rk818: disable otg and boost when in sleep mode

gmac: create /sys/class/vmac/exist

gmac: move drive strength control from driver to dts

vpu: fix large resolution jpeg encode fault

mmc: fix no-tuning io_e to default recommand value

mmc: dump tuning result as BOOT info

rk: fb: fix build error

rk3288: get compatible name of iommu using macro defintion

rk3288: modified for new iommu interface

camsys_drv: update with iommu interface related changed

rk: fb: 1.new intterupt set interface
2.use macro from rockchip-iovmm.h instead of string to refer mmu compatible name

rockchip: iommu: change compatible name for iommu in rk3288.dtsi

rk: ion: update iovmm_map to rockchip_iovmm_map

rockchip: iommu:
1.move out rockchip_get_sysmmu_device_by_compatible and platform_set_sysmmu
2.change compatible name in rk3288.dtsi,like "iommu,iep_mmu" to "rockchip,iep_mmu"
3.change iovmm_map etc to rockchip_iovmm_map

rk fb:modify iommu interface to match upstream request

add iommu switch in dts for iep

add iommu switch in dts for vcodec driver. disable iommu_unmap.

fiq_debugger: rockchip: enlarge kmsg buffer size

ARM: rockchip: fiq-debugger: add UART_USR macro

Merge tag 'lsk-v3.10-android-14.07' into develop-3.10

LSK v3.10 Android 14.07 release

Conflicts:
drivers/clocksource/arm_arch_timer.c
lib/Makefile

ddr_rk32.c: reinit reserve_t when chang freq success

Signed-off-by: 陈亮 <cl@rock-chips.com>

usb: udc: receive 1 SETUP packet in BDMA mode

zram: don't grab mutex in zram_slot_free_noity

[1] introduced down_write in zram_slot_free_notify to prevent race
between zram_slot_free_notify and zram_bvec_[read|write]. The race
could happen if somebody who has right permission to open swap device
is reading swap device while it is used by swap in parallel.

However, zram_slot_free_notify is called with holding spin_lock of
swap layer so we shouldn't avoid holing mutex. Otherwise, lockdep
warns it.

This patch adds new list to handle free slot and workqueue
so zram_slot_free_notify just registers slot index to be freed and
registers the request to workqueue. If workqueue is expired,
it holds mutex_lock so there is no problem any more.

If any I/O is issued, zram handles pending slot-free request
caused by zram_slot_free_notify right before handling issued
request because workqueue wouldn't be expired yet so zram I/O
request handling function can miss it.

Lastly, when zram is reset, flush_work could handle all of pending
free request so we shouldn't have memory leak.

NOTE: If zram_slot_free_notify's kmalloc with GFP_ATOMIC would be
failed, the slot will be freed when next write I/O write the slot.

[1] [57ab0485, zram: use zram->lock to protect zram_free_page()
    in swap free notify path]

* from v2
  * refactoring

* from v1
  * totally redesign

Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit a0c516cbfc7452c8cbd564525fef66d9f20b46d1)

Conflicts:
drivers/staging/zram/zram_drv.c

spi:fix the bug while read one byte

inv_mpu: only setup timer once.

camsys_drv : v0.0x12.0 ,camsys_head : v0.0x8.0

Revert "rk: cma: attempt to allocate same range memory while cma allocation failure"

This reverts commit 17beed5e65b338169ff45cfc6f9c4f28f86b3899.

rockchip:iommu:fix build error when iommu disabled

rk3288: Adjust the temp-limit to 100 degrees Celsius

rockchip:iommu:define function use inline instead of #define when iommu disabled

rockchip:iommu:fix build error when iommu disabled

rockchip:midgard:1,update gpu version to r4p1-00rel0  2,add input handler when runtime on/off 3,version to 0x09

USB: Fix usb debug log

camsys_drv : v0.0x11.0

rockchip: kernel add efuse support

Signed-off-by: 陈亮 <cl@rock-chips.com>

rk: ion: iommu: fix build error

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-misc' into linux-linaro-lsk

arm64: mm: Make icache synchronisation logic huge page aware

The __sync_icache_dcache routine will only flush the dcache for the
first page of a compound page, potentially leading to stale icache
data residing further on in a hugetlb page.

This patch addresses this issue by taking into consideration the
order of the page when flushing the dcache.

Reported-by: Mark Brown <broonie@linaro.org>
Tested-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # v3.11+
(cherry picked from commit 923b8f5044da753e4985ab15c1374ced2cdf616c)
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-misc' into linux-linaro-lsk

Conflicts:
arch/arm64/mm/tlb.S

arm64: Fix barriers used for page table modifications

The architecture specification states that both DSB and ISB are required
between page table modifications and subsequent memory accesses using the
corresponding virtual address. When TLB invalidation takes place, the
tlb_flush_* functions already have the necessary barriers. However, there are
other functions like create_mapping() for which this is not the case.

The patch adds the DSB+ISB instructions in the set_pte() function for
valid kernel mappings. The invalid pte case is handled by tlb_flush_*
and the user mappings in general have a corresponding update_mmu_cache()
call containing a DSB. Even when update_mmu_cache() isn't called, the
kernel can still cope with an unlikely spurious page fault by
re-executing the instruction.

