firefly-linux-kernel-4.4.55.git
12 years agor8169: csi_ops signature change.
Francois Romieu [Fri, 6 Jul 2012 11:37:00 +0000 (13:37 +0200)]
r8169: csi_ops signature change.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
12 years agor8169: mdio_ops signature change.
Francois Romieu [Fri, 6 Jul 2012 18:19:42 +0000 (20:19 +0200)]
r8169: mdio_ops signature change.

Further changes need more context down in the call stack.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
12 years agor8169: add RTL8106E support.
Hayes Wang [Mon, 2 Jul 2012 09:23:21 +0000 (17:23 +0800)]
r8169: add RTL8106E support.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
12 years agosmall cleanup in ax25_addr_parse()
Dan Carpenter [Wed, 4 Jul 2012 22:27:18 +0000 (22:27 +0000)]
small cleanup in ax25_addr_parse()

The comments were wrong here because "AX25_MAX_DIGIS" is 8 but the
comments say 6.  Also I've changed the "7" to "AX25_ADDR_LEN".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix Endian
Li RongQing [Wed, 4 Jul 2012 16:05:42 +0000 (16:05 +0000)]
be2net: Fix Endian

ETH_P_IP is host Endian, skb->protocol is big Endian, when
compare them, we should change ETH_P_IP from host endian
to big endian, htons, not ntohs.

CC: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobcm87xx: fix reg-init comment typo
Peter Korsgaard [Wed, 4 Jul 2012 05:05:45 +0000 (05:05 +0000)]
bcm87xx: fix reg-init comment typo

broadcom, not marvell.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agophylib: Support registering a bunch of drivers
Christian Hohnstaedt [Wed, 4 Jul 2012 05:44:34 +0000 (05:44 +0000)]
phylib: Support registering a bunch of drivers

If registering of one of them fails, all already registered drivers
of this module will be unregistered.

Use the new register/unregister functions in all drivers
registering more than one driver.

amd.c, realtek.c: Simplify: directly return registration result.

Tested with broadcom.c
All others compile-tested.

Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobcm87xx: disable autonegotiation by default
Peter Korsgaard [Wed, 4 Jul 2012 00:33:57 +0000 (00:33 +0000)]
bcm87xx: disable autonegotiation by default

The bcm87xx phys don't support autonegotiation, so don't use it by
default, as otherwise phy_state_machine() will try to enable it (using
c22 requests, which also don't make any sense for the bcm78xx).

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agosky2: Fix for interrupt handler
Mirko Lindner [Tue, 3 Jul 2012 23:38:46 +0000 (23:38 +0000)]
sky2: Fix for interrupt handler

Re-enable interrupts if it is not our interrupt

Signed-off-by: Mirko Lindner <mlindner@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agosky2: Added support for Optima EEE
Mirko Lindner [Tue, 3 Jul 2012 23:38:41 +0000 (23:38 +0000)]
sky2: Added support for Optima EEE

This patch adds support for the Optima EEE chipset.

Signed-off-by: Mirko Lindner <mlindner@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/macb: manage carrier state with call to netif_carrier_{on|off}()
Nicolas Ferre [Tue, 3 Jul 2012 23:14:13 +0000 (23:14 +0000)]
net/macb: manage carrier state with call to netif_carrier_{on|off}()

OFF carrier state is setup in probe() open() and suspend() functions.
The carrier ON state is managed in macb_handle_link_change().

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agosctp: refactor sctp_packet_append_chunk and clenup some memory leaks
Neil Horman [Mon, 2 Jul 2012 09:59:24 +0000 (09:59 +0000)]
sctp: refactor sctp_packet_append_chunk and clenup some memory leaks

While doing some recent work on sctp sack bundling I noted that
sctp_packet_append_chunk was pretty inefficient.  Specifially, it was called
recursively while trying to bundle auth and sack chunks.  Because of that we
call sctp_packet_bundle_sack and sctp_packet_bundle_auth a total of 4 times for
every call to sctp_packet_append_chunk, knowing that at least 3 of those calls
will do nothing.

So lets refactor sctp_packet_bundle_auth to have an outer part that does the
attempted bundling, and an inner part that just does the chunk appends.  This
saves us several calls per iteration that we just don't need.

Also, noticed that the auth and sack bundling fail to free the chunks they
allocate if the append fails, so make sure we add that in

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: linux-sctp@vger.kernel.org
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2i: use strlcpy() instead of memcpy() for strings
Dan Carpenter [Sat, 30 Jun 2012 01:49:35 +0000 (01:49 +0000)]
bnx2i: use strlcpy() instead of memcpy() for strings

DRV_MODULE_VERSION here is "2.7.2.2" which is only 8 chars but we copy
12 bytes from the stack so it's a small information leak.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next
David S. Miller [Sat, 7 Jul 2012 23:29:29 +0000 (16:29 -0700)]
Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next

12 years agoasix: avoid copies in tx path
Eric Dumazet [Thu, 5 Jul 2012 04:31:01 +0000 (04:31 +0000)]
asix: avoid copies in tx path

I noticed excess calls to skb_copy_expand() or memmove() in asix driver.

This driver needs to push 4 bytes in front of frame (packet_len)
and maybe add 4 bytes after the end (if padlen is 4)

So it should set needed_headroom & needed_tailroom to avoid
copies. But its not enough, because many packets are cloned
before entering asix_tx_fixup() and this driver use skb_cloned()
as a lazy way to check if it can push and put additional bytes in frame.

Avoid skb_copy_expand() expensive call, using following rules :

- We are allowed to push 4 bytes in headroom if skb_header_cloned()
  is false (and if we have 4 bytes of headroom)

- We are allowed to put 4 bytes at tail if skb_cloned()
  is false (and if we have 4 bytes of tailroom)

TCP packets for example are cloned, but skb_header_release()
was called in tcp stack, allowing us to use headroom for our needs.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allan Chou <allan@asix.com.tw>
Cc: Trond Wuellner <trond@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Tested-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_en: Add support for drop action through ethtool
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:50 +0000 (04:03 +0000)]
net/mlx4_en: Add support for drop action through ethtool

The drop action is implemented by allocating a QP and keeping it in a reset state
such that the HW drops any packets which are steered to that QP. When a drop action
is requested, we attach the relevant flow to that QP.

