V4L/DVB (9586): Fix possible null pointer dereference in info message

Fix case where we could end up dereferencing a NULL pointer if dev->vdev or
dev->vbi_dev were not set properly.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9585): Skip reading eeprom in newer Empia devices

Empia switched to a 16-bit addressable eeprom in newer devices.  While we
could certainly write a routine to read the eeprom, there is nothing of use
in there that cannot be accessed through registers, and there is the risk that
we could corrupt the eeprom (since a 16-bit read call is interpreted as a
write call by 8-bit eeproms).  So just be safe and bail out of the function.

Thanks for Ray Lu from Empia for providing the em2874 datasheet.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9584): Support different GPIO/GPO registers for newer devices

Empia moved the location of the GPIO/GPO registers in newer devices.  Add the
ability to specify the relocated registers (including caching of register
contents).

Thanks for Ray Lu from Empia for providing the em2874 datasheet.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9583): Remember chip id of devices at initialization

When setting up the device, remember the chip id, so we can control behavior
in the future without having to read the register continuously.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9582): Add a EM28XX_NODECODER option to the list of available decoders

Add a EM28XX_NODECODER option to the list of available decoders.  This option
becomes important for devices that do not have analog support.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9581): Remove unused variable from em28xx-audio.c

Remove unused variable from em28xx-audio.c

Fix warning for unused "ret" variable

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9580): Add chip id for em2874 to list of known chips

Add em2874 chip id

Add chip id for em2874 to list of known chips

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9579): v4l core: a few get ioctls were lacking memory clean

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9578): v4l core: add support for enumerating frame sizes and intervals

video_ioctl2 lacks implementation of those two ioctls:
- VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS

Adds implementation for those.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9577): saa7134-dvb: MFE attachment clean-up for saa-7134 dvb

This cleans-up MFE attachment for saa-7134 dvb
devices.

note: MFE is not fully implemented here yet.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9576): cx88-dvb: MFE attachment clean-up for HVR-3000/4000

This cleans-up MFE attachment for these cards plus
two cases of potential memory leak on attachment
failure.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9572a): Whitespace cleanup

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9570): uvcvideo: Handle failed video GET_{MIN|MAX|DEF} requests more gracefully

Failed requests will now generate a one-time warning message instead of the
usual "Failed to query..." error, which should be more user-friendly. The
driver will also recover automatically from failed GET_MIN/GET_MAX requests
when the device is half-broken without requiring the MINMAX quirk (fully
broken devices still need the quirk).

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9563): gspca: Let gspca handle the webcam 0471:0328 instead of sn9c102.

According to http://bugzilla.kernel.org/show_bug.cgi?id=11997,
the driver sn9c102 does not work for this webcam.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9560): gspca: Let gspca handle the webcam 0c45:602c instead of sn9c102.

According to http://bugzilla.kernel.org/show_bug.cgi?id=11920,
the driver sn9c102 does not work for this webcam.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9548): gspca: Fix Kconfig CodingStyle

Signed-off-by: Frederic Cand <frederic.cand@anevia.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9540): dsbr100: add disabled controls and fix version

Patch adds disabled controls in
v4l2_queryctrl struct. Also version of driver corrected.

--

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9539): dsbr100: add suspend and resume

This patch adds support for suspend and resume methods in driver.
Without this kradio and gnomeradio crashes during resume.
Also .supports_autosuspend in usb_driver struct set equal to 0 to avoid
suspending of module if usb_autosuspend enabled.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9572): Whitespace cleanup

Some recent patches added a few bad whitespaces. Remove that.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9569): uvcvideo: Sort the frame descriptors during parsing

The UVC specification does not require frame descriptors to be sorted by
bFrameIndex. At least one camera (145f:013e) is known not to sort the
descriptors properly, so they need to be sorted during parsing as the driver
then accesses them by index.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9568): uvcvideo: Add support for Lenovo Thinkpad SL500 integrated webcam

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9567): uvcvideo: Add support for Samsung Q310 integrated webcam

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9565): gspca: Remove empty lines in traces.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9562): gspca: Set the default frame rate to 30 fps for sensor ov764x in ov519.

This patch fixes the bad picture at low resolution (320x240).

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9561): gspca: Cleanup the source of ov519.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9553): gspca: Webcam 145f:013a added in pac207.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9552): gspca: Simplify the ISOC packet scanning in tv8532.

This patch
- makes unuseful the temporary buffers
- and also fixes the bad colors problem.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9548): gspca: Properly indent Kconfig

Signed-off-by: Frederic Cand <frederic.cand@anevia.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9547): gspca: Version change.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9546): gspca: Bad scanning of ISOC packets in tv8532.

- The scan function must know about empty packets.
- Packets starting with 0x80 must not be counted.
- Wrong size of the translated frame.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9545): gspca: Add a flag for empty ISOC packets.

- This flag is needed by some subdrivers as tv8532 for start
  of frame detection.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9544): gspca: Clear the bulk endpoint at starting time when bulk transfer.

