Thomas Gleixner [Wed, 23 Mar 2011 21:08:53 +0000 (21:08 +0000)]
MIPS: JZ4740: Convert to new irq functions
Convert the JZ4740 intc and gpio irq chips to use newstyle irq functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2181/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:52 +0000 (21:08 +0000)]
MIPS: JAZZ: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:51 +0000 (21:08 +0000)]
MIPS: EMMA: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2179/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:51 +0000 (21:08 +0000)]
MIPS: DEC: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2178/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:47 +0000 (21:08 +0000)]
MIPS: bcm63xx: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2176/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:47 +0000 (21:08 +0000)]
MIPS: ath79: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2175/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:46 +0000 (21:08 +0000)]
MIPS: AR7: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2174/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Thomas Gleixner [Wed, 23 Mar 2011 21:08:44 +0000 (21:08 +0000)]
MIPS: Alchemy: Convert to new irq chip functions
Fix the deadlock in set_type() while at it:
The code called set_irq_chip_and_handler_name() resp. set_irq_chip()
from the set_type() callback. That only works on UP and lock debugging
disabled. Otherwise it would dead lock on desc->lock.
__irq_set_chip_handler_name_locked() avoids that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2173/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Tue, 25 Jan 2011 08:23:17 +0000 (13:53 +0530)]
MIPS: MSP71xx: Add CPU feature override file.
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2045/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Tue, 25 Jan 2011 17:54:09 +0000 (23:24 +0530)]
MIPS: MSP71xx: Platform support for On-chip MSP ethernet devices.
Some of MSP family SoC's come with legacy 100Mbps mspeth while some comes
with newer Gigabit TSMAC.Following patch adds platform support for both
types of MAC's.
If TSMAC is not selected assume platform having legacy mspeth. Add
gpio_macros as well which is required for resetting the PHY.
[Ralf: Killed all typedefs.]
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Tue, 25 Jan 2011 08:22:05 +0000 (13:52 +0530)]
MIPS: MSP71xx: Platform support for MSP on-chip USB controller.
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: Anoop P A <anoop.pa@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/2043/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Tue, 25 Jan 2011 08:21:03 +0000 (13:51 +0530)]
MIPS: MSP71xx: Add VSMP/SMTC support.
[Ralf: Fixed more checkpatch assertions and inclusion of unnecessary header
<linux/sched.h>.]
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2042/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Tue, 25 Jan 2011 08:20:10 +0000 (13:50 +0530)]
MIPS: MSP71xx: Add vectored interrupt support.
This patch will add vectored interrupt setups required for MIPS MT modes.
irq_cic has been restructured and moved per irq handler to different file.
irq_cic has been re wrote to support mips MT modes ( VSMP / SMTC )
[Ralf: fixed some more checkpatch warnings.]
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
To: dhowells@redhat.com
Patchwork: https://patchwork.linux-mips.org/patch/2041/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Anoop P A [Tue, 25 Jan 2011 18:08:16 +0000 (23:38 +0530)]
MIPS: MSP71xx: Set up MSP VPE1 timer.
VPE1 timer will be required for VSMP / SMTC.
[Ralf: Fixed a bunch of issues raised by checkpatch.]
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2049/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 25 Mar 2011 17:45:13 +0000 (18:45 +0100)]
MIPS: SMTC: Move declaration of smtc_init_secondary to <asm/smtc.h>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 25 Mar 2011 17:45:13 +0000 (18:45 +0100)]
MIPS: Remove useless initialization.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 25 Mar 2011 17:45:13 +0000 (18:45 +0100)]
MIPS: Microoptimize arch_{read,write}_lock
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
FUJITA Tomonori [Fri, 3 Sep 2010 00:49:12 +0000 (09:49 +0900)]
MIPS: Enable ARCH_DMA_ADDR_T_64BIT if (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
To: akpm@linux-foundation.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1566/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Fri, 25 Mar 2011 17:03:28 +0000 (10:03 -0700)]
Merge branch 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (28 commits)
Cleanup XDR parsing for LAYOUTGET, GETDEVICEINFO
NFSv4.1 convert layoutcommit sync to boolean
NFSv4.1 pnfs_layoutcommit_inode fixes
NFS: Determine initial mount security
NFS: use secinfo when crossing mountpoints
NFS: Add secinfo procedure
NFS: lookup supports alternate client
NFS: convert call_sync() to a function
NFSv4.1 remove temp code that prevented ds commits
NFSv4.1: layoutcommit
NFSv4.1: filelayout driver specific code for COMMIT
NFSv4.1: remove GETATTR from ds commits
NFSv4.1: add generic layer hooks for pnfs COMMIT
NFSv4.1: alloc and free commit_buckets
NFSv4.1: shift filelayout_free_lseg
NFSv4.1: pull out code from nfs_commit_release
NFSv4.1: pull error handling out of nfs_commit_list
NFSv4.1: add callback to nfs4_commit_done
NFSv4.1: rearrange nfs_commit_rpcsetup
NFSv4.1: don't send COMMIT to ds for data sync writes
...
