Dinh Nguyen [Thu, 27 Mar 2014 03:45:12 +0000 (22:45 -0500)]
dts: stmmac: Document the clocks property in the stmmac base document
Add the clocks and clock-names property to the base stmmac dts bindings
document.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Dinh Nguyen [Thu, 27 Mar 2014 03:45:11 +0000 (22:45 -0500)]
dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
This patch adds the dts bindings documenation for the Altera SOCFPGA glue
layer for the Synopsys STMMAC ethernet driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lee Jones [Fri, 21 Mar 2014 11:33:08 +0000 (11:33 +0000)]
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
Here we add the necessary device nodes required for successful device
probing and Pinctrl setup for the FSM when booting on an STiH415 (Orly1)
or STiH416 (Orly2) based b2020 development board.
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by Angus Clark <angus.clark@st.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lee Jones [Fri, 21 Mar 2014 11:33:07 +0000 (11:33 +0000)]
ARM: STi: stih416: Add support for the FSM Serial Flash Controller
Here we add the necessary device nodes required for successful device
probing and Pinctrl setup for the FSM when booting on an STiH416 (Orly2).
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by Angus Clark <angus.clark@st.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 27 Mar 2014 00:54:39 +0000 (01:54 +0100)]
Merge tag 'keystone-dts-fixes' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Merge "Keystone DTS fixes for 3.15" from Santosh Shilimkar:
- Few fixes found during NAND ubifs testing
- Fix to build all dtbs together with dtbs
- Last patch is follow up comment from previous pull request
* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
ARM: dts: Build all keystone dt blobs
ARM: dts: keystone: Fix control register range for clktsip
ARM: dts: keystone: Fix domain register range for clkfftc1
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Stephen Warren [Wed, 19 Mar 2014 16:36:35 +0000 (10:36 -0600)]
ARM: tegra: fix Dalmore pinctrl configuration
Remove some entries from Dalmore's device tree that attempt to set some
options which aren't supported for the drive_gma pin group.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 20 Mar 2014 21:40:02 +0000 (14:40 -0700)]
Merge tag 'tegra-for-3.15-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
Merge "ARM: tegra: device tree changes for 3.15" from Stephen Warren:
This enables:
- host1x and eDP support on Tegra124.
- LCD panel support for a few Tegra20 devices and Venice2.
- Enables power down, SPI flash, and USB on Venice2.
- Documents which Dalmore revision is supported.
- Adds an I2C bus mux to Cardhu.
Additionally, Tegra124 is converted to use #address-cells=<2> since the
HW suports more than 32-bits of address space, and various cleanups are
included.
* tag 'tegra-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (21 commits)
ARM: dts: tegra: add PCIe interrupt mapping properties
ARM: tegra: use 2 address cells for Tegra124 DT
ARM: tegra: Rename as3722 node to pmic
ARM: tegra: Fix whitespace around '='
ARM: tegra: Enable USB on Venice2
ARM: tegra: Add Tegra124 USB support
ARM: tegra: Enable eDP for Venice2
ARM: tegra: Add Tegra124 eDP support
ARM: tegra: Add Tegra124 host1x support
ARM: tegra: Hook up SDMMC3 power-supply on Venice2
ARM: tegra: Overhaul Venice2 regulators
ARM: tegra: Combine VBUS enable pins into one node
ARM: tegra: Use "disabled" for status property
ARM: tegra: add SPI flash to Venice2 DT
ARM: tegra: enable PCA9546 on Cardhu
ARM: tegra: enable LCD panel on Ventana
ARM: tegra: enable LCD panel on Seaboard
ARM: tegra: add system-power-controller property for PMIC node
ARM: tegra: document which Dalmore revisions are supported
ARM: tegra: Properly sort clocks property
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Ivan Khoronzhuk [Thu, 20 Mar 2014 21:00:27 +0000 (17:00 -0400)]
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
As suggested by Olof Johansson at
http://www.spinics.net/lists/arm-kernel/msg314009.html.
It be better just keeping a "ti,keystone" top-level compatible and
just using that to probe. If so we don't have to touch the file
for new boards in the future.
So use common "ti,keystone" compatible in keystone.c for all boards.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Murali Karicheri [Thu, 20 Mar 2014 20:39:21 +0000 (16:39 -0400)]
ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
The UBIFS partition size was incorrectly defined as for 128M NAND,
but on k2hk-evm installed NAND flash size is 512M.
Hence, correct it.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Santosh Shilimkar [Tue, 18 Mar 2014 20:02:34 +0000 (16:02 -0400)]
ARM: dts: Build all keystone dt blobs
Now we have additional two SOC/boards supported, so add
make file rule so that all device tree blobs can be build
for keystone with 'make dtbs'.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Ivan Khoronzhuk [Tue, 18 Mar 2014 19:59:26 +0000 (15:59 -0400)]
ARM: dts: keystone: Fix control register range for clktsip
The control register range for clktsio interferes with clkaemifspi clock.
And it causes issues for NAND/AEMIF. So fix it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Ivan Khoronzhuk [Tue, 18 Mar 2014 19:58:45 +0000 (15:58 -0400)]
ARM: dts: keystone: Fix domain register range for clkfftc1
The domain register range for clkfftc1 has to be 0x0235004c
instead of 0x023504c0.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Arnd Bergmann [Tue, 18 Mar 2014 15:14:47 +0000 (16:14 +0100)]
Merge tag 'DT-for-v3.15-part-1-v2' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
Merge "STi DT changes part 1 v2" from Srinivas Kandagatla:
Patches : 01-02 are DT patches, adding interrupt support to pin
controller driver, Driver changes are already going via Linus W's
pinctrl tree.
Patches: 03 - 06 are DT patches for reset/softreset controller. Reset
controller driver is Acked by Philipp Zabel.
Patches: 07, 08 are DT patches, adding Ethernet controller support
patches, actual driver changes are already in v3.14-rc4 via Dave Millers
net tree.
Patches: 09, 10 are DT patches for IR driver support, actual IR driver
is already available since v3.12. Reason for the delay is due to
dependency on reset controller driver/headers.
