lyx [Wed, 13 Oct 2010 01:22:17 +0000 (18:22 -0700)]
spi:do spin_unlock before msg callback function, fix xpt_2046 bug as follow:
[ 344.540000] BUG: spinlock lockup on CPU#0, swapper/0,
cd417880
[ 344.540000] [<
c044e0bc>] (unwind_backtrace+0x0/0xdc) from [<
c06f2a4c>] (dump_stack+0x18/0x1c)
[ 344.540000] [<
c06f2a4c>] (dump_stack+0x18/0x1c) from [<
c055a1a4>] (_raw_spin_lock+0x128/0x168)
[ 344.540000] [<
c055a1a4>] (_raw_spin_lock+0x128/0x168) from [<
c06f5fec>] (_spin_lock_irqsave+0x5c/0x68)
[ 344.540000] [<
c06f5fec>] (_spin_lock_irqsave+0x5c/0x68) from [<
c05b4b50>] (rk2818_spi_quick_transfer+0x30/0xb0)
[ 344.540000] [<
c05b4b50>] (rk2818_spi_quick_transfer+0x30/0xb0) from [<
c05b21d8>] (spi_async+0xa4/0xb0)
[ 344.540000] [<
c05b21d8>] (spi_async+0xa4/0xb0) from [<
c05fa42c>] (xpt2046_rx_val+0xd4/0x110)
[ 344.540000] [<
c05fa42c>] (xpt2046_rx_val+0xd4/0x110) from [<
c05b3470>] (msg_giveback+0x6c/0x70)
[ 344.540000] [<
c05b3470>] (msg_giveback+0x6c/0x70) from [<
c05b46a0>] (rk2818_pump_messages+0x568/0x598)
[ 344.540000] [<
c05b46a0>] (rk2818_pump_messages+0x568/0x598) from [<
c05b4bbc>] (rk2818_spi_quick_transfer+0x9c/0xb0)
[ 344.540000] [<
c05b4bbc>] (rk2818_spi_quick_transfer+0x9c/0xb0) from [<
c05b21d8>] (spi_async+0xa4/0xb0)
[ 344.540000] [<
c05b21d8>] (spi_async+0xa4/0xb0) from [<
c05fa548>] (xpt2046_timer+0xe0/0x120)
[ 344.540000] [<
c05fa548>] (xpt2046_timer+0xe0/0x120) from [<
c047cc24>] (__run_hrtimer+0x90/0xec)
[ 344.540000] [<
c047cc24>] (__run_hrtimer+0x90/0xec) from [<
c047cf64>] (hrtimer_interrupt+0x198/0x218)
[ 344.540000] [<
c047cf64>] (hrtimer_interrupt+0x198/0x218) from [<
c04527c4>] (rk2818_timer_clockevent_interrupt+0x28/0x34)
[ 344.540000] [<
c04527c4>] (rk2818_timer_clockevent_interrupt+0x28/0x34) from [<
c049ba0c>] (handle_IRQ_event+0x2c/0xfc)
[ 344.540000] [<
c049ba0c>] (handle_IRQ_event+0x2c/0xfc) from [<
c049d908>] (handle_level_irq+0xbc/0x130)
[ 344.540000] [<
c049d908>] (handle_level_irq+0xbc/0x130) from [<
c0448070>] (asm_do_IRQ+0x70/0x8c)
[ 344.540000] [<
c0448070>] (asm_do_IRQ+0x70/0x8c) from [<
c0448ac8>] (__irq_svc+0x48/0xc0)
cym [Wed, 13 Oct 2010 01:19:58 +0000 (09:19 +0800)]
modify board-raho-0928.c for lp8725 DVS pin control
黄涛 [Tue, 12 Oct 2010 10:26:37 +0000 (18:26 +0800)]
uImage: 使用gzip compressed方式生成uImage
UBOOT解压缩内核比内核自解压要快1.6s,可以提高启动速度。
不压缩是最快的,lzo稍慢,以后有机会可以迁移到lzo压缩方式。
黄涛 [Tue, 12 Oct 2010 09:52:55 +0000 (17:52 +0800)]
spi_fpga_init: fix slab corruption bug
fix this bug:
[ 74.920000] bt turn on power
bcm4329
patch_plus -d /etc/bluez/bcm4325/BCM4329B1_TestOnly_0237_26MHz_SEMCO_B23.hcd /dev/ttySPI0 bcm4325
1500000
speed of uart to :
1500000
[ 75.330000] uart->index=0
[ 75.330000] baud=115200,quot=0x34
[ 75.340000] baud=115200,quot=0x34
[ 75.340000] Slab corruption: size-32 start=
