staging: vt6656: vnt_rx_data add track rsr and new_rsr errors

Add rsr and new_rsr error packet error drop.

if NEWRSR_DECRYPTOK fails drop packet altogether.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: vnt_tx_packet don't change power when off channel.

The changing channel is so fast when off channel that changing power is pointless.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: vnt_rf_setpower rate <= RATE_11M check array bound

decrement channel by one and check array bound.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: vnt_rf_set_txpower use power for priv->byCurPwr

The byCurPwr value can change state while in another thread,.

Change to local variable power which is the last set value.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: turn radio off after mac registered.

Turn the radio off to save power is the device is unused
on system.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_nsBulkOutIoCompleteWrite fix bug of 5GHZ a rates idx

On 2GHz band the values of wCurrentRate match the idx rates.

However, on 5GHz they do not because in channel.c vnt_rates_a do not
match idx.

Instead use the info->control.rates[0].idx the value that was tried.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: implement get_stats ieee80211_low_level_stats

The driver already report low_level_stats via vnt_interrupt_data.

Allow mac80211 to collect them via vnt_get_stats

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: Add void declarations in zero-arg functions.

Added explicit void declarations to zero-argument function headers.
The following coccinelle script was used:
@addvoid@
identifier f;
@@

f(
+ void
 ) { ... }

Signed-off-by: Chi Pham <fempsci@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: remove typedef for CIRCBLK

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename FreeCircBlock()

rename camel case function FreeCircBlock() to ced_free_circ_block()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename GetCircBlock()

rename camel case function GetCircBlock() to ced_get_circ_block()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SetCircular()

rename camel case function SetCircular() to ced_set_circular()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgStopLoop()

rename camel case function DbgStopLoop() to ced_dbg_stop_loop()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgGetData()

rename camel case function DbgGetData() to ced_dbg_get_data()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgRampAddr()

rename camel case function DbgRampAddr() to ced_dbg_ramp_addr()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgRampData()

rename camel case function DbgRampData() to ced_dbg_ramp_data()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgPoke()

rename camel case function DbgPoke() to ced_dbg_poke()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgPeek()

rename camel case function DbgPeek() to ced_dbg_peek()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename DbgCmd1401()

rename camel case function DbgCmd1401() to ced_dbg_cmd()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename TransferFlags()

rename camel case function TransferFlags() to ced_transfer_flags()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename TypeOf1401()

rename camel case function TypeOf1401() to ced_type_of_1401()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename CheckSelfTest()

rename camel case function CheckSelfTest() to ced_check_self_test()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename StartSelfTest()

rename camel case function StartSelfTest() to ced_start_self_test()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename StateOf1401()

rename camel case function StateOf1401() to ced_state_of_1401()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: remove unused func BlkTransState

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename KillIO1401()

rename camel case function KillIO1401() to ced_kill_io()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename GetTransfer()

rename camel case function GetTransfer() to ced_get_transfer()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename TestEvent()

rename camel case function TestEvent() to ced_test_event()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename WaitEvent()

rename camel case function WaitEvent() to ced_wait_event()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SetEvent()

rename camel case function SetEvent() to ced_set_event()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename UnsetTransfer()

rename camel case function UnsetTransfer() to ced_unset_transfer()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SetTransfer()

rename camel case function SetTransfer() to ced_set_transfer()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SetArea()

rename camel case function SetArea() to ced_set_area()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ClearArea()

rename camel case function ClearArea() to ced_clear_area()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename GetOutBufSpace()

rename camel case function GetOutBufSpace() to ced_get_out_buf_space()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename LineCount()

rename camel case function LineCount() to ced_line_count()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename Stat1401()

rename camel case function Stat1401() to ced_stat_1401()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename GetString()

rename camel case function GetString() to ced_get_string()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename Reset1401()

rename camel case function Reset1401() to ced_reset()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename QuickCheck()

rename camel case function QuickCheck() to ced_quick_check() and make it
static

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: make ced_is_1401() static

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename Is1401()

rename camel case function Is1401() to ced_is_1401()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename InSelfTest()

rename camel case function InSelfTest() to ced_in_self_test()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ReadWrite_Cancel()

rename camel case function ReadWrite_Cancel() to ced_read_write_cancel()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename Get1401State()