Linus Torvalds [Fri, 25 Mar 2011 16:57:40 +0000 (09:57 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
ext4: fix a BUG in mb_mark_used during trim.
ext4: unused variables cleanup in fs/ext4/extents.c
ext4: remove redundant set_buffer_mapped() in ext4_da_get_block_prep()
ext4: add more tracepoints and use dev_t in the trace buffer
ext4: don't kfree uninitialized s_group_info members
ext4: add missing space in printk's in __ext4_grp_locked_error()
ext4: add FITRIM to compat_ioctl.
ext4: handle errors in ext4_clear_blocks()
ext4: unify the ext4_handle_release_buffer() api
ext4: handle errors in ext4_rename
jbd2: add COW fields to struct jbd2_journal_handle
jbd2: add the b_cow_tid field to journal_head struct
ext4: Initialize fsync transaction ids in ext4_new_inode()
ext4: Use single thread to perform DIO unwritten convertion
ext4: optimize ext4_bio_write_page() when no extent conversion is needed
ext4: skip orphan cleanup if fs has unknown ROCOMPAT features
ext4: use the nblocks arg to ext4_truncate_restart_trans()
ext4: fix missing iput of root inode for some mount error paths
ext4: make FIEMAP and delayed allocation play well together
ext4: suppress verbose debugging information if malloc-debug is off
...
Fi up conflicts in fs/ext4/super.c due to workqueue changes
Jonathan Corbet [Fri, 25 Mar 2011 16:42:17 +0000 (10:42 -0600)]
docs: fix dev_debug() braino in dynamic-debug-howto.txt
While looking at dynamic-debug-howto.txt, I noticed that it references
dev_debug() (which doesn't exist) instead of dev_dbg() (which does
exist). I'm lazy, so I choose to fix the document rather than changing
every dev_dbg() call.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Fri, 25 Mar 2011 16:36:35 +0000 (09:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix issue with calling blk_stop_queue() from the request_fn handler
block: fix bug with inserting flush requests as sort/merge
Thomas Gleixner [Fri, 25 Mar 2011 15:48:50 +0000 (16:48 +0100)]
genirq: Expand generic show_interrupts()
Some archs want to print extra information for certain irq_chips which
is per irq and not per chip. Allow them to provide a chip callback to
print the chip name and the extra information.
PowerPC wants to print the LEVEL/EDGE type information. Make it configurable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jens Axboe [Fri, 25 Mar 2011 15:58:59 +0000 (16:58 +0100)]
block: fix issue with calling blk_stop_queue() from the request_fn handler
When the queue work handler was converted to delayed work, the
stopping was inadvertently made sync as well. Change this back
to being async stop, using __cancel_delayed_work() instead of
cancel_delayed_work().
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Jens Axboe [Fri, 25 Mar 2011 15:57:52 +0000 (16:57 +0100)]
block: fix bug with inserting flush requests as sort/merge
With the introduction of the on-stack plugging, we would assume
that any request being inserted was a normal file system request.
As flush/fua requires a special insert mode, this caused problems.
Fix this up by checking for this in flush_plug_list() and use
the appropriate insert mechanism.
Big thanks goes to Markus Tripplesdorf for tirelessly testing
patches, and to Sergey Senozhatsky for helping find the real
issue.
Reported-by: Markus Tripplesdorf <markus@trippelsdorf.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Artem Bityutskiy [Fri, 25 Mar 2011 15:41:20 +0000 (17:41 +0200)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into for-linus-1
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
[media] rc: update for bitop name changes
fs: simplify iget & friends
fs: pull inode->i_lock up out of writeback_single_inode
fs: rename inode_lock to inode_hash_lock
fs: move i_wb_list out from under inode_lock
fs: move i_sb_list out from under inode_lock
fs: remove inode_lock from iput_final and prune_icache
fs: Lock the inode LRU list separately
fs: factor inode disposal
fs: protect inode->i_state with inode->i_lock
lib, arch: add filter argument to show_mem and fix private implementations
SLUB: Write to per cpu data when allocating it
slub: Fix debugobjects with lockless fastpath
autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
autofs4 - remove autofs4_lock
autofs4 - fix d_manage() return on rcu-walk
autofs4 - fix autofs4_expire_indirect() traversal
autofs4 - fix dentry leak in autofs4_expire_direct()
autofs4 - reinstate last used update on access
vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
...
