rtc: rtc-at91rm9200: fix infinite wait for ACKUPD irq

commit 2fe121e1f5aa3bf31b418a9790db6c400e922291 upstream.

The rtc user must wait at least 1 sec between each time/calandar update
(see atmel's datasheet chapter "Updating Time/Calendar").

Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for
the at91_rtc_wait_upd_rdy event if the rtc is not ready.

This patch fixes a deadlock in an uninterruptible wait when the RTC is
updated more than once every second.  AFAICT the bug is here from the
beginning, but I think we should at least backport this fix to 3.10 and
the following longterm and stable releases.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Bryan Evenson <bevenson@melinkcorp.com>
Tested-by: Bryan Evenson <bevenson@melinkcorp.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.44

ahci: add PCI ID for Marvell 88SE91A0 SATA Controller

commit 754a292fe6b08196cb135c03b404444e17de520a upstream.

Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s
Controller by adding its PCI ID.

Signed-off-by: Andreas Schrägle <ajs124.ajs124@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: Add Device ID for HighPoint RocketRaid 642L

commit d251836508fb26cd1a22b41381739835ee23728d upstream.

This device normally comes with a proprietary driver, using a web GUI
to configure RAID:
 http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver,
being just a Marvell 88SE9235.

Devices 640L, 644L, 644LS should also be supported but not tested here.

Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: drop harmful wait optimization

commit 07cd7be3d92eeeae1f92a017f2cfe4fdd9256526 upstream.

It my take time till ME_RDY will be cleared after the reset,
so we cannot check the bit before we got the interrupt

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: megaraid: Use resource_size_t for PCI resources, not long

commit 11f8a7b31f2140b0dc164bb484281235ffbe51d3 upstream.

The assumption that sizeof(long) >= sizeof(resource_size_t) can lead to
truncation of the PCI resource address, meaning this driver didn't work
on 32-bit systems with 64-bit PCI adressing ranges.

Signed-off-by: Ben Collins <ben.c@servergy.com>
Acked-by: Sumit Saxena <sumit.saxena@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

auditsc: audit_krule mask accesses need bounds checking

commit a3c54931199565930d6d84f4c3456f6440aefd41 upstream.

Fixes an easy DoS and possible information disclosure.

This does nothing about the broken state of x32 auditing.

eparis: If the admin has enabled auditd and has specifically loaded
audit rules.  This bug has been around since before git.  Wow...

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/compaction: make isolate_freepages start at pageblock boundary

commit 49e068f0b73dd042c186ffa9b420a9943e90389a upstream.

The compaction freepage scanner implementation in isolate_freepages()
starts by taking the current cc->free_pfn value as the first pfn.  In a
for loop, it scans from this first pfn to the end of the pageblock, and
then subtracts pageblock_nr_pages from the first pfn to obtain the first
pfn for the next for loop iteration.

This means that when cc->free_pfn starts at offset X rather than being
aligned on pageblock boundary, the scanner will start at offset X in all
scanned pageblock, ignoring potentially many free pages.  Currently this
can happen when

 a) zone's end pfn is not pageblock aligned, or

 b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE
    enabled and a hole spanning the beginning of a pageblock

This patch fixes the problem by aligning the initial pfn in
isolate_freepages() to pageblock boundary.  This also permits replacing
the end-of-pageblock alignment within the for loop with a simple
pageblock_nr_pages increment.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: compaction: detect when scanners meet in isolate_freepages

commit 7ed695e069c3cbea5e1fd08f84a04536da91f584 upstream.

Compaction of a zone is finished when the migrate scanner (which begins
at the zone's lowest pfn) meets the free page scanner (which begins at
the zone's highest pfn).  This is detected in compact_zone() and in the
case of direct compaction, the compact_blockskip_flush flag is set so
that kswapd later resets the cached scanner pfn's, and a new compaction
may again start at the zone's borders.

The meeting of the scanners can happen during either scanner's activity.
However, it may currently fail to be detected when it occurs in the free
page scanner, due to two problems.  First, isolate_freepages() keeps
free_pfn at the highest block where it isolated pages from, for the
purposes of not missing the pages that are returned back to allocator
when migration fails.  Second, failing to isolate enough free pages due
to scanners meeting results in -ENOMEM being returned by
migrate_pages(), which makes compact_zone() bail out immediately without
calling compact_finished() that would detect scanners meeting.

This failure to detect scanners meeting might result in repeated
attempts at compaction of a zone that keep starting from the cached
pfn's close to the meeting point, and quickly failing through the
-ENOMEM path, without the cached pfns being reset, over and over.  This
has been observed (through additional tracepoints) in the third phase of
the mmtests stress-highalloc benchmark, where the allocator runs on an
otherwise idle system.  The problem was observed in the DMA32 zone,
which was used as a fallback to the preferred Normal zone, but on the
4GB system it was actually the largest zone.  The problem is even
amplified for such fallback zone - the deferred compaction logic, which
could (after being fixed by a previous patch) reset the cached scanner
pfn's, is only applied to the preferred zone and not for the fallbacks.

The problem in the third phase of the benchmark was further amplified by
commit 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy") which
resulted in a non-deterministic regression of the allocation success
rate from ~85% to ~65%.  This occurs in about half of benchmark runs,
making bisection problematic.  It is unlikely that the commit itself is
buggy, but it should put more pressure on the DMA32 zone during phases 1
and 2, which may leave it more fragmented in phase 3 and expose the bugs
that this patch fixes.

The fix is to make scanners meeting in isolate_freepage() stay that way,
and to check in compact_zone() for scanners meeting when migrate_pages()
returns -ENOMEM.  The result is that compact_finished() also detects
scanners meeting and sets the compact_blockskip_flush flag to make
kswapd reset the scanner pfn's.

The results in stress-highalloc benchmark show that the "regression" by
commit 81c0a2bb515f in phase 3 no longer occurs, and phase 1 and 2
allocation success rates are also significantly improved.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: compaction: reset cached scanner pfn's before reading them

commit d3132e4b83e6bd383c74d716f7281d7c3136089c upstream.

Compaction caches pfn's for its migrate and free scanners to avoid
scanning the whole zone each time.  In compact_zone(), the cached values
are read to set up initial values for the scanners.  There are several
situations when these cached pfn's are reset to the first and last pfn
of the zone, respectively.  One of these situations is when a compaction
has been deferred for a zone and is now being restarted during a direct
compaction, which is also done in compact_zone().

However, compact_zone() currently reads the cached pfn's *before*
resetting them.  This means the reset doesn't affect the compaction that
performs it, and with good chance also subsequent compactions, as
update_pageblock_skip() is likely to be called and update the cached
pfn's to those being processed.  Another chance for a successful reset
is when a direct compaction detects that migration and free scanners
meet (which has its own problems addressed by another patch) and sets
update_pageblock_skip flag which kswapd uses to do the reset because it
goes to sleep.

This is clearly a bug that results in non-deterministic behavior, so
this patch moves the cached pfn reset to be performed *before* the
values are read.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix alua_access_state attribute OOPs for un-configured devices

commit f1453773514bb8b0bba0716301e8c8f17f8d39c7 upstream.

This patch fixes a OOPs where an attempt to write to the per-device
alua_access_state configfs attribute at:

  /sys/kernel/config/target/core/$HBA/$DEV/alua/$TG_PT_GP/alua_access_state

results in an NULL pointer dereference when the backend device has not
yet been configured.

This patch adds an explicit check for DF_CONFIGURED, and fails with
-ENODEV to avoid this case.

Reported-by: Chris Boot <crb@tiger-computing.co.uk>
Reported-by: Philip Gaw <pgaw@darktech.org.uk>
Cc: Chris Boot <crb@tiger-computing.co.uk>
Cc: Philip Gaw <pgaw@darktech.org.uk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Allow READ_CAPACITY opcode in ALUA Standby access state

commit e7810c2d2c37fa8e58dda74b00790dab60fe6fba upstream.

This patch allows READ_CAPACITY + SAI_READ_CAPACITY_16 opcode
processing to occur while the associated ALUA group is in Standby
access state.

This is required to avoid host side LUN probe failures during the
initial scan if an ALUA group has already implicitly changed into
Standby access state.

