arm64: mm: allow passing a pgdir to alloc_init_*

To allow us to initialise pgdirs which are fixmapped, allow explicitly
passing a pgdir rather than an mm. A new __create_pgd_mapping function
is added for this, with existing __create_mapping callers migrated to
this.

The mm argument was previously only used at the top level. Now that it
is redundant at all levels, it is removed. To indicate its new found
similarity to alloc_init_{pud,pmd,pte}, __create_mapping is renamed to
init_pgd.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 11509a306bb6ea595878b2d246d2d56b1783e040)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: allocate pagetables anywhere

Now that create_mapping uses fixmap slots to modify pte, pmd, and pud
entries, we can access page tables anywhere in physical memory,
regardless of the extent of the linear mapping.

Given that, we no longer need to limit memblock allocations during page
table creation, and can leave the limit as its default
MEMBLOCK_ALLOC_ANYWHERE.

We never add memory which will fall outside of the linear map range
given phys_offset and MAX_MEMBLOCK_ADDR are configured appropriately, so
any tables we create will fall in the linear map of the final tables.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit cdef5f6e9e0e5ee397759b664a9f875ff59ccf01)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: use fixmap when creating page tables

As a preparatory step to allow us to allocate early page tables from
unmapped memory using memblock_alloc, modify the __create_mapping
callees to map and unmap the tables they modify using fixmap entries.

All but the top-level pgd initialisation is performed via the fixmap.
Subsequent patches will inject the pgd physical address, and migrate to
using the FIX_PGD slot.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit f4710445458c0a1bd1c3c014ada2e7d7dc7b882f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: add functions to walk tables in fixmap

As a preparatory step to allow us to allocate early page tables from
unmapped memory using memblock_alloc, add new p??_{set,clear}_fixmap*
functions which can be used to walk page tables outside of the linear
mapping by using fixmap slots.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 961faac114819a01e627fe9c9c82b830bb3849d4)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: add __{pud,pgd}_populate

We currently have __pmd_populate for creating a pmd table entry given
the physical address of a pte, but don't have equivalents for the pud or
pgd levels of table.

To enable us to manipulate tables which are mapped outside of the linear
mapping (where we have a PA, but not a linear map VA), it is useful to
have these functions.

This patch adds __{pud,pgd}_populate. As these should not be called when
the kernel uses folded {pmd,pud}s, in these cases they expand to
BUILD_BUG(). So long as the appropriate checks are made on the {pud,pgd}
entry prior to attempting population, these should be optimized out at
compile time.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 1e531cce68c92b46c7d29f36a72f9a3e5886678f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: avoid redundant __pa(__va(x))

When we "upgrade" to a section mapping, we free any table we made
redundant by giving it back to memblock. To get the PA, we acquire the
physical address and convert this to a VA, then subsequently convert
this back to a PA.

This works currently, but will not work if the tables are not accessed
via linear map VAs (e.g. is we use fixmap slots).

This patch uses {pmd,pud}_page_paddr to acquire the PA. This avoids the
__pa(__va()) round trip, saving some work and avoiding reliance on the
linear mapping.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 316b39db06718d59d82736df9fc65cf05b467cc7)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: add functions to walk page tables by PA

To allow us to walk tables allocated into the fixmap, we need to acquire
the physical address of a page, rather than the virtual address in the
linear map.

This patch adds new p??_page_paddr and p??_offset_phys functions to
acquire the physical address of a next-level table, and changes
p??_offset* into macros which simply convert this to a linear map VA.
This renders p??_page_vaddr unused, and hence they are removed.

At the pgd level, a new pgd_offset_raw function is added to find the
relevant PGD entry given the base of a PGD and a virtual address.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit dca56dca7124709f3dfca81afe61b4d98eb9cacf)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: move pte_* macros

For pmd, pud, and pgd levels of table, functions including p?d_index and
p?d_offset are defined after the p?d_page_vaddr function for the
immediately higher level of table.

The pte functions however are defined much earlier, even though several
rely on the later definition of pmd_page_vaddr. While this isn't
currently a problem as these are macros, it prevents the logical
grouping of later C functions (which cannot rely on prototypes for
functions not yet defined).

Move these definitions after pmd_page_vaddr, for consistency with the
placement of these functions for other levels of table.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 053520f7d3923cc6d37afb28f9887cb1e7d77454)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: kasan: avoid TLB conflicts

The page table modification performed during the KASAN init risks the
allocation of conflicting TLB entries, as it swaps a set of valid global
entries for another without suitable TLB maintenance.

The presence of conflicting TLB entries can result in the delivery of
synchronous TLB conflict aborts, or may result in the use of erroneous
data being returned in response to a TLB lookup. This can affect
explicit data accesses from software as well as translations performed
asynchronously (e.g. as part of page table walks or speculative I-cache
fetches), and can therefore result in a wide variety of problems.

To avoid this, use cpu_replace_ttbr1 to swap the page tables. This
ensures that when the new tables are installed there are no stale
entries from the old tables which may conflict. As all updates are made
to the tables while they are not active, the updates themselves are
safe.

At the same time, add the missing barrier to ensure that the tmp_pg_dir
entries updated via memcpy are visible to the page table walkers at the
point the tmp_pg_dir is installed. All other page table updates made as
part of KASAN initialisation have the requisite barriers due to the use
of the standard page table accessors.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit c1a88e9124a499939ebd8069d5e4d3937f019157)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: add code to safely replace TTBR1_EL1

If page tables are modified without suitable TLB maintenance, the ARM
architecture permits multiple TLB entries to be allocated for the same
VA. When this occurs, it is permitted that TLB conflict aborts are
raised in response to synchronous data/instruction accesses, and/or and
amalgamation of the TLB entries may be used as a result of a TLB lookup.

The presence of conflicting TLB entries may result in a variety of
behaviours detrimental to the system (e.g. erroneous physical addresses
may be used by I-cache fetches and/or page table walks). Some of these
cases may result in unexpected changes of hardware state, and/or result
in the (asynchronous) delivery of SError.

To avoid these issues, we must avoid situations where conflicting
entries may be allocated into TLBs. For user and module mappings we can
follow a strict break-before-make approach, but this cannot work for
modifications to the swapper page tables that cover the kernel text and
data.

Instead, this patch adds code which is intended to be executed from the
idmap, which can safely unmap the swapper page tables as it only
requires the idmap to be active. This enables us to uninstall the active
TTBR1_EL1 entry, invalidate TLBs, then install a new TTBR1_EL1 entry
without potentially unmapping code or data required for the sequence.
This avoids the risk of conflict, but requires that updates are staged
in a copy of the swapper page tables prior to being installed.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 50e1881ddde2a986c7d0d2150985239e5e3d7d96)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: add function to install the idmap

In some cases (e.g. when making invasive changes to the kernel page
tables) we will need to execute code from the idmap.

Add a new helper which may be used to install the idmap, complementing
the existing cpu_uninstall_idmap.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 609116d202a8c5fd3fe393eb85373cbee906df68)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: unmap idmap earlier

During boot we leave the idmap in place until paging_init, as we
previously had to wait for the zero page to become allocated and
accessible.

Now that we have a statically-allocated zero page, we can uninstall the
idmap much earlier in the boot process, making it far easier to spot
accidental use of physical addresses. This also brings the cold boot
path in line with the secondary boot path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 86ccce896cb0aa800a7a6dcd29b41ffc4eeb1a75)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: unify idmap removal

We currently open-code the removal of the idmap and restoration of the
current task's MMU state in a few places.

Before introducing yet more copies of this sequence, unify these to call
a new helper, cpu_uninstall_idmap.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 9e8e865bbe294a69666a1996bda3e87825b258c0)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: place empty_zero_page in bss

Currently the zero page is set up in paging_init, and thus we cannot use
the zero page earlier. We use the zero page as a reserved TTBR value
from which no TLB entries may be allocated (e.g. when uninstalling the
idmap). To enable such usage earlier (as may be required for invasive
changes to the kernel page tables), and to minimise the time that the
idmap is active, we need to be able to use the zero page before
paging_init.

This patch follows the example set by x86, by allocating the zero page
at compile time, in .bss. This means that the zero page itself is
available immediately upon entry to start_kernel (as we zero .bss before
this), and also means that the zero page takes up no space in the raw
Image binary. The associated struct page is allocated in bootmem_init,
and remains unavailable until this time.

