firefly-linux-kernel-4.4.55.git
13 years agoMerge branch 'fortglx/39/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux...
Thomas Gleixner [Thu, 12 May 2011 09:31:13 +0000 (11:31 +0200)]
Merge branch 'fortglx/39/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent

13 years agortc: mc13xxx: Don't call rtc_device_register while holding lock
Uwe Kleine-König [Fri, 6 May 2011 09:57:47 +0000 (11:57 +0200)]
rtc: mc13xxx: Don't call rtc_device_register while holding lock

Since commit f44f7f9 (RTC: Initialize kernel state from RTC)
rtc_device_register reads the programmed alarm. As reading the alarm
needs to take the mc13xxx lock, release it before calling
rtc_device_register.

This fixes a deadlock during boot:

INFO: task swapper:1 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
swapper         D c02b175c     0     1      0 0x00000000
[<c02b175c>] (schedule+0x304/0x4f4) from [<c02b25a8>] (__mutex_lock_slowpath+0x7c/0x110)
[<c02b25a8>] (__mutex_lock_slowpath+0x7c/0x110) from [<c020b4cc>] (mc13xxx_rtc_read_time+0x1c/0x118)
[<c020b4cc>] (mc13xxx_rtc_read_time+0x1c/0x118) from [<c0208f04>] (__rtc_read_time+0x58/0x5c)
[<c0208f04>] (__rtc_read_time+0x58/0x5c) from [<c0209508>] (rtc_read_time+0x30/0x48)
[<c0209508>] (rtc_read_time+0x30/0x48) from [<c0209dd4>] (__rtc_read_alarm+0x1c/0x290)
[<c0209dd4>] (__rtc_read_alarm+0x1c/0x290) from [<c0208d58>] (rtc_device_register+0x150/0x27c)
[<c0208d58>] (rtc_device_register+0x150/0x27c) from [<c02b0b74>] (mc13xxx_rtc_probe+0x128/0x17c)
[<c02b0b74>] (mc13xxx_rtc_probe+0x128/0x17c) from [<c01d5280>] (platform_drv_probe+0x1c/0x24)
[<c01d5280>] (platform_drv_probe+0x1c/0x24) from [<c01d3e58>] (driver_probe_device+0x80/0x1a8)
[<c01d3e58>] (driver_probe_device+0x80/0x1a8) from [<c01d400c>] (__driver_attach+0x8c/0x90)
[<c01d400c>] (__driver_attach+0x8c/0x90) from [<c01d3654>] (bus_for_each_dev+0x60/0x8c)
[<c01d3654>] (bus_for_each_dev+0x60/0x8c) from [<c01d2f6c>] (bus_add_driver+0x180/0x248)
[<c01d2f6c>] (bus_add_driver+0x180/0x248) from [<c01d4664>] (driver_register+0x70/0x15c)
[<c01d4664>] (driver_register+0x70/0x15c) from [<c01d5700>] (platform_driver_probe+0x18/0x98)
[<c01d5700>] (platform_driver_probe+0x18/0x98) from [<c00273a8>] (do_one_initcall+0x2c/0x168)
[<c00273a8>] (do_one_initcall+0x2c/0x168) from [<c00083ac>] (kernel_init+0xa0/0x150)
[<c00083ac>] (kernel_init+0xa0/0x150) from [<c0033ff8>] (kernel_thread_exit+0x0/0x8)

Reported-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: http://bugs.debian.org/625804
[Tweaked commit log -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: rp5c01: Initialize drvdata before registering device
John Stultz [Sat, 7 May 2011 00:31:20 +0000 (17:31 -0700)]
rtc: rp5c01: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: pcap: Initialize drvdata before registering device
John Stultz [Sat, 7 May 2011 00:30:57 +0000 (17:30 -0700)]
rtc: pcap: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: msm6242: Initialize drvdata before registering device
John Stultz [Sat, 7 May 2011 00:28:36 +0000 (17:28 -0700)]
rtc: msm6242: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: max8998: Initialize drvdata before registering device
John Stultz [Sat, 7 May 2011 00:27:07 +0000 (17:27 -0700)]
rtc: max8998: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: max8925: Initialize drvdata before registering device
John Stultz [Sat, 7 May 2011 00:26:25 +0000 (17:26 -0700)]
rtc: max8925: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: m41t80: Initialize clientdata before registering device
John Stultz [Sat, 7 May 2011 00:24:27 +0000 (17:24 -0700)]
rtc: m41t80: Initialize clientdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the clientdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the clientdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: ds1286: Initialize drvdata before registering device
John Stultz [Sat, 7 May 2011 00:21:12 +0000 (17:21 -0700)]
rtc: ds1286: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Wolfram Sang <w.sang@pengutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: ep93xx: Initialize drvdata before registering device
Wolfram Sang [Thu, 5 May 2011 09:46:15 +0000 (11:46 +0200)]
rtc: ep93xx: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
[Fixed up commit log -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: davinci: Initialize drvdata before registering device
Wolfram Sang [Thu, 5 May 2011 09:46:14 +0000 (11:46 +0200)]
rtc: davinci: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
[fixed up commit log -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agortc: mxc: Initialize drvdata before registering device
Wolfram Sang [Wed, 4 May 2011 15:31:27 +0000 (17:31 +0200)]
rtc: mxc: Initialize drvdata before registering device

Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") uncovered
an issue in a number of RTC drivers, where the drivers call
rtc_device_register before initializing the device or platform drvdata.

This frequently results in null pointer dereferences when the
rtc_device_register immediately makes use of the rtc device, calling
rtc_read_alarm.

The solution is to ensure the drvdata is initialized prior to registering
the rtc device.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: rtc-linux@googlegroups.com
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
[fixed up commit log -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
13 years agoclocksource: Install completely before selecting
john stultz [Thu, 5 May 2011 01:16:50 +0000 (18:16 -0700)]
clocksource: Install completely before selecting

Christian Hoffmann reported that the command line clocksource override
with acpi_pm timer fails:

 Kernel command line: <SNIP> clocksource=acpi_pm
 hpet clockevent registered
 Switching to clocksource hpet
 Override clocksource acpi_pm is not HRT compatible.
 Cannot switch while in HRT/NOHZ mode.

The watchdog code is what enables CLOCK_SOURCE_VALID_FOR_HRES, but we
actually end up selecting the clocksource before we enqueue it into
the watchdog list, so that's why we see the warning and fail to switch
to acpi_pm timer as requested. That's particularly bad when we want to
debug timekeeping related problems in early boot.

Put the selection call last.