NOTE!
This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.
To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.
In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.
Artem Bityutskiy [Fri, 25 Mar 2011 15:10:16 +0000 (17:10 +0200)]
mtd: mtdswap: fix compilation warning
Fix the following compilation warning:
drivers/mtd/mtdswap.c: In function ‘mtdswap_pick_gc_eblk’:
drivers/mtd/mtdswap.c:859: warning: ‘idx’ may be used uninitialized in this function
drivers/mtd/mtdswap.c:859: note: ‘idx’ was declared here
Initialize idx to -1 because this value means "no tree choosen".
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Yang Ruirui [Mon, 14 Mar 2011 01:50:56 +0000 (09:50 +0800)]
mtdswap: kill strict error handling option
As Artem Bityutskiy suggested: this option is controversial, as we
do not really have any prove it is useful. And it is too much to have
it as a config parameter. So, better kill it and let the real mtdswap
users decide whether it is needed or not.
Signed-off-by: Yang Ruirui<ruirui.r.yang@tieto.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Steven Rostedt [Thu, 17 Mar 2011 19:21:07 +0000 (15:21 -0400)]
futex: Fix WARN_ON() test for UP
An update of the futex code had a
WARN_ON(!spin_is_locked(q->lock_ptr))
But on UP, spin_is_locked() is always false, and will
trigger this warning, and even worse, it will exit the function
without doing the necessary work.
Converting this to a WARN_ON_SMP() fixes the problem.
Reported-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <
20110317192208.
682654502@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Rostedt [Thu, 17 Mar 2011 19:21:06 +0000 (15:21 -0400)]
WARN_ON_SMP(): Allow use in if() statements on UP
Both WARN_ON() and WARN_ON_SMP() should be able to be used in
an if statement.
if (WARN_ON_SMP(foo)) { ... }
Because WARN_ON_SMP() is defined as a do { } while (0) on UP,
it can not be used this way.
Convert it to the same form that WARN_ON() is, even when
CONFIG_SMP is off.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <
20110317192208.
444147791@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 25 Mar 2011 09:24:23 +0000 (10:24 +0100)]
perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
Eric Dumazet reported that hardware PMU events do not work on his
system, due to the BIOS corrupting PMU state:
Performance Events: PEBS fmt0+, Core2 events, Broken BIOS detected, using software events only.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c)
Linus suggested that we continue in the face of such BIOS-induced CPU
state corruption:
http://lkml.org/lkml/2011/3/24/608
Such BIOSes will have to be fixed - Linux developers rely on a working and
fully capable PMU and the BIOS interfering with the CPU's PMU state is simply
not acceptable.
So this patch changes perf to continue when it detects such BIOS
interaction, some hardware events may be unreliable due to the BIOS
writing and re-writing them - there's not much the kernel can do
about that but to detect the corruption and report it.
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steffen Klassert [Fri, 25 Mar 2011 08:28:45 +0000 (01:28 -0700)]
route: Take the right src and dst addresses in ip_route_newports
When we set up the flow informations in ip_route_newports(), we take
the address informations from the the rt_key_src and rt_key_dst fields
of the rtable. They appear to be empty. So take the address
informations from rt_src and rt_dst instead. This issue was introduced
by commit
5e2b61f78411be25f0b84f97d5b5d312f184dfd1 ("ipv4: Remove
flowi from struct rtable.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Ungerer [Tue, 22 Mar 2011 03:39:27 +0000 (13:39 +1000)]
m68k: merge m68k and m68knommu arch directories
There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.
This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.
> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif
On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.