Sign-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_en: Manage flow steering rules with ethtool
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:49 +0000 (04:03 +0000)]
net/mlx4_en: Manage flow steering rules with ethtool

Implement the ethtool APIs for attaching L2/L3/L4 based flow steering
rules to the netdevice RX rings. Added set_rxnfc callback and enhanced
the existing get_rxnfc callback.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4: Implement promiscuous mode with device managed flow-steering
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:48 +0000 (04:03 +0000)]
net/mlx4: Implement promiscuous mode with device managed flow-steering

The device managed flow steering API has three promiscuous modes:

1. Uplink - captures all the packets that arrive to the port.
2. Allmulti - captures all multicast packets arriving to the port.
3. Function port - for future use, this mode is not implemented yet.

Use these modes with the flow_attach and flow_detach firmware commands
according to the promiscuous state of the netdevice.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_core: Add resource tracking for device managed flow steering rules
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:47 +0000 (04:03 +0000)]
net/mlx4_core: Add resource tracking for device managed flow steering rules

As with other device resources, the resource tracker is needed for supporting
device managed flow steering rules under SRIOV: make sure virtual functions
delete only rules created by them, and clean all rules attached by a crashed VF.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago{NET, IB}/mlx4: Add device managed flow steering firmware API
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:46 +0000 (04:03 +0000)]
{NET, IB}/mlx4: Add device managed flow steering firmware API

The driver is modified to support three operation modes.

If supported by firmware use the device managed flow steering
API, that which we call device managed steering mode. Else, if
the firmware supports the B0 steering mode use it, and finally,
if none of the above, use the A0 steering mode.

When the steering mode is device managed, the code is modified
such that L2 based rules set by the mlx4_en driver for Ethernet
unicast and multicast, and the IB stack multicast attach calls
done through the mlx4_ib driver are all routed to use the device
managed API.

When attaching rule using device managed flow steering API,
the firmware returns a 64 bit registration id, which is to be
provided during detach.

Currently the firmware is always programmed during HCA initialization
to use standard L2 hashing. Future work should be done to allow
configuring the flow-steering hash function with common, non
proprietary means.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_core: Add firmware commands to support device managed flow steering
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:45 +0000 (04:03 +0000)]
net/mlx4_core: Add firmware commands to support device managed flow steering

Add support for firmware commands to attach/detach a new device managed
steering mode. Such network steering rules allow the user to provide an
L2/L3/L4 flow specification to the firmware and have the device to steer
traffic that matches that specification to the provided QP.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4: Set steering mode according to device capabilities
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:44 +0000 (04:03 +0000)]
net/mlx4: Set steering mode according to device capabilities

Instead of checking the firmware supported steering mode in various
places in the code, add a dedicated field in the mlx4 device capabilities
structure which is written once during the initialization flow and read
across the code.

This also set the grounds for add new steering modes. Currently two modes
are supported, and are named after the ConnectX HW versions A0 and B0.

A0 steering uses mac_index, vlan_index and priority to steer traffic
into pre-defined range of QPs.

B0 steering uses Ethernet L2 hashing rules and is enabled only
if the firmware supports both unicast and multicast B0 steering,

The current steering modes are relevant for Ethernet traffic only,
such that Infiniband steering remains untouched.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_en: Re-design multicast attachments flow
Yevgeny Petrilin [Thu, 5 Jul 2012 04:03:43 +0000 (04:03 +0000)]
net/mlx4_en: Re-design multicast attachments flow

Currently, for every change in the net device multicast list, the driver
detaches all the addresses from the HW device, and then attaches the
updated list. This behavior is wrong from two aspects: first, it causes
a load of firmware commands and second, there is period of time where
the correct addresses are not attached, which turned into packet loss.

To improve - a copy of the multicast list is saved by the driver. For
every change in the multicast list, the multicast list copy is used
to find the delta between those two lists and add or remove multicast
addresses as needed.

Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_core: Change resource tracking ID to be 64 bit
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:42 +0000 (04:03 +0000)]
net/mlx4_core: Change resource tracking ID to be 64 bit

Currently the IDs used by the resource tracker are of type u32, so far this was
ok since all the different resources we were tracking could be encoded in 32bit.

As a preparation step for tracking of resources whose IDs need > 32 bits such
as network flow steering rules, who are 64 bit in size, move to use 64 bit
based resource IDs.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/mlx4_core: Change resource tracking mechanism to use red-black tree
Hadar Hen Zion [Thu, 5 Jul 2012 04:03:41 +0000 (04:03 +0000)]
net/mlx4_core: Change resource tracking mechanism to use red-black tree

Change the data structure used for managing the SRIOV resource tracking
mechanism from radix tree to red-black tree. This is preparation step
for supporting resource IDs which are 64bit long, such as network flow
steering rules. Such IDs can't be used as radix-tree keys on 32bit
architectures and hence the reason for the change.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'master' of git://1984.lsi.us.es/nf-next
David S. Miller [Sat, 7 Jul 2012 23:18:50 +0000 (16:18 -0700)]
Merge branch 'master' of git://1984.lsi.us.es/nf-next

12 years agor6040: remove duplicate call to the pci_set_drvdata
Devendra Naga [Fri, 6 Jul 2012 20:07:35 +0000 (20:07 +0000)]
r6040: remove duplicate call to the pci_set_drvdata

pci_set_drvdata is called twice at the remove path of driver,
call it once.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: fix a bad cast in ip6_dst_lookup_tail()
Eric Dumazet [Fri, 6 Jul 2012 07:19:05 +0000 (09:19 +0200)]
ipv6: fix a bad cast in ip6_dst_lookup_tail()

Fix a bug in ip6_dst_lookup_tail(), where typeof(dst) is
"struct dst_entry **", not "struct dst_entry *"

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: remove redundant declarations
Eric Dumazet [Thu, 5 Jul 2012 20:34:35 +0000 (20:34 +0000)]
ipv6: remove redundant declarations

remove redundant declarations, they belong in include/net/tcp.h

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: Avoid overhead when no custom FIB rules are installed.
David S. Miller [Fri, 6 Jul 2012 05:13:13 +0000 (22:13 -0700)]
ipv4: Avoid overhead when no custom FIB rules are installed.