* tag 'DT-for-v3.15-part-1-v2' of git://git.stlinux.com/devel/kernel/linux-sti:
ARM: STi: STIH416: Add IR support.
ARM: STi: STIH415: Add IR support.
ARM: STi: STiH416: Add ethernet support.
ARM: STi: STiH415: Add ethernet support.
ARM: STi: STiH416: Add soft reset controller support.
ARM: STi: STiH416: Add reset controller support.
ARM: STi: STiH415: Add soft reset controller support.
ARM: STi: STiH415: Add reset controller support.
ARM: STi: STiH415: Add interrupt support for pin controller
ARM: STi: STiH416: Add interrupt support for pin controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 14:19:23 +0000 (15:19 +0100)]
Merge tag 'armsoc/for-3.15/dt-2' of git://github.com/broadcom/mach-bcm into next/dt
Merge "ARM: mach-bcm: dt updates for 3.15 - part 2" from Matt Porter:
- BCM21664 SoC support
- BCM59056 PMU support
- BCM281xx reboot fix
* tag 'armsoc/for-3.15/dt-2' of git://github.com/broadcom/mach-bcm:
ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
ARM: dts: bcm21664: Add device tree files.
ARM: DT: bcm21664: Device tree bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 14:17:07 +0000 (15:17 +0100)]
Merge tag 'omap-for-v3.15/dt-overo-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Updates to the .dts files to support more Gumstix boards.
These are sent separately from the rest of the .dts changes
as these depend on the fixes merged into v3.14-rc4, and
needed a bit more time to get updated on the fixes.
* tag 'omap-for-v3.15/dt-overo-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add support for the Overo Summit
ARM: dts: Add support for the Overo Chestnut43
ARM: dts: Add support for the Overo Alto35
ARM: dts: Add support for the Overo Gallop43
ARM: dts: Add support for the Overo Palo43
ARM: dts: overo: Add LIS33DE accelerometer
ARM: dts: overo: Create a file for common Gumstix peripherals
ARM: dts: overo: Push uart3 pinmux down to expansion board
ARM: dts: omap3-tobi: Add AT24C01 EEPROM
ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221
ARM: dts: omap: Add common file for SMSC9221
ARM: dts: omap3-overo: Add HSUSB PHY
ARM: dts: omap3-overo: Enable WiFi/BT combo
ARM: dts: omap3-overo: Add missing pinctrl
ARM: dts: omap3-tobi: Add missing pinctrl
ARM: dts: overo: reorganize include files
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Conflicts:
arch/arm/boot/dts/omap3-overo.dtsi
Arnd Bergmann [Mon, 17 Mar 2014 14:11:10 +0000 (15:11 +0100)]
Merge tag 'omap-for-v3.15/dt-part3' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Pull "omap device tree changes for v3.15, part 3" from Tony Lindgren:
Device tree related changes to the omap iommu driver as that
is finally getting updated. Also few trivial board related
.dts updates to add more devices.
* tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
ARM: dts: am335x-evmsk: enable DMA controller for USB
ARM: dts: OMAP5: Add IOMMU nodes
ARM: dts: OMAP4: Add IOMMU nodes
ARM: dts: OMAP3: Add IVA IOMMU node
ARM: dts: OMAP3: Update ISP IOMMU node
ARM: OMAP2+: extend iommu pdata-quirks to OMAP5
ARM: OMAP5: hwmod data: add mmu data for ipu & dsp
ARM: OMAP2+: use pdata quirks for iommu reset lines
ARM: OMAP2+: change the ISP device archdata MMU name for DT
ARM: OMAP3: fix iva mmu programming issues
ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 14:08:59 +0000 (15:08 +0100)]
Merge tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux into next/dt
Pull "Allwinner DT additions for 3.15, take 2" from Maxime Ripard:
- Two new boards: INet 97F Rev 02 and A10-OLinuXino-LIME
- Addition of the I2C for the A31
- Addition USB Host mode for the A10, A10s, A13 and A20
- Addition of SATA support for the A10 and A20
- Change of compatible for the watchdog
* tag 'sunxi-dt-for-3.15-2' of https://github.com/mripard/linux: (23 commits)
ARM: sunxi: dt: Update the watchdog compatibles
ARM: sun6i: colombus: Enable the I2C controllers
ARM: sun6i: Enable the I2C muxing options
ARM: sun6i: Enable the I2C controllers
ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board
ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts
ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts
ARM: sun7i: dt: Add USB host nodes to cubietruck dts
ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro
ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-micro
ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino
ARM: sun4i: dt: Add USB host nodes to pcduino.dts
ARM: sun4i: dt: Add USB host nodes to mini-xplus dts
ARM: sun4i: dt: Add USB host nodes to hackberry dts
ARM: sun4i: dt: Add USB host nodes to cubieboard dts
ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts
ARM: sun7i: dt: Add USB host bindings
ARM: sun5i: dt: Add USB host bindings
ARM: sun4i: dt: Add USB host bindings
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 14:05:35 +0000 (15:05 +0100)]
Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt
Merge "First batch of AT91 DT material for 3.15" from Nicolas Ferre:
- activate DMA for NAND flash controller
- some binding documentation update for usba and ADC (iio) drivers
- removal of some deprecated ADC (iio) properties
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91-cosino: remove useless adc properties
ARM: at91/dt: sama5d3: remove useless adc properties
ARM: at91/dt: at91sam9x5: remove useless adc properties
ARM: at91/dt: at91sam9g45: remove useless adc properties
ARM: at91/dt: at91sam9260: remove useless adc properties
ARM: at91/dt: at91-ariag25: remove useless adc properties
Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt
Documentation: dt: iio: improve atmel-adc documentation
ARM: at91: sama5d3: get rid of atmel_tsadcc driver
ARM: at91/DT: atmel_usba correct atmel,vbus-gpio meaning
ARM: at91/DT: add NAND + DMA property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 10:08:40 +0000 (11:08 +0100)]
Merge tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental #5)" from Jason Cooper:
- mvebu
- 38x
- add 2GHz fixed clock, core divider clock, and nand controller
- 385
- add nand controller and partitions to 385-DB board
* tag 'mvebu-dt-3.15-5' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Enable NAND controller in Armada 385-DB
ARM: mvebu: Add support for NAND controller in Armada 38x SoC
ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 10:07:25 +0000 (11:07 +0100)]
Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper:
- dove
- add system controller node
- drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI
- mvebu
- XP/370
- change default PCIe apertures
- switch GP and DB boards internal registers to 0xf1000000
- correct RAM size on Matrix board
- 385
- correct phy connection type for DB board
- add RD board
* tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu:
ARM: dove: drop pinctrl PMU reg property
ARM: mvebu: add Device Tree for the Armada 385 RD board
ARM: mvebu: use the correct phy connection mode on Armada 385 DB
ARM: mvebu: the Armada XP Matrix board has 4 GB
ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000
ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000
ARM: mvebu: change the default PCIe apertures for Armada 370/XP
ARM: dove: add system controller node
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 10:50:05 +0000 (11:50 +0100)]
Merge branch 'mvebu/soc3' into next/dt
The dts Makefile has a bunch of nasty conflicts, attempt to resolve
these now to avoid trouble later.