This addresses a bug reported by Chris + Philip using dm-multipath
+ ESX hosts configured with ALUA multipath.

(Drop v3.15 specific set_ascq usage - nab)

Reported-by: Chris Boot <crb@tiger-computing.co.uk>
Reported-by: Philip Gaw <pgaw@darktech.org.uk>
Cc: Chris Boot <crb@tiger-computing.co.uk>
Cc: Philip Gaw <pgaw@darktech.org.uk>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix wrong buffer / buffer overrun in iscsi_change_param_value()

commit 79d59d08082dd0a0a18f8ceb78c99f9f321d72aa upstream.

In non-leading connection login, iscsi_login_non_zero_tsih_s1() calls
iscsi_change_param_value() with the buffer it uses to hold the login
PDU, not a temporary buffer.  This leads to the login header getting
corrupted and login failing for non-leading connections in MC/S.

Fix this by adding a wrapper iscsi_change_param_sprintf() that handles
the temporary buffer itself to avoid confusion.  Also handle sending a
reject in case of failure in the wrapper, which lets the calling code
get quite a bit smaller and easier to read.

Finally, bump the size of the temporary buffer from 32 to 64 bytes to be
safe, since "MaxRecvDataSegmentLength=" by itself is 25 bytes; with a
trailing NUL, a value >= 1M will lead to a buffer overrun.  (This isn't
the default but we don't need to run right at the ragged edge here)

(Fix up context changes for v3.10.y - nab)

Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser-target: Fix multi network portal shutdown regression

commit 2363d196686e44c0158929e7cf96c8589a24a81b upstream.

This patch fixes a iser-target specific regression introduced in
v3.15-rc6 with:

commit 14f4b54fe38f3a8f8392a50b951c8aa43b63687a
Author: Sagi Grimberg <sagig@mellanox.com>
Date:   Tue Apr 29 13:13:47 2014 +0300

    Target/iscsi,iser: Avoid accepting transport connections during stop stage

where the change to set iscsi_np->enabled = false within
iscsit_clear_tpg_np_login_thread() meant that a iscsi_np with
two iscsi_tpg_np exports would have it's parent iscsi_np set
to a disabled state, even if other iscsi_tpg_np exports still
existed.

This patch changes iscsit_clear_tpg_np_login_thread() to only
set iscsi_np->enabled = false when shutdown = true, and also
changes iscsit_del_np() to set iscsi_np->enabled = true when
iscsi_np->np_exports is non zero.

(Fix up context changes for v3.10.y - nab)

Cc: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Target/iscsi,iser: Avoid accepting transport connections during stop stage

commit 14f4b54fe38f3a8f8392a50b951c8aa43b63687a upstream.

When the target is in stop stage, iSER transport initiates RDMA disconnects.
The iSER initiator may wish to establish a new connection over the
still existing network portal. In this case iSER transport should not
accept and resume new RDMA connections. In order to learn that, iscsi_np
is added with enabled flag so the iSER transport can check when deciding
weather to accept and resume a new connection request.

The iscsi_np is enabled after successful transport setup, and disabled
before iscsi_np login threads are cleaned up.

(Fix up context changes for v3.10.y - nab)

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipv4: defrag: set local_df flag on defragmented skb

commit 895162b1101b3ea5db08ca6822ae9672717efec0 upstream.

else we may fail to forward skb even if original fragments do fit
outgoing link mtu:

1. remote sends 2k packets in two 1000 byte frags, DF set
2. we want to forward but only see '2k > mtu and DF set'
3. we then send icmp error saying that outgoing link is 1500

But original sender never sent a packet that would not fit
the outgoing link.

Setting local_df makes outgoing path test size vs.
IPCB(skb)->frag_max_size, so we will still send the correct
error in case the largest original size did not fit
outgoing link mtu.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Suggested-by: Maxime Bizon <mbizon@freebox.fr>
Fixes: 5f2d04f1f9 (ipv4: fix path MTU discovery with connection tracking)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree

commit 6e20bae8a39c40d4e03698e4160bad2d2629062b upstream.

The mvebu-devbus driver had a serious bug, which lead to a 8 bits bus
width declared in the Device Tree being considered as a 16 bits bus
width when configuring the hardware.

This bug in mvebu-devbus driver was compensated by a symetric mistake
in the Armada XP OpenBlocks AX3 Device Tree: a 8 bits bus width was
declared, even though the hardware actually has a 16 bits bus width
connection with the NOR flash.

Now that we have fixed the mvebu-devbus driver to behave according to
its Device Tree binding, this commit fixes the problematic Device Tree
files as well.

This bug was introduced in commit
a7d4f81821f7eec3175f8e23dd6949c71ab2da43 ('ARM: mvebu: Add support for
NOR flash device on Openblocks AX3 board') which was merged in v3.10.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397489361-5833-5-git-send-email-thomas.petazzoni@free-electrons.com
Fixes: a7d4f81821f7 ('ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board')
Cc: stable@vger.kernel.org # v3.10+
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree

commit 1a88f809ccb5db1509a7514b187c00b3a995fc82 upstream.

The mvebu-devbus driver had a serious bug, which lead to a 8 bits bus
width declared in the Device Tree being considered as a 16 bits bus
width when configuring the hardware.

This bug in mvebu-devbus driver was compensated by a symetric mistake
in the Armada XP GP Device Tree: a 8 bits bus width was declared, even
though the hardware actually has a 16 bits bus width connection with
the NOR flash.

Now that we have fixed the mvebu-devbus driver to behave according to
its Device Tree binding, this commit fixes the problematic Device Tree
files as well.

This bug was introduced in commit
da8d1b38356853c37116f9afa29f15648d7fb159 ('ARM: mvebu: Add support for
NOR flash device on Armada XP-GP board') which was merged in v3.10.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397489361-5833-3-git-send-email-thomas.petazzoni@free-electrons.com
Fixes: da8d1b383568 ('ARM: mvebu: Add support for NOR flash device on Armada XP-GP board')
Cc: stable@vger.kernel.org # v3.10+
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll

commit c98235cb8584a72e95786e17d695a8e5fafcd766 upstream.

The mlx4 driver is triggering schedules while atomic inside
mlx4_en_netpoll:

spin_lock_irqsave(&cq->lock, flags);
napi_synchronize(&cq->napi);
^^^^^ msleep here
mlx4_en_process_rx_cq(dev, cq, 0);
spin_unlock_irqrestore(&cq->lock, flags);

This was part of a patch by Alexander Guller from Mellanox in 2011,
but it still isn't upstream.

Signed-off-by: Chris Mason <clm@fb.com>
Acked-By: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Masoud Sharbiani <msharbiani@twitter.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs,userns: Change inode_capable to capable_wrt_inode_uidgid

commit 23adbe12ef7d3d4195e80800ab36b37bee28cd03 upstream.

The kernel has no concept of capabilities with respect to inodes; inodes
exist independently of namespaces.  For example, inode_capable(inode,
CAP_LINUX_IMMUTABLE) would be nonsense.

This patch changes inode_capable to check for uid and gid mappings and
renames it to capable_wrt_inode_uidgid, which should make it more
obvious what it does.

Fixes CVE-2014-4014.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.43

netfilter: Fix potential use after free in ip6_route_me_harder()

commit a8951d5814e1373807a94f79f7ccec7041325470 upstream.

Dst is released one line before we access it again with dst->error.

Fixes: 58e35d147128 netfilter: ipv6: propagate routing errors from
ip6_route_me_harder()

Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: perf: hook up perf_sample_event_took around pmu irq handling

commit 5f5092e72cc25a6a5785308270e0085b2b2772cc upstream.

Since we indirect all of our PMU IRQ handling through a dispatcher, it's
trivial to hook up perf_sample_event_took to prevent applications such
as oprofile from generating interrupt storms due to an unrealisticly
low sample period.

Reported-by: Robert Richter <rric@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Enforce 1 as lower limit for perf_event_max_sample_rate

commit 723478c8a471403c53cf144999701f6e0c4bbd11 upstream.

/proc/sys/kernel/perf_event_max_sample_rate will accept
negative values as well as 0.

Negative values are unreasonable, and 0 causes a
divide by zero exception in perf_proc_update_handler.