If the user hasn't actually installed any custom rules, or fiddled
with the default ones, don't go through the whole FIB rules layer.

It's just pure overhead.

Instead do what we do with CONFIG_IP_MULTIPLE_TABLES disabled, check
the individual tables by hand, one by one.

Also, move fib_num_tclassid_users into the ipv4 network namespace.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipoib: Need to do dst_neigh_lookup_skb() outside of priv->lock.
David S. Miller [Fri, 6 Jul 2012 04:08:05 +0000 (21:08 -0700)]
ipoib: Need to do dst_neigh_lookup_skb() outside of priv->lock.

Otherwise local_bh_enable() complains.

Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: Initialize the neighbour pointer of rt6_info on allocation
Steffen Klassert [Thu, 5 Jul 2012 03:18:28 +0000 (03:18 +0000)]
ipv6: Initialize the neighbour pointer of rt6_info on allocation

git commit 97cac082 (ipv6: Store route neighbour in rt6_info struct)
added a neighbour pointer to rt6_info. Currently we don't initialize
this pointer at allocation time. We assume this pointer to be valid
if it is not a null pointer, so initialize it on allocation.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Thu, 5 Jul 2012 10:44:25 +0000 (03:44 -0700)]
Merge git://git./linux/kernel/git/davem/net

12 years agodrivers/ieee802154/at231rf230: remove unused return status
alex.bluesman.smirnov@gmail.com [Sun, 1 Jul 2012 20:18:32 +0000 (20:18 +0000)]
drivers/ieee802154/at231rf230: remove unused return status

Remove excessive variable used for the return status.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6lowpan: revert 'reuse eth_mac_addr()'
alex.bluesman.smirnov@gmail.com [Sun, 1 Jul 2012 19:58:46 +0000 (19:58 +0000)]
6lowpan: revert 'reuse eth_mac_addr()'

This reverts the commit cdf49c283e2e105da86ca575ad35b453f5ff24ea which
replaces lowpan '.ndo_set_mac_address' method by ethernet's one.

Accorind to the IEEE 802.15.4 standard, device has 8-byte length address,
so this hook loses the last 2 bytes which may rise a compatibility problems
with other IEEE 802.15.4 standard implementations.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agodccp: remove unnecessary codes in ipv6.c
RongQing.Li [Sun, 1 Jul 2012 17:19:00 +0000 (17:19 +0000)]
dccp: remove unnecessary codes in ipv6.c

opt always equals np->opts, so it is meaningless to define opt, and
check if opt does not equal np->opts and then try to free opt.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: remove unnecessary codes in tcp_ipv6.c
RongQing.Li [Sun, 1 Jul 2012 17:18:59 +0000 (17:18 +0000)]
ipv6: remove unnecessary codes in tcp_ipv6.c

opt always equals np->opts, so it is meaningless to define opt, and
check if opt does not equal np->opts and then try to free opt.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:19:00 +0000 (03:19 +0000)]
be2net: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2x: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:59 +0000 (03:18 +0000)]
bnx2x: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:58 +0000 (03:18 +0000)]
bnx2: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agotg3: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:57 +0000 (03:18 +0000)]
tg3: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomyri10ge: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:56 +0000 (03:18 +0000)]
myri10ge: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Jon Mason <mason@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocxgb4: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:55 +0000 (03:18 +0000)]
cxgb4: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocxgb3: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:54 +0000 (03:18 +0000)]
cxgb3: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoqlge: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:53 +0000 (03:18 +0000)]
qlge: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Cc: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agovxge: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:52 +0000 (03:18 +0000)]
vxge: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomlx4: set maximal number of default RSS queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:51 +0000 (03:18 +0000)]
mlx4: set maximal number of default RSS queues

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet-next: Add netif_get_num_default_rss_queues
Yuval Mintz [Sun, 1 Jul 2012 03:18:50 +0000 (03:18 +0000)]
net-next: Add netif_get_num_default_rss_queues

Most multi-queue networking driver consider the number of online cpus when
configuring RSS queues.
This patch adds a wrapper to the number of cpus, setting an upper limit on the
number of cpus a driver should consider (by default) when allocating resources
for his queues.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: defer fib_compute_spec_dst() call
Eric Dumazet [Wed, 4 Jul 2012 22:30:09 +0000 (22:30 +0000)]
ipv4: defer fib_compute_spec_dst() call

ip_options_compile() can avoid calling fib_compute_spec_dst()
by default, and perform the call only if needed.

David suggested to add a helper to make the call only once.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Kill dst->_neighbour, accessors, and final uses.
David S. Miller [Tue, 3 Jul 2012 05:58:02 +0000 (22:58 -0700)]
net: Kill dst->_neighbour, accessors, and final uses.

No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoxfrm: No need to copy generic neighbour pointer.
David S. Miller [Tue, 3 Jul 2012 05:53:37 +0000 (22:53 -0700)]
xfrm: No need to copy generic neighbour pointer.

Nobody reads it any longer.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: No need to set generic neighbour pointer.
David S. Miller [Tue, 3 Jul 2012 08:07:44 +0000 (01:07 -0700)]
ipv4: No need to set generic neighbour pointer.

Nobody reads it any longer.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: Store route neighbour in rt6_info struct.
David S. Miller [Tue, 3 Jul 2012 05:43:47 +0000 (22:43 -0700)]
ipv6: Store route neighbour in rt6_info struct.

