firefly-linux-kernel-4.4.55.git
12 years agoALSA: cmi8328: Fix build error with CONFIG_GAMEPORT=n
Takashi Iwai [Fri, 24 Aug 2012 05:52:03 +0000 (07:52 +0200)]
ALSA: cmi8328: Fix build error with CONFIG_GAMEPORT=n

  sound/isa/cmi8328.c: In function 'snd_cmi8328_remove':
  sound/isa/cmi8328.c:416:24: error: 'cmi' undeclared (first use in this function)
  sound/isa/cmi8328.c:416:24: note: each undeclared identifier is reported only once for each function it appears in
  make[3]: *** [sound/isa/cmi8328.o] Error 1

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - bug fix on references without checking CONFIG_SND_HDA_POWER_SAVE
Mengdong Lin [Fri, 24 Aug 2012 04:06:30 +0000 (12:06 +0800)]
ALSA: hda - bug fix on references without checking CONFIG_SND_HDA_POWER_SAVE

The patch to support runtime PM introduced a bug:
Module parameter 'power_save_controller', and the codec flag 'd3_stop_clk'
'd3_stop_clk_ok' are defined only when HDA power save is enabled in config. But
there are references to them without checking macro CONFIG_SND_HDA_POWER_SAVE.

This patch is to fix the bug.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - add runtime PM support
Mengdong Lin [Thu, 23 Aug 2012 09:32:30 +0000 (17:32 +0800)]
ALSA: hda - add runtime PM support

Runtime PM can bring more power saving:
- When the controller is suspended, its parent device will also have a chance
  to suspend.
- PCI subsystem can choose the lowest power state the controller can signal
  wake up from. This state can be D3cold on platforms with ACPI PM support.
And runtime PM can provide a gerneral sysfs interface for a system policy
manager.

Runtime PM support is based on current HDA power saving implementation. The user
can enable runtime PM on platfroms that provide acceptable latency on transition
from D3 to D0.

Details:
- When both power saving and runtime PM are enabled:
  -- If a codec supports 'stop-clock' in D3, it will request suspending the
     controller after it enters D3 and request resuming the controller before
     back to D0. Thus the controller will be suspended only when all codecs are
     suspended and support stop-clock in D3.
  -- User IO operations and HW wakeup signal can resume the controller back to
     D0.
- If runtime PM is disabled, power saving just works as before.
- If power saving is disabled, the controller won't be suspended because the
  power usage counter can never be 0.

More about 'stop-clock' feature:
If a codec can support targeted pass-through operations in D3 state when there
is no BCLK present on the link, it will set CLKSTOP flag in the supported power
states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec
section 7.3.3.10 Power state and 7.3.4.12 Supported Power State.

[Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai]

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Call snd_hda_jack_report_sync() generically in hda_codec.c
Takashi Iwai [Wed, 22 Aug 2012 14:40:24 +0000 (16:40 +0200)]
ALSA: hda - Call snd_hda_jack_report_sync() generically in hda_codec.c

Instead of calling the jack sync in the init callback of each codec,
call it generically at initialization and resume.  By calling it at
the last of resume sequence, a possible race between the jack sync and
the unsol event enablement in the current code will be closed, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: introduce snd-cmi8328: C-Media CMI8328 driver
Ondrej Zary [Mon, 20 Aug 2012 20:39:51 +0000 (22:39 +0200)]
ALSA: introduce snd-cmi8328: C-Media CMI8328 driver

Introduce snd-cmi8328 driver for C-Media CMI8328-based sound cards, such as
AudioExcel AV500.

It supports PCM playback and capture (full-duplex) through wss_lib, gameport,
OPL3 and MPU401. The AV500 card has onboard Dream wavetable synth connected
to the MPU401 port and Aux 1 input internally which works too.
The CDROM interface is not supported (as the drivers for these CDROMs were
removed from the kernel some time ago).

A separate driver is needed because CMI8328 is completely different chip to
CMI8329/CMI8330. It's configured by magic registers (there's no PnP). Sound is
provided by a real WSS codec (CS4231A) and the SB part is just a SB Pro
emulation (for DOS games, useless for Linux).

When SB is enabled, the CMI8328 chip disables access to the WSS codec,
emulates SoundBlaster on one side and outputs sound data to the codec - so SB
and WSS can't work together with this card. The WSS codec can do full duplex
by itself so there's no need for crazy things like snd-cmi8330 does
(combining SB and WSS parts into one driver).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'for-linus' into for-next
Takashi Iwai [Mon, 20 Aug 2012 20:14:26 +0000 (22:14 +0200)]
Merge branch 'for-linus' into for-next

Conflicts:
sound/pci/hda/hda_codec.c

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix leftover codec->power_transition
Takashi Iwai [Mon, 20 Aug 2012 19:25:22 +0000 (21:25 +0200)]
ALSA: hda - Fix leftover codec->power_transition

When the codec turn-on operation is canceled by the immediate
power-on, the driver left the power_transition flag as is.
This caused the persistent avoidance of power-save behavior.

Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Mon, 20 Aug 2012 19:26:04 +0000 (21:26 +0200)]
Merge tag 'asoc-3.6' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Additional updates for 3.6

A batch more bugfixes, all driver-specific and fairly small and
unremarkable in a global context.  The biggest batch are for the newly
added Arizona drivers.