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 10:02:46 +0000 (11:02 +0100)]
Merge tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental pull #3)" from Jason Cooper:
- mvebu
- merge armada 375, 380, 385 boards (mvebu/dt-3xx)
- kirkwood
- Add many Synology NAS boards
- add board HP T5325
- add L2 cache node
- add system-controller node
- add audio node
- dove
- add pinctrl and global-config register
Depends:
- tags/mvebu-dt-fixes-3.14 (mvebu/dt-fixes)
- removed dove PMU interrupt controller
Conflicts:
- mvebu/soc (arch/arm/boot/dts/Makefile)
- add/add conflict.
- move CONFIG_ARCH_LPC32XX to alphabetical order (after KIRKWOOD)
* tag 'mvebu-dt-3.15-3' of git://git.infradead.org/linux-mvebu:
ARM: kirkwood: Add dts file describing HP T5325 thin client
ARM: kirkwood: Add i2c alias so setting bus number
ARM: kirkwood: Add audio node to kirkwood.dtsi
ARM: mvebu: select dtbs from MACH_ARMADA_*
ARM: dove: add global-config register node
ARM: dove: add additional pinctrl registers
ARM: mvebu: Instantiate system controller in kirkwood.dtsi
ARM: kirkwood: Instantiate L2 cache from DT.
ARM: mvebu: use macros for interrupt flags on Armada 375/38x
ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
ARM: Kirkwood: Add support for many Synology NAS devices
DT: i2c: Trivial: Add sii,s35390a
DT: Vendor prefixes: Add ricoh, qnap, sii and synology
ARM: dove: dt: revert PMU interrupt controller node
ARM: mvebu: add Device Tree for the Armada 385 DB board
ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs
ARM: mvebu: add Device Tree for the Armada 375 DB board
ARM: mvebu: add Device Tree description of the Armada 375 SoC
ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260
Conflicts:
Documentation/devicetree/bindings/vendor-prefixes.txt
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 09:14:40 +0000 (10:14 +0100)]
Merge tag 'efm32-next' of git://git.pengutronix.de/git/ukl/linux into next/dt
Merge "Two more dt related efm32 fixes" from Uwe Kleine-König:
* tag 'efm32-next' of git://git.pengutronix.de/git/ukl/linux:
ARM: efm32: properly namespace i2c location property
ARM: efm32: fix unit address part in USART2 device nodes' names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Mon, 17 Mar 2014 09:14:10 +0000 (10:14 +0100)]
Merge branch 'efm32/cleanup' into next/dt
Dependency for efm32/dt branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Olof Johansson [Mon, 17 Mar 2014 07:46:17 +0000 (00:46 -0700)]
Merge tag 'renesas-dt4-for-v3.15' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Fourth Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon
Horman:
* r8a7791 (R-Car M2) based koelsch board
- Add SDHI devices
- Add ethernet
* r8a7791 (R-Car M2) SoC
- Correct clock index for i2c5
* r8a7790 (R-Car H2) based lager board
- Add ethernet
* tag 'renesas-dt4-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Add SDHI devices for Koelsch DTS
ARM: shmobile: Add SDHI devices to r8a7791 DTSI
ARM: shmobile: r8a7791: fix clock index for i2c5
ARM: shmobile: koelsch: add Ether DT support
ARM: shmobile: r8a7791: add Ether DT support
ARM: shmobile: lager: add Ether DT support
ARM: shmobile: r8a7790: add Ether DT support
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 17 Mar 2014 07:16:56 +0000 (00:16 -0700)]
Merge tag 'renesas-dt3-for-v3.15' of git://git./linux/kernel/git/horms/renesas into next/dt
Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.15" from Simon
Horman:
* r7s72100 SoC (RZ/A1H)
- Add nodes for i2c controllers to DT
* r7s72100 (RZ/A1H) based Genmai board
- genmai: adapt dts to use native i2c driver
* r8a7791 SoC (R-Car M2)
- Remove superfluous interrupt-parents
* r8a7791 (R-Car M2) based Koelsch board
- Add i2c2 bus to DT
- Add DU device to DT
* r8a7790 SoC (R-Car H2)
- Add i2c aliases
- Remove superfluous interrupt-parents
- Add QSPI node
* r8a7790 SoC (R-Car M2) based Lager
- Add DU, SDHI0/1 and QSPI to DT
* r8a7778 SoC (R-Car M1)
- Remove duplicate i2c nodes
* tag 'renesas-dt3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: genmai: adapt dts to use native i2c driver
ARM: shmobile: r7s72100: add nodes for i2c controllers to dtsi
ARM: shmobile: r8a7791: add i2c2 bus to koelsch dt
ARM: shmobile: r8a7791: add i2c master nodes to dtsi
ARM: shmobile: r8a7790: add i2c aliases to dtsi
ARM: shmobile: r8a7790: remove superfluous interrupt-parents
ARM: shmobile: r8a7791: remove superfluous interrupt-parents
ARM: shmobile: koelsch-reference: Add DU device to DTS
ARM: shmobile: lager: Add DU device to DTS
ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes
ARM: shmobile: lager: add SDHI0/2 support on DTS
ARM: shmobile: lager dts: Add QSPI nodes
ARM: shmobile: r8a7790 dtsi: Add QSPI node
Signed-off-by: Olof Johansson <olof@lixom.net>
Matt Porter [Wed, 12 Mar 2014 13:14:39 +0000 (09:14 -0400)]
ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
The BCM28155-AP board has a bootloader that expects the camldo1
regulator to be enabled on entry. Currently, the camldo1 regulator
is disabled when no longer in use as is the case during a reboot /
warm reset. This causes the early bootloader to hang upon entry. Add
regulator-always-on to the camldo1 constraint to fix reboot.
