vmscan/trace: Add 'file' info to trace_mm_vmscan_lru_isolate()

In trace_mm_vmscan_lru_isolate(), we don't output 'file' information to
the trace event and it is a bit inconvenient for the user to get the
real information(like pasted below).  mm_vmscan_lru_isolate:
isolate_mode=2 order=0 nr_requested=32 nr_scanned=32 nr_taken=32
contig_taken=0 contig_dirty=0 contig_failed=0

'active' can be obtained by analyzing mode(Thanks go to Minchan and
Mel), So this patch adds 'file' to the trace event and it now looks
like: mm_vmscan_lru_isolate: isolate_mode=2 order=0 nr_requested=32
nr_scanned=32 nr_taken=32 contig_taken=0 contig_dirty=0 contig_failed=0
file=0

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: improve order in lru list for split huge page

Put the tail subpages of an isolated hugepage under splitting in the lru
reclaim head as they supposedly should be isolated too next.

Queues the subpages in physical order in the lru for non isolated
hugepages under splitting.  That might provide some theoretical cache
benefit to the buddy allocator later.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: add tlb_remove_pmd_tlb_entry

We have tlb_remove_tlb_entry to indicate a pte tlb flush entry should be
flushed, but not a corresponding API for pmd entry.  This isn't a
problem so far because THP is only for x86 currently and tlb_flush()
under x86 will flush entire TLB.  But this is confusion and could be
missed if thp is ported to other arch.

Also convert tlb->need_flush = 1 to a VM_BUG_ON(!tlb->need_flush) in
__tlb_remove_page() as suggested by Andrea Arcangeli.  The
__tlb_remove_page() function is supposed to be called after
tlb_remove_xxx_tlb_entry() and we can catch any misuse.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: remove unnecessary tlb flush for mprotect

change_protection() will do TLB flush later, don't need duplicate tlb
flush.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: improve the error code path

Improve the error code path.  Delete unnecessary sysfs file for example.
Also remove the #ifdef xxx to make code better.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_cgroup: drop multi CONFIG_MEMORY_HOTPLUG

No need for two CONFIG_MEMORY_HOTPLUG blocks.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_alloc: break early in check_for_regular_memory()

If there is a zone below ZONE_NORMAL has present_pages, we can set node
state to N_NORMAL_MEMORY, no need to loop to end.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: cleanup for_each_node_state()

We already have for_each_node(node) define in nodemask.h, better to use it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: simplify LRU handling by new rule

Now, at LRU handling, memory cgroup needs to do complicated works to see
valid pc->mem_cgroup, which may be overwritten.

This patch is for relaxing the protocol. This patch guarantees
   - when pc->mem_cgroup is overwritten, page must not be on LRU.

By this, LRU routine can believe pc->mem_cgroup and don't need to check
bits on pc->flags.  This new rule may adds small overheads to swapin.  But
in most case, lru handling gets faster.

After this patch, PCG_ACCT_LRU bit is obsolete and removed.

[akpm@linux-foundation.org: remove unneeded VM_BUG_ON(), restore hannes's christmas tree]
[akpm@linux-foundation.org: clean up code comment]
[hughd@google.com: fix NULL mem_cgroup_try_charge]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: clear pc->mem_cgroup if necessary.

This is a preparation before removing a flag PCG_ACCT_LRU in page_cgroup
and reducing atomic ops/complexity in memcg LRU handling.

In some cases, pages are added to lru before charge to memcg and pages
are not classfied to memory cgroup at lru addtion.  Now, the lru where
the page should be added is determined a bit in page_cgroup->flags and
pc->mem_cgroup.  I'd like to remove the check of flag.

To handle the case pc->mem_cgroup may contain stale pointers if pages
are added to LRU before classification.  This patch resets
pc->mem_cgroup to root_mem_cgroup before lru additions.

[akpm@linux-foundation.org: fix CONFIG_CGROUP_MEM_CONT=n build]
[hughd@google.com: fix CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_CGROUP_MEM_RES_CTLR_SWAP=n build]
[akpm@linux-foundation.org: ksm.c needs memcontrol.h, per Michal]
[hughd@google.com: stop oops in mem_cgroup_reset_owner()]
[hughd@google.com: fix page migration to reset_owner]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: simplify corner case handling of LRU.

This patch simplifies LRU handling of racy case (memcg+SwapCache).  At
charging, SwapCache tend to be on LRU already.  So, before overwriting
pc->mem_cgroup, the page must be removed from LRU and added to LRU
later.

This patch does
        spin_lock(zone->lru_lock);
        if (PageLRU(page))
                remove from LRU
        overwrite pc->mem_cgroup
        if (PageLRU(page))
                add to new LRU.
        spin_unlock(zone->lru_lock);

And guarantee all pages are not on LRU at modifying pc->mem_cgroup.
This patch also unfies lru handling of replace_page_cache() and
swapin.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ying Han <yinghan@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: simplify page cache charging

This patch is a clean up. No functional/logical changes.

Because of commit ef6a3c6311 ("mm: add replace_page_cache_page()
function") , FUSE uses replace_page_cache() instead of
add_to_page_cache().  Then, mem_cgroup_cache_charge() is not called
against FUSE's pages from splice.

So now, mem_cgroup_cache_charge() gets pages that are not on the LRU
with the exception of PageSwapCache pages.  For checking,
WARN_ON_ONCE(PageLRU(page)) is added.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ying Han <yinghan@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom, memcg: fix exclusion of memcg threads after they have detached their mm

The oom killer relies on logic that identifies threads that have already
been oom killed when scanning the tasklist and, if found, deferring
until such threads have exited.  This is done by checking for any
candidate threads that have the TIF_MEMDIE bit set.

For memcg ooms, candidate threads are first found by calling
task_in_mem_cgroup() since the oom killer should not defer if there's an
oom killed thread in another memcg.