This patch enforces a lower limit of 1.

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5242DB0C.4070005@t-online.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix interrupt handler timing harness

commit e5302920da9ef23f9d19d4e9ac85704cc25bee7a upstream.

This patch fixes a serious bug in:

  14c63f17b1fd perf: Drop sample rate when sampling is too slow

There was an misunderstanding on the API of the do_div()
macro. It returns the remainder of the division and this
was not what the function expected leading to disabling the
interrupt latency watchdog.

This patch also remove a duplicate assignment in
perf_sample_event_took().

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: dave.hansen@linux.intel.com
Cc: ak@linux.intel.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/20130704223010.GA30625@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Drop sample rate when sampling is too slow

commit 14c63f17b1fde5a575a28e96547a22b451c71fb5 upstream.

This patch keeps track of how long perf's NMI handler is taking,
and also calculates how many samples perf can take a second.  If
the sample length times the expected max number of samples
exceeds a configurable threshold, it drops the sample rate.

This way, we don't have a runaway sampling process eating up the
CPU.

This patch can tend to drop the sample rate down to level where
perf doesn't work very well.  *BUT* the alternative is that my
system hangs because it spends all of its time handling NMIs.

I'll take a busted performance tool over an entire system that's
busted and undebuggable any day.

BTW, my suspicion is that there's still an underlying bug here.
Using the HPET instead of the TSC is definitely a contributing
factor, but I suspect there are some other things going on.
But, I can't go dig down on a bug like that with my machine
hanging all the time.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
[ Prettified it a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser-target: Add missing target_put_sess_cmd for ImmedateData failure

commit 6cc44a6fb46e1ecc1c28125aa8fa34d317aa9ea7 upstream.

This patch addresses a bug where an early exception for SCSI WRITE
with ImmediateData=Yes was missing the target_put_sess_cmd() call
to drop the extra se_cmd->cmd_kref reference obtained during the
normal iscsit_setup_scsi_cmd() codepath execution.

This bug was manifesting itself during session shutdown within
isert_cq_rx_comp_err() where target_wait_for_sess_cmds() would
end up waiting indefinately for the last se_cmd->cmd_kref put to
occur for the failed SCSI WRITE + ImmediateData descriptors.

This fix follows what traditional iscsi-target code already does
for the same failure case within iscsit_get_immediate_data().

Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Cc: Sagi Grimberg <sagig@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: rmap: fix use-after-free in __put_anon_vma

commit 624483f3ea82598ab0f62f1bdb9177f531ab1892 upstream.

While working address sanitizer for kernel I've discovered
use-after-free bug in __put_anon_vma.

For the last anon_vma, anon_vma->root freed before child anon_vma.
Later in anon_vma_free(anon_vma) we are referencing to already freed
anon_vma->root to check rwsem.

This fixes it by freeing the child anon_vma before freeing
anon_vma->root.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Avoid runtime suspend loops for HCDs that can't handle suspend/resume

commit 8ef42ddd9a53b73e6fc3934278710c27f80f324f upstream.

Not all host controller drivers have bus-suspend and bus-resume
methods.  When one doesn't, it will cause problems if runtime PM is
enabled in the kernel.  The PM core will attempt to suspend the
controller's root hub, the suspend will fail because there is no
bus-suspend routine, and a -EBUSY error code will be returned to the
PM core.  This will cause the suspend attempt to be repeated shortly
thereafter, in a never-ending loop.

Part of the problem is that the original error code -ENOENT gets
changed to -EBUSY in usb_runtime_suspend(), on the grounds that the PM
core will interpret -ENOENT as meaning that the root hub has gotten
into a runtime-PM error state.  While this change is appropriate for
real USB devices, it's not such a good idea for a root hub.  In fact,
considering the root hub to be in a runtime-PM error state would not
be far from the truth.  Therefore this patch updates
usb_runtime_suspend() so that it adjusts error codes only for
non-root-hub devices.

Furthermore, the patch attempts to prevent the problem from occurring
in the first place by not enabling runtime PM by default for root hubs
whose host controller driver doesn't have bus_suspend and bus_resume
methods.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: io_ti: fix firmware download on big-endian machines (part 2)

commit c03890ff5e24a4bf59059f2d179f427559b7330a upstream.

A recent patch that purported to fix firmware download on big-endian
machines failed to add the corresponding sparse annotation to the
i2c-header. This was reported by the kbuild test robot.

Adding the appropriate annotation revealed another endianess bug related
to the i2c-header Size-field in a code path that is exercised when the
firmware is actually being downloaded (and not just verified and left
untouched unless older than the firmware at hand).

This patch adds the required sparse annotation to the i2c-header and
makes sure that the Size-field is sent in little-endian byte order
during firmware download also on big-endian machines.

Note that this patch is only compile-tested, but that there is no
functional change for little-endian systems.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Ludovic Drolez <ldrolez@debian.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Novatel E371 PCIe card

commit 8a61ba3a47ac39f660702aa66a172185dd605a86 upstream.

Adds product ID for the Novatel E371 PCI Express Mini Card.

$ lsusb
Bus 001 Device 024: ID 1410:9011 Novatel Wireless

$ usb-devices
T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 24 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1410 ProdID=9011 Rev=00.03
S:  Manufacturer=Novatel Wireless, Inc.
S:  Product=Novatel Wireless HSPA
S:  SerialNumber=012773002115811
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Tested with kernel 3.2.0.

Signed-off-by: Alexej Starschenko <starschenko@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-wdm: properly include types.h

commit 7ac3764fcafc06e72e1a79a9d998b9fdd900b2a6 upstream.

The file include/uapi/linux/usb/cdc-wdm.h uses a __u16 so it needs to
include types.h as well to make the build system happy.

Fixes: 3edce1cf813a ("USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND")
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-wdm: export cdc-wdm uapi header

commit 7d1896360f4d055d68565ef8ed56a677580f1a39 upstream.

The include/uapi/linux/usb/cdc-wdm.h header defines cdc-wdm
userspace APIs and should be exported by make headers_install.

Fixes: 3edce1cf813a ("USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: add NovaTech OrionLXm product ID

commit d0839d757e6294921c31b1c4ca4f1dcc5df63bcd upstream.

The NovaTech OrionLXm uses an onboard FTDI serial converter for JTAG and
console access.

Here is the lsusb output:
Bus 004 Device 123: ID 0403:7c90 Future Technology Devices
International, Ltd

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup

commit 192a98e280e560510a62aca8cfa83b4ae7c095bb upstream.

The conversion to a fixup table for Replacer model with ALC260 in
commit 20f7d928 took the wrong widget NID for COEF setups.  Namely,
NID 0x1a should have been used instead of NID 0x20, which is the
common node for all Realtek codecs but ALC260.

Fixes: 20f7d928fa6e ('ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop

commit e30cf2d2bed3aed74a651c64de323ba26e4ff7d0 upstream.

Correcion of wrong fixup entries add in commit ca8f0424 to replace
static model quirk for PB V7900 laptop (will model).

[note: the removal of ALC260_FIXUP_HP_PIN_0F chain is also needed as a
 part of the fix; otherwise the pin is set up wrongly as a headphone,
 and user-space (PulseAudio) may be wrongly trying to detect the jack
 state -- tiwai]

Fixes: ca8f04247eaa ('ALSA: hda/realtek - Add the fixup codes for ALC260 model=will')
Signed-off-by: Ronan Marquet <ronan.marquet@orange.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: add mux settling delay

commit ffed54dced86723f352323f15789d9ad6bee25e1 upstream.

I got a patch from the original author, Fred Brooks, to add a small
settling delay after setting the AI channel multiplexor.  The lack of
delay resulted in unstable or scrambled data on faster processors.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Fred Brooks <nsaspook@nsaspook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: Move pasting into a work item

commit d7500135802ca55b3f4e01a16544e8b34082f8c3 upstream.

Input is handled in softirq context, but when pasting we may
need to sleep.  speakup_paste_selection() currently tries to
bodge this by busy-waiting if in_atomic(), but that doesn't
help because the ldisc may also sleep.

For bonus breakage, speakup_paste_selection() changes the
state of current, even though it's not running in process
context.

Move it into a work item and make sure to cancel it on exit.