Reported-by: Christian Hoffmann <email@christianhoffmann.info>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: stable@kernel.org # 32...
Link: http://lkml.kernel.org/r/%3C1304558210.2943.24.camel%40work-vm%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoMerge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Wed, 4 May 2011 21:23:41 +0000 (14:23 -0700)]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c
  staging: intel_sst: intelmid needs delay.h
  staging: solo6x10: add select SND_PCM to fix build error
  staging: usbip: vhci: fix oops on subsequent attach
  staging: ft1000: Remove unnecessary EXPORT_SYMBOLs
  staging: rts_pstor: use #ifdef instead of #if
  staging: rts_pstor: Add <linux/vmalloc.h>
  staging: gma500: Depend on X86
  staging: olpc: Add <linux/delay.h>

13 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Wed, 4 May 2011 21:22:53 +0000 (14:22 -0700)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  xHCI: Clear PLC in xhci_bus_resume()
  USB: fix regression in usbip by setting has_tt flag
  usb/isp1760: Report correct urb status after unlink
  omap:usb: add regulator support for EHCI
  mfd: Fix usbhs_enable error handling
  usb: musb: gadget: Fix out-of-sync runtime pm calls
  usb: musb: omap2430: Fix retention idle on musb peripheral only boards

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Wed, 4 May 2011 21:22:20 +0000 (14:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: do not call __mark_dirty_inode under i_lock
  libceph: fix ceph_osdc_alloc_request error checks
  ceph: handle ceph_osdc_new_request failure in ceph_writepages_start
  libceph: fix ceph_msg_new error path
  ceph: use ihold() when i_lock is held

13 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Wed, 4 May 2011 21:22:04 +0000 (14:22 -0700)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] ngene: Fix CI data transfer regression Fix CI data transfer regression introduced by previous cleanup.
  [media] v4l: make sure drivers supply a zeroed struct v4l2_subdev
  [media] Missing frontend config for LME DM04/QQBOX
  [media] rc_core: avoid kernel oops when rmmod saa7134
  [media] imon: add conditional locking in change_protocol
  [media] rc: show RC_TYPE_OTHER in sysfs
  [media] ite-cir: modular build on ppc requires delay.h include
  [media] mceusb: add Dell transceiver ID

13 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1...
Linus Torvalds [Wed, 4 May 2011 21:21:39 +0000 (14:21 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: Fix for broken configrom updates in quick succession

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Wed, 4 May 2011 21:21:08 +0000 (14:21 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  flex_arrays: allow zero length flex arrays
  flex_array: flex_array_prealloc takes a number of elements, not an end
  SELinux: pass last path component in may_create

13 years agoslub: Fix the lockless code on 32-bit platforms with no 64-bit cmpxchg
Thomas Gleixner [Wed, 4 May 2011 13:38:19 +0000 (15:38 +0200)]
slub: Fix the lockless code on 32-bit platforms with no 64-bit cmpxchg

The SLUB allocator use of the cmpxchg_double logic was wrong: it
actually needs the irq-safe one.

That happens automatically when we use the native unlocked 'cmpxchg8b'
instruction, but when compiling the kernel for older x86 CPUs that do
not support that instruction, we fall back to the generic emulation
code.

And if you don't specify that you want the irq-safe version, the generic
code ends up just open-coding the cmpxchg8b equivalent without any
protection against interrupts or preemption.  Which definitely doesn't
work for SLUB.

This was reported by Werner Landgraf <w.landgraf@ru.ru>, who saw
instability with his distro-kernel that was compiled to support pretty
much everything under the sun.  Most big Linux distributions tend to
compile for PPro and later, and would never have noticed this problem.

This also fixes the prototypes for the irqsafe cmpxchg_double functions
to use 'bool' like they should.

[ Btw, that whole "generic code defaults to no protection" design just
  sounds stupid - if the code needs no protection, there is no reason to
  use "cmpxchg_double" to begin with.  So we should probably just remove
  the unprotected version entirely as pointless.   - Linus ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: werner <w.landgraf@ru.ru>
Acked-and-tested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1105041539050.3005@ionos
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoceph: do not call __mark_dirty_inode under i_lock
Sage Weil [Wed, 4 May 2011 18:33:47 +0000 (11:33 -0700)]
ceph: do not call __mark_dirty_inode under i_lock

The __mark_dirty_inode helper now takes i_lock as of 250df6ed.  Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.

Signed-off-by: Sage Weil <sage@newdream.net>
13 years agoLinux 2.6.39-rc6
Linus Torvalds [Wed, 4 May 2011 02:59:13 +0000 (19:59 -0700)]
Linux 2.6.39-rc6

13 years agoMerge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux into for...
James Morris [Wed, 4 May 2011 01:59:34 +0000 (11:59 +1000)]
Merge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux into for-linus

13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 4 May 2011 01:52:09 +0000 (18:52 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: fix gart setup on fusion parts (v2)
  drm: Send pending vblank events before disabling vblank.
  drm/radeon: fix regression on atom cards with hardcoded EDID record.
  drm/radeon/kms: add some new pci ids

13 years agodrm/radeon/kms: fix gart setup on fusion parts (v2)
Alex Deucher [Tue, 3 May 2011 23:28:02 +0000 (19:28 -0400)]
drm/radeon/kms: fix gart setup on fusion parts (v2)

Out of the entire GART/VM subsystem, the hw designers changed
the location of 3 regs.

v2: airlied: add parameter for userspace to work from.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm: Send pending vblank events before disabling vblank.
Christopher James Halse Rogers [Wed, 27 Apr 2011 06:10:57 +0000 (16:10 +1000)]
drm: Send pending vblank events before disabling vblank.

This is the least-bad behaviour.  It means that we signal the
vblank event before it actually happens, but since we're disabling
vblanks there's no guarantee that it will *ever* happen otherwise.

This prevents GL applications which use WaitMSC from hanging
indefinitely.

Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon: fix regression on atom cards with hardcoded EDID record.
Dave Airlie [Sun, 1 May 2011 10:16:30 +0000 (20:16 +1000)]
drm/radeon: fix regression on atom cards with hardcoded EDID record.

Since fafcf94e2b5732d1e13b440291c53115d2b172e9 introduced an edid size, it seems to have broken this path.

This manifest as oops on T500 Lenovo laptops with dual graphics primarily.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33812
cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: add some new pci ids
Alex Deucher [Tue, 3 May 2011 19:15:55 +0000 (15:15 -0400)]
drm/radeon/kms: add some new pci ids

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agologfs: initialize superblock entries earlier
Linus Torvalds [Tue, 3 May 2011 23:10:25 +0000 (16:10 -0700)]
logfs: initialize superblock entries earlier

In particular, s_freeing_list needs to be initialized early, since it is
used on some of the error paths when mounts fail.  The mapping inode,
for example, would be initialized and then free'd on an error path
before s_freeing_list was initialized, but the inode drop operation
needs the s_freeing_list to be set up.

Normally you'd never see this, because not only is logfs fairly rare,
but a successful mount will never have any issues.

Reported-by: werner <w.landgraf@ru.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agostaging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c
Harry Wei [Thu, 28 Apr 2011 01:30:01 +0000 (09:30 +0800)]
staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c

Hi us,
   When i was compiling kernel, a warning happened to me.
The warning said like following.

drivers/staging/wlan-ng/cfg80211.c:709: warning: initialization from
incompatible pointer type.

See http://s1202.photobucket.com/albums/bb364/harrywei/?action=view&current=patched2.png
for more details.

So i patch like following.

Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agoxHCI: Clear PLC in xhci_bus_resume()
Andiry Xu [Tue, 19 Apr 2011 09:17:39 +0000 (17:17 +0800)]
xHCI: Clear PLC in xhci_bus_resume()

This patch clears PORT_PLC if xhci_bus_resume() resumes a previous suspended
port, because if a port transition from U3 to U0 state, it will report a
port link state change, and software should clear the corresponding PLC bit.