In addition, the set_pmd, set_pud() functions gain an ISB for
architecture compliance when block mappings are created.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 54d6ba0ede61f12b2a03d74bdbf004719a9cfefc)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: mm: Optimise tlb flush logic where we have >4K granule

The tlb maintainence functions: __cpu_flush_user_tlb_range and
__cpu_flush_kern_tlb_range do not take into consideration the page
granule when looping through the address range, and repeatedly flush
tlb entries for the same page when operating with 64K pages.

This patch re-works the logic s.t. we instead advance the loop by
 1 << (PAGE_SHIFT - 12), so avoid repeating ourselves.

Also the routines have been converted from assembler to static inline
functions to aid with legibility and potential compiler optimisations.

The isb() has been removed from flush_tlb_kernel_range(.) as it is
only needed when changing the execute permission of a mapping. If one
needs to set an area of the kernel as execute/non-execute an isb()
must be inserted after the call to flush_tlb_kernel_range.

Cc: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit fa48e6f780a681cdbc7820e33259edfe1a79b9e3)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: use correct register width when retrieving ASID

The ASID is represented as an unsigned int in mm_context_t and we
currently use the mmid assembler macro to access this element of the
struct. This should be accessed with a register of 32-bit width. If
the incorrect register width is used the ASID will be returned in
bits[32:63] of the register when running under big-endian.

Fix a use of the mmid macro in tlb.S to use a 32-bit access.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit fc18047c732f6becba92618a397555927687efd3)
Signed-off-by: Mark Brown <broonie@linaro.org>

rockchip: rockchip_defconfig select rk818

pmic: rk818: modify shutdown function and fix compile errors

1. Modify the rk818 shutdown function refering to rk808.
2. Fix some compile errors.

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-efi' into linux-linaro-lsk

Conflicts:
arch/arm64/kernel/Makefile
arch/arm64/kernel/head.S

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Conflicts:
drivers/of/fdt.c

arm64: efi: only attempt efi map setup if booting via EFI

Booting a kernel with CONFIG_EFI enabled on a non-EFI system caused
an oops with the current UEFI support code.
Add the required test to prevent this.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 74bcc2499291d38b6253f9dbd6af33a195222208)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: add EFI runtime services

This patch adds EFI runtime support for arm64. This runtime support allows
the kernel to access various EFI runtime services provided by EFI firmware.
Things like reboot, real time clock, EFI boot variables, and others.

This functionality is supported for little endian kernels only. The UEFI
firmware standard specifies that the firmware be little endian. A future
patch is expected to add support for big endian kernels running with
little endian firmware.

Signed-off-by: Mark Salter <msalter@redhat.com>
[ Remove unnecessary cache/tlb maintenance. ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit f84d02755f5a9f3b88e8d15d6384da25ad6dcf5e)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/Kconfig
arch/arm64/kernel/Makefile

efi: fdt: Do not report an error during boot if UEFI is not available

Currently, fdt_find_uefi_params() reports an error if no EFI parameters
are found in the DT. This is however a valid case for non-UEFI kernel
booting. This patch checks changes the error reporting to a
pr_info("UEFI not found") when no EFI parameters are found in the DT.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 29e2435fd6d71e0136e2c2ff0433b7dbeeaaccfd)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi/arm64: efistub: remove local copy of linux_banner

The shared efistub code for ARM and arm64 contains a local copy of
linux_banner, allowing it to be referenced from separate executables
such as the ARM decompressor. However, this introduces a dependency on
generated header files, causing unnecessary rebuilds of the stub itself
and, in case of arm64, vmlinux which contains it.

On arm64, the copy is not actually needed since we can reference the
original symbol directly, and as it turns out, there may be better ways
to deal with this for ARM as well, so let's remove it from the shared
code. If it still needs to be reintroduced for ARM later, it should live
under arch/arm anyway and not in shared code.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit a55c072dfe520f8fa03cf11b07b9268a8a17820a)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi: Fix compiler warnings (unused, const, type)

This patch fixes a few compiler warning in the efi code for unused
variable, discarding const qualifier and wrong pointer type:

drivers/firmware/efi/fdt.c|66 col 22| warning: unused variable ‘name’ [-Wunused-variable]
drivers/firmware/efi/efi.c|368 col 3| warning: passing argument 3 of ‘of_get_flat_dt_prop’ from incompatible pointer type [enabled by default]
drivers/firmware/efi/efi.c|368 col 8| warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 6fb8cc82c096fd5ccf277678639193cae07125a0)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi/arm64: ignore dtb= when UEFI SecureBoot is enabled

Loading unauthenticated FDT blobs directly from storage is a security hazard,
so this should only be allowed when running with UEFI Secure Boot disabled.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 345c736edd07b657a8c48190baed2719b85d0938)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: efi: add EFI stub

This patch adds PE/COFF header fields to the start of the kernel
Image so that it appears as an EFI application to UEFI firmware.
An EFI stub is included to allow direct booting of the kernel
Image.