Outside of arch code, the only users of empty_zero_page assume that the
empty_zero_page symbol refers to the zeroed memory itself, and that
ZERO_PAGE(x) must be used to acquire the associated struct page,
following the example of x86. This patch also brings arm64 inline with
these assumptions.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 5227cfa71f9e8574373f4d0e9e754942d76cdf67)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: specialise pagetable allocators

We pass a size parameter to early_alloc and late_alloc, but these are
only ever used to allocate single pages. In late_alloc we always
allocate a single page.

Both allocators provide us with zeroed pages (such that all entries are
invalid), but we have no barriers between allocating a page and adding
that page to existing (live) tables. A concurrent page table walk may
see stale data, leading to a number of issues.

This patch specialises the two allocators for page tables. The size
parameter is removed and the necessary dsb(ishst) is folded into each.
To make it clear that the functions are intended for use for page table
allocation, they are renamed to {early,late}_pgtable_alloc, with the
related function pointed renamed to pgtable_alloc.

As the dsb(ishst) is now in the allocator, the existing barrier for the
zero page is redundant and thus is removed. The previously missing
include of barrier.h is added.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 21ab99c289d350f4ae454bc069870009db6df20e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

asm-generic: Fix local variable shadow in __set_fixmap_offset

Currently __set_fixmap_offset is a macro function which has a local
variable called 'addr'. If a caller passes a 'phys' parameter which is
derived from a variable also called 'addr', the local variable will
shadow this, and the compiler will complain about the use of an
uninitialized variable. To avoid the issue with namespace clashes,
'addr' is prefixed with a liberal sprinkling of underscores.

Turning __set_fixmap_offset into a static inline breaks the build for
several architectures. Fixing this properly requires updates to a number
of architectures to make them agree on the prototype of __set_fixmap (it
could be done as a subsequent patch series).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
[catalin.marinas@arm.com: squashed the original function patch and macro fixup]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 3694bd76781b76c4f8d2ecd85018feeb1609f0e5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules

By default the aarch64 gcc generates .eh_frame sections.  Unlike
.debug_frame sections, the .eh_frame sections are loaded into memory
when the associated code is loaded.  On an example kernel being built
with this default the .eh_frame section in vmlinux used an extra 1.7MB
of memory.  The x86 disables the creation of the .eh_frame section.
The aarch64 should probably do the same to save some memory.

Signed-off-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 728dabd6d1751cf5e0f8e0535891393da62396e9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
pick 67dfa1751 arm64: errata: Add -mpc-relative-literal-loads
in arch/arm64/Makefile

arm64: Fix an enum typo in mm/dump.c

This patch fixes a typo in mm/dump.c:
"MODUELS_END_NR" should be "MODULES_END_NR".

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit b3122023df935cf14bf951da98ca598d71b9f826)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: kasan: ensure that the KASAN zero page is mapped read-only

When switching from the early KASAN shadow region, which maps the
entire shadow space read-write, to the permanent KASAN shadow region,
which uses a zero page to shadow regions that are not subject to
instrumentation, the lowest level table kasan_zero_pte[] may be
reused unmodified, which means that the mappings of the zero page
that it contains will still be read-write.

So update it explicitly to map the zero page read only when we
activate the permanent mapping.

Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 7b1af9795773d745c2a8c7d4ca5f2936e8b6adfb)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arch/arm64/include/asm/pgtable.h: add pmd_mkclean for THP

MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite
of the contents since MADV_FREE syscall is called for THP page.

This patch adds pmd_mkclean for THP page MADV_FREE support.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Shaohua Li <shli@kernel.org>
Cc: <yalin.wang2010@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jason Evans <je@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttil <mika.penttila@nextfour.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Shaohua Li <shli@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 05ee26d9e7e29ab026995eab79be3c6e8351908c)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: hide __efistub_ aliases from kallsyms

Commit e8f3010f7326 ("arm64/efi: isolate EFI stub from the kernel
proper") isolated the EFI stub code from the kernel proper by prefixing
all of its symbols with __efistub_, and selectively allowing access to
core kernel symbols from the stub by emitting __efistub_ aliases for
functions and variables that the stub can access legally.

As an unintended side effect, these aliases are emitted into the
kallsyms symbol table, which means they may turn up in backtraces,
e.g.,

  ...
  PC is at __efistub_memset+0x108/0x200
  LR is at fixup_init+0x3c/0x48
  ...
  [<ffffff8008328608>] __efistub_memset+0x108/0x200
  [<ffffff8008094dcc>] free_initmem+0x2c/0x40
  [<ffffff8008645198>] kernel_init+0x20/0xe0
  [<ffffff8008085cd0>] ret_from_fork+0x10/0x40

The backtrace in question has nothing to do with the EFI stub, but
simply returns one of the several aliases of memset() that have been
recorded in the kallsyms table. This is undesirable, since it may
suggest to people who are not aware of this that the issue they are
seeing is somehow EFI related.

So hide the __efistub_ aliases from kallsyms, by emitting them as
absolute linker symbols explicitly. The distinction between those
and section relative symbols is completely irrelevant to these
definitions, and to the final link we are performing when these
definitions are being taken into account (the distinction is only
relevant to symbols defined inside a section definition when performing
a partial link), and so the resulting values are identical to the
original ones. Since absolute symbols are ignored by kallsyms, this
will result in these values to be omitted from its symbol table.

After this patch, the backtrace generated from the same address looks
like this:
  ...
  PC is at __memset+0x108/0x200
  LR is at fixup_init+0x3c/0x48
  ...
  [<ffffff8008328608>] __memset+0x108/0x200
  [<ffffff8008094dcc>] free_initmem+0x2c/0x40
  [<ffffff8008645198>] kernel_init+0x20/0xe0
  [<ffffff8008085cd0>] ret_from_fork+0x10/0x40

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 75feee3d9d51775072d3a04f47d4a439a4c4590e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: head.S: use memset to clear BSS

Currently we use an open-coded memzero to clear the BSS. As it is a
trivial implementation, it is sub-optimal.

Our optimised memset doesn't use the stack, is position-independent, and
for the memzero case can use of DC ZVA to clear large blocks
efficiently. In __mmap_switched the MMU is on and there are no live
caller-saved registers, so we can safely call an uninstrumented memset.

This patch changes __mmap_switched to use memset when clearing the BSS.
We use the __pi_memset alias so as to avoid any instrumentation in all
kernel configurations.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 2a803c4db615d85126c5c7afd5849a3cfde71422)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

efi: stub: define DISABLE_BRANCH_PROFILING for all architectures

This moves the DISABLE_BRANCH_PROFILING define from the x86 specific
to the general CFLAGS definition for the stub. This fixes build errors
when building for arm64 with CONFIG_PROFILE_ALL_BRANCHES_ENABLED.

Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit b523e185bba36164ca48a190f5468c140d815414)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: entry: remove pointless SPSR mode check

In work_pending, we may skip work if the stacked SPSR value represents
anything other than an EL0 context. We then immediately invoke the
kernel_exit 0 macro as part of ret_to_user, assuming a return to EL0.
This is somewhat confusing.

We use work_pending as part of the ret_to_user/ret_fast_syscall state
machine. We only use ret_fast_syscall in the return from an SVC issued
from EL0. We use ret_to_user for return from EL0 exception handlers and
also for return from ret_from_fork in the case the task was not a kernel
thread (i.e. it is a user task).

Thus in all cases the stacked SPSR value must represent an EL0 context,
and the check is redundant. This patch removes it, along with the now
unused no_work_pending label.

Cc: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit ee03353bc04f8e460cc4e3da80d9721d9ecb89f1)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: move pgd_cache initialisation to pgtable_cache_init

Initialising the suppport for EFI runtime services requires us to
allocate a pgd off the back of an early_initcall. On systems where the
PGD_SIZE is smaller than PAGE_SIZE (e.g. 64k pages and 48-bit VA), the
pgd_cache isn't initialised at this stage, and we panic with a NULL
dereference during boot:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000

  __create_mapping.isra.5+0x84/0x350
  create_pgd_mapping+0x20/0x28
  efi_create_mapping+0x5c/0x6c
  arm_enable_runtime_services+0x154/0x1e4
  do_one_initcall+0x8c/0x190
  kernel_init_freeable+0x84/0x1ec
  kernel_init+0x10/0xe0
  ret_from_fork+0x10/0x50

This patch fixes the problem by initialising the pgd_cache earlier, in
the pgtable_cache_init callback, which sounds suspiciously like what it
was intended for.