Reported-by: Alex Elder <elder@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
Matt Porter [Wed, 12 Mar 2014 14:07:17 +0000 (10:07 -0400)]
ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
Add a dtsi to support the BCM590xx PMUs used by the BCM281xx family
of SoCs. Enable regulators for use with the dwc2 and sdhci on
bcm28155-ap.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Markus Mayer [Thu, 6 Mar 2014 09:18:14 +0000 (17:18 +0800)]
ARM: dts: bcm21664: Add device tree files.
Add device tree files for the Broadcom BCM21664 SoC.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Markus Mayer [Thu, 6 Mar 2014 09:18:12 +0000 (17:18 +0800)]
ARM: DT: bcm21664: Device tree bindings
Add binding documents for the Broadcom BCM21664 SoC.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Uwe Kleine-König [Fri, 14 Mar 2014 14:24:52 +0000 (15:24 +0100)]
ARM: efm32: properly namespace i2c location property
Wolfram Sang pointed out during review of an efm32-i2c driver that the
property to specify the set of pins has a too general name. As several
other efm32 peripherals also have a similar register bit field, add an
"efm32" namespace.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Fri, 14 Mar 2014 14:51:15 +0000 (15:51 +0100)]
ARM: efm32: fix unit address part in USART2 device nodes' names
While removing the 0x prefixes in the unit addresses in reply to a review
comment, I must somehow have messed up these two. Uups.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Ezequiel Garcia [Thu, 13 Mar 2014 20:24:32 +0000 (17:24 -0300)]
ARM: mvebu: Enable NAND controller in Armada 385-DB
The Armada 385-DB board has a NAND flash, so enable it in the
devicetree and add the partitions as prepared in the factory images.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-6-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Thu, 13 Mar 2014 20:24:31 +0000 (17:24 -0300)]
ARM: mvebu: Add support for NAND controller in Armada 38x SoC
The Armada 38x SoC family has a NAND controller, compatible
with the controller in Armada 370/375/XP SoCs. Add support for
it in the devicetree file.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-5-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Thu, 13 Mar 2014 20:24:30 +0000 (17:24 -0300)]
ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
The Armada 38x SoC family has a clock provider called "Core Divider",
derived from the fixed 2 GHz main PLL clock. This is similar to the
one on A370, A375 and AXP.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-4-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Ezequiel Garcia [Thu, 13 Mar 2014 20:24:29 +0000 (17:24 -0300)]
ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
Armada 38x SoCs have a 2 GHz fixed main PLL that is used to feed
other clocks. This commit adds a DT representation of this clock
through a fixed-clock compatible node.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1394742273-5113-3-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Maxime Ripard [Fri, 7 Feb 2014 21:29:26 +0000 (22:29 +0100)]
ARM: sunxi: dt: Update the watchdog compatibles
The watchdog compatibles were following a different pattern than the one found
in the other devices. Now that the driver supports the right pattern, switch to
it in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:25 +0000 (20:17 +0100)]
ARM: at91/dt: at91-cosino: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver.
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:24 +0000 (20:17 +0100)]
ARM: at91/dt: sama5d3: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver and fix
the atmel,adc-use-external-triggers property name.
Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:23 +0000 (20:17 +0100)]
ARM: at91/dt: at91sam9x5: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver and fix
the atmel,adc-use-external-triggers property name.
Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:22 +0000 (20:17 +0100)]
ARM: at91/dt: at91sam9g45: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver.
Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:21 +0000 (20:17 +0100)]
ARM: at91/dt: at91sam9260: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver.
Also, add #address-cells, #size-cells and a reg for each trigger to comply to
the ePAPR.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:20 +0000 (20:17 +0100)]
ARM: at91/dt: at91-ariag25: remove useless adc properties
Remove the properties that are not used anymore by the at91_adc driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:19 +0000 (20:17 +0100)]
Documentation: dt: iio: move arm/atmel-adc.txt to iio/adc/at91_adc.txt
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 10 Mar 2014 19:17:18 +0000 (20:17 +0100)]
Documentation: dt: iio: improve atmel-adc documentation
This corrects the example by adding #address-cells, #size-cells and a reg for
each trigger to comply to the ePAPR, as suggested by Mark Rutland in
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html
Also, it removes the properties that are not used anymore, to stop propagating
them.
Also fixes atmel,adc-use-external-triggers property name.
Finally, fixes a few typos.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Stefan Roese [Wed, 12 Mar 2014 10:49:12 +0000 (11:49 +0100)]
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
Add support for the MMC2/SDIO WiFi Libertas (Marvell) module available
on the CM-T3530 SOM.
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yegor Yefremov [Mon, 10 Mar 2014 15:26:57 +0000 (16:26 +0100)]
ARM: dts: am335x-evmsk: enable DMA controller for USB
Enable DMA controller for USB
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:35 +0000 (13:20 +0100)]
ARM: dts: Add support for the Overo Summit
Summit is an expansion board for Gumstix Overo products.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:34 +0000 (13:20 +0100)]
ARM: dts: Add support for the Overo Chestnut43
Chestnut43 is an expansion board for Gumstix Overo products.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:33 +0000 (13:20 +0100)]
ARM: dts: Add support for the Overo Alto35
Alto35 is an expansion board for Gumstix Overo products.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:32 +0000 (13:20 +0100)]
ARM: dts: Add support for the Overo Gallop43
Gallop43 is an expansion board for Gumstix Overo products.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:31 +0000 (13:20 +0100)]
ARM: dts: Add support for the Overo Palo43
Palo43 is an expansion board for Gumstix Overo products.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:30 +0000 (13:20 +0100)]
ARM: dts: overo: Add LIS33DE accelerometer
The LIS33DE accelerometer is used on several Gumstix expansion boards,
thus add the DT node to omap3-overo-common-peripherals.dtsi.
