Haren Myneni [Tue, 30 Aug 2016 04:34:57 +0000 (00:34 -0400)]
crypto: nx-842 - Mask XERS0 bit in return value
[ Upstream commit
6333ed8f26cf77311088d2e2b7cf16d8480bcbb2 ]
NX842 coprocessor sets 3rd bit in CR register with XER[S0] which is
nothing to do with NX request. Since this bit can be set with other
valuable return status, mast this bit.
One of other bits (INITIATED, BUSY or REJECTED) will be returned for
any given NX request.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew R. Ochs [Tue, 30 Aug 2016 04:34:55 +0000 (00:34 -0400)]
cxlflash: Fix to avoid virtual LUN failover failure
[ Upstream commit
d5e26bb1d812ba74f29b6bcbc88c3dbfb3eed824 ]
Applications which use virtual LUN's that are backed by a physical LUN
over both adapter ports may experience an I/O failure in the event of a
link loss (e.g. cable pull).
Virtual LUNs may be accessed through one or both ports of the adapter.
This access is encoded in the translation entries that comprise the
virtual LUN and used by the AFU for load-balancing I/O and handling
failover scenarios. In a link loss scenario, even though the AFU is able
to maintain connectivity to the LUN, it is up to the application to
retry the failed I/O. When applications are unaware of the virtual LUN's
underlying topology, they are unable to make a sound decision of when to
retry an I/O and therefore are forced to make their reaction to a failed
I/O absolute. The result is either a failure to retry I/O or increased
latency for scenarios where a retry is pointless.
To remedy this scenario, provide feedback back to the application on
virtual LUN creation as to which ports the LUN may be accessed. LUN's
spanning both ports are candidates for a retry in a presence of an I/O
failure.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj Kumar [Tue, 30 Aug 2016 04:34:54 +0000 (00:34 -0400)]
cxlflash: Fix to escalate LINK_RESET also on port 1
[ Upstream commit
a9be294ecb3b9dc82b15625631b153f871181d16 ]
The original fix to escalate a 'login timed out' error to a LINK_RESET
was only made for one of the two ports on the card. This fix resolves
the same issue for the second port (port 1).
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Alpe [Thu, 14 Jul 2016 14:02:07 +0000 (15:02 +0100)]
tipc: fix nl compat regression for link statistics
[ Upstream commit
55e77a3e8297581c919b45adcc4d0815b69afa84 ]
Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes
of the link name where left out.
Making the output of tipc-config -ls look something like:
Link statistics:
dcast-link
1:data0-1.1.2:data0
1:data0-1.1.3:data0
Also, for the record, the patch that introduce this regression
claims "Sending the whole object out can cause a leak". Which isn't
very likely as this is a compat layer, where the data we are parsing
is generated by us and we know the string to be NULL terminated. But
you can of course never be to secure.
Fixes: 5d2be1422e02 (tipc: fix an infoleak in tipc_nl_compat_link_dump)
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kangjie Lu [Thu, 14 Jul 2016 14:02:06 +0000 (15:02 +0100)]
tipc: fix an infoleak in tipc_nl_compat_link_dump
[ Upstream commit
5d2be1422e02ccd697ccfcd45c85b4a26e6178e2 ]
link_info.str is a char array of size 60. Memory after the NULL
byte is not initialized. Sending the whole object out can cause
a leak.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Wed, 13 Jul 2016 10:44:54 +0000 (11:44 +0100)]
netfilter: x_tables: check for size overflow
[ Upstream commit
d157bd761585605b7882935ffb86286919f62ea1 ]
Ben Hawkes says:
integer overflow in xt_alloc_table_info, which on 32-bit systems can
lead to small structure allocation and a copy_from_user based heap
corruption.
Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tedd Ho-Jeong An [Wed, 13 Jul 2016 08:13:23 +0000 (16:13 +0800)]
Bluetooth: Add support for Intel Bluetooth device 8265 [8087:0a2b]
[ Upstream commit
a0af53b511423cca93900066512379e21586d7dd ]
This patch adds support for Intel Bluetooth device 8265 also known
as Windstorm Peak (WsP).
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0a2b Rev= 0.10
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Thu, 7 Jul 2016 08:24:29 +0000 (16:24 +0800)]
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
[ Upstream commit
22f35042593c2b369861f0b9740efb8065a42db0 ]
Apparently some CHV boards failed to hook up the port presence straps
for HDMI ports as well (earlier we assumed this problem only affected
eDP ports). So let's check the VBT in addition to the strap, and if
either one claims that the port is present go ahead and register the
relevant connector.
While at it, change port D to register DP before HDMI as we do for ports
B and C since
commit
457c52d87e5d ("drm/i915: Only ignore eDP ports that are connected")
Also print a debug message when we register a HDMI connector to aid
in diagnosing missing/incorrect ports. We already had such a print for
DP/eDP.
v2: Improve the comment in the code a bit, note the port D change in
the commit message
Cc: Radoslav Duda <radosd@radosd.com>
Tested-by: Radoslav Duda <radosd@radosd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96321
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464945463-14364-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Thu, 7 Jul 2016 08:24:28 +0000 (16:24 +0800)]
drm/i915: Only ignore eDP ports that are connected
[ Upstream commit
457c52d87e5dac9a4cf1a6a287e60ea7645067d4 ]
If the VBT says that a certain port should be eDP (and hence fused off
from HDMI), but in reality it isn't, we need to try and acquire the HDMI
connection instead. So only trust the VBT edp setting if we can connect
to an eDP device on that port.
Fixes: d2182a6608 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV)
References: https://bugs.freedesktop.org/show_bug.cgi?id=96288
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Phidias Chiang <phidias.chiang@canonical.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464766070-31623-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Rojtberg [Fri, 1 Jul 2016 21:32:09 +0000 (17:32 -0400)]
Input: xpad - move pending clear to the correct location
[ Upstream commit
4efc6939a83c54fb3417541be48991afd0290ba3 ]
otherwise we lose ff commands: https://github.com/paroj/xpad/issues/27
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Goutham [Mon, 27 Jun 2016 10:00:02 +0000 (15:30 +0530)]
net: thunderx: Fix link status reporting
[ Upstream commit
3f4c68cfde30caa1f6d8368fd19590671411ade2 ]
Check for SMU RX local/remote faults along with SPU LINK
status. Otherwise at times link is UP at our end but DOWN
at link partner's side. Also due to an issue in BGX it's
rarely seen that initialization doesn't happen properly
and SMU RX reports faults with everything fine at SPU.
This patch tries to reinitialize LMAC to fix it.
Also fixed LMAC disable sequence to properly bring down link.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: Tao Wang <tao.wang@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Fri, 15 Apr 2016 13:50:32 +0000 (15:50 +0200)]
x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances
[ Upstream commit
1e2ae9ec072f3b7887f456426bc2cf23b80f661a ]
Generation2 instances don't support reporting the NMI status on port 0x61,
read from there returns 'ff' and we end up reporting nonsensical PCI
error (as there is no PCI bus in these instances) on all NMIs:
NMI: PCI system error (SERR) for reason ff on CPU 0.
Dazed and confused, but trying to continue
Fix the issue by overriding x86_platform.get_nmi_reason. Use 'booted on
EFI' flag to detect Gen2 instances.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Cathy Avery <cavery@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/1460728232-31433-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonidas Da Silva Barbosa [Mon, 27 Jun 2016 15:12:02 +0000 (09:12 -0600)]
crypto: vmx - IV size failing on skcipher API
[ Upstream commit
0d3d054b43719ef33232677ba27ba6097afdafbc ]
IV size was zero on CBC and CTR modes,
causing a bug triggered by skcipher.
Fixing this adding a correct size.
Signed-off-by: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: Paulo Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Schwarzott [Mon, 20 Jun 2016 12:22:12 +0000 (06:22 -0600)]
tda10071: Fix dependency to REGMAP_I2C
[ Upstream commit
b046d3ad38d90276379c862f15ddd99fa8739906 ]
Without I get this error for by dvb-card:
tda10071: Unknown symbol devm_regmap_init_i2c (err 0)
cx23885_dvb_register() dvb_register failed err = -22
cx23885_dev_setup() Failed to register dvb adapters on VID_B
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Blanchard [Fri, 10 Jun 2016 06:47:02 +0000 (16:47 +1000)]
crypto: vmx - Fix ABI detection
[ Upstream commit
975f57fdff1d0eb9816806cabd27162a8a1a4038 ]
When calling ppc-xlate.pl, we pass it either linux-ppc64 or
linux-ppc64le. The script however was expecting linux64le, a result
of its OpenSSL origins. This means we aren't obeying the ppc64le
ABIv2 rules.