cc3b3660, len=32
[ 75.340000] 010: 6b 6b 6b 6b b4 36 3b cc 6b 6b 6b 6b 6b 6b 6b a5
[ 75.370000] Prev obj: start=
cc3b3640, len=32
[ 75.370000] 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
[ 75.370000] 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
[ 75.370000] Next obj: start=
cc3b3680, len=32
[ 75.370000] 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
[ 75.370000] 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
黄涛 [Tue, 12 Oct 2010 09:48:27 +0000 (17:48 +0800)]
spi_gpio: fix sleep in atomic
fix this bug:
BUG: sleeping function called from invalid context at mm/slab.c:3018
in_atomic(): 1, irqs_disabled(): 128, pid: 1, name: swapper
1 lock held by swapper/1:
#0: (&gpio_lock_class#2){......}, at: [<
c049d4a0>] __setup_irq+0xe4/0x320
[<
c044f108>] (unwind_backtrace+0x0/0xdc) from [<
c06f3ac0>] (dump_stack+0x18/0x1c)
[<
c06f3ac0>] (dump_stack+0x18/0x1c) from [<
c045cc8c>] (__might_sleep+0x124/0x144)
[<
c045cc8c>] (__might_sleep+0x124/0x144) from [<
c04c7208>] (kmem_cache_alloc+0x44/0x62c)
[<
c04c7208>] (kmem_cache_alloc+0x44/0x62c) from [<
c05b7bec>] (spi_gpio_irq_set_type+0x2c/0xac)
[<
c05b7bec>] (spi_gpio_irq_set_type+0x2c/0xac) from [<
c049cec4>] (__irq_set_trigger+0x3c/0x8c)
[<
c049cec4>] (__irq_set_trigger+0x3c/0x8c) from [<
c049d514>] (__setup_irq+0x158/0x320)
[<
c049d514>] (__setup_irq+0x158/0x320) from [<
c049d7c0>] (request_threaded_irq+0xe4/0x130)
[<
c049d7c0>] (request_threaded_irq+0xe4/0x130) from [<
c05ba708>] (rockchip_headsetobserve_probe+0xdc/0x114)
[<
c05ba708>] (rockchip_headsetobserve_probe+0xdc/0x114) from [<
c059d290>] (platform_drv_probe+0x20/0x24)
[<
c059d290>] (platform_drv_probe+0x20/0x24) from [<
c059c294>] (driver_probe_device+0xb0/0x160)
[<
c059c294>] (driver_probe_device+0xb0/0x160) from [<
c059c3ac>] (__driver_attach+0x68/0x8c)
[<
c059c3ac>] (__driver_attach+0x68/0x8c) from [<
c059ba84>] (bus_for_each_dev+0x54/0x94)
[<
c059ba84>] (bus_for_each_dev+0x54/0x94) from [<
c059c0f8>] (driver_attach+0x20/0x28)
[<
c059c0f8>] (driver_attach+0x20/0x28) from [<
c059b350>] (bus_add_driver+0xa8/0x240)
[<
c059b350>] (bus_add_driver+0xa8/0x240) from [<
c059c6c0>] (driver_register+0xb0/0x140)
[<
c059c6c0>] (driver_register+0xb0/0x140) from [<
c059d6e4>] (platform_driver_register+0x4c/0x60)
[<
c059d6e4>] (platform_driver_register+0x4c/0x60) from [<
c0418bd0>] (rockchip_headsetobserve_init+0x14/0x20)
[<
c0418bd0>] (rockchip_headsetobserve_init+0x14/0x20) from [<
c0449364>] (do_one_initcall+0x64/0x1c0)
[<
c0449364>] (do_one_initcall+0x64/0x1c0) from [<
c0408474>] (kernel_init+0xa4/0x11c)
[<
c0408474>] (kernel_init+0xa4/0x11c) from [<
c044a8fc>] (kernel_thread_exit+0x0/0x8)
黄涛 [Tue, 12 Oct 2010 09:39:20 +0000 (17:39 +0800)]
spi_fpga_fw: fix access uninitialized spin_lock bug