rename camel case function Get1401State() to ced_get_state()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SendChar()

rename camel case function SendChar() to ced_send_char()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SendString()

rename camel case function SendString() to ced_send_string()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename PutChars()

rename camel case function PutChars() to ced_put_chars()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename FlushInBuff()

rename camel case function FlushInBuff() to ced_flush_in_buff()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename FlushOutBuff()

rename camel case function FlushOutBuff() to ced_flush_out_buff()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename Allowi()

rename camel case function Allowi() to ced_allowi()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename Handle1401Esc()

rename camel case function Handle1401Esc() to ced_handle_esc()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ReadDMAInfo()

rename camel case function ReadDMAInfo() to ced_read_dma_info()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ReadHuff()

rename camel case function ReadHuff() to ced_read_huff()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ReadWord()

rename camel case function ReadWord() to ced_read_word()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ReadChar()

rename camel case function ReadChar() to ced_read_char()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename ReadWriteMem()

rename camel case function ReadWriteMem() to ced_read_write_mem()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename StageChunk()

rename camel case function StageChunk() to ced_stage_chunk()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename CopyUserSpace()

rename camel case function CopyUserSpace() to ced_copy_user_space()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename SendChars()

rename camel case function SendChars() to ced_send_chars()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: rename CanAcceptIoRequests()

rename camel case function CanAcceptIoRequests() to can_accept_io_requests()

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unnecessary null test before kfree

Fix checkpatch warning:
WARNING: kfree(NULL) is safe this check is probably not required

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Simplify _BlockWrite() based on saner rtl8723au_writeN()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Sanitize USB read/write functions

The original Realtek provided functions suffered badly from clutter to
accommodate broken operating systems. Lets try this lean and clean
version instead.

v2: Do not use the stack for data passed to usb_control_msg(). This
    requires reintroducing the mutex used in the old function. In
    addition, get rid of the no longer used 'usb_vendor_req_buf'.
    Note that rtl8723au_writeN() remains unlocked, so it can be used
    for bulk block transfers without having to retake the mutex for
    every write().

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove never set struct rtw_adapter->bNotifyChannelChange

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: pwrctrl_priv->ps_flag is never set

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: pnp_bstop_trx is never set

In addition remove unused pnp_current_pwr_state

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused variables from struct pwrctrl_priv

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused pwrctrl_priv->brfoffbyhw

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fold power_saving_wk_hdl() into rtw_drvextra_cmd_hdl23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Clean up rtw_pm_set_ips23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: logger: fixed checkpatch.pl warnings.

Signed-off-by: Jerry Stralko <gerb.stralko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: android: ion: Kconfig: Let it also depend on HAS_DMA

ION need HAS_DMA (e.g. need DMA_SHARED_BUFFER), so it has to depend on
HAS_DMA, or can not pass compiling with allmodconfig under score which
NO_DMA.  And the related error:

    CC      drivers/staging/android/ion/ion_cma_heap.o
  drivers/staging/android/ion/ion_cma_heap.c: In function 'ion_cma_mmap':
  drivers/staging/android/ion/ion_cma_heap.c:168:2: error: implicit declaration of function 'dma_mmap_coherent' [-Werror=implicit-function-declaration]
    return dma_mmap_coherent(dev, vma, info->cpu_addr, info->handle,
    ^
  cc1: some warnings being treated as errors
  make[4]: *** [drivers/staging/android/ion/ion_cma_heap.o] Error 1
  make[3]: *** [drivers/staging/android/ion] Error 2
  make[2]: *** [drivers/staging/android] Error 2
  make[1]: *** [drivers/staging] Error 2
  make: *** [drivers] Error 2

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: binder.c: binder_ioctl() cleanup

binder_ioctl() is quite huge and checkpatch dirty - mostly because of
the amount of code for the BINDER_WRITE_READ and BINDER_SET_CONTEXT_MGR.
Moved that code into the new binder_ioctl_write_read() and
binder_ioctl_set_ctx_mgr()

Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: binder: add vm_fault handler

An issue was observed when a userspace task exits.
The page which hits error here is the zero page.
In binder mmap, the whole of vma is not mapped.
On a task crash, when debuggerd reads the binder regions,
the unmapped areas fall to do_anonymous_page in handle_pte_fault,
due to the absence of a vm_fault handler. This results in
zero page being mapped. Later in zap_pte_range, vm_normal_page
returns zero page in the case of VM_MIXEDMAP and it results in the
error.