It also uses hcd->speed to check if a port is a USB2 protocol port.

The patch fixes the issue that USB keyboard can not wakeup system from
hibernation.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
13 years agolibceph: fix ceph_osdc_alloc_request error checks
Sage Weil [Tue, 3 May 2011 16:23:36 +0000 (09:23 -0700)]
libceph: fix ceph_osdc_alloc_request error checks

ceph_osdc_alloc_request returns NULL on failure.

Signed-off-by: Sage Weil <sage@newdream.net>
13 years agoceph: handle ceph_osdc_new_request failure in ceph_writepages_start
Henry C Chang [Tue, 3 May 2011 09:45:16 +0000 (09:45 +0000)]
ceph: handle ceph_osdc_new_request failure in ceph_writepages_start

We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
13 years agolibceph: fix ceph_msg_new error path
Henry C Chang [Tue, 3 May 2011 02:29:56 +0000 (02:29 +0000)]
libceph: fix ceph_msg_new error path

If memory allocation failed, calling ceph_msg_put() will cause GPF
since some of ceph_msg variables are not initialized first.

Fix Bug #970.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
13 years agoceph: use ihold() when i_lock is held
Sage Weil [Tue, 3 May 2011 16:28:08 +0000 (09:28 -0700)]
ceph: use ihold() when i_lock is held

See 0444d76ae64fffc7851797fc1b6ebdbb44ac504a.

Signed-off-by: Sage Weil <sage@newdream.net>
13 years agoMerge branch 'stable/bug-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 3 May 2011 16:25:42 +0000 (09:25 -0700)]
Merge branch 'stable/bug-fixes-for-rc5' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: mask_rw_pte mark RO all pagetable pages up to pgt_buf_top
  xen/mmu: Add workaround "x86-64, mm: Put early page table high"

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Tue, 3 May 2011 16:24:44 +0000 (09:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finish
  mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finish
  mmc: tmio: fix .set_ios(MMC_POWER_UP) handling
  mmc: fix a race between card-detect rescan and clock-gate work instances
  mmc: omap: Fix possible NULL pointer deref
  mmc: core: mmc_add_card(): fix missing break in switch statement
  mmc: sdhci-pci: Fix error case in sdhci_pci_probe_slot()

13 years agoMerge branches 'x86-fixes-for-linus' and 'irq-fixes-for-linus' of git://git.kernel...
Linus Torvalds [Tue, 3 May 2011 16:23:44 +0000 (09:23 -0700)]
Merge branches 'x86-fixes-for-linus' and 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, reboot: Fix relocations in reboot_32.S
  x86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo()
  x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVEL

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Tue, 3 May 2011 03:26:32 +0000 (20:26 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wm831x-ts - move BTN_TOUCH reporting to data transfer
  Input: wm831x-ts - allow IRQ flags to be specified
  Input: wm831x-ts - fix races with IRQ management

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 3 May 2011 01:00:43 +0000 (18:00 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  sysctl: net: call unregister_net_sysctl_table where needed
  Revert: veth: remove unneeded ifname code from veth_newlink()
  smsc95xx: fix reset check
  tg3: Fix failure to enable WoL by default when possible
  networking: inappropriate ioctl operation should return ENOTTY
  amd8111e: trivial typo spelling: Negotitate -> Negotiate
  ipv4: don't spam dmesg with "Using LC-trie" messages
  af_unix: Only allow recv on connected seqpacket sockets.
  mii: add support of pause frames in mii_get_an
  net: ftmac100: fix scheduling while atomic during PHY link status change
  usbnet: Transfer of maintainership
  usbnet: add support for some Huawei modems with cdc-ether ports
  bnx2: cancel timer on device removal
  iwl4965: fix "Received BA when not expected"
  iwlagn: fix "Received BA when not expected"
  dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085
  usbnet: Resubmit interrupt URB if device is open
  iwl4965: fix "TX Power requested while scanning"
  iwlegacy: led stay solid on when no traffic
  b43: trivial: update module info about ucode16_mimo firmware
  ...

13 years agoUSB: fix regression in usbip by setting has_tt flag
Alan Stern [Mon, 2 May 2011 18:21:44 +0000 (14:21 -0400)]
USB: fix regression in usbip by setting has_tt flag

This patch (as1460) fixes a regression in the usbip driver caused by
the new check for Transaction Translators in USB-2 hubs.  The root hub
registered by vhci_hcd needs to have the has_tt flag set, because it
can connect to low- and full-speed devices as well as high-speed
devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agousb/isp1760: Report correct urb status after unlink
Arvid Brodin [Tue, 26 Apr 2011 19:46:47 +0000 (21:46 +0200)]
usb/isp1760: Report correct urb status after unlink

This fixes a bug in my previous (2.6.38) patch series which caused
urb->status value to be wrong after unlink (broke usbtest 11, 12).

Signed-off-by: Arvid Brodin <arvid.brodin@enea.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
13 years agosysctl: net: call unregister_net_sysctl_table where needed
Lucian Adrian Grijincu [Sun, 1 May 2011 01:44:01 +0000 (01:44 +0000)]
sysctl: net: call unregister_net_sysctl_table where needed

ctl_table_headers registered with register_net_sysctl_table should
have been unregistered with the equivalent unregister_net_sysctl_table

Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoRevert: veth: remove unneeded ifname code from veth_newlink()
Jiri Pirko [Sat, 30 Apr 2011 01:28:17 +0000 (01:28 +0000)]
Revert: veth: remove unneeded ifname code from veth_newlink()

84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 ("veth: remove unneeded
ifname code from veth_newlink()") caused regression on veth
creation. This patch reverts the original one.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosmsc95xx: fix reset check
Rabin Vincent [Sat, 30 Apr 2011 08:29:27 +0000 (08:29 +0000)]
smsc95xx: fix reset check

The reset loop check should check the MII_BMCR register value for
BMCR_RESET rather than for MII_BMCR (the register address, which also
happens to be zero).

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Fix failure to enable WoL by default when possible
Rafael J. Wysocki [Thu, 28 Apr 2011 11:02:15 +0000 (11:02 +0000)]
tg3: Fix failure to enable WoL by default when possible

tg3 is supposed to enable WoL by default on adapters which support
that, but it fails to do so unless the adapter's
/sys/devices/.../power/wakeup file contains 'enabled' during the
initialization of the adapter.  Fix that by making tg3 use
device_set_wakeup_enable() to enable wakeup automatically whenever
WoL should be enabled by default.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetworking: inappropriate ioctl operation should return ENOTTY
Lifeng Sun [Wed, 27 Apr 2011 22:04:51 +0000 (22:04 +0000)]
networking: inappropriate ioctl operation should return ENOTTY

ioctl() calls against a socket with an inappropriate ioctl operation
are incorrectly returning EINVAL rather than ENOTTY:

  [ENOTTY]
      Inappropriate I/O control operation.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=33992
Signed-off-by: Lifeng Sun <lifongsun@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agox86, reboot: Fix relocations in reboot_32.S
H. Peter Anvin [Mon, 2 May 2011 21:33:24 +0000 (14:33 -0700)]
x86, reboot: Fix relocations in reboot_32.S

The use of base for %ebx in this file is arbitrary, *except* that we
also use it to compute the real-mode segment.  Therefore, make it so
that r_base really is the true address to which %ebx points.