fix this bug:
BUG: spinlock bad magic on CPU#0, swapper/1
lock:
c0c83ffc, .magic:
00000000, .owner: <none>/-1, .owner_cpu: 0
[<
c044f108>] (unwind_backtrace+0x0/0xdc) from [<
c06f39e0>] (dump_stack+0x18/0x1c)
[<
c06f39e0>] (dump_stack+0x18/0x1c) from [<
c055aaa8>] (spin_bug+0x90/0xa4)
[<
c055aaa8>] (spin_bug+0x90/0xa4) from [<
c055abf0>] (_raw_spin_lock+0x2c/0x168)
[<
c055abf0>] (_raw_spin_lock+0x2c/0x168) from [<
c06f6f84>] (_spin_lock_irqsave+0x5c/0x68)
[<
c06f6f84>] (_spin_lock_irqsave+0x5c/0x68) from [<
c0418a78>] (fpga_dl_fw+0x98/0x358)
[<
c0418a78>] (fpga_dl_fw+0x98/0x358) from [<
c040da68>] (machine_rk2818_board_init+0x94/0x124)
[<
c040da68>] (machine_rk2818_board_init+0x94/0x124) from [<
c040a8c8>] (customize_machine+0x20/0x2c)
[<
c040a8c8>] (customize_machine+0x20/0x2c) from [<
c0449364>] (do_one_initcall+0x64/0x1c0)
[<
c0449364>] (do_one_initcall+0x64/0x1c0) from [<
c04085f4>] (kernel_init+0xa4/0x11c)
[<
c04085f4>] (kernel_init+0xa4/0x11c) from [<
c044a8fc>] (kernel_thread_exit+0x0/0x8)
黄涛 [Tue, 12 Oct 2010 09:30:48 +0000 (17:30 +0800)]
dma: fix sleep in atomic bug
dma_alloc_coherent use GFP_ATOMIC, fix this bug:
BUG: sleeping function called from invalid context at mm/page_alloc.c:1939
in_atomic(): 1, irqs_disabled(): 0, pid: 44, name: mmcqd
2 locks held by mmcqd/44:
#0: (&host->lock){......}, at: [<
c0631fec>] rk2818_sdmmc_request+0x38/0x7c
#1: (&rk2818_dma[i].lock){......}, at: [<
c04574e4>] rk28_dma_request+0x28/0x108
[<
c044f108>] (unwind_backtrace+0x0/0xdc) from [<
c06f3ac0>] (dump_stack+0x18/0x1c)
[<
c06f3ac0>] (dump_stack+0x18/0x1c) from [<
c045cc8c>] (__might_sleep+0x124/0x144)
[<
c045cc8c>] (__might_sleep+0x124/0x144) from [<
c04a8174>] (__alloc_pages_nodemask+0xb8/0x5ac)
[<
c04a8174>] (__alloc_pages_nodemask+0xb8/0x5ac) from [<
c044fc70>] (__dma_alloc+0x150/0x3e0)
[<
c044fc70>] (__dma_alloc+0x150/0x3e0) from [<
c044ff8c>] (dma_alloc_coherent+0x58/0x64)
[<
c044ff8c>] (dma_alloc_coherent+0x58/0x64) from [<
c0457534>] (rk28_dma_request+0x78/0x108)
[<
c0457534>] (rk28_dma_request+0x78/0x108) from [<
c044e3b4>] (request_dma+0x7c/0xa8)
[<
c044e3b4>] (request_dma+0x7c/0xa8) from [<
c0631d70>] (rk2818_sdmmc_start_request+0x25c/0x38c)
[<
c0631d70>] (rk2818_sdmmc_start_request+0x25c/0x38c) from [<
c063200c>] (rk2818_sdmmc_request+0x58/0x7c)
[<
c063200c>] (rk2818_sdmmc_request+0x58/0x7c) from [<
c0629fa8>] (mmc_wait_for_req+0x150/0x16c)
[<
c0629fa8>] (mmc_wait_for_req+0x150/0x16c) from [<
c06307b0>] (mmc_blk_issue_rq+0x234/0x4b8)
[<
c06307b0>] (mmc_blk_issue_rq+0x234/0x4b8) from [<
c06313b4>] (mmc_queue_thread+0x100/0x104)
[<
c06313b4>] (mmc_queue_thread+0x100/0x104) from [<
c047a868>] (kthread+0x84/0x8c)
[<
c047a868>] (kthread+0x84/0x8c) from [<
c044a8fc>] (kernel_thread_exit+0x0/0x8)
lbt [Tue, 12 Oct 2010 09:19:56 +0000 (17:19 +0800)]