With this in place there is now quite a bit of scope for merge cleanups
in future patches.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Linus Torvalds [Fri, 25 Mar 2011 02:01:30 +0000 (19:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
fs: simplify iget & friends
fs: pull inode->i_lock up out of writeback_single_inode
fs: rename inode_lock to inode_hash_lock
fs: move i_wb_list out from under inode_lock
fs: move i_sb_list out from under inode_lock
fs: remove inode_lock from iput_final and prune_icache
fs: Lock the inode LRU list separately
fs: factor inode disposal
fs: protect inode->i_state with inode->i_lock
autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
autofs4 - remove autofs4_lock
autofs4 - fix d_manage() return on rcu-walk
autofs4 - fix autofs4_expire_indirect() traversal
autofs4 - fix dentry leak in autofs4_expire_direct()
autofs4 - reinstate last used update on access
vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
Stephen Rothwell [Fri, 25 Mar 2011 01:30:05 +0000 (12:30 +1100)]
[media] rc: update for bitop name changes
Fix the following compile failure:
drivers/media/rc/ite-cir.c: In function 'ite_decode_bytes':
drivers/media/rc/ite-cir.c:190: error: implicit declaration of function 'generic_find_next_le_bit'
drivers/media/rc/ite-cir.c:199: error: implicit declaration of function 'generic_find_next_zero_le_bit'
Caused by commit
620a32bba4a2 ("[media] rc: New rc-based ite-cir driver
for several ITE CIRs") interacting with commit
c4945b9ed472
("asm-generic: rename generic little-endian bitops functions").
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Wed, 23 Mar 2011 19:03:28 +0000 (15:03 -0400)]
fs: simplify iget & friends
Merge get_new_inode/get_new_inode_fast into iget5_locked/iget_locked
as those were the only callers. Remove the internal ifind/ifind_fast
helpers - ifind_fast only had a single caller, and ifind had two
callers wanting it to do different things. Also clean up the comments
in this area to focus on information important to a developer trying
to use it, instead of overloading them with implementation details.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:43 +0000 (22:23 +1100)]
fs: pull inode->i_lock up out of writeback_single_inode
First thing we do in writeback_single_inode() is take the i_lock and
the last thing we do is drop it. A caller already holds the i_lock,
so pull the i_lock out of writeback_single_inode() to reduce the
round trips on this lock during inode writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:42 +0000 (22:23 +1100)]
fs: rename inode_lock to inode_hash_lock
All that remains of the inode_lock is protecting the inode hash list
manipulation and traversals. Rename the inode_lock to
inode_hash_lock to reflect it's actual function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:41 +0000 (22:23 +1100)]
fs: move i_wb_list out from under inode_lock
Protect the inode writeback list with a new global lock
inode_wb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:40 +0000 (22:23 +1100)]
fs: move i_sb_list out from under inode_lock
Protect the per-sb inode list with a new global lock
inode_sb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:39 +0000 (22:23 +1100)]
fs: remove inode_lock from iput_final and prune_icache
Now that inode state changes are protected by the inode->i_lock and
the inode LRU manipulations by the inode_lru_lock, we can remove the
inode_lock from prune_icache and the initial part of iput_final().
instead of using the inode_lock to protect the inode during
iput_final, use the inode->i_lock instead. This protects the inode
against new references being taken while we change the inode state
to I_FREEING, as well as preventing prune_icache from grabbing the
inode while we are manipulating it. Hence we no longer need the
inode_lock in iput_final prior to setting I_FREEING on the inode.
For prune_icache, we no longer need the inode_lock to protect the
LRU list, and the inodes themselves are protected against freeing
races by the inode->i_lock. Hence we can lift the inode_lock from
prune_icache as well.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:38 +0000 (22:23 +1100)]
fs: Lock the inode LRU list separately
Introduce the inode_lru_lock to protect the inode_lru list. This
lock is nested inside the inode->i_lock to allow the inode to be
added to the LRU list in iput_final without needing to deal with
lock inversions. This keeps iput_final() clean and neat.
Further, where marking the inode I_FREEING and removing it from the
LRU, move the LRU list manipulation within the inode->i_lock to keep
the list manipulation consistent with iput_final. This also means
that most of the open coded LRU list removal + unused inode
accounting can now use the inode_lru_list_del() wrappers which
cleans the code up further.
However, this locking change means what the LRU traversal in
prune_icache() inverts this lock ordering and needs to use trylock
semantics on the inode->i_lock to avoid deadlocking. In these cases,
if we fail to lock the inode we move it to the back of the LRU to
prevent spinning on it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:37 +0000 (22:23 +1100)]
fs: factor inode disposal
We have a couple of places that dispose of inodes. factor the
disposal into evict() to isolate this code and make it simpler to
peel away the inode_lock from the code.
While doing this, change the logic flow in iput_final() to separate
the different cases that need to be handled to make the transitions
the inode goes through more obvious.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Dave Chinner [Tue, 22 Mar 2011 11:23:36 +0000 (22:23 +1100)]
fs: protect inode->i_state with inode->i_lock
Protect inode state transitions and validity checks with the
inode->i_lock. This enables us to make inode state transitions
independently of the inode_lock and is the first step to peeling
away the inode_lock from the code.