12 years agoALSA: hda - Add missing ifdef CONFIG_SND_HDA_POWER_SAVE to tracepoints
Takashi Iwai [Mon, 20 Aug 2012 16:04:40 +0000 (18:04 +0200)]
ALSA: hda - Add missing ifdef CONFIG_SND_HDA_POWER_SAVE to tracepoints

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: lto, sound: Fix export symbols for !CONFIG_MODULES
Andi Kleen [Sun, 19 Aug 2012 02:56:22 +0000 (19:56 -0700)]
ALSA: lto, sound: Fix export symbols for !CONFIG_MODULES

The new LTO EXPORT_SYMBOL references symbols even without CONFIG_MODULES.
Since these functions are macros in this case this doesn't work.
Add a ifdef to fix the build.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Check the power state when power_save option is changed
Takashi Iwai [Tue, 14 Aug 2012 15:13:32 +0000 (17:13 +0200)]
ALSA: hda - Check the power state when power_save option is changed

... by calling the newly introduced snd_hda_power_sync().

I had to reimplement a wheel for adding the trigger at changing the
parameter -- the parameter set ops is overwritten to pass the integer
parameter, then trigger the power-state sync.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Implement snd_hda_power_sync() helper function
Takashi Iwai [Tue, 14 Aug 2012 15:12:47 +0000 (17:12 +0200)]
ALSA: hda - Implement snd_hda_power_sync() helper function

Added a new helper function snd_hda_power_sync() to trigger the
power-saving manually.  It's an inline function call to
snd_hda_power_save() helper function.

Together with this addition, snd_hda_power_up*() and
snd_hda_power_down() functions are inlined to a call of the same
snd_hda_power_save() helper function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'topic/ca0132-fix' into for-linus
Takashi Iwai [Mon, 20 Aug 2012 09:38:31 +0000 (11:38 +0200)]
Merge branch 'topic/ca0132-fix' into for-linus

This is a series of fixes for CA0132, especially the missing SPDIF I/O
and the mixer build errors.

12 years agoALSA: hda - don't create dysfunctional mixer controls for ca0132
David Henningsson [Mon, 20 Aug 2012 09:17:00 +0000 (11:17 +0200)]
ALSA: hda - don't create dysfunctional mixer controls for ca0132

It's possible that these amps are settable somehow, e g through
secret codec verbs, but for now, don't create the controls (as
they won't be working anyway, and cause errors in amixer).

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1038651
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add tracepoints at snd_hda_power_up/down entrances.
Takashi Iwai [Mon, 20 Aug 2012 08:22:25 +0000 (10:22 +0200)]
ALSA: hda - Add tracepoints at snd_hda_power_up/down entrances.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: snd-ad1816a: Implement suspend/resume
Ondrej Zary [Sun, 19 Aug 2012 21:27:26 +0000 (23:27 +0200)]
ALSA: snd-ad1816a: Implement suspend/resume

Implement suspend/resume support for AD1816 chips.
Tested with Terratec SoundSystem Base-1.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: snd-ad1816a: remove useless struct snd_card_ad1816a
Ondrej Zary [Sun, 19 Aug 2012 21:27:19 +0000 (23:27 +0200)]
ALSA: snd-ad1816a: remove useless struct snd_card_ad1816a

struct snd_card_ad1816a is only set but the values are never used then.
Removing it allows struct snd_card's private_data to be used for
struct snd_ad1816a, simplifying the code.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: sound/ppc/snd_ps3.c: fix error return code
Julia Lawall [Sun, 19 Aug 2012 07:02:59 +0000 (09:02 +0200)]
ALSA: sound/ppc/snd_ps3.c: fix error return code

Initialize ret before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: sound/pci/rme9652/hdspm.c: fix error return code
Julia Lawall [Sun, 19 Aug 2012 07:02:54 +0000 (09:02 +0200)]
ALSA: sound/pci/rme9652/hdspm.c: fix error return code

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: sound/pci/sis7019.c: fix error return code
Julia Lawall [Sun, 19 Aug 2012 07:02:55 +0000 (09:02 +0200)]
ALSA: sound/pci/sis7019.c: fix error return code

Initialize rc before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: sound/pci/ctxfi/ctatc.c: fix error return code
Julia Lawall [Sun, 19 Aug 2012 07:02:56 +0000 (09:02 +0200)]
ALSA: sound/pci/ctxfi/ctatc.c: fix error return code

Initialize err before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: sound/atmel/ac97c.c: fix error return code
Julia Lawall [Sun, 19 Aug 2012 07:02:57 +0000 (09:02 +0200)]
ALSA: sound/atmel/ac97c.c: fix error return code

In the first case, the second test of whether retval is negative is
redundant.  It is dropped and the previous and subsequent tests are
combined.

In the second case, add an initialization of retval on failure of ioremap.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: sound/atmel/abdac.c: fix error return code
Julia Lawall [Sun, 19 Aug 2012 07:02:58 +0000 (09:02 +0200)]
ALSA: sound/atmel/abdac.c: fix error return code

Initialize retval before returning from a failed call to ioremap.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: fix pcm.h kernel-doc warning and notation
Randy Dunlap [Sun, 19 Aug 2012 00:43:05 +0000 (17:43 -0700)]
ALSA: fix pcm.h kernel-doc warning and notation

Fix kernel-doc warning in <sound/pcm.h> and add function name to make
the kernel-doc notation complete.

Warning(include/sound/pcm.h:1081): No description found for parameter 'substream'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agosound: oss/sb_audio: prevent divide by zero bug
Dan Carpenter [Sat, 18 Aug 2012 15:55:15 +0000 (18:55 +0300)]
sound: oss/sb_audio: prevent divide by zero bug

Speed comes from get_user() in audio_ioctl().  We use it to set the "s"
variable before clamping it to valid values so it could lead to a divide
by zero bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: wm9712: Fix inverted capture volume
Mark Brown [Tue, 31 Jul 2012 17:37:28 +0000 (18:37 +0100)]
ASoC: wm9712: Fix inverted capture volume

The capture volume increases with the register value so it shouldn't be
flagged as inverted.

Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm9712: Fix microphone source selection
Mark Brown [Thu, 16 Aug 2012 21:36:04 +0000 (22:36 +0100)]
ASoC: wm9712: Fix microphone source selection

Currently the microphone input source is not selectable as while there is
a DAPM widget it's not connected to anything so it won't be properly
instantiated. Add something more correct for the input structure to get
things going, even though it's not hooked into the rest of the routing
map and so won't actually achieve anything except allowing the relevant
register bits to be written.

Reported-by: Christop Fritz <chf.fritz@googlemail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agoASoC: wm5102: Remove DRC2
Mark Brown [Thu, 16 Aug 2012 12:08:23 +0000 (13:08 +0100)]
ASoC: wm5102: Remove DRC2

It will be removed from future device revisions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxx
David Henningsson [Thu, 16 Aug 2012 12:11:09 +0000 (14:11 +0200)]
ALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxx

Instead of blindly initializing a volume knob widget, first check
that there actually is a volume knob widget.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream
Takashi Iwai [Wed, 15 Aug 2012 10:32:00 +0000 (12:32 +0200)]
ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream

A PCM capture stream on usb-audio causes a scheduling-while-atomic
BUG, as reported in the bugzilla entry below.  It's because
snd_usb_endpoint_start() is called at first at trigger START for a
capture stream, and this function contains the left-over EP
deactivation codes.  The problem doesn't happen for a playback stream
because the function is called at PCM prepare time, which can sleep.

This patch fixes the BUG by moving the EP deactivation code into the
PCM prepare callback.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46011
Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add 3stack-automute model to AD1882 codec
Takashi Iwai [Mon, 13 Aug 2012 09:09:35 +0000 (11:09 +0200)]
ALSA: hda - Add 3stack-automute model to AD1882 codec

Added a simple support of automute for the front HP jack to AD1882
stack model.  Such an addition is basically an exception -- we really
want to avoid the static quirk codes, but AD1882 parser isn't still
ready for moving to the BIOS auto-parser yet.  So, as a quick fix, I
merged it for now.

In near future, we really need the big clean up of patch_analog.c to
move on to the auto-parser...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEP
Takashi Iwai [Tue, 14 Aug 2012 16:12:04 +0000 (18:12 +0200)]
ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEP

Otherwise we may get compile warnings due to unused functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix possible compile warnings regarding CONFIG_PM
Takashi Iwai [Tue, 14 Aug 2012 16:10:09 +0000 (18:10 +0200)]
ALSA: hda - Fix possible compile warnings regarding CONFIG_PM

Replace with a proper ifdef check of CONFIG_PM_SLEEP in hda_intel.c.
But other places in HD-audio driver are still marked with CONFIG_PM,
since these can be called for power-saving even without
CONFIG_PM_SLEEP.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: lx6464es: Add a missing error check
Takashi Iwai [Tue, 14 Aug 2012 15:42:11 +0000 (17:42 +0200)]
ALSA: lx6464es: Add a missing error check

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44541

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switch
David Henningsson [Mon, 13 Aug 2012 15:10:46 +0000 (17:10 +0200)]
ALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switch

Some Conexant devices (e g CX20590) have no mute capability on
their Beep widgets.
This patch makes sure we don't try setting mutes on those widgets.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: jack: Always notify full jack status
Mark Brown [Mon, 13 Aug 2012 15:28:36 +0000 (16:28 +0100)]
ASoC: jack: Always notify full jack status

Don't just notify for the bits we've updated, notify the full state of the
jack otherwise users might get confused by misleading reports.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm5110: Add missing input PGA routes
Mark Brown [Fri, 10 Aug 2012 14:40:22 +0000 (15:40 +0100)]
ASoC: wm5110: Add missing input PGA routes

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm5102: Add missing input PGA routes
Mark Brown [Fri, 10 Aug 2012 14:40:12 +0000 (15:40 +0100)]
ASoC: wm5102: Add missing input PGA routes

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda - fix Copyright debug message
Wang Xingchao [Mon, 13 Aug 2012 06:11:10 +0000 (14:11 +0800)]
ALSA: hda - fix Copyright debug message

As spec said, 1 indicates no copyright is asserted.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - show ICT/KAE control bits
Wang Xingchao [Mon, 13 Aug 2012 07:43:49 +0000 (15:43 +0800)]
ALSA: hda - show ICT/KAE control bits

Enable two debug options for S/PDIF Converter Control.
KAE: Keep Alive Enable; ICT: IEC Coding Type.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: Samsung: Fix build error
Sachin Kamat [Wed, 8 Aug 2012 06:04:43 +0000 (11:34 +0530)]
ASoC: Samsung: Fix build error

Fixes the following build error:
In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0,
from arch/arm/plat-samsung/include/plat/dma-ops.h:17,
from arch/arm/plat-samsung/include/plat/dma.h:128,
from sound/soc/samsung/pcm.c:23:
arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8:
error: redefinition of ‘struct s3c2410_dma_client’
arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here
make[3]: *** [sound/soc/samsung/pcm.o] Error 1

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA : hda - bug fix on checking the supported power states of a codec
Mengdong Lin [Fri, 10 Aug 2012 12:11:58 +0000 (14:11 +0200)]
ALSA : hda - bug fix on checking the supported power states of a codec

The return value of snd_hda_param_read() is -1 for an error, otherwise
it's the supported power states of a codec.