Unfortunately, task_in_mem_cgroup() excludes threads if they have
detached their mm in the process of exiting so TIF_MEMDIE is never
detected for such conditions.  This is different for global, mempolicy,
and cpuset oom conditions where a detached mm is only excluded after
checking for TIF_MEMDIE and deferring, if necessary, in
select_bad_process().

The fix is to return true if a task has a detached mm but is still in
the memcg or its hierarchy that is currently oom.  This will allow the
oom killer to appropriately defer rather than kill unnecessarily or, in
the worst case, panic the machine if nothing else is available to kill.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: free entries in soft_limit_tree if allocation fails

If we are not able to allocate tree nodes for all NUMA nodes then we
should release those that were allocated.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_cgroup: add helper function to get swap_cgroup

There are multiple places which need to get the swap_cgroup address, so
add a helper function:

  static struct swap_cgroup *swap_cgroup_getsc(swp_entry_t ent,
                                struct swap_cgroup_ctrl **ctrl);

to simplify the code.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: remove unneeded checks from uncharge_page()

mem_cgroup_uncharge_page() is only called on either freshly allocated
pages without page->mapping or on rmapped PageAnon() pages.  There is no
need to check for a page->mapping that is not an anon_vma.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: remove unneeded checks from newpage_charge()

All callsites pass in freshly allocated pages and a valid mm.  As a
result, all checks pertaining to the page's mapcount, page->mapping or the
fallback to init_mm are unneeded.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: page_cgroup: check page_cgroup arrays in lookup_page_cgroup() only when necessary

lookup_page_cgroup() is usually used only against pages that are used in
userspace.

The exception is the CONFIG_DEBUG_VM-only memcg check from the page
allocator: it can run on pages without page_cgroup descriptors allocated
when the pages are fed into the page allocator for the first time during
boot or memory hotplug.

Include the array check only when CONFIG_DEBUG_VM is set and save the
unnecessary check in production kernels.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: lookup_page_cgroup (almost) never returns NULL

Pages have their corresponding page_cgroup descriptors set up before
they are used in userspace, and thus managed by a memory cgroup.

The only time where lookup_page_cgroup() can return NULL is in the
CONFIG_DEBUG_VM-only page sanity checking code that executes while
feeding pages into the page allocator for the first time.

Remove the NULL checks against lookup_page_cgroup() results from all
callsites where we know that corresponding page_cgroup descriptors must
be allocated, and add a comment to the callsite that actually does have
to check the return value.

[hughd@google.com: stop oops in mem_cgroup_update_page_stat()]
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: clean up fault accounting

The fault accounting functions have a single, memcg-internal user, so they
don't need to be global.  In fact, their one-line bodies can be directly
folded into the caller.  And since faults happen one at a time, use
this_cpu_inc() directly instead of this_cpu_add(foo, 1).

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: unify remaining mem_cont, mem, etc. variable names to memcg

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: oom_kill: remove memcg argument from oom_kill_task()

The memcg argument of oom_kill_task() hasn't been used since 341aea2
'oom-kill: remove boost_dying_task_prio()'.  Kill it.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix pgpgin/pgpgout documentation

The two memcg stats pgpgin/pgpgout have different meaning than the ones
in vmstat, which indicates that we picked a bad naming for them.

It might be late to change the stat name, but better documentation is
always helpful.

Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/cgroups/memory.txt: fix typo

It should be memsw.max_usage_in_bytes. This typo has been there for
a really long time.

Signed-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: shorten preempt-disabled section around event checks

Only the ratelimit checks themselves have to run with preemption
disabled, the resulting actions - checking for usage thresholds,
updating the soft limit tree - can and should run with preemption
enabled.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reported-by: Yong Zhang <yong.zhang0@gmail.com>
Tested-by: Yong Zhang <yong.zhang0@gmail.com>
Reported-by: Luis Henriques <henrix@camandro.org>
Tested-by: Luis Henriques <henrix@camandro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: make mem_cgroup_split_huge_fixup() more efficient

In split_huge_page(), mem_cgroup_split_huge_fixup() is called to handle
page_cgroup modifcations.  It takes move_lock_page_cgroup() and modifies
page_cgroup and LRU accounting jobs and called HPAGE_PMD_SIZE - 1 times.

But thinking again,
  - compound_lock() is held at move_accout...then, it's not necessary
    to take move_lock_page_cgroup().
  - LRU is locked and all tail pages will go into the same LRU as
    head is now on.
  - page_cgroup is contiguous in huge page range.

This patch fixes mem_cgroup_split_huge_fixup() as to be called once per
hugepage and reduce costs for spliting.

[akpm@linux-foundation.org: fix typo, per Michal]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: remove unused node/section info from pc->flags

To find the page corresponding to a certain page_cgroup, the pc->flags
encoded the node or section ID with the base array to compare the pc
pointer to.

Now that the per-memory cgroup LRU lists link page descriptors directly,
there is no longer any code that knows the struct page_cgroup of a PFN
but not the struct page.

[hughd@google.com: remove unused node/section info from pc->flags fix]
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make per-memcg LRU lists exclusive

Now that all code that operated on global per-zone LRU lists is
converted to operate on per-memory cgroup LRU lists instead, there is no
reason to keep the double-LRU scheme around any longer.

The pc->lru member is removed and page->lru is linked directly to the
per-memory cgroup LRU lists, which removes two pointers from a
descriptor that exists for every page frame in the system.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: collect LRU list heads into struct lruvec

Having a unified structure with a LRU list set for both global zones and
per-memcg zones allows to keep that code simple which deals with LRU
lists and does not care about the container itself.

Once the per-memcg LRU lists directly link struct pages, the isolation
function and all other list manipulations are shared between the memcg
case and the global LRU case.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: convert global reclaim to per-memcg LRU lists

The global per-zone LRU lists are about to go away on memcg-enabled
kernels, global reclaim must be able to find its pages on the per-memcg
LRU lists.