This resolves kernel bugzilla 33302.

Reported-and-tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-08os5wi3yq1no0y4i5m4z7he@git.kernel.org
13 years agoamd8111e: trivial typo spelling: Negotitate -> Negotiate
Joe Perches [Mon, 2 May 2011 09:59:29 +0000 (09:59 +0000)]
amd8111e: trivial typo spelling: Negotitate -> Negotiate

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agofirewire: Fix for broken configrom updates in quick succession
B.J. Buchalter [Mon, 2 May 2011 17:33:42 +0000 (13:33 -0400)]
firewire: Fix for broken configrom updates in quick succession

Current implementation of ohci_set_config_rom() uses a deferred
bus reset via fw_schedule_bus_reset(). If clients add multiple
unit descriptors to the config_rom in quick succession, the
deferred bus reset may not have fired before succeeding update
requests have come in. This can lead to an incorrect partial
update of the config_rom for both addition and removal of
config_rom descriptors, as the ohci_set_config_rom() routine
will return -EBUSY if a previous pending update has not been
completed yet; the requested update just gets dropped on the floor.

This patch recognizes that the "in-flight" update can be modified
until it has been processed by the bus-reset, and the locking
in the bus_reset_tasklet ensures that the update is done atomically
with respect to modifications made by ohci_set_config_rom(). The
-EBUSY error case is simply removed.

[Stefan R:  The bug always existed at least theoretically.  But it
became easy to trigger since 2.6.36 commit 02d37bed188c "firewire: core:
integrate software-forced bus resets with bus management" which
introduced long mandatory delays between janitorial bus resets.]

Signed-off-by: Benjamin Buchalter <bj@mhlabs.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (trivial style changes)
Cc: <stable@kernel.org> # 2.6.36.y and newer
13 years agoxen: mask_rw_pte mark RO all pagetable pages up to pgt_buf_top
Stefano Stabellini [Tue, 12 Apr 2011 11:19:49 +0000 (12:19 +0100)]
xen: mask_rw_pte mark RO all pagetable pages up to pgt_buf_top

mask_rw_pte is currently checking if a pfn is a pagetable page if it
falls in the range pgt_buf_start - pgt_buf_end but that is incorrect
because pgt_buf_end is a moving target: pgt_buf_top is the real
boundary.

Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
13 years agoxen/mmu: Add workaround "x86-64, mm: Put early page table high"
Konrad Rzeszutek Wilk [Fri, 29 Apr 2011 15:34:00 +0000 (11:34 -0400)]
xen/mmu: Add workaround "x86-64, mm: Put early page table high"

As a consequence of the commit:

commit 4b239f458c229de044d6905c2b0f9fe16ed9e01e
Author: Yinghai Lu <yinghai@kernel.org>
Date:   Fri Dec 17 16:58:28 2010 -0800

    x86-64, mm: Put early page table high

it causes the Linux kernel to crash under Xen:

mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) mm.c:2466:d0 Bad type (saw 7400000000000001 != exp 1000000000000000) for mfn b1d89 (pfn bacf7)
(XEN) mm.c:3027:d0 Error while pinning mfn b1d89
(XEN) traps.c:481:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
...

The reason is that at some point init_memory_mapping is going to reach
the pagetable pages area and map those pages too (mapping them as normal
memory that falls in the range of addresses passed to init_memory_mapping
as argument). Some of those pages are already pagetable pages (they are
in the range pgt_buf_start-pgt_buf_end) therefore they are going to be
mapped RO and everything is fine.
Some of these pages are not pagetable pages yet (they fall in the range
pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
are going to be mapped RW.  When these pages become pagetable pages and
are hooked into the pagetable, xen will find that the guest has already
a RW mapping of them somewhere and fail the operation.
The reason Xen requires pagetables to be RO is that the hypervisor needs
to verify that the pagetables are valid before using them. The validation
operations are called "pinning" (more details in arch/x86/xen/mmu.c).

In order to fix the issue we mark all the pages in the entire range
pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
is completed only the range pgt_buf_start-pgt_buf_end is reserved by
init_memory_mapping. Hence the kernel is going to crash as soon as one
of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
ranges are RO).

For this reason, this function is introduced which is called _after_
the init_memory_mapping has completed (in a perfect world we would
call this function from init_memory_mapping, but lets ignore that).

Because we are called _after_ init_memory_mapping the pgt_buf_[start,
end,top] have all changed to new values (b/c another init_memory_mapping
is called). Hence, the first time we enter this function, we save
away the pgt_buf_start value and update the pgt_buf_[end,top].

When we detect that the "old" pgt_buf_start through pgt_buf_end
PFNs have been reserved (so memblock_x86_reserve_range has been called),
we immediately set out to RW the "old" pgt_buf_end through pgt_buf_top.

And then we update those "old" pgt_buf_[end|top] with the new ones
so that we can redo this on the next pagetable.

Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Updated with Jeremy's comments]
[v2: Added the crash output]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 2 May 2011 19:21:47 +0000 (12:21 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

13 years agoMerge branch 'for-linus' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Mon, 2 May 2011 19:17:29 +0000 (12:17 -0700)]
Merge branch 'for-linus' of git://git.infradead.org/ubifs-2.6

* 'for-linus' of git://git.infradead.org/ubifs-2.6:
  UBIFS: seek journal heads to the latest bud in replay
  UBIFS: do not free write-buffers when in R/O mode

13 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 2 May 2011 19:17:05 +0000 (12:17 -0700)]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: (47 commits)
  CLKDEV: Fix clkdev return value for NULL clk case
  ARM: 6891/1: prevent heap corruption in OABI semtimedop
  ARM: kprobes: Tidy-up kprobes-decode.c
  ARM: kprobes: Add emulation of hint instructions like NOP and WFI
  ARM: kprobes: Add emulation of SBFX, UBFX, BFI and BFC instructions
  ARM: kprobes: Add emulation of MOVW and MOVT instructions
  ARM: kprobes: Reject probing of undefined data processing instructions
  ARM: kprobes: Remove redundant code in space_1111
  ARM: kprobes: Fix emulation of PLD instructions
  ARM: kprobes: Reject probing of SETEND instructions
  ARM: kprobes: Consolidate stub decoding functions
  ARM: kprobes: Reject probing of all coprocessor instructions
  ARM: kprobes: Fix emulation of USAD8 instructions
  ARM: kprobes: Fix emulation of SMUAD, SMUSD and SMMUL instructions
  ARM: kprobes: Fix emulation of SXTB16, SXTB, SXTH, UXTB16, UXTB and UXTH instructions
  ARM: kprobes: Reject probing of undefined media instructions
  ARM: kprobes: Add emulation of RBIT instruction
  ARM: kprobes: Reject probing of LDRB instructions which load PC
  ARM: kprobes: Fix emulation of LDRD and STRD instructions
  ARM: kprobes: Reject probing of LDR/STR instructions which update PC unpredictably
  ...

