drm/radeon: fix oops in ttm reserve when pageflipping (v2)

We need to take a reference to this object, pinning doesn't take a reference
so if userspace deletes the object it can disappear even if pinned.

v2: fix error paths to unreference properly also.

should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=32402
and
https://bugzilla.redhat.com/show_bug.cgi?id=680651

Acked-By: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: clean up the radeon kms Kconfig

- no longer in staging
- all radeons supported

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix thermal sensor reading on juniper

Uses a different method than other evergreen asics.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add missing case for cayman thermal sensor

The rest of the code is already in place.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add blit support for cayman (v2)

Allows us to use the 3D engine for memory management
and allows us to use vram beyond the BAR aperture.

v2: fix copy paste typo
Reported-by: Nils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms/blit: workaround some hw issues on evergreen+

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/radeon/atom.c: fix warning

udelay() doesn't like 8-bit arguments:

drivers/gpu/drm/radeon/atom.c: In function 'atom_op_delay':
drivers/gpu/drm/radeon/atom.c:653: warning: comparison is always false due to limited range of data type

while we're there, use msleep() rather than open-coding it.

Cc: David Airlie <airlied@linux.ie>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: bump kms version number

- proper bank size for fusion for 2D tiling.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: properly set num banks for fusion asics

Needed by userspace for 2D tiled buffer alignment

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms/atom: move dig phy init out of modesetting

It only needs to be called once at startup, not for every
modeset.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms/cayman: fix typo in register mask

Noticed by Droste on IRC.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix typo in spread spectrum code

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix tile_config value reported to userspace on cayman.

cayman is reporting the wrong tile config value to userspace, this
causes piglit mipmap generation tests to fail.

Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix incorrect comparison in cayman setup code.

This was leading to a bogus value being programmed to the backend
routing register.

Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add wait idle ioctl for eg->cayman

None of the latest GPUs had this hooked up, this is necessary for
correct operation in a lot of cases, however we should test this on a few
GPUs in these families as we've had problems in this area before.

Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/cayman: setup hdp to invalidate and flush when asked

On cayman we need to set the bit to cause HDP flushes to invalidate the
HDP cache also.

Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked

This needs to be explicitly set on btc.  It's set by default
on evergreen/fusion, so it fine to just unconditionally enable it for
all chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@gmail.com>

agp/uninorth: Fix lockups with radeon KMS and >1x.

This was based on a description by Ben Herrenschmidt:

> I've removed that SBA reset from the normal TLB invalidation path and
> left it only once after turning AGP on.

About six months ago, he said:

> I did it a bit differently, but yeah, you get the idea. I'm doing a
> patch series so don't bother pushing things too hard yet.

But I haven't seen anything from him about this since then, and people are
regularly hitting these lockups, so here we are...

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@gmail.com>

drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only

For DP/eDP, always use the standard DP SS indices.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices

If the ss clock is external, the CLK_REF bit needs to be set
in the SetPixelClock parameters.  This should fix DP failures
in the channel equalization loop.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

drm/radeon/kms: fixup eDP connector handling

It's more like LVDS then DP in some ways.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: bail early for eDP in hotplug callback

Don't try and en/disable the port as it may be a hpd event from
powering up/down the panel during a modeset or dpms.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: simplify hotplug handler logic

In the hotplug handler, just use the drm dpms functions.
If the monitor is plugged in, turn it on, if it's not,
turn it off.  This also reduces power usage by turning
off the encoder and crtc when the monitor is unplugged.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: rewrite DP handling

- reorganize the functions based on use
- clean up function naming
- rework link training to better match what we use internally
- add initial support for DP 1.2 (no MST yet)

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms/atom: add support for setting DP panel mode

Required for proper operation with DP bridges.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: atombios.h updates for DP panel mode

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/dp: add some new DP regs for DP 1.2

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: handle DP bridges

Fusion hardware often has DP to VGA/LVDS/TMDS bridges to
handle non-DP encoders.  Internally we treat them mostly
like DP.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: improve aux error handling

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: improve DP detect logic

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: add some dp encoder/connector helper funcs

Used for dp1.2 support and for dp bridges.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: make sure eDP panel is on for modesetting

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix eDP panel power function

need to wait for the panel to power up.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: adjust eDP handling (v2)

eDP is usually used as an LVDS replacement, so treat
it more like LVDS from the user perspective.

v2: encoder mode is always DP for eDP.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix up DP clock programming on DCE4/5

In DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
depending on the asic.  The crtc virtual pixel clock is derived from
the DP ref clock.