Reported-by: Dennis Chen <dennis.chen@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 39b5be9b4233a9f212b98242bddf008f379b5122)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: module: avoid undefined shift behavior in reloc_data()

Compilers may engage the improbability drive when encountering shifts
by a distance that is a multiple of the size of the operand type. Since
the required bounds check is very simple here, we can get rid of all the
fuzzy masking, shifting and comparing, and use the documented bounds
directly.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit f930896967fa3f9ab16a6f87267b92798308d48f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: module: fix relocation of movz instruction with negative immediate

The test whether a movz instruction with a signed immediate should be
turned into a movn instruction (i.e., when the immediate is negative)
is flawed, since the value of imm is always positive. Also, the
subsequent bounds check is incorrect since the limit update never
executes, due to the fact that the imm_type comparison will always be
false for negative signed immediates.

Let's fix this by performing the sign test on sval directly, and
replacing the bounds check with a simple comparison against U16_MAX.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: tidied up use of sval, renamed MOVK enum value to MOVKZ]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit b24a557527f97ad88619d5bd4c8017c635056d69)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: traps: address fallout from printk -> pr_* conversion

Commit ac7b406c1a9d ("arm64: Use pr_* instead of printk") was a fairly
mindless s/printk/pr_*/ change driven by a complaint from checkpatch.

As is usual with such changes, this has led to some odd behaviour on
arm64:

  * syslog now picks up the "pr_emerg" line from dump_backtrace, but not
    the actual trace, which leads to a bunch of "kernel:Call trace:"
    lines in the log

  * __{pte,pmd,pgd}_error print at KERN_CRIT, as opposed to KERN_ERR
    which is used by other architectures.

This patch restores the original printk behaviour for dump_backtrace
and downgrade the pgtable error macros to KERN_ERR.

Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit c9cd0ed925c0b927283d4739bfe689eb9d1e9dfd)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: ftrace: fix a stack tracer's output under function graph tracer

Function graph tracer modifies a return address (LR) in a stack frame
to hook a function return. This will result in many useless entries
(return_to_handler) showing up in
 a) a stack tracer's output
 b) perf call graph (with perf record -g)
 c) dump_backtrace (at panic et al.)

For example, in case of a),
  $ echo function_graph > /sys/kernel/debug/tracing/current_tracer
  $ echo 1 > /proc/sys/kernel/stack_trace_enabled
  $ cat /sys/kernel/debug/tracing/stack_trace
        Depth    Size   Location    (54 entries)
        -----    ----   --------
  0)     4504      16   gic_raise_softirq+0x28/0x150
  1)     4488      80   smp_cross_call+0x38/0xb8
  2)     4408      48   return_to_handler+0x0/0x40
  3)     4360      32   return_to_handler+0x0/0x40
  ...

In case of b),
  $ echo function_graph > /sys/kernel/debug/tracing/current_tracer
  $ perf record -e mem:XXX:x -ag -- sleep 10
  $ perf report
                  ...
                  |          |          |--0.22%-- 0x550f8
                  |          |          |          0x10888
                  |          |          |          el0_svc_naked
                  |          |          |          sys_openat
                  |          |          |          return_to_handler
                  |          |          |          return_to_handler
                  ...

In case of c),
  $ echo function_graph > /sys/kernel/debug/tracing/current_tracer
  $ echo c > /proc/sysrq-trigger
  ...
  Call trace:
  [<ffffffc00044d3ac>] sysrq_handle_crash+0x24/0x30
  [<ffffffc000092250>] return_to_handler+0x0/0x40
  [<ffffffc000092250>] return_to_handler+0x0/0x40
  ...

This patch replaces such entries with real addresses preserved in
current->ret_stack[] at unwind_frame(). This way, we can cover all
the cases.

Reviewed-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[will: fixed minor context changes conflicting with irq stack bits]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 20380bb390a443b2c5c8800cec59743faf8151b4)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: pass a task parameter to unwind_frame()

Function graph tracer modifies a return address (LR) in a stack frame
to hook a function's return. This will result in many useless entries
(return_to_handler) showing up in a call stack list.
We will fix this problem in a later patch ("arm64: ftrace: fix a stack
tracer's output under function graph tracer"). But since real return
addresses are saved in ret_stack[] array in struct task_struct,
unwind functions need to be notified of, in addition to a stack pointer
address, which task is being traced in order to find out real return
addresses.

This patch extends unwind functions' interfaces by adding an extra
argument of a pointer to task_struct.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit fe13f95b720075327a761fe6ddb45b0c90cab504)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: ftrace: modify a stack frame in a safe way

Function graph tracer modifies a return address (LR) in a stack frame by
calling ftrace_prepare_return() in a traced function's function prologue.
The current code does this modification before preserving an original
address at ftrace_push_return_trace() and there is always a small window
of inconsistency when an interrupt occurs.

This doesn't matter, as far as an interrupt stack is introduced, because
stack tracer won't be invoked in an interrupt context. But it would be
better to proactively minimize such a window by moving the LR modification
after ftrace_push_return_trace().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 79fdee9b6355c9720f14717e1ad66af51bb331b5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: remove irq_count and do_softirq_own_stack()

sysrq_handle_reboot() re-enables interrupts while on the irq stack. The
irq_stack implementation wrongly assumed this would only ever happen
via the softirq path, allowing it to update irq_count late, in
do_softirq_own_stack().

This means if an irq occurs in sysrq_handle_reboot(), during
emergency_restart() the stack will be corrupted, as irq_count wasn't
updated.

Lose the optimisation, and instead of moving the adding/subtracting of
irq_count into irq_stack_entry/irq_stack_exit, remove it, and compare
sp_el0 (struct thread_info) with sp & ~(THREAD_SIZE - 1). This tells us
if we are on a task stack, if so, we can safely switch to the irq stack.
Finally, remove do_softirq_own_stack(), we don't need it anymore.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
[will: use get_thread_info macro]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit d224a69e3d80fe08f285d1f41d21b590bae4fa9f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: hugetlb: add support for PTE contiguous bit

The arm64 MMU supports a Contiguous bit which is a hint that the TTE
is one of a set of contiguous entries which can be cached in a single
TLB entry.  Supporting this bit adds new intermediate huge page sizes.

The set of huge page sizes available depends on the base page size.
Without using contiguous pages the huge page sizes are as follows.

 4KB:   2MB  1GB
64KB: 512MB

With a 4KB granule, the contiguous bit groups together sets of 16 pages
and with a 64KB granule it groups sets of 32 pages.  This enables two new
huge page sizes in each case, so that the full set of available sizes
is as follows.

 4KB:  64KB   2MB  32MB  1GB
64KB:   2MB 512MB  16GB

If a 16KB granule is used then the contiguous bit groups 128 pages
at the PTE level and 32 pages at the PMD level.

If the base page size is set to 64KB then 2MB pages are enabled by
default.  It is possible in the future to make 2MB the default huge
page size for both 4KB and 64KB granules.

Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: David Woods <dwoods@ezchip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 66b3923a1a0f77a563b43f43f6ad091354abbfe9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Use PoU cache instr for I/D coherency

In systems with three levels of cache(PoU at L1 and PoC at L3),
PoC cache flush instructions flushes L2 and L3 caches which could affect
performance.
For cache flushes for I and D coherency, PoU should suffice.
So changing all I and D coherency related cache flushes to PoU.

Introduced a new __clean_dcache_area_pou API for dcache flush till PoU
and provided a common macro for __flush_dcache_area and
__clean_dcache_area_pou.

Also, now in __sync_icache_dcache, icache invalidation for non-aliasing
VIPT icache is done only for that particular page instead of the earlier
__flush_icache_all.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 0a28714c53fd4f7aea709be7577dfbe0095c8c3e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
included reset_pmuserenr_el0 in arch/arm64/mm/proc-macros.S

arm64: Defer dcache flush in __cpu_copy_user_page

Defer dcache flushing to __sync_icache_dcache by calling
flush_dcache_page which clears PG_dcache_clean flag.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit e6b1185f77351aa154e63bd54b05d07ff99d4ffa)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: reduce stack use in irq_handler

The code for switching to irq_stack stores three pieces of information on
the stack, fp+lr, as a fake stack frame (that lets us walk back onto the
interrupted tasks stack frame), and the address of the struct pt_regs that
contains the register values from kernel entry. (which dump_backtrace()
will print in any stack trace).

To reduce this, we store fp, and the pointer to the struct pt_regs.
unwind_frame() can recognise this as the irq_stack dummy frame, (as it only
appears at the top of the irq_stack), and use the struct pt_regs values
to find the missing interrupted link-register.

Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 971c67ce37cfeeaf560e792a2c3bc21d8b67163a)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Documentation: add list of software workarounds for errata

It's not immediately obvious which hardware errata are worked around in
the Linux kernel for an arbitrary kernel tree, so add a file to keep
track of what we're working around.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 9cb9c9e5ba8453537e8e645318edf231fe54eaf9)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: place __cpu_setup in .text

We drop __cpu_setup in .text.init, which ends up being part of .text.
The .text.init section was a legacy section name which has been unused
elsewhere for a long time.