13 years agogenirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVEL
Geert Uytterhoeven [Sat, 30 Apr 2011 20:56:20 +0000 (22:56 +0200)]
genirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVEL

commit ab7798ffcf98b11a9525cf65bacdae3fd58d357f ("genirq: Expand generic
show_interrupts()") added the Kconfig option GENERIC_IRQ_SHOW_LEVEL to
accomodate PowerPC, but this doesn't actually enable the functionality due
to a typo in the #ifdef check.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linux/PPC Development <linuxppc-dev@lists.ozlabs.org>
Link: http://lkml.kernel.org/r/%3Calpine.DEB.2.00.1104302251370.19068%40ayla.of.borg%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoUBIFS: seek journal heads to the latest bud in replay
Artem Bityutskiy [Mon, 25 Apr 2011 15:46:31 +0000 (18:46 +0300)]
UBIFS: seek journal heads to the latest bud in replay

This is the second fix of the following symptom:

UBIFS error (pid 34456): could not find an empty LEB

which sometimes happens after power cuts when we mount the file-system - UBIFS
refuses it with the above error message which comes from the
'ubifs_rcvry_gc_commit()' function. I can reproduce this using the integck test
with the UBIFS power cut emulation enabled.

Analysis of the problem.

Currently UBIFS replay seeks the journal heads to the last _replayed_ bud.
But the buds are replayed out-of-order, so the replay basically seeks journal
heads to the "random" bud belonging to this head, and not to the _last_ one.

The result of this is that the GC head may be seeked to a full LEB with no free
space, or very little free space. And 'ubifs_rcvry_gc_commit()' tries to find a
fully or mostly dirty LEB to match the current GC head (because we need to
garbage-collect that dirty LEB at one go, because we do not have @c->gc_lnum).
So 'ubifs_find_dirty_leb()' fails and we fall back to finding an empty LEB and
also fail. As a result - recovery fails and mounting fails.

This patch teaches the replay to initialize the GC heads exactly to the latest
buds, i.e. the buds which have the largest sequence number in corresponding
log reference nodes.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
13 years agoUBIFS: do not free write-buffers when in R/O mode
Artem Bityutskiy [Mon, 25 Apr 2011 15:17:09 +0000 (18:17 +0300)]
UBIFS: do not free write-buffers when in R/O mode

Currently UBIFS has a small optimization - it frees write-buffers when it is
re-mounted from R/W mode to R/O mode. Of course, when it is mounted R/O, it
does not allocate write-buffers as well.

This optimization is nice but it leads to subtle problems and complications
in recovery, which I can reproduce using the integck test. The symptoms are
that after a power cut the file-system cannot be mounted if we first mount
it R/O, and then re-mount R/W - 'ubifs_rcvry_gc_commit()' prints:

UBIFS error (pid 34456): could not find an empty LEB

Analysis of the  problem.

When mounting R/W, the reply process sets journal heads to buds [1], but
when mounting R/O - it does not do this, because the write-buffers are not
allocated. So 'ubifs_rcvry_gc_commit()' works completely differently for the
same file-system but for the following 2 cases:

1. mounting R/W after a power cut and recover
2. mounting R/O after a power cut, re-mounting R/W and run deferred recovery

In the former case, we have journal heads seeked to the a bud, in the latter
case, they are non-seeked (wbuf->lnum == -1). So in the latter case we do not
try to recover the GC LEB by garbage-collecting to the GC head, but we just
try to find an empty LEB, and there may be no empty LEBs, so we just fail.
On the other hand, in the former case (mount R/W), we are able to make a GC LEB
(@c->gc_lnum) by garbage-collecting.

Thus, let's remove this small nice optimization and always allocate
write-buffers. This should not make too big difference - we have only 3
of them, each of max. write unit size, which is usually 2KiB. So this is
about 6KiB of RAM for the typical case, and only when mounted R/O.

[1]: Note, currently the replay process is setting (seeking) the journal heads
to _some_ buds, not necessarily to the buds which had been the journal heads
before the power cut happened. This will be fixed separately.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 2 May 2011 16:07:27 +0000 (09:07 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix Realtek's chained fixup checks
  Revert "ALSA: hda - Fix pin-config of Gigabyte mobo"
  ALSA: HDA: Fix automute for Gateway NV79
  ALSA: hda: add beep quirk for Realtek 0x1043:831a
  ALSA: usb-audio - Terratec Aureon 7.1 USB ID as C-Media cm6206 quirks
  ALSA: hda - VIA: Fix notify_aa_path_ctls() invalid issue.
  ALSA - au88x0 - Add buffer bytes constraints

13 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 2 May 2011 15:47:35 +0000 (08:47 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] irqstats: fix counting of pfault, dasd diag and virtio irqs
  [S390] prng: fix pointer arithmetic

13 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Mon, 2 May 2011 15:47:12 +0000 (08:47 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register fails

13 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Mon, 2 May 2011 15:46:50 +0000 (08:46 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-parport: Fix adapter list handling
  i2c-i801: Move device ID definitions to driver

13 years agoXZ decompressor: Fix decoding of empty LZMA2 streams
Lasse Collin [Sun, 1 May 2011 16:38:42 +0000 (19:38 +0300)]
XZ decompressor: Fix decoding of empty LZMA2 streams

The old code considered valid empty LZMA2 streams to be corrupt.
Note that a typical empty .xz file has no LZMA2 data at all,
and thus most .xz files having no uncompressed data are handled
correctly even without this fix.

Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoomap:usb: add regulator support for EHCI
Keshava Munegowda [Thu, 21 Apr 2011 14:22:43 +0000 (19:52 +0530)]
omap:usb: add regulator support for EHCI

in case of ehci phy mode; regulator of phy
should be enabled before initializing the
usbhs core driver.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Tested-by: Steve Calfee <stevecalfee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoALSA: hda - Fix Realtek's chained fixup checks
Takashi Iwai [Mon, 2 May 2011 11:55:36 +0000 (13:55 +0200)]
ALSA: hda - Fix Realtek's chained fixup checks

The check of chained fixup list entry was done against the wrong element.
A stupid mistake during refactoring.

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agomfd: Fix usbhs_enable error handling
Axel Lin [Thu, 21 Apr 2011 14:22:41 +0000 (19:52 +0530)]
mfd: Fix usbhs_enable error handling

In the case of missing platform_data we do not hold a spin_lock,
thus we should not call spin_unlock_irqrestore in the error path.

Also simplify the error handling by separating the successful path
from error path. I think this change improves readability.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Tested-by: Steve Calfee <stevecalfee@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: gadget: Fix out-of-sync runtime pm calls
Jarkko Nikula [Fri, 29 Apr 2011 13:17:35 +0000 (16:17 +0300)]
usb: musb: gadget: Fix out-of-sync runtime pm calls

If cable is not connected to peripheral only board when initializing the
gadget driver, then runtime pm calls are out-of-sync and the musb cannot
idle with omap2430.c. This was noted on Nokia N900 where musb prevented the
CPU to be able to enter deeper retention idle state.