For the boards that do not have the accelerometer (like Tobi), mark the
status as disabled.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Tue, 11 Mar 2014 12:20:29 +0000 (13:20 +0100)]
ARM: dts: overo: Create a file for common Gumstix peripherals
Gumstix expansion boards share a couple of peripherals:
- uart3 is used for the console
- AT24C01 EEPROM on i2c3
Use this file for overo-tobi.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:19 +0000 (20:22 +0100)]
ARM: dts: overo: Push uart3 pinmux down to expansion board
UART3 is used by expansion boards to get a tty console. Thus, the
pinmux should be defined by expansion boards, instead of being
imposed by the processor board.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:18 +0000 (20:22 +0100)]
ARM: dts: omap3-tobi: Add AT24C01 EEPROM
Add the AT24C01 EEPROM node populated on most Gumstix expansion board.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:17 +0000 (20:22 +0100)]
ARM: dts: omap3-tobi: Use include file omap-gpmc-smsc9221
Use the timings provided by omap-gpmc-smsc9221. This does not change
the timings, but it avoids code duplication.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:16 +0000 (20:22 +0100)]
ARM: dts: omap: Add common file for SMSC9221
Some devices (SMSC9217, SMSC9218 and SMSC9221 at least) have better
timings, allowing a higher transfer speed. Create a common file
with these timings.
Performance results with iperf:
- omap-gpmc-smsc911x.dtsi => 54.9 Mbps
- omap-gpmc-smsc9221.dtsi => 92.7 Mbps
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:15 +0000 (20:22 +0100)]
ARM: dts: omap3-overo: Add HSUSB PHY
Add the High-Speed USB PHY.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:14 +0000 (20:22 +0100)]
ARM: dts: omap3-overo: Enable WiFi/BT combo
MMC2 is used by the on-board WiFi module populated on some boards
(based on Marvell Libertas 8688 SDIO). The Bluetooth is connected
to UART2.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:13 +0000 (20:22 +0100)]
ARM: dts: omap3-overo: Add missing pinctrl
Add missing pinctrl entries for:
- i2c1
- mmc1
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:12 +0000 (20:22 +0100)]
ARM: dts: omap3-tobi: Add missing pinctrl
Add missing pinctrl entries:
- i2c3
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Fri, 7 Mar 2014 19:22:11 +0000 (20:22 +0100)]
ARM: dts: overo: reorganize include files
Currently, overo-related include files are organized as follow:
omap3-overo.dtsi
|
|
omap34xx.dtsi omap3-overo-tobi-common.dtsi omap36xx.dtsi
| | | |
--------------- ---------------
| |
omap3-overo-tobi.dts omap3-overo-storm-tobi.dts
This is unpractical when one has to deal with SoC-specific pinmux
belonging to the omap3_pmx_core2 (defined in omap34xx/omap36xx),
for pins related to the processor board. With the current
hierarchy, such pinmux has to be defined in the expansion board's
.dts, which is not logical.
This patches reorganizes the files to add (yet another) abstraction
layer between the processor and the expansion boards.
omap34xx.dtsi omap3-overo-base.dtsi omap36xx.dtsi
| | | |
--------------- ---------------
| |
omap3-overo.dtsi omap3-overo-storm.dtsi
| |
-------- ------
| omap3-overo-tobi-common.dtsi |
| | | |
--------------- ---------------
| |
omap3-overo-tobi.dts omap3-overo-storm-tobi.dts
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna [Thu, 6 Mar 2014 00:24:19 +0000 (18:24 -0600)]
ARM: dts: OMAP5: Add IOMMU nodes
The IOMMU DT nodes have been added for the DSP and IPU
subsystems. The MMUs in OMAP5 are identical to those in
OMAP4, including the bus error back capability on IPU.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Thu, 6 Mar 2014 00:24:18 +0000 (18:24 -0600)]
ARM: dts: OMAP4: Add IOMMU nodes
Add the IOMMU nodes for the DSP and IPU subsystems. The MMU
within the IPU sub-system also supports a bus error back
capability, not available on the DSP MMU.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: IPU bus error back addition]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Thu, 6 Mar 2014 00:24:17 +0000 (18:24 -0600)]
ARM: dts: OMAP3: Add IVA IOMMU node
Add the DT node for the IOMMU within the DSP subsystem. The entry
is disabled to keep in line with the hwmod usage as intended by
the deprecated CONFIG_OMAP_IOMMU_IVA2 flag.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: split the entry and disable the node]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Thu, 6 Mar 2014 00:24:16 +0000 (18:24 -0600)]
ARM: dts: OMAP3: Update ISP IOMMU node
Update the IOMMU node for the camera subsystem as per the
OMAP IOMMU bindings.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: corrected interrupt number]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna [Thu, 6 Mar 2014 00:24:15 +0000 (18:24 -0600)]
ARM: OMAP2+: extend iommu pdata-quirks to OMAP5
OMAP5 has the same iommus as OMAP4, so extend the OMAP4
iommu pdata quirks for OMAP5 as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna [Thu, 6 Mar 2014 00:24:14 +0000 (18:24 -0600)]
ARM: OMAP5: hwmod data: add mmu data for ipu & dsp
A new MMU hwmod class and data structures are created
to represent the MMUs within the IPU and DSP processor
subsystems in OMAP5. The MMUs in OMAP5 are identical to
those in OMAP4.
Cc: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna [Thu, 6 Mar 2014 00:24:13 +0000 (18:24 -0600)]
ARM: OMAP2+: use pdata quirks for iommu reset lines
The OMAP iommu driver performs the reset management for the
iommu instances in processor sub-systems using the omap_device
API which are currently supplied as platform data ops. Use pdata
quirks to maintain the functionality as the OMAP iommu driver
gets converted to use DT nodes, until the reset portions are
decoupled from omap_hwmod/omap_device into a separate reset
driver.