- DCE4: PPLL or ext clock
- DCE5: DCPLL or ext clock

Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
PPLL/DCPLL programming and only program the DP DTO for the
crtc virtual pixel clock.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: spread spectrum fixes

- properly mask the ss type
- don't enable ss if type is external or percentage is 0
- if ss enabled and type is external, set ref_div_src to ext clock
- prefer ASIC_INTERNAL_SS_ON_DP to LCD_Info SS_Id for eDP
- fix ss amount calculation

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: properly handle bpc >8 in atom command tables

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: DCE4.1 DIG encoders are fully routeable just like DCE3.2

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge remote branch 'keithp/drm-intel-next' of ../drm-next into drm-core-next

* 'keithp/drm-intel-next' of ../drm-next:
  drm/i915: initialize gen6 rps work queue on Sandy Bridge and Ivy Bridge
  drm/i915/sdvo: Reorder i2c initialisation before ddc proxy
  drm/i915: FDI link training broken on Ironlake by Ivybridge integration
  drm/i915: enable rc6 by default
  drm/i915: add fbc enable flag, but disable by default
  drm/i915: clean up unused ring_get_irq/ring_put_irq functions
  drm/i915: fix user irq miss in BSD ring on g4x

drm/i915: initialize gen6 rps work queue on Sandy Bridge and Ivy Bridge

It's not used on Ironlake, but is used on later generations, so make
sure it exists before we try to use it in the interrupt handlers.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

drm/i915/sdvo: Reorder i2c initialisation before ddc proxy

The ddc proxy depends upon the underlying i2c bus being selected. Under
certain configurations, the i2c-adapter functionality is queried during
initialisation and so may trigger an OOPS during boot. Hence, we need to
reorder the initialisation of the ddc proxy until after we hook up the i2c
adapter for the SDVO device.

The condition under which it fails is when the i2c_add_adapter calls
into i2c_detect which will attempt to probe all valid addresses on the
adapter iff there is a pre-existing i2c_driver with the same class as
the freshly added i2c_adapter.

So it appears to depend upon having compiled in (or loaded such a
module before i915.ko) an i2c-driver that likes to futz over the
i2c_adapters claiming DDC support.

Reported-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

drm/i915: FDI link training broken on Ironlake by Ivybridge integration

Commit 357555c00f8414057f0c12ee3f479f197264123d split out IVB-specific
register definitions for FDI link training, but a piece of that commit
stopped executing some critical code on Ironlake systems while leaving
it running on Sandybridge.

Turn that code back on both Ironlake and Sandybridge

Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drm/i915: enable rc6 by default

With FBC disabled by default, it should be safe to enable RC6.  So let's
give it a try.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>

drm/i915: add fbc enable flag, but disable by default

FBC has too many corner cases that we don't currently deal with, so
disable it by default so we can enable more important features like RC6,
which conflicts in some configurations.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31742
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>

drm/i915: clean up unused ring_get_irq/ring_put_irq functions

This patch depends on patch "drm/i915: fix user irq miss in BSD ring on
g4x".
Once the previous patch apply, ring_get_irq/ring_put_irq become unused.
So simply remove them.

Signed-off-by: Feng, Boqun <boqun.feng@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

drm/i915: fix user irq miss in BSD ring on g4x

On g4x, user interrupt in BSD ring is missed.
This is because though g4x and ironlake share the same bsd_ring,
their interrupt control interfaces have _two_ differences.

1.different irq enable/disable functions:
On g4x are i915_enable_irq and i915_disable_irq.
On ironlake are ironlake_enable_irq and ironlake_disable_irq.
2.different irq flag:
On g4x user interrupt flag in BSD ring on is I915_BSD_USER_INTERRUPT.
On ironlake is GT_BSD_USER_INTERRUPT

Old bsd_ring_get/put_irq call ring_get_irq and ring_get_irq.
ring_get_irq and ring_put_irq only call ironlake_enable/disable_irq.
So comes the irq miss on g4x.

To fix this, as other rings' code do, conditionally call different
functions(i915_enable/disable_irq and ironlake_enable/disable_irq)
and use different interrupt flags in bsd_ring_get/put_irq.