This was working in 2.6.38 before runtime pm conversions but there musb
smart standby/idle modes were configured statically where they are now
updated runtime depending on use and cable status.

Reason for out-of-sync is that runtime pm is activated in function
musb_gadget.c: usb_gadget_probe_driver but suspended only in OTG mode if
cable is not connected when initializing. In peripheral only mode this leads
to out-of-sync runtime pm since runtime pm remain active and is activated
another time in omap2430.c: musb_otg_notifications for VBUS Connect event
and thus cannot suspend for VBUS Disconnect event since the use count remains
active.

Fix this by moving cable status check and pm_runtime_put call in
usb_gadget_probe_driver out of is_otg_enabled block.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agousb: musb: omap2430: Fix retention idle on musb peripheral only boards
Jarkko Nikula [Wed, 27 Apr 2011 14:02:37 +0000 (17:02 +0300)]
usb: musb: omap2430: Fix retention idle on musb peripheral only boards

Recent runtime pm and hwmod conversions for 2.6.39 broke the musb peripheral
mode OMAP retention idle on boards where the board mode in struct
musb_hdrc_platform_data is set to MUSB_PERIPHERAL.

These conversions changed the way how the OTG_SYSCONFIG register is
configured and used in runtime. Before 2.6.39 smart standby/idle modes were
activated statically in OTG_SYSCONFIG. Those modes allow that the musb is
able to idle when peripheral device is not connected to host.

In 2.6.39 the OTG_SYSCONFIG is updated runtime depending on VBUS status.
No standby/idle modes are used when device is connected and force
standby/idle when disconnected.

Unfortunately VBUS disconnect event that handles the disconnect case lets
the peripheral musb to idle only when board mode is MUSB_OTG. Fix this by
checking the peripheral mode also.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
13 years agoRevert "ALSA: hda - Fix pin-config of Gigabyte mobo"
Takashi Iwai [Mon, 2 May 2011 08:37:29 +0000 (10:37 +0200)]
Revert "ALSA: hda - Fix pin-config of Gigabyte mobo"

This reverts commit c6b358748e19ce7e230b0926ac42696bc485a562.

It turned out that there are different pin configurations for this
PCI SSID, including multi-channel modes.  And more proper fix for
allowing line-out mutes will come up in 2.6.40 tree, so we won't need
this fixup any more there.

Reported-by: Andrew Clayton <andrew@digital-domain.net>
Reported-by: Emmanuel Benisty <benisty.e@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoipv4: don't spam dmesg with "Using LC-trie" messages
Alexey Dobriyan [Sun, 1 May 2011 02:04:11 +0000 (02:04 +0000)]
ipv4: don't spam dmesg with "Using LC-trie" messages

fib_trie_table() is called during netns creation and
Chromium uses clone(CLONE_NEWNET) to sandbox renderer process.

Don't print anything.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoaf_unix: Only allow recv on connected seqpacket sockets.
Eric W. Biederman [Sun, 24 Apr 2011 01:54:57 +0000 (01:54 +0000)]
af_unix: Only allow recv on connected seqpacket sockets.

This fixes the following oops discovered by Dan Aloni:
> Anyway, the following is the output of the Oops that I got on the
> Ubuntu kernel on which I first detected the problem
> (2.6.37-12-generic). The Oops that followed will be more useful, I
> guess.

>[ 5594.669852] BUG: unable to handle kernel NULL pointer dereference
> at           (null)
> [ 5594.681606] IP: [<ffffffff81550b7b>] unix_dgram_recvmsg+0x1fb/0x420
> [ 5594.687576] PGD 2a05d067 PUD 2b951067 PMD 0
> [ 5594.693720] Oops: 0002 [#1] SMP
> [ 5594.699888] last sysfs file:

The bug was that unix domain sockets use a pseduo packet for
connecting and accept uses that psudo packet to get the socket.
In the buggy seqpacket case we were allowing unconnected
sockets to call recvmsg and try to receive the pseudo packet.

That is always wrong and as of commit 7361c36c5 the pseudo
packet had become enough different from a normal packet
that the kernel started oopsing.

Do for seqpacket_recv what was done for seqpacket_send in 2.5
and only allow it on connected seqpacket sockets.

Cc: stable@kernel.org
Tested-by: Dan Aloni <dan@aloni.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agox86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo()
Yinghai Lu [Sun, 1 May 2011 17:12:04 +0000 (19:12 +0200)]
x86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo()

numa_cleanup_meminfo() trims each memblk between low (0) and
high (max_pfn) limits and discards empty ones.  However, the
emptiness detection incorrectly used equality test.  If the
start of a memblk is higher than max_pfn, it is empty but fails
the equality test and doesn't get discarded.

The condition triggers when max_pfn is lower than start of a
NUMA node and results in memory misconfiguration - leading to
WARN_ON()s and other funnies.  The bug was discovered in devel
branch where 32bit too uses this code path for NUMA init.  If a
node is above the addressing limit, max_pfn ends up lower than
the node triggering this problem.

The failure hasn't been observed on x86-64 but is still possible
with broken hardware e820/NUMA info.  As the fix is very low
risk, it would be better to apply it even for 64bit.

Fix it by using >= instead of ==.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
[ Extracted the actual fix from the original patch and rewrote patch description. ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110501171204.GO29280@htj.dyndns.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors
Boris Ostrovsky [Fri, 29 Apr 2011 21:47:43 +0000 (17:47 -0400)]
x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors

Older AMD K8 processors (Revisions A-E) are affected by erratum
400 (APIC timer interrupts don't occur in C states greater than
C1). This, for example, means that X86_FEATURE_ARAT flag should
not be set for these parts.

This addresses regression introduced by commit
b87cf80af3ba4b4c008b4face3c68d604e1715c6 ("x86, AMD: Set ARAT
feature on AMD processors") where the system may become
unresponsive until external interrupt (such as keyboard input)
occurs. This results, for example, in time not being reported
correctly, lack of progress on the system and other lockups.

Reported-by: Joerg-Volker Peetz <jvpeetz@web.de>
Tested-by: Joerg-Volker Peetz <jvpeetz@web.de>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Boris Ostrovsky <Boris.Ostrovsky@amd.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1304113663-6586-1-git-send-email-ostr@amd64.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoi2c-parport: Fix adapter list handling
Jean Delvare [Sun, 1 May 2011 16:18:49 +0000 (18:18 +0200)]
i2c-parport: Fix adapter list handling

Use a standard list with proper locking to handle the list of
adapters. Thankfully it only matters on systems with more than one
parallel port, which are very rare.