Signed-off-by: Mark Salter <msalter@redhat.com>
[Add support in PE/COFF header for signed images]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 3c7f255039a2ad6ee1e3890505caf0d029b22e29)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/Kconfig
arch/arm64/kernel/Makefile

arm64: Expand arm64 image header

Expand the arm64 image header to allow for co-existance with
PE/COFF header required by the EFI stub.  The PE/COFF format
requires the "MZ" header to be at offset 0, and the offset
to the PE/COFF header to be at offset 0x3c.  The image
header is expanded to allow 2 instructions at the beginning
to accommodate a benign intruction at offset 0 that includes
the "MZ" header, a magic number, and the offset to the PE/COFF
header.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 4370eec05a887b0cd4392cd5dc5b2713174745c0)
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 3033aae67ae55a86e2a0b73199984ff060effa7b)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi: Move facility flags to struct efi

As we grow support for more EFI architectures they're going to want the
ability to query which EFI features are available on the running system.
Instead of storing this information in an architecture-specific place,
stick it in the global 'struct efi', which is already the central
location for EFI state.

While we're at it, let's change the return value of efi_enabled() to be
bool and replace all references to 'facility' with 'feature', which is
the usual word used to describe the attributes of the running system.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 3e909599215456928e6b42a04f11c2517881570b)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/x86/platform/efi/efi.c

ia64/efi: Implement efi_enabled()

There's no good reason to keep efi_enabled() under CONFIG_X86 anymore,
since nothing about the implementation is specific to x86.

Set EFI feature flags in the ia64 boot path instead of claiming to
support all features. The old behaviour was actually buggy since
efi.memmap never points to a valid memory map, so we shouldn't be
claiming to support EFI_MEMMAP.

Fortunately, this bug was never triggered because EFI_MEMMAP isn't used
outside of arch/x86 currently, but that may not always be the case.

Reviewed-and-tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 092063808c498eccac8e891973bf143e7b60d723)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi: Add separate 32-bit/64-bit definitions

The traditional approach of using machine-specific types such as
'unsigned long' does not allow the kernel to interact with firmware
running in a different CPU mode, e.g. 64-bit kernel with 32-bit EFI.

Add distinct EFI structure definitions for both 32-bit and 64-bit so
that we can use them in the 32-bit and 64-bit code paths.

Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 677703cef0a148ba07d37ced649ad25b1cda2f78)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
include/linux/efi.h

Merge remote-tracking branch 'lsk/v3.10/topic/libfdt' into linux-linaro-lsk

Conflicts:
drivers/of/fdt.c

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-misc' into linux-linaro-lsk

Conflicts:
arch/arm64/kernel/head.S

lib: add fdt_empty_tree.c

CONFIG_LIBFDT support does not include fdt_empty_tree.c which is
needed by arm64 EFI stub. Add it to libfdt_files.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit adaf5687846c25613d58c0a2f5d9e024547cdbec)
Signed-off-by: Mark Brown <broonie@linaro.org>

of/fdt: Convert FDT functions to use libfdt

The kernel FDT functions predate libfdt and are much more limited in
functionality. Also, the kernel functions and libfdt functions are
not compatible with each other because they have different definitions
of node offsets. To avoid this incompatibility and in preparation to
add more FDT parsing functions which will need libfdt, let's first
convert the existing code to use libfdt.

The FDT unflattening, top-level FDT scanning, and property retrieval
functions are converted to use libfdt. The scanning code should be
re-worked to be more efficient and understandable by using libfdt to
find nodes directly by path or compatible strings.

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>
(cherry picked from commit e6a6928c3ea1d0195ed75a091e345696b916c09b)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
drivers/of/fdt.c

of/fdt: update of_get_flat_dt_prop in prep for libfdt

Make of_get_flat_dt_prop arguments compatible with libfdt fdt_getprop
call in preparation to convert FDT code to use libfdt. Make the return
value const and the property length ptr type an int.

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>
(cherry picked from commit 9d0c4dfedd96ee54fc075b16d02f82499c8cc3a6)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arc/kernel/devtree.c
arch/arm/kernel/devtree.c
arch/arm/mach-exynos/exynos.c
arch/arm/plat-samsung/s5p-dev-mfc.c
arch/powerpc/kernel/epapr_paravirt.c
arch/powerpc/kernel/prom.c
arch/powerpc/mm/hash_utils_64.c
arch/powerpc/platforms/powernv/opal.c
arch/xtensa/kernel/setup.c
drivers/of/fdt.c

of/fdt: remove unused of_scan_flat_dt_by_path

of_scan_flat_dt_by_path is unused anywhere in the kernel, so remove it.

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>
(cherry picked from commit bba04d965d06abbbe10afd3687742389107e198e)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
drivers/of/fdt.c

of: Fix the section mismatch warnings.

In tag next-20140407, building with CONFIG_DEBUG_SECTION_MISMATCH
enabled, the following WARNING is occured:

WARNING: drivers/built-in.o(.text.unlikely+0x2220): Section mismatch
in reference from the function __reserved_mem_check_root() to the
function .init.text:of_get_flat_dt_prop()
The function __reserved_mem_check_root() references
the function __init of_get_flat_dt_prop().
This is often because __reserved_mem_check_root lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.

WARNING: vmlinux.o(.text.unlikely+0xb9d0): Section mismatch in reference
from the function __reserved_mem_check_root() to the (unknown reference)
.init.data:(unknown)
The function __reserved_mem_check_root() references
the (unknown reference) __initdata (unknown).
This is often because __reserved_mem_check_root lacks a __initdata
annotation or the annotation of (unknown) is wrong.

This is cause by :
'drivers: of: add initialization code for dynamic reserved memory'.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 5b6241185e2cded07ca3f5f646b55c641928ba4e)
Signed-off-by: Mark Brown <broonie@linaro.org>

of: only scan for reserved mem when fdt present

When the reserved memory patches hit -next, several legacy (non-DT) boot
failures were detected and bisected down to that commit. There needs to
be some sanity checking whether a DT is even present before parsing the
reserved ranges.

Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit 2040b52768ebab6e7bd73af0dc63703269c62f17)
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers: of: add support for custom reserved memory drivers

Add support for custom reserved memory drivers. Call their init() function
for each reserved region and prepare for using operations provided by them
with by the reserved_mem->ops array.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit f618c4703a14672d27bc2ca5d132a844363d6f5f)
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers: of: add initialization code for dynamic reserved memory

This patch adds support for dynamically allocated reserved memory regions
declared in device tree. Such regions are defined by 'size', 'alignment'
and 'alloc-ranges' properties.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit 3f0c8206644836e4f10a6b9fc47cda6a9a372f9b)
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers: of: add initialization code for static reserved memory

This patch adds support for static (defined by 'reg' property) reserved
memory regions declared in device tree.

Memory blocks can be reliably reserved only during early boot. This must
happen before the whole memory management subsystem is initialized,
because we need to ensure that the given contiguous blocks are not yet
allocated by kernel. Also it must happen before kernel mappings for the
whole low memory are created, to ensure that there will be no mappings
(for reserved blocks). Typically, all this happens before device tree
structures are unflattened, so we need to get reserved memory layout
directly from fdt.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit e8d9d1f5485b52ec3c4d7af839e6914438f6c285)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
drivers/of/fdt.c
include/linux/of_fdt.h

drivers: of: add function to scan fdt nodes given by path

Add a function to scan the flattened device-tree starting from the
node given by the path. It is used to extract information (like reserved
memory), which is required on early boot before we can unflatten the tree.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
(cherry picked from commit 57d74bcf3072b65bde5aa540cedc976a75c48e5c)
Signed-off-by: Mark Brown <broonie@linaro.org>

OF: Add helper for matching against linux,stdout-path

devicetrees may have a linux,stdout-path property in the chosen
node describing the console device. This adds a helper function
to match a device against this property so a driver can call
add_preferred_console for a matching device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 5c19e95216b93b0d29c6a4887e69a980edc6fc81)
Signed-off-by: Mark Brown <broonie@linaro.org>

of: Specify initrd location using 64-bit

On some PAE architectures, the entire range of physical memory could reside
outside the 32-bit limit.  These systems need the ability to specify the
initrd location using 64-bit numbers.

This patch globally modifies the early_init_dt_setup_initrd_arch() function to
use 64-bit numbers instead of the current unsigned long.

There has been quite a bit of debate about whether to use u64 or phys_addr_t.
It was concluded to stick to u64 to be consistent with rest of the device
tree code. As summarized by Geert, "The address to load the initrd is decided
by the bootloader/user and set at that point later in time. The dtb should not
be tied to the kernel you are booting"

More details on the discussion can be found here:
https://lkml.org/lkml/2013/6/20/690
https://lkml.org/lkml/2012/9/13/544

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
(cherry picked from commit 374d5c9964c10373ba39bbe934f4262eb87d7114)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: KVM: define HYP and Stage-2 translation page flags

Add HYP and S2 page flags, for both normal and device memory.

Reviewed-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
(cherry picked from commit 363116073a26dbc2903d8417047597eebcc05273)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/include/asm/pgtable-hwdef.h
arch/arm64/include/asm/pgtable.h

arm64: Fix for the arm64 kern_addr_valid() function

Fix for the arm64 kern_addr_valid() function to recognize
virtual addresses in the kernel logical memory map.  The
function fails as written because it does not check whether
the addresses in that region are mapped at the pmd level to
2MB or 512MB pages, continues the page table walk to the
pte level, and issues a garbage value to pfn_valid().

Tested on 4K-page and 64K-page kernels.

Signed-off-by: Dave Anderson <anderson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit da6e4cb67c6dd1f72257c0a4a97c26dc4e80d3a7)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: Clean up the default pgprot setting

The primary aim of this patchset is to remove the pgprot_default and
prot_sect_default global variables and rely strictly on predefined
values. The original goal was to be able to run SMP kernels on UP
hardware by not setting the Shareability bit. However, it is unlikely to
see UP ARMv8 hardware and even if we do, the Shareability bit is no
longer assumed to disable cacheable accesses.

A side effect is that the device mappings now have the Shareability
attribute set. The hardware, however, should ignore it since Device
accesses are always Outer Shareable.

Following the removal of the two global variables, there is some PROT_*
macro reshuffling and cleanup, including the __PAGE_* macros (replaced
by PAGE_*).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit a501e32430d4232012ab708b8f0ce841f29e0f02)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/include/asm/io.h
arch/arm64/include/asm/pgtable.h
arch/arm64/mm/mmu.c

arm64: Add function to create identity mappings

At boot time, before switching to a virtual UEFI memory map, firmware
expects UEFI memory and IO regions to be identity mapped whenever
kernel makes runtime services calls. The existing early boot code
creates an identity map of kernel text/data but this is not sufficient
for UEFI. This patch adds a create_id_mapping() function which reuses
the core code of the existing create_mapping().

Signed-off-by: Mark Salter <msalter@redhat.com>
[ Fixed error message formatting (%pa). ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit d7ecbddf4caefbac1b99478dd2b679f83dfc2545)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/mm/mmu.c

efivars: Add compatibility code for compat tasks

It seems people are using 32-bit efibootmgr on top of 64-bit kernels,
which will currently fail horribly when using the efivars interface,
which is the traditional efibootmgr backend (the other being efivarfs).