- usb_clear_halt() added in gspca and removed in finepix.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9543): gspca: Adjust autoexpo values for cams with a vga sensor in sonixb.

- This patch makes sonixb.c strife to different values during autoexposure
  for sif versus vga sensors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9541): gspca: Add infrared control for sonixj - mi0360.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9537): Add TerraTec Cinergy S USB support

Add TerraTec Cinergy S USB support

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Acked-by: Thorsten Leupold <th86@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9536): WinFast DTV2000 H: add support for missing analog inputs

Add support for the following inputs:
 - radio tuner
 - composite 1 & 2 (only 1 is physically available, but composite 2 is also
   advertised by windows driver)
 - svideo

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9535): cx88-dvb: Remove usage core->prev_set_voltage from cx24116 based cards.

Remove usage core->prev_set_voltage from cx24116 based cards,
as it does not make sense for the demod.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9534): cx88: Add support for Prof 6200 DVB-S PCI card

The card based on stv0299 or stv0288 demodulators.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card

The card based on stv0299 or stv0288 demodulators.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9532): Properly handle error messages during alsa registering

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9520): stb0899 Remove double .read_status assignment

Currently in stb0899 code  it appears double .read_status assignment
Send patch to fix it.

Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9514): cx18: Fix PLL freq computation for debug display

cx18: Fix PLL freq computation for debug display.
The code to compute the PLL freq from register values was storing an
intermediate 56 bit result in a 32 bit type, causing a nonsense value to
be displayed.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9530): Add new pixel format VYUY 16 bits wide.

There were already 3 YUV formats defined :
 - YUYV
 - YVYU
 - UYVY
The only left combination is VYUY, which is added in this
patch.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9529): cx88: add a second PCI ID for ATI TV Wonder Pro

There's a second PCI identifier for the ATI TV WONDER PRO card
(0x1002:0x00f9).

Attached is a patch to kernel 2.6.27 that adds autodetection for this
version.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9526): af9015: add support for KWorld USB DVB-T TV Stick II (VS-DVBT 395U)

- add USB-ID 1b80:e396 for KWorld USB DVB-T TV Stick II (VS-DVBT 395U)

Thanks-to: Bo Hansen <bohans@online.no>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9525): af9015: add support for AverMedia Volar X remote.

This patch add support for AverMedia Volar X remote.

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9523): Increase number of BT8XX devices supported in a system

The BT8XX device driver currently only supports 16 such devices in a
system. This is too small for many surveillance applications. This
patch increases the number to 32.

Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9522): Increase number of SAA7134 devices supported in a system

The SAA7134 device driver currently only supports 8 such devices in a
system. This is too small for many surveillance applications. This
patch increases the number to 32.

Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name()

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Thanks,
Kay

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: remove unused #include <version.h>

The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/media/dvb/frontends/si21xx.c

This patch removes the said #include <version.h>.

Cc: Igor M. Liplianin <liplianin@tut.by>
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9518): radio-mr800: remove warn, info and err messages

Patch removes warn(), err() and info() statements in
drivers/media/radio/radio-mr800.c, and place dev_warn, dev_info in right
places.
Printk changed on pr_info and pr_err macro. Also new macro
amradio_dev_warn defined. Name in usb driver struct changed on
MR800_DRIVER_NAME.

--

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9512): cx18: Fix write retries for registers that always change - part 3.

cx18: Fix write retries for registers that always change - part 3.
Fix the io for the rest of the registers that will often not read back the
value just written.  Modified register readback checks to make sure the
intended effect was achieved without constantly rewriting the registers.
The one outstanding register remaining is 0xc72014 CX18_AUDIO_ENABLE, whose
behavior on writes I have yet to determine.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9508): ivtv: enable tuner support for Yuan PG600-2

The Yuan PG600-2 has a working tuner, so this can be enabled.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9507): v4l: remove EXPERIMENTAL from several drivers

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9504): dvbdev: fix typo causing 2.6.28 compile error

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9503): v4l: remove inode argument from video_usercopy

The inode argument was never used. Removing it from video_usercopy
brings the function pointer type of video_usercopy in line with similar
v4l2 functions, thus simplifying several drivers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9502): ov772x: CodingStyle improvements

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9500): cx88-dvb: MFE attachment fix-up

MFE attachment fix-up

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9498): Simplify video standards enumeration

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9497): tda9887/cx88: Adds SECAM/BGH standards

Adds secam bgh support

Signed-off-by: Frederic CAND <frederic.cand@anevia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9491): rationalise addresses to one common one

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9490): linux-next: v4l-dvb tree build failure

Today's linux-next build (x86_64 allmodconfig) failed like this:
drivers/media/dvb/dvb-core/dvbdev.c: In function 'dvb_register_device':
drivers/media/dvb/dvb-core/dvbdev.c:254: error: implicit declaration of function 'nums2minor'

Caused by commit f3d9182030d9655d9ffff33dfceb45b4a127b6ec ("V4L/DVB
(9361): Dynamic DVB minor allocation") which clearly has not even been
built with CONFIG_DVB_DYNAMIC_MINORS=y.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9488): Add ov772x driver