Fix this by checking for linux-ppc64le.
Fixes: 5ca55738201c ("crypto: vmx - comply with ABIs that specify vrsave as reserved.")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paulo Flabiano Smorigo [Thu, 5 May 2016 14:09:27 +0000 (11:09 -0300)]
crypto: vmx - comply with ABIs that specify vrsave as reserved.
[ Upstream commit
5ca55738201c7ae1b556ad87bbb22c139ecc01dd ]
It gives significant improvements ( ~+15%) on some modes.
These code has been adopted from OpenSSL project in collaboration
with the original author (Andy Polyakov <appro@openssl.org>).
Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Tissoires [Tue, 14 Jun 2016 17:55:22 +0000 (10:55 -0700)]
HID: core: prevent out-of-bound readings
[ Upstream commit
50220dead1650609206efe91f0cc116132d59b3f ]
Plugging a Logitech DJ receiver with KASAN activated raises a bunch of
out-of-bound readings.
The fields are allocated up to MAX_USAGE, meaning that potentially, we do
not have enough fields to fit the incoming values.
Add checks and silence KASAN.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Fri, 3 Jun 2016 13:14:08 +0000 (07:14 -0600)]
lpfc: Fix DMA faults observed upon plugging loopback connector
[ Upstream commit
ae09c765109293b600ba9169aa3d632e1ac1a843 ]
Driver didn't program the REG_VFI mailbox correctly, giving the adapter
bad addresses.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Fri, 3 Jun 2016 13:42:17 +0000 (07:42 -0600)]
block: fix blk_rq_get_max_sectors for driver private requests
[ Upstream commit
f21018427cb007a0894c36ad702990ab639cbbb4 ]
Driver private request types should not get the artifical cap for the
FS requests. This is important to use the full device capabilities
for internal command or NVMe pass through commands.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jeff Lien <Jeff.Lien@hgst.com>
Tested-by: Jeff Lien <Jeff.Lien@hgst.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Updated by me to use an explicit check for the one command type that
does support extended checking, instead of relying on the ordering
of the enum command values - as suggested by Keith.
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ganapatrao Kulkarni [Wed, 25 May 2016 13:29:20 +0000 (15:29 +0200)]
irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
[ Upstream commit
fbf8f40e1658cb2f17452dbd3c708e329c5d27e0 ]
The erratum fixes the hang of ITS SYNC command by avoiding inter node
io and collections/cpu mapping on thunderx dual-socket platform.
This fix is only applicable for Cavium's ThunderX dual-socket platform.
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Sat, 4 Jun 2016 02:38:35 +0000 (20:38 -0600)]
clocksource: Allow unregistering the watchdog
[ Upstream commit
bbf66d897adf2bb0c310db96c97e8db6369f39e1 ]
Hyper-V vmbus module registers TSC page clocksource when loaded. This is
the clocksource with the highest rating and thus it becomes the watchdog
making unloading of the vmbus module impossible.
Separate clocksource_select_watchdog() from clocksource_enqueue_watchdog()
and use it on clocksource register/rating change/unregister.
After all, lobotomized monkeys may need some love too.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Link: http://lkml.kernel.org/r/1453483913-25672-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhao Lei [Fri, 27 May 2016 18:59:00 +0000 (14:59 -0400)]
btrfs: Continue write in case of can_not_nocow
[ Upstream commit
4da2e26a2a32b174878744bd0f07db180c875f26 ]
btrfs failed in xfstests btrfs/080 with -o nodatacow.
Can be reproduced by following script:
DEV=/dev/vdg
MNT=/mnt/tmp
umount $DEV &>/dev/null
mkfs.btrfs -f $DEV
mount -o nodatacow $DEV $MNT
dd if=/dev/zero of=$MNT/test bs=1 count=2048 &
btrfs subvolume snapshot -r $MNT $MNT/test_snap &
wait
--
We can see dd failed on NO_SPACE.
Reason:
__btrfs_buffered_write should run cow write when no_cow impossible,
and current code is designed with above logic.
But check_can_nocow() have 2 type of return value(0 and <0) on
can_not_no_cow, and current code only continue write on first case,
the second case happened in doing subvolume.
Fix:
Continue write when check_can_nocow() return 0 and <0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keith Busch [Thu, 26 May 2016 16:25:51 +0000 (10:25 -0600)]
blk-mq: End unstarted requests on dying queue
[ Upstream commit
a59e0f5795fe52dad42a99c00287e3766153b312 ]
Go directly to ending a request if it wasn't started. Previously, completing a
request may invoke a driver callback for a request it didn't initialize.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn at suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj N. Kumar [Mon, 23 May 2016 20:30:42 +0000 (14:30 -0600)]
cxlflash: Fix to resolve dead-lock during EEH recovery
[ Upstream commit
635f6b0893cff193a1774881ebb1e4a4b9a7fead ]
When a cxlflash adapter goes into EEH recovery and multiple processes
(each having established its own context) are active, the EEH recovery
can hang if the processes attempt to recover in parallel. The symptom
logged after a couple of minutes is:
INFO: task eehd:48 blocked for more than 120 seconds.
Not tainted 4.5.0-491-
26f710d+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
eehd 0 48 2
Call Trace:
__switch_to+0x2f0/0x410
__schedule+0x300/0x980
schedule+0x48/0xc0
rwsem_down_write_failed+0x294/0x410
down_write+0x88/0xb0
cxlflash_pci_error_detected+0x100/0x1c0 [cxlflash]
cxl_vphb_error_detected+0x88/0x110 [cxl]
cxl_pci_error_detected+0xb0/0x1d0 [cxl]
eeh_report_error+0xbc/0x130
eeh_pe_dev_traverse+0x94/0x160
eeh_handle_normal_event+0x17c/0x450
eeh_handle_event+0x184/0x370
eeh_event_handler+0x1c8/0x1d0
kthread+0x110/0x130
ret_from_kernel_thread+0x5c/0xa4
INFO: task blockio:33215 blocked for more than 120 seconds.
Not tainted 4.5.0-491-
26f710d+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
blockio 0 33215 33213
Call Trace:
0x1 (unreliable)
__switch_to+0x2f0/0x410
__schedule+0x300/0x980
schedule+0x48/0xc0
rwsem_down_read_failed+0x124/0x1d0
down_read+0x68/0x80
cxlflash_ioctl+0x70/0x6f0 [cxlflash]
scsi_ioctl+0x3b0/0x4c0
sg_ioctl+0x960/0x1010
do_vfs_ioctl+0xd8/0x8c0
SyS_ioctl+0xd4/0xf0
system_call+0x38/0xb4
INFO: task eehd:48 blocked for more than 120 seconds.
The hang is because of a 3 way dead-lock:
Process A holds the recovery mutex, and waits for eehd to complete.
Process B holds the semaphore and waits for the recovery mutex.
eehd waits for semaphore.
The fix is to have Process B above release the semaphore before
attempting to acquire the recovery mutex. This will allow
eehd to proceed to completion.
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Mon, 21 Mar 2016 23:38:18 +0000 (09:38 +1000)]
drm/radeon/mst: fix regression in lane/link handling.
[ Upstream commit
b36f7d26a7fdc0b07b1217368ee09bb8560269f8 ]
The function this used changed in
092c96a8ab9d1bd60ada2ed385cc364ce084180e
drm/radeon: fix dp link rate selection (v2)
However for MST we should just always train to the
max link/rate. Though we probably need to limit this
for future hw, in theory radeon won't support it.
This fixes my 30" monitor with MST enabled.
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Wed, 8 Jun 2016 18:20:33 +0000 (19:20 +0100)]
ecryptfs: fix handling of directory opening
[ Upstream commit
6a480a7842545ec520a91730209ec0bae41694c1 ]
First of all, trying to open them r/w is idiocy; it's guaranteed to fail.
Moreover, assigning ->f_pos and assuming that everything will work is
blatantly broken - try that with e.g. tmpfs as underlying layer and watch
the fireworks. There may be a non-trivial amount of state associated with
current IO position, well beyond the numeric offset. Using the single
struct file associated with underlying inode is really not a good idea;
we ought to open one for each ecryptfs directory struct file.