This requires that __iget() is done atomically with i_state checks
during list traversals so that we don't race with another thread
marking the inode I_FREEING between the state check and grabbing the
reference.
Also remove the unlock_new_inode() memory barrier optimisation
required to avoid taking the inode_lock when clearing I_NEW.
Simplify the code by simply taking the inode->i_lock around the
state change and wakeup. Because the wakeup is no longer tricky,
remove the wake_up_inode() function and open code the wakeup where
necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David S. Miller [Fri, 25 Mar 2011 01:06:47 +0000 (18:06 -0700)]
ipv4: Fix nexthop caching wrt. scoping.
Move the scope value out of the fib alias entries and into fib_info,
so that we always use the correct scope when recomputing the nexthop
cached source address.
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 25 Mar 2011 00:51:12 +0000 (17:51 -0700)]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/slab-2.6
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
SLUB: Write to per cpu data when allocating it
slub: Fix debugobjects with lockless fastpath
David Rientjes [Thu, 24 Mar 2011 22:18:15 +0000 (15:18 -0700)]
lib, arch: add filter argument to show_mem and fix private implementations
Commit
ddd588b5dd55 ("oom: suppress nodes that are not allowed from
meminfo on oom kill") moved lib/show_mem.o out of lib/lib.a, which
resulted in build warnings on all architectures that implement their own
versions of show_mem():
lib/lib.a(show_mem.o): In function `show_mem':
show_mem.c:(.text+0x1f4): multiple definition of `show_mem'
arch/sparc/mm/built-in.o:(.text+0xd70): first defined here
The fix is to remove __show_mem() and add its argument to show_mem() in
all implementations to prevent this breakage.
Architectures that implement their own show_mem() actually don't do
anything with the argument yet, but they could be made to filter nodes
that aren't allowed in the current context in the future just like the
generic implementation.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Fri, 25 Mar 2011 00:42:21 +0000 (17:42 -0700)]
ipv4: Invalidate nexthop cache nh_saddr more correctly.
Any operation that:
1) Brings up an interface
2) Adds an IP address to an interface
3) Deletes an IP address from an interface
can potentially invalidate the nh_saddr value, requiring
it to be recomputed.
Perform the recomputation lazily using a generation ID.
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 25 Mar 2011 00:27:20 +0000 (17:27 -0700)]
Merge branch 'drm-core-next' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/vblank: update recently added vbl interface to be more future proof.
drm radeon: Return -EINVAL on wrong pm sysfs access
drm/radeon/kms: fix hardcoded EDID handling
Revert "drm/i915: Don't save/restore hardware status page address register"
drm/i915: Avoid unmapping pages from a NULL address space
drm/i915: Fix use after free within tracepoint
drm/i915: Restore missing command flush before interrupt on BLT ring
drm/i915: Disable pagefaults along execbuffer relocation fast path
drm/i915: Fix computation of pitch for dumb bo creator
drm/i915: report correct render clock frequencies on SNB
drm/i915/dp: Correct the order of deletion for ghost eDP devices
drm/i915: Fix tiling corruption from pipelined fencing
drm/i915: Re-enable self-refresh
drm/i915: Prevent racy removal of request from client list
drm/i915: skip redundant operations whilst enabling pipes and planes
drm/i915: Remove surplus POSTING_READs before wait_for_vblank
drm/radeon/kms: prefer legacy pll algo for tv-out
drm: check for modesetting on modeset ioctls
drm/kernel: vblank wait on crtc > 1
drm: Fix use-after-free in drm_gem_vm_close()
Roland Dreier [Fri, 25 Mar 2011 00:13:20 +0000 (17:13 -0700)]
RDMA/nes: Fix test of uninitialized netdev
Commit
1765a575334f ("net: make dev->master general") introduced a
test of an uninitialized netdev. Fix the code so the intended netdev
is tested.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Kjetil Oftedal [Thu, 24 Mar 2011 23:34:52 +0000 (16:34 -0700)]
sparc32: Fix multiple RTC detections on SUN4D
During the preparation for testing the recent changes made to the SUN4D
specific code in the kernel by Sam Ravnborg the following was discovered:
Since the removal of of_platform_bus_type (commit:
eca3930163ba8884060ce9d9ff5ef0d9b7c7b00f )
multiboard SUN4Ds have not been able to boot. The kernel crashes due to a
zero-pointer error encountered when registering multiple M48T59 RTCs
(There is one on each board).
A patch for the was previously submitted, but the problem was not a
serious at that time, as it would only generate warnings. Now the kernel
will crash and stop executing before the serial console has been started.
