ARC: uaccess: get_user to zero out dest in cause of fault

commit 05d9d0b96e53c52a113fd783c0c97c830c8dc7af upstream.

Al reported potential issue with ARC get_user() as it wasn't clearing
out destination pointer in case of fault due to bad address etc.

Verified using following

| {
|   u32 bogus1 = 0xdeadbeef;
| u64 bogus2 = 0xdead;
| int rc1, rc2;
|
|   pr_info("Orig values %x %llx\n", bogus1, bogus2);
| rc1 = get_user(bogus1, (u32 __user *)0x40000000);
| rc2 = get_user(bogus2, (u64 __user *)0x50000000);
| pr_info("access %d %d, new values %x %llx\n",
| rc1, rc2, bogus1, bogus2);
| }

| [ARCLinux]# insmod /mnt/kernel-module/qtn.ko
| Orig values deadbeef dead
| access -14 -14, new values 0 0

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: get_user() should zero on failure

commit fd2d2b191fe75825c4c7a6f12f3fef35aaed7dd7 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

score: fix __get_user/get_user

commit c2f18fa4cbb3ad92e033a24efa27583978ce9600 upstream.

* should zero on any failure
* __get_user() should use __copy_from_user(), not copy_from_user()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: fix __get_user()

commit 2e29f50ad5e23db37dde9be71410d95d50241ecd upstream.

a) should not leave crap on fault
b) should _not_ require access_ok() in any cases.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh64: failing __get_user() should zero

commit c6852389228df9fb3067f94f3b651de2a7921b36 upstream.

It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m32r: fix __get_user()

commit c90a3bc5061d57e7931a9b7ad14784e1a0ed497d upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mn10300: failing __get_user() and get_user() should zero

commit 43403eabf558d2800b429cd886e996fd555aa542 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix minor infoleak in get_user_ex()

commit 1c109fabbd51863475cd12ac206bdd249aee35af upstream.

get_user_ex(x, ptr) should zero x on failure.  It's not a lot of a leak
(at most we are leaking uninitialized 64bit value off the kernel stack,
and in a fairly constrained situation, at that), but the fix is trivial,
so...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ This sat in different branch from the uaccess fixes since mid-August ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

microblaze: fix copy_from_user()

commit d0cf385160c12abd109746cad1f13e3b3e8b50b8 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

avr32: fix copy_from_user()

commit 8630c32275bac2de6ffb8aea9d9b11663e7ad28e upstream.

really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler.  Left that way,
zeroing added in inline wrapper.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

microblaze: fix __get_user()

commit e98b9e37ae04562d52c96f46b3cf4c2e80222dc1 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix iov_iter_fault_in_readable()

commit d4690f1e1cdabb4d61207b6787b1605a0dc0aeab upstream.

... by turning it into what used to be multipages counterpart

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/atmel-aic: Fix potential deadlock in ->xlate()

commit 5eb0d6eb3fac3daa60d9190eed9fa41cf809c756 upstream.

aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip
lock without disabling interrupts, which can lead to a deadlock if an
interrupt occurs while the lock is held in one of these functions.

Replace irq_gc_{lock,unlock}() calls by
irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from
happening.

Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers

commit ebf9ff753c041b296241990aef76163bbb2cc9c8 upstream.

Some irqchip drivers need to take the generic chip lock outside of the
irq context.

Provide the irq_gc_{lock_irqsave,unlock_irqrestore}() helpers to allow
one to disable irqs while entering a critical section protected by
gc->lock.

Note that we do not provide optimized version of these helpers for !SMP,
because they are not called from the hot-path.

[ tglx: Added a comment when these helpers should be [not] used ]

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-1-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Only use compat ioctl for addfb2 on X86/IA64

commit 47a66e45d7a7613322549c2475ea9d809baaf514 upstream.

Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an
unaligned 64 bit field (modifier). This get packed differently between
32 bit and 64 bit modes on architectures that can handle unaligned 64
bit access (X86 and IA64).  Other architectures pack the structs the
same and don't need the compat wrapper. Use the same condition for
drm_mode_fb_cmd2 as we use for drm_update_draw.

Note that only the modifier will be packed differently between compat
and non-compat versions.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
[seanpaul added not at bottom of commit msg re: modifier]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: atmel-hlcdc: Fix vertical scaling

commit d31ed3f05763644840c654a384eaefa94c097ba2 upstream.

The code is applying the same scaling for the X and Y components,
thus making the scaling feature only functional when both components
have the same scaling factor.

Do the s/_w/_h/ replacement where appropriate to fix vertical scaling.

Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de>
Fixes: 1a396789f65a2 ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: simplify napi_synchronize() to avoid warnings

commit facc432faa59414bd7c60c307ff1645154a66c98 upstream.

The napi_synchronize() function is defined twice: The definition
for SMP builds waits for other CPUs to be done, while the uniprocessor
variant just contains a barrier and ignores its argument.

In the mvneta driver, this leads to a warning about an unused variable
when we lookup the NAPI struct of another CPU and then don't use it:

ethernet/marvell/mvneta.c: In function 'mvneta_percpu_notifier':
ethernet/marvell/mvneta.c:2910:30: error: unused variable 'other_port' [-Werror=unused-variable]

There are no other CPUs on a UP build, so that code never runs, but
gcc does not know this.