Since there is no versioning info in the data structure, figure out when
we need to munge the structure data via judicious use of
is_compat_task().

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit e33655a386ed3b26ad36fb97a47ebb1c2ca1e928)
Signed-off-by: Mark Brown <broonie@linaro.org>

efivars: Refactor sanity checking code into separate function

Move a large chunk of code that checks the validity of efi_variable into
a new function, because we'll also need to use it for the compat code.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 54d2fbfb0c9d341c891926100ed0e5d4c4b0c987)
Signed-off-by: Mark Brown <broonie@linaro.org>

efivars: Stop passing a struct argument to efivar_validate()

In preparation for compat support, we can't assume that user variable
object is represented by a 'struct efi_variable'. Convert the validation
functions to take the variable name as an argument, which is the only
piece of the struct that was ever used anyway.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit a5d92ad32dad94fd8f3f61778561d532bb3a2f77)
Signed-off-by: Mark Brown <broonie@linaro.org>

efivars: Check size of user object

Unbelieavably there are no checks to see whether the data structure
passed to 'new_var' and 'del_var' is the size that we expect. Let's add
some for better robustness.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit e003bbee2a6a19a4c733335989284caf1b179e0d)
Signed-off-by: Mark Brown <broonie@linaro.org>

efivars: Use local variables instead of a pointer dereference

In order to support a compat interface we need to stop passing pointers
to structures around, since the type of structure is going to depend on
whether the current task is a compat task.

Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit bafc84d539c0ffa916037840df54428623abc3e6)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi: Use NULL instead of 0 for pointer

Fix following sparse warnings:

drivers/firmware/efi/efivars.c:230:66: warning:
 Using plain integer as NULL pointer
drivers/firmware/efi/efi.c:236:27: warning:
 Using plain integer as NULL pointer

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 69e608411473ac56358ef35277563982d0565381)
Signed-off-by: Mark Brown <broonie@linaro.org>

efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed

Currently, when mounting pstore file system, a read callback of
efi_pstore driver runs mutiple times as below.

- In the first read callback, scan efivar_sysfs_list from head and pass
  a kmsg buffer of a entry to an upper pstore layer.
- In the second read callback, rescan efivar_sysfs_list from the entry
  and pass another kmsg buffer to it.
- Repeat the scan and pass until the end of efivar_sysfs_list.

In this process, an entry is read across the multiple read function
calls. To avoid race between the read and erasion, the whole process
above is protected by a spinlock, holding in open() and releasing in
close().

At the same time, kmemdup() is called to pass the buffer to pstore
filesystem during it. And then, it causes a following lockdep warning.

To make the dynamic memory allocation runnable without taking spinlock,
holding off a deletion of sysfs entry if it happens while scanning it
via efi_pstore, and deleting it after the scan is completed.

To implement it, this patch introduces two flags, scanning and deleting,
to efivar_entry.

On the code basis, it seems that all the scanning and deleting logic is
not needed because __efivars->lock are not dropped when reading from the
EFI variable store.

But, the scanning and deleting logic is still needed because an
efi-pstore and a pstore filesystem works as follows.

In case an entry(A) is found, the pointer is saved to psi->data.  And
efi_pstore_read() passes the entry(A) to a pstore filesystem by
releasing  __efivars->lock.

And then, the pstore filesystem calls efi_pstore_read() again and the
same entry(A), which is saved to psi->data, is used for resuming to scan
a sysfs-list.

So, to protect the entry(A), the logic is needed.

[    1.143710] ------------[ cut here ]------------
[    1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110()
[    1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
[    1.144058] Modules linked in:
[    1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2
[    1.144058]  0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28
[    1.144058]  ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046
[    1.144058]  00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78
[    1.144058] Call Trace:
[    1.144058]  [<ffffffff816614a5>] dump_stack+0x54/0x74
[    1.144058]  [<ffffffff8105510d>] warn_slowpath_common+0x7d/0xa0
[    1.144058]  [<ffffffff8105517c>] warn_slowpath_fmt+0x4c/0x50
[    1.144058]  [<ffffffff8131290f>] ? vsscanf+0x57f/0x7b0
[    1.144058]  [<ffffffff810bbd74>] lockdep_trace_alloc+0x104/0x110
[    1.144058]  [<ffffffff81192da0>] __kmalloc_track_caller+0x50/0x280
[    1.144058]  [<ffffffff815147bb>] ? efi_pstore_read_func.part.1+0x12b/0x170
[    1.144058]  [<ffffffff8115b260>] kmemdup+0x20/0x50
[    1.144058]  [<ffffffff815147bb>] efi_pstore_read_func.part.1+0x12b/0x170
[    1.144058]  [<ffffffff81514800>] ? efi_pstore_read_func.part.1+0x170/0x170
[    1.144058]  [<ffffffff815148b4>] efi_pstore_read_func+0xb4/0xe0
[    1.144058]  [<ffffffff81512b7b>] __efivar_entry_iter+0xfb/0x120
[    1.144058]  [<ffffffff8151428f>] efi_pstore_read+0x3f/0x50
[    1.144058]  [<ffffffff8128d7ba>] pstore_get_records+0x9a/0x150
[    1.158207]  [<ffffffff812af25c>] ? selinux_d_instantiate+0x1c/0x20
[    1.158207]  [<ffffffff8128ce30>] ? parse_options+0x80/0x80
[    1.158207]  [<ffffffff8128ced5>] pstore_fill_super+0xa5/0xc0
[    1.158207]  [<ffffffff811ae7d2>] mount_single+0xa2/0xd0
[    1.158207]  [<ffffffff8128ccf8>] pstore_mount+0x18/0x20
[    1.158207]  [<ffffffff811ae8b9>] mount_fs+0x39/0x1b0
[    1.158207]  [<ffffffff81160550>] ? __alloc_percpu+0x10/0x20
[    1.158207]  [<ffffffff811c9493>] vfs_kern_mount+0x63/0xf0
[    1.158207]  [<ffffffff811cbb0e>] do_mount+0x23e/0xa20
[    1.158207]  [<ffffffff8115b51b>] ? strndup_user+0x4b/0xf0
[    1.158207]  [<ffffffff811cc373>] SyS_mount+0x83/0xc0
[    1.158207]  [<ffffffff81673cc2>] system_call_fastpath+0x16/0x1b
[    1.158207] ---[ end trace 61981bc62de9f6f4 ]---