Signed-off-by: Feng, Boqun <boqun.feng@intel.com>
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Cc: stable@kernel.org
Signed-off-by: Keith Packard <keithp@keithp.com>

drm: fix nouveau_acpi build

Fix build errors when CONFIG_ACPI is enabled but MXM_WMI is not enabled
by selecting both MXM_WMI and ACPI_WMI (the latter just for kconfig
dependencies):

nouveau_acpi.c:(.text+0x2400c8): undefined reference to `mxm_wmi_call_mxmx'
nouveau_acpi.c:(.text+0x2400cf): undefined reference to `mxm_wmi_call_mxds'
nouveau_acpi.c:(.text+0x2400fe): undefined reference to `mxm_wmi_call_mxmx'
nouveau_acpi.c:(.text+0x2402ba): undefined reference to `mxm_wmi_supported

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next into drm-core-next

* 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: (55 commits)
  drm/nouveau: make cursor_set implementation consistent with other drivers
  drm/nva3/clk: better pll calculation when no fractional fb div available
  drm/nouveau/pm: translate ramcfg strap through ram restrict table
  drm/nva3/pm: allow use of divisor 16
  drm/nvc0/pm: parse clock for pll 0x0a (0x137020) from perf table
  drm/nvc0/pm: correct core/mem/shader perflvl parsing
  drm/nouveau/pm: remove memtiming support check when assigning to perflvl
  drm/nva3: support for memory timing map table
  drm/nouveau: Associate memtimings with performance levels on cards <= nv98
  drm/nva3/pm: initial pass at set_clock() hook
  drm/nvc0/gr: calculate some more of our magic numbers
  drm/nv50: respect LVDS link count from EDID on SPWG panels
  drm/nouveau: recognise DCB connector type 0x41 as LVDS
  drm/nouveau: fix uninitialised variable warning
  drm/nouveau: Fix a crash at card takedown for NV40 and older cards
  drm/nouveau: Free nv04 instmem ramin heap at card takedown
  drm/nva3: somewhat improve clock reporting
  drm/nouveau: pull refclk from vbios on limits 0x40 boards
  drm/nv40/gr: oops, fix random bits getting set in engine obj
  drm/nv50: improve nv50_pm_get_clock()
  ...

drm/nouveau: make cursor_set implementation consistent with other drivers

When xorg state tracker wants to hide the cursor it calls set_cursor
with NULL buffer_handle and size=0x0, but nouveau refuses to hide it
because size is not 64x64... which is a bit odd. Both radeon and intel
check buffer_handle before validating size of cursor, so make nouveau
implementation consistent with them.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3/clk: better pll calculation when no fractional fb div available

The core/mem/shader clocks don't support the fractional feedback divider,
causing our calculated clocks to be off by quite a lot in some cases.  To
solve this we will switch to a search-based algorithm when fN is NULL.

For my NVA8 at PL3, this actually generates identical cooefficients to
the binary driver.  Hopefully that's a good sign, and that does not
break VPLL calculation for someone..

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pm: translate ramcfg strap through ram restrict table

Hopefully this is how we're supposed to correctly handle when the RAMCFG
strap is above the number of entries in timing-related tables.

It's rather difficult to confirm without finding a configuration where
the ram restrict table doesn't map 8-15 back onto 0-7 anyway.  There's
not a single vbios in the repo which is configured differently..

In any case, this is probably still better than potentially reading
outside of the bounds of various tables..

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3/pm: allow use of divisor 16

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/pm: parse clock for pll 0x0a (0x137020) from perf table

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/pm: correct core/mem/shader perflvl parsing

We need to parse some of these other entries still, but I've yet to
determine exactly which PLLs the rest map to.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pm: remove memtiming support check when assigning to perflvl

Really not necessary here, we want to be able to see if/how we managed to
match a timingset to a performance level, even if we can't currently
program it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3: support for memory timing map table

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Associate memtimings with performance levels on cards <= nv98

v2 (Ben Skeggs): fix ramcfg strap, and remove bogus handling of perf 0x40

Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3/pm: initial pass at set_clock() hook

I still discourage anyone from actually doing this yet.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: calculate some more of our magic numbers

Again, doesn't quite match NVIDIA's, but not sure it really matters.  This
will however, match the same rules we use to calculate the other related
grctx magics.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: respect LVDS link count from EDID on SPWG panels

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: recognise DCB connector type 0x41 as LVDS

After looking at a number of different logs, it appears 0x41 likely
indicates the presense of an LVDS panel following the SPWG spec
(http://www.spwg.org/)

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: fix uninitialised variable warning

Looks like a false positive to me, but, anyways!