Thanks to Lukasz Kapiec for reporting the problem to me.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
13 years agoi2c-i801: Move device ID definitions to driver
Jean Delvare [Sun, 1 May 2011 16:18:49 +0000 (18:18 +0200)]
i2c-i801: Move device ID definitions to driver

Move the SMBus device ID definitions of recent devices from pci_ids.h
to the i2c-i801.c driver file. They don't have to be shared, as they
are clearly identified and only used in this driver. In the future,
such IDs will go to i2c-i801 directly. This will make adding support
for new devices much faster and easier, as it will avoid cross-
subsystem patch sets and merge conflicts.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Seth Heasley <seth.heasley@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agohwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register fails
Axel Lin [Sun, 1 May 2011 15:34:55 +0000 (11:34 -0400)]
hwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register fails

The driver did not return an error if the call to hwmon_device_register failed.
Fix by returning the error reported from hwmon_device_register.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
13 years agoMerge branch 'fixes-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Linus Torvalds [Sat, 30 Apr 2011 16:15:40 +0000 (09:15 -0700)]
Merge branch 'fixes-2.6.39' of git://git./linux/kernel/git/tj/wq

* 'fixes-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix deadlock in worker_maybe_bind_and_lock()
  workqueue: Document debugging tricks

Fix up trivial spelling conflict in kernel/workqueue.c

13 years agoCLKDEV: Fix clkdev return value for NULL clk case
Russell King [Sat, 30 Apr 2011 09:14:08 +0000 (10:14 +0100)]
CLKDEV: Fix clkdev return value for NULL clk case

clkdev may incorrectly cause a clkdev entry with a NULL clk to return
-ENOENT.  This is not the intention of this code; -ENOENT should only
be returned if the clock entry can not be found in the table.  Fix
this.

Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Fri, 29 Apr 2011 23:27:52 +0000 (16:27 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] pmcraid: reject negative request size
  [SCSI] put stricter guards on queue dead checks
  [SCSI] scsi_dh: fix reference counting in scsi_dh_activate error path
  [SCSI] mpt2sas: prevent heap overflows and unchecked reads

13 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Apr 2011 22:08:53 +0000 (15:08 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86, nmi: Move LVT un-masking into irq handlers
  perf events, x86: Work around the Nehalem AAJ80 erratum
  perf, x86: Fix BTS condition
  ftrace: Build without frame pointers on Microblaze

13 years agoMerge branch 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Apr 2011 22:08:31 +0000 (15:08 -0700)]
Merge branch 'timer-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Initialize CLOCK_ID to HRTIMER_BASE table statically
  rtc: max8925: Call dev_set_drvdata before rtc_device_register

13 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 29 Apr 2011 22:07:19 +0000 (15:07 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: ce4100: Configure IOAPIC pins for USB and SATA to level type
  x86: devicetree: Configure IOAPIC pin only once
  x86, setup: When probing memory with e801, use ax/bx as a pair

13 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Fri, 29 Apr 2011 21:58:34 +0000 (14:58 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (lm85) Fix error paths in probe function
  hwmon: (lm85) Add missing list terminators
  hwmon: (adm1021) Clarify documentation regarding Xeon processors
  hwmon: (lm90) Fix update interval information in driver documentation
  hwmon: (lm90) Add support for ADT7461A and NCT1008

13 years agomii: add support of pause frames in mii_get_an
artpol [Wed, 27 Apr 2011 17:49:14 +0000 (17:49 +0000)]
mii: add support of pause frames in mii_get_an

Add support of pause frames advertise in mii_get_an. This provides all drivers
that use mii_ethtool_gset to represent their own and Link partner flow control
abilities in ethtool.

Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: ftmac100: fix scheduling while atomic during PHY link status change
Adam Jaremko [Thu, 28 Apr 2011 07:41:18 +0000 (07:41 +0000)]
net: ftmac100: fix scheduling while atomic during PHY link status change

Signed-off-by: Adam Jaremko <adam.jaremko@gmail.com>
Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agousbnet: Transfer of maintainership
Oliver Neukum [Fri, 29 Apr 2011 12:15:53 +0000 (14:15 +0200)]
usbnet: Transfer of maintainership

Somebody has to do it, however unfortunate be the cause.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agousbnet: add support for some Huawei modems with cdc-ether ports
Dan Williams [Wed, 27 Apr 2011 09:54:28 +0000 (09:54 +0000)]
usbnet: add support for some Huawei modems with cdc-ether ports

Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether
compatible ports, so recognize and expose them.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2: cancel timer on device removal
Neil Horman [Tue, 26 Apr 2011 10:30:11 +0000 (10:30 +0000)]
bnx2: cancel timer on device removal

This oops was recently reported to me:

invalid opcode: 0000 [#1] SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device
CPU 1
Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]

Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]
Pid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21
-[797251Z]-
RIP: 0010:[<ffffffffa058b270>]  [<ffffffffa058b270>] 0xffffffffa058b270
RSP: 0018:ffff880002083e48  EFLAGS: 00010246
RAX: ffff880002083e90 RBX: ffff88007ccd4000 RCX: 0000000000000000
RDX: 0000000000000100 RSI: dead000000200200 RDI: ffff8800007b8700
RBP: ffff880002083ed0 R08: ffff88000208db40 R09: 0000022d191d27c8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800007b9bc8
R13: ffff880002083e90 R14: ffff8800007b8700 R15: ffffffffa058b270
FS:  00007fbb3bcf7700(0000) GS:ffff880002080000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001664a98 CR3: 0000000060395000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process pidof (pid: 23900, threadinfo ffff8800007e8000, task ffff8800091c0040)
Stack:
 ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820
<0> ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000
<0> ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d
Call Trace:
 <IRQ>
 [<ffffffff81079f77>] ? run_timer_softirq+0x197/0x340
 [<ffffffff8109e010>] ? tick_sched_timer+0x0/0xc0
 [<ffffffff8102a00d>] ? lapic_next_event+0x1d/0x30
 [<ffffffff8106f737>] __do_softirq+0xb7/0x1e0
 [<ffffffff81092cc0>] ? hrtimer_interrupt+0x140/0x250
 [<ffffffff81185f90>] ? filldir+0x0/0xe0
 [<ffffffff8100c2cc>] call_softirq+0x1c/0x30
 [<ffffffff8100df05>] do_softirq+0x65/0xa0
 [<ffffffff8106f525>] irq_exit+0x85/0x90
 [<ffffffff814e3340>] smp_apic_timer_interrupt+0x70/0x9b
 [<ffffffff8100bc93>] apic_timer_interrupt+0x13/0x20
 <EOI>
 [<ffffffff81211ba5>] ? selinux_file_permission+0x45/0x150
 [<ffffffff81262a75>] ? _atomic_dec_and_lock+0x55/0x80
 [<ffffffff812050c6>] security_file_permission+0x16/0x20
 [<ffffffff811861c1>] vfs_readdir+0x71/0xe0
 [<ffffffff81186399>] sys_getdents+0x89/0xf0
 [<ffffffff8100b172>] system_call_fastpath+0x16/0x1b

It occured during some stress testing, in which the reporter was repeatedly
removing and modprobing the bnx2 module while doing various other random
operations on the bnx2 registered net device.  Noting that this error occured on
a serdes based device, we noted that there were a few ethtool operations (most
notably self_test and set_phys_id) that have execution paths that lead into
bnx2_setup_serdes_phy.  This function is notable because it executes a mod_timer
call, which starts the bp->timer running.  Currently bnx2 is setup to assume
that this timer only nees to be stopped when bnx2_close or bnx2_suspend is
called.  Since the above ethtool operations are not gated on the net device
having been opened however, that assumption is incorrect, and can lead to the
timer still running after the module has been removed, leading to the oops above
(as well as other simmilar oopses).