net:wireless:bcm4329: 1. add dhd custom gpio control
2. fixed sdio_register_driver timeout
黄涛 [Sun, 10 Oct 2010 10:28:18 +0000 (18:28 +0800)]
adckey: 增加名字板级自定义,允许厂商在Android中定义不同的键盘映射
宋秀杰 [Sat, 9 Oct 2010 13:02:03 +0000 (06:02 -0700)]
pm.c reduce VCCIO and VCCSD is 2.8V. spi_fpga_init.c make key_led pin and cmmb pin disable
cym [Sat, 9 Oct 2010 06:17:19 +0000 (14:17 +0800)]
move lp8725 DVS pin control function to board_raho.c
lyx [Fri, 8 Oct 2010 13:53:03 +0000 (06:53 -0700)]
board raho 0928: update defconfig
lyx [Fri, 8 Oct 2010 13:20:45 +0000 (06:20 -0700)]
wm8994: checkout for bluetooth
vibrator: checkout for board_raho_0928
lyx [Fri, 8 Oct 2010 12:07:31 +0000 (05:07 -0700)]
board raho 0928: modify defconfig, add it7250 touchscreen
宋秀杰 [Fri, 8 Oct 2010 11:53:32 +0000 (04:53 -0700)]
default open pm control
宋秀杰 [Fri, 8 Oct 2010 11:26:31 +0000 (04:26 -0700)]
在spi驱动休眠和唤醒的函数中加了解决spi_cs0漏电的代码,更新触摸面板的驱动
root [Fri, 8 Oct 2010 11:48:06 +0000 (19:48 +0800)]
fix compile error of board-raho-0928.c
lyx [Fri, 8 Oct 2010 11:27:21 +0000 (04:27 -0700)]
battery & sdmmc: add board raho 0928 support
root [Fri, 8 Oct 2010 10:43:27 +0000 (18:43 +0800)]
cmmb:board-raho-0928.c
lyx [Fri, 8 Oct 2010 02:51:17 +0000 (19:51 -0700)]
backlight: clk_disable should appear after clk_enable
root [Fri, 8 Oct 2010 06:39:20 +0000 (14:39 +0800)]
add cmmb io init interface in board file.
lyx [Thu, 7 Oct 2010 10:25:18 +0000 (03:25 -0700)]
board-raho-0928: add new board type, use make rk2818_raho_0928_defconfig to config new board
root [Thu, 7 Oct 2010 09:42:04 +0000 (17:42 +0800)]
sort cmmb code , manager the gpios in board file.
root [Thu, 30 Sep 2010 08:22:46 +0000 (16:22 +0800)]
give up receving the message when download firmware
root [Thu, 30 Sep 2010 07:59:37 +0000 (15:59 +0800)]
add delay after download SIANO firmware to fix the bug of initialized
failure.
luowei [Thu, 7 Oct 2010 05:58:40 +0000 (13:58 +0800)]
add function that loading fpga firmware online
cym [Thu, 30 Sep 2010 09:56:16 +0000 (17:56 +0800)]
修改不能重启(reboot)的BUG,reboot前ddr降频到136M,arm降频24M,关闭dsp,关闭lcdc
root [Wed, 29 Sep 2010 11:29:08 +0000 (19:29 +0800)]
config the CMMB compile type as module
hxy [Wed, 29 Sep 2010 08:03:12 +0000 (16:03 +0800)]
apanic start to write flash must be aligned to block
hxy [Wed, 29 Sep 2010 08:00:31 +0000 (16:00 +0800)]
if config DM9000 or kpanic, no use mutex_lock
lhh [Wed, 29 Sep 2010 03:42:57 +0000 (11:42 +0800)]
add i2c tp ntp070
srt [Wed, 29 Sep 2010 01:29:46 +0000 (09:29 +0800)]
add auto TScalibration in raho
lyx [Tue, 28 Sep 2010 09:16:31 +0000 (02:16 -0700)]
raho defconfig: remove dm9000
黄涛 [Tue, 28 Sep 2010 07:28:34 +0000 (15:28 +0800)]
Revert "rk2818_fb: use codec pll"
This reverts commit
d9479fe5d6b897cf980398e9537f8f67b8b495fa.