Additionally, file_operations both for directories and non-directories are
full of pointless methods; non-directories should *not* have ->iterate(),
directories should not have ->flush(), ->fasync() and ->splice_read().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maruthi Srinivas Bayyavarapu [Wed, 11 May 2016 12:16:36 +0000 (08:16 -0400)]
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
[ Upstream commit
8eb22214b7cb0c0a28be6caf3b81201629d8ea7c ]
This commit fixes garbled audio on Polaris-10/11 variants
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Mon, 9 May 2016 18:01:27 +0000 (12:01 -0600)]
drm: Balance error path for GEM handle allocation
[ Upstream commit
6984128d01cf935820a0563f3a00c6623ba58109 ]
The current error path for failure when establishing a handle for a GEM
object is unbalance, e.g. we call object_close() without calling first
object_open(). Use the typical onion structure to only undo what has
been set up prior to the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Thu, 14 Apr 2016 16:25:14 +0000 (10:25 -0600)]
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
[ Upstream commit
dd4e17ab704269bce71402285f5e8b9ac24b1eff ]
Recently, in commit
37cf4dc3370f I forgot to check if the timeval being passed
was actually a timespec (as is signaled with ADJ_NANO).
This resulted in that patch breaking ADJ_SETOFFSET users who set
ADJ_NANO, by rejecting valid timespecs that were compared with
valid timeval ranges.
This patch addresses this by checking for the ADJ_NANO flag and
using the timepsec check instead in that case.
Reported-by: Harald Hoyer <harald@redhat.com>
Reported-by: Kay Sievers <kay@vrfy.org>
Fixes: 37cf4dc3370f "time: Verify time values in adjtimex ADJ_SETOFFSET to avoid overflow"
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1453417415-19110-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Fri, 4 Dec 2015 03:09:31 +0000 (22:09 -0500)]
time: Verify time values in adjtimex ADJ_SETOFFSET to avoid overflow
[ Upstream commit
37cf4dc3370fbca0344e23bb96446eb2c3548ba7 ]
For adjtimex()'s ADJ_SETOFFSET, make sure the tv_usec value is
sane. We might multiply them later which can cause an overflow
and undefined behavior.
This patch introduces new helper functions to simplify the
checking code and adds comments to clarify
Orginally this patch was by Sasha Levin, but I've basically
rewritten it, so he should get credit for finding the issue
and I should get the blame for any mistakes made since.
Also, credit to Richard Cochran for the phrasing used in the
comment for what is considered valid here.
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Rojtberg [Wed, 9 Dec 2015 19:57:01 +0000 (11:57 -0800)]
Input: xpad - correctly handle concurrent LED and FF requests
[ Upstream commit
7fc595f4c02636eadaeeecfe7bbc45b57c173004 ]
Track the status of the irq_out URB to prevent submission iof new requests
while current one is active. Failure to do so results in the "URB submitted
while active" warning/stack trace.
Store pending brightness and FF effect in the driver structure and replace
it with the latest requests until the device is ready to process next
request. Alternate serving LED vs FF requests to make sure one does not
starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer
[2].
[1]: http://www.spinics.net/lists/linux-input/msg40708.html
[2]: http://www.spinics.net/lists/linux-input/msg31450.html
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Goutham [Tue, 16 Feb 2016 10:59:51 +0000 (16:29 +0530)]
net: thunderx: Fix receive packet stats
[ Upstream commit
ad2ecebd67d8a80fe5412d11df375a5ed2db7cd1 ]
Counting rx packets for every CQE_RX in CQ irq handler is incorrect.
Synchronization is missing when multiple queues are receiving packets
simultaneously. Like transmit packet stats use HW stats here.
Also removed unused 'cqe_type' parameter in nicvf_rcv_pkt_handler().
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Goutham [Tue, 16 Feb 2016 10:59:49 +0000 (16:29 +0530)]
net: thunderx: Fix for multiqset not configured upon interface toggle
[ Upstream commit
6a9bab79bb79bd9b2eda16f0aba1b4c43f677be9 ]
When a interface is assigned morethan 8 queues and the logical interface
is toggled i.e down & up, additional queues or qsets are not initialized
as secondary qset count is being set to zero while tearing down.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikas Shivappa [Thu, 10 Mar 2016 23:32:08 +0000 (15:32 -0800)]
perf/x86/cqm: Fix CQM memory leak and notifier leak
[ Upstream commit
ada2f634cd50d050269b67b4e2966582387e7c27 ]
Fixes the hotcpu notifier leak and other global variable memory leaks
during CQM (cache quality of service monitoring) initialization.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1457652732-4499-3-git-send-email-vikas.shivappa@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikas Shivappa [Thu, 10 Mar 2016 23:32:07 +0000 (15:32 -0800)]
perf/x86/cqm: Fix CQM handling of grouping events into a cache_group
[ Upstream commit
a223c1c7ab4cc64537dc4b911f760d851683768a ]
Currently CQM (cache quality of service monitoring) is grouping all
events belonging to same PID to use one RMID. However its not counting
all of these different events. Hence we end up with a count of zero
for all events other than the group leader.
The patch tries to address the issue by keeping a flag in the
perf_event.hw which has other CQM related fields. The field is updated
at event creation and during grouping.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
[peterz: Changed hw_perf_event::is_group_event to an int]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1457652732-4499-2-git-send-email-vikas.shivappa@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harald Freudenberger [Thu, 17 Mar 2016 13:52:17 +0000 (14:52 +0100)]
s390/crypto: provide correct file mode at device register.
[ Upstream commit
74b2375e6767935e6d9220bdbc6ed0db57f71a59 ]
When the prng device driver calls misc_register() there is the possibility
to also provide the recommented file permissions. This fix now gives
useful values (0644) where previously just the default was used (resulting
in 0600 for the device file).
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Weiner [Wed, 3 Feb 2016 00:57:29 +0000 (16:57 -0800)]
proc: revert /proc/<pid>/maps [stack:TID] annotation
[ Upstream commit
65376df582174ffcec9e6471bf5b0dd79ba05e4a ]
Commit
b76437579d13 ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.
Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.
The cost is not in proportion to the usefulness as described in the
patch.
Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.
The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.
Siddesh said:
"The end users needed a way to identify thread stacks programmatically and
there wasn't a way to do that. I'm afraid I no longer remember (or have
access to the resources that would aid my memory since I changed
employers) the details of their requirement. However, I did do this on my
own time because I thought it was an interesting project for me and nobody
really gave any feedback then as to its utility, so as far as I am
concerned you could roll back the main thread maps information since the
information is available in the thread-specific files"
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dasaratharaman Chandramouli [Fri, 5 Sep 2014 00:22:54 +0000 (17:22 -0700)]
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
[ Upstream commit
281baf7a702693deaa45c98ef0c5161006b48257 ]
Enables "Intel(R) Xeon Phi(TM) Processor x200 Product Family" support,
formerly code-named KNL. It is based on modified Intel Atom Silvermont
microarchitecture.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
[micah.barany@intel.com: adjusted values of residency and latency]
Signed-off-by: Micah Barany <micah.barany@intel.com>
[hubert.chrzaniuk@intel.com: removed deprecated CPUIDLE_FLAG_TIME_VALID flag]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Pawel Karczewski <pawel.karczewski@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj N. Kumar [Fri, 4 Mar 2016 21:55:19 +0000 (15:55 -0600)]
cxlflash: Fix to avoid unnecessary scan with internal LUNs
[ Upstream commit
603ecce95f4817074a724a889cd88c3c8210f933 ]
When switching to the internal LUN defined on the
IBM CXL flash adapter, there is an unnecessary
scan occurring on the second port. This scan leads
to the following extra lines in the log:
Dec 17 10:09:00 tul83p1 kernel: [ 3708.561134] cxlflash 0008:00:00.0: cxlflash_queuecommand: (scp=
c0000000fc1f0f00) 11/1/0/0 cdb=(
A0000000-
00000000-
10000000-
00000000)
Dec 17 10:09:00 tul83p1 kernel: [ 3708.561147] process_cmd_err: cmd failed afu_rc=32 scsi_rc=0 fc_rc=0 afu_extra=0xE, scsi_extra=0x0, fc_extra=0x0
By definition, both of the internal LUNs are on the first port/channel.
When the lun_mode is switched to internal LUN the
same value for host->max_channel is retained. This
causes an unnecessary scan over the second port/channel.
This fix alters the host->max_channel to 0 (1 port), if internal
LUNs are configured and switches it back to 1 (2 ports) while
going back to external LUNs.