This patch adds the pdata quirks for the reset management of
iommus within the DSP (OMAP3 & OMAP4) and IPU subsystems (OMAP4).
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna [Thu, 6 Mar 2014 00:24:12 +0000 (18:24 -0600)]
ARM: OMAP2+: change the ISP device archdata MMU name for DT
The IOMMU DT adaptation support uses the device name instead
of an iommu object name. Fixup the ISP device archdata MMU
name at runtime if using DT-boot. This allows the OMAP3 camera
to be functional in both legacy and DT boots. The iommu object
names should eventually vanish when all the IOMMU users have
been converted to DT nodes.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Suman Anna [Thu, 6 Mar 2014 00:24:11 +0000 (18:24 -0600)]
ARM: OMAP3: fix iva mmu programming issues
The IVA MMU is not functional when used through the hwmod and
omap_device layers. Add fixes to clockdomain and hwmod data
to have it functional. The hwmod changes are needed to enable
the clock, and the SWSUP change is needed to wakeup the domain
because the power domain is programmed to be in RET, and there
is no automatic power domain switching to ON.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Florian Vaussard [Thu, 6 Mar 2014 00:24:10 +0000 (18:24 -0600)]
ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2
CONFIG_OMAP_IOMMU_IVA2 was defined originally to avoid conflicting
usage by tidspbridge and other iommu users. The same can be achieved
by marking the DT node disabled, so remove this obsolete flag and
the corresponding hwmod data can be enabled.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: revise commit log]
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Ludovic Desroches [Wed, 26 Feb 2014 16:29:50 +0000 (17:29 +0100)]
ARM: at91: sama5d3: get rid of atmel_tsadcc driver
Touchscreen support for at91_adc has been introduced so we can get rid of
atmel_tsadcc.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Thu, 27 Feb 2014 15:45:10 +0000 (16:45 +0100)]
ARM: at91/DT: atmel_usba correct atmel,vbus-gpio meaning
atmel,at91sam9rl-udc is a USB gadget, it has no means to control vbus.
atmel,vbus-gpio is in fact used to detect the presence of vbus.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: modify the commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Olof Johansson [Tue, 11 Mar 2014 21:21:28 +0000 (14:21 -0700)]
Merge tag 'zynq-dt-for-3.15' of git://git.xilinx.com/linux-xlnx into next/dt
Merge "arm: Xilinx Zynq dt patches for v3.15" from Michal Simek:
- Define fclk-enable property
* tag 'zynq-dt-for-3.15' of git://git.xilinx.com/linux-xlnx:
arm: dt: zynq: Add fclk-enable property to clkc node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Mar 2014 20:32:49 +0000 (13:32 -0700)]
Merge tag 'omap-for-v3.15/dt-part2' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap device tree changes for v3.15, part 2" from Tony Lindgren:
Part two of omap device tree changes enabling driver features
in the dts files.
* tag 'omap-for-v3.15/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-evmsk: enable dual_emac mode
ARM: dts: DRA7: Add device nodes for ABB
ARM: dts: OMAP4: Add device nodes for ABB
ARM: dts: OMAP36xx: Add device node for ABB
ARM: dts: am43x-epos-evm: add SD card hotplug support
ARM: dts: am335x-evm: add SD card hotplug support
ARM: dts: am437x gp-evm: add sd card dt nodes
ARM: dts: omap5: added dt properties to adapt to the new phy framwork
ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK
ARM: dts: Update echi-omap DT binding example usage
ARM: dts: Get rid of incompatible ids for hci-omap USB host nodes
ARM: OMAP2+: Remove legacy_init_ehci_clk()
ARM: dts: Add support for OMAP4 Gumstix DuoVero/Parlor
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Mar 2014 20:30:39 +0000 (13:30 -0700)]
Merge tag 'bcm2835-for-3.15-dt' of git://git./linux/kernel/git/swarren/linux-rpi into next/dt
Merge "ARM: bcm2835: DT changes for 3.15" from Stephen Warren:
A variety of features are added to the bcm2835 device trees:
- ARM PMU, for perf_event
- DMA controller
- I2S controller
A few cleanups are applied to the DTs too.
* tag 'bcm2835-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
ARM: bcm2835: fix clock DT node names
ARM: bcm2835: node name unit address cleanup
ARM: bcm2835: fix DT node sort order
ARM: bcm2835: add I2S driver to device tree
ARM: bcm2835: add dmaengine driver to device tree
ARM: bcm2835: perf_event support for Raspberry-Pi
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Mar 2014 20:23:09 +0000 (13:23 -0700)]
Merge tag 'armsoc/for-3.15/dt' of git://github.com/broadcom/mach-bcm into next/dt
Merge "ARM: mach-bcm dt updates for 3.15" from Matt Porter:
- add BCM4708 dt support
- remove bcm11351-brt
- bcm281xx common clock support
* tag 'armsoc/for-3.15/dt' of git://github.com/broadcom/mach-bcm:
ARM: dts: remove bcm11351-brt.dts
ARM: dts: Leave sdio1 as disabled on bcm28155-ap
ARM: dts: bcm281xx: define real clocks
ARM: BCM5301X: add dts files for BCM4708 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Mar 2014 20:00:21 +0000 (13:00 -0700)]
Merge tag 'keystone-dts' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Keystone DTS updates for 3.15 from Santosh Shilimkar:
- Add watchdog timer, timer64 and gpio device nodes
- Add LED device nodes
- Fixes for debugss, msmc clock nodes
- Add support for Keystone Lamarr and Edision SOC/EVM support
- Add NAND and AEMIF device nodes
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: add AEMIF/NAND device entry
ARM: dts: keystone: add support for k2 Edison SoC and EVM
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
ARM: dts: keystone: update for supporting K2L/K2E EVMs
ARM: dts: keystone: fix domain id for clkdebugsstrc
ARM: dts: keystone: drop msmcsram clock node
ARM: dts: k2hk-evm: rename clock node to clocks
ARM: dts: k2hk-evm: add leds supports
ARM: dts: keystone: add gpio device entry
ARM: dts: keystone: add keystone timer entry
ARM: dts: keystone: add watchdog entry
Signed-off-by: Olof Johansson <olof@lixom.net>
Srinivas Kandagatla [Mon, 11 Nov 2013 13:20:44 +0000 (13:20 +0000)]
ARM: STi: STIH416: Add IR support.