BUG: Bad page map in process mediaserver  pte:9dff379f pmd:9bfbd831
page:c0ed8e60 count:1 mapcount:-1 mapping:  (null) index:0x0
page flags: 0x404(referenced|reserved)
addr:40c3f000 vm_flags:10220051 anon_vma:  (null) mapping:d9fe0764 index:fd
vma->vm_ops->fault:   (null)
vma->vm_file->f_op->mmap: binder_mmap+0x0/0x274
CPU: 0 PID: 1463 Comm: mediaserver Tainted: G        W    3.10.17+ #1
[<c001549c>] (unwind_backtrace+0x0/0x11c) from [<c001200c>] (show_stack+0x10/0x14)
[<c001200c>] (show_stack+0x10/0x14) from [<c0103d78>] (print_bad_pte+0x158/0x190)
[<c0103d78>] (print_bad_pte+0x158/0x190) from [<c01055f0>] (unmap_single_vma+0x2e4/0x598)
[<c01055f0>] (unmap_single_vma+0x2e4/0x598) from [<c010618c>] (unmap_vmas+0x34/0x50)
[<c010618c>] (unmap_vmas+0x34/0x50) from [<c010a9e4>] (exit_mmap+0xc8/0x1e8)
[<c010a9e4>] (exit_mmap+0xc8/0x1e8) from [<c00520f0>] (mmput+0x54/0xd0)
[<c00520f0>] (mmput+0x54/0xd0) from [<c005972c>] (do_exit+0x360/0x990)
[<c005972c>] (do_exit+0x360/0x990) from [<c0059ef0>] (do_group_exit+0x84/0xc0)
[<c0059ef0>] (do_group_exit+0x84/0xc0) from [<c0066de0>] (get_signal_to_deliver+0x4d4/0x548)
[<c0066de0>] (get_signal_to_deliver+0x4d4/0x548) from [<c0011500>] (do_signal+0xa8/0x3b8)

Add a vm_fault handler which returns VM_FAULT_SIGBUS, and prevents the
wrong fallback to do_anonymous_page.

Signed-off-by: Vinayak Menon <vinayakm.list@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove all proc entries from virtpci

This patch removes all proc entries from virtpci

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: Fix noderef sparse warnings in vbusdeviceinfo.h

vbuschannel_devinfo_to_string() was declared with the devinfo argument
as a pointer to __iomem space.  No callers of this function need the
__iomem space, so I removed that constraint.

Same thing goes for vbuschannel_sanitize_buffer().  It doesn't need to
operate on I/O space.

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: Remove ultra_vbus_init_channel function

The function ultra_vbus_init_channel() is never called since
previous server code was removed.  Remove the dead code.

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: Remove isServer arg from init_vbus_channel()

The init_vbus_channel() function is never called with the isServer
argument equal to TRUE, so just get rid of the argument altogether.
This also means that the code in the function that would be executed
in the server case can be removed since it is never executed.

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: use Linux coding convention for function names

Change function names to conform to Linux kernel coding convention.
    ULTRA_VBUS_init_channel() --> ultra_vbus_init_channel()
    VBUSCHANNEL_devInfoToStringBuffer() --> vbuschannel_devinfo_to_string()
    VBUSCHANNEL_sanitize_buffer() --> vbuschannel_sanitize_buffer()
    VBUSCHANNEL_itoa() --> vbuschannel_itoa()

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:unisys: Add Kconfig dependency on UNISYS_VISORUTIL to UNISYS_CHANNELSTUB

The visorchannelstub module references the variable unisys_spar_platform
which is declared in the visorutil module.  Add the proper dependency to
Kconfig to ensure that visorutil is enabled when building visorchannelstub.

This address the build error:
   drivers/built-in.o: In function `channel_mod_init':
   chanstub.c:(.init.text+0xbe24): undefined reference to `unisys_spar_platform'

Reported by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'component-for-staging' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into staging-next

Russell writes:

This updates imx-drm for the recently merged updates to the component
helper, and as such is based upon the previously pulled updates
(including the recent fix) into the the driver tree.