The ".text.init" name is misleading if read as a synonym for
".init.text". Any CPU may execute __cpu_setup before turning the MMU on,
so it should simply live in .text.

Remove the pointless section assignment. This will leave __cpu_setup in
the .text section.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit f00083cae331e5d3eecade6b4fdc35d0825e73ef)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: cmpxchg: Don't incldue linux/mmdebug.h

The arm64 asm/cmpxchg.h includes linux/mmdebug.h but doesn't so far as I
can tell actually use anything from it.  Removing the inclusion reduces
spurious header dependency rebuilds and also avoids issues with
recursive inclusions of headers causing build breaks due to attempts to
use things before they are defined if linux/mmdebug.h starts pulling in
more low level headers.

Such errors have happened in -next recently, for example:

In file included from include/linux/completion.h:11:0,
                 from include/linux/rcupdate.h:43,
                 from include/linux/tracepoint.h:19,
                 from include/linux/mmdebug.h:6,
                 from ./arch/arm64/include/asm/cmpxchg.h:22,
                 from ./arch/arm64/include/asm/atomic.h:41,
                 from include/linux/atomic.h:4,
                 from include/linux/spinlock.h:406,
                 from include/linux/seqlock.h:35,
                 from include/linux/time.h:5,
                 from include/uapi/linux/timex.h:56,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:19,
                 from arch/arm64/kernel/asm-offsets.c:21:
include/linux/wait.h: In function 'wait_on_atomic_t':
include/linux/wait.h:1218:2: error: implicit declaration of function 'atomic_read' [-Werror=implicit-function-declaration]
 if (atomic_read(val) == 0)

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 4a6ccf30263f4e265c0f171561bf4c40bed5f273)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: fold alternatives into .init

Currently we treat the alternatives separately from other data that's
only used during initialisation, using separate .altinstructions and
.altinstr_replacement linker sections. These are freed for general
allocation separately from .init*. This is problematic as:

* We do not remove execute permissions, as we do for .init, leaving the
  memory executable.

* We pad between them, making the kernel Image bianry up to PAGE_SIZE
  bytes larger than necessary.

This patch moves the two sections into the contiguous region used for
.init*. This saves some memory, ensures that we remove execute
permissions, and allows us to remove some code made redundant by this
reorganisation.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 9aa4ec1571da62366cfddc20f3b923609604fe63)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Remove redundant padding from linker script

Currently we place an ALIGN_DEBUG_RO between text and data for the .text
and .init sections, and depending on configuration each of these may
result in up to SECTION_SIZE bytes worth of padding (for
DEBUG_RODATA_ALIGN).

We make no distinction between the text and data in each of these
sections at any point when creating the initial page tables in head.S.
We also make no distinction when modifying the tables; __map_memblock,
fixup_executable, mark_rodata_ro, and fixup_init only work at section
granularity. Thus this padding is unnecessary.

For the spit between init text and data we impose a minimum alignment of
16 bytes, but this is also unnecessary. The init data is output
immediately after the padding before any symbols are defined, so this is
not required to keep a symbol for linker a section array correctly
associated with the data. Any objects within the section will be given
at least their usual alignment regardless.

This patch removes the redundant padding.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 5b28cd9d084eca8ddc46270d2720305bfd40e348)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: remove pointless PAGE_MASKing

As pgd_offset{,_k} shift the input address by PGDIR_SHIFT, the sub-page
bits will always be shifted out. There is no need to apply PAGE_MASK
before this.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit e2c30ee320eb96304896c7ab84499e5bc5e5fb6e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: don't call C code with el0's fp register

On entry from el0, we save all the registers on the kernel stack, and
restore them before returning. x29 remains unchanged when we call out
to C code, which will store x29 as the frame-pointer on the stack.

Instead, write 0 into x29 after entry from el0, to avoid any risk of
tracing into user space.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 49003a8d6b35e128ef5e51433e60e783a46fbe5f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: when walking onto the task stack, check sp & fp are in current->stack

When unwind_frame() reaches the bottom of the irq_stack, the last fp
points to the original task stack. unwind_frame() uses
IRQ_STACK_TO_TASK_STACK() to find the sp value. If either values is
wrong, we may end up walking a corrupt stack.

Check these values are sane by testing if they are both on the stack
pointed to by current->stack.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 1ffe199b1c9b72a8e752a9ae2a7af10128ab2ca1)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Add this_cpu_ptr() assembler macro for use in entry.S

irq_stack is a per_cpu variable, that needs to be access from entry.S.
Use an assembler macro instead of the unreadable details.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit aa4d5d3cbc258c355151a3903211b27359390ec5)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: irq: fix walking from irq stack to task stack

Running with CONFIG_DEBUG_SPINLOCK=y can trigger a BUG with the new IRQ
stack code:

  BUG: spinlock lockup suspected on CPU#1

This is due to the IRQ_STACK_TO_TASK_STACK macro incorrectly retrieving
the task stack pointer stashed at the top of the IRQ stack.

Sayeth James:

| Yup, this is what is happening. Its an off-by-one due to broken
| thinking about how the stack works. My broken thinking was:
|
| >   top ------------
| >       | dummy_lr | <- irq_stack_ptr
| >       ------------
| >       |   x29    |
| >       ------------
| >       |   x19    | <- irq_stack_ptr - 0x10
| >       ------------
| >       |   xzr    |
| >       ------------
|
| But the stack-pointer is decreased before use. So it actually looks
| like this:
|
| >       ------------
| >       |          |  <- irq_stack_ptr
| >   top ------------
| >       | dummy_lr |
| >       ------------
| >       |   x29    | <- irq_stack_ptr - 0x10
| >       ------------
| >       |   x19    |
| >       ------------
| >       |   xzr    | <- irq_stack_ptr - 0x20
| >       ------------
|
| The value being used as the original stack is x29, which in all the
| tests is sp but without the current frames data, hence there are no
| missing frames in the output.
|
| Jungseok Lee picked it up with a 32bit user space because aarch32
| can't use x29, so it remains 0 forever. The fix he posted is correct.

This patch fixes the macro and adds some of this wisdom to a comment,
so that the layout of the IRQ stack is well understood.

Cc: James Morse <james.morse@arm.com>
Reported-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 7596abf2e5661d52c4f414f37addeed54e098880)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Add do_softirq_own_stack() and enable irq_stacks

entry.S is modified to switch to the per_cpu irq_stack during el{0,1}_irq.
irq_count is used to detect recursive interrupts on the irq_stack, it is
updated late by do_softirq_own_stack(), when called on the irq_stack, before
__do_softirq() re-enables interrupts to process softirqs.

do_softirq_own_stack() is added by this patch, but does not yet switch
stack.

This patch adds the dummy stack frame and data needed by the previous
stack tracing patches.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 8e23dacd12a48e58125b84c817da50850b73280a)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Modify stack trace and dump for use with irq_stack

This patch allows unwind_frame() to traverse from interrupt stack to task
stack correctly. It requires data from a dummy stack frame, created
during irq_stack_entry(), added by a later patch.

A similar approach is taken to modify dump_backtrace(), which expects to
find struct pt_regs underneath any call to functions marked __exception.
When on an irq_stack, the struct pt_regs is stored on the old task stack,
the location of which is stored in the dummy stack frame.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[james.morse: merged two patches, reworked for per_cpu irq_stacks, and
 no alignment guarantees, added irq_stack definitions]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 132cd887b5c54758d04bf25c52fa48f45e843a30)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Store struct thread_info in sp_el0

There is need for figuring out how to manage struct thread_info data when
IRQ stack is introduced. struct thread_info information should be copied
to IRQ stack under the current thread_info calculation logic whenever
context switching is invoked. This is too expensive to keep supporting
the approach.