References: https://bugs.debian.org/735202
References: https://bugs.debian.org/744015
Reported-by: Paul Gevers <elbrus@debian.org>
Reported-and-tested-by: Jarek Czekalski <jarekczek@poczta.onet.pl>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: delete endpoints from bandwidth list before freeing whole device

commit 5dc2808c4729bf080487e61b80ee04e0fdb12a37 upstream.

Lists of endpoints are stored for bandwidth calculation for roothub ports.
Make sure we remove all endpoints from the list before the whole device,
containing its endpoints list_head stuctures, is freed.

This used to be done in the wrong order in xhci_mem_cleanup(),
and triggered an oops in resume from S4 (hibernate).

Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: always set MD_RECOVERY_INTR when interrupting a reshape thread.

commit 2ac295a544dcae9299cba13ce250419117ae7fd1 upstream.

Commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97
   md: fix problem when adding device to read-only array with bitmap.

added a called to md_reap_sync_thread() which cause a reshape thread
to be interrupted (in particular, it could cause md_thread() to never even
call md_do_sync()).
However it didn't set MD_RECOVERY_INTR so ->finish_reshape() would not
know that the reshape didn't complete.

This only happens when mddev->ro is set and normally reshape threads
don't run in that situation.  But raid5 and raid10 can start a reshape
thread during "run" is the array is in the middle of a reshape.
They do this even if ->ro is set.

So it is best to set MD_RECOVERY_INTR before abortingg the
sync thread, just in case.

Though it rare for this to trigger a problem it can cause data corruption
because the reshape isn't finished properly.
So it is suitable for any stable which the offending commit was applied to.
(3.2 or later)

Fixes: 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".

commit 3991b31ea072b070081ca3bfa860a077eda67de5 upstream.

If mddev->ro is set, md_to_sync will (correctly) abort.
However in that case MD_RECOVERY_INTR isn't set.

If a RESHAPE had been requested, then ->finish_reshape() will be
called and it will think the reshape was successful even though
nothing happened.

Normally a resync will not be requested if ->ro is set, but if an
array is stopped while a reshape is on-going, then when the array is
started, the reshape will be restarted.  If the array is also set
read-only at this point, the reshape will instantly appear to success,
resulting in data corruption.

Consequently, this patch is suitable for any -stable kernel.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Only copy back the modified fields to userspace from execbuffer

commit 9aab8bff7aa3bee567213ad3c1fdfb217bb980a2 upstream.

We only want to modifiy a single field in the userspace view of the
execbuffer command buffer, so explicitly change that rather than copy
everything back again.

This serves two purposes:

1. The single fields are much cheaper to copy (constant size so the
copy uses special case code) and much smaller than the whole array.

2. We modify the array for internal use that need to be masked from
the user.

Note: We need this backported since without it the next bugfix will
blow up when userspace recycles batchbuffers and relocations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Fix hotplug vs. set_cpus_allowed_ptr()

commit 6acbfb96976fc3350e30d964acb1dbbdf876d55e upstream.

Lai found that:

  WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b()
  ...
  migration_cpu_stop+0x1d/0x22

was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is
always a sub-set of cpu_online_mask.

This isn't true since 5fbd036b552f ("sched: Cleanup cpu_active madness").

So set active and online at the same time to avoid this particular
problem.

Fixes: 5fbd036b552f ("sched: Cleanup cpu_active madness")
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: always split discards on cache block boundaries

commit f1daa838e861ae1a0fb7cd9721a21258430fcc8c upstream.

The DM cache target cannot cope with discards that span multiple cache
blocks, so each discard bio that spans more than one cache block must
get split by the DM core.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8051/1: put_user: fix possible data corruption in put_user

commit 537094b64b229bf3ad146042f83e74cf6abe59df upstream.

According to arm procedure call standart r2 register is call-cloberred.
So after the result of x expression was put into r2 any following
function call in p may overwrite r2. To fix this, the result of p
expression must be saved to the temporary variable before the
assigment x expression to __r2.

Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled

commit 4b353a706a86598ba47307c47301c3c428b79e09 upstream.

On OMAP4 panda board, there have been several bug reports about boot
hang and lock-ups with CPU_IDLE enabled. The root cause of the issue
is missing interrupts while in idle state. Commit cb7094e8 {cpuidle / omap4 :
use CPUIDLE_FLAG_TIMER_STOP flag} moved the broadcast notifiers to common
code for right reasons but on OMAP4 which suffers from a nasty ROM code
bug with GIC, commit ff999b8a {ARM: OMAP4460: Workaround for ROM bug ..},
we loose interrupts which leads to issues like lock-up, hangs etc.

Patch reverts commit cb7094 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP
flag} and 54769d6 {cpuidle: OMAP4: remove timer broadcast initialization} to
avoid the issue. With this change, OMAP4 panda boards, the mentioned
issues are getting fixed. We no longer loose interrupts which was the cause
of the regression.

Fixes: cb7094e8 (cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag)
Fixes: ff999b8a (cpuidle: OMAP4: remove timer broadcast initialization)
Cc: Roger Quadros <rogerq@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-tested-by: Roger Quadros <rogerq@ti.com>
Reported-tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on all OMAP3 platforms

commit 98d7e1aee6dd534f468993f8c6a1bc730d4cfa81 upstream.

Commit 7b2e1277598e4187c9be3e61fd9b0f0423f97986 ("ARM: OMAP3: clock:
Back-propagate rate change from cam_mclk to dpll4_m5") enabled clock
rate back-propagation from cam_mclk do dpll4_m5 on OMAP3630 only.
Perform back-propagation on other OMAP3 platforms as well.

Reported-by: Jean-Philippe François <jp.francois@cynove.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx: fix error handling in ipu device registration

commit d1d70e5dc2cfa9047bb935c41ba808ebb8135696 upstream.

If we fail to allocate struct platform_device pdev we
dereference it after the goto label err.

This bug was found using coccinelle.

Fixes: afa77ef (ARM: mx3: dynamically allocate "ipu-core" devices)
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: handle non-VGA class pci devices with ATRM

commit d8ade3526b2aa0505132c404c05a38b73ea15490 upstream.

Newer PX systems have non-VGA pci class dGPUs.  Update
the ATRM fetch method to handle those cases.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=75401

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: also try GART for CPU accessed buffers

commit 544092596e8ac269f70e70961b5e9381909c9b1e upstream.

Placing them exclusively into VRAM might not work all the time.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setup

commit 0f1d360b2ee3a2a0f510d3f1bcd3f5ebe5d41265 upstream.

Fixes a LVDS bleed issue on Lenovo W530 that can occur under a
number of circumstances.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ntc_thermistor) Fix OF device ID mapping

commit ead82d6792ef5c600d535bca6ec50a4da14ff7c7 upstream.

The mapping from OF device IDs to platform device IDs is wrong.
TYPE_NCPXXWB473 is 0, TYPE_NCPXXWL333 is 1, so
ntc_thermistor_id[TYPE_NCPXXWB473] is { "ncp15wb473", TYPE_NCPXXWB473 }
while
ntc_thermistor_id[TYPE_NCPXXWL333] is { "ncp18wb473", TYPE_NCPXXWB473 }.

So the name is wrong for all but the "ntc,ncp15wb473" entry, and the
type is wrong for the "ntc,ncp15wl333" entry.

So map the entries by index, it is neither elegant nor robust but at
least it is correct.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ntc_thermistor) Fix dependencies

commit 59cf4243e557aa64ab2ef51280454aa1f3828e14 upstream.

In commit 9e8269de, support was added for ntc_thermistor devices being
declared in the device tree and implemented on top of IIO. With that
change, a dependency was added to the ntc_thermistor driver:

depends on (!OF && !IIO) || (OF && IIO)

This construct has the drawback that the driver can no longer be
selected when OF is set and IIO isn't, nor when IIO is set and OF is
not. This is a regression for the original users of the driver.

As the new code depends on IIO and is useless without OF, include it
only if both are enabled, and set the dependencies accordingly. This
is clearer, more simple and more correct.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: fix DOCBOOKS=... building

commit e60cbeedc48d80689c249ab5dcc3c31ad0452dea upstream.