This patch adds IRB support to STiH416 platforms.
Tested on B2000 and B2020 development board
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Mon, 11 Nov 2013 13:19:18 +0000 (13:19 +0000)]
ARM: STi: STIH415: Add IR support.
This patch adds IRB support to STiH415 platforms.
Tested on B2000 and B2020 development boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Wed, 29 Jan 2014 16:20:12 +0000 (16:20 +0000)]
ARM: STi: STiH416: Add ethernet support.
This patch adds support to STiH416 SOC, which has two ethernet
snps,dwmac controllers version 3.710. With this patch B2000 and B2020
boards can boot with ethernet in MII and RGMII modes.
Tested on both B2020 and B2000.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Wed, 29 Jan 2014 16:19:44 +0000 (16:19 +0000)]
ARM: STi: STiH415: Add ethernet support.
This patch adds support to STiH415 SOC, which has two ethernet
snps,dwmac controllers version 3.610. With this patch B2000 and B2020
boards can boot with ethernet in MII and RGMII modes.
Tested on both B2020 and B2000.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Tue, 11 Mar 2014 09:36:14 +0000 (09:36 +0000)]
ARM: STi: STiH416: Add soft reset controller support.
This patch adds soft reset controller support for STiH415 and adds new
softreset lines required for other device tree nodes in the header file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Tue, 11 Mar 2014 09:35:12 +0000 (09:35 +0000)]
ARM: STi: STiH416: Add reset controller support.
This patch adds a reset controller node to the SOC device tree and also
adds new header files with reset lines required for other device tree
nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Tue, 11 Mar 2014 09:32:49 +0000 (09:32 +0000)]
ARM: STi: STiH415: Add soft reset controller support.
This patch adds soft reset controller support for STiH415 and adds new
softreset lines required for other device tree nodes in the header file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Tue, 11 Mar 2014 09:24:55 +0000 (09:24 +0000)]
ARM: STi: STiH415: Add reset controller support.
This patch adds a reset controller node to the SOC device tree and also
adds new header files with reset lines required for other device tree
nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Wed, 8 Jan 2014 12:49:57 +0000 (12:49 +0000)]
ARM: STi: STiH415: Add interrupt support for pin controller
This patch adds interrupt support for STiH415 pin controllers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Srinivas Kandagatla [Wed, 8 Jan 2014 12:47:52 +0000 (12:47 +0000)]
ARM: STi: STiH416: Add interrupt support for pin controller
This patch adds interrupt support for STiH416 pin controllers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Nicolas Ferre [Mon, 1 Jul 2013 15:05:18 +0000 (17:05 +0200)]
ARM: at91/DT: add NAND + DMA property
Add the "atmel,nand-has-dma" property to NAND node for SoC that
can use the DMA to perform NAND accesses.
Use of this property was added in
1b7192658a08f70df0f290634fd7cd2ecb629fc9
(mtd: atmel_nand: add a new dt binding item for nand dma support).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Olof Johansson [Sun, 9 Mar 2014 19:01:52 +0000 (12:01 -0700)]
Merge tag 'imx-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
i.MX device tree changes for 3.15, take 2 from Shawn Guo:
- Cleanup and device additions for imx27-phytec-phycard boards
- eDMA and audio support for vf610-twr board
- Minor updates and fixes for a couple of imx28 and imx5 boards
* tag 'imx-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: dts: vf610: i2c: Add eDMA support
ARM: dts: imx27-phytec-phycore-som: Add USBOTG node
ARM: dts: imx27-phytec-phycore-rdk: Add USBH2 node
ARM: dts: i.MX27: Add USB nodes
ARM: dts: vf610-twr: Add ADC support
ARM: dts: mxs: Fix the RTC compatible prop on M28EVK
ARM: dts: vf610-twr: Add simple-card support.
ARM: dts: vf610-twr: Enable SGTL5000 codec.
ARM: dts: vf610-twr: Enable SAI ALSA SoC DAI device
ARM: dts: vf610: Add edma mux Tx and Rx support for SAI node.
ARM: dts: vf610: lpuart: Add eDMA support
ARM: dts: vf610: Add eDMA node
ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs
ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
ARM: dts: i.MX51 babbage: Support diagnostic LED
ARM: dts: imx28-tx28: Remove 'enable-active-low' property
ARM: dts: mx53: Remove 'enable-active-low' property
ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2
ARM: dts: imx27-phytec-phycard-s-som: Add NFC node
ARM: dts: imx27-phytec-phycard-s-som: Sort entries
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 18:59:18 +0000 (11:59 -0700)]
Merge tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
i.MX6 device tree changes for 3.15, take 2 from Shawn Guo:
- Add USB, GPMI and SATA support for imx6q-phytec board
- Update imx6sl-evk board support regarding PFUZE100, audio and
LED etc.
- Minor updates on a few imx6qdl boards
* tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: dts: imx6q-phytec: Added SATA Support
ARM: dts: imx6q-phytec: Added GPMI-NAND Support
ARM: dts: imx6q-phytec: Added USB_HOST Support
ARM: dts: imx6q-phytec: Added USB_OTG Support
ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled
ARM: dts: imx6qdl-sabreauto: Support debug LED
ARM: dts: imx6q: add 852MHz setpoint for CPU freq
ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt
ARM: dts: imx6sl-evk: Add debug LED support
ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support
ARM: dts: imx6sl-evk: Add audio support
ARM: dts: imx6sl-evk: Add PFUZE100 support
ARM: dts: imx6qdl-sabresd: correct gpio key's active state
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 18:44:23 +0000 (11:44 -0700)]
Merge tag 'ux500-dt-v3.15-2' of git://git./linux/kernel/git/linusw/linux-stericsson into next/dt
A set of device tree-related cleanups for the ux500 platform from Linus
Walleij:
- Rename SSP/SPI clocks to the name found in the hardware
reference manual. (Also includes a rename in the U300
device tree file.)