The nicest solution seems to be to turn the napi_synchronize() helper
into an inline function for the UP case as well, as that leads gcc to
not complain about the argument being unused. Once we do that, we can
also combine the two cases into a single function definition and use
if(IS_ENABLED()) rather than #ifdef to make it look a bit nicer.

The warning first came up in linux-4.4, but I failed to catch it
earlier.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f86428854480 ("net: mvneta: Statically assign queues to CPUs")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kconfig: tinyconfig: provide whole choice blocks to avoid warnings

commit 236dec051078a8691950f56949612b4b74107e48 upstream.

Using "make tinyconfig" produces a couple of annoying warnings that show
up for build test machines all the time:

    .config:966:warning: override: NOHIGHMEM changes choice state
    .config:965:warning: override: SLOB changes choice state
    .config:963:warning: override: KERNEL_XZ changes choice state
    .config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
    .config:933:warning: override: SLOB changes choice state
    .config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
    .config:870:warning: override: SLOB changes choice state
    .config:868:warning: override: KERNEL_XZ changes choice state
    .config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state

I've made a previous attempt at fixing them and we discussed a number of
alternatives.

I tried changing the Makefile to use "merge_config.sh -n
$(fragment-list)" but couldn't get that to work properly.

This is yet another approach, based on the observation that we do want
to see a warning for conflicting 'choice' options, and that we can
simply make them non-conflicting by listing all other options as
disabled.  This is a trivial patch that we can apply independent of
plans for other changes.

Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de
Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.log
https://patchwork.kernel.org/patch/9212749/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom/spm: shut up uninitialized variable warning

commit 00affcac69c7aae6c2cfcbc71f724e1c16d0b445 upstream.

gcc warns about the 'found' variable possibly being used uninitialized:

drivers/soc/qcom/spm.c: In function 'spm_dev_probe':
drivers/soc/qcom/spm.c:305:5: error: 'found' may be used uninitialized in this function [-Werror=maybe-uninitialized]

However, the code is correct because we know that there is
always at least one online CPU. This initializes the 'found'
variable to zero before the loop so the compiler knows
it does not have to warn about it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: at91-pio4: use %pr format string for resource

commit 32844138e31347fc0f61d3bf2d7b9c4583f189e3 upstream.

resource_size_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as gcc correctly
warns:

pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
   dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);

This changes the format string to use the special "%pr" format
string that prints a resource, and changes the arguments so we
the resource structure directly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: dw_mmc: use resource_size_t to store physical address

commit 260b31643691e8a58683a4ccc3bdf7abfd86f54a upstream.

The dw_mmc driver stores the physical address of the MMIO registers
in a pointer, which requires the use of type casts, and is actually
broken if anyone ever has this device on a 32-bit SoC in registers
above 4GB. Gcc warns about this possibility when the driver is built
with ARM LPAE enabled:

mmc/host/dw_mmc.c: In function 'dw_mci_edmac_start_dma':
mmc/host/dw_mmc.c:702:17: warning: cast from pointer to integer of different size
  cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
                 ^
mmc/host/dw_mmc-pltfm.c: In function 'dw_mci_pltfm_register':
mmc/host/dw_mmc-pltfm.c:63:19: warning: cast to pointer from integer of different size
  host->phy_regs = (void *)(regs->start);

This changes the code to use resource_size_t, which gets rid of the
warning, the bug and the useless casts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid pointer arithmetic in calculating plane surface offset

commit 44eb0cb9620c6a53ec8e7073262e2af8079b727f upstream.

VMA offsets are 64 bits. Plane surface offsets are in ggtt and
the hardware register to set this is thus 32 bits. Be explicit
about these and convert carefully to from vma to final size.

This will make sparse happy by not creating 32bit pointers out
of 64bit vma offsets.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446204375-29831-1-git-send-email-mika.kuoppala@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpssd: fix buffer overflow warning

commit 3610a2add39365a0f153154c60169a66c616d50f upstream.

The compilation emits a warning in function ‘snprintf’,
    inlined from ‘set_cmdline’ at
    ../Documentation/mic/mpssd/mpssd.c:1541:9:
/usr/include/x86_64-linux-gnu/bits/stdio2.h:64:10:
    warning: call to __builtin___snprintf_chk will always overflow
    destination buffer

This was introduced in commit f4a66c204482 ("misc: mic: Update MIC host
daemon with COSM changes") and is fixed by reverting the changes to the
size argument of these snprintf statements.

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Danese <mikedanese@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gma500: remove annoying deprecation warning

commit 166c5a6ef765653848161e6f4af81c05e4b3ecf6 upstream.

In commit e45708976aea ("drm/dp-helper: Move the legacy helpers to
gma500") the legacy i2c helpers were moved to the only remaining user of
them, the gma500 driver.  Together with that move, i2c_dp_aux_add_bus()
was marked deprecated and started warning about its remaining use.

It's now been a year and a half of annoying warning, and apparently
nobody cares enough about gma500 to try to move it along to the more
modern models.