(Crash output can be viewed by using the -p boot flag)
Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Thu, 24 Mar 2011 23:16:02 +0000 (16:16 -0700)]
net: fix pch_gbe section mismatch warning
Fix section mismatch warning by renaming the pci_driver variable to a
recognized (whitelisted) name.
WARNING: drivers/net/pch_gbe/pch_gbe.o(.data+0x1f8): Section mismatch in reference from the variable pch_gbe_pcidev to the variable .devinit.rodata:pch_gbe_pcidev_id
The variable pch_gbe_pcidev references
the variable __devinitconst pch_gbe_pcidev_id
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Gleixner [Thu, 24 Mar 2011 21:27:37 +0000 (21:27 +0000)]
gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
LKML-Reference: <
20110324212509.
118888535@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 21:27:36 +0000 (21:27 +0000)]
gpio: Cleanup genirq namespace
Converted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
LKML-Reference: <
20110324212509.
025730689@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ryan Mallon [Thu, 24 Mar 2011 22:46:46 +0000 (23:46 +0100)]
arm: ep93xx: Add basic interrupt info
For the time being can we fix up the ep93xx gpio code with the amended
patch below. It keeps the information that the pin is also configured
as an interrupt and cleans the code up a bit.
[ tglx: Rebased it on the removal patch ]
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 21:27:35 +0000 (21:27 +0000)]
arm/gpio: Remove three copies of broken and racy debug code
gpiolib plus two gpio implementations in arm fiddle in the guts of
irq_desc in a racy and buggy way. Remove the stuff. I already told the
gpio folks that we can provide that information in a proper way if
necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
LKML-Reference: <
20110324212508.
931638262@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 20:41:57 +0000 (21:41 +0100)]
x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional
That call escaped the name space cleanup. Fix it up.
We really want to call there. The chip might have changed since the
irq was setup initially. So let the core code and the chip decide what
to do. The status is just an unreliable snapshot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 21:53:10 +0000 (22:53 +0100)]
x86: DT: Fix return condition in irq_create_of_mapping()
The xlate() function returns 0 or a negative error code. Returning the
error code blindly will be seen as an huge irq number by the calling
function because irq_create_of_mapping() returns an unsigned value.
Return 0 (NO_IRQ) as required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Trond Myklebust [Thu, 24 Mar 2011 21:03:14 +0000 (17:03 -0400)]
Merge branch 'nfs-for-2.6.39' into nfs-for-next
Weston Andros Adamson [Thu, 24 Mar 2011 20:48:21 +0000 (16:48 -0400)]
Cleanup XDR parsing for LAYOUTGET, GETDEVICEINFO
changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
- not use vmap, which doesn't work on incoherent archs
- use xdr_stream parsing for all xdr
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don Zickus [Thu, 24 Mar 2011 20:36:25 +0000 (23:36 +0300)]
perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
The read of a proper MSR register was missed and instead of
counter the configration register was tested (it has
ARCH_P4_UNFLAGGED_BIT always cleared) leading to unknown NMI
hitting the system. As result the user may obtain "Dazed and
confused, but trying to continue" message. Fix it by reading a
proper MSR register.
When an NMI happens on a P4, the perf nmi handler checks the
configuration register to see if the overflow bit is set or not
before taking appropriate action. Unfortunately, various P4
machines had a broken overflow bit, so a backup mechanism was
implemented. This mechanism checked to see if the counter
rolled over or not.
A previous commit that implemented this backup mechanism was
broken. Instead of reading the counter register, it used the
configuration register to determine if the counter rolled over
or not. Reading that bit would give incorrect results.
This would lead to 'Dazed and confused' messages for the end
user when using the perf tool (or if the nmi watchdog is
running).
The fix is to read the counter register before determining if
the counter rolled over or not.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <
4D8BAB49.
3080701@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Christoph Lameter [Thu, 24 Mar 2011 19:51:38 +0000 (14:51 -0500)]
SLUB: Write to per cpu data when allocating it
It turns out that the cmpxchg16b emulation has to access vmalloced
percpu memory with interrupts disabled. If the memory has never
been touched before then the fault necessary to establish the
mapping will not to occur and the kernel will fail on boot.
Fix that by reusing the CONFIG_PREEMPT code that writes the
cpu number into a field on every cpu. Writing to the per cpu
area before causes the mapping to be established before we get
to a cmpxchg16b emulation.