Fix the problem by ensuring that the timer is stopped when pci_device_unregister
is called.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Hushan Jia <hjia@redhat.com>
CC: Michael Chan <mchan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoiwl4965: fix "Received BA when not expected"
Stanislaw Gruszka [Fri, 29 Apr 2011 15:51:56 +0000 (17:51 +0200)]
iwl4965: fix "Received BA when not expected"

Need to use broadcast sta_id for management frames, otherwise we broke
BA session in the firmware and get messages like that:

"Received BA when not expected"

or (on older kernels):

"BA scd_flow 0 does not match txq_id 10"

This fix regression introduced in 2.6.35 during station management
code rewrite by:

commit 2a87c26bbe9587baeb9e56d3ce0b4971bd777643
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Apr 30 11:30:45 2010 -0700

    iwlwifi: use iwl_find_station less

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoiwlagn: fix "Received BA when not expected"
Stanislaw Gruszka [Fri, 29 Apr 2011 15:51:06 +0000 (17:51 +0200)]
iwlagn: fix "Received BA when not expected"

Need to use broadcast sta_id for management frames, otherwise we broke
BA session in the firmware and get messages like that:

"Received BA when not expected"

or (on older kernels):

"BA scd_flow 0 does not match txq_id 10"

This fix regression introduced in 2.6.35 during station management
code rewrite by:

commit 2a87c26bbe9587baeb9e56d3ce0b4971bd777643
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Apr 30 11:30:45 2010 -0700

    iwlwifi: use iwl_find_station less

Patch partially resolve:
https://bugzilla.kernel.org/show_bug.cgi?id=16691
However, there are still 11n performance problems on 4965 and 5xxx
devices that need to be investigated.

Cc: stable@kernel.org # 2.6.35+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoworkqueue: fix deadlock in worker_maybe_bind_and_lock()
Tejun Heo [Fri, 29 Apr 2011 16:08:37 +0000 (18:08 +0200)]
workqueue: fix deadlock in worker_maybe_bind_and_lock()

If a rescuer and stop_machine() bringing down a CPU race with each
other, they may deadlock on non-preemptive kernel.  The CPU won't
accept a new task, so the rescuer can't migrate to the target CPU,
while stop_machine() can't proceed because the rescuer is holding one
of the CPU retrying migration.  GCWQ_DISASSOCIATED is never cleared
and worker_maybe_bind_and_lock() retries indefinitely.

This problem can be reproduced semi reliably while the system is
entering suspend.

 http://thread.gmane.org/gmane.linux.kernel/1122051

A lot of kudos to Thilo-Alexander for reporting this tricky issue and
painstaking testing.

stable: This affects all kernels with cmwq, so all kernels since and
        including v2.6.36 need this fix.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Thilo-Alexander Ginkel <thilo@ginkel.com>
Tested-by: Thilo-Alexander Ginkel <thilo@ginkel.com>
Cc: stable@kernel.org
13 years ago[media] ngene: Fix CI data transfer regression
Oliver Endriss [Tue, 29 Mar 2011 20:35:24 +0000 (17:35 -0300)]
[media] ngene: Fix CI data transfer regression
Fix CI data transfer regression introduced by previous cleanup.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: make sure drivers supply a zeroed struct v4l2_subdev
Herton Ronaldo Krzesinski [Fri, 1 Apr 2011 17:12:02 +0000 (14:12 -0300)]
[media] v4l: make sure drivers supply a zeroed struct v4l2_subdev

Some v4l drivers currently don't initialize their struct v4l2_subdev
with zeros, and this is a problem since some of the v4l2 code expects
this. One example is the addition of internal_ops in commit 45f6f84,
after that we are at risk of random oopses with these drivers when code
in v4l2_device_register_subdev tries to dereference sd->internal_ops->*,
as can be shown by the report at http://bugs.launchpad.net/bugs/745213
and analysis of its crash at https://lkml.org/lkml/2011/4/1/168

Use kzalloc within problematic drivers to ensure we have a zeroed struct
v4l2_subdev.

BugLink: http://bugs.launchpad.net/bugs/745213
Cc: <stable@kernel.org>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agoMerge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 29 Apr 2011 14:54:48 +0000 (07:54 -0700)]
Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP3+: voltage: remove initial voltage
  OMAP4: Intialize IVA Device in addition to DSP device.
  omap: rx51: mark reserved memory earlier
  OMAP3: l3: fix for "irq 10: nobody cared" message
  arm: omap2: enable smc instruction for sleep34xx
  OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.
  OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL
  OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad area
  OMAP4: clock data: Change DSS clock aliases
  OMAP2+: hwmod data: Fix wrong dma_system end address

13 years agoARM: 6891/1: prevent heap corruption in OABI semtimedop
Dan Rosenberg [Fri, 29 Apr 2011 14:48:07 +0000 (15:48 +0100)]
ARM: 6891/1: prevent heap corruption in OABI semtimedop

When CONFIG_OABI_COMPAT is set, the wrapper for semtimedop does not
bound the nsops argument.  A sufficiently large value will cause an
integer overflow in allocation size, followed by copying too much data
into the allocated buffer.  Fix this by restricting nsops to SEMOPM.
Untested.

Cc: stable@kernel.org
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
13 years ago[media] Missing frontend config for LME DM04/QQBOX
Malcolm Priestley [Tue, 22 Feb 2011 06:14:34 +0000 (03:14 -0300)]
[media] Missing frontend config for LME DM04/QQBOX

Forgot to add the DVB_STV0299/DVB_PLL to config

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] rc_core: avoid kernel oops when rmmod saa7134
Hussam Al-Tayeb [Mon, 21 Feb 2011 18:20:26 +0000 (15:20 -0300)]
[media] rc_core: avoid kernel oops when rmmod saa7134

The following is a patch to avoid a kernel oops when running rmmod
saa7134 on kernel 2.6.27.1. The change is as suggested by mchehab on
irc.freenode.org

Signed-off-by: Hussam Al-Tayeb <ht990332@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agohwmon: (lm85) Fix error paths in probe function
Jean Delvare [Fri, 29 Apr 2011 14:33:36 +0000 (16:33 +0200)]
hwmon: (lm85) Fix error paths in probe function

We must remove all files we created, even in error cases.

Fixes second part of kernel bug #34072:
https://bugzilla.kernel.org/show_bug.cgi?id=34072

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
13 years agohwmon: (lm85) Add missing list terminators
Jean Delvare [Fri, 29 Apr 2011 14:33:36 +0000 (16:33 +0200)]
hwmon: (lm85) Add missing list terminators

Fixes kernel bug #34072:
https://bugzilla.kernel.org/show_bug.cgi?id=34072

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
13 years agohwmon: (adm1021) Clarify documentation regarding Xeon processors
Jean Delvare [Fri, 29 Apr 2011 14:33:36 +0000 (16:33 +0200)]
hwmon: (adm1021) Clarify documentation regarding Xeon processors

Recent Xeon processor thermal sensors are supported by the coretemp
driver and not the adm1021 driver. Only one old generation of Xeon
processors (the first Netburst ones) are supported by the adm1021
driver.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>