This makes for a simplified conversion away from dst_get_neighbour*().

All code outside of ipv6 will use neigh lookups via dst_neigh_lookup*().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocxgb3: Convert t3_l2t_get() over to dst_neigh_lookup().
David S. Miller [Tue, 3 Jul 2012 05:35:31 +0000 (22:35 -0700)]
cxgb3: Convert t3_l2t_get() over to dst_neigh_lookup().

This means passing in a suitable destination address.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Pass neighbours and dest address into NETEVENT_REDIRECT events.
David S. Miller [Tue, 3 Jul 2012 08:01:51 +0000 (01:01 -0700)]
net: Pass neighbours and dest address into NETEVENT_REDIRECT events.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agodecnet: Use neighbours privately in dn_route struct.
David S. Miller [Tue, 3 Jul 2012 05:22:18 +0000 (22:22 -0700)]
decnet: Use neighbours privately in dn_route struct.

This allows an easy conversion away from dst_get_neighbour*().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoneigh: Convert over to dst_neigh_lookup_skb().
David S. Miller [Tue, 3 Jul 2012 05:15:37 +0000 (22:15 -0700)]
neigh: Convert over to dst_neigh_lookup_skb().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobr_netfilter: Convert to dst_neigh_lookup_skb().
David S. Miller [Tue, 3 Jul 2012 05:12:59 +0000 (22:12 -0700)]
br_netfilter: Convert to dst_neigh_lookup_skb().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocxgb4i: Convert over to dst_neigh_lookup().
David S. Miller [Tue, 3 Jul 2012 05:10:55 +0000 (22:10 -0700)]
cxgb4i: Convert over to dst_neigh_lookup().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocxgbi: Convert over to dst_neigh_lookup().
David S. Miller [Tue, 3 Jul 2012 05:08:58 +0000 (22:08 -0700)]
cxgbi: Convert over to dst_neigh_lookup().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoqeth: Convert over to dst_neigh_lookup_skb().
David S. Miller [Tue, 3 Jul 2012 05:02:33 +0000 (22:02 -0700)]
qeth: Convert over to dst_neigh_lookup_skb().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipoib: Convert over to dev_lookup_neigh_skb().
David S. Miller [Tue, 3 Jul 2012 05:00:03 +0000 (22:00 -0700)]
ipoib: Convert over to dev_lookup_neigh_skb().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agosch_teql: Convert over to dev_neigh_lookup_skb().
David S. Miller [Tue, 3 Jul 2012 04:57:45 +0000 (21:57 -0700)]
sch_teql: Convert over to dev_neigh_lookup_skb().

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Add optional SKB arg to dst_ops->neigh_lookup().
David S. Miller [Tue, 3 Jul 2012 04:52:24 +0000 (21:52 -0700)]
net: Add optional SKB arg to dst_ops->neigh_lookup().

Causes the handler to use the daddr in the ipv4/ipv6 header when
the route gateway is unspecified (local subnet).

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Do delayed neigh confirmation.
David S. Miller [Mon, 2 Jul 2012 09:21:03 +0000 (02:21 -0700)]
net: Do delayed neigh confirmation.

When a dst_confirm() happens, mark the confirmation as pending in the
dst.  Then on the next packet out, when we have the neigh in-hand, do
the update.

This removes the dependency in dst_confirm() of dst's having an
attached neigh.

While we're here, remove the explicit 'dst' NULL check, all except 2
or 3 call sites ensure it's not NULL.  So just fix those cases up.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agosunrpc: Don't do a dst_confirm() on an input routes.
David S. Miller [Mon, 2 Jul 2012 09:15:37 +0000 (02:15 -0700)]
sunrpc: Don't do a dst_confirm() on an input routes.

xs_udp_data_ready() is operating on received packets, and tries to
do a dst_confirm() on the dst attached to the SKB.

This isn't right, dst confirmation is for output routes, not input
rights.  It's for resetting the timers on the nexthop neighbour entry
for the route, indicating that we've got good evidence that we've
successfully reached it.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: Don't report neigh uptodate state in rtcache procfs.
David S. Miller [Mon, 2 Jul 2012 09:04:13 +0000 (02:04 -0700)]
ipv4: Don't report neigh uptodate state in rtcache procfs.

Soon routes will not have a cached neigh attached, nor will we
be able to necessarily go directly to a neigh from an arbitrary
route.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: Make neigh lookups directly in output packet path.
David S. Miller [Mon, 2 Jul 2012 09:02:15 +0000 (02:02 -0700)]
ipv4: Make neigh lookups directly in output packet path.

Do not use the dst cached neigh, we'll be getting rid of that.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: Fix crashes in ip_options_compile().
David S. Miller [Wed, 4 Jul 2012 23:13:17 +0000 (16:13 -0700)]
ipv4: Fix crashes in ip_options_compile().

The spec_dst uses should be guarded by skb_rtable() being non-NULL
not just the SKB being non-null.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonetfilter: nfnetlink_queue: do not allow to set unsupported flag bits
Krishna Kumar [Wed, 27 Jun 2012 00:59:56 +0000 (00:59 +0000)]
netfilter: nfnetlink_queue: do not allow to set unsupported flag bits

Allow setting of only supported flag bits in queue->flags.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
12 years agonetfilter: nfnetlink: check callbacks before using those in nfnetlink_rcv_msg
Tomasz Bursztyka [Thu, 28 Jun 2012 02:57:47 +0000 (02:57 +0000)]
netfilter: nfnetlink: check callbacks before using those in nfnetlink_rcv_msg

nfnetlink_rcv_msg() might call a NULL callback which will cause NULL pointer
dereference.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
12 years agonetfilter: nf_ct_tcp: missing per-net support for cttimeout
Pablo Neira Ayuso [Fri, 29 Jun 2012 05:23:25 +0000 (05:23 +0000)]
netfilter: nf_ct_tcp: missing per-net support for cttimeout

This patch adds missing per-net support for the cttimeout
infrastructure to TCP.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
12 years agonetfilter: nf_conntrack: generalize nf_ct_l4proto_net
Pablo Neira Ayuso [Fri, 29 Jun 2012 05:23:24 +0000 (05:23 +0000)]
netfilter: nf_conntrack: generalize nf_ct_l4proto_net

This patch generalizes nf_ct_l4proto_net by splitting it into chunks and
moving the corresponding protocol part to where it really belongs to.