Get rid of the warning - if even the gma500 people don't care enough,
then they should certainly not spam other innocent developers with a
warning that might hide other, much more real issues.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: addrconf: fix dev refcont leak when DAD failed

commit 751eb6b6042a596b0080967c1a529a9fe98dac1d upstream.

In general, when DAD detected IPv6 duplicate address, ifp->state
will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a
delayed work, the call tree should be like this:

ndisc_recv_ns
  -> addrconf_dad_failure        <- missing ifp put
     -> addrconf_mod_dad_work
       -> schedule addrconf_dad_work()
         -> addrconf_dad_stop()  <- missing ifp hold before call it

addrconf_dad_failure() called with ifp refcont holding but not put.
addrconf_dad_work() call addrconf_dad_stop() without extra holding
refcount. This will not cause any issue normally.

But the race between addrconf_dad_failure() and addrconf_dad_work()
may cause ifp refcount leak and netdevice can not be unregister,
dmesg show the following messages:

IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected!
...
unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Fixes: c15b1ccadb32 ("ipv6: move DAD and addrconf_verify processing
to workqueue")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/core: Fix a race between try_to_wake_up() and a woken up task

commit 135e8c9250dd5c8c9aae5984fde6f230d0cbfeaf upstream.

The origin of the issue I've seen is related to
a missing memory barrier between check for task->state and
the check for task->on_rq.

The task being woken up is already awake from a schedule()
and is doing the following:

do {
schedule()
set_current_state(TASK_(UN)INTERRUPTIBLE);
} while (!cond);

The waker, actually gets stuck doing the following in
try_to_wake_up():

while (p->on_cpu)
cpu_relax();

Analysis:

The instance I've seen involves the following race:

 CPU1 CPU2

 while () {
   if (cond)
     break;
   do {
     schedule();
     set_current_state(TASK_UN..)
   } while (!cond);
wakeup_routine()
  spin_lock_irqsave(wait_lock)
   raw_spin_lock_irqsave(wait_lock)   wake_up_process()
 }   try_to_wake_up()
 set_current_state(TASK_RUNNING);   ..
 list_del(&waiter.list);

CPU2 wakes up CPU1, but before it can get the wait_lock and set
current state to TASK_RUNNING the following occurs:

 CPU3
 wakeup_routine()
 raw_spin_lock_irqsave(wait_lock)
 if (!list_empty)
   wake_up_process()
   try_to_wake_up()
   raw_spin_lock_irqsave(p->pi_lock)
   ..
   if (p->on_rq && ttwu_wakeup())
   ..
   while (p->on_cpu)
     cpu_relax()
   ..

CPU3 tries to wake up the task on CPU1 again since it finds
it on the wait_queue, CPU1 is spinning on wait_lock, but immediately
after CPU2, CPU3 got it.

CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and
the task is spinning on the wait_lock. Interestingly since p->on_rq
is checked under pi_lock, I've noticed that try_to_wake_up() finds
p->on_rq to be 0. This was the most confusing bit of the analysis,
but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq
check is not reliable without this fix IMHO. The race is visible
(based on the analysis) only when ttwu_queue() does a remote wakeup
via ttwu_queue_remote. In which case the p->on_rq change is not
done uder the pi_lock.

The result is that after a while the entire system locks up on
the raw_spin_irqlock_save(wait_lock) and the holder spins infintely

Reproduction of the issue:

The issue can be reproduced after a long run on my system with 80
threads and having to tweak available memory to very low and running
memory stress-ng mmapfork test. It usually takes a long time to
reproduce. I am trying to work on a test case that can reproduce
the issue faster, but thats work in progress. I am still testing the
changes on my still in a loop and the tests seem OK thus far.

Big thanks to Benjamin and Nick for helping debug this as well.
Ben helped catch the missing barrier, Nick caught every missing
bit in my theory.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[ Updated comment to clarify matching barriers. Many
  architectures do not have a full barrier in switch_to()
  so that cannot be relied upon. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <nicholas.piggin@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel"

commit 4d0bd46a4d55383f7b925e6cf7865a77e0f0e020 upstream.

This reverts commit 3d5fdff46c4b2b9534fa2f9fc78e90a48e0ff724.

Ben Hutchings pointed out that the commit isn't safe since it assumes
that the structure used by the driver is iw_point, when in fact there's
no way to know about that.

Fortunately, the only driver in the tree that ever runs this code path
is the wilc1000 staging driver, so it doesn't really matter.

Clearly I should have investigated this better before applying, sorry.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 3d5fdff46c4b ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: fix using sta->drv_priv before initializing it

commit 7711aaf08ad3fc4d0e937eec1de0a63620444ce7 upstream.

A station pointer can be passed to the driver on tx, before it has been
marked as associated. Since ath9k_sta_state was initializing the entry
too late, it resulted in some spurious crashes.

Fixes: df3c6eb34da5 ("ath9k: Use sta_state() callback")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md-cluster: make md-cluster also can work when compiled into kernel

commit 47a7b0d8888c04c9746812820b6e60553cc77bbc upstream.

The md-cluster is compiled as module by default,
if it is compiled by built-in way, then we can't
make md-cluster works.