Merge 3.16-rc4 into staging-next

We want the staging tree fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.16-rc4

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

Pull devicetree bugfix from Grant Likely:
 "Important bug fix for parsing 64-bit addresses on 32-bit platforms.
  Without this patch the kernel will try to use memory ranges that
  cannot be reached"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  of: Check for phys_addr_t overflows in early_init_dt_add_memory_arch

Merge tag 'scsi-for-linus' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of 13 fixes, a MAINTAINERS update and a sparse update.
  The fixes are mostly correct value initialisations, avoiding NULL
  derefs and some uninitialised pointer avoidance.

  All the patches have been incubated in -next for a few days.  The
  final patch (use the scsi data buffer length to extract transfer size)
  has been rebased to add a cc to stable, but only the commit message
  has changed"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] use the scsi data buffer length to extract transfer size
  virtio-scsi: fix various bad behavior on aborted requests
  virtio-scsi: avoid cancelling uninitialized work items
  ibmvscsi: Add memory barriers for send / receive
  ibmvscsi: Abort init sequence during error recovery
  qla2xxx: Fix sparse warning in qla_target.c.
  bnx2fc: Improve stats update mechanism
  bnx2fc: do not scan uninitialized lists in case of error.
  fc: ensure scan_work isn't active when freeing fc_rport
  pm8001: Fix potential null pointer dereference and memory leak.
  MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs
  be2iscsi: remove potential junk pointer free
  be2iscsi: add an missing goto in error path
  scsi_error: set DID_TIME_OUT correctly
  scsi_error: fix invalid setting of host byte

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "i915, tda998x and vmwgfx fixes,

  The main one is i915 fix for missing VGA connectors, along with some
  fixes for the tda998x from Russell fixing some modesetting problems.

  (still on holidays, but got a spare moment to find these)"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix incorrect write to read-only register v2:
  drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin
  drm/i915: only apply crt_present check on VLV
  drm/i915: Wait for vblank after enabling the primary plane on BDW
  drm/i2c: tda998x: add some basic mode validation
  drm/i2c: tda998x: faster polling for edid
  drm/i2c: tda998x: move drm_i2c_encoder_destroy call

Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This week's arm-soc fixes:

   - A set of of OMAP patches that we had missed Tony's pull request of:
     * Reset fix for am43xx
     * Proper OPP table for omap5
     * Fix for SoC detection of one of the DRA7 SoCs
     * hwmod updates to get SATA and OCP to work on omap5 (drivers
       merged in 3.16)
     * ... plus a handful of smaller fixes
   - sunxi needed to re-add machine specific restart code that was
     removed in anticipation of a watchdog driver being merged for 3.16,
     and it didn't make it in.
   - Marvell fixes for PCIe on SMP and a big-endian fix.
   - A trivial defconfig update to make my capri test board boot with
     bcm_defconfig again.

  ... and a couple of MAINTAINERS updates, one to claim new Keystone
  drivers that have been merged, and one to merge MXS and i.MX (both
  Freescale platforms).

  The largest diffs come from the hwmod code for omap5 and the re-add of
  the restart code on sunxi.  The hwmod stuff is quite late at this
  point but it slipped through cracks repeatedly while coming up the
  maintainer chain and only affects the one SoC so risk is low"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add few more Keystone drivers
  MAINTAINERS: merge MXS entry into IMX one
  ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs
  ARM: mvebu: fix cpuidle implementation to work on big-endian systems
  ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup
  ARM: mvebu: move Armada 375 external abort logic as a quirk
  ARM: bcm: Fix bcm and multi_v7 defconfigs
  ARM: dts: dra7-evm: remove interrupt binding
  ARM: OMAP2+: Fix parser-bug in platform muxing code
  ARM: DTS: dra7/dra7xx-clocks: ATL related changes
  ARM: OMAP2+: drop unused function
  ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm
  ARM: dts: omap5: Update CPU OPP table as per final production Manual
  ARM: DRA722: add detection of SoC information
  ARM: dts: Enable twl4030 off-idle configuration for selected omaps
  ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
  ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A few minor fixlets in ARM SoC irq drivers and a fix for a memory leak
  which I introduced in the last round of cleanups :("

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix memory leak when calling irq_free_hwirqs()
  irqchip: spear_shirq: Fix interrupt offset
  irqchip: brcmstb-l2: Level-2 interrupts are edge sensitive
  irqchip: armada-370-xp: Mask all interrupts during initialization.