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Tested-by: Madper Xie <cxie@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit e0d59733f6b1796b8d6692642c87d7dd862c3e3a)
Signed-off-by: Mark Brown <broonie@linaro.org>

efivars: Mark local function as static

This fixes the following sparse warning
drivers/firmware/efi/efivars.c:567:6: warning: symbol 'efivars_sysfs_exit' was not declared. Should it be static?

Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 6f9dd30c22da4e48c4b7b837e9641f072e673161)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi: Move facility flags to struct efi

As we grow support for more EFI architectures they're going to want the
ability to query which EFI features are available on the running system.
Instead of storing this information in an architecture-specific place,
stick it in the global 'struct efi', which is already the central
location for EFI state.

While we're at it, let's change the return value of efi_enabled() to be
bool and replace all references to 'facility' with 'feature', which is
the usual word used to describe the attributes of the running system.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit 3e909599215456928e6b42a04f11c2517881570b)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/x86/include/asm/efi.h
arch/x86/platform/efi/efi.c

efi: Add proper definitions for some EFI function pointers.

The x86/AMD64 EFI stubs must use a call wrapper to convert between
the Linux and EFI ABIs, so void pointers are sufficient.  For ARM,
the ABIs are compatible, so we can directly invoke the function
pointers.  The functions that are used by the ARM stub are updated
to match the EFI definitions.
Also add some EFI types used by EFI functions.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit ed37ddffe201bfad7be3c45bc08bd65b5298adca)
Signed-off-by: Mark Brown <broonie@linaro.org>

efi: create memory map iteration helper

There are a lot of places in the kernel which iterate through an
EFI memory map. Most of these places use essentially the same
for-loop code. This patch adds a for_each_efi_memory_desc()
helper to clean up all of the existing duplicate code and avoid
more in the future.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
(cherry picked from commit e885cd805fc6e65ef5150a211c7bac02f925af04)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: place initial page tables above the kernel

Currently we place swapper_pg_dir and idmap_pg_dir below the kernel
image, between PHYS_OFFSET and (PHYS_OFFSET + TEXT_OFFSET). However,
bootloaders may use portions of this memory below the kernel and we do
not parse the memory reservation list until after the MMU has been
enabled. As such we may clobber some memory a bootloader wishes to have
preserved.

To enable the use of all of this memory by bootloaders (when the
required memory reservations are communicated to the kernel) it is
necessary to move our initial page tables elsewhere. As we currently
have an effectively unbound requirement for memory at the end of the
kernel image for .bss, we can place the page tables here.

This patch moves the initial page table to the end of the kernel image,
after the BSS. As they do not consist of any initialised data they will
be stripped from the kernel Image as with the BSS. The BSS clearing
routine is updated to stop at __bss_stop rather than _end so as to not
clobber the page tables, and memory reservations made redundant by the
new organisation are removed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit bd00cd5f8c8c3c282bb1e1eac6a6679a4f808091)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/mm/init.c

arm64: Relax the kernel cache requirements for boot

With system caches for the host OS or architected caches for guest OS we
cannot easily guarantee that there are no dirty or stale cache lines for
the areas of memory written by the kernel during boot with the MMU off
(therefore non-cacheable accesses).

This patch adds the necessary cache maintenance during boot and relaxes
the booting requirements.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit c218bca74eeafa2f8528b6bbb34d112075fcf40a)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/kernel/head.S

arm64: head: create a new function for setting the boot_cpu_mode flag

Currently, the code for setting the __cpu_boot_mode flag is munged in
with el2_setup. This makes things difficult on a BE bringup as a
memory access has to have occurred before el2_setup which is the place
that we'd like to set the endianess on the current EL.

Create a new function for setting __cpu_boot_mode and have el2_setup
return the mode the CPU. Also define a new constant in virt.h,
BOOT_CPU_MODE_EL1, for readability.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 828e9834e9a5b7e61046aa3c5f603a4fecba2fb4)
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Merge branch 'v3.10/topic/misc' into linux-linaro-lsk

tty: serial: samsung: drop uart_port->lock before calling tty_flip_buffer_push()

The current driver triggers a lockdep warning for if tty_flip_buffer_push() is
called with uart_port->lock locked. This never shows up on UP kernels and comes
up only on SMP kernels.