[64782.630008] md/raid1:md127: active with 2 out of 2 mirrors
[64782.630528] md-cluster module not found.
[64782.630530] md127: Could not setup cluster service (-2)

Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions")
Reported-by: Marc Smith <marc.smith@mcc.edu>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix null pointer dereference in stop command timeout function

commit bcf42aa60c2832510b9be0f30c090bfd35bb172d upstream.

The stop endpoint command has its own 5 second timeout timer.
If the timeout function is triggered between USB3 and USB2 host
removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd)

the ->primary_hcd will be set to NULL at USB3 hcd removal.

Fix this by first checking if the PCI host is being removed, and
also by using only xhci_to_hcd() as it will always return the primary
hcd.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: direct-io: don't dirty ITER_BVEC pages

commit 8fba54aebbdf1f999738121922e74bf796ad60ee upstream.

When reading from a loop device backed by a fuse file it deadlocks on
lock_page().

This is because the page is already locked by the read() operation done on
the loop device.  In this case we don't want to either lock the page or
dirty it.

So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors.

Reported-by: Sheng Yang <sheng@yasker.org>
Fixes: aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Sheng Yang <sheng@yasker.org>
Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
Tested-by: Sheng Yang <sheng@yasker.org>
Tested-by: Ashish Samant <ashish.samant@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns

commit cbd60aa7cd17d81a434234268c55192862147439 upstream.

We use a btrfs_log_ctx structure to pass information into the
tree log commit, and get error values out.  It gets added to a per
log-transaction list which we walk when things go bad.

Commit d1433debe added an optimization to skip waiting for the log
commit, but didn't take root_log_ctx out of the list.  This
patch makes sure we remove things before exiting.

Signed-off-by: Chris Mason <clm@fb.com>
Fixes: d1433debe7f4346cf9fc0dafc71c3137d2a97bc4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: cryptd - initialize child shash_desc on import

commit 0bd2223594a4dcddc1e34b15774a3a4776f7749e upstream.

When calling .import() on a cryptd ahash_request, the structure members
that describe the child transform in the shash_desc need to be initialized
like they are when calling .init()

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb()

commit 872c63fbf9e153146b07f0cece4da0d70b283eeb upstream.

smp_mb__before_spinlock() is intended to upgrade a spin_lock() operation
to a full barrier, such that prior stores are ordered with respect to
loads and stores occuring inside the critical section.

Unfortunately, the core code defines the barrier as smp_wmb(), which
is insufficient to provide the required ordering guarantees when used in
conjunction with our load-acquire-based spinlock implementation.

This patch overrides the arm64 definition of smp_mb__before_spinlock()
to map to a full smp_mb().

Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33

commit 486095fae3a8a6b1ae07c51844699d9bd5cfbebc upstream.

PG8, PG9 is said to be the CTS/RTS pins for UART1 according to the A23/33
datasheets. However, the function is wrongly named "uart2" in the pinctrl
driver. This patch fixes this by modifying them to be named "uart1".

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: pistachio: fix mfio pll_lock pinmux

commit a32ac2912f97d7ea9b67eb67bb4aa30b9156a88e upstream.

A previous patch attempted to fix the pinmuxes for mfio 84 - 89, but it
omitted a change to pistachio_pin_group pistachio_groups, which results
in incorrect pll_lock signals being routed.

Apply the correct mux settings throughout the driver.

fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver")
fixes: e9adb336d0bf ("pinctrl: pistachio: fix mfio84-89 function description and pinmux.")
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Sifan Naeem <Sifan.Naeem@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: fix error with too large bios

commit 4e870e948fbabf62b78e8410f04c67703e7c816b upstream.

When dm-crypt processes writes, it allocates a new bio in
crypt_alloc_buffer().  The bio is allocated from a bio set and it can
have at most BIO_MAX_PAGES vector entries, however the incoming bio can be
larger (e.g. if it was allocated by bcache).  If the incoming bio is
larger, bio_alloc_bioset() fails and an error is returned.

To avoid the error, we test for a too large bio in the function
crypt_map() and use dm_accept_partial_bio() to split the bio.
dm_accept_partial_bio() trims the current bio to the desired size and
asks DM core to send another bio with the rest of the data.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm log writes: move IO accounting earlier to fix error path

commit a5d60783df61fbb67b7596b8a0f6b4b2e05251d5 upstream.

Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to
fix a bug that the target hangs if bio_alloc() fails.  The error path
does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before
invoking the error path to avoid underflow of lc->io_blocks.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm log writes: fix check of kthread_run() return value

commit 91e630d9ae6de6f740ef7c8176736eb55366833e upstream.

The kthread_run() function returns either a valid task_struct or
ERR_PTR() value, check for NULL is invalid.  This change fixes potential
for oops, e.g. in OOM situation.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: Fix XP watchpoint settings bitmask

commit b928466b2169e061822daad48ecf55b005445547 upstream.

The code setting XP watchpoint comparator and mask registers should, in
order to be fully compliant with specification, zero one or more most
significant bits of each field. In both L cases it means zeroing bit 63.
The bitmask doing this was wrong, though, zeroing bit 60 instead.
Fortunately, due to a lucky coincidence, this turned out to be fairly
innocent with the existing hardware.