- Delete dead non-DT code.
- Drop now completely unused GPIO definition header file.
- Delete all hardcoded IRQ number assignments. This hits
MFD a bit so the patch has been ACKed by Lee Jones from
the MFD side.
* tag 'ux500-dt-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
mfd: dbx500/abx500: root out hardcoded IRQ assignments
ARM: ux500: drop a chunk of GPIO definitions
ARM: ux500: skip GIC CPU and dist address checks
ARM: ux500: delete pointless DT config option
ARM: u300: switch SSP/SPI clock name to "SSPCLK"
ARM: ux500: switch SSP/SPI clock name to "SSPCLK"
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 18:40:13 +0000 (11:40 -0700)]
Merge tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux into next/dt
Allwinner DT patches for 3.15, take 1 from Maxime Ripard:
- Add SPI controllers for all the SoCs
- Add various missing aliases
- Add USB clocks nodes
- Addition of the GMAC support
- Introduction of the pcDuino board
- A few DT cleanup patches: change of compatibles,
* tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux: (33 commits)
ARM: sun6i: dt: Fix mod0 compatible
ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro
ARM: dt: sun7i: Add SPI muxing options
ARM: dt: sun5i: Add A13 SPI controller nodes
ARM: dt: sun5i: Add A10s SPI controller nodes
ARM: dt: sun4i: Add A10 SPI controller nodes
ARM: dt: sun7i: Add A20 SPI controller nodes
ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators
ARM: sunxi: dt: Convert to the new clock compatibles
ARM: sun7i: add arch timer node
ARM: sun7i: dt: Add bindings for USB clocks
ARM: sun5i: dt: Add bindings for USB clocks
ARM: sun4i: dt: Add bindings for USB clocks
ARM: dts: sun7i: Add ethernet alias for GMAC
ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC
ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
ARM: dts: sun7i: cubietruck: Enable the GMAC
ARM: dts: sun7i: Add pin muxing options for the GMAC
ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 18:33:01 +0000 (11:33 -0700)]
Merge tag 'exynos-clk' of git./linux/kernel/git/kgene/linux-samsung into next/dt
Samsung exynos clock related DT updates for v3.15 from Kukjim Kim:
- use macros instead of hard coded numbers for clock bindings
NOTE: this is based on v3.15-next/dt-samsung
* tag 'exynos-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: use macros in clock bindings for exynos5440
ARM: dts: use macros in clock bindings for exynos5420
ARM: dts: use macros in clock bindings for exynos5250
ARM: dts: use macros in clock bindings for exynos4
Olof Johansson [Sun, 9 Mar 2014 18:30:49 +0000 (11:30 -0700)]
Merge tag 'samsung-dt' of git./linux/kernel/git/kgene/linux-samsung into next/dt
Samsung DT updates for v3.15 from Kukjin Kim:
For exynos4412
- update vdd_arm voltage range for odroidx board
For exynos5250
- add PMU sysreg node and update watchdog node
- re-organize RTC status
- add max77686 pmic node for smdk5250
For exynos5420
- add PMU sysreg, i2s, adma and watchdog nodes
- re-organize RTC status
- add fixed voltage regulators and regulator nodes
for smdk5420
- add PMIC, GPIO based wake up key and vmmc-supply
support for arndale-octa board
* tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add vmmc-supply to MMC on arndale-octa board
ARM: dts: Add wake up key to arndale-octa board
ARM: dts: Add PMIC support to arndale-octa board
ARM: dts: Add fixed voltage regulators to smdk5420
ARM: dts: Add I2S nodes to exynos5420
ARM: dts: Add ADMA node to exynos5420
ARM: dts: Re-organize RTC status for exynos5250
ARM: dts: Re-organize RTC status for exynos5420
ARM: dts: Add regulator entries to smdk5420
ARM: dts: add max77686 pmic node for smdk5250
ARM: dts: update vdd_arm voltage range for exynos4412 based boards
ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 9 Mar 2014 07:19:06 +0000 (23:19 -0800)]
Merge tag 'omap-for-v3.15/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
OMAP device tree changes from Tony Lindgren:
Device tree related changes for omaps with minor code
changes also to platform data quirks that are still needed
for some features.
* tag 'omap-for-v3.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (60 commits)
ARM: dts: omap4+: Add DMM bindings
ARM: dts: am43x-gp-evm: Add matrix gpio keys.
ARM: dts: am43xx: add support for parallel NAND flash
ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
ARM: dts: am335x-evm: NAND: update MTD partition table
ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes
ARM: dts: omap3-gta04: Add bma180 accelerometer
ARM: dts: omap3-gta04: Enable mmc2 for wifi
ARM: dts: omap3-gta04: Add basic sound support
ARM: dts: omap3-gta04: Add twl4030 charger
ARM: dts: omap3-gta04: Add touchscreen properties
ARM: dts: omap3-gta04: Add support for magnetometer
ARM: dts: am437x-gp-evm: Enable gpio.
ARM: dts: am437x-gp-evm: Add pwm backlight support.
ARM: dts: am437x-gp-evm: Add gp dts.
ARM: dts: am43x-epos-evm: Add SPI data.
ARM: dts: am43x-epos-evm: Add I2C2 data.
pinctrl: am43xx: dt-bindings: add MUX_MODE8
ARM: dts: am43x-epos-evm: Add pwm backlight support.
ARM: dts: am4372: Add pwm-cells property for ecap device.
...
Maxime Ripard [Tue, 4 Mar 2014 16:28:41 +0000 (17:28 +0100)]
ARM: sun6i: colombus: Enable the I2C controllers
The A31 Colombus board has 3 I2C controllers that should be usable. However,
the first one is not working for some reason on the hardware I have been able
to test it on, while it should really be the same controller. Enable the i2c1
and i2c2 busses, and mark i2c0 as in failure in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Tue, 4 Mar 2014 16:28:40 +0000 (17:28 +0100)]
ARM: sun6i: Enable the I2C muxing options
The i2c controllers have a few muxing options on the A31. Enable the
ones found in the A31 Colombus board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
projects / firefly-linux-kernel-4.4.55.git / log