Instead, this patch pays attention to sp_el0 which is an unused scratch
register in EL1 context. sp_el0 utilization not only simplifies the
management, but also prevents text section size from being increased
largely due to static allocated IRQ stack as removing masking operation
using THREAD_SIZE in many places.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 6cdf9c7ca687e01840d0215437620a20263012fc)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: Add trace_hardirqs_off annotation in ret_to_user

When a kernel is built with CONFIG_TRACE_IRQFLAGS the following warning
is produced when entering userspace for the first time:

  WARNING: at /work/Linux/linux-2.6-aarch64/kernel/locking/lockdep.c:3519
  Modules linked in:
  CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc3+ #639
  Hardware name: Juno (DT)
  task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
  PC is at check_flags.part.22+0x19c/0x1a8
  LR is at check_flags.part.22+0x19c/0x1a8
  pc : [<ffffffc0000fba6c>] lr : [<ffffffc0000fba6c>] pstate: 600001c5
  sp : ffffffc9768abe10
  x29: ffffffc9768abe10 x28: ffffffc9768a8000
  x27: 0000000000000000 x26: 0000000000000001
  x25: 00000000000000a6 x24: ffffffc00064be6c
  x23: ffffffc0009f249e x22: ffffffc9768a0000
  x21: ffffffc97fea5480 x20: 00000000000001c0
  x19: ffffffc00169a000 x18: 0000005558cc7b58
  x17: 0000007fb78e3180 x16: 0000005558d2e238
  x15: ffffffffffffffff x14: 0ffffffffffffffd
  x13: 0000000000000008 x12: 0101010101010101
  x11: 7f7f7f7f7f7f7f7f x10: fefefefefefeff63
  x9 : 7f7f7f7f7f7f7f7f x8 : 6e655f7371726964
  x7 : 0000000000000001 x6 : ffffffc0001079c4
  x5 : 0000000000000000 x4 : 0000000000000001
  x3 : ffffffc001698438 x2 : 0000000000000000
  x1 : ffffffc9768a0000 x0 : 000000000000002e
  Call trace:
  [<ffffffc0000fba6c>] check_flags.part.22+0x19c/0x1a8
  [<ffffffc0000fc440>] lock_is_held+0x80/0x98
  [<ffffffc00064bafc>] __schedule+0x404/0x730
  [<ffffffc00064be6c>] schedule+0x44/0xb8
  [<ffffffc000085bb0>] ret_to_user+0x0/0x24
  possible reason: unannotated irqs-off.
  irq event stamp: 502169
  hardirqs last  enabled at (502169): [<ffffffc000085a98>] el0_irq_naked+0x1c/0x24
  hardirqs last disabled at (502167): [<ffffffc0000bb3bc>] __do_softirq+0x17c/0x298
  softirqs last  enabled at (502168): [<ffffffc0000bb43c>] __do_softirq+0x1fc/0x298
  softirqs last disabled at (502143): [<ffffffc0000bb830>] irq_exit+0xa0/0xf0

This happens because we disable interrupts in ret_to_user before calling
schedule() in work_resched. This patch adds the necessary
trace_hardirqs_off annotation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit db3899a6477a4dccd26cbfb7f408b6be2cc068e0)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: ftrace: fix the comments for ftrace_modify_code

There is no need to worry about module and __init text disappearing
case, because that ftrace has a module notifier that is called when
a module is being unloaded and before the text goes away and this
code grabs the ftrace_lock mutex and removes the module functions
from the ftrace list, such that it will no longer do any
modifications to that module's text, the update to make functions
be traced or not is done under the ftrace_lock mutex as well.
And by now, __init section codes should not been modified
by ftrace, because it is black listed in recordmcount.c and
ignored by ftrace.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 004ab584e028093996cf5b8e220b8bc50c5111cf)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: ftrace: stop using kstop_machine to enable/disable tracing

For ftrace on arm64, kstop_machine which is hugely disruptive
to a running system is not needed to convert nops to ftrace calls
or back, because that to be modified instrucions, that NOP, B or BL,
are all safe instructions which called "concurrent modification
and execution of instructions", that can be executed by one
thread of execution as they are being modified by another thread
of execution without requiring explicit synchronization.

Signed-off-by: Li Bin <huawei.libin@huawei.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 81a6a146e88eca5d6726569779778d61489d85aa)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: spinlock: serialise spin_unlock_wait against concurrent lockers

Boqun Feng reported a rather nasty ordering issue with spin_unlock_wait
on architectures implementing spin_lock with LL/SC sequences and acquire
semantics:

 | CPU 1                   CPU 2                     CPU 3
 | ==================      ====================      ==============
 |                                                   spin_unlock(&lock);
 |                         spin_lock(&lock):
 |                           r1 = *lock; // r1 == 0;
 |                         o = READ_ONCE(object); // reordered here
 | object = NULL;
 | smp_mb();
 | spin_unlock_wait(&lock);
 |                           *lock = 1;
 | smp_mb();
 | o->dead = true;
 |                         if (o) // true
 |                           BUG_ON(o->dead); // true!!

The crux of the problem is that spin_unlock_wait(&lock) can return on
CPU 1 whilst CPU 2 is in the process of taking the lock. This can be
resolved by upgrading spin_unlock_wait to a LOCK operation, forcing it
to serialise against a concurrent locker and giving it acquire semantics
in the process (although it is not at all clear whether this is needed -
different callers seem to assume different things about the barrier
semantics and architectures are similarly disjoint in their
implementations of the macro).

This patch implements spin_unlock_wait using an LL/SC sequence with
acquire semantics on arm64. For v8.1 systems with the LSE atomics, the
exclusive writeback is omitted, since the spin_lock operation is
indivisible and no intermediate state can be observed.

Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit d86b8da04dfa4771a68bdbad6c424d40f22f0d14)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: enable HAVE_IRQ_TIME_ACCOUNTING

arm64 relies on the arm_arch_timer for sched_clock, so we can select
HAVE_IRQ_TIME_ACCOUNTING and have the core sched-clock code enable the
feature at runtime based on the rate.

Reported-by: Mario Smarduch <m.smarduch@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 24da208db32ee1e4757ceaba898c47add8e5361e)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: fix COMPAT_SHMLBA definition for large pages

ARM glibc uses (4 * __getpagesize()) for SHMLBA, which is correct for
4KB pages and works fine for 64KB pages, but the kernel uses a hardcoded
16KB that is too small for 64KB page based kernels. This changes the
definition to what user space sees when using 64KB pages.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit b9b7aebb42d1b1392f3111de61136bb6cf3aae3f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: add __init/__initdata section marker to some functions/variables

These functions/variables are not needed after booting, so mark them
as __init or __initdata.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit a7c61a3452d39078919f0e1f493ff966fb64f0db)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: pgtable: implement pte_accessible()

This patch implements the pte_accessible() macro, which can be used to
test whether or not a given pte is a candidate for allocation in the
TLB.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 76c714be0e5e60c935a53b31be58939510ba1d0f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: allow sections for unaligned bases

Callees of __create_mapping may decide to create section mappings if
sufficient low bits of the physical and virtual addresses they were
passed are zero. While __create_mapping rounds the virtual base address
down, it does not similarly round the physical base address down, and
hence non-zero bits in the physical address can prevent use of a section
mapping, even where a whole next-level table would be used instead.

Round down the physical base address in __create_mapping to enable all
callees to always create section mappings when such a mapping is
possible.

Cc: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 9c4e08a3022b6df90d31ef4007291faabfce5431)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

arm64: mm: detect bad __create_mapping uses

If a caller of __create_mapping provides a PA and VA which have
different sub-page offsets, it is not clear which offset they expect to
apply to the mapping, and is indicative of a bad caller.

In some cases, the region we wish to map may validly have a sub-page
offset in the physical and virtual addresses. For example, EFI runtime
regions have 4K granularity, yet may be mapped by a 64K page kernel. So
long as the physical and virtual offsets are the same, the region will
be mapped at the expected VAs.

Disallow calls with differing sub-page offsets, and WARN when they are
encountered, so that we can detect and fix such cases.

Cc: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit cc5d2b3b95cdbb3fed4e38e667d17b9ac7250f7a)
Signed-off-by: Alex Shi <alex.shi@linaro.org>

Linux 4.4.9

extcon: max77843: Use correct size for reading the interrupt register

commit c4924e92442d7218bd725e47fa3988c73aae84c9 upstream.

The info->status[] array has 3 elements.  We are using size
MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as
intended.

Fixes: 135d9f7d135a ('extcon: max77843: Clear IRQ bits state before request IRQ')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch title]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Select CONFIG_SRCU

commit 042d4460b5b4379a12f375045ff9065cf6758735 upstream.

The newly added STM code uses SRCU, but does not ensure that
this code is part of the kernel:

drivers/built-in.o: In function `stm_source_link_show':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `stm_source_link_drop':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'

This adds a Kconfig 'select' statement like all the other SRCU using
drivers have.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

megaraid_sas: add missing curly braces in ioctl handler

commit 3deb9438d34a09f6796639b652a01d110aca9f75 upstream.

gcc-6 found a dubious indentation in the megasas_mgmt_fw_ioctl
function:

drivers/scsi/megaraid/megaraid_sas_base.c: In function 'megasas_mgmt_fw_ioctl':
drivers/scsi/megaraid/megaraid_sas_base.c:6658:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
    kbuff_arr[i] = NULL;
    ^~~~~~~~~
drivers/scsi/megaraid/megaraid_sas_base.c:6653:3: note: ...this 'if' clause, but it is not
   if (kbuff_arr[i])
   ^~

The code is actually correct, as there is no downside in clearing a NULL
pointer again.