Prior to commit 4266129964b8 ("[media] DocBook: Move all media docbook
stuff into its own directory") it was possible to build only a single
(or more) book(s) by calling, for example

    make htmldocs DOCBOOKS=80211.xml

This now fails:

    cp: target `.../Documentation/DocBook//media_api' is not a directory

Ignore errors from that copy to make this possible again.

Fixes: 4266129964b8 ("[media] DocBook: Move all media docbook stuff into its own directory")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory-failure.c: fix memory leak by race between poison and unpoison

commit 3e030ecc0fc7de10fd0da10c1c19939872a31717 upstream.

When a memory error happens on an in-use page or (free and in-use)
hugepage, the victim page is isolated with its refcount set to one.

When you try to unpoison it later, unpoison_memory() calls put_page()
for it twice in order to bring the page back to free page pool (buddy or
free hugepage list).  However, if another memory error occurs on the
page which we are unpoisoning, memory_failure() returns without
releasing the refcount which was incremented in the same call at first,
which results in memory leak and unconsistent num_poisoned_pages
statistics.  This patch fixes it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf evsel: Fix printing of perf_event_paranoid message

commit b69e63a45f2d96a0dfe930ed20385058d4574d2f upstream.

message is currently shown as:

  Error:
  You may not have permission to collect %sstats.
  Consider tweaking /proc/sys/kernel/perf_event_paranoid:

Note the %sstats. With patch this becomes:

  Error:
  You may not have permission to collect stats.
  Consider tweaking /proc/sys/kernel/perf_event_paranoid:

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1369526040-1368-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix race in removing an event

commit 46ce0fe97a6be7532ce6126bb26ce89fed81528c upstream.

When removing a (sibling) event we do:

raw_spin_lock_irq(&ctx->lock);
perf_group_detach(event);
raw_spin_unlock_irq(&ctx->lock);

<hole>

perf_remove_from_context(event);
raw_spin_lock_irq(&ctx->lock);
...
raw_spin_unlock_irq(&ctx->lock);

Now, assuming the event is a sibling, it will be 'unreachable' for
things like ctx_sched_out() because that iterates the
groups->siblings, and we just unhooked the sibling.

So, if during <hole> we get ctx_sched_out(), it will miss the event
and not call event_sched_out() on it, leaving it programmed on the
PMU.

The subsequent perf_remove_from_context() call will find the ctx is
inactive and only call list_del_event() to remove the event from all
other lists.

Hereafter we can proceed to free the event; while still programmed!

Close this hole by moving perf_group_detach() inside the same
ctx->lock region(s) perf_remove_from_context() has.

The condition on inherited events only in __perf_event_exit_task() is
likely complete crap because non-inherited events are part of groups
too and we're tearing down just the same. But leave that for another
patch.

Most-likely-Fixes: e03a9a55b4e ("perf: Change close() semantics for group events")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Much-staring-at-traces-by: Vince Weaver <vincent.weaver@maine.edu>
Much-staring-at-traces-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140505093124.GN17778@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Limit perf_event_attr::sample_period to 63 bits

commit 0819b2e30ccb93edf04876237b6205eef84ec8d2 upstream.

Vince reported that using a large sample_period (one with bit 63 set)
results in wreckage since while the sample_period is fundamentally
unsigned (negative periods don't make sense) the way we implement
things very much rely on signed logic.

So limit sample_period to 63 bits to avoid tripping over this.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-p25fhunibl4y3qi0zuqmyf4b@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Prevent false warning in perf_swevent_add

commit 39af6b1678afa5880dda7e375cf3f9d395087f6d upstream.

The perf cpu offline callback takes down all cpu context
events and releases swhash->swevent_hlist.

This could race with task context software event being just
scheduled on this cpu via perf_swevent_add while cpu hotplug
code already cleaned up event's data.

The race happens in the gap between the cpu notifier code
and the cpu being actually taken down. Note that only cpu
ctx events are terminated in the perf cpu hotplug code.

It's easily reproduced with:
  $ perf record -e faults perf bench sched pipe

while putting one of the cpus offline:
  # echo 0 > /sys/devices/system/cpu/cpu1/online

Console emits following warning:
  WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0()
  Modules linked in:
  CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G        W    3.14.0+ #256
  Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008
   0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005
   0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046
   ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001
  Call Trace:
   [<ffffffff81665a23>] dump_stack+0x4f/0x7c
   [<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0
   [<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20
   [<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0
   [<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0
   [<ffffffff8111646a>] group_sched_in+0x6a/0x1f0
   [<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0
   [<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450
   [<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0
   [<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0
   [<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460
   [<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30
   [<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100
   [<ffffffff8166a7de>] __schedule+0x30e/0xad0
   [<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560
   [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
   [<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
   [<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70
   [<ffffffff816707f0>] retint_kernel+0x20/0x30
   [<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90
   [<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67
   [<ffffffff81679321>] ? sysret_check+0x5/0x56

Fixing this by tracking the cpu hotplug state and displaying
the WARN only if current cpu is initialized properly.

Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1396861448-10097-1-git-send-email-jolsa@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Sanitize irq accounting madness

commit 2d513868e2a33e1d5315490ef4c861ee65babd65 upstream.

Russell reported, that irqtime_account_idle_ticks() takes ages due to:

       for (i = 0; i < ticks; i++)
               irqtime_account_process_tick(current, 0, rq);

It's sad, that this code was written way _AFTER_ the NOHZ idle
functionality was available. I charge myself guitly for not paying
attention when that crap got merged with commit abb74cefa ("sched:
Export ns irqtimes through /proc/stat")

So instead of looping nr_ticks times just apply the whole thing at
once.

As a side note: The whole cputime_t vs. u64 business in that context
wants to be cleaned up as well. There is no point in having all these
back and forth conversions. Lets standardise on u64 nsec for all
kernel internal accounting and be done with it. Everything else does
not make sense at all for fine grained accounting. Frederic, can you
please take care of that?

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Shaun Ruffell <sruffell@digium.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1405022307000.6261@ionos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check

commit 6227cb00cc120f9a43ce8313bb0475ddabcb7d01 upstream.

The check at the beginning of cpupri_find() makes sure that the task_pri
variable does not exceed the cp->pri_to_cpu array length. But that length
is CPUPRI_NR_PRIORITIES not MAX_RT_PRIO, where it will miss the last two
priorities in that array.

As task_pri is computed from convert_prio() which should never be bigger
than CPUPRI_NR_PRIORITIES, if the check should cause a panic if it is
hit.

Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1397015410.5212.13.camel@marge.simpson.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.42

futex: Make lookup_pi_state more robust

commit 54a217887a7b658e2650c3feff22756ab80c7339 upstream.

The current implementation of lookup_pi_state has ambigous handling of
the TID value 0 in the user space futex.  We can get into the kernel
even if the TID value is 0, because either there is a stale waiters bit
or the owner died bit is set or we are called from the requeue_pi path
or from user space just for fun.

The current code avoids an explicit sanity check for pid = 0 in case
that kernel internal state (waiters) are found for the user space
address.  This can lead to state leakage and worse under some
circumstances.

Handle the cases explicit:

       Waiter | pi_state | pi->owner | uTID      | uODIED | ?

  [1]  NULL   | ---      | ---       | 0         | 0/1    | Valid
  [2]  NULL   | ---      | ---       | >0        | 0/1    | Valid

  [3]  Found  | NULL     | --        | Any       | 0/1    | Invalid

  [4]  Found  | Found    | NULL      | 0         | 1      | Valid
  [5]  Found  | Found    | NULL      | >0        | 1      | Invalid

  [6]  Found  | Found    | task      | 0         | 1      | Valid

  [7]  Found  | Found    | NULL      | Any       | 0      | Invalid

  [8]  Found  | Found    | task      | ==taskTID | 0/1    | Valid
  [9]  Found  | Found    | task      | 0         | 0      | Invalid
  [10] Found  | Found    | task      | !=taskTID | 0/1    | Invalid

 [1] Indicates that the kernel can acquire the futex atomically. We
     came came here due to a stale FUTEX_WAITERS/FUTEX_OWNER_DIED bit.

 [2] Valid, if TID does not belong to a kernel thread. If no matching
     thread is found then it indicates that the owner TID has died.