The supported power states is a 32-bit value. Bit 31 will be set to 1
if the codec supports EPSS, thus making "sup" negative. And the bit
28:5 is reserved as "0".
So a negative value other than -1 shall be further checked.

Please refer to High-Definition spec 7.3.4.12 "Supported Power
States", thanks!

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix panned "Beep Playback Switch"
David Henningsson [Fri, 10 Aug 2012 11:29:32 +0000 (13:29 +0200)]
ALSA: hda - Fix panned "Beep Playback Switch"

When "Beep Playback Switch" had a different value on left and right
channels (such as muting left but not right, or vice versa), this
could result in the right channel being ignored.

This patch enables beep to be sounding from right channel only, and
also give correct result back to userspace (e g amixer).

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: cs46xx - signedness bug in snd_cs46xx_codec_read()
Dan Carpenter [Fri, 10 Aug 2012 09:22:58 +0000 (12:22 +0300)]
ALSA: cs46xx - signedness bug in snd_cs46xx_codec_read()

This function returns its own error codes instead of normal negative
error codes.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMAINTAINERS: Add entries for Wolfson Arizona class devices
Mark Brown [Sat, 23 Jun 2012 10:25:43 +0000 (11:25 +0100)]
MAINTAINERS: Add entries for Wolfson Arizona class devices

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: core: Upgrade the severity of probe deferral errors to dev_err()
Mark Brown [Thu, 9 Aug 2012 17:44:37 +0000 (18:44 +0100)]
ASoC: core: Upgrade the severity of probe deferral errors to dev_err()

In the past when ASoC had a custom probe deferral mechanism people
complained about the logspam it generated and didn't want to know about
the fact that we were doing probe deferral so all the error messages for
it were at dev_dbg(), making diagnostics hard. Now that we have probe
deferral as an accepted thing and it's generating log messages anyway
there's no need to worry about this so upgrade the severity of all the
probe deferral sources to dev_err() so that they are displayed by default.

Also add one for missing aux_devs since there wasn't one.

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda_intel: Add Device IDs for Intel Lynx Point-LP PCH
James Ralston [Thu, 9 Aug 2012 16:38:59 +0000 (09:38 -0700)]
ALSA: hda_intel: Add Device IDs for Intel Lynx Point-LP PCH

This patch adds the Intel HD Audio Device IDs for the Intel Lynx Point-LP PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'topic/hda-probe-defer' into for-next
Takashi Iwai [Thu, 9 Aug 2012 15:41:44 +0000 (17:41 +0200)]
Merge branch 'topic/hda-probe-defer' into for-next

Fix a build error when CONFIG_SND_HDA_PATCH_LOADER isn't set.

12 years agoALSA: hda - Fix forgotten ifdef CONFIG_SND_HDA_PATCH_LOADER
Takashi Iwai [Thu, 9 Aug 2012 15:40:46 +0000 (17:40 +0200)]
ALSA: hda - Fix forgotten ifdef CONFIG_SND_HDA_PATCH_LOADER

The firmware callback must be protected by that ifdef.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge branch 'topic/hda-probe-defer' into for-next
Takashi Iwai [Thu, 9 Aug 2012 14:30:13 +0000 (16:30 +0200)]
Merge branch 'topic/hda-probe-defer' into for-next

This branch fixes the stall during probing the HD-audio driver when
the specified "patch" firmware doesn't exist.  It's basically a long-
standing issue, but mostly harmless until the recent rework of
firmware loader base code.

12 years agoALSA: hda - Deferred probing with request_firmware_nowait()
Takashi Iwai [Thu, 9 Aug 2012 11:49:23 +0000 (13:49 +0200)]
ALSA: hda - Deferred probing with request_firmware_nowait()

For processing the firmware handling properly for built-in kernels,
implement an asynchronous firmware loading with
request_firmware_nowait().  This means that the codec probing is
deferred when the patch option is specified.

Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Load firmware in hda_intel.c
Takashi Iwai [Thu, 9 Aug 2012 10:33:28 +0000 (12:33 +0200)]
ALSA: hda - Load firmware in hda_intel.c

This is a preliminary work for the deferred probing for
request_firmware() errors at init.

This patch moves the call of request_firmware() to hda_intel.c, and
call it in the earlier stage of probing rather than
azx_probe_continue().

Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: platform: Check CONFIG_PM_SLEEP instead of CONFIG_PM
Takashi Iwai [Thu, 9 Aug 2012 13:47:15 +0000 (15:47 +0200)]
ALSA: platform: Check CONFIG_PM_SLEEP instead of CONFIG_PM

When CONFIG_PM is set but CONFIG_PM_SLEEP is unset,
SIMPLE_DEV_PM_OPS() ignores the given functions, and this leads to
compile warnings.

For avoiding this, simply check CONFIG_PM_SLEEP instead of CONFIG_PM.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: wm8994: Add missing dapm routes for WM8958 rev A
Chris Rattray [Thu, 9 Aug 2012 09:10:54 +0000 (10:10 +0100)]
ASoC: wm8994: Add missing dapm routes for WM8958 rev A

Signed-off-by: Chris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: wm8962: Don't duplicate bias level management in resume
Mark Brown [Mon, 30 Jul 2012 17:23:35 +0000 (18:23 +0100)]
ASoC: wm8962: Don't duplicate bias level management in resume

The core will bring the bias level up for us since we use idle_bias_off,
duplicating this may be harmful.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: bfin: fix memory leak in sport3 controller driver
Scott Jiang [Thu, 9 Aug 2012 22:08:40 +0000 (18:08 -0400)]
ASoC: bfin: fix memory leak in sport3 controller driver

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Davinci: McASP: Flush the FIFO before enabling
Vaibhav Bedia [Wed, 8 Aug 2012 15:10:31 +0000 (20:40 +0530)]
ASoC: Davinci: McASP: Flush the FIFO before enabling

FIFO should be flushed before it is enabled for the first time.
This fixes the I/O errors reported by the ASoC core on a fresh boot

Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda - Fix pop noise in headphones on S3 for Asus X55A, X55V
David Henningsson [Thu, 9 Aug 2012 08:56:12 +0000 (10:56 +0200)]
ALSA: hda - Fix pop noise in headphones on S3 for Asus X55A, X55V

To turn off pin control for the pin was tested, and helped against
this issue.