Fixed now.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: Do not attempt to configure XPs for cycle counter

commit b7c1beb278e8e3dc664ed3df3fc786db126120a9 upstream.

Fuzzing the CCN perf driver revealed a small but definitely dangerous
mistake in the event setup code. When a cycle counter is requested, the
driver should not reconfigure the events bus at all, otherwise it will
corrupt (in most but the simplest cases) its configuration and may end
up accessing XP array out of its bounds and corrupting control
registers.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: arm-ccn: Fix PMU handling of MN

commit 4e486cba285ff06a1f28f0fc2991dde1482d1dcf upstream.

The "Miscellaneous Node" fell through cracks of node initialisation,
as its ID is shared with HN-I.

This patch treats MN as a special case (which it is), adding separate
validation check for it and pre-defining the node ID in relevant events
descriptions. That way one can simply run:

# perf stat -a -e ccn/mn_ecbarrier/ <workload>

Additionally, direction in the MN pseudo-events XP watchpoint
definitions is corrected to be "TX" (1) as they are defined from the
crosspoint point of view (thus barriers are transmitted from XP to MN).

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI

commit 78567f135d9bbbaf4538f63656d3e4d957c35fe9 upstream.

The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs.  If these clocks aren't handled correctly by ST's SDHCI
driver MMC will break and the following output can be observed:

[   13.916949] mmc0: Timeout waiting for hardware interrupt.
[   13.922349] sdhci: =========== REGISTER DUMP (mmc0)===========
[   13.928175] sdhci: Sys addr: 0x00000000 | Version:  0x00001002
[   13.933999] sdhci: Blk size: 0x00007040 | Blk cnt:  0x00000001
[   13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013
[   13.945650] sdhci: Present:  0x1fff0206 | Host ctl: 0x00000011
[   13.951475] sdhci: Power:    0x0000000f | Blk gap:  0x00000080
[   13.957300] sdhci: Wake-up:  0x00000000 | Clock:    0x00003f07
[   13.963126] sdhci: Timeout:  0x00000004 | Int stat: 0x00000000
[   13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[   13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[   13.980602] sdhci: Caps:     0x21ed3281 | Caps_1:   0x00000000
[   13.986428] sdhci: Cmd:      0x0000063a | Max curr: 0x00000000
[   13.992252] sdhci: Host ctl2: 0x00000000
[   13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200
[   14.001990] sdhci: ===========================================
[   14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress.

Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: overo: fix gpmc nand on boards with ethernet

commit 153b58ea932b2d0642fa5cd41c93bb0555f3f09b upstream.

The gpmc ranges property for NAND at CS0 was being overridden by later
includes that defined gpmc ethernet nodes, effectively breaking NAND on
these systems:

omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property

Instead of redefining the NAND range in every such dtsi, define all
currently used ranges in omap3-overo-base.dtsi.

Fixes: 98ce6007efb4 ("ARM: dts: overo: Support PoP NAND")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: overo: fix gpmc nand cs0 range

commit 5e0568dfbfb8c13cdb69c9fd06d600593ad4b430 upstream.

The gpmc ranges property for NAND at CS0 has been broken since it was
first added.

This currently prevents the nand gpmc child node from being probed:

omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property

and consequently the NAND device from being registered.

Fixes: 98ce6007efb4 ("ARM: dts: overo: Support PoP NAND")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6qdl: Fix SPDIF regression

commit f065e9e4addd75c21bb976bb2558648bf4f61de6 upstream.

Commit 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif")
changed many more clocks than only the SPDIF core clock as stated in
the commit message.

The MLB clock has been added and this causes SPDIF regression as
reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240

The MX6Q Reference Manual does not mention that MLB is a clock related
to SPDIF, so change it back to a dummy clock to restore SPDIF
functionality.

Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131

Fixes: 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif")
Reported-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP3: hwmod data: Add sysc information for DSI

commit b46211d6dcfb81a8af66b8684a42d629183670d4 upstream.

Add missing sysconfig/sysstatus information
to OMAP3 hwmod. The information has been
checked against OMAP34xx and OMAP36xx TRM.

Without this change DSI block is not reset
during boot, which is required for working
Nokia N950 display.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: kirkwood: ib62x0: fix size of u-boot environment partition

commit a778937888867aac17a33887d1c429120790fbc2 upstream.

Commit 148c274ea644 ("ARM: kirkwood: ib62x0: add u-boot environment
partition") split the "u-boot" partition into "u-boot" and "u-boot
environment".  However, instead of the size of the environment, an offset
was given, resulting in overlapping partitions.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Fixes: 148c274ea644 ("ARM: kirkwood: ib62x0: add u-boot environment partition")
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Luka Perkov <luka@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx

commit 8aade778f787305fdbfd3c1d54e6b583601b5902 upstream.

i.MX6SX has bypass PMIC ready function, as this function
is normally NOT enabled on the board design, so we need
to bypass the PMIC ready pin check during DSM mode resume
flow, otherwise, the internal DSM resume logic will be
waiting for this signal to be ready forever and cause
resume fail.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes: ff843d621bfc ("ARM: imx: add suspend support for i.mx6sx")
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: imx6: add missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul

commit f5a49057c71433e35a4712ab8d8f00641b3e1ec0 upstream.