当以下条件同时满足时,RK281x的LCDC内部硬件存在bug,可能会导致概率性的横条纹现象。
(1)LCDC_DCLK不是ARM_PLL分频;
(2)win0视频进行旋转;
(3)win0视频格式为YUV4201(拼凑格式);
(4)在视频宽度上(旋转后为高度)有缩小时;
解决方案:在硬件bug解除之前,在以上的应用场景下,保证LCDC_DCLK时钟源为ARM_PLL分频。
lhh [Tue, 28 Sep 2010 04:54:29 +0000 (12:54 +0800)]
update rk2818_info_it50_defconfig
ChenJQ [Tue, 28 Sep 2010 02:20:41 +0000 (19:20 -0700)]
在wm8994中修改蓝牙通话配置和耳机通话配置,修改蓝牙通话音量
root [Mon, 27 Sep 2010 06:32:36 +0000 (14:32 +0800)]
modify psensor power on
黄涛 [Mon, 27 Sep 2010 06:08:15 +0000 (14:08 +0800)]
fpga: spi_gpio: fix memory leak and corruption, more static
宋秀杰 [Mon, 27 Sep 2010 03:46:07 +0000 (20:46 -0700)]
close lp8725 control in pm.c
黄涛 [Mon, 27 Sep 2010 02:53:01 +0000 (10:53 +0800)]
devices: fix gcc warning: resources_uart* defined but not used
ChenJQ [Sun, 26 Sep 2010 09:54:35 +0000 (02:54 -0700)]
change headset incall volume for raho
宋秀杰 [Fri, 1 Oct 2010 14:26:15 +0000 (07:26 -0700)]
open touchscreen it7250 suspend and resume
宋秀杰 [Fri, 1 Oct 2010 13:00:52 +0000 (06:00 -0700)]
add pmu channel control in pm.c, old file do not support it
lhh [Sat, 25 Sep 2010 12:07:13 +0000 (20:07 +0800)]
Merge branch 'develop' of lhh@10.10.10.201:/home/rockchip/rk2818/kernel into develop
lhh [Sat, 25 Sep 2010 12:06:27 +0000 (20:06 +0800)]
add hym8563 alarm can work when system suspend
kfx [Sat, 25 Sep 2010 09:31:03 +0000 (17:31 +0800)]
i2c don NOT suspend when system enter sleep
ChenJQ [Sat, 25 Sep 2010 08:57:01 +0000 (01:57 -0700)]
解决wm8994配置调用报错的问题
cym [Sat, 25 Sep 2010 07:29:08 +0000 (15:29 +0800)]
modify drivers/regulator/rk2818_lp8725.c for lilo enable/disable function bug
lyx [Sat, 25 Sep 2010 06:42:20 +0000 (23:42 -0700)]
spi:improve spi read of full duplex
1.write 0 to spi send bufer only once, or spi may receive unexpect data
luowei [Fri, 24 Sep 2010 14:05:57 +0000 (22:05 +0800)]
improve something for fpga
root [Fri, 24 Sep 2010 13:51:59 +0000 (21:51 +0800)]
fix the irq error when release cmmb irq
luowei [Fri, 24 Sep 2010 13:43:37 +0000 (21:43 +0800)]
improve something for fpga
root [Fri, 24 Sep 2010 09:05:38 +0000 (17:05 +0800)]
fall down the pixel clock input hx8357 lcd
lyx [Fri, 24 Sep 2010 08:11:01 +0000 (01:11 -0700)]
backlight: backlight shine when frenquence change, fix it
1.use pwd clk
2.when write register, should disable clk, enable it after writen
hxy [Fri, 24 Sep 2010 07:46:33 +0000 (15:46 +0800)]
protect handle before calling regulator_set_current_limit
lyx [Fri, 24 Sep 2010 06:36:32 +0000 (23:36 -0700)]