BugLink: https://bugs.launchpad.net/bugs/1034779
Tested-by: Chih-Hsyuan Ho <chih.ho@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add missing SPDIF I/O setup for CA0132
Takashi Iwai [Wed, 8 Aug 2012 15:26:54 +0000 (17:26 +0200)]
ALSA: hda - Add missing SPDIF I/O setup for CA0132

CA0132 driver had some codes to handle the S/PDIF I/O, but the actual
setups of pins and converters were missing.  Now the pins are added.

Also, fixed a few points triggering invalid codec verbs and mixer
elements since the digital I/O audio widgets on CA0132 have no amp.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Use the standard PCM ops for CA0132
Takashi Iwai [Wed, 8 Aug 2012 15:20:18 +0000 (17:20 +0200)]
ALSA: hda - Use the standard PCM ops for CA0132

Now with the workaround using codec->pcm_format_first flag, we can
clean up the home-baked codes in patch_ca0132.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix superfluous "-in" suffix from CA0132 capture items
Takashi Iwai [Wed, 8 Aug 2012 15:15:55 +0000 (17:15 +0200)]
ALSA: hda - Fix superfluous "-in" suffix from CA0132 capture items

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Add codec->pcm_format_first flag
Takashi Iwai [Wed, 8 Aug 2012 15:12:52 +0000 (17:12 +0200)]
ALSA: hda - Add codec->pcm_format_first flag

Introduced a new flag to set up the PCM stream format at first before
the stream_id and channel tag.  Some codecs (e.g. CA0132) seem
preferring this over stream_id -> format order.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: imx-ssi: Remove mono support
Fabio Estevam [Tue, 7 Aug 2012 19:51:34 +0000 (16:51 -0300)]
ASoC: imx-ssi: Remove mono support

Playing a mono track results in incorrect playback rate, ie, the audio
is played at a faster rate.

Remove mono support in the driver by setting 'channes_min' to dual-channel
and this allows mono tracks to be played correctly.

Reported-by: Gaëtan Carlier <gcembed@gmail.com>
Tested-by: Gaëtan Carlier <gcembed@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: mxs: Fix the name of the SoC family
Fabio Estevam [Wed, 8 Aug 2012 03:47:21 +0000 (00:47 -0300)]
ASoC: mxs: Fix the name of the SoC family

SND_SOC_MXS_SGTL5000 is used on MXS boards, so fix the SoC family name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad
David Henningsson [Wed, 8 Aug 2012 06:43:37 +0000 (08:43 +0200)]
ALSA: hda - Fix double quirk for Quanta FL1 / Lenovo Ideapad

The same ID is twice in the quirk table, so the second one is not used.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix ugly debug prints with CONFIG_SND_VERBOSE_PRINTK=y
Takashi Iwai [Tue, 7 Aug 2012 16:09:23 +0000 (18:09 +0200)]
ALSA: hda - Fix ugly debug prints with CONFIG_SND_VERBOSE_PRINTK=y

When CONFIG_SND_VERBOSE_PRINTK=y is set, the debug print in
hda_auto_parser.c looks really ugly like:

  ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
  ALSA sound/pci/hda/hda_auto_parser.c:334    dig-out=0x12/0x0
  ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
  ALSA sound/pci/hda/hda_auto_parser.c:339  Mic=0x11ALSA sound/pci/hda/hda_auto_parser.c:339  Line=0x10
  ALSA sound/pci/hda/hda_auto_parser.c:341
  ALSA sound/pci/hda/hda_auto_parser.c:343    dig-in=0x13

Better to put one item at each line.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoASoC: omap-mcbsp: Fix 6pin mux configuration
Peter Ujfalusi [Tue, 7 Aug 2012 12:37:47 +0000 (15:37 +0300)]
ASoC: omap-mcbsp: Fix 6pin mux configuration

The check for the mux_signal callback was wrong which prevents us to
configure the 6pin port's FSR/CLKR signal mux.

Reported-by: CF Adad <cfadad@rocketmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org (3.4+)
12 years agoALSA: hda - remove redundant auto quirks for conexant 506x
David Henningsson [Tue, 7 Aug 2012 12:03:30 +0000 (14:03 +0200)]
ALSA: hda - remove redundant auto quirks for conexant 506x

Now that the auto model is the default, these quirks are redundant
and can be removed.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - remove quirk for Dell Vostro 1015
David Henningsson [Tue, 7 Aug 2012 12:03:29 +0000 (14:03 +0200)]
ALSA: hda - remove quirk for Dell Vostro 1015

This computer is confirmed working with model=auto on kernel 3.2.
Also, parsing fails with hda-emu with the current model.

Cc: stable@kernel.org (3.2+)
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - add dock support for Thinkpad X230
Felix Kaechele [Mon, 6 Aug 2012 21:02:01 +0000 (23:02 +0200)]
ALSA: hda - add dock support for Thinkpad X230

As with the ThinkPad Models X230 Tablet and T530 the X230 needs a qurik to
correctly set up the pins for the dock port.