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Andy Adamson [Sat, 12 Mar 2011 07:58:10 +0000 (02:58 -0500)]
NFSv4.1 convert layoutcommit sync to boolean
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Andy Adamson [Sat, 12 Mar 2011 07:58:09 +0000 (02:58 -0500)]
NFSv4.1 pnfs_layoutcommit_inode fixes
Test NFS_INO_LAYOUTCOMMIT before kzalloc
Mark inode dirty to retry LAYOUTCOMMIT on kzalloc failure.
Add comments.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Thomas Gleixner [Thu, 24 Mar 2011 17:28:40 +0000 (18:28 +0100)]
xtensa: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 13:58:43 +0000 (14:58 +0100)]
xtensa: Convert genirq namespace
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 21:10:54 +0000 (22:10 +0100)]
xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED
All chips converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <
20110206211137.
849317253@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 21:10:53 +0000 (22:10 +0100)]
xtensa: Convert s6000 gpio irq_chip to new functions
Also use proper wrappers for irq_desc access.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <
20110206211137.
750284615@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 21:10:52 +0000 (22:10 +0100)]
xtensa: Convert main irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <
20110206211137.
653005586@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:25:20 +0000 (18:25 +0100)]
um: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 17:24:42 +0000 (18:24 +0100)]
um: Convert genirq namespace
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 18:24:55 +0000 (19:24 +0100)]
m32r: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 16:32:45 +0000 (17:32 +0100)]
m32r: Convert genirq namespace
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 18:15:36 +0000 (19:15 +0100)]
h8300: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 16:32:22 +0000 (17:32 +0100)]
h8300: Convert genirq namespace
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 16:24:04 +0000 (17:24 +0100)]
avr32: Cleanup eic_set_irq_type()
No need to fiddle in irq_desc. The trigger mask can be written back
into irq_data. Return IRQ_SET_MASK_OK_NOCOPY, so the generic code wont
overwrite it again.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Thomas Gleixner [Thu, 24 Mar 2011 18:08:11 +0000 (19:08 +0100)]
avr32: Use generic show_interrupts()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Thomas Gleixner [Thu, 24 Mar 2011 15:39:32 +0000 (16:39 +0100)]
avr: Cleanup genirq namespace
Scripted conversion to new function names with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Thomas Gleixner [Sun, 6 Feb 2011 16:29:04 +0000 (17:29 +0100)]
avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED
Use the generic Kconfig for interrupts and enable
GENERIC_HARDIRQS_NO_DEPRECATED. All conversions done.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
LKML-Reference: <
20110206163009.
289833604@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 16:29:03 +0000 (17:29 +0100)]
avr32: At32ap: Convert pop irq_chip to new functions
Also replace the open coded handler call with the proper wrapper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
LKML-Reference: <
20110206163009.
190112353@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 16:29:02 +0000 (17:29 +0100)]
avr32: At32ap: Convert intc irq_chip to new functions
Also replace the open coded handler call with the proper wrapper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
LKML-Reference: <
20110206163009.
096308633@linutronix.de>
Thomas Gleixner [Sun, 6 Feb 2011 16:29:01 +0000 (17:29 +0100)]
avr32: At32ap: Convert extint irq_chip to new functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
LKML-Reference: <
20110206163008.
996220791@linutronix.de>
Thomas Gleixner [Thu, 24 Mar 2011 19:26:46 +0000 (21:26 +0200)]
slub: Fix debugobjects with lockless fastpath
On Thu, 24 Mar 2011, Ingo Molnar wrote:
> RIP: 0010:[<
ffffffff810570a9>] [<
ffffffff810570a9>] get_next_timer_interrupt+0x119/0x260
That's a typical timer crash, but you were unable to debug it with
debugobjects because commit
d3f661d6 broke those.
Cc: Christoph Lameter <cl@linux.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Jesper Juhl [Thu, 24 Mar 2011 17:51:37 +0000 (01:51 +0800)]
autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
In fs/autofs4/dev-ioctl.c::autofs_dev_ioctl_setpipefd() we call fget(),
which may return NULL, but we do not explicitly test for that NULL return
so we may end up dereferencing a NULL pointer - bad.