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Thu, 28 Jan 2016 06:29:36 +0000 (22:29 -0800)]
Drivers: hv: vmbus: don't manipulate with clocksources on crash
[ Upstream commit
3ccb4fd8f492f99aece21acc1bd6142275f26236 ]
clocksource_change_rating() involves mutex usage and can't be called
in interrupt context. It also makes sense to avoid doing redundant work
on crash.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Thu, 28 Jan 2016 06:29:35 +0000 (22:29 -0800)]
Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()
[ Upstream commit
415719160de3fae3bb9cbc617664649919cd00d0 ]
We have to call vmbus_initiate_unload() on crash to make kdump work but
the crash can also be happening in interrupt (e.g. Sysrq + c results in
such) where we can't schedule or the following will happen:
[ 314.905786] bad: scheduling from the idle thread!
Just skipping the wait (and even adding some random wait here) won't help:
to make host-side magic working we're supposed to receive CHANNELMSG_UNLOAD
(and actually confirm the fact that we received it) but we can't use
interrupt-base path (vmbus_isr()-> vmbus_on_msg_dpc()). Implement a simple
busy wait ignoring all the other messages and use it if we're in an
interrupt context.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Thu, 28 Jan 2016 06:29:34 +0000 (22:29 -0800)]
Drivers: hv: vmbus: avoid infinite loop in init_vp_index()
[ Upstream commit
79fd8e706637a5c7c41f9498fe0fbfb437abfdc8 ]
When we pick a CPU to use for a new subchannel we try find a non-used one
on the appropriate NUMA node, we keep track of them with the
primary->alloced_cpus_in_node mask. Under normal circumstances we don't run
out of available CPUs but it is possible when we we don't initialize some
cpus in Linux, e.g. when we boot with 'nr_cpus=' limitation.
Avoid the infinite loop in init_vp_index() by checking that we still have
non-used CPUs in the alloced_cpus_in_node mask and resetting it in case
we don't.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ching Huang [Wed, 25 Nov 2015 11:41:23 +0000 (19:41 +0800)]
arcmsr: fixes not release allocated resource
[ Upstream commit
98f90debc2b64a40a416dd9794ac2d8de6b43af2 ]
Releasing allocated resource if get configuration data failed.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ching Huang [Wed, 25 Nov 2015 11:36:02 +0000 (19:36 +0800)]
arcmsr: fixed getting wrong configuration data
[ Upstream commit
251e2d25bfb72b69edd414abfa42a41191d9657a ]
Fixed getting wrong configuration data of adapter type B and type D.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gerald Schaefer [Mon, 16 Nov 2015 13:35:48 +0000 (14:35 +0100)]
s390/pci_dma: fix DMA table corruption with > 4 TB main memory
[ Upstream commit
69eea95c48857c9dfcac120d6acea43027627b28 ]
DMA addresses returned from map_page() are calculated by using an iommu
bitmap plus a start_dma offset. The size of this bitmap is based on the main
memory size. If we have more than (4 TB - start_dma) main memory, the DMA
address calculation will also produce addresses > 4 TB. Such addresses
cannot be inserted in the 3-level DMA page table, instead the entries
modulo 4 TB will be overwritten.
Fix this by restricting the iommu bitmap size to (4 TB - start_dma).
Also set zdev->end_dma to the actual end address of the usable
range, instead of the theoretical maximum as reported by the hardware,
which fixes a sanity check in dma_map() and also the IOMMU API domain
geometry aperture calculation.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gal Pressman [Tue, 1 Mar 2016 22:13:38 +0000 (00:13 +0200)]
net/mlx5e: Don't modify CQ before it was created
[ Upstream commit
2fcb92fbd04eef26dfe7e67839da6262d83d6b65 ]
Calling mlx5e_set_coalesce while the interface is down will result in
modifying CQs that don't exist.
Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4
Ethernet functionality')
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gal Pressman [Tue, 1 Mar 2016 22:13:37 +0000 (00:13 +0200)]
net/mlx5e: Don't try to modify CQ moderation if it is not supported
[ Upstream commit
7524a5d88b94afef8397a79f1e664af5b7052c22 ]
If CQ moderation is not supported by the device, print a warning on
netdevice load, and return error when trying to modify/query cq
moderation via ethtool.
Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4
Ethernet functionality')
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Thu, 26 Nov 2015 12:00:46 +0000 (14:00 +0200)]
mmc: sdhci: Do not BUG on invalid vdd
[ Upstream commit
9d5de93f6d543b356e39e225988ef443a7bce34c ]
The driver may not be able to set the power correctly but that
is not a reason to BUG().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aviv Greenberg [Fri, 16 Oct 2015 11:48:51 +0000 (08:48 -0300)]
UVC: Add support for R200 depth camera
[ Upstream commit
5d8d8db851ef81337e7026b32a9d5a9cfb2271d5 ]
Add support for Intel R200 depth camera in uvc driver.
This includes adding new uvc GUIDs for the new pixel formats,
adding new V4L pixel format definition to user api headers,
and updating the uvc driver GUID-to-4cc tables with the new formats.
Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com>
Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin Guo [Wed, 20 Jan 2016 04:36:58 +0000 (12:36 +0800)]
sched/numa: Fix use-after-free bug in the task_numa_compare
[ Upstream commit
1dff76b92f69051e579bdc131e01500da9fa2a91 ]
The following message can be observed on the Ubuntu v3.13.0-65 with KASan
backported:
==================================================================
BUG: KASan: use after free in task_numa_find_cpu+0x64c/0x890 at addr
ffff880dd393ecd8
Read of size 8 by task qemu-system-x86/
3998900
=============================================================================
BUG kmalloc-128 (Tainted: G B ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in task_numa_fault+0xc1b/0xed0 age=41980 cpu=18 pid=
3998890
__slab_alloc+0x4f8/0x560
__kmalloc+0x1eb/0x280
task_numa_fault+0xc1b/0xed0
do_numa_page+0x192/0x200
handle_mm_fault+0x808/0x1160
__do_page_fault+0x218/0x750
do_page_fault+0x1a/0x70
page_fault+0x28/0x30
SyS_poll+0x66/0x1a0
system_call_fastpath+0x1a/0x1f
INFO: Freed in task_numa_free+0x1d2/0x200 age=62 cpu=18 pid=0
__slab_free+0x2ab/0x3f0
kfree+0x161/0x170
task_numa_free+0x1d2/0x200
finish_task_switch+0x1d2/0x210
__schedule+0x5d4/0xc60
schedule_preempt_disabled+0x40/0xc0
cpu_startup_entry+0x2da/0x340
start_secondary+0x28f/0x360
Call Trace:
[<
ffffffff81a6ce35>] dump_stack+0x45/0x56
[<
ffffffff81244aed>] print_trailer+0xfd/0x170
[<
ffffffff8124ac36>] object_err+0x36/0x40
[<
ffffffff8124cbf9>] kasan_report_error+0x1e9/0x3a0
[<
ffffffff8124d260>] kasan_report+0x40/0x50
[<
ffffffff810dda7c>] ? task_numa_find_cpu+0x64c/0x890
[<
ffffffff8124bee9>] __asan_load8+0x69/0xa0
[<
ffffffff814f5c38>] ? find_next_bit+0xd8/0x120
[<
ffffffff810dda7c>] task_numa_find_cpu+0x64c/0x890
[<
ffffffff810de16c>] task_numa_migrate+0x4ac/0x7b0
[<
ffffffff810de523>] numa_migrate_preferred+0xb3/0xc0
[<
ffffffff810e0b88>] task_numa_fault+0xb88/0xed0
[<
ffffffff8120ef02>] do_numa_page+0x192/0x200
[<
ffffffff81211038>] handle_mm_fault+0x808/0x1160
[<
ffffffff810d7dbd>] ? sched_clock_cpu+0x10d/0x160
[<
ffffffff81068c52>] ? native_load_tls+0x82/0xa0
[<
ffffffff81a7bd68>] __do_page_fault+0x218/0x750
[<
ffffffff810c2186>] ? hrtimer_try_to_cancel+0x76/0x160
[<
ffffffff81a6f5e7>] ? schedule_hrtimeout_range_clock.part.24+0xf7/0x1c0
[<
ffffffff81a7c2ba>] do_page_fault+0x1a/0x70
[<
ffffffff81a772e8>] page_fault+0x28/0x30
[<
ffffffff8128cbd4>] ? do_sys_poll+0x1c4/0x6d0
[<
ffffffff810e64f6>] ? enqueue_task_fair+0x4b6/0xaa0
[<
ffffffff810233c9>] ? sched_clock+0x9/0x10
[<
ffffffff810cf70a>] ? resched_task+0x7a/0xc0
[<
ffffffff810d0663>] ? check_preempt_curr+0xb3/0x130
[<
ffffffff8128b5c0>] ? poll_select_copy_remaining+0x170/0x170
[<
ffffffff810d3bc0>] ? wake_up_state+0x10/0x20
[<
ffffffff8112a28f>] ? drop_futex_key_refs.isra.14+0x1f/0x90
[<
ffffffff8112d40e>] ? futex_requeue+0x3de/0xba0
[<
ffffffff8112e49e>] ? do_futex+0xbe/0x8f0
[<
ffffffff81022c89>] ? read_tsc+0x9/0x20
[<
ffffffff8111bd9d>] ? ktime_get_ts+0x12d/0x170
[<
ffffffff8108f699>] ? timespec_add_safe+0x59/0xe0
[<
ffffffff8128d1f6>] SyS_poll+0x66/0x1a0
[<
ffffffff81a830dd>] system_call_fastpath+0x1a/0x1f
As commit
1effd9f19324 ("sched/numa: Fix unsafe get_task_struct() in
task_numa_assign()") points out, the rcu_read_lock() cannot protect the
task_struct from being freed in the finish_task_switch(). And the bug
happens in the process of calculation of imp which requires the access of
p->numa_faults being freed in the following path:
do_exit()
current->flags |= PF_EXITING;
release_task()
~~delayed_put_task_struct()~~
schedule()
...