Since the LRU pages of a zone are distributed over all existing memory
cgroups, a scan target for a zone is complete when all memory cgroups
are scanned for their proportional share of a zone's memory.

The forced scanning of small scan targets from kswapd is limited to
zones marked unreclaimable, otherwise kswapd can quickly overreclaim by
force-scanning the LRU lists of multiple memory cgroups.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: remove optimization of keeping the root_mem_cgroup LRU lists empty

root_mem_cgroup, lacking a configurable limit, was never subject to
limit reclaim, so the pages charged to it could be kept off its LRU
lists.  They would be found on the global per-zone LRU lists upon
physical memory pressure and it made sense to avoid uselessly linking
them to both lists.

The global per-zone LRU lists are about to go away on memcg-enabled
kernels, with all pages being exclusively linked to their respective
per-memcg LRU lists.  As a result, pages of the root_mem_cgroup must
also be linked to its LRU lists again.  This is purely about the LRU
list, root_mem_cgroup is still not charged.

The overhead is temporary until the double-LRU scheme is going away
completely.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move memcg hierarchy reclaim to generic reclaim code

Memory cgroup limit reclaim and traditional global pressure reclaim will
soon share the same code to reclaim from a hierarchical tree of memory
cgroups.

In preparation of this, move the two right next to each other in
shrink_zone().

The mem_cgroup_hierarchical_reclaim() polymath is split into a soft
limit reclaim function, which still does hierarchy walking on its own,
and a limit (shrinking) reclaim function, which relies on generic
reclaim code to walk the hierarchy.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: per-priority per-zone hierarchy scan generations

Memory cgroup limit reclaim currently picks one memory cgroup out of the
target hierarchy, remembers it as the last scanned child, and reclaims
all zones in it with decreasing priority levels.

The new hierarchy reclaim code will pick memory cgroups from the same
hierarchy concurrently from different zones and priority levels, it
becomes necessary that hierarchy roots not only remember the last
scanned child, but do so for each zone and priority level.

Until now, we reclaimed memcgs like this:

    mem = mem_cgroup_iter(root)
    for each priority level:
      for each zone in zonelist:
        reclaim(mem, zone)

But subsequent patches will move the memcg iteration inside the loop
over the zones:

    for each priority level:
      for each zone in zonelist:
        mem = mem_cgroup_iter(root)
        reclaim(mem, zone)

And to keep with the original scan order - memcg -> priority -> zone -
the last scanned memcg has to be remembered per zone and per priority
level.

Furthermore, global reclaim will be switched to the hierarchy walk as
well.  Different from limit reclaim, which can just recheck the limit
after some reclaim progress, its target is to scan all memcgs for the
desired zone pages, proportional to the memcg size, and so reliably
detecting a full hierarchy round-trip will become crucial.

Currently, the code relies on one reclaimer encountering the same memcg
twice, but that is error-prone with concurrent reclaimers.  Instead, use
a generation counter that is increased every time the child with the
highest ID has been visited, so that reclaimers can stop when the
generation changes.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: distinguish between memcg triggering reclaim and memcg being scanned

Memory cgroup hierarchies are currently handled completely outside of
the traditional reclaim code, which is invoked with a single memory
cgroup as an argument for the whole call stack.

Subsequent patches will switch this code to do hierarchical reclaim, so
there needs to be a distinction between a) the memory cgroup that is
triggering reclaim due to hitting its limit and b) the memory cgroup
that is being scanned as a child of a).

This patch introduces a struct mem_cgroup_zone that contains the
combination of the memory cgroup and the zone being scanned, which is
then passed down the stack instead of the zone argument.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: distinguish global reclaim from global LRU scanning

The traditional zone reclaim code is scanning the per-zone LRU lists
during direct reclaim and kswapd, and the per-zone per-memory cgroup LRU
lists when reclaiming on behalf of a memory cgroup limit.

Subsequent patches will convert the traditional reclaim code to reclaim
exclusively from the per-memory cgroup LRU lists.  As a result, using
the predicate for which LRU list is scanned will no longer be
appropriate to tell global reclaim from limit reclaim.

This patch adds a global_reclaim() predicate to tell direct/kswapd
reclaim from memory cgroup limit reclaim and substitutes it in all
places where currently scanning_global_lru() is used for that.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: consolidate hierarchy iteration primitives

The memcg naturalization series:

Memory control groups are currently bolted onto the side of
traditional memory management in places where better integration would
be preferrable.  To reclaim memory, for example, memory control groups
maintain their own LRU list and reclaim strategy aside from the global
per-zone LRU list reclaim.  But an extra list head for each existing
page frame is expensive and maintaining it requires additional code.

This patchset disables the global per-zone LRU lists on memory cgroup
configurations and converts all its users to operate on the per-memory
cgroup lists instead.  As LRU pages are then exclusively on one list,
this saves two list pointers for each page frame in the system:

page_cgroup array size with 4G physical memory

  vanilla: allocated 31457280 bytes of page_cgroup
  patched: allocated 15728640 bytes of page_cgroup

At the same time, system performance for various workloads is
unaffected:

100G sparse file cat, 4G physical memory, 10 runs, to test for code
bloat in the traditional LRU handling and kswapd & direct reclaim
paths, without/with the memory controller configured in

  vanilla: 71.603(0.207) seconds
  patched: 71.640(0.156) seconds

  vanilla: 79.558(0.288) seconds
  patched: 77.233(0.147) seconds

100G sparse file cat in 1G memory cgroup, 10 runs, to test for code
bloat in the traditional memory cgroup LRU handling and reclaim path

  vanilla: 96.844(0.281) seconds
  patched: 94.454(0.311) seconds

4 unlimited memcgs running kbuild -j32 each, 4G physical memory, 500M
swap on SSD, 10 runs, to test for regressions in kswapd & direct
reclaim using per-memcg LRU lists with multiple memcgs and multiple
allocators within each memcg

  vanilla: 717.722(1.440) seconds [ 69720.100(11600.835) majfaults ]
  patched: 714.106(2.313) seconds [ 71109.300(14886.186) majfaults ]

16 unlimited memcgs running kbuild, 1900M hierarchical limit, 500M
swap on SSD, 10 runs, to test for regressions in hierarchical memcg
setups

  vanilla: 2742.058(1.992) seconds [ 26479.600(1736.737) majfaults ]
  patched: 2743.267(1.214) seconds [ 27240.700(1076.063) majfaults ]

This patch:

There are currently two different implementations of iterating over a
memory cgroup hierarchy tree.