There is a missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul,
without it, the "standby" mode can't work well, the system can't be
resumed.

With this commit, the "standby" mode works well.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: Anson Huang <anson.huang@nxp.com>
Fixes: ee4a5f838c84 ("ARM: imx: add suspend/resume support for i.mx6ul")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: AM43XX: hwmod: Fix RSTST register offset for pruss

commit b00ccf5b684992829610d162e78a7836933a1b19 upstream.

pruss hwmod RSTST register wrongly points to PWRSTCTRL register in case of
am43xx. Fix the RSTST register offset value.

This can lead to setting of wrong power state values for PER domain.

Fixes: 1c7e224d ("ARM: OMAP2+: hwmod: AM335x: runtime register update")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset: make sure new tasks conform to the current config of the cpuset

commit 06f4e94898918bcad00cdd4d349313a439d6911e upstream.

A new task inherits cpus_allowed and mems_allowed masks from its parent,
but if someone changes cpuset's config by writing to cpuset.cpus/cpuset.mems
before this new task is inserted into the cgroup's task list, the new task
won't be updated accordingly.

Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: thunderx: Fix OOPs with ethtool --register-dump

commit 1423661fed2c40d6d71b5e2e3aa390f85157f9d5 upstream.

The ethtool_ops .get_regs function attempts to read the nonexistent
register NIC_QSET_SQ_0_7_CNM_CHG, which produces a "bus error" type
OOPs.

Fix by not attempting to read, and removing the definition of,
NIC_QSET_SQ_0_7_CNM_CHG.  A zero is written into the register dump to
keep the layout unchanged.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: change bInterval default to 10 ms

commit 08c5cd37480f59ea39682f4585d92269be6b1424 upstream.

Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before.  However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.

Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid.  It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below.  To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Wade Berrier <wberrier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)

commit 7e9d2850a8db4e0d85a20bb692198bf2cc4be3b7 upstream.

The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs.  If this clock isn't handled correctly by ST's EHCI/OHCI
drivers, their hub won't be found, the following error be shown and the
result will be non-working USB:

  [   97.221963] hub 2-1:1.0: hub_ext_port_status failed (err = -110)

Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase

commit 6f3c4fb6d05e63c9c6d8968302491c3a5457be61 upstream.

Problems with the signal integrity of the high speed USB data lines or
noise on reference ground lines can cause the i.MX6 USB controller to
violate USB specs and exhibit unexpected behavior.

It was observed that USBi_UI interrupts were triggered first and when
isr_setup_status_phase was called, ci->status was NULL, which lead to a
NULL pointer dereference kernel panic.

This patch fixes the kernel panic, emits a warning once and returns
-EPIPE to halt the device and let the host get stalled.
It also adds a comment to point people, who are experiencing this issue,
to their USB hardware design.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition

commit 519d8bd4b5d3d82c413eac5bb42b106bb4b9ec15 upstream.

The previous driver is possible to stop the transfer wrongly.
For example:
 1) An interrupt happens, but not BRDY interruption.
 2) Read INTSTS0. And than state->intsts0 is not set to BRDY.
 3) BRDY is set to 1 here.
 4) Read BRDYSTS.
 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly.

Remarks:
 - The INTSTS0.BRDY is read only.
  - If any bits of BRDYSTS are set to 1, the BRDY is set to 1.
  - If BRDYSTS is 0, the BRDY is set to 0.

So, this patch adds condition to avoid such situation. (And about
NRDYSTS, this is not used for now. But, avoiding any side effects,
this patch doesn't touch it.)

Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: simple: add support for another Infineon flashloader

commit f190fd92458da3e869b4e2c6289e2c617490ae53 upstream.

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit
flashing application.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: added acces i/o products quad and octal serial cards

commit c8d192428f52f244130b84650ad616df09f2b1e1 upstream.

Added devices ids for acces i/o products quad and octal serial cards
that make use of existing Pericom PI7C9X7954 and PI7C9X7958
configurations .

Signed-off-by: Jimi Damon <jdamon@accesio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_mid: fix divide error bug if baud rate is 0

commit 47b34d2ef266e2c283b514d65c8963c2ccd42474 upstream.

Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by
formula for Intel MID"), the 8250 driver crashes in the byt_set_termios()
function with a divide error. This is caused by the fact that a baud rate of 0
(B0) is not handled properly. Fix it by falling back to B9600 in this case.

Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com>
Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ensure ret is initialized to zero before entering do loop

commit 5dba4b14bafe801083d01e1f400816df7e5a8f2e upstream.

A recent fix to iio_buffer_read_first_n_outer removed ret from being set by
a return from wait_event_interruptible and also added a continue in a loop
which causes the variable ret to not be set when it reaches the end of the
loop.  Fix this by initializing ret to zero.

Also remove extraneous white space at the end of the loop.

Fixes: fcf68f3c0bb2a5 ("fix sched WARNING "do not call blocking ops when !TASK_RUNNING")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:core: fix IIO_VAL_FRACTIONAL sign handling

commit 171c0091837c81ed5c949fec6966bb5afff2d1cf upstream.