...
rq->curr = next;
context_switch()
finish_task_switch()
put_task_struct()
__put_task_struct()
task_numa_free()
The fix here to get_task_struct() early before end of dst_rq->lock to
protect the calculation process and also put_task_struct() in the
corresponding point if finally the dst_rq->curr somehow cannot be
assigned.
Additional credit to Liang Chen who helped fix the error logic and add the
put_task_struct() to the place it missed.
Signed-off-by: Gavin Guo <gavin.guo@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jay.vosburgh@canonical.com
Cc: liang.chen@canonical.com
Link: http://lkml.kernel.org/r/1453264618-17645-1-git-send-email-gavin.guo@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Libin Yang [Thu, 14 Jan 2016 06:09:00 +0000 (14:09 +0800)]
ALSA: hda - add codec support for Kabylake display audio codec
[ Upstream commit
91815d8aa7e2f45d30e51caa297061ad893628d9 ]
This patch adds codec ID (0x8086280b) for Kabylake display codec
and apply the hsw fix-ups to Kabylake.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 10 Feb 2016 17:59:05 +0000 (19:59 +0200)]
drm/i915: Fix hpd live status bits for g4x
[ Upstream commit
0780cd36c7af70c55981ee624084f0f48cae9b95 ]
Looks like g4x hpd live status bits actually agree with the spec. At
least they do on the machine I have, and apparently on Nick Bowler's
g4x as well.
So gm45 may be the only platform where they don't agree. At least
that seems to be the case based on the (somewhat incomplete)
logs/dumps in [1], and Daniel has also tested this on his gm45
sometime in the past.
So let's change the bits to match the spec on g4x. That actually makes
the g4x bits identical to vlv/chv so we can just share the code
between those platforms, leaving gm45 as the special case.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=52361
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Nick Bowler <nbowler@draconx.ca>
References: https://lists.freedesktop.org/archives/dri-devel/2016-February/100382.html
Reported-by: Nick Bowler <nbowler@draconx.ca>
Cc: stable@vger.kernel.org
Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455127145-20087-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parthasarathy Bhuvaragan [Thu, 3 Mar 2016 16:54:54 +0000 (17:54 +0100)]
tipc: fix nullptr crash during subscription cancel
[ Upstream commit
4de13d7ed6ffdcbb34317acaa9236f121176f5f8 ]
commit
4d5cfcba2f6e ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().
This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.
In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.
Fixes: 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel')
Reported-by: Anders Widell <anders.widell@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Pinski [Thu, 25 Feb 2016 01:44:57 +0000 (17:44 -0800)]
arm64: Add workaround for Cavium erratum 27456
[ Upstream commit
104a0c02e8b1936c049e18a6d4e4ab040fb61213 ]
On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
instructions may cause the icache to become corrupted if it contains
data for a non-current ASID.
This patch implements the workaround (which invalidates the local
icache when switching the mm) by using code patching.
Signed-off-by: Andrew Pinski <apinski@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunil Goutham [Wed, 24 Feb 2016 11:10:50 +0000 (16:40 +0530)]
net: thunderx: Fix for Qset error due to CQ full
[ Upstream commit
4c0b6eaf373a5323f03a3a20c42fc435715b073d ]
On Thunderx pass 1.x and pass2 due to a HW errata default CQ
DROP_LEVEL of 0x80 is not sufficient to avoid CQ_WR_FULL Qset
error when packets are being received at >20Mpps resulting in
complete stall of packet reception.
This patch will configure it to 0x100 which is what is expected
by HW on Thunderx. On future passes of thunderx and other chips
HW default/reset value will be 0x100 or higher hence not overwritten.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Thu, 17 Dec 2015 15:23:34 +0000 (10:23 -0500)]
drm/radeon: fix dp link rate selection (v2)
[ Upstream commit
092c96a8ab9d1bd60ada2ed385cc364ce084180e ]
Need to properly handle the max link rate in the dpcd.
This prevents some cases where 5.4 Ghz is selected when
it shouldn't be.
v2: simplify logic, add array bounds check
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Thu, 17 Dec 2015 14:57:49 +0000 (09:57 -0500)]
drm/amdgpu: fix dp link rate selection (v2)
[ Upstream commit
41869c1c7fe583dec932eb3d87de2e010b30a737 ]
Need to properly handle the max link rate in the dpcd.
This prevents some cases where 5.4 Ghz is selected when
it shouldn't be.
v2: simplify logic, add array bounds check
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Swapnil Nagle [Thu, 4 Feb 2016 16:45:17 +0000 (11:45 -0500)]
qla2xxx: Use ATIO type to send correct tmr response
[ Upstream commit
d7236ac368212bd6fc8b45f050136ee53e6a6f2d ]
The function value inside se_cmd can change if the TMR is cancelled.
Use original ATIO Type to correctly determine CTIO response.
Signed-off-by: Swapnil Nagle <swapnil.nagle@purestroage.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Thu, 26 Nov 2015 12:00:49 +0000 (14:00 +0200)]
mmc: sdhci: 64-bit DMA actually has 4-byte alignment
[ Upstream commit
04a5ae6fdd018af29675eb8b6c2550c87f471570 ]
The version 3.00 SDHCI spec. was a bit unclear about the
required data alignment for 64-bit DMA, whereas the version
4.10 spec. uses different language and indicates that only
4-byte alignment is required rather than the 8-byte alignment
currently implemented. That make no difference to SD and EMMC
which invariably transfer data in sector-aligned blocks.
However with SDIO, it results in using more DMA descriptors
than necessary. Theoretically that slows DMA slightly although
DMA is not the limiting factor for throughput, so there is no
discernable impact on performance. Nevertheless, the driver
should follw the spec unless there is good reason not to, so
this patch corrects the alignment criterion.
There is a more complicated criterion for the DMA descriptor
table itself. However the table is allocated by dma_alloc_coherent()
which allocates pages (i.e. aligned to a page boundary).
For simplicity just check it is 8-byte aligned, but add a comment
that some Intel controllers actually require 8-byte alignment
even when using 32-bit DMA.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maarten Lankhorst [Thu, 7 Jan 2016 09:59:21 +0000 (10:59 +0100)]
drm/atomic: Do not unset crtc when an encoder is stolen
[ Upstream commit
97a8df90875f72ba3b4c3320759fd93cea743261 ]
While we steal the encoder away from the connector the connector may
be updated to use a different encoder.