Consolidate them into one worker function and base the convenience
looping-macros on top of it.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: add mem_cgroup_replace_page_cache() to fix LRU issue

Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a
function replace_page_cache_page().  This function replaces a page in the
radix-tree with a new page.  WHen doing this, memory cgroup needs to fix
up the accounting information.  memcg need to check PCG_USED bit etc.

In some(many?) cases, 'newpage' is on LRU before calling
replace_page_cache().  So, memcg's LRU accounting information should be
fixed, too.

This patch adds mem_cgroup_replace_page_cache() and removes the old hooks.
 In that function, old pages will be unaccounted without touching
res_counter and new page will be accounted to the memcg (of old page).
WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid
races with LRU handling.

Background:
  replace_page_cache_page() is called by FUSE code in its splice() handling.
  Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated
  page and may be on LRU. LRU mis-accounting will be critical for memory cgroup
  because rmdir() checks the whole LRU is empty and there is no account leak.
  If a page is on the other LRU than it should be, rmdir() will fail.

This bug was added in March 2011, but no bug report yet.  I guess there
are not many people who use memcg and FUSE at the same time with upstream
kernels.

The result of this bug is that admin cannot destroy a memcg because of
account leak.  So, no panic, no deadlock.  And, even if an active cgroup
exist, umount can succseed.  So no problem at shutdown.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: limit paths

The current epoll code can be tickled to run basically indefinitely in
both loop detection path check (on ep_insert()), and in the wakeup paths.
The programs that tickle this behavior set up deeply linked networks of
epoll file descriptors that cause the epoll algorithms to traverse them
indefinitely.  A couple of these sample programs have been previously
posted in this thread: https://lkml.org/lkml/2011/2/25/297.

To fix the loop detection path check algorithms, I simply keep track of
the epoll nodes that have been already visited.  Thus, the loop detection
becomes proportional to the number of epoll file descriptor and links.
This dramatically decreases the run-time of the loop check algorithm.  In
one diabolical case I tried it reduced the run-time from 15 mintues (all
in kernel time) to .3 seconds.

Fixing the wakeup paths could be done at wakeup time in a similar manner
by keeping track of nodes that have already been visited, but the
complexity is harder, since there can be multiple wakeups on different
cpus...Thus, I've opted to limit the number of possible wakeup paths when
the paths are created.

This is accomplished, by noting that the end file descriptor points that
are found during the loop detection pass (from the newly added link), are
actually the sources for wakeup events.  I keep a list of these file
descriptors and limit the number and length of these paths that emanate
from these 'source file descriptors'.  In the current implemetation I
allow 1000 paths of length 1, 500 of length 2, 100 of length 3, 50 of
length 4 and 10 of length 5.  Note that it is sufficient to check the
'source file descriptors' reachable from the newly added link, since no
other 'source file descriptors' will have newly added links.  This allows
us to check only the wakeup paths that may have gotten too long, and not
re-check all possible wakeup paths on the system.

In terms of the path limit selection, I think its first worth noting that
the most common case for epoll, is probably the model where you have 1
epoll file descriptor that is monitoring n number of 'source file
descriptors'.  In this case, each 'source file descriptor' has a 1 path of
length 1.  Thus, I believe that the limits I'm proposing are quite
reasonable and in fact may be too generous.  Thus, I'm hoping that the
proposed limits will not prevent any workloads that currently work to
fail.

In terms of locking, I have extended the use of the 'epmutex' to all
epoll_ctl add and remove operations.  Currently its only used in a subset
of the add paths.  I need to hold the epmutex, so that we can correctly
traverse a coherent graph, to check the number of paths.  I believe that
this additional locking is probably ok, since its in the setup/teardown
paths, and doesn't affect the running paths, but it certainly is going to
add some extra overhead.  Also, worth noting is that the epmuex was
recently added to the ep_ctl add operations in the initial path loop
detection code using the argument that it was not on a critical path.

Another thing to note here, is the length of epoll chains that is allowed.
Currently, eventpoll.c defines:

/* Maximum number of nesting allowed inside epoll sets */
#define EP_MAX_NESTS 4

This basically means that I am limited to a graph depth of 5 (EP_MAX_NESTS
+ 1).  However, this limit is currently only enforced during the loop
check detection code, and only when the epoll file descriptors are added
in a certain order.  Thus, this limit is currently easily bypassed.  The
newly added check for wakeup paths, stricly limits the wakeup paths to a
length of 5, regardless of the order in which ep's are linked together.
Thus, a side-effect of the new code is a more consistent enforcement of
the graph depth.

Thus far, I've tested this, using the sample programs previously
mentioned, which now either return quickly or return -EINVAL.  I've also
testing using the piptest.c epoll tester, which showed no difference in
performance.  I've also created a number of different epoll networks and
tested that they behave as expectded.