 [3] Invalid. The waiter is queued on a non PI futex

 [4] Valid state after exit_robust_list(), which sets the user space
     value to FUTEX_WAITERS | FUTEX_OWNER_DIED.

 [5] The user space value got manipulated between exit_robust_list()
     and exit_pi_state_list()

 [6] Valid state after exit_pi_state_list() which sets the new owner in
     the pi_state but cannot access the user space value.

 [7] pi_state->owner can only be NULL when the OWNER_DIED bit is set.

 [8] Owner and user space value match

 [9] There is no transient state which sets the user space TID to 0
     except exit_robust_list(), but this is indicated by the
     FUTEX_OWNER_DIED bit. See [4]

[10] There is no transient state which leaves owner and user space
     TID out of sync.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Always cleanup owner tid in unlock_pi

commit 13fbca4c6ecd96ec1a1cfa2e4f2ce191fe928a5e upstream.

If the owner died bit is set at futex_unlock_pi, we currently do not
cleanup the user space futex.  So the owner TID of the current owner
(the unlocker) persists.  That's observable inconsistant state,
especially when the ownership of the pi state got transferred.

Clean it up unconditionally.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Validate atomic acquisition in futex_lock_pi_atomic()

commit b3eaa9fc5cd0a4d74b18f6b8dc617aeaf1873270 upstream.

We need to protect the atomic acquisition in the kernel against rogue
user space which sets the user space futex to 0, so the kernel side
acquisition succeeds while there is existing state in the kernel
associated to the real owner.

Verify whether the futex has waiters associated with kernel state.  If
it has, return -EINVAL.  The state is corrupted already, so no point in
cleaning it up.  Subsequent calls will fail as well.  Not our problem.

[ tglx: Use futex_top_waiter() and explain why we do not need to try
   restoring the already corrupted user space state. ]

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex-prevent-requeue-pi-on-same-futex.patch futex: Forbid uaddr == uaddr2 in futex_requeue(..., requeue_pi=1)

commit e9c243a5a6de0be8e584c604d353412584b592f8 upstream.

If uaddr == uaddr2, then we have broken the rule of only requeueing from
a non-pi futex to a pi futex with this call.  If we attempt this, then
dangling pointers may be left for rt_waiter resulting in an exploitable
condition.

This change brings futex_requeue() in line with futex_wait_requeue_pi()
which performs the same check as per commit 6f7b0a2a5c0f ("futex: Forbid
uaddr == uaddr2 in futex_wait_requeue_pi()")

[ tglx: Compare the resulting keys as well, as uaddrs might be
   different depending on the mapping ]

Fixes CVE-2014-3153.

Reported-by: Pinkie Pie
Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: protect tid->sched check

[ Upstream commit 21f8aaee0c62708654988ce092838aa7df4d25d8 ]

We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That
is race condition which can result of doing list_del(&tid->list) twice
(second time with poisoned list node) and cause crash like shown below:

[424271.637220] BUG: unable to handle kernel paging request at 00100104
[424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k]
...
[424271.639953] Call Trace:
[424271.639998]  [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k]
[424271.640083]  [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k]
[424271.640177]  [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211]
[424271.640258]  [<c10f730e>] ? free_compound_page+0x2e/0x40
[424271.640346]  [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211]
[424271.640437]  [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0
[424271.640510]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640578]  [<c10fc23c>] ? put_page+0x2c/0x40
[424271.640640]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640706]  [<c1345a84>] ? kfree_skbmem+0x34/0x90
[424271.640787]  [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211]
[424271.640897]  [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211]
[424271.641009]  [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211]
[424271.641104]  [<c13846ce>] ? ip_output+0x7e/0xd0
[424271.641182]  [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211]
[424271.641266]  [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k]
[424271.641358]  [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211]
[424271.641445]  [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k]

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=70551

Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[ xl: backported to 3.10: adjusted context ]
Signed-off-by: Xiangyu Lu <luxiangyu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode

commit 97d9d23dda6f37d90aefeec4ed619d52df525382 upstream.

If a struct contains 64-bit fields, it is aligned on 64-bit boundaries
within containing structs in 64-bit compilations. This is the case with
struct v4l2_window, which contains pointers and is embedded into struct
v4l2_format, and that one is embedded into struct v4l2_create_buffers.
Unlike some other structs, used as a part of the kernel ABI as ioctl()
arguments, that are packed, these structs aren't packed. This isn't a
problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains
a bug, that triggers in such 64-bit builds. That code wrongly assumes,
that in struct v4l2_create_buffers, struct v4l2_format immediately follows
the __u32 memory field, which in fact isn't the case. This bug wasn't
visible until now, because until recently hardly any applications used
this ioctl() and mostly embedded 32-bit only drivers implemented it. This
is changing now with addition of this ioctl() to some USB drivers, e.g.
UVC. This patch fixes the bug by copying parts of struct
v4l2_create_buffers separately.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space

commit cfece5857ca51d1dcdb157017aba226f594e9dcf upstream.

Commit 75e2bdad8901a0b599e01a96229be922eef1e488 "ov7670: allow
configuration of image size, clock speed, and I/O method" uses a wrong
index to iterate an array. Apart from being wrong, it also uses an
unchecked value from user-space, which can cause access to unmapped
memory in the kernel, triggered by a normal desktop user with rights to
use V4L2 devices.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: fc2580: fix tuning failure on 32-bit arch

commit 8845cc6415ec28ef8d57b3fb81c75ef9bce69c5f upstream.

There was some frequency calculation overflows which caused tuning
failure on 32-bit architecture. Use 64-bit numbers where needed in
order to avoid calculation overflows.

Thanks for the Finnish person, who asked remain anonymous, reporting,
testing and suggesting the fix.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix interrupt remapping for aliased devices

commit e028a9e6b8a637af09ac4114083280df4a7045f1 upstream.

An apparent cut and paste error prevents the correct flags from being
set on the alias device resulting in MSI on conventional PCI devices
failing to work.  This also produces error events from the IOMMU like:

AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:14.4 address=0x000000fdf8000000 flags=0x0a00]

Where 14.4 is a PCIe-to-PCI bridge with a device behind it trying to
use MSI interrupts.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: fix corruption when using page_count 0 page in rbd

commit 178eda29ca721842f2146378e73d43e0044c4166 upstream.

It has been reported that using ZFSonLinux on rbd will result in memory
corruption. The bug report can be found here:

https://github.com/zfsonlinux/spl/issues/241
http://tracker.ceph.com/issues/7790

The reason is that ZFS will send pages with page_count 0 into rbd, which in
turns send them to tcp_sendpage. However, tcp_sendpage cannot deal with
page_count 0, as it will do get_page and put_page, and erroneously free the
page.

This type of issue has been noted before, and handled in iscsi, drbd,
etc. So, rbd should also handle this. This fix address this issue by fall back
to slower sendmsg when page_count 0 detected.

Cc: Sage Weil <sage@inktank.com>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix 64 bit builds with binutils 2.24

commit 7998eb3dc700aaf499f93f50b3d77da834ef9e1d upstream.

With binutils 2.24, various 64 bit builds fail with relocation errors
such as

arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
(.text+0x165ee): relocation truncated to fit: R_PPC64_ADDR16_HI
against symbol `interrupt_base_book3e' defined in .text section
in arch/powerpc/kernel/built-in.o
arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
(.text+0x16602): relocation truncated to fit: R_PPC64_ADDR16_HI
against symbol `interrupt_end_book3e' defined in .text section
in arch/powerpc/kernel/built-in.o

The assembler maintainer says:

 I changed the ABI, something that had to be done but unfortunately
 happens to break the booke kernel code.  When building up a 64-bit
 value with lis, ori, shl, oris, ori or similar sequences, you now
 should use @high and @higha in place of @h and @ha.  @h and @ha
 (and their associated relocs R_PPC64_ADDR16_HI and R_PPC64_ADDR16_HA)
 now report overflow if the value is out of 32-bit signed range.
 ie. @h and @ha assume you're building a 32-bit value. This is needed
 to report out-of-range -mcmodel=medium toc pointer offsets in @toc@h
 and @toc@ha expressions, and for consistency I did the same for all
 other @h and @ha relocs.