This clarifies the code and avoids the warning by adding extra curly
braces.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 90dc9d98f01b ("megaraid_sas : MFI MPT linked list corruption fix")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race

commit a6ab1e8126d205238defbb55d23661a3a5c6a0d8 upstream.

sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer
set.  In this case it aborts the queuing of the upcall.
However it has already taken a new counted reference on "h" and
doesn't "put" it, even though it frees the data structure holding the reference.

So let's delay the "cache_get" until we know we need it.

Fixes: f9e1aedc6c79 ("sunrpc/cache: remove races with queuing an upcall.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: rockchip: fix a impossible condition caused by the warning

commit 43b4eb9fe719b107c8e5d49d1edbff0c135a42cb upstream.

As the Dan report the smatch check the thermal driver warning:
drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt()
warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) =>
(s32min-s32max > s32max)'

Although The shut_temp read from DT is u32,the temperature is currently
represented as int not long in the thermal driver.
Let's change to make shut_temp instead of the thermal->tshut_temp for
the condition.

Fixes: commit 437df2172e8d
("thermal: rockchip: consistently use int for temperatures")

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

unbreak allmodconfig KCONFIG_ALLCONFIG=...

commit 6b87b70c5339f30e3c5b32085e69625906513dc2 upstream.

Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used
to be equivalent to make allmodconfig; these days it hardwires MODULES to n.
In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is
treated as if it set it to n.

Regression had been introduced by commit cfa98f ("kconfig: do not
override symbols already set"); what happens is that conf_read_simple()
does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and
has conf_set_all_new_symbols() skip modules_sym.

It's pretty easy to fix - simply move that call of sym_calc_value()
into the callers, except for the ones in KCONFIG_ALLCONFIG handling.
Objections?

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: cfa98f2e0ae9 ("kconfig: do not override symbols already set")
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jme: Fix device PM wakeup API usage

commit 81422e672f8181d7ad1ee6c60c723aac649f538f upstream.

According to Documentation/power/devices.txt

The driver should not use device_set_wakeup_enable() which is the policy
for user to decide.

Using device_init_wakeup() to initialize dev->power.should_wakeup and
dev->power.can_wakeup on driver initialization.

And use device_may_wakeup() on suspend to decide if WoL function should
be enabled on NIC.

Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jme: Do not enable NIC WoL functions on S0

commit 0772a99b818079e628a1da122ac7ee023faed83e upstream.

Otherwise it might be back on resume right after going to suspend in
some hardware.

Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: imx-weim: Take the 'status' property value into account

commit 33b96d2c9579213cf3f36d7b29841b1e464750c4 upstream.

Currently we have an incorrect behaviour when multiple devices
are present under the weim node. For example:

&weim {
...
status = "okay";

sram@0,0 {
...
         status = "okay";
};

mram@0,0 {
...
         status = "disabled";
     };
};

In this case only the 'sram' device should be probed and not 'mram'.

However what happens currently is that the status variable is ignored,
causing the 'sram' device to be disabled and 'mram' to be enabled.

Change the weim_parse_dt() function to use
for_each_available_child_of_node()so that the devices marked with
'status = disabled' are not probed.

Suggested-by: Wolfgang Netbal <wolfgang.netbal@sigmatek.at>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: pxa: fix dma engine node to pxa3xx-nand

commit 07c6b2d01d351f0512ed7145625265e435ab3240 upstream.

Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
the pxa_dma requires 2 arguments, namely the requestor line and the
requested priority.

Fix the only left device node which was still passing only one argument,
making the pxa3xx-nand driver misbehave in a device-tree configuration,
ie. failing all data transfers.

Fixes: c943646d1f49 ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: armada-375: use armada-370-sata for SATA

commit b3a7f31eb7375633cd6a742f19488fc5a4208b36 upstream.

The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which
requires the PHY speed to be set in the LP_PHY_CTL register for SATA
hotplug to work.

Therefore, this commit updates the compatible string used to describe
the SATA IP in Armada 375 from marvell,orion-sata to
marvell,armada-370-sata.

Fixes: 4de59085091f753d08c8429d756b46756ab94665 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: EXYNOS: select THERMAL_OF

commit dc7eb9d589e595954792cc192bcbb92932e5c2ff upstream.

We cannot select a symbol that has disabled dependencies, so
we get a warning if we ever enable EXYNOS_THERMAL without
also turning on THERMAL_OF:

warning: (ARCH_EXYNOS) selects EXYNOS_THERMAL which has unmet direct dependencies (THERMAL && (ARCH_EXYNOS || COMPILE_TEST) && THERMAL_OF)

This adds another 'select' in the platform code to avoid that
case. Alternatively, we could decide to not select EXYNOS_THERMAL
here and instead make it a user option.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f87e6bd3f740 ("thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: prima2: always enable reset controller

commit ef2b1d777d643af227a22309d8b79898b90b123c upstream.

The atlas7 clock controller driver registers a reset controller
for itself, which causes a link error when the subsystem is
disabled:

drivers/built-in.o: In function `atlas7_clk_init':
drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register'

As the clk driver does not have a Kconfig symbol for itself
but it always built-in when the platform is enabled, we have
to ensure that the reset controller subsystem is also built-in
in this case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes: 301c5d29402e ("clk: sirf: add CSR atlas7 clk and reset support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP3: Add cpuidle parameters table for omap3430

commit 98f42221501353067251fbf11e732707dbb68ce3 upstream.

Based on CPU type choose generic omap3 or omap3430 specific cpuidle
parameters. Parameters for omap3430 were measured on Nokia N900 device and
added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters")
which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle -
remove rx51 cpuidle parameters table") due to huge code complexity.

This patch brings cpuidle parameters for omap3430 devices again, but uses
simple condition based on CPU type.

Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle
parameters table")
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix races of writeback with punch hole and zero range

commit 011278485ecc3cd2a3954b5d4c73101d919bf1fa upstream.

When doing delayed allocation, update of on-disk inode size is postponed
until IO submission time. However hole punch or zero range fallocate
calls can end up discarding the tail page cache page and thus on-disk
inode size would never be properly updated.

Make sure the on-disk inode size is updated before truncating page
cache.

Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix races between buffered IO and collapse / insert range

commit 32ebffd3bbb4162da5ff88f9a35dd32d0a28ea70 upstream.

Current code implementing FALLOC_FL_COLLAPSE_RANGE and
FALLOC_FL_INSERT_RANGE is prone to races with buffered writes and page
faults. If buffered write or write via mmap manages to squeeze between
filemap_write_and_wait_range() and truncate_pagecache() in the fallocate
implementations, the written data is simply discarded by
truncate_pagecache() although it should have been shifted.

Fix the problem by moving filemap_write_and_wait_range() call inside
i_mutex and i_mmap_sem. That way we are protected against races with
both buffered writes and page faults.

Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: move unlocked dio protection from ext4_alloc_file_blocks()

commit 17048e8a083fec7ad841d88ef0812707fbc7e39f upstream.

Currently ext4_alloc_file_blocks() was handling protection against
unlocked DIO. However we now need to sometimes call it under i_mmap_sem
and sometimes not and DIO protection ranks above it (although strictly
speaking this cannot currently create any deadlocks). Also
ext4_zero_range() was actually getting & releasing unlocked DIO
protection twice in some cases. Luckily it didn't introduce any real bug
but it was a land mine waiting to be stepped on.  So move DIO protection
out from ext4_alloc_file_blocks() into the two callsites.

Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix races between page faults and hole punching

commit ea3d7209ca01da209cda6f0dea8be9cc4b7a933b upstream.

Currently, page faults and hole punching are completely unsynchronized.
This can result in page fault faulting in a page into a range that we
are punching after truncate_pagecache_range() has been called and thus
we can end up with a page mapped to disk blocks that will be shortly
freed. Filesystem corruption will shortly follow. Note that the same
race is avoided for truncate by checking page fault offset against
i_size but there isn't similar mechanism available for punching holes.

Fix the problem by creating new rw semaphore i_mmap_sem in inode and
grab it for writing over truncate, hole punching, and other functions
removing blocks from extent tree and for read over page faults. We
cannot easily use i_data_sem for this since that ranks below transaction
start and we need something ranking above it so that it can be held over
the whole truncate / hole punching operation. Also remove various
workarounds we had in the code to reduce race window when page fault
could have created pages with stale mapping information.

Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf stat: Document --detailed option

commit f594bae08183fb6b57db55387794ece3e1edf6f6 upstream.

I'm surprised this remained undocumented since at least 2011. And it is
actually a very useful switch, as Steve and I came to realize recently.

Add the text from

  2cba3ffb9a9d ("perf stat: Add -d -d and -d -d -d options to show more CPU events")

which added the incrementing aspect to -d.

Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2cba3ffb9a9d ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
Link: http://lkml.kernel.org/r/1457347294-32546-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: handle spaces in file names obtained from /proc/pid/maps

commit 89fee59b504f86925894fcc9ba79d5c933842f93 upstream.

Steam frequently puts game binaries in folders with spaces.

Note: "(deleted)" markers are now treated as part of the file name.

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 6064803313ba ("perf tools: Use sscanf for parsing /proc/pid/maps")
Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf hists browser: Only offer symbol scripting when a symbol is under the cursor

commit c221acb0f970d3b80d72c812cda19c121acf5d52 upstream.

When this feature was introduced a check was made if there was a
resolved symbol under the cursor, it got lost in commit ea7cd5923309
("perf hists browser: Split popup menu actions - part 2"), reinstate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ea7cd5923309 ("perf hists browser: Split popup menu actions - part 2")
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a  larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: Drop mtd.owner requirement in nand_scan

commit 20c07a5bf094198ff2382aa5e7c930b3c9807792 upstream.

Since commit 807f16d4db95 ("mtd: core: set some defaults
when dev.parent is set"), it's now legal for drivers
to call nand_scan and nand_scan_ident without setting
mtd.owner.

Drop the check and while at it remove the BUG() abuse.

Fixes: 807f16d4db95 ("mtd: core: set some defaults when dev.parent is set")
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Brian: editorial note - while commit 807f16d4db95 wasn't explicitly
    broken, some follow-up commits in the v4.4 release broke a few
    drivers, since they would hit this BUG() if they used nand_scan()
    and were built as modules]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: brcmnand: Fix v7.1 register offsets

commit d267aefc54a28efc5bda7f009598dc83b5f98734 upstream.

The BRCMNAND controller revision 7.1 is almost 100% compatible with the
previous v6.0 register offset layout, except for the Correctable Error
Reporting Threshold registers. Fix this by adding another table with the
correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: remove micron_quad_enable()

commit 3b5394a3ccffbfa1d1d448d48742853a862822c4 upstream.

This patch remove the micron_quad_enable() function which force the Quad
SPI mode. However, once this mode is enabled, the Micron memory expect ALL
commands to use the SPI 4-4-4 protocol. Hence a failure does occur when
calling spi_nor_wait_till_ready() right after the update of the Enhanced
Volatile Configuration Register (EVCR) in the micron_quad_enable() as
the SPI controller driver is not aware about the protocol change.

Since there is almost no performance increase using Fast Read 4-4-4
commands instead of Fast Read 1-1-4 commands, we rather keep on using the
Extended SPI mode than enabling the Quad SPI mode.

Let's take the example of the pretty standard use of 8 dummy cycles during
Fast Read operations on 64KB erase sectors:

Fast Read 1-1-4 requires 8 cycles for the command, then 24 cycles for the
3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles
for the read data; so 131112 clock cycles.

On the other hand the Fast Read 4-4-4 would require 2 cycles for the
command, then 6 cycles for the 3byte address followed by 8 dummy clock
cycles and finally 65536*2 cycles for the read data. So 131088 clock
cycles. The theorical bandwidth increase is 0.0%.

Now using Fast Read operations on 512byte pages:
Fast Read 1-1-4 needs 8+24+8+(512*2) = 1064 clock cycles whereas Fast
Read 4-4-4 would requires 2+6+8+(512*2) = 1040 clock cycles. Hence the
theorical bandwidth increase is 2.3%.
Consecutive reads for non sequential pages is not a relevant use case so
The Quad SPI mode is not worth it.

mtd_speedtest seems to confirm these figures.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Fixes: 548cd3ab54da ("mtd: spi-nor: Add quad I/O support for Micron SPI NOR")
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock

commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream.

The BSP team noticed that there is spin/mutex lock issue on sh-sci when
CPUFREQ is used.  The issue is that the notifier function may call
mutex_lock() while the spinlock is held, which can lead to a BUG().
This may happen if CPUFREQ is changed while another CPU calls
clk_get_rate().

Taking the spinlock was added to the notifier function in commit
e552de2413edad1a ("sh-sci: add platform device private data"), to
protect the list of serial ports against modification during traversal.
At that time the Common Clock Framework didn't exist yet, and
clk_get_rate() just returned clk->rate without taking a mutex.
Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a
device per port mapping."), there's no longer a list of serial ports to
traverse, and taking the spinlock became superfluous.

To fix the issue, just remove the cpufreq notifier:
  1. The notifier doesn't work correctly: all it does is update stored
     clock rates; it does not update the divider in the hardware.
     The divider will only be updated when calling sci_set_termios().
     I believe this was broken back in 2004, when the old
     drivers/char/sh-sci.c driver (where the notifier did update the
     divider) was replaced by drivers/serial/sh-sci.c (where the
     notifier just updated port->uartclk).
     Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port
     sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH]
     Remove old sh-sci driver").
  2. On modern SoCs, the sh-sci parent clock rate is no longer related
     to the CPU clock rate anyway, so using a cpufreq notifier is
     futile.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()

commit 5e1021f2b6dff1a86a468a1424d59faae2bc63c1 upstream.

ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on
error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is
ignored in the following "if" condition and ext4_expand_extra_isize()
might be called with NULL iloc.bh set, which triggers NULL pointer
dereference.

This is uncovered by commit 8b4953e13f4c ("ext4: reserve code points for
the project quota feature"), which enlarges the ext4_inode size, and
run the following script on new kernel but with old mke2fs:

  #/bin/bash
  mnt=/mnt/ext4
  devname=ext4-error
  dev=/dev/mapper/$devname
  fsimg=/home/fs.img

  trap cleanup 0 1 2 3 9 15

  cleanup()
  {
          umount $mnt >/dev/null 2>&1
          dmsetup remove $devname
          losetup -d $backend_dev
          rm -f $fsimg
          exit 0
  }

  rm -f $fsimg
  fallocate -l 1g $fsimg
  backend_dev=`losetup -f --show $fsimg`
  devsize=`blockdev --getsz $backend_dev`

  good_tab="0 $devsize linear $backend_dev 0"
  error_tab="0 $devsize error $backend_dev 0"

  dmsetup create $devname --table "$good_tab"

  mkfs -t ext4 $dev
  mount -t ext4 -o errors=continue,strictatime $dev $mnt

  dmsetup load $devname --table "$error_tab" && dmsetup resume $devname
  echo 3 > /proc/sys/vm/drop_caches
  ls -l $mnt
  exit 0

[ Patch changed to simplify the function a tiny bit. -- Ted ]

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/kmmio: Fix mmiotrace for hugepages

commit cfa52c0cfa4d727aa3e457bf29aeff296c528a08 upstream.

Because Linux might use bigger pages than the 4K pages to handle those mmio
ioremaps, the kmmio code shouldn't rely on the pade id as it currently does.

Using the memory address instead of the page id lets us look up how big the
page is and what its base address is, so that we won't get a page fault
within the same page twice anymore.

Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Cc: linux-x86_64@vger.kernel.org
Cc: nouveau@lists.freedesktop.org
Cc: pq@iki.fi
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1456966991-6861-1-git-send-email-nouveau@karolherbst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf evlist: Reference count the cpu and thread maps at set_maps()

commit a55e5663761366fb883f6f25375dd68bc958b9db upstream.

We were dropping the reference we possibly held but not obtaining one
for the new maps, which we will drop at perf_evlist__delete(), fix it.

This was caught by Steven Noonan in some of the machines which would
produce this output when caught by glibc debug mechanisms:

  $ sudo perf test 21
  21: Test object code reading                                 :***
  Error in `perf': corrupted double-linked list: 0x00000000023ffcd0 ***
  ======= Backtrace: =========
  /usr/lib/libc.so.6(+0x72055)[0x7f25be0f3055]
  /usr/lib/libc.so.6(+0x779b6)[0x7f25be0f89b6]
  /usr/lib/libc.so.6(+0x7a0ed)[0x7f25be0fb0ed]
  /usr/lib/libc.so.6(__libc_calloc+0xba)[0x7f25be0fceda]
  perf(parse_events_lex_init_extra+0x38)[0x4cfff8]
  perf(parse_events+0x55)[0x4a0615]
  perf(perf_evlist__config+0xcf)[0x4eeb2f]
  perf[0x479f82]
  perf(test__code_reading+0x1e)[0x47ad4e]
  perf(cmd_test+0x5dd)[0x46452d]
  perf[0x47f4e3]
  perf(main+0x603)[0x42c723]
  /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f25be0a1610]
  perf(_start+0x29)[0x42c859]

Further investigation using valgrind led to the reference count imbalance fixed
in this patch.