I believe this solves the original diabolical test cases, while still
preserving the sane epoll nesting.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Nelson Elhage <nelhage@ksplice.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pipe: fail cleanly when root tries F_SETPIPE_SZ with big size

When a user with the CAP_SYS_RESOURCE cap tries to F_SETPIPE_SZ a pipe
with size bigger than kmalloc() can alloc it spits out an ugly warning:

  ------------[ cut here ]------------
  WARNING: at mm/page_alloc.c:2095 __alloc_pages_nodemask+0x5d3/0x7a0()
  Pid: 733, comm: a.out Not tainted 3.2.0-rc1+ #4
  Call Trace:
     warn_slowpath_common+0x75/0xb0
     warn_slowpath_null+0x15/0x20
     __alloc_pages_nodemask+0x5d3/0x7a0
     __get_free_pages+0x12/0x50
     __kmalloc+0x12b/0x150
     pipe_set_size+0x75/0x120
     pipe_fcntl+0xf8/0x140
     do_fcntl+0x2d4/0x410
     sys_fcntl+0x66/0xa0
     system_call_fastpath+0x16/0x1b
  ---[ end trace 432f702e6db7b5ee ]---

Instead, make kcalloc() handle the overflow case and fail quietly.

[akpm@linux-foundation.org: switch to sizeof(*bufs) for 80-column niceness]
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: document setting min order with debug_guardpage_minorder > 0

Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parisc, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so those calls to
set_fs(USER_DS) are redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/nvidia/nvidia.c: fix warning

Fix the int/bool confusion in there.

  drivers/video/nvidia/nvidia.c:1602: warning: return from incompatible pointer type

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,x86,um: move CMPXCHG_DOUBLE config option

Move CMPXCHG_DOUBLE and rename it to HAVE_CMPXCHG_DOUBLE so architectures
can simply select the option if it is supported.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,x86,um: move CMPXCHG_LOCAL config option

Move CMPXCHG_LOCAL and rename it to HAVE_CMPXCHG_LOCAL so architectures
can simply select the option if it is supported.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,slub,x86: decouple size of struct page from CONFIG_CMPXCHG_LOCAL

While implementing cmpxchg_double() on s390 I realized that we don't set
CONFIG_CMPXCHG_LOCAL despite the fact that we have support for it.

However setting that option will increase the size of struct page by
eight bytes on 64 bit, which we certainly do not want.  Also, it doesn't
make sense that a present cpu feature should increase the size of struct
page.

Besides that it looks like the dependency to CMPXCHG_LOCAL is wrong and
that it should depend on CMPXCHG_DOUBLE instead.

This patch:

If an architecture supports CMPXCHG_LOCAL this shouldn't result
automatically in larger struct pages if the SLUB allocator is used.
Instead introduce a new config option "HAVE_ALIGNED_STRUCT_PAGE" which
can be selected if a double word aligned struct page is required.  Also
update x86 Kconfig so that it should work as before.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/linkage.h: remove unused ATTRIB_NORET macro

The uses have been renamed so delete the unused macro.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

treewide: convert uses of ATTRIB_NORETURN to __noreturn

Use the more commonly used __noreturn instead of ATTRIB_NORETURN.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

treewide: remove useless NORET_TYPE macro and uses

It's a very old and now unused prototype marking so just delete it.

Neaten panic pointer argument style to keep checkpatch quiet.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/linkage.h: remove unused NORET_AND macro

The only use in kernel.h is gone so remove the macro.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: neaten panic prototype

Use __printf macro.
Convert NORET_AND to ATTRIB_NORET.
Use the normal kernel style for pointer arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: silence DEBUG_STRICT_USER_COPY_CHECKS=y warning

Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning:

  In file included from arch/x86/include/asm/uaccess.h:573,
                   from kernel/kprobes.c:55:
  In function 'copy_from_user',
      inlined from 'write_enabled_file_bool' at
      kernel/kprobes.c:2191:
  arch/x86/include/asm/uaccess_64.h:65:
  warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct

presumably due to buf_size being signed causing GCC to fail to see that
buf_size can't become negative.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: fix null pointer deref in proc_pid_permission()

get_proc_task() can fail to search the task and return NULL,
put_task_struct() will then bomb the kernel with following oops:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
  IP: [<ffffffff81217d34>] proc_pid_permission+0x64/0xe0
  PGD 112075067 PUD 112814067 PMD 0
  Oops: 0002 [#1] PREEMPT SMP

This is a regression introduced by commit 0499680a ("procfs: add hidepid=
and gid= mount options").  The kernel should return -ESRCH if
get_proc_task() failed.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Stephen Wilson <wilsons@start.ca>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pptp: Accept packet with seq zero

Initialize the PPTP "seq received" value to 0xffffffff, so we don't
ignore packets with seq zero.

Signed-off-by: Bradley Peterson <despite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RDS: Remove some unused iWARP code

rds_iw_flush_goal() just returns a count, but it is only called in one
place and its return value is ignored there.  So delete all the dead code.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fsl: fec: handle 10Mbps speed in RMII mode

when the link is 10 Mbps and the mode is RMII, it's necessary
to set FRCONT to 1 in MIIGSK_CFGR to divide the RMII source
clock by 10 in order to support 10 Mbps operations.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap

Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap

Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

ksz884x: fix mtu for VLAN

The Ethernet header does not account for the addition of a VLAN header.
Full size Ethernet frames containing VLAN header are not processed
because the frame is larger than the resulting hw mtu.

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: sfq: add optional RED on top of SFQ

Adds an optional Random Early Detection on each SFQ flow queue.

Traditional SFQ limits count of packets, while RED permits to also
control number of bytes per flow, and adds ECN capability as well.

1) We dont handle the idle time management in this RED implementation,
since each 'new flow' begins with a null qavg. We really want to address
backlogged flows.