Without this change if 2 connectors swap encoders one of them will
end up without a crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-5-git-send-email-maarten.lankhorst@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michał Winiarski [Fri, 5 Feb 2016 12:21:42 +0000 (13:21 +0100)]
drm/i915/skl: Add missing SKL ids
[ Upstream commit
7157bb27e79875db5603aa1e30f56e873a8300f9 ]
Used by production devices:
Intel(R) Iris Graphics 540 (Skylake GT3e)
Intel(R) Iris Graphics 550 (Skylake GT3e)
v2: More ids
v3: Less ids (GT1 got duplicated)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1454674902-26207-1-git-send-email-michal.winiarski@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Thu, 28 Jan 2016 14:04:12 +0000 (16:04 +0200)]
drm/i915/bxt: update list of PCIIDs
[ Upstream commit
985dd4360fdf2533fe48a33a4a2094f2e4718dc0 ]
Add PCIIDs for new versions of the SOC, based on BSpec. Also add the
name of the versions as code comment where this is available. The new
versions don't have any changes visible to the kernel driver.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453989852-13569-1-git-send-email-imre.deak@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Fri, 15 Jan 2016 17:41:09 +0000 (17:41 +0000)]
hrtimer: Catch illegal clockids
[ Upstream commit
9006a01829a50cfd6bbd4980910ed46e895e93d7 ]
It is way too easy to take any random clockid and feed it to
the hrtimer subsystem. At best, it gets mapped to a monotonic
base, but it would be better to just catch illegal values as
early as possible.
This patch does exactly that, mapping illegal clockids to an
illegal base index, and panicing when we detect the illegal
condition.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Link: http://lkml.kernel.org/r/1452879670-16133-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anjali Singhai Jain [Wed, 9 Dec 2015 23:50:24 +0000 (15:50 -0800)]
i40e/i40evf: Fix RSS rx-flow-hash configuration through ethtool
[ Upstream commit
6e35c04cf633e55648acb9ccabff42aa37bd4044 ]
This patch fixes the Hash PCTYPE enable for X722 since it supports
a broader selection of PCTYPES for TCP and UDP.
This patch also fixes a bug in XL710, X710, X722 support for RSS,
as of now we cannot reduce the (4)tuple for RSS for TCP/IPv4/IPV6 or
UDP/IPv4/IPv6 packets since this requires a product feature change
that comes in a later release.
A VF should never be allowed to change the tuples for RSS for any
PCTYPE since that's a global setting for the device in case of i40e
devices.
Change-ID: I0ee7203c9b24813260f58f3220798bc9d9ac4a12
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suganath prabu Subramani [Thu, 28 Jan 2016 06:37:06 +0000 (12:07 +0530)]
mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO.
[ Upstream commit
03d1fb3a65783979f23bd58b5a0387e6992d9e26 ]
Track msix of each IO and use the same msix for issuing abort to timed
out IO. With this driver will process IO's reply first followed by TM.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Henzl [Wed, 23 Dec 2015 13:21:47 +0000 (14:21 +0100)]
mpt3sas: A correction in unmap_resources
[ Upstream commit
5f985d88bac34e7f3b4403118eab072902a0b392 ]
It might happen that we try to free an already freed pointer.
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Chaitra P B <chaitra.basappa@avagotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 5 Feb 2016 16:30:39 +0000 (16:30 +0000)]
net: cavium: liquidio: fix check for in progress flag
[ Upstream commit
19a6d156a7bd080f3a855a40a4a08ab475e34b4a ]
smatch detected a suspicious looking bitop condition:
drivers/net/ethernet/cavium/liquidio/lio_main.c:2529
handle_timestamp() warn: suspicious bitop condition
(skb_shinfo(skb)->tx_flags | SKBTX_IN_PROGRESS is always non-zero,
so the logic is definitely not correct. Use & to mask the correct
bit.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tirumalesh Chalamarla [Wed, 10 Feb 2016 18:46:53 +0000 (10:46 -0800)]
arm64: KVM: Configure TCR_EL2.PS at runtime
[ Upstream commit
3c5b1d92b3b02be07873d611a27950addff544d3 ]
Setting TCR_EL2.PS to 40 bits is wrong on systems with less that
less than 40 bits of physical addresses. and breaks KVM on systems
where the RAM is above 40 bits.
This patch uses ID_AA64MMFR0_EL1.PARange to set TCR_EL2.PS dynamically,
just like we already do for VTCR_EL2.PS.
[Marc: rewrote commit message, patch tidy up]
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tirumalesh Chalamarla [Thu, 4 Feb 2016 18:45:25 +0000 (10:45 -0800)]
irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
[ Upstream commit
1a1ebd5fb1e203ee8cc73508cc7a38ac4b804596 ]
The ARM GICv3 specification mentions the need for dsb after a read
from the ICC_IAR1_EL1 register:
4.1.1 Physical CPU Interface:
The effects of reading ICC_IAR0_EL1 and ICC_IAR1_EL1
on the state of a returned INTID are not guaranteed
to be visible until after the execution of a DSB.
Not having this could result in missed interrupts, so let's add the
required barrier.
[Marc: fixed commit message]
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Tirumalesh Chalamarla <tchalamarla@caviumnetworks.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladimir Zapolskiy [Sun, 6 Dec 2015 11:32:01 +0000 (13:32 +0200)]
pwm: lpc32xx: fix and simplify duty cycle and period calculations
[ Upstream commit
5a9fc9c666d5d759699cf5495bda85f1da0d747e ]
The change fixes a problem, if duty_ns is too small in comparison
to period_ns (as a valid corner case duty_ns is 0 ns), then due to
PWM_DUTY() macro applied on a value the result is overflowed over 8
bits, and instead of the highest bitfield duty cycle value 0xff the
invalid duty cycle bitfield value 0x00 is written.
For reference the LPC32xx spec defines PWMx_DUTY bitfield description
is this way and it seems to be correct:
[Low]/[High] = [PWM_DUTY]/[256-PWM_DUTY], where 0 < PWM_DUTY <= 255.
In addition according to my oscilloscope measurements LPC32xx PWM is
"tristate" in sense that it produces a wave with floating min/max
voltage levels for different duty cycle values, for corner cases:
PWM_DUTY == 0x01 => signal is in range from -1.05v to 0v
....
PWM_DUTY == 0x80 => signal is in range from -0.75v to +0.75v
....
PWM_DUTY == 0xff => signal is in range from 0v to +1.05v
PWM_DUTY == 0x00 => signal is around 0v, PWM is off
Due to this peculiarity on very long period ranges (less than 1KHz)
and odd pre-divider values PWM generated wave does not remind a
clock shape signal, but rather a heartbit shape signal with positive
and negative peaks, so I would recommend to use high-speed HCLK clock
as a PWM parent clock and avoid using RTC clock as a parent.
The change corrects PWM output in corner cases and prevents any
possible overflows in calculation of values for PWM_DUTY and
PWM_RELOADV bitfields, thus helper macro definitions may be removed.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladimir Zapolskiy [Sun, 6 Dec 2015 11:31:59 +0000 (13:31 +0200)]
pwm: lpc32xx: correct number of PWM channels from 2 to 1
[ Upstream commit
ebe1fca35038df28b5c183e8486863e765364ec1 ]
LPC32xx SoC has two independent PWM controllers, they have different
clock parents, clock gates and even slightly different controls, and
each of these two PWM controllers has one output channel. Due to
almost similar controls arranged in a row it is incorrectly set that
there is one PWM controller with two channels, fix this problem, which
at the moment prevents separate configuration of different clock
parents and gates for both PWM controllers.
The change makes previous PWM device node description incompatible
with this update.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Agner [Mon, 23 Nov 2015 22:45:07 +0000 (14:45 -0800)]
pwm: fsl-ftm: Fix clock enable/disable when using PM
[ Upstream commit
816aec2325e620b6454474372a21f90a8740cb28 ]
A FTM PWM instance enables/disables three clocks: The bus clock, the
counter clock and the PWM clock. The bus clock gets enabled on
pwm_request, whereas the counter and PWM clocks will be enabled upon
pwm_enable.
The driver has three closesly related issues when enabling/disabling
clocks during suspend/resume:
- The three clocks are not treated differently in regards to the
individual PWM state enabled/requested. This can lead to clocks
getting disabled which have not been enabled in the first place
(a PWM channel which only has been requested going through
suspend/resume).
- When entering suspend, the current behavior relies on the
FTM_OUTMASK register: If a PWM output is unmasked, the driver
assumes the clocks are enabled. However, some PWM instances
have only 2 channels connected (e.g. Vybrid's FTM1). In that case,
the FTM_OUTMASK reads 0x3 if all channels are disabled, even if
the code wrote 0xff to it before. For those PWM instances, the
current approach to detect enabled PWM signals does not work.
- A third issue applies to the bus clock only, which can get enabled
multiple times (once for each PWM channel of a PWM chip). This is
fine, however when entering suspend mode, the clock only gets
disabled once.
This change introduces a different approach by relying on the enable
and prepared counters of the clock framework and using the frameworks
PWM signal states to address all three issues.
Clocks get disabled during suspend and back enabled on resume
regarding to the PWM channels individual state (requested/enabled).