spi: add spi transfer mode, full duplex and half duplex
root [Fri, 24 Sep 2010 03:34:24 +0000 (11:34 +0800)]
clear usb flag when pull out usb
root [Fri, 24 Sep 2010 03:31:47 +0000 (11:31 +0800)]
modify how to monitor whether charge is full
chenli [Wed, 22 Sep 2010 01:12:19 +0000 (09:12 +0800)]
默认情况下关闭psensor
黄涛 [Fri, 24 Sep 2010 10:05:15 +0000 (18:05 +0800)]
clock: ARM运行在192时,AHB保持为192,临时解决播放720p时,屏幕花屏的问题
root [Fri, 24 Sep 2010 09:59:21 +0000 (17:59 +0800)]
fix the compile warning of siano Kconfig file
root [Fri, 24 Sep 2010 08:33:56 +0000 (16:33 +0800)]
fix the cmmb irq release error
root [Sun, 19 Sep 2010 10:06:29 +0000 (18:06 +0800)]
modify smsspiphy_rk.c,set the gpio type as pull up
root [Sun, 19 Sep 2010 08:07:07 +0000 (16:07 +0800)]
fix cmmb compile error
root [Sun, 19 Sep 2010 02:43:27 +0000 (10:43 +0800)]
update cmmb driver
宋秀杰 [Tue, 21 Sep 2010 11:56:38 +0000 (04:56 -0700)]
fix the Response of PWR key in resume
宋秀杰 [Tue, 21 Sep 2010 10:41:57 +0000 (03:41 -0700)]
update pm control for raho, default close
ddl [Tue, 21 Sep 2010 10:15:08 +0000 (18:15 +0800)]
camera:fix camera client connect error,because capture videobuf queue may be not dequeue before camera is closed. Add stream control for vip
黄涛 [Tue, 21 Sep 2010 10:15:30 +0000 (18:15 +0800)]
clock: clk_get_rate不加锁
黄涛 [Tue, 21 Sep 2010 09:19:23 +0000 (17:19 +0800)]
dsp: 移植.25,打开dsp时关闭arm电源域
黄涛 [Tue, 21 Sep 2010 09:13:47 +0000 (17:13 +0800)]
clock: fix warning in softirq.c
ChenJQ [Tue, 21 Sep 2010 19:13:48 +0000 (12:13 -0700)]
set menuconfig for wm8994 codec
ChenJQ [Tue, 21 Sep 2010 06:33:48 +0000 (23:33 -0700)]
add wm8994 Parameters to menuconfig.include set volume,chose earpiece and BB input signal type
黄涛 [Mon, 20 Sep 2010 10:18:40 +0000 (18:18 +0800)]
defconfig: enable CONSOLE_EARLYSUSPEND disable FB_EARLYSUSPEND
由于我们使用了fb console,休眠也要使用console earlysuspend,两者必须匹配,否则休眠时会有一秒的延时。
宋秀杰 [Mon, 20 Sep 2010 06:50:53 +0000 (23:50 -0700)]
using memcpy lead to Array bounds error, fix it
黄涛 [Mon, 20 Sep 2010 03:58:55 +0000 (11:58 +0800)]
clock: 获取/设置clk时,不关闭中断(除改变arm clk),只关闭软中断(dsp会在timer中访问),避免断音。减小dsp变频时的delay
lyx [Sun, 19 Sep 2010 11:57:53 +0000 (04:57 -0700)]
usb: move struct usb_mass_storage_platform_data to board_xxx.c
Rich.jiangyk [Sun, 19 Sep 2010 11:49:54 +0000 (19:49 +0800)]
fix bug in xpt2046_ts.c, move ahead data discard.
The configuration for XPT2046 TS driver with CALIBRATION is "XPT2046 based touchscreens: XPT2046 SPI Interface".