2) if headdrop is selected, we try to ecn mark first packet instead of
currently enqueued packet. This gives faster feedback for tcp flows
compared to traditional RED [ marking the last packet in queue ]

Example of use :

tc qdisc add dev $DEV parent 1:1 handle 10: est 1sec 4sec sfq \
limit 3000 headdrop flows 512 divisor 16384 \
redflowlimit 100000 min 8000 max 60000 probability 0.20 ecn

qdisc sfq 10: parent 1:1 limit 3000p quantum 1514b depth 127 headdrop
flows 512/16384 divisor 16384
 ewma 6 min 8000b max 60000b probability 0.2 ecn
 prob_mark 0 prob_mark_head 4876 prob_drop 6131
 forced_mark 0 forced_mark_head 0 forced_drop 0
 Sent 1175211782 bytes 777537 pkt (dropped 6131, overlimits 11007
requeues 0)
 rate 99483Kbit 8219pps backlog 689392b 456p requeues 0

In this test, with 64 netperf TCP_STREAM sessions, 50% using ECN enabled
flows, we can see number of packets CE marked is smaller than number of
drops (for non ECN flows)

If same test is run, without RED, we can check backlog is much bigger.

qdisc sfq 10: parent 1:1 limit 3000p quantum 1514b depth 127 headdrop
flows 512/16384 divisor 16384
 Sent 1148683617 bytes 795006 pkt (dropped 0, overlimits 0 requeues 0)
 rate 98429Kbit 8521pps backlog 1221290b 841p requeues 0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Dave Taht <dave.taht@gmail.com>
Tested-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dp83640: Fix NOHZ local_softirq_pending 08 warning

Similar problem as in 481a8199142c050b72bff8a1956a49fd0a75bbe0 ("can:
fix NOHZ local_softirq_pending 08 warning"). This fix replaces
netif_rx() with netif_rx_ni() which has to be used from
process/softirq context.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

gianfar: Fix invalid TX frames returned on error queue when time stamping

When TX time stamping for PTP messages is enabled on a socket, a time
stamp is returned on the socket error queue to the user space application
after the frame was transmitted. The transmitted frame is also returned on
the error queue so that an application knows to which frame the time stamp
belongs.

In the current implementation the TxFCB is immediately followed by the
frame. Since the eTSEC inserts the TX time stamp 8 bytes after the TxFCB,
parts of the frame have been overwritten and an invalid frame was returned
on the socket error queue.

This patch fixes the described problem by adding additional 16 padding
bytes between the TxFCB and the frame for all messages sent from a time
stamping enabled socket (other sockets are not affected).

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

gianfar: Fix missing sock reference when processing TX time stamps

When there is not enough headroom in the skb a private copy will be made.
However, the private copy had no reference to the socket and consequently
no time stamp could be queued on the socket error queue during the
skb_tstamp_tx function. This patch fixes this issue by also stealing the
sock reference from the original skb after making the private copy.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

phylib: introduce mdiobus_alloc_size()

Introduce function mdiobus_alloc_size() as an alternative to mdiobus_alloc().
Most callers of mdiobus_alloc() also allocate a private data structure, and
then manually point bus->priv to this object.  mdiobus_alloc_size()
combines the two operations into one, which simplifies memory management.

The original mdiobus_alloc() now just calls mdiobus_alloc_size(0).

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: bcm5974 - set BUTTONPAD property
  Input: serio_raw - return proper result when serio_raw_write fails
  Input: serio_raw - really signal HUP upon disconnect
  Input: serio_raw - remove stray semicolon
  Input: revert some over-zealous conversions to module_platform_driver()

Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  FUSE: Notifying the kernel of deletion.
  fuse: support ioctl on directories
  fuse: Use kcalloc instead of kzalloc to allocate array
  fuse: llseek optimize SEEK_CUR and SEEK_SET

Merge tag 'to-linus' of git://github.com/rustyrussell/linux

* tag 'to-linus' of git://github.com/rustyrussell/linux: (24 commits)
  lguest: Make sure interrupt is allocated ok by lguest_setup_irq
  lguest: move the lguest tool to the tools directory
  lguest: switch segment-voodoo-numbers to readable symbols
  virtio: balloon: Add freeze, restore handlers to support S4
  virtio: balloon: Move vq initialization into separate function
  virtio: net: Add freeze, restore handlers to support S4
  virtio: net: Move vq and vq buf removal into separate function
  virtio: net: Move vq initialization into separate function
  virtio: blk: Add freeze, restore handlers to support S4
  virtio: blk: Move vq initialization to separate function
  virtio: console: Disable callbacks for virtqueues at start of S4 freeze
  virtio: console: Add freeze and restore handlers to support S4
  virtio: console: Move vq and vq buf removal into separate functions
  virtio: pci: add PM notification handlers for restore, freeze, thaw, poweroff
  virtio: pci: switch to new PM API
  virtio_blk: fix config handler race
  virtio: add debugging if driver doesn't kick.
  virtio: expose added descriptors immediately.
  virtio: avoid modulus operation.
  virtio: support unlocked queue kick
  ...

net: decrement memcg jump label when limit, not usage, is changed

The logic of the current code is that whenever we destroy
a cgroup that had its limit set (set meaning different than
maximum), we should decrement the jump_label counter.
Otherwise we assume it was never incremented.

But what the code actually does is test for RES_USAGE
instead of RES_LIMIT. Usage being different than maximum
is likely to be true most of the time.

The effect of this is that the key must become negative,
and since the jump_label test says:

        !!atomic_read(&key->enabled);

we'll have jump_labels still on when no one else is
using this functionality.

Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: reintroduce missing rcu_assign_pointer() calls

commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to
RCU_INIT_POINTER) did a lot of incorrect changes, since it did a
complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x,
y).

We miss needed barriers, even on x86, when y is not NULL.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

brcmsmac: fix reading of PCI sprom contents

It appears that you can only read the sprom contents with aligned 16-bit
reads: anything else causes at least some versions of the broadcom
chipset to abort the PCI transaction, returning 0xff.