When I originally submitted this patch I had chosen EBUSY as the return
value to use if this happens. Ian Kent was kind enough to explain why that
would most likely be wrong and why EBADF should most likely be used
instead. This version of the patch uses EBADF.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ian Kent [Thu, 24 Mar 2011 17:51:31 +0000 (01:51 +0800)]
autofs4 - remove autofs4_lock
The autofs4_lock introduced by the rcu-walk changes has unnecessarily
broad scope. The locking is better handled by the per-autofs super
block lookup_lock.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ian Kent [Thu, 24 Mar 2011 17:51:25 +0000 (01:51 +0800)]
autofs4 - fix d_manage() return on rcu-walk
The daemon never needs to block and, in the rcu-walk case an error
return isn't used, so always return zero.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ian Kent [Thu, 24 Mar 2011 17:51:20 +0000 (01:51 +0800)]
autofs4 - fix autofs4_expire_indirect() traversal
The vfs-scale changes changed the traversal used in
autofs4_expire_indirect() from a list to a depth first tree traversal
which isn't right.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ian Kent [Thu, 24 Mar 2011 17:51:14 +0000 (01:51 +0800)]
autofs4 - fix dentry leak in autofs4_expire_direct()
There is a missing dput() when returning from autofs4_expire_direct()
when we see that the dentry is already a pending mount.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ian Kent [Thu, 24 Mar 2011 17:51:08 +0000 (01:51 +0800)]
autofs4 - reinstate last used update on access
When direct (and offset) mounts were introduced the the last used
timeout could no longer be updated in ->d_revalidate(). This is
because covered direct mounts would be followed over without calling
the autofs file system. As a result the definition of the busyness
check for all entries was changed to be "actually busy" being an open
file or working directory within the automount. But now we have a call
back in the follow so the last used update on any access can be
re-instated. This requires DCACHE_MANAGE_TRANSIT to always be set.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Dumazet [Thu, 24 Mar 2011 07:01:24 +0000 (07:01 +0000)]
ipv4: fix fib metrics
Alessandro Suardi reported that we could not change route metrics :
ip ro change default .... advmss 1400
This regression came with commit
9c150e82ac50 (Allocate fib metrics
dynamically). fib_metrics is no longer an array, but a pointer to an
array.
Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yevgeny Petrilin [Thu, 24 Mar 2011 18:47:51 +0000 (11:47 -0700)]
mlx4_en: Removing HW info from ethtool -i report.
Avoiding abuse of ethtool_drvinfo.driver field.
HW specific info can be retrieved using lspci.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 24 Mar 2011 18:43:09 +0000 (11:43 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Ian Kent [Thu, 24 Mar 2011 17:51:02 +0000 (01:51 +0800)]
vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
When following a mount in rcu-walk mode we must check if the incoming dentry
is telling us it may need to block, even if it isn't actually a mountpoint.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Bryan Schumaker [Thu, 24 Mar 2011 17:12:31 +0000 (17:12 +0000)]
NFS: Determine initial mount security
When sec=<something> is not presented as a mount option,
we should attempt to determine what security flavor the
server is using.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker [Thu, 24 Mar 2011 17:12:30 +0000 (17:12 +0000)]
NFS: use secinfo when crossing mountpoints
A submount may use different security than the parent
mount does. We should figure out what sec flavor the
submount uses at mount time.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker [Thu, 24 Mar 2011 17:12:29 +0000 (17:12 +0000)]
NFS: Add secinfo procedure
This patch adds the nfs4 operation secinfo as a
valid nfs rpc operation.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker [Thu, 24 Mar 2011 17:12:24 +0000 (17:12 +0000)]
NFS: lookup supports alternate client
A later patch will need to perform a lookup using an
alternate client with a different security flavor.
This patch adds support for doing that on NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker [Thu, 24 Mar 2011 17:12:23 +0000 (17:12 +0000)]
NFS: convert call_sync() to a function
This patch changes nfs4_call_sync() from a macro into a
static inline function. As a macro, the call_sync()
function will not do any type checking and depends
on the sequence arguments always having the same name.
As a function, we get to have type checking and can
rename the arguments if we so choose.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Linus Torvalds [Thu, 24 Mar 2011 17:16:26 +0000 (10:16 -0700)]
Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
Linus Torvalds [Thu, 24 Mar 2011 17:07:50 +0000 (10:07 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/dhowells/linux-2.6-mn10300
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
MN10300: gcc 4.6 vs am33 inline assembly
MN10300: Deprecate gdbstub
MN10300: Allow KGDB to use the MN10300 serial ports
MN10300: Emulate single stepping in KGDB on MN10300
MN10300: Generalise kernel debugger kernel halt, reboot or power off hook
KGDB: Notify GDB of machine halt, reboot or power off
MN10300: Use KGDB
MN10300: Create generic kernel debugger hooks
MN10300: Create general kernel debugger cache flushing
MN10300: Introduce a general config option for kernel debugger hooks
MN10300: The icache invalidate functions should disable the icache first
MN10300: gdbstub: Restrict single-stepping to non-preemptable non-SMP configs