In this modification, the first raw data is discarded before processed, so that it can work on IT50.
lyx [Sun, 19 Sep 2010 09:52:05 +0000 (02:52 -0700)]
usb: hide usb_mass_storage 2
nand flash user area is recognise as a usb device when connect to computer, we hide it now
lyx [Sun, 19 Sep 2010 07:45:07 +0000 (00:45 -0700)]
adc key:modify adckey for raho
1.reset adckey value for the vccio now is 3V againest old 3.3v;
2.modify touchscreen key_find to key_search
黄涛 [Sun, 19 Sep 2010 02:32:28 +0000 (10:32 +0800)]
info: enable ubi to support udisk
Rich.jiangyk [Fri, 17 Sep 2010 03:41:35 +0000 (11:41 +0800)]
Correct xpt2046_cbn_ts bug on IT50
On IT50 board, the touch screen sends 4095 invalid message for first raw data sample, especially
for the top-left corner.
The modification discards the first sample before processing it, which correct the bug and solve
the problem on IT50. This won't affect other boards.
NOTE: mod by srt, commit by jyk
Rich.jiangyk [Thu, 16 Sep 2010 08:47:25 +0000 (16:47 +0800)]
Merge branch 'develop' of 10.10.10.201:/home/rockchip/rk2818/kernel into develop
lhh [Thu, 16 Sep 2010 08:45:42 +0000 (16:45 +0800)]
Merge branch 'develop' of lhh@10.10.10.201:/home/rockchip/rk2818/kernel into develop
Rich.jiangyk [Thu, 16 Sep 2010 07:00:10 +0000 (15:00 +0800)]
update rk2818_backlight.c to correct bl suspend and resume
1. old rk2818_backlight.c use CONFIG_ANDROID_POWER macro, which is no longer supported,
lyx changed to use CONFIG_HAS_EARLYSUSPEND. This sovled lcd blanking when resuming.
2. changed backlight module init into late_initcall from rootfs_initcall, this solve the
problem of blanking when powered on.
3. updated: close dbg info and comments.
note: code mod by lyx, commited by jyk
lhh [Thu, 16 Sep 2010 08:45:04 +0000 (16:45 +0800)]
enter key code 232
宋秀杰 [Thu, 16 Sep 2010 08:33:42 +0000 (01:33 -0700)]
add delay after pll change in pm.c, fix sdk can not be resume
Rich.jiangyk [Thu, 16 Sep 2010 07:00:10 +0000 (15:00 +0800)]
update rk2818_backlight.c to correct bl suspend and resume
1. old rk2818_backlight.c use CONFIG_ANDROID_POWER macro, which is no longer supported,
lyx changed to use CONFIG_HAS_EARLYSUSPEND. This sovled lcd blanking when resuming.
2. changed backlight module init into late_initcall from rootfs_initcall, this solve the
problem of blanking when powered on.
note: code mod by lyx, commited by jyk
luowei [Thu, 16 Sep 2010 03:32:43 +0000 (11:32 +0800)]
add falling and rising edge support for fpga's gpio interrupt,add support that fpga's gpio interrupt wake system while system is suspending
宋秀杰 [Wed, 15 Sep 2010 13:42:12 +0000 (06:42 -0700)]
modify pm.c, make resume stable, default close control
lbt [Wed, 15 Sep 2010 09:33:41 +0000 (17:33 +0800)]
bsp:modify wifi and bt gpio control for the infoit50 board
宋秀杰 [Tue, 14 Sep 2010 14:20:07 +0000 (07:20 -0700)]
flash pm.c, default close it control
swj [Tue, 14 Sep 2010 10:23:01 +0000 (03:23 -0700)]
modified gsensor for it50
宋秀杰 [Tue, 14 Sep 2010 09:12:33 +0000 (02:12 -0700)]
add rk2818_pm.h
lhh [Tue, 14 Sep 2010 08:53:17 +0000 (16:53 +0800)]
it50 key charge
宋秀杰 [Tue, 14 Sep 2010 08:34:23 +0000 (01:34 -0700)]
add raho pm control, add LCDC resume
宋秀杰 [Wed, 8 Sep 2010 13:53:28 +0000 (06:53 -0700)]
update rk2818_info_defconfig for expand gpio
srt [Tue, 14 Sep 2010 07:10:31 +0000 (15:10 +0800)]
auto TS Calibration: auto switch support between info_sdk and it50
srt [Tue, 14 Sep 2010 02:58:17 +0000 (10:58 +0800)]
add Auto set TS calibration Function
srt [Tue, 14 Sep 2010 02:17:18 +0000 (10:17 +0800)]
add Auto set TS calibration Function