This apparently doesn't trigger very often, because most setups don't
use an external srom chip, and the OTP sprom loading doesn't have this
issue.  But at least the current 11" Macbook Air does trigger it, and
wireless communications were broken as a result.

Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless

x86: Get rid of 'dubious one-bit signed bitfield' sprase warning

This very noisy sparse warning appears on almost every file in the
kernel:

  CHECK   init/main.c
  arch/x86/include/asm/thread_info.h:43:55: error: dubious one-bit signed bitfield
  arch/x86/include/asm/thread_info.h:44:46: error: dubious one-bit signed bitfield

This patch changes sig_on_uaccess_error and uaccess_err flags to unsigned
type and thus fixes the warning.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits)
  ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
  ALSA: hda - Fix the lost power-setup of seconary pins after PM resume
  ALSA: usb-audio: add Yamaha MOX6/MOX8 support
  ALSA: virtuoso: add S/PDIF input support for all Xonars
  ALSA: ice1724 - Support for ooAoo SQ210a
  ALSA: ice1724 - Allow card info based on model only
  ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations
  ALSA: hdspm - Provide unique driver id based on card serial
  ASoC: Dynamically allocate the rtd device for a non-empty release()
  ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC
  ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs
  ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs
  ALSA: hda - Use auto-parser for HP laptops with cx20459 codec
  ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()
  ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()
  ALSA: hda/cirrus - support for iMac12,2 model
  ASoC: cx20442: add bias control over a platform provided regulator
  ALSA: usb-audio - Avoid flood of frame-active debug messages
  ALSA: snd-usb-us122l: Delete calls to preempt_disable
  mfd: Put WM8994 into cache only mode when suspending
  ...

Fix up trivial conflicts in:
 - arch/arm/mach-s3c64xx/mach-crag6410.c:
renamed speyside_wm8962 to tobermory, added littlemill right
next to it
 - drivers/base/regmap/{regcache.c,regmap.c}:
duplicate diff that had already come in with other changes in
the regmap tree

x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=y

We only need amd_bus.o for AMD systems with PCI.  arch/x86/pci/Makefile
already depends on CONFIG_PCI=y, so this patch just adds the dependency
on CONFIG_AMD_NB.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename)
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'topic/hda' into for-linus

Merge branch 'topic/misc' into for-linus

Merge branch 'for-3.3' of git://git./linux/kernel/git/broonie/sound into topic/asoc

Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh

SH/R-Mobile updates for 3.3 merge window.

* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: (32 commits)
  arm: mach-shmobile: add a resource name for shdma
  ARM: mach-shmobile: r8a7779 SMP support V3
  ARM: mach-shmobile: Add kota2 defconfig.
  ARM: mach-shmobile: Add marzen defconfig.
  ARM: mach-shmobile: r8a7779 power domain support V2
  ARM: mach-shmobile: Fix up marzen build for recent GIC changes.
  ARM: mach-shmobile: r8a7779 PFC function support
  ARM: mach-shmobile: Flush caches in platform_cpu_die()
  ARM: mach-shmobile: Allow SoC specific CPU kill code
  ARM: mach-shmobile: Fix headsmp.S code to use CPUINIT
  ARM: mach-shmobile: clock-r8a7779: clkz/clkzs support
  ARM: mach-shmobile: clock-r8a7779: add DIV4 clock support
  ARM: mach-shmobile: Marzen LAN89218 support
  ARM: mach-shmobile: Marzen SCIF2/SCIF4 support
  ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2
  ARM: mach-shmobile: r8a7779 and Marzen base support V2
  sh: pfc: Unlock register support
  sh: pfc: Variable bitfield width config register support
  sh: pfc: Add config_reg_helper() function
  sh: pfc: Convert index to field and value pair
  ...

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

SuperH updates for 3.3 merge window.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (38 commits)
  sh: magicpanelr2: Update for parse_mtd_partitions() fallout.
  sh: mach-rsk: Update for parse_mtd_partitions() fallout.
  sh: sh2a: Improve cache flush/invalidate functions
  sh: also without PM_RUNTIME pm_runtime.o must be built
  sh: add a resource name for shdma
  sh: Remove redundant try_to_freeze() invocations.
  sh: Ensure IRQs are enabled across do_notify_resume().
  sh: Fix up store queue code for subsys_interface changes.
  sh: clkfwk: sh_clk_init_parent() should be called after clk_register()
  sh: add platform_device for renesas_usbhs in board-sh7757lcr
  sh: modify clock-sh7757 for renesas_usbhs
  sh: pfc: ioremap() support
  sh: use ioread32/iowrite32 and mapped_reg for div6
  sh: use ioread32/iowrite32 and mapped_reg for div4
  sh: use ioread32/iowrite32 and mapped_reg for mstp32
  sh: extend clock struct with mapped_reg member
  sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT()
  sh: clkfwk: clock-sh7724: all div6_clks use SH_CLK_DIV6_EXT()
  sh: clock-sh7723: add CLKDEV_ICK_ID for cleanup
  serial: sh-sci: Handle GPIO function requests.
  ...

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix lockup by limiting load-balance retries on lock-break
  sched: Fix CONFIG_CGROUP_SCHED dependency
  sched: Remove empty #ifdefs

lguest: Make sure interrupt is allocated ok by lguest_setup_irq

Make sure the interrupt is allocated correctly by lguest_setup_irq (check the
return value of irq_alloc_desc_at for -ENOMEM)

Signed-off-by: Stratos Psomadakis <psomas@cslab.ece.ntua.gr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleanups and commentry)

lguest: move the lguest tool to the tools directory

This is a better location instead of having it in Documentation.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (fixed compile)

lguest: switch segment-voodoo-numbers to readable symbols

When studying lguest's x86 segment descriptor code, it is not longer
necessary to have the Intel x86 architecture manual open on the page
with the segment descriptor illustration to understand the crazy
numbers assigned to both descriptor structure halves a/b.
Now the struct desc_struct's fields, like suggested by
Glauber de Oliveira Costa in 2008, are used.