Since we do not count the clock enables in the driver, this change no
longer clears the Status and Control registers Clock Source Selection
(FTM_SC[CLKS]). However, since we disable the selected clock anyway,
and we explicitly select the clock source on reenabling a PWM channel
this approach should not make a difference in practice.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Henzl [Mon, 1 Feb 2016 14:12:04 +0000 (15:12 +0100)]
megaraid_sas: Add an i/o barrier
[ Upstream commit
b99dbe56d511eb07de33bfa1b99ac5a6ff76ae08 ]
A barrier should be added to ensure proper ordering of memory mapped
writes.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sumit Saxena [Thu, 28 Jan 2016 15:44:26 +0000 (21:14 +0530)]
megaraid_sas: Fix SMAP issue
[ Upstream commit
ea1c928bb6051ec4ccf24826898aa2361eaa71e5 ]
Inside compat IOCTL hook of driver, driver was using wrong address of
ioc->frame.raw which leads sense_ioc_ptr to be calculated wrongly and
failing IOCTL.
Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sumit Saxena [Thu, 28 Jan 2016 15:34:22 +0000 (21:04 +0530)]
megaraid_sas: Do not allow PCI access during OCR
[ Upstream commit
11c71cb4ab7cd901b9d6f0ff267c102778c1c8ef ]
This patch will do synhronization between OCR function and AEN function
using "reset_mutex" lock. reset_mutex will be acquired only in the
first half of the AEN function which issues a DCMD. Second half of the
function which calls SCSI API (scsi_add_device/scsi_remove_device)
should be out of reset_mutex to avoid deadlock between scsi_eh thread
and driver.
During chip reset (inside OCR function), there should not be any PCI
access and AEN function (which is called in delayed context) may be
firing DCMDs (doing PCI writes) when chip reset is happening in parallel
which will cause FW fault. This patch will solve the problem by making
AEN thread and OCR thread mutually exclusive.
Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Ott [Mon, 25 Jan 2016 09:32:51 +0000 (10:32 +0100)]
s390/cio: update measurement characteristics
[ Upstream commit
9f3d6d7a40a178b8a5b5274f4e55fec8c30147c9 ]
Per channel path measurement characteristics are obtained during channel
path registration. However if some properties of a channel path change
we don't update the measurement characteristics.
Make sure to update the characteristics when we change the properties of
a channel path or receive a notification from FW about such a change.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Ott [Mon, 25 Jan 2016 09:31:33 +0000 (10:31 +0100)]
s390/cio: ensure consistent measurement state
[ Upstream commit
61f0bfcf8020f02eb09adaef96745d1c1d1b3623 ]
Make sure that in all cases where we could not obtain measurement
characteristics the associated fields are set to invalid values.
Note: without this change the "shared" capability of a channel path
for which we could not obtain the measurement characteristics was
incorrectly displayed as 0 (not shared). We will now correctly
report "unknown" in this case.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Ott [Mon, 25 Jan 2016 09:30:27 +0000 (10:30 +0100)]
s390/cio: fix measurement characteristics memleak
[ Upstream commit
0d9bfe9123cfde59bf5c2e375b59d2a7d5061c4c ]
Measurement characteristics are allocated during channel path
registration but not freed during deregistration. Fix this by
embedding these characteristics inside struct channel_path.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ursula Braun [Fri, 11 Dec 2015 11:27:55 +0000 (12:27 +0100)]
qeth: initialize net_device with carrier off
[ Upstream commit
e5ebe63214d44d4dcf43df02edf3613e04d671b9 ]
/sys/class/net/<interface>/operstate for an active qeth network
interface offen shows "unknown", which translates to "state UNKNOWN
in output of "ip link show". It is caused by a missing initialization
of the __LINK_STATE_NOCARRIER bit in the net_device state field.
This patch adds a netif_carrier_off() invocation when creating the
net_device for a qeth device.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reference-ID: Bugzilla 133209
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:12:04 +0000 (18:12 -0500)]
lpfc: Fix external loopback failure.
[ Upstream commit
4360ca9c24388e44cb0e14861a62fff43cf225c0 ]
Fix external loopback failure.
Rx sequence reassembly was incorrect.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:12:03 +0000 (18:12 -0500)]
lpfc: Fix mbox reuse in PLOGI completion
[ Upstream commit
01c73bbcd7cc4f31f45a1b0caeacdba46acd9c9c ]
Fix mbox reuse in PLOGI completion. Moved allocations so that buffer
properly init'd.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:11:59 +0000 (18:11 -0500)]
lpfc: Fix RDP Speed reporting.
[ Upstream commit
81e7517723fc17396ba91f59312b3177266ddbda ]
Fix RDP Speed reporting.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:11:57 +0000 (18:11 -0500)]
lpfc: Fix crash in fcp command completion path.
[ Upstream commit
c90261dcd86e4eb5c9c1627fde037e902db8aefa ]
Fix crash in fcp command completion path.
Missed null check.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:11:56 +0000 (18:11 -0500)]
lpfc: Fix driver crash when module parameter lpfc_fcp_io_channel set to 16
[ Upstream commit
6690e0d4fc5cccf74534abe0c9f9a69032bc02f0 ]
Fix driver crash when module parameter lpfc_fcp_io_channel set to 16
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:11:55 +0000 (18:11 -0500)]
lpfc: Fix RegLogin failed error seen on Lancer FC during port bounce
[ Upstream commit
4b7789b71c916f79a3366da080101014473234c3 ]
Fix RegLogin failed error seen on Lancer FC during port bounce
Fix the statemachine and ref counting.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:11:53 +0000 (18:11 -0500)]
lpfc: Fix the FLOGI discovery logic to comply with T11 standards
[ Upstream commit
d6de08cc46269899988b4f40acc7337279693d4b ]
Fix the FLOGI discovery logic to comply with T11 standards
We weren't properly setting fabric parameters, such as R_A_TOV and E_D_TOV,
when we registered the vfi object in default configs and pt2pt configs.
Revise to now pass service params with the values to the firmware and
ensure they are reset on link bounce. Required reworking the call sequence
in the discovery threads.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Wed, 16 Dec 2015 23:11:52 +0000 (18:11 -0500)]
lpfc: Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get.
[ Upstream commit
f5cb5304eb26d307c9b30269fb0e007e0b262b7d ]
Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uma Krishnan [Mon, 7 Dec 2015 22:03:32 +0000 (16:03 -0600)]
cxl: Enable PCI device ID for future IBM CXL adapter
[ Upstream commit
68adb7bfd66504e97364651fb7dac3f9c8aa8561 ]
Add support for future IBM Coherent Accelerator (CXL) device
with ID of 0x0601.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Fri, 8 Jan 2016 18:30:09 +0000 (10:30 -0800)]
cxl: fix build for GCC 4.6.x
[ Upstream commit
aa09545589ceeff884421d8eb38d04963190afbe ]
GCC 4.6.3 does not support -Wno-unused-const-variable. Instead, use the
kbuild infrastructure that checks if this options exists.
Fixes: 2cd55c68c0a4 ("cxl: Fix build failure due to -Wunused-variable behaviour change")
Suggested-by: Michal Marek <mmarek@suse.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj Kumar [Mon, 14 Dec 2015 21:07:43 +0000 (15:07 -0600)]
cxlflash: Enable device id for future IBM CXL adapter
[ Upstream commit
a2746fb16e41b7c8f02aa4d2605ecce97abbebbd ]
This drop enables a future card with a device id of 0x0600 to be
recognized by the cxlflash driver.
As per the design, the Accelerator Function Unit (AFU) for this new IBM
CXL Flash Adapter retains the same host interface as the previous
generation. For the early prototypes of the new card, the driver with
this change behaves exactly as the driver prior to this behaved with the
earlier generation card. Therefore, no card specific programming has
been added. These card specific changes can be staged in later if
needed.
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj Kumar [Mon, 14 Dec 2015 21:07:23 +0000 (15:07 -0600)]
cxlflash: Resolve oops in wait_port_offline
[ Upstream commit
b45cdbaf9f7f0486847c52f60747fb108724652a ]
If an async error interrupt is generated, and the error requires the FC
link to be reset, it cannot be performed in the interrupt context. So a
work element is scheduled to complete the link reset in a process
context. If either an EEH event or an escalation occurs in between when
the interrupt is generated and the scheduled work is started, the MMIO
space may no longer be available. This will cause an oops in the worker
thread.