Crash looks like this (produced with samsung.c driver):

-----
[<c0014d58>] (unwind_backtrace+0x0/0xf8) from [<c0011908>] (show_stack+0x10/0x14)
[<c0011908>] (show_stack+0x10/0x14) from [<c035da34>] (dump_stack+0x6c/0xac)
[<c035da34>] (dump_stack+0x6c/0xac) from [<c01b59ac>] (do_raw_spin_unlock+0xc4/0xd8)
[<c01b59ac>] (do_raw_spin_unlock+0xc4/0xd8) from [<c03627e4>] (_raw_spin_unlock_irqrestore+0xc/0)
[<c03627e4>] (_raw_spin_unlock_irqrestore+0xc/0x38) from [<c020a1a8>] (s3c24xx_serial_rx_chars+0)
[<c020a1a8>] (s3c24xx_serial_rx_chars+0x12c/0x260) from [<c020aae8>] (s3c64xx_serial_handle_irq+)
[<c020aae8>] (s3c64xx_serial_handle_irq+0x48/0x60) from [<c006aaa0>] (handle_irq_event_percpu+0x)
[<c006aaa0>] (handle_irq_event_percpu+0x50/0x194) from [<c006ac20>] (handle_irq_event+0x3c/0x5c)
[<c006ac20>] (handle_irq_event+0x3c/0x5c) from [<c006d864>] (handle_fasteoi_irq+0x80/0x13c)
[<c006d864>] (handle_fasteoi_irq+0x80/0x13c) from [<c006a4a4>] (generic_handle_irq+0x20/0x30)
[<c006a4a4>] (generic_handle_irq+0x20/0x30) from [<c000f454>] (handle_IRQ+0x38/0x94)
[<c000f454>] (handle_IRQ+0x38/0x94) from [<c0008538>] (gic_handle_irq+0x34/0x68)
[<c0008538>] (gic_handle_irq+0x34/0x68) from [<c00123c0>] (__irq_svc+0x40/0x70)
Exception stack(0xc04cdf70 to 0xc04cdfb8)
df60:                                     00000000 00000000 0000166e 00000000
df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000
dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff
[<c00123c0>] (__irq_svc+0x40/0x70) from [<c000f75c>] (arch_cpu_idle+0x28/0x30)
[<c000f75c>] (arch_cpu_idle+0x28/0x30) from [<c0054888>] (cpu_startup_entry+0x5c/0x148)
[<c0054888>] (cpu_startup_entry+0x5c/0x148) from [<c0497aa4>] (start_kernel+0x334/0x38c)
BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360
 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1
CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2
Workqueue: events flush_to_ldisc
[<c0014d58>] (unwind_backtrace+0x0/0xf8) from [<c0011908>] (show_stack+0x10/0x14)
[<c0011908>] (show_stack+0x10/0x14) from [<c035da34>] (dump_stack+0x6c/0xac)
[<c035da34>] (dump_stack+0x6c/0xac) from [<c01b581c>] (do_raw_spin_lock+0x100/0x17c)
[<c01b581c>] (do_raw_spin_lock+0x100/0x17c) from [<c03628a0>] (_raw_spin_lock_irqsave+0x20/0x28)
[<c03628a0>] (_raw_spin_lock_irqsave+0x20/0x28) from [<c0203224>] (uart_start+0x18/0x34)
[<c0203224>] (uart_start+0x18/0x34) from [<c01ef890>] (__receive_buf+0x4b4/0x738)
[<c01ef890>] (__receive_buf+0x4b4/0x738) from [<c01efb44>] (n_tty_receive_buf2+0x30/0x98)
[<c01efb44>] (n_tty_receive_buf2+0x30/0x98) from [<c01f2ba8>] (flush_to_ldisc+0xec/0x138)
[<c01f2ba8>] (flush_to_ldisc+0xec/0x138) from [<c0031af0>] (process_one_work+0xfc/0x348)
[<c0031af0>] (process_one_work+0xfc/0x348) from [<c0032138>] (worker_thread+0x138/0x37c)
[<c0032138>] (worker_thread+0x138/0x37c) from [<c0037a7c>] (kthread+0xa4/0xb0)
[<c0037a7c>] (kthread+0xa4/0xb0) from [<c000e5f8>] (ret_from_fork+0x14/0x3c)
-----

Release the port lock before calling tty_flip_buffer_push() and reacquire it
after the call.

Similar stuff was already done for few other drivers in the past, like:

commit 2389b272168ceec056ca1d8a870a97fa9c26e11a
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Tue May 29 21:53:50 2007 +0100

    [ARM] 4417/1: Serial: Fix AMBA drivers locking

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit f5693ea2710cd9f26ed2bfa917f7ed68e9502464)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

tty: serial: altera: drop uart_port->lock before calling tty_flip_buffer_push()

The current driver triggers a lockdep warning for if tty_flip_buffer_push() is
called with uart_port->lock locked. This never shows up on UP kernels and comes
up only on SMP kernels.