Signed-off-by: Felix Kaechele <felix@fetzig.org>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - Fix regression of HDMI codec probing
Takashi Iwai [Mon, 6 Aug 2012 12:49:36 +0000 (14:49 +0200)]
ALSA: hda - Fix regression of HDMI codec probing

The commit c4bfe94a causes a regression on some codecs at probing.
Since this was just a workaround to shut up a kernel warning, it'd be
better to revert and fix properly.  So we ended up with re-adding the
cleanup callback.

Tested-and-reported-by: Matt Horan <matt@matthoran.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - add dock support for Thinkpad T430s
Philipp A. Mohrenweiser [Mon, 6 Aug 2012 11:14:18 +0000 (13:14 +0200)]
ALSA: hda - add dock support for Thinkpad T430s

Add a model/fixup string "lenovo-dock", for Thinkpad T430s, to allow
sound in docking station.

Tested on Lenovo T430s with ThinkPad Mini Dock Plus Series 3

Cc: stable@kernel.org
Signed-off-by: Philipp A. Mohrenweiser <phiamo@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: print small buffers via %*ph[C]
Andy Shevchenko [Thu, 2 Aug 2012 13:52:41 +0000 (16:52 +0300)]
ALSA: print small buffers via %*ph[C]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Mark Brown [Fri, 3 Aug 2012 22:01:54 +0000 (23:01 +0100)]
Merge tag 'asoc-3.6' of git://git./linux/kernel/git/broonie/sound into for-3.6

ASoC: Additional updates for 3.6

A few updates for issues discovered during the merge window, the main
one being the fix for the issues with defaulting to use of regmap
without properly checking if there was I/O in place already.

12 years agoMerge branch 'topic/next' into for-next
Takashi Iwai [Fri, 3 Aug 2012 10:59:38 +0000 (12:59 +0200)]
Merge branch 'topic/next' into for-next

12 years agoALSA: isa: Move snd_legacy_find_free_ioport to initval.h
Ondrej Zary [Wed, 1 Aug 2012 14:05:39 +0000 (16:05 +0200)]
ALSA: isa: Move snd_legacy_find_free_ioport to initval.h

Move snd_legacy_find_free_ioport() function back to initval.h as it is used
by two drivers.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: emu10k1: Avoid access to invalid pages when period=1
Takashi Iwai [Fri, 3 Aug 2012 10:51:21 +0000 (12:51 +0200)]
ALSA: emu10k1: Avoid access to invalid pages when period=1

When period=1, the driver tries to allocate a bit bigger buffer than
requested by the user due to the irq latency tolerance.  This may lead
to accesses over the actually allocated pages.

This patch adds a check of the page index and assigns the silent page
when it's over the given buffer size.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: PCM: Fix possible memory leaks in the error path
Takashi Iwai [Fri, 3 Aug 2012 10:48:32 +0000 (12:48 +0200)]
ALSA: PCM: Fix possible memory leaks in the error path

When the first page allocation failed for sgbuf, it leaks the records
that have been formerly allocated.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoLinux 3.6-rc1
Linus Torvalds [Thu, 2 Aug 2012 23:38:10 +0000 (16:38 -0700)]
Linux 3.6-rc1

12 years agoMerge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc
Linus Torvalds [Thu, 2 Aug 2012 18:52:39 +0000 (11:52 -0700)]
Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc

Pull OLPC platform updates from Andres Salomon:
 "These move the OLPC Embedded Controller driver out of
  arch/x86/platform and into drivers/platform/olpc.

  OLPC machines are now ARM-based (which means lots of x86 and ARM
  changes), but are typically pretty self-contained..  so it makes more
  sense to go through a separate OLPC tree after getting the appropriate
  review/ACKs."

* 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc:
  x86: OLPC: move s/r-related EC cmds to EC driver
  Platform: OLPC: move global variables into priv struct
  Platform: OLPC: move debugfs support from x86 EC driver
  x86: OLPC: switch over to using new EC driver on x86
  Platform: OLPC: add a suspended flag to the EC driver
  Platform: OLPC: turn EC driver into a platform_driver
  Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it
  drivers: OLPC: update various drivers to include olpc-ec.h
  Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver

12 years agoMerge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Thu, 2 Aug 2012 18:50:24 +0000 (11:50 -0700)]
Merge tag 'dt2' of git://git./linux/kernel/git/arm/arm-soc

Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
 "This contains a set of device-tree conversions for Marvell Orion
  platforms that were staged early but took a few tries to get the
  branch into a format where it was suitable for us to pick up.

  Given that most people working on these platforms are hobbyists with
  limited time, we were a bit more flexible with merging it even though
  it came in late."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

Conflicts:
drivers/watchdog/orion_wdt.c

12 years agoMerge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Thu, 2 Aug 2012 18:48:54 +0000 (11:48 -0700)]
Merge tag 'pm2' of git://git./linux/kernel/git/arm/arm-soc

Pull arm-soc cpuidle enablement for OMAP from Olof Johansson:
 "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree,
  but didn't go in because the pull request ended up rejected.  So it
  just got merged, and we got this staged branch that enables the
  coupled cpuidle code on OMAP.

  With a stable git workflow from the other maintainer we could have
  staged this earlier, but that wasn't the case so we have had to merge
  it late.

  The alternative is to hold it off until 3.7 but given that the code is
  well-isolated to OMAP and they are eager to see it go in, I didn't
  push back hard in that direction."

* tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: CPUidle: Open broadcast clock-event device.
  ARM: OMAP4: CPUidle: add synchronization for coupled idle states
  ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.
  ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus

12 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Thu, 2 Aug 2012 18:48:20 +0000 (11:48 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes for merge window fallout, and a bugfix for timer resume on
  PRIMA2."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mmp: add missing irqs.h
  arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
  ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
  ARM: mxc: Include missing irqs.h header

12 years agoMerge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
Linus Torvalds [Thu, 2 Aug 2012 18:45:42 +0000 (11:45 -0700)]
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
  sh: explicitly include sh_dma.h in setup-sh7722.c
  sh: ecovec: care CN5 VBUS if USB host mode
  sh: sh7724: fixup renesas_usbhs clock settings
  sh: intc: initial irqdomain support.
  sh: pfc: Fix up init ordering mess.
  serial: sh-sci: fix compilation breakage, when DMA is enabled
  dmaengine: shdma: restore partial transfer calculation
  sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
  sh: Fix up recursive fault in oops with unset TTB.
  sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
  sh: select the fixed regulator driver on several boards
  sh: ecovec: switch MMC power control to regulators
  sh: add fixed voltage regulators to se7724
  sh: add fixed voltage regulators to sdk7786
  sh: add fixed voltage regulators to rsk
  sh: add fixed voltage regulators to migor
  sh: add fixed voltage regulators to kfr2r09
  sh: add fixed voltage regulators to ap325rxa
  sh: add fixed voltage regulators to sh7757lcr
  sh: add fixed voltage regulators to sh2007
  ...

12 years agoMerge tag 'md-3.6' of git://neil.brown.name/md
Linus Torvalds [Thu, 2 Aug 2012 18:34:40 +0000 (11:34 -0700)]
Merge tag 'md-3.6' of git://neil.brown.name/md

Pull additional md update from NeilBrown:
 "This contains a few patches that depend on plugging changes in the
  block layer so needed to wait for those.

  It also contains a Kconfig fix for the new RAID10 support in dm-raid."

* tag 'md-3.6' of git://neil.brown.name/md:
  md/dm-raid: DM_RAID should select MD_RAID10
  md/raid1: submit IO from originating thread instead of md thread.
  raid5: raid5d handle stripe in batch way
  raid5: make_request use batch stripe release

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Thu, 2 Aug 2012 17:57:31 +0000 (10:57 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull two ceph fixes from Sage Weil:
 "The first patch fixes up the old crufty open intent code to use the
  atomic_open stuff properly, and the second fixes a possible null deref
  and memory leak with the crypto keys."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: fix crypto key null deref, memory leak
  ceph: simplify+fix atomic_open

12 years agoMerge tag 'ecryptfs-3.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 2 Aug 2012 17:56:34 +0000 (10:56 -0700)]
Merge tag 'ecryptfs-3.6-rc1-fixes' of git://git./linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:
 - Fixes a bug when the lower filesystem mount options include 'acl',
   but the eCryptfs mount options do not
 - Cleanups in the messaging code
 - Better handling of empty files in the lower filesystem to improve
   usability.  Failed file creations are now cleaned up and empty lower
   files are converted into eCryptfs during open().
 - The write-through cache changes are being reverted due to bugs that
   are not easy to fix.  Stability outweighs the performance
   enhancements here.
 - Improvement to the mount code to catch unsupported ciphers specified
   in the mount options

* tag 'ecryptfs-3.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: check for eCryptfs cipher support at mount
  eCryptfs: Revert to a writethrough cache model
  eCryptfs: Initialize empty lower files when opening them
  eCryptfs: Unlink lower inode when ecryptfs_create() fails
  eCryptfs: Make all miscdev functions use daemon ptr in file private_data
  eCryptfs: Remove unused messaging declarations and function
  eCryptfs: Copy up POSIX ACL and read-only flags from lower mount

12 years agoMerge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Thu, 2 Aug 2012 17:54:11 +0000 (10:54 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull CIFS update from Steve French:
 "Adds SMB2 rmdir/mkdir capability to the SMB2/SMB2.1 support in cifs.

  I am holding up a few more days on merging the remainder of the
  SMB2/SMB2.1 enablement although it is nearing review completion, in
  order to address some review comments from Jeff Layton on a few of the
  subsequent SMB2 patches, and also to debug an unrelated cifs problem
  that Pavel discovered."

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Add SMB2 support for rmdir
  CIFS: Move rmdir code to ops struct
  CIFS: Add SMB2 support for mkdir operation
  CIFS: Separate protocol specific part from mkdir
  CIFS: Simplify cifs_mkdir call

12 years agomm: remove node_start_pfn checking in new WARN_ON for now
Linus Torvalds [Thu, 2 Aug 2012 17:37:03 +0000 (10:37 -0700)]
mm: remove node_start_pfn checking in new WARN_ON for now

Borislav Petkov reports that the new warning added in commit
88fdf75d1bb5 ("mm: warn if pg_data_t isn't initialized with zero")
triggers for him, and it is the node_start_pfn field that has already
been initialized once.

The call trace looks like this:

  x86_64_start_kernel ->
    x86_64_start_reservations ->
    start_kernel ->
    setup_arch ->
    paging_init ->
    zone_sizes_init ->
    free_area_init_nodes ->
    free_area_init_node

and (with the warning replaced by debug output), Borislav sees

  On node 0 totalpages: 4193848
    DMA zone: 64 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3890 pages, LIFO batch:0
    DMA32 zone: 16320 pages used for memmap
    DMA32 zone: 798464 pages, LIFO batch:31
    Normal zone: 52736 pages used for memmap
    Normal zone: 3322368 pages, LIFO batch:31
  free_area_init_node: pgdat->node_start_pfn: 4423680      <----
  On node 1 totalpages: 4194304
    Normal zone: 65536 pages used for memmap
    Normal zone: 4128768 pages, LIFO batch:31
  free_area_init_node: pgdat->node_start_pfn: 8617984      <----
  On node 2 totalpages: 4194304
    Normal zone: 65536 pages used for memmap
    Normal zone: 4128768 pages, LIFO batch:31
  free_area_init_node: pgdat->node_start_pfn: 12812288     <----
  On node 3 totalpages: 4194304
    Normal zone: 65536 pages used for memmap
    Normal zone: 4128768 pages, LIFO batch:31

so remove the bogus warning for now to avoid annoying people.  Minchan
Kim is looking at it.