Reported-by: Jimmy Rentz <jb17bsome@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Fix a crash at card takedown for NV40 and older cards

NV40 and older cards (pre NV50) reserve a vram bo for the vga memory at
card init. This bo is then freed at card shutdown.  The problem is that
the ttm bo vram manager was already freed. So a crash occurs when the
vga bo is freed. The fix is to free the vga bo prior to freeing the ttm
bo vram manager. There might be other solutions but this seemed the
simplest to me.

Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Free nv04 instmem ramin heap at card takedown

Add a missing nv04 instmem ramin heap shutdown call.

Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3: somewhat improve clock reporting

Definitely not 100% correct, but, for the configurations I've seen used
it'll read back the correct clocks now.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: pull refclk from vbios on limits 0x40 boards

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv40/gr: oops, fix random bits getting set in engine obj

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: improve nv50_pm_get_clock()

Many of the nv50 cards have their shader and/or memory pll
disabled at some stage.
This patch addresses those cases, so that the function
returns the correct frequency.

When the shader pll is disabled, the blob reports 2*core clock
Whereas for memory, the data stored in the vbios. This action
is incorrect as some vbioses store a clock value that is less
than the refference clock of the pll.

Thus we are reporting the reff_clk as it is the frequency the
pll actually operates

v2 - Convert NV_INFO() messages to NV_DEBUG()
Provide more information in the actuall message

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pm: fix compilation failure when CONFIG_POWER_SUPPLY is not set

Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Reported-by: Stratos Psomadakis <psomas@ece.ntua.gr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/fifo: stick user area into a gpuobj rather than a bo

Contents will now be preserved across a suspend, unlike a pinned bo

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: no need to store context in graph_fini()

PFIFO kickoff should have handled this for us.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/fifo: restore context table on resume

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/fifo: kick channels off during suspend

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: better handling of fuc firmware

Allows per-chipset firmware to be installed, and keeps a copy in memory
for suspend/resume purposes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: support PMPEG on original nv50

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50: rename nv84_mpeg to nv50_mpeg

In preparation for adding 0x50 support.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv84: add support for PMPEG

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv40/vpe: add support for PMPEG

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0: implement support for copy engines

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nva3: implement support for copy engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove remnants of nouveau_pgraph_engine

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: fix suspend failure path to reinitialise all engines

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove remnants of nouveau_pgraph_engine from nouveau_channel

The nouveau_wait_for_idle() call should hopefully not have been actually
necessary, we *do* wait for the channel to go idle already.  If it's
an issue somehow, the chipset-specific hooks can wait for idle themselves
before taking the lock.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: move set_tile_region to nouveau_exec_engine

In the very least VPE (PMPEG and friends) also has this style of tile
region regs, lets make them just work if/when they get added.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv04/gr: move to exec engine interfaces

Like nv10-nv50, needs cleanup.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv10/gr: move to exec engine interfaces

Like nv20-nv50, needs cleanup.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv20-nv30/gr: move to exec engine interface

A bit of cleanup done along the way, but, like nv40/nv50, needs more.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv40/gr: move to exec engine interfaces

Like nv50, this needs a good cleanup.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0/gr: move to exec engine interfaces

Much nicer to do that nv50, the code was pretty much written to expect
such a change in the future.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nv50/gr: move to exec engine interfaces

This needs a massive cleanup, but to catch bugs from the interface changes
vs the engine code cleanup, this will be done later.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: working towards a common way to represent engines

There's lots of more-or-less independant engines present on NVIDIA GPUs
these days, and we generally want to perform the same operations on them.
Implementing new ones requires hooking into lots of different places,
the aim of this work is to make this simpler and cleaner.

NV84:NV98 PCRYPT moved over as a test.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: remove some unused members from dev_priv

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: move engine object creation into per-engine hooks

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: use static vidshift of 2 on volt 0x30 tables

Explanation is in the commit.  If anyone has an example of where this is
*not* the case, please report it!

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: improve memtiming table parsing

Improves the parsing of the memory timing table on NV50-NV98revA1 chipsets.

Added stepping to drm_nouveau_private to make sure newer NV98 (105M) is
zero rather than incorrect.

Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0: decode gpc/hubclient on vm fault

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0: more vm fault reasons

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nvc0: more vm fault engines

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: Fix missing whitespace checkpatch.pl errors.

This patch fixes messages such as
ERROR: space required after that ','
ERROR: spaces required around that '='

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>

drm/nouveau: Fix brace placement checkpatch.pl errors.

Fix 'ERROR: that open brace { should be on the previous line'
Fix 'ERROR: else should follow close brace }'

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>