[ 606.806583] NIP kthread_data+0x28/0x40
[ 606.806633] LR wq_worker_sleeping+0x30/0x100
[ 606.806694] Call Trace:
[ 606.806721] 0x50 (unreliable)
[ 606.806796] wq_worker_sleeping+0x30/0x100
[ 606.806884] __schedule+0x69c/0x8a0
[ 606.806959] schedule+0x44/0xc0
[ 606.807034] do_exit+0x770/0xb90
[ 606.807109] die+0x300/0x460
[ 606.807185] bad_page_fault+0xd8/0x150
[ 606.807259] handle_page_fault+0x2c/0x30
[ 606.807338] wait_port_offline.constprop.12+0x60/0x130 [cxlflash]
To prevent the problem space area from being unmapped, when there is
pending work, a mapcount (using the kref mechanism) is held. The
mapcount is released only when the work is completed. The last
reference release is tied to the unmapping service.
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manoj Kumar [Mon, 14 Dec 2015 21:07:02 +0000 (15:07 -0600)]
cxlflash: Fix to resolve cmd leak after host reset
[ Upstream commit
ee91e332a6e6e9b939f60f6e1bd72fb2def5290d ]
After a few iterations of resetting the card, either during EEH
recovery, or a host_reset the following is seen in the logs. cxlflash
0008:00: cxlflash_queuecommand: could not get a free command
At every reset of the card, the commands that are outstanding are being
leaked. No effort is being made to reap these commands. A few more
resets later, the above error message floods the logs and the card is
rendered totally unusable as no free commands are available.
Iterated through the 'cmd' queue and printed out the 'free' counter and
found that on each reset certain commands were in-use and stayed in-use
through subsequent resets.
To resolve this issue, when the card is reset, reap all the commands
that are active/outstanding.
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaibhav Jain [Tue, 24 Nov 2015 10:56:18 +0000 (16:26 +0530)]
cxl: Fix DSI misses when the context owning task exits
[ Upstream commit
7b8ad495d59280b634a7b546f4cdf58cf4d65f61 ]
Presently when a user-space process issues CXL_IOCTL_START_WORK ioctl we
store the pid of the current task_struct and use it to get pointer to
the mm_struct of the process, while processing page or segment faults
from the capi card. However this causes issues when the thread that had
originally issued the start-work ioctl exits in which case the stored
pid is no more valid and the cxl driver is unable to handle faults as
the mm_struct corresponding to process is no more accessible.
This patch fixes this issue by using the mm_struct of the next alive
task in the thread group. This is done by iterating over all the tasks
in the thread group starting from thread group leader and calling
get_task_mm on each one of them. When a valid mm_struct is obtained the
pid of the associated task is stored in the context replacing the
exiting one for handling future faults.
The patch introduces a new function named get_mem_context that checks if
the current task pointed to by ctx->pid is dead? If yes it performs the
steps described above. Also a new variable cxl_context.glpid is
introduced which stores the pid of the thread group leader associated
with the context owning task.
Reported-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reported-by: Frank Haverkamp <HAVERKAM@de.ibm.com>
Suggested-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaibhav Jain [Mon, 16 Nov 2015 04:03:45 +0000 (09:33 +0530)]
cxl: Fix possible idr warning when contexts are released
[ Upstream commit
1b5df59e50874b9034c0fa389cd52b65f1f93292 ]
An idr warning is reported when a context is release after the capi card
is unbound from the cxl driver via sysfs. Below are the steps to
reproduce:
1. Create multiple afu contexts in an user-space application using libcxl.
2. Unbind capi card from cxl using command of form
echo <capi-card-pci-addr> > /sys/bus/pci/drivers/cxl-pci/unbind
3. Exit/kill the application owning afu contexts.
After above steps a warning message is usually seen in the kernel logs
of the form "idr_remove called for id=<context-id> which is not
allocated."
This is caused by the function cxl_release_afu which destroys the
contexts_idr table. So when a context is release no entry for context pe
is found in the contexts_idr table and idr code prints this warning.
This patch fixes this issue by increasing & decreasing the ref-count on
the afu device when a context is initialized or when its freed
respectively. This prevents the afu from being released until all the
afu contexts have been released. The patch introduces two new functions
namely cxl_afu_get/put that manage the ref-count on the afu device.
Also the patch removes code inside cxl_dev_context_init that increases ref
on the afu device as its guaranteed to be alive during this function.
Reported-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Tue, 15 Dec 2015 00:01:49 +0000 (16:01 -0800)]
Drivers: hv: vmbus: fix rescind-offer handling for device without a driver
[ Upstream commit
34c6801e3310ad286c7bb42bc88d42926b8f99bf ]
In the path vmbus_onoffer_rescind() -> vmbus_device_unregister() ->
device_unregister() -> ... -> __device_release_driver(), we can see for a
device without a driver loaded: dev->driver is NULL, so
dev->bus->remove(dev), namely vmbus_remove(), isn't invoked.
As a result, vmbus_remove() -> hv_process_channel_removal() isn't invoked
and some cleanups(like sending a CHANNELMSG_RELID_RELEASED message to the
host) aren't done.
We can demo the issue this way:
1. rmmod hv_utils;
2. disable the Heartbeat Integration Service in Hyper-V Manager and lsvmbus
shows the device disappears.
3. re-enable the Heartbeat in Hyper-V Manager and modprobe hv_utils, but
lsvmbus shows the device can't appear again.
This is because, the host thinks the VM hasn't released the relid, so can't
re-offer the device to the VM.
We can fix the issue by moving hv_process_channel_removal()
from vmbus_close_internal() to vmbus_device_release(), since the latter is
always invoked on device_unregister(), whether or not the dev has a driver
loaded.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Tue, 15 Dec 2015 00:01:47 +0000 (16:01 -0800)]
Drivers: hv: vmbus: serialize process_chn_event() and vmbus_close_internal()
[ Upstream commit
63d55b2aeb5e4faa170316fee73c3c47ea9268c7 ]
process_chn_event(), running in the tasklet, can race with
vmbus_close_internal() in the case of SMP guest, e.g., when the former is
accessing channel->inbound.ring_buffer, the latter could be freeing the
ring_buffer pages.
To resolve the race, we can serialize them by disabling the tasklet when
the latter is running here.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olaf Hering [Tue, 15 Dec 2015 00:01:42 +0000 (16:01 -0800)]
Drivers: hv: vss: run only on supported host versions
[ Upstream commit
ed9ba608e4851144af8c7061cbb19f751c73e998 ]
The Backup integration service on WS2012 has appearently trouble to
negotiate with a guest which does not support the provided util version.
Currently the VSS driver supports only version 5/0. A WS2012 offers only
version 1/x and 3/x, and vmbus_prep_negotiate_resp correctly returns an
empty icframe_vercnt/icmsg_vercnt. But the host ignores that and
continues to send ICMSGTYPE_NEGOTIATE messages. The result are weird
errors during boot and general misbehaviour.
Check the Windows version to work around the host bug, skip hv_vss_init
on WS2012 and older.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Smetanin [Tue, 15 Dec 2015 00:01:38 +0000 (16:01 -0800)]
drivers/hv: cleanup synic msrs if vmbus connect failed
[ Upstream commit
17efbee8ba02ef00d3b270998978f8a1a90f1d92 ]
Before vmbus_connect() synic is setup per vcpu - this means
hypervisor receives writes at synic msr's and probably allocate
hypervisor resources per synic setup.
If vmbus_connect() failed for some reason it's neccessary to cleanup
synic setup by call hv_synic_cleanup() at each vcpu to get a chance
to free allocated resources by hypervisor per synic.
This patch does appropriate cleanup in case of vmbus_connect() failure.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olaf Hering [Tue, 15 Dec 2015 00:01:36 +0000 (16:01 -0800)]
Drivers: hv: util: catch allocation errors
[ Upstream commit
cdc0c0c94e4e6dfa371d497a3130f83349b6ead6 ]
Catch allocation errors in hvutil_transport_send.
Fixes: 14b50f80c32d ('Drivers: hv: util: introduce hv_utils_transport abstraction')
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olaf Hering [Tue, 15 Dec 2015 00:01:34 +0000 (16:01 -0800)]
tools: hv: report ENOSPC errors in hv_fcopy_daemon
[ Upstream commit
b4ed5d1682c6613988c2eb1de55df5ac9988afcc ]
Currently some "Unspecified error 0x80004005" is reported on the Windows
side if something fails. Handle the ENOSPC case and return
ERROR_DISK_FULL, which allows at least Copy-VMFile to report a meaning
full error.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / firefly-linux-kernel-4.4.55.git / log