To clarify, note that we follow two different approaches to support per-net
depending if it's built-in or run-time loadable protocol tracker.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
12 years agonet: em_canid: Ematch rule to match CAN frames according to their identifiers
Rostislav Lisovy [Wed, 4 Jul 2012 03:32:03 +0000 (05:32 +0200)]
net: em_canid: Ematch rule to match CAN frames according to their identifiers

This ematch makes it possible to classify CAN frames (AF_CAN) according
to their identifiers. This functionality can not be easily achieved with
existing classifiers, such as u32, because CAN identifier is always stored
in native endianness, whereas u32 expects Network byte order.

Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
12 years agoMerge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Linus Torvalds [Wed, 4 Jul 2012 01:06:49 +0000 (18:06 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull fix to common clk framework from Michael Turquette:
 "The previous set of common clk fixes for -rc5 left an uninitialized
  int which could lead to bad array indexing when switching clock
  parents.  The issue is fixed with a trivial change to the code flow in
  __clk_set_parent."

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: fix parent validation in __clk_set_parent()

12 years agoMerge tag 'md-3.5-fixes' of git://neil.brown.name/md
Linus Torvalds [Wed, 4 Jul 2012 01:05:35 +0000 (18:05 -0700)]
Merge tag 'md-3.5-fixes' of git://neil.brown.name/md

Pull raid10 build failure fix from NeilBrown:
 "I really shouldn't do important things late in the day.  It seems that
  I get careless."

* tag 'md-3.5-fixes' of git://neil.brown.name/md:
  md/raid10: fix careless build error

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 4 Jul 2012 01:01:54 +0000 (18:01 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking update from David Miller:

 1) Fix RX sequence number handling in mwifiex, from Stone Piao.

 2) Netfilter ipset mis-compares device names, fix from Florian
    Westphal.

 3) Fix route leak in ipv6 IPVS, from Eric Dumazet.

 4) NFS fixes.  Several buffer overflows in NCI layer from Dan
    Rosenberg, and release sock OOPS'er fix from Eric Dumazet.

 5) Fix WEP handling ath9k, we started using a bit the chip provides to
    indicate undecrypted packets but that bit turns out to be unreliable
    in certain configurations.  Fix from Felix Fietkau.

 6) Fix Kconfig dependency bug in wlcore, from Randy Dunlap.

 7) New USB IDs for rtlwifi driver from Larry Finger.

 8) Fix crashes in qmi_wwan usbnet driver when disconnecting, from Bjørn
    Mork.

 9) Gianfar driver programs coalescing settings properly in single queue
    mode, but does not do so in multi-queue mode.  Fix from Claudiu
    Manoil.

10) Missing module.h include in davinci_cpdma.c, from Daniel Mack.

11) Need dummy handler for IPSET_CMD_NONE otherwise we crash in ipset if
    we get this via nfnetlink, fix from Tomasz Bursztyka.

12) Missing RCU unlock in nfnetlink error path, also from Tomasz.

13) Fix divide by zero in igbvf when the user tries to set an RX
    coalescing value of 0 usecs, from Mitch A Williams.

14) We can process SCTP sacks for the wrong transport, oops.  Fix from
    Neil Horman.

15) Remove hw IP payload checksumming from e1000e driver.  This has zery
    value in our stack, and turning it on creates a very unintuitive
    restriction for users when using jumbo MTUs.

    Specifically, when IP payload checksums are on you cannot use both
    receive hashing offload and jumbo MTU.  Fix from Bruce Allan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  e1000e: remove use of IP payload checksum
  sctp: be more restrictive in transport selection on bundled sacks
  igbvf: fix divide by zero
  netfilter: nfnetlink: fix missing rcu_read_unlock in nfnetlink_rcv_msg
  netfilter: ipset: fix crash if IPSET_CMD_NONE command is sent
  davinci_cpdma: include linux/module.h
  gianfar: Fix RXICr/TXICr programming for multi-queue mode
  net: Downgrade CAP_SYS_MODULE deprecated message from error to warning.
  net: qmi_wwan: fix Oops while disconnecting
  mwifiex: fix memory leak associated with IE manamgement
  ath9k: fix panic caused by returning a descriptor we have queued for reuse
  mac80211: correct behaviour on unrecognised action frames
  ath9k: enable serialize_regmode for non-PCIE AR9287
  rtlwifi: rtl8192cu: New USB IDs
  NFC: Return from rawsock_release when sk is NULL
  iwlwifi: fix activating inactive stations
  wlcore: drop INET dependency
  ath9k: fix dynamic WEP related regression
  NFC: Prevent multiple buffer overflows in NCI
  netfilter: update location of my trees
  ...

12 years agomd/raid10: fix careless build error
NeilBrown [Tue, 3 Jul 2012 23:35:35 +0000 (09:35 +1000)]
md/raid10: fix careless build error

build error introduced by commit b357f04a67c2aeee8

That function doesn't get extra args until a later patch.  Bother.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Reported-by: Simon Kirby <sim@hostway.ca>
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: NeilBrown <neilb@suse.de>
12 years agofloppy: cancel any pending fd_timeouts before adding a new one
Linus Torvalds [Tue, 3 Jul 2012 22:51:22 +0000 (15:51 -0700)]
floppy: cancel any pending fd_timeouts before adding a new one

In commit 070ad7e793dc ("floppy: convert to delayed work and
single-thread wq") the 'fd_timeout' timer was converted to a delayed
work.  However, the "del_timer(&fd_timeout)" was lost in the process,
and any previous pending timeouts would stay active when we then
re-queued the timeout.