Merge tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel

Fixes for 3.16-rc3; most importantly Jesse brings back VGA he took away
on a bunch of machines. Also a vblank fix for BDW and a power workaround
fix for VLV.

* tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin
  drm/i915: only apply crt_present check on VLV
  drm/i915: Wait for vblank after enabling the primary plane on BDW

Merge branch 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linux

fix to a 3.15 commit.

* 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix incorrect write to read-only register v2:

Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox

mode fixes for tda998x.

* 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  drm/i2c: tda998x: add some basic mode validation
  drm/i2c: tda998x: faster polling for edid
  drm/i2c: tda998x: move drm_i2c_encoder_destroy call

genirq: Fix memory leak when calling irq_free_hwirqs()

irq_free_hwirqs() always calls irq_free_descs() with a cnt == 0
which makes it a no-op since the interrupt count to free is
decremented in itself.

Fixes: 7b6ef1262549f6afc5c881aaef80beb8fd15f908
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1404167084-8070-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull ARM64 fixes from Catalin Marinas:
 - Exception level check at boot time (for completeness, not triggering
   any bug before)
 - I/D-cache synchronisation logic for huge pages
 - Config symbol typo

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix el2_setup check of CurrentEL
  arm64: mm: Make icache synchronisation logic huge page aware
  arm64: mm: Fix horrendous config typo

MAINTAINERS: Add few more Keystone drivers

Update MAINTAINERS file for recently added reset controller, AEMIF
and clocksource driver for Keystone SOCs.

The EMIF memory controller driver is also added along with AEMIF.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

MAINTAINERS: merge MXS entry into IMX one

The mach-mxs platform is actually co-maintained by myself and
pengutronix folks.  Also it's hosted in the same kernel tree as IMX.
So let's merge the entry into IMX one.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for v3.16 (round #2)

 - mvebu
    - Fix PCIe deadlock now that SMP is enabled
    - Fix cpuidle for big-endian systems

* tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: fix cpuidle implementation to work on big-endian systems
  ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup
  ARM: mvebu: move Armada 375 external abort logic as a quirk

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs

This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from
the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for
the sun4i, sun5i and sun7i families.

This is needed because the watchdog counterpart of these commits was dropped,
and didn't make it into 3.16. In order to still be able to reboot the board, we
need to reintroduce that code. Of course, the long term view is still to get
rid of that code in mach-sunxi.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.16/fixes-against-rc1' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Merge OMAP fixes from Tony Lindgren:

Fixes for omaps for issues discovered during the merge window and
enabling of a few features that had to wait for the driver
dependencies to clear.

The fixes included are:

- Fix am43xx hard reset flags
- Fix SoC detection for DRA722
- Fix CPU OPP table for omap5
- Fix legacy mux parser bug if requested muxname is a prefix of
  multiple mux entries
- Fix qspi interrupt binding that relies on the irq crossbar
  that has not yet been enabled
- Add missing phy_sel for am43x-epos-evm
- Drop unused gic_init_irq() that is no longer needed

And the enabling of features that had driver dependencies are:

- Change dra7 to use Audio Tracking Logic clock instead of a fixed
  clock now that the clock driver for it has been merged

- Enable off idle configuration for selected omaps as all the kernel
  dependencies for device tree based booting are finally merged as
  this is needed to get the automated PM tests working finally with
  device tree based booting

- Add hwmod entry for ocp2scp3 for omap5 to get sata working as
  all the driver dependencies are now in the kernel and this patch
  fell through the cracks during the merge window

* tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra7-evm: remove interrupt binding
  ARM: OMAP2+: Fix parser-bug in platform muxing code
  ARM: DTS: dra7/dra7xx-clocks: ATL related changes
  ARM: OMAP2+: drop unused function
  ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm
  ARM: dts: omap5: Update CPU OPP table as per final production Manual
  ARM: DRA722: add detection of SoC information
  ARM: dts: Enable twl4030 off-idle configuration for selected omaps
  ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
  ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX

imx-drm: update to use component match support

Update the imx-drm driver to use the component match support rather than
add_components.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>