7985e7c100 ("iio: Introduce a new fractional value type") introduced a
new IIO_VAL_FRACTIONAL value type meant to represent rational type numbers
expressed by a numerator and denominator combination.

Formating of IIO_VAL_FRACTIONAL values relies upon do_div() usage. This
fails handling negative values properly since parameters are reevaluated
as unsigned values.
Fix this by using div_s64_rem() instead. Computed integer part will carry
properly signed value. Formatted fractional part will always be positive.

Fixes: 7985e7c100 ("iio: Introduce a new fractional value type")
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: kxsd9: Fix scaling bug

commit 307fe9dd11ae44d4f8881ee449a7cbac36e1f5de upstream.

All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.

However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:

$cat in_accel_scale
-1057462640.011978

Fix this by assigning zero to the integer part.

Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: fix pressure data output unit in hid-sensor-attributes

commit 36afb176d3c9580651d7f410ed7f000ec48b5137 upstream.

According to IIO ABI definition, IIO_PRESSURE data output unit is
kilopascal:
http://lxr.free-electrons.com/source/Documentation/ABI/testing/sysfs-bus-iio

This patch fix output unit of HID pressure sensor IIO driver from pascal to
kilopascal to follow IIO ABI definition.

Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: bmc150: reset chip at init time

commit 1c500840934a138bd6b13556c210516e9301fbee upstream.

In at least one known setup, the chip comes up in a state where reading
the chip ID returns garbage unless it's been reset, due to noise on the
wires during system boot.

All supported chips have the same reset method, and based on the
datasheets they all need 1.3 or 1.8ms to recover after reset. So, do
the conservative thing here and always reset the chip.

Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91: unbreak channel adc channel 3

commit c2ab447454d498e709d9011c0f2d2945ee321f9b upstream.

The driver always assumes that an input device has been created when
reading channel 3. This causes a kernel panic when dereferencing
st->ts_input.

The change was introduced in
commit 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens
without TSMR"). Earlier versions only entered that part of the if-else
statement if only the following flags are set:

AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY

Signed-off-by: Anders Darander <anders@chargestorm.se>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999

commit 7d3cc21dab5313a02f2f3ca8164529b828a030d1 upstream.

The data buffer for captured mode for the ad799x driver is allocated in the
update_scan_mode() callback. This callback is not set in the iio_info
struct for the ad7791/ad7995/ad7999, which means that the data buffer is
not allocated when a captured transfer is started. As a result the driver
crashes when the first sample is received. To fix this properly set the
update_scan_mode() callback.

Fixes: d8dca33027c1 ("staging:iio:ad799x: Preallocate sample buffer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample

commit 7175cce1c3f1d8c8840d2004f78f96a3904249b5 upstream.

Now that open delay and sample delay for each channel is configurable
via DT, the default IDLE_TIMEOUT value is not enough as this is
calculated based on hardcoded macros. This results in driver returning
EBUSY sometimes. Fix this by increasing the timeout
value based on maximum value possible to open delay and sample delays
for each channel.

Fixes: 5dc11e810676e ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access

commit 90c43ec6997a892448f1f86180a515f59cafd8a3 upstream.

It is possible that two or more ADC channels can be simultaneously
requested for raw samples, in which case there can be race in access to
FIFO data resulting in loss of samples.
If am335x_tsc_se_set_once() is called again from tiadc_read_raw(), when
ADC is still acquired to sample one of the channels, the second process
might be put into uninterruptible sleep state. Fix these issues, by
protecting FIFO access and channel configurations with a mutex. Since
tiadc_read_raw() might take anywhere between few microseconds to few
milliseconds to finish execution (depending on averaging and delay
values supplied via DT), its better to use mutex instead of spinlock.

Fixes: 7ca6740cd1cd4 ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: rockchip_saradc: reset saradc controller before programming it

commit 543852af8e5902aee8f7c72c89e1513663e0f696 upstream.

SARADC controller needs to be reset before programming it, otherwise
it will not function properly.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: as3935: set up buffer timestamps for non-zero values

commit f8adf645db03345af2d9a8b6095b02327ea50885 upstream.

Use the iio_pollfunc_store_time parameter during triggered buffer
set-up to get valid timestamps.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: kxsd9: Fix raw read return

commit 7ac61a062f3147dc23e3f12b9dfe7c4dd35f9cb8 upstream.

Any readings from the raw interface of the KXSD9 driver will
return an empty string, because it does not return
IIO_VAL_INT but rather some random value from the accelerometer
to the caller.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm-arm: Unmap shadow pagetables properly

commit 293f293637b55db4f9f522a5a72514e98a541076 upstream.

On arm/arm64, we depend on the kvm_unmap_hva* callbacks (via
mmu_notifiers::invalidate_*) to unmap the stage2 pagetables when
the userspace buffer gets unmapped. However, when the Hypervisor
process exits without explicit unmap of the guest buffers, the only
notifier we get is kvm_arch_flush_shadow_all() (via mmu_notifier::release
) which does nothing on arm. Later this causes us to access pages that
were already released [via exit_mmap() -> unmap_vmas()] when we actually
get to unmap the stage2 pagetable [via kvm_arch_destroy_vm() ->
kvm_free_stage2_pgd()]. This triggers crashes with CONFIG_DEBUG_PAGEALLOC,
which unmaps any free'd pages from the linear map.