This resulted in the floppy probe sequence having a (stale) 20s timeout
rather than the intended 3s timeout, and thus made booting with the
floppy driver (but no actual floppy controller) take much longer than it
should.

Of course, there's little reason for most people to compile the floppy
driver into the kernel at all, which is why most people never noticed.

Canceling the delayed work where we used to do the del_timer() fixes the
issue, and makes the floppy probing use the proper new timeout instead.
The three second timeout is still very wasteful, but better than the 20s
one.

Reported-and-tested-by: Andi Kleen <ak@linux.intel.com>
Reported-and-tested-by: Calvin Walton <calvin.walton@kepstin.ca>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Tue, 3 Jul 2012 22:45:10 +0000 (15:45 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block bits from Jens Axboe:
 "As vacation is coming up, thought I'd better get rid of my pending
  changes in my for-linus branch for this iteration.  It contains:

   - Two patches for mtip32xx.  Killing a non-compliant sysfs interface
     and moving it to debugfs, where it belongs.

   - A few patches from Asias.  Two legit bug fixes, and one killing an
     interface that is no longer in use.

   - A patch from Jan, making the annoying partition ioctl warning a bit
     less annoying, by restricting it to !CAP_SYS_RAWIO only.

   - Three bug fixes for drbd from Lars Ellenberg.

   - A fix for an old regression for umem, it hasn't really worked since
     the plugging scheme was changed in 3.0.

   - A few fixes from Tejun.

   - A splice fix from Eric Dumazet, fixing an issue with pipe
     resizing."

* 'for-linus' of git://git.kernel.dk/linux-block:
  scsi: Silence unnecessary warnings about ioctl to partition
  block: Drop dead function blk_abort_queue()
  block: Mitigate lock unbalance caused by lock switching
  block: Avoid missed wakeup in request waitqueue
  umem: fix up unplugging
  splice: fix racy pipe->buffers uses
  drbd: fix null pointer dereference with on-congestion policy when diskless
  drbd: fix list corruption by failing but already aborted reads
  drbd: fix access of unallocated pages and kernel panic
  xen/blkfront: Add WARN to deal with misbehaving backends.
  blkcg: drop local variable @q from blkg_destroy()
  mtip32xx: Create debugfs entries for troubleshooting
  mtip32xx: Remove 'registers' and 'flags' from sysfs
  blkcg: fix blkg_alloc() failure path
  block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
  block: fix return value on cfq_init() failure
  mtip32xx: Remove version.h header file inclusion
  xen/blkback: Copy id field when doing BLKIF_DISCARD.

12 years agoclk: fix parent validation in __clk_set_parent()
Rajendra Nayak [Tue, 3 Jul 2012 06:41:41 +0000 (12:11 +0530)]
clk: fix parent validation in __clk_set_parent()

The below commit introduced a bug in __clk_set_parent()
which could cause it to *skip* the parent validation
which makes sure the parent passed to the api is a valid
one.

    commit 7975059db572eb47f0fb272a62afeae272a4b209
    Author: Rajendra Nayak <rnayak@ti.com>
    Date:   Wed Jun 6 14:41:31 2012 +0530

        clk: Allow late cache allocation for clk->parents

This was identified by the following compiler warning..

    drivers/clk/clk.c: In function '__clk_set_parent':
    drivers/clk/clk.c:1083:5: warning: 'i' may be used uninitialized in this function [-Wuninitialized]

.. as reported by Marc Kleine-Budde.

There were various options discussed on how to fix this, one
being initing 'i' to clk->num_parents, but the below approach
was found to be more appropriate as it also makes the 'parent
validation' code simpler to read.

Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org
12 years agoMerge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Tue, 3 Jul 2012 18:10:18 +0000 (11:10 -0700)]
Merge tag 'sound-3.5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a few driver-specific fixes for ASoC and HD-audio."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix no sound from ALC662 after Windows reboot
  ASoC: tlv320aic3x: Fix codec pll configure bug
  ASoC: wm2200: Add missing BCLK rate

12 years agoMerge tag 'dm-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Linus Torvalds [Tue, 3 Jul 2012 18:08:16 +0000 (11:08 -0700)]
Merge tag 'dm-3.5-fixes' of git://git./linux/kernel/git/agk/linux-dm

Pull device-mapper fixes from Alasdair G Kergon:
 "Four minor thin provisioning fixes and correct and update dm-verity
  documentation."

* tag 'dm-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: verity fix documentation
  dm persistent data: fix allocation failure in space map checker init
  dm persistent data: handle space map checker creation failure
  dm persistent data: fix shadow_info_leak on dm_tm_destroy
  dm thin: commit metadata before creating metadata snapshot

12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Tue, 3 Jul 2012 17:59:37 +0000 (10:59 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "One regression fix, two radeon fixes (one for an oops), and an i915
  fix to unload framebuffers earlier.

  We originally were going to leave the i915 fix until -next, but grub2
  in some situations causes vesafb/efifb to be loaded now, and this
  causes big slowdowns, and I have reports in rawhide I'd like to have
  fixed."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: kick any firmware framebuffers before claiming the gtt
  drm: edid: Don't add inferred modes with higher resolution
  drm/radeon: fix rare segfault
  drm/radeon: fix VM page table setup on SI

12 years agoMerge tag 'md-3.5-fixes' of git://neil.brown.name/md
Linus Torvalds [Tue, 3 Jul 2012 17:40:43 +0000 (10:40 -0700)]
Merge tag 'md-3.5-fixes' of git://neil.brown.name/md

Pull md fixes from NeilBrown:
 "md: collection of bug fixes for 3.5

  You go away for 2 weeks vacation and what do you get when you come
  back? Piles of bugs :-)

  Some found by inspection, some by testing, some during use in the
  field, and some while developing for the next window..."

