
#--- /usr/include/linux/resource.h       2009-09-14 15:09:29.000000000 +0200
#+++ usr/include/linux/resource.h       2010-01-04 11:30:54.000000000 +0100
#@@ -3,8 +3,6 @@
#
##include <linux/time.h>
#
#-struct task_struct;
#-
#/*
#* Resource control/accounting header file for linux
#*/
#@@ -70,6 +68,5 @@
#*/
##include <asm/resource.h>
#
#-int getrusage(struct task_struct *p, int who, struct rusage *ru);
#
##endif
#
#***********

include/linux/Kbuild is untouched, since unifdef is run even on
headers-y nowadays.

backport to 2.6.32 by maximilian attems <max@stro.at>
Patch commented out by gregkh due to quilt complaining.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: maximilian attems <max@stro.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space

commit 9d260ebc09a0ad6b5c73e17676df42c7bc75ff64 upstream.

Use NodeId MSR to get NodeId and number of nodes per processor.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20091216144355.GB28798@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981

commit b8e80cf386419453678b01bef830f53445ebb15d upstream.

BugLink: https://launchpad.net/bugs/551606
The OR's hardware distorts at PCM 100% because it does not correspond to
0 dB. Fix this in patch_ad1981() for all models using the Thinkpad
quirk.

Reported-by: Jane Silber
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: mixart: range checking proc file

commit b0cc58a25d04160d39a80e436847eaa2fbc5aa09 upstream.

The original code doesn't take into consideration that the value of
MIXART_BA0_SIZE - pos can be less than zero which would lead to a large
unsigned value for "count".

Also I moved the check that read size is a multiple of 4 bytes below
the code that adjusts "count".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

readahead: fix NULL filp dereference

commit 70655c06bd3f25111312d63985888112aed15ac5 upstream.

btrfs relocate_file_extent_cluster() calls us with NULL filp:

  [ 4005.426805] BUG: unable to handle kernel NULL pointer dereference at 00000021
  [ 4005.426818] IP: [<c109a130>] page_cache_sync_readahead+0x18/0x3e

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

raw: fsync method is now required

commit 55ab3a1ff843e3f0e24d2da44e71bffa5d853010 upstream.

Commit 148f948ba877f4d3cdef036b1ff6d9f68986706a (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) broke
the raw driver.

We now call through generic_file_aio_write -> generic_write_sync ->
vfs_fsync_range.  vfs_fsync_range has:

        if (!fop || !fop->fsync) {
                ret = -EINVAL;
                goto out;
        }

But drivers/char/raw.c doesn't set an fsync method.

We have two options: fix it or remove the raw driver completely.  I'm
happy to do either, the fact this has been broken for so long suggests it
is rarely used.

The patch below adds an fsync method to the raw driver.  My knowledge of
the block layer is pretty sketchy so this could do with a once over.

If we instead decide to remove the raw driver, this patch might still be
useful as a backport to 2.6.33 and 2.6.32.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>