Replacing @h with @high in one strategic location fixes the relocation
errors. This has to be done conditionally since the assembler either
supports @h or @high but not both.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: s390 - fix aes,des ctr mode concurrency finding.

commit 3901c1124ec5099254a9396085f7798153a7293f upstream.

An additional testcase found an issue with the last
series of patches applied: the fallback solution may
not save the iv value after operation. This very small
fix just makes sure the iv is copied back to the
walk/desc struct.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - add allocation failure handling in SPRINTFCAT macro

commit 27c5fb7a84242b66bf1e0b2fe6bf40d19bcc5c04 upstream.

GFP_ATOMIC memory allocation could fail.
In this case, avoid NULL pointer dereference and notify user.

Cc: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: s3c2410: resume race fix

commit ce78cc071f5f541480e381cc0241d37590041a9d upstream.

Don't unmark the device as suspended until after it's been re-setup.

The main race would be w.r.t. an i2c driver that gets resumed at the same
time (asyncronously), that is allowed to do a transfer since suspended
is set to 0 before reinit, but really should have seen the -EIO return
instead.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: designware: Mask all interrupts during i2c controller enable

commit 47bb27e78867997040a228328f2a631c3c7f2c82 upstream.

There have been "i2c_designware 80860F41:00: controller timed out" errors
on a number of Baytrail platforms. The issue is caused by incorrect value in
Interrupt Mask Register (DW_IC_INTR_MASK)  when i2c core is being enabled.
This causes call to __i2c_dw_enable() to immediately start the transfer which
leads to timeout. There are 3 failure modes observed:

1. Failure in S0 to S3 resume path

The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start
the first transaction after resuming from system sleep, TX_EMPTY interrupt
is already unmasked because of the hardware default.

2. Failure in normal operational path

This failure happens rarely and is hard to reproduce. Debug trace showed that
DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant
TX_EMPTY was unmasked.

3. Failure in S3 to S0 suspend path

This failure also happens rarely and is hard to reproduce. Adding debug trace
that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR
call trace we could conclude TX_EMPTY was unmasked when problem occurred.

The patch masks all interrupts before the controller is enabled to resolve the
faulty DW_IC_INTR_MASK conditions.

Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: improved the comment and removed typo in commit msg]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: bail out on zero length transfers

commit d7653964c590ba846aa11a8f6edf409773cbc492 upstream.

This hardware does not support zero length transfers. Instead, the
driver does one (random) byte transfers currently with undefined results
for the slaves. We now bail out.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX

commit f6e6e1b9fee88c90586787b71dc49bb3ce62bb89 upstream.

Without this this EEE PC exports a non working WMI interface, with this it
exports a working "good old" eeepc_laptop interface, fixing brightness control
not working as well as rfkill being stuck in a permanent wireless blocked
state.

This is not an ideal way to fix this, but various attempts to fix this
otherwise have failed, see:

References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181
Reported-and-tested-by: lou.cardone@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: clean up ZPODD when a port is detached

commit a6f9bf4d2f965b862b95213303d154e02957eed8 upstream.

When a ZPODD device is unbound via sysfs, the ACPI notify handler
is not removed. This causes panics as observed in Bug #74601. The
panic only happens when the wake happens from outside the kernel
(i.e. inserting a media or pressing a button). Add a loop to
ata_port_detach which loops through the port's devices and checks
if zpodd is enabled, if so call zpodd_exit.

Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: fix cpu hotplug crash by removing per-cpu structure

commit 610f2de3559c383caf8fbbf91e9968102dff7ca0 upstream.

The DM crypt target used per-cpu structures to hold pointers to a
ablkcipher_request structure.  The code assumed that the work item keeps
executing on a single CPU, so it didn't use synchronization when
accessing this structure.

If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online,
the work item could be moved to another CPU.  This causes dm-crypt
crashes, like the following, because the code starts using an incorrect
ablkcipher_request:

 smpboot: CPU 7 is now offline
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000130
 IP: [<ffffffffa1862b3d>] crypt_convert+0x12d/0x3c0 [dm_crypt]
 ...
 Call Trace:
  [<ffffffffa1864415>] ? kcryptd_crypt+0x305/0x470 [dm_crypt]
  [<ffffffff81062060>] ? finish_task_switch+0x40/0xc0
  [<ffffffff81052a28>] ? process_one_work+0x168/0x470
  [<ffffffff8105366b>] ? worker_thread+0x10b/0x390
  [<ffffffff81053560>] ? manage_workers.isra.26+0x290/0x290
  [<ffffffff81058d9f>] ? kthread+0xaf/0xc0
  [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120
  [<ffffffff813464ac>] ? ret_from_fork+0x7c/0xb0
  [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120

Fix this bug by removing the per-cpu definition.  The structure
ablkcipher_request is accessed via a pointer from convert_context.
Consequently, if the work item is rescheduled to a different CPU, the
thread still uses the same ablkcipher_request.

This change may undermine performance improvements intended by commit
c0297721 ("dm crypt: scale to multiple cpus") on select hardware.  In
practice no performance difference was observed on recent hardware.  But
regardless, correctness is more important than performance.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix crash when forking inside a transaction

commit 621b5060e823301d0cba4cb52a7ee3491922d291 upstream.

When we fork/clone we currently don't copy any of the TM state to the new
thread.  This results in a TM bad thing (program check) when the new process is
switched in as the kernel does a tmrechkpt with TEXASR FS not set.  Also, since
R1 is from userspace, we trigger the bad kernel stack pointer detection.  So we
end up with something like this:

   Bad kernel stack pointer 0 at c0000000000404fc
   cpu 0x2: Vector: 700 (Program Check) at [c00000003ffefd40]
       pc: c0000000000404fc: restore_gprs+0xc0/0x148
       lr: 0000000000000000
       sp: 0
      msr: 9000000100201030
     current = 0xc000001dd1417c30
     paca    = 0xc00000000fe00800   softe: 0        irq_happened: 0x01
       pid   = 0, comm = swapper/2
   WARNING: exception is not recoverable, can't continue

The below fixes this by flushing the TM state before we copy the task_struct to
the clone.  To do this we go through the tmreclaim patch, which removes the
checkpointed registers from the CPU and transitions the CPU out of TM suspend
mode.  Hence we need to call tmrechkpt after to restore the checkpointed state
and the TM mode for the current task.

To make this fail from userspace is simply:
tbegin
li r0, 2
sc
<boom>

Kudos to Adhemerval Zanella Neto for finding this.

Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: Adhemerval Zanella Neto <azanella@br.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[Backported to 3.10: context adjust]
Signed-off-by: Xue Liu <liuxueliu.liu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Don't allow setting WC emulation if device doesn't support

commit 07b8dae38b09bcfede7e726f172e39b5ce8390d9 upstream.

Just like for pSCSI, if the transport sets get_write_cache, then it is
not valid to enable write cache emulation for it. Return an error.

see https://bugzilla.redhat.com/show_bug.cgi?id=1082675

Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Target/iser: Fix iscsit_accept_np and rdma_cm racy flow

commit 531b7bf4bd795d9a09eac92504322a472c010bc8 upstream.

RDMA CM and iSCSI target flows are asynchronous and completely
uncorrelated. Relying on the fact that iscsi_accept_np will be called
after CM connection request event and will wait for it is a mistake.

When attempting to login to a few targets this flow is racy and
unpredictable, but for parallel login to dozens of targets will
race and hang every time.

The correct synchronizing mechanism in this case is pending on
a semaphore rather than a wait_for_event. We keep the pending
interruptible for iscsi_np cleanup stage.

(Squash patch to remove dead code into parent - nab)

Reported-by: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Target/iser: Fix wrong connection requests list addition

commit 9fe63c88b1d59f1ce054d6948ccd3096496ecedb upstream.

Should be adding list_add_tail($new, $head) and not
the other way around.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: shpchp: Check bridge's secondary (not primary) bus speed

commit 93fa9d32670f5592c8e56abc9928fc194e1e72fc upstream.

When a new device is added below a hotplug bridge, the bridge's secondary
bus speed and the device's bus speed must match.  The shpchp driver
previously checked the bridge's *primary* bus speed, not the secondary bus
speed.