Crash looks like this (produced with samsung.c driver):

-----
[<c0014d58>] (unwind_backtrace+0x0/0xf8) from [<c0011908>] (show_stack+0x10/0x14)
[<c0011908>] (show_stack+0x10/0x14) from [<c035da34>] (dump_stack+0x6c/0xac)
[<c035da34>] (dump_stack+0x6c/0xac) from [<c01b59ac>] (do_raw_spin_unlock+0xc4/0xd8)
[<c01b59ac>] (do_raw_spin_unlock+0xc4/0xd8) from [<c03627e4>] (_raw_spin_unlock_irqrestore+0xc/0)
[<c03627e4>] (_raw_spin_unlock_irqrestore+0xc/0x38) from [<c020a1a8>] (s3c24xx_serial_rx_chars+0)
[<c020a1a8>] (s3c24xx_serial_rx_chars+0x12c/0x260) from [<c020aae8>] (s3c64xx_serial_handle_irq+)
[<c020aae8>] (s3c64xx_serial_handle_irq+0x48/0x60) from [<c006aaa0>] (handle_irq_event_percpu+0x)
[<c006aaa0>] (handle_irq_event_percpu+0x50/0x194) from [<c006ac20>] (handle_irq_event+0x3c/0x5c)
[<c006ac20>] (handle_irq_event+0x3c/0x5c) from [<c006d864>] (handle_fasteoi_irq+0x80/0x13c)
[<c006d864>] (handle_fasteoi_irq+0x80/0x13c) from [<c006a4a4>] (generic_handle_irq+0x20/0x30)
[<c006a4a4>] (generic_handle_irq+0x20/0x30) from [<c000f454>] (handle_IRQ+0x38/0x94)
[<c000f454>] (handle_IRQ+0x38/0x94) from [<c0008538>] (gic_handle_irq+0x34/0x68)
[<c0008538>] (gic_handle_irq+0x34/0x68) from [<c00123c0>] (__irq_svc+0x40/0x70)
Exception stack(0xc04cdf70 to 0xc04cdfb8)
df60:                                     00000000 00000000 0000166e 00000000
df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000
dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff
[<c00123c0>] (__irq_svc+0x40/0x70) from [<c000f75c>] (arch_cpu_idle+0x28/0x30)
[<c000f75c>] (arch_cpu_idle+0x28/0x30) from [<c0054888>] (cpu_startup_entry+0x5c/0x148)
[<c0054888>] (cpu_startup_entry+0x5c/0x148) from [<c0497aa4>] (start_kernel+0x334/0x38c)
BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360
 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1
CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2
Workqueue: events flush_to_ldisc
[<c0014d58>] (unwind_backtrace+0x0/0xf8) from [<c0011908>] (show_stack+0x10/0x14)
[<c0011908>] (show_stack+0x10/0x14) from [<c035da34>] (dump_stack+0x6c/0xac)
[<c035da34>] (dump_stack+0x6c/0xac) from [<c01b581c>] (do_raw_spin_lock+0x100/0x17c)
[<c01b581c>] (do_raw_spin_lock+0x100/0x17c) from [<c03628a0>] (_raw_spin_lock_irqsave+0x20/0x28)
[<c03628a0>] (_raw_spin_lock_irqsave+0x20/0x28) from [<c0203224>] (uart_start+0x18/0x34)
[<c0203224>] (uart_start+0x18/0x34) from [<c01ef890>] (__receive_buf+0x4b4/0x738)
[<c01ef890>] (__receive_buf+0x4b4/0x738) from [<c01efb44>] (n_tty_receive_buf2+0x30/0x98)
[<c01efb44>] (n_tty_receive_buf2+0x30/0x98) from [<c01f2ba8>] (flush_to_ldisc+0xec/0x138)
[<c01f2ba8>] (flush_to_ldisc+0xec/0x138) from [<c0031af0>] (process_one_work+0xfc/0x348)
[<c0031af0>] (process_one_work+0xfc/0x348) from [<c0032138>] (worker_thread+0x138/0x37c)
[<c0032138>] (worker_thread+0x138/0x37c) from [<c0037a7c>] (kthread+0xa4/0xb0)
[<c0037a7c>] (kthread+0xa4/0xb0) from [<c000e5f8>] (ret_from_fork+0x14/0x3c)
-----

Release the port lock before calling tty_flip_buffer_push() and reacquire it
after the call.

Similar stuff was already done for few other drivers in the past, like:

commit 2389b272168ceec056ca1d8a870a97fa9c26e11a
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Tue May 29 21:53:50 2007 +0100

    [ARM] 4417/1: Serial: Fix AMBA drivers locking

Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit dd085ed8ef6c97e0b606da304856b36e0d3496ac)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

MIPI: 1.fixed compile error; 2.support VOP BIG/LIT

arm64: Align the kbuild output for VDSOL and VDSOA

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit ad789ba5f7086138461420d2156478d33fb61077)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: vdso: put vdso datapage in a separate vma

The VDSO datapage doesn't need to be executable (no code there) or
CoW-able (the kernel writes the page, so a private copy is totally
useless).

This patch moves the datapage into its own VMA, identified as "[vvar]"
in /proc/<pid>/maps.

Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 8715493852783358ef8656a0054a14bf822509cf)
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: Remove duplicate (SWAPPER|IDMAP)_DIR_SIZE definitions

Just keep the asm/page.h definition as this is included in vmlinux.lds.S
as well.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
(cherry picked from commit b2f8c07bcb7d1a3575f41444d2d8048d0c922762)
Signed-off-by: Mark Brown <broonie@linaro.org>