Reported-by: Borislav Petkov <bp@amd64.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoARM: mmp: add missing irqs.h
Haojian Zhuang [Mon, 30 Jul 2012 14:20:34 +0000 (22:20 +0800)]
ARM: mmp: add missing irqs.h

arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here
(not in a function)
make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1

Include <mach/irqs.h> to fix this issue.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoarm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
Thomas Petazzoni [Thu, 2 Aug 2012 15:13:47 +0000 (17:13 +0200)]
arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs

The comment was wrongly referring to Armada 370 while the file is
related to Armada XP.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
Barry Song [Mon, 30 Jul 2012 05:29:30 +0000 (13:29 +0800)]
ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes

The only way to write LATCHED registers to write LATCH_BIT to LATCH register,
that will latch COUNTER into LATCHED.e.g.
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base +
SIRFSOC_TIMER_LATCH);

Writing values to LATCHED registers directly is useless at all.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agolibceph: fix crypto key null deref, memory leak
Sylvain Munaut [Thu, 2 Aug 2012 16:12:59 +0000 (09:12 -0700)]
libceph: fix crypto key null deref, memory leak

Avoid crashing if the crypto key payload was NULL, as when it was not correctly
allocated and initialized.  Also, avoid leaking it.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
12 years agoMerge tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Thu, 2 Aug 2012 16:11:25 +0000 (18:11 +0200)]
Merge tag 'asoc-3.6' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Additional updates for 3.6

A few updates for issues discovered during the merge window, the main
one being the fix for the issues with defaulting to use of regmap
without properly checking if there was I/O in place already.

12 years agoceph: simplify+fix atomic_open
Sage Weil [Tue, 31 Jul 2012 18:27:36 +0000 (11:27 -0700)]
ceph: simplify+fix atomic_open

The initial ->atomic_open op was carried over from the old intent code,
which was incomplete and didn't really work.  Replace it with a fresh
method.  In particular:

 * always attempt to do an atomic open+lookup, both for the create case
   and for lookups of existing files.
 * fix symlink handling by returning 1 to the VFS so that we can follow
   the link to its destination. This fixes a longstanding ceph bug (#2392).

Signed-off-by: Sage Weil <sage@inktank.com>
12 years agoASoC: core: Fix check before defaulting to regmap
Mark Brown [Wed, 1 Aug 2012 19:05:47 +0000 (20:05 +0100)]
ASoC: core: Fix check before defaulting to regmap

Check if the chip has provided a write operation (which is mandatory for
I/O) rather than looking for control data as some of the MFDs use a global
for this. Also skip the attempt if there's no regmap available by device
in case things get confused by the attempt to default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
12 years agoALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC
Takashi Iwai [Thu, 2 Aug 2012 07:04:39 +0000 (09:04 +0200)]
ALSA: hda - Support dock on Lenovo Thinkpad T530 with ALC269VC

Lenovo Thinkpad T530 with ALC269VC codec has a dock port but BIOS
doesn't set up the pins properly.  Enable the pins as well as on
Thinkpad X230 Tablet.

Reported-and-tested-by: Mario <anyc@hadiko.de>
Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agosh: explicitly include sh_dma.h in setup-sh7722.c
Guennadi Liakhovetski [Wed, 1 Aug 2012 08:44:57 +0000 (10:44 +0200)]
sh: explicitly include sh_dma.h in setup-sh7722.c

setup-sh7722.c defines several objects, whose types are defined in
sh_dma.h, so, it has to be included explicitly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Wed, 1 Aug 2012 23:47:15 +0000 (16:47 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The lion share of this pull request are fixes for clk-related breakage
  caused by other changes during this merge window.  For some platforms
  the fix was as simple as selecting HAVE_CLK, for others like the
  Loongson 2 significant restructuring was required.

  The remainder are changes required to get the Lantiq code to work
  again."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Loongson 2: Sort out clock managment.
  MIPS: Loongson 1: more clk support and add select HAVE_CLK
  MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK
  MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK
  MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK
  MIPS: Lantiq: Platform specific CLK fixup
  MIPS: Lantiq: Add device_tree_init function
  MIPS: Lantiq: Fix interface clock and PCI control register offset

12 years agoMerge branch 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 1 Aug 2012 23:45:02 +0000 (16:45 -0700)]
Merge branch 'for-linus-3.6-rc1' of git://git./linux/kernel/git/rw/uml

Pull UML fixes from Richard Weinberger:
 "This patch set contains mostly fixes and cleanups.  The UML tty driver
  uses now tty_port and is no longer broken like hell  :-)"

* 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Add arch/x86/um to MAINTAINERS
  um: pass siginfo to guest process
  um: fix ubd_file_size for read-only files
  um: pull interrupt_end() into userspace()
  um: split syscall_trace(), pass pt_regs to it
  um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs
  um: set BLK_CGROUP=y in defconfig
  um: remove count_lock
  um: fully use tty_port
  um: Remove dead code
  um: remove line_ioctl()
  TTY: um/line, use tty from tty_port
  TTY: um/line, add tty_port