Signed-off-by: Jacek Galowicz <jacek@galowicz.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: balloon: Add freeze, restore handlers to support S4

Handling balloon hibernate / restore is tricky.  If the balloon was
inflated before going into the hibernation state, upon resume, the host
will not have any memory of that.  Any pages that were passed on to the
host earlier would most likely be invalid, and the host will have to
re-balloon to the previous value to get in the pre-hibernate state.

So the only sane thing for the guest to do here is to discard all the
pages that were put in the balloon.  When to discard the pages is the
next question.

One solution is to deflate the balloon just before writing the image to
the disk (in the freeze() PM callback).  However, asking for pages from
the host just to discard them immediately after seems wasteful of
resources.  Hence, it makes sense to do this by just fudging our
counters soon after wakeup.  This means we don't deflate the balloon
before sleep, and also don't put unnecessary pressure on the host.

This also helps in the thaw case: if the freeze fails for whatever
reason, the balloon should continue to remain in the inflated state.
This was tested by issuing 'swapoff -a' and trying to go into the S4
state.  That fails, and the balloon stays inflated, as expected.  Both
the host and the guest are happy.

Finally, in the restore() callback, we empty the list of pages that were
previously given off to the host, add the appropriate number of pages to
the totalram_pages counter, reset the num_pages counter to 0, and
all is fine.

As a last step, delete the vqs on the freeze callback to prepare for
hibernation, and re-create them in the restore and thaw callbacks to
resume normal operation.

The kthread doesn't race with any operations here, since it's frozen
before the freeze() call and is thawed after the thaw() and restore()
callbacks, so we're safe with that.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: balloon: Move vq initialization into separate function

The probe and PM restore functions will share this code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: net: Add freeze, restore handlers to support S4

Remove all the vqs, disable napi and detach from the netdev on
hibernation.

Re-create vqs after restoring from a hibernated image, re-enable napi
and re-attach the netdev.  This keeps networking working across
hibernation.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: net: Move vq and vq buf removal into separate function

The remove and PM freeze functions will share this code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: net: Move vq initialization into separate function

The probe and PM restore functions will share this code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: blk: Add freeze, restore handlers to support S4

Delete the vq and flush any pending requests from the block queue on the
freeze callback to prepare for hibernation.

Re-create the vq in the restore callback to resume normal function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: blk: Move vq initialization to separate function

The probe and PM restore functions will share this code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: console: Disable callbacks for virtqueues at start of S4 freeze

To ensure we don't receive any more interrupts from the host after we
enter the freeze function, disable all vq interrupts.

There wasn't any problem seen due to this in tests, but applying this
patch makes the freeze case more robust.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: console: Add freeze and restore handlers to support S4

Remove all vqs and associated buffers in the freeze callback which
prepares us to go into hibernation state.  On restore, re-create all the
vqs and populate the input vqs with buffers to get to the pre-hibernate
state.

Note: Any outstanding unconsumed buffers are discarded; which means
there's a possibility of data loss in case the host or the guest didn't
consume any data already present in the vqs.  This can be addressed in a
later patch series, perhaps in virtio common code.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: console: Move vq and vq buf removal into separate functions

This common code will be shared with the PM freeze function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: pci: add PM notification handlers for restore, freeze, thaw, poweroff

Handle thaw, restore and freeze notifications from the PM core.  Expose
these to individual virtio drivers that can quiesce and resume vq
operations.  For drivers not implementing the thaw() method, use the
restore method instead.

These functions also save device-specific data so that the device can be
put in pre-suspend state after resume, and disable and enable the PCI
device in the freeze and resume functions, respectively.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: pci: switch to new PM API

The older PM API doesn't have a way to get notifications on hibernate
events.  Switch to the newer one that gives us those notifications.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio_blk: fix config handler race

Fix a theoretical race related to config work
handler: a config interrupt might happen
after we flush config work but before we
reset the device. It will then cause the
config work to run during or after reset.

Two problems with this:
- if this runs after device is gone we will get use after free
- access of config while reset is in progress is racy
(as layout is changing).

As a solution
1. flush after reset when we know there will be no more interrupts
2. add a flag to disable config access before reset

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: add debugging if driver doesn't kick.

Under the existing #ifdef DEBUG, check that they don't have more than
1/10 of a second between an add_buf() and a
virtqueue_notify()/virtqueue_kick_prepare() call.

We could get false positives on a really busy system, but good for
development.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: expose added descriptors immediately.

A virtio driver does virtqueue_add_buf() multiple times before finally
calling virtqueue_kick(); previously we only exposed the added buffers
in the virtqueue_kick() call.  This means we don't need a memory
barrier in virtqueue_add_buf(), but it reduces concurrency as the
device (ie. host) can't see the buffers until the kick.

In the unusual (but now possible) case where a driver does add_buf()
and get_buf() without doing a kick, we do need to insert one before
our counter wraps.  Otherwise we could wrap num_added, and later on
not realize that we have passed the marker where we should have
kicked.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: avoid modulus operation.

Since we know vq->vring.num is a power of 2, modulus is lazy (it's asserted
in vring_new_virtqueue()).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio: support unlocked queue kick

Based on patch by Christoph for virtio_blk speedup:

Split virtqueue_kick to be able to do the actual notification
outside the lock protecting the virtqueue.  This patch was
originally done by Stefan Hajnoczi, but I can't find the
original one anymore and had to recreated it from memory.
Pointers to the original or corrections for the commit message
are welcome.

Stefan's patch was here:

https://github.com/stefanha/linux/commit/a6d06644e3a58e57a774e77d7dc34c4a5a2e7496
http://www.spinics.net/lists/linux-virtualization/msg14616.html

Third time's the charm!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>