This caused hot-add errors like:

  shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch

Check the secondary bus speed instead.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251
Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core")
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Provide irq_force_affinity fallback for non-SMP

commit 4c88d7f9b0d5fb0588c3386be62115cc2eaa8f9f upstream.

Patch 01f8fa4f01d "genirq: Allow forcing cpu affinity of interrupts" added
an irq_force_affinity() function, and 30ccf03b4a6 "clocksource: Exynos_mct:
Use irq_force_affinity() in cpu bringup" subsequently uses it. However, the
driver can be used with CONFIG_SMP disabled, but the function declaration
is only available for CONFIG_SMP, leading to this build error:

drivers/clocksource/exynos_mct.c:431:3: error: implicit declaration of function 'irq_force_affinity' [-Werror=implicit-function-declaration]
   irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu));

This patch introduces a dummy helper function for the non-SMP case
that always returns success, to get rid of the build error.
Since the patches causing the problem are marked for stable backports,
this one should be as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Link: http://lkml.kernel.org/r/5619084.0zmrrIUZLV@wuerfel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-64, modify_ldt: Make support for 16-bit segments a runtime option

commit fa81511bb0bbb2b1aace3695ce869da9762624ff upstream.

Checkin:

b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

disabled 16-bit segments on 64-bit kernels due to an information
leak.  However, it does seem that people are genuinely using Wine to
run old 16-bit Windows programs on Linux.

A proper fix for this ("espfix64") is coming in the upcoming merge
window, but as a temporary fix, create a sysctl to allow the
administrator to re-enable support for 16-bit segments.

It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If
you hit this issue and care about your old Windows program more than
you care about a kernel stack address information leak, you can do

   echo 1 > /proc/sys/abi/ldt16

as root (add it to your startup scripts), and you should be ok.

The sysctl table is only added if you have COMPAT support enabled on
x86-64, but I assume anybody who runs old windows binaries very much
does that ;)

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag: Reduce maximum stack size to 256MB

commit d71f290b4e98a39f49f2595a13be3b4d5ce8e1f1 upstream.

Specify the maximum stack size for arches where the stack grows upward
(parisc and metag) in asm/processor.h rather than hard coding in
fs/exec.c so that metag can specify a smaller value of 256MB rather than
1GB.

This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased
beyond a safe value by root. E.g. when starting a process after running
"ulimit -H -s unlimited" it will then attempt to use a stack size of the
maximum 1GB which is far too big for metag's limited user virtual
address space (stack_top is usually 0x3ffff000):

BUG: failure at fs/exec.c:589/shift_arg_pages()!

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

metag: fix memory barriers

commit 2425ce84026c385b73ae72039f90d042d49e0394 upstream.

Volatile access doesn't really imply the compiler barrier. Volatile access
is only ordered with respect to other volatile accesses, it isn't ordered
with respect to general memory accesses. Gcc may reorder memory accesses
around volatile access, as we can see in this simple example (if we
compile it with optimization, both increments of *b will be collapsed to
just one):

void fn(volatile int *a, long *b)
{
(*b)++;
*a = 10;
(*b)++;
}

Consequently, we need the compiler barrier after a write to the volatile
variable, to make sure that the compiler doesn't reorder the volatile
write with something else.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile

commit 44330ab516c15dda8a1e660eeaf0003f84e43e3f upstream.

The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.

To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: restore the non-persistent data path

commit bfe11d6de1c416cea4f3f0f35f864162063ce3fa upstream.

When persistent grants were added they were always used, even if the
backend doesn't have this feature (there's no harm in always using the
same set of pages). This restores the old data path when the backend
doesn't have persistent grants, removing the burden of doing a memcpy
when it is not actually needed.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: Felipe Franciosi <felipe.franciosi@citrix.com>
Cc: Felipe Franciosi <felipe.franciosi@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Fix up whitespace issues]
Tested-by: Felipe Franciosi <felipe@paradoxo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: revoke foreign access for grants not mapped by the backend

commit fbe363c476afe8ec992d3baf682670a4bd1b6ce6 upstream.

There's no need to keep the foreign access in a grant if it is not
persistently mapped by the backend. This allows us to free grants that
are not mapped by the backend, thus preventing blkfront from hoarding
all grants.

The main effect of this is that blkfront will only persistently map
the same grants as the backend, and it will always try to use grants
that are already mapped by the backend. Also the number of persistent
grants in blkfront is the same as in blkback (and is controlled by the
value in blkback).

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: make pcpu_alloc_chunk() use pcpu_mem_free() instead of kfree()

commit 5a838c3b60e3a36ade764cf7751b8f17d7c9c2da upstream.

pcpu_chunk_struct_size = sizeof(struct pcpu_chunk) +
BITS_TO_LONGS(pcpu_unit_pages) * sizeof(unsigned long)

It hardly could be ever bigger than PAGE_SIZE even for large-scale machine,
but for consistency with its couterpart pcpu_mem_zalloc(),
use pcpu_mem_free() instead.

Commit b4916cb17c26 ("percpu: make pcpu_free_chunk() use
pcpu_mem_free() instead of kfree()") addressed this problem, but
missed this one.

tj: commit message updated

Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 099a19d91ca4 ("percpu: allow limited allocation before slab is online)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mvebu-mbus: allow several windows with the same target/attribute

commit b566e782be32145664d96ada3e389f17d32742e5 upstream.

Having multiple windows with the same target and attribute is actually
legal, and can be useful for PCIe windows, when PCIe BARs have a size
that isn't a power of two, and we therefore need to create several
MBus windows to cover the PCIe BAR for a given PCIe interface.

Fixes: fddddb52a6c4 ('bus: introduce an Marvell EBU MBus driver')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397823593-1932-7-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Neil Greatorex <neil@fatboyfat.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: make rescuer_thread() empty wq->maydays list before exiting

commit 4d595b866d2c653dc90a492b9973a834eabfa354 upstream.

After a @pwq is scheduled for emergency execution, other workers may
consume the affectd work items before the rescuer gets to them.  This
means that a workqueue many have pwqs queued on @wq->maydays list
while not having any work item pending or in-flight.  If
destroy_workqueue() executes in such condition, the rescuer may exit
without emptying @wq->maydays.

This currently doesn't cause any actual harm.  destroy_workqueue() can
safely destroy all the involved data structures whether @wq->maydays
is populated or not as nobody access the list once the rescuer exits.

However, this is nasty and makes future development difficult.  Let's
update rescuer_thread() so that it empties @wq->maydays after seeing
should_stop to guarantee that the list is empty on rescuer exit.

tj: Updated comment and patch description.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix a possible race condition between rescuer and pwq-release

commit 77668c8b559e4fe2acf2a0749c7c83cde49a5025 upstream.

There is a race condition between rescuer_thread() and
pwq_unbound_release_workfn().

Even after a pwq is scheduled for rescue, the associated work items
may be consumed by any worker.  If all of them are consumed before the
rescuer gets to them and the pwq's base ref was put due to attribute
change, the pwq may be released while still being linked on
@wq->maydays list making the rescuer dereference already freed pwq
later.

Make send_mayday() pin the target pwq until the rescuer is done with
it.

tj: Updated comment and patch description.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix bugs in wq_update_unbound_numa() failure path

commit 77f300b198f93328c26191b52655ce1b62e202cf upstream.

wq_update_unbound_numa() failure path has the following two bugs.

- alloc_unbound_pwq() is called without holding wq->mutex; however, if
  the allocation fails, it jumps to out_unlock which tries to unlock
  wq->mutex.

- The function should switch to dfl_pwq on failure but didn't do so
  after alloc_unbound_pwq() failure.

Fix it by regrabbing wq->mutex and jumping to use_dfl_pwq on
alloc_unbound_pwq() failure.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4c16bd327c74 ("workqueue: implement NUMA affinity for unbound workqueues")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: remove lockowner when removing lock stateid

commit a1b8ff4c97b4375d21b6d6c45d75877303f61b3b upstream.

The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.

We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.

Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: warn on finding lockowner without stateid's

commit 27b11428b7de097c42f205beabb1764f4365443b upstream.

The current code assumes a one-to-one lockowner<->lock stateid
correspondance.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>