Reported-and-Tested-by: Steven Noonan <steven@uplinklabs.net>
Link: http://lkml.kernel.org/r/CAKbGBLjC2Dx5vshxyGmQkcD+VwiAQLbHoXA9i7kvRB2-2opHZQ@mail.gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f30a79b012e5 ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/n/tip-j0u1bdhr47sa511sgg76kb8h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors

commit f3df53e4d70b5736368a8fe8aa1bb70c1cb1f577 upstream.

Fix RDAC read back errors caused by a typo. Value must shift by 2.

Fixes: a4bd394956f2 ("drivers/misc/ad525x_dpot.c: new features")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: max77686: Properly handle regmap_irq_get_virq() error code

commit fb166ba1d7f0a662f7332f4ff660a0d6f4d76915 upstream.

The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions
but driver checked only for value of 0.

This could lead to a cast of -EINVAL to an unsigned int used as a
interrupt number for devm_request_threaded_irq(). Although this is not
yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but
might be a misleading when diagnosing errors.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq")
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: rx8025: remove rv8803 id

commit aaa3cee5deffa28415a6e1852c5afae0f5d210e2 upstream.

The rv8803 has its own driver that should be used. Remove its id from
the rx8025 driver.

Fixes: b1f9d790b59dc04f8813a49a92ddd8651770ffee
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: ds1685: passing bogus values to irq_restore

commit 8c09b9fdecab1f4a289f07b46e2ad174b6641928 upstream.

We call spin_lock_irqrestore with "flags" set to zero instead of to the
value from spin_lock_irqsave().

Fixes: aaaf5fbf56f1 ('rtc: add driver for DS1685 family of real time clocks')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: vr41xx: Wire up alarm_irq_enable

commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream.

drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used

Apparently the conversion to alarm_irq_enable forgot to wire up the
callback.

Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: hym8563: fix invalid year calculation

commit d5861262210067fc01b2fb4f7af2fd85a3453f15 upstream.

Year field must be in BCD format, according to
hym8563 datasheet.

Due to the bug year 2016 became 2010.

Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / Domains: Fix removal of a subdomain

commit beda5fc1ff9b527059290a97b672d2ee0eb7b92f upstream.

Commit 30e7a65b3fdb (PM / Domains: Ensure subdomain is not in use
before removing) added a test to ensure that a subdomain is not a
master to another subdomain or if any devices are using the subdomain
before removing. This change incorrectly used the "slave_links" list to
determine if the subdomain is a master to another subdomain, where it
should have been using the "master_links" list instead. The
"slave_links" list will never be empty for a subdomain and so a
subdomain can never be removed. Fix this by testing if the
"master_links" list is empty instead.

Fixes: 30e7a65b3fdb (PM / Domains: Ensure subdomain is not in use before removing)
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / OPP: Initialize u_volt_min/max to a valid value

commit c88c395f4a6485f23f81e385c79945d68bcd5c5d upstream.

We kept u_volt_min/max initialized to 0, when only the target voltage is
present in DT, instead of the target/min/max triplet.

This didn't go well with the regulator framework, as on few calls the
min voltage was set to target and max was set to 0 and so resulted in a
kernel crash like below:

kernel BUG at ../drivers/regulator/core.c:216!

[<c0684af4>] (regulator_check_voltage) from [<c06857ac>] (regulator_set_voltage_unlocked+0x58/0x230)
[<c06857ac>] (regulator_set_voltage_unlocked) from [<c06859ac>] (regulator_set_voltage+0x28/0x54)
[<c06859ac>] (regulator_set_voltage) from [<c0775b28>] (_set_opp_voltage+0x30/0x98)
[<c0775b28>] (_set_opp_voltage) from [<c0776630>] (dev_pm_opp_set_rate+0xf0/0x28c)
[<c0776630>] (dev_pm_opp_set_rate) from [<c096f784>] (__cpufreq_driver_target+0x184/0x2b4)
[<c096f784>] (__cpufreq_driver_target) from [<c0973760>] (dbs_check_cpu+0x1b0/0x1f4)
[<c0973760>] (dbs_check_cpu) from [<c0973f30>] (cpufreq_governor_dbs+0x324/0x5c4)
[<c0973f30>] (cpufreq_governor_dbs) from [<c0970958>] (__cpufreq_governor+0xe4/0x1ec)
[<c0970958>] (__cpufreq_governor) from [<c09711e0>] (cpufreq_init_policy+0x64/0x8c)
[<c09711e0>] (cpufreq_init_policy) from [<c09718cc>] (cpufreq_online+0x2fc/0x708)
[<c09718cc>] (cpufreq_online) from [<c0765ff0>] (subsys_interface_register+0x94/0xd8)
[<c0765ff0>] (subsys_interface_register) from [<c0970530>] (cpufreq_register_driver+0x14c/0x19c)
[<c0970530>] (cpufreq_register_driver) from [<c09746dc>] (dt_cpufreq_probe+0x70/0xec)
[<c09746dc>] (dt_cpufreq_probe) from [<c076907c>] (platform_drv_probe+0x4c/0xb0)
[<c076907c>] (platform_drv_probe) from [<c07678e0>] (driver_probe_device+0x214/0x2c0)
[<c07678e0>] (driver_probe_device) from [<c0767a18>] (__driver_attach+0x8c/0x90)
[<c0767a18>] (__driver_attach) from [<c0765c2c>] (bus_for_each_dev+0x68/0x9c)
[<c0765c2c>] (bus_for_each_dev) from [<c0766d78>] (bus_add_driver+0x1a0/0x218)
[<c0766d78>] (bus_add_driver) from [<c076810c>] (driver_register+0x78/0xf8)
[<c076810c>] (driver_register) from [<c0301d74>] (do_one_initcall+0x90/0x1d8)
[<c0301d74>] (do_one_initcall) from [<c1100e14>] (kernel_init_freeable+0x15c/0x1fc)
[<c1100e14>] (kernel_init_freeable) from [<c0b27a0c>] (kernel_init+0x8/0xf0)
[<c0b27a0c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c)
Code: e1550004 baffffeb e3a00000 e8bd8070 (e7f001f2)

Fix that by initializing u_volt_min/max to the target voltage in such cases.

Reported-and-tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic/scif: fix wrap around tests

commit 7b64dbf849abdd7e769820e25120758f956a7f13 upstream.

Signed integer overflow is undefined.  Also I added a check for
"(offset < 0)" in scif_unregister() because that makes it match the
other conditions and because I didn't want to subtract a negative.

Fixes: ba612aa8b487 ('misc: mic: SCIF memory registration and unregistration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc/bmp085: Enable building as a module

commit 50e6315dba721cbc24ccd6d7b299f1782f210a98 upstream.

Commit 985087dbcb02 'misc: add support for bmp18x chips to the bmp085
driver' changed the BMP085 config symbol to a boolean.  I see no
reason why the shared code cannot be built as a module, so change it
back to tristate.

Fixes: 985087dbcb02 ("misc: add support for bmp18x chips to the bmp085 driver")
Cc: Eric Andersson <eric.andersson@unixphere.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/mpi: Endianness fix

commit 3ee0cb5fb5eea2110db1b5cb7f67029b7be8a376 upstream.

The limbs are integers in the host endianness, so we can't simply
iterate over the individual bytes. The current code happens to work on
little-endian, because the order of the limbs in the MPI array is the
same as the order of the bytes in each limb, but it breaks on
big-endian.

Fixes: 0f74fbf77d45 ("MPI: Fix mpi_read_buffer")
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: da8xx-fb: fix videomodes of lcd panels

commit 713fced8d10fa1c759c8fb6bf9aaa681bae68cad upstream.

Commit 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the
hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but
forgot to update known_lcd_panels[] which had sync values
according to old logic. This breaks LCD at least on DA850 EVM.

This patch fixes this issue and I have tested this for panel
"Sharp_LK043T1DG01" using DA850 EVM board.

Fixes: 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse")
Signed-off-by: Sushaanth Srirangapathi <sushaanth.s@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>