* tag 'md-3.5-fixes' of git://neil.brown.name/md:
  md: fix up plugging (again).
  md: support re-add of recovering devices.
  md/raid1: fix bug in read_balance introduced by hot-replace
  raid5: delayed stripe fix
  md/raid456: When read error cannot be recovered, record bad block
  md: make 'name' arg to md_register_thread non-optional.
  md/raid10: fix failure when trying to repair a read error.
  md/raid5: fix refcount problem when blocked_rdev is set.
  md:Add blk_plug in sync_thread.
  md/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdev
  md/raid5: Do not add data_offset before call to is_badblock
  md/raid5: prefer replacing failed devices over want-replacement devices.
  md/raid10: Don't try to recovery unmatched (and unused) chunks.

12 years agoMerge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 3 Jul 2012 17:39:40 +0000 (10:39 -0700)]
Merge branch 'for-linus2' of git://git./linux/kernel/git/jmorris/linux-security

Pull security layer fixes from James Morris.

A documentation update, and a nommu build fix.

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: Fix nommu build.
  security: document no_new_privs

12 years agodm: verity fix documentation
Milan Broz [Tue, 3 Jul 2012 11:55:41 +0000 (12:55 +0100)]
dm: verity fix documentation

Veritysetup is now part of cryptsetup package.
Remove on-disk header description (which is not parsed in kernel)
and point users to cryptsetup where it the format is documented.
Mention units for block size paramaters.
Fix target line specification and dmsetup parameters.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm persistent data: fix allocation failure in space map checker init
Mike Snitzer [Tue, 3 Jul 2012 11:55:37 +0000 (12:55 +0100)]
dm persistent data: fix allocation failure in space map checker init

If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and memory is fragmented and a
sufficiently-large metadata device is used in a thin pool then the space
map checker will fail to allocate the memory it requires.

Switch from kmalloc to vmalloc to allow larger virtually contiguous
allocations for the space map checker's internal count arrays.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm persistent data: handle space map checker creation failure
Mike Snitzer [Tue, 3 Jul 2012 11:55:35 +0000 (12:55 +0100)]
dm persistent data: handle space map checker creation failure

If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and dm_sm_checker_create()
fails, dm_tm_create_internal() would still return success even though it
cleaned up all resources it was supposed to have created.  This will
lead to a kernel crash:

general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
...
RIP: 0010:[<ffffffff81593659>]  [<ffffffff81593659>] dm_bufio_get_block_size+0x9/0x20
Call Trace:
  [<ffffffff81599bae>] dm_bm_block_size+0xe/0x10
  [<ffffffff8159b8b8>] sm_ll_init+0x78/0xd0
  [<ffffffff8159c1a6>] sm_ll_new_disk+0x16/0xa0
  [<ffffffff8159c98e>] dm_sm_disk_create+0xfe/0x160
  [<ffffffff815abf6e>] dm_pool_metadata_open+0x16e/0x6a0
  [<ffffffff815aa010>] pool_ctr+0x3f0/0x900
  [<ffffffff8158d565>] dm_table_add_target+0x195/0x450
  [<ffffffff815904c4>] table_load+0xe4/0x330
  [<ffffffff815917ea>] ctl_ioctl+0x15a/0x2c0
  [<ffffffff81591963>] dm_ctl_ioctl+0x13/0x20
  [<ffffffff8116a4f8>] do_vfs_ioctl+0x98/0x560
  [<ffffffff8116aa51>] sys_ioctl+0x91/0xa0
  [<ffffffff81869f52>] system_call_fastpath+0x16/0x1b

Fix the space map checker code to return an appropriate ERR_PTR and have
dm_sm_disk_create() and dm_tm_create_internal() check for it with
IS_ERR.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm persistent data: fix shadow_info_leak on dm_tm_destroy
Mike Snitzer [Tue, 3 Jul 2012 11:55:33 +0000 (12:55 +0100)]
dm persistent data: fix shadow_info_leak on dm_tm_destroy

Cleanup the shadow table before destroying the transaction manager.

Reference: leak was identified with kmemleak when running
test_discard_random_sectors in the thinp-test-suite.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm thin: commit metadata before creating metadata snapshot
Joe Thornber [Tue, 3 Jul 2012 11:55:31 +0000 (12:55 +0100)]
dm thin: commit metadata before creating metadata snapshot

Userland sometimes sees a corrupt metadata block if metadata is changing
rapidly when a metadata snapshot is reserved for userland,  To make the
problem go away, commit before we take the metadata snapshot (which is a
sensible thing to do anyway).

The checksums mean userland spots this corruption immediately so there's
no risk of acting on incorrect data.  No corruption exists from the
kernel's point of view, and thin_check passes after pool shutdown.

I believe this is to do with shared blocks at the first level of the
{device, mapping} btree.  Prior to the metadata-snap support no sharing
at this level was possible, so this patch is only required after commit
cc8394d86f045b86ff303d3c9e4ce47d97148951 ("dm thin: provide userspace
access to pool metadata").

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agosecurity: Fix nommu build.
Paul Mundt [Mon, 2 Jul 2012 05:34:11 +0000 (14:34 +0900)]
security: Fix nommu build.

The security + nommu configuration presently blows up with an undefined
reference to BDI_CAP_EXEC_MAP:

security/security.c: In function 'mmap_prot':
security/security.c:687:36: error: dereferencing pointer to incomplete type
security/security.c:688:16: error: 'BDI_CAP_EXEC_MAP' undeclared (first use in this function)
security/security.c:688:16: note: each undeclared identifier is reported only once for each function it appears in

include backing-dev.h directly to fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
12 years agodrm/i915: kick any firmware framebuffers before claiming the gtt
Daniel Vetter [Sun, 1 Jul 2012 15:09:42 +0000 (17:09 +0200)]
drm/i915: kick any firmware framebuffers before claiming the gtt

Especially vesafb likes to map everything as uc- (yikes), and if that
mapping hangs around still while we try to map the gtt as wc the
kernel will downgrade our request to uc-, resulting in abyssal
performance.