This patch adds ov772x driver that use soc_camera framework.
It was tested on SH Migo-r board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9484): v4l: rename compat_ioctl32.c to v4l2-compat-ioctl32.c

All core v4l sources should start with 'v4l2-'
This file was the last one for which this was not the case.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9479): Wait for a maximum of 100mS

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9474): cx18: Remove redundant block scope variable in cx18_probe() for sparse

cx18: Remove redundant block scope variable in cx18_probe() to eliminate sparse
build warning.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9473): add DVB_DEVICE_NUM and DVB_ADAPTER_NUM to uevent

This allows udev to create proper device nodes without any
hacky shell scripts/programs to call, which guess these numbers
from the kernel device names.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9472): dm1105: fix the misuse of pci_dma_mapping_error

pci_dma_mapping_error can't be used for pci_alloc_consistent
(pci_dma_mapping_error is for dma_map_single and dma_map_page).
pci_alloc_consistent returns NULL if the allocation fails.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9470): Disable PLL Loop while tuning

Signed-off-by: Ales Jurik <ajurik@quick.cz>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9469): Port STB0899 and STB6100

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9468): Miscellaneous fixes

 - Fix a bitfield
 - Set gain appropriately
 - Slept for the wrong duration

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9467): Fix runtime verbosity

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9466): Bug: Fix incorrect Register definitions

Thanks to Robert Schlabbach <robert_s@gmx.net> for pointing this out

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9465): Fix incorrect IF_AGC Bitfield definition

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9464): Remove unreferenced delivery

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9463): Make delivery system standalone.

Eventhough the delivery system is made standalone, DVBFE_SET_DELSYS
needs to be set as the very first operation, for a multistandard frontend

Splitting delivery system out as a new ioctl, makes things a bit more
easier to understand.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9462): Allow specifying clock per device

Optimizations galore: Blistering barnacles! The KNC1 and friends
like 90 Mhz clock much better rather than running at a higher
throttle, for almost similar hardware. he exact cause unknown,
possibly due to a lower voltage applied for the demod power supply.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9461): Initialize SYSREG register

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9460): Code Simplification

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9459): We can now reduce the debug levels, just need to look at errors only.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9458): Bugfix: gate control needs to be handled

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9457): Optimization, Fix a Bug

* cut down some I/O operations by disabling "disable gate"
* budget_av was left with the gate open, thereby more susceptible
to RF interference due to I/O operations

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9456): Select STB0899, STB6100, TDA8261 for budget_ci and budget_av respectively.

Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing it out

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9455): Cleanup: remove some superfluous stuff and dead commented out code

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9454): Fix a compile warning

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9453): stb0899: fix compilation warnings

Cleanup/Optimization:
* Fix compile warnings
* The compile warnings helped to identify 2 unnecessary I/O operations

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9452): Fix invalid GCT mode

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9451): Bug! F/3 Clock domain was incorrectly used

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9450): Code Review: #4 Consolidate configurations

* Better readability
* Avoids duplication

Comments from Oliver Endriss <o.endriss@gmx.de>

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9449): Code Simplification: use do_div() instead

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9448): Bug: fix array size

Bug: a string which contains 4 digits needs an array
of size 5. The fifth character will hold the terminating '\0'

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9447): stb6100: improve rounding

Optimization: Round the requested value to achieve a
+/-1MHz error instead of +0/-2MHz

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9446): Bug Fix an overflow in bandwidth calculation

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9445): Bug: Bandwidth calculation at upper and lower boundaries

Signed-off-by: Reinhard Nissl <rnissl@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9444): Initialize post process events to NULL

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9443): Bug: Bandwidth calculation

Bug #1: The 5 tap equaliser is set to correct simple perturbations
like reflections on the IF cable for DVB-S. In the case of DVB-S2
a more powerful equalizer is used to correct the filter group delay
allowing the bandwidth to be reduced by a factor of 1/3

Bug #2: The ZIF tuner takes badwidth to be set in Hz

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9442): Revert back previous change to 90MHz

Note:
* At High Symbol Rates we do not have enouph machine cycles to handle the
  incoming symbols and hence might run into problems at the very end of the
  specified definition
* Most of the equations have been calculated for a master clock of 99 MHz,
  running at 90MHz, raises lot of issues such as the need to recalculate
  all of them , which is eventually very painful.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9441): Code simplification: clock is already initialized, no need to initialize again.

Thanks to Marko Schluessler <marco@lordzodiac.de> for pointing it out

Signed-off-by: Marko Schluessler <marco@lordzodiac.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9440): Bug in previous commit

Signed-off-by: Arvo Jarve <arvo@softshark.ee>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9439): Bug! SFRL nibble got swapped

The Bug was found by Arvo Jarve <arvo@softshark.ee>

It was a wonder how it worked in the case with this bug,
STM verified this that this nibble was in fact insignificant
and can be ignored.

But still we need to fix all inconsistencies.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>