Unfortunately we can't do this as early as readon does (i.e. as the
first thing we do when initializing the hw) because our fb/mmio space
region moves around on a per-gen basis. So I've had to move it below
the gtt initialization, but that seems to work, too. The important
thing is that we do this before we set up the gtt wc mapping.

Now an altogether different question is why people compile their
kernels with vesafb enabled, but I guess making things just work isn't
bad per se ...

v2:
- s/radeondrmfb/inteldrmfb/
- fix up error handling

v3: Kill #ifdef X86, this is Intel after all. Noticed by Ben Widawsky.

v4: Jani Nikula complained about the pointless bool primary
initialization.

v5: Don't oops if we can't allocate, noticed by Chris Wilson.

v6: Resolve conflicts with agp rework and fixup whitespace.

This is commit e188719a2891f01b3100d in drm-next.

Backport to 3.5 -fixes queue requested by Dave Airlie - due to grub
using vesa on fedora their initrd seems to load vesafb before loading
the real kms driver. So tons more people actually experience a
dead-slow gpu. Hence also the Cc: stable.

Cc: stable@vger.kernel.org
Reported-and-tested-by: "Kilarski, Bernard R" <bernard.r.kilarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm: edid: Don't add inferred modes with higher resolution
Takashi Iwai [Tue, 3 Jul 2012 09:22:11 +0000 (11:22 +0200)]
drm: edid: Don't add inferred modes with higher resolution

When a monitor EDID doesn't give the preferred bit, driver assumes
that the mode with the higest resolution and rate is the preferred
mode.  Meanwhile the recent changes for allowing more modes in the
GFT/CVT ranges give actually more modes, and some modes may be over
the native size.  Thus such a mode would be picked up as the preferred
mode although it's no native resolution.

For avoiding such a problem, this patch limits the addition of
inferred modes by checking not to be greater than other modes.
Also, it checks the duplicated mode entry at the same time.

Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: fix rare segfault
Jerome Glisse [Mon, 2 Jul 2012 16:40:54 +0000 (12:40 -0400)]
drm/radeon: fix rare segfault

In gem idle/busy ioctl the radeon object was derefenced after
drm_gem_object_unreference_unlocked which in case the object
have been destroyed lead to use of a possibly free pointer with
possibly wrong data.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agomd: fix up plugging (again).
NeilBrown [Tue, 3 Jul 2012 07:45:31 +0000 (17:45 +1000)]
md: fix up plugging (again).

The value returned by "mddev_check_plug" is only valid until the
next 'schedule' as that will unplug things.  This could happen at any
call to mempool_alloc.
So just calling mddev_check_plug at the start doesn't really make
sense.

So call it just before, or just after, queuing things for the thread.
As the action that happens at unplug is to wake the thread, this makes
lots of sense.
If we cannot add a plug (which requires a small GFP_ATOMIC alloc) we
wake thread immediately.

RAID5 is a bit different.  Requests are queued for the thread and the
thread is woken by release_stripe.  So we don't need to wake the
thread on failure.
However the thread doesn't perform certain actions when there is any
active plug, so it is important to install a plug before waking the
thread.  So for RAID5 we install the plug *before* queuing the request
and waking the thread.

Without this patch it is possible for raid1 or raid10 to queue a
request without then waking the thread, resulting in the array locking
up.

Also change raid10 to only flush_pending_write when there are not
active plugs, just like raid1.

This patch is suitable for 3.0 or later.  I plan to submit it to
-stable, but I'll like to let it spend a few weeks in mainline
first to be sure it is completely safe.

Signed-off-by: NeilBrown <neilb@suse.de>
12 years agocan: flexcan: add hardware controller version support
Hui Wang [Thu, 28 Jun 2012 08:21:35 +0000 (16:21 +0800)]
can: flexcan: add hardware controller version support

At least in the i.MX series, the flexcan contrller divides into ver_3
and ver_10, current driver is for ver_3 controller.

i.MX6 has ver_10 controller, it has more reigsters than ver_3 has.
The rxfgmask (Rx FIFO Global Mask) register is one of the new added.
Its reset value is 0xffffffff, this means ID Filter Table must be
checked when receive a packet, but the driver is designed to accept
everything during the chip start, we need to clear this register to
follow this design.

Use the data entry of the struct of_device_id to point chip specific
info, we can set hardware version for each platform.

Cc: linux-can@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
[mkl: add id_table support]
Tested-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
12 years agomd: support re-add of recovering devices.
NeilBrown [Tue, 3 Jul 2012 05:59:06 +0000 (15:59 +1000)]
md: support re-add of recovering devices.

We currently only allow a device to be re-added if it appear to be
in-sync.  This is overly restrictive as it may be desirable to re-add
a device that is in the middle of recovery.

So remove the test for "InSync" - the test on rdev->raid_disk is
sufficient to ensure that the re-add will succeed.

Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Tested-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
12 years agomd/raid1: fix bug in read_balance introduced by hot-replace
NeilBrown [Tue, 3 Jul 2012 05:58:42 +0000 (15:58 +1000)]
md/raid1: fix bug in read_balance introduced by hot-replace

When we added hot_replace we doubled the number of devices
that could be in a RAID1 array.  So we doubled how far read_balance
would search.  Unfortunately we didn't double the point at which
it looped back to the beginning - so it effectively loops over
all non-replacement disks twice.
This doesn't cause bad behaviour, but it pointless and means we
never read from replacement devices.

Signed-off-by: NeilBrown <neilb@suse.de>
12 years agoraid5: delayed stripe fix
Shaohua Li [Tue, 3 Jul 2012 05:57:19 +0000 (15:57 +1000)]
raid5: delayed stripe fix

There isn't locking setting STRIPE_DELAYED and STRIPE_PREREAD_ACTIVE bits, but
the two bits have relationship. A delayed stripe can be moved to hold list only
when preread active stripe count is below IO_THRESHOLD. If a stripe has both
the bits set, such stripe will be in delayed list and preread count not 0,
which will make such stripe never leave delayed list.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>