 [  757.644120] Unable to handle kernel paging request at virtual address
  ffff800661e00000
 [  757.652046] pgd = ffff20000b1a2000
 [  757.655471] [ffff800661e00000] *pgd=00000047fffe3003, *pud=00000047fcd8c003,
  *pmd=00000047fcc7c003, *pte=00e8004661e00712
 [  757.666492] Internal error: Oops: 96000147 [#3] PREEMPT SMP
 [  757.672041] Modules linked in:
 [  757.675100] CPU: 7 PID: 3630 Comm: qemu-system-aar Tainted: G      D
 4.8.0-rc1 #3
 [  757.683240] Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board,
  BIOS 3.06.15 Aug 19 2016
 [  757.692938] task: ffff80069cdd3580 task.stack: ffff8006adb7c000
 [  757.698840] PC is at __flush_dcache_area+0x1c/0x40
 [  757.703613] LR is at kvm_flush_dcache_pmd+0x60/0x70
 [  757.708469] pc : [<ffff20000809dbdc>] lr : [<ffff2000080b4a70>] pstate: 20000145
 ...
 [  758.357249] [<ffff20000809dbdc>] __flush_dcache_area+0x1c/0x40
 [  758.363059] [<ffff2000080b6748>] unmap_stage2_range+0x458/0x5f0
 [  758.368954] [<ffff2000080b708c>] kvm_free_stage2_pgd+0x34/0x60
 [  758.374761] [<ffff2000080b2280>] kvm_arch_destroy_vm+0x20/0x68
 [  758.380570] [<ffff2000080aa330>] kvm_put_kvm+0x210/0x358
 [  758.385860] [<ffff2000080aa524>] kvm_vm_release+0x2c/0x40
 [  758.391239] [<ffff2000082ad234>] __fput+0x114/0x2e8
 [  758.396096] [<ffff2000082ad46c>] ____fput+0xc/0x18
 [  758.400869] [<ffff200008104658>] task_work_run+0x108/0x138
 [  758.406332] [<ffff2000080dc8ec>] do_exit+0x48c/0x10e8
 [  758.411363] [<ffff2000080dd5fc>] do_group_exit+0x6c/0x130
 [  758.416739] [<ffff2000080ed924>] get_signal+0x284/0xa18
 [  758.421943] [<ffff20000808a098>] do_signal+0x158/0x860
 [  758.427060] [<ffff20000808aad4>] do_notify_resume+0x6c/0x88
 [  758.432608] [<ffff200008083624>] work_pending+0x10/0x14
 [  758.437812] Code: 9ac32042 8b010001 d1000443 8a230000 (d50b7e20)

This patch fixes the issue by moving the kvm_free_stage2_pgd() to
kvm_arch_flush_shadow_all().

Tested-by: Itaru Kitayama <itaru.kitayama@riken.jp>
Reported-by: Itaru Kitayama <itaru.kitayama@riken.jp>
Reported-by: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/AMD: Apply erratum 665 on machines without a BIOS fix

commit d1992996753132e2dafe955cccb2fb0714d3cfc4 upstream.

AMD F12h machines have an erratum which can cause DIV/IDIV to behave
unpredictably. The workaround is to set MSRC001_1029[31] but sometimes
there is no BIOS update containing that workaround so let's do it
ourselves unconditionally. It is simple enough.

[ Borislav: Wrote commit message. ]

Signed-off-by: Emanuel Czirai <icanrealizeum@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yaowu Xu <yaowu@google.com>
Link: http://lkml.kernel.org/r/20160902053550.18097-1-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/paravirt: Do not trace _paravirt_ident_*() functions

commit 15301a570754c7af60335d094dd2d1808b0641a5 upstream.

Łukasz Daniluk reported that on a RHEL kernel that his machine would lock up
after enabling function tracer. I asked him to bisect the functions within
available_filter_functions, which he did and it came down to three:

  _paravirt_nop(), _paravirt_ident_32() and _paravirt_ident_64()

It was found that this is only an issue when noreplace-paravirt is added
to the kernel command line.

This means that those functions are most likely called within critical
sections of the funtion tracer, and must not be traced.

In newer kenels _paravirt_nop() is defined within gcc asm(), and is no
longer an issue.  But both _paravirt_ident_{32,64}() causes the
following splat when they are traced:

 mm/pgtable-generic.c:33: bad pmd ffff8800d2435150(0000000001d00054)
 mm/pgtable-generic.c:33: bad pmd ffff8800d3624190(0000000001d00070)
 mm/pgtable-generic.c:33: bad pmd ffff8800d36a5110(0000000001d00054)
 mm/pgtable-generic.c:33: bad pmd ffff880118eb1450(0000000001d00054)
 NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [systemd-journal:469]
 Modules linked in: e1000e
 CPU: 2 PID: 469 Comm: systemd-journal Not tainted 4.6.0-rc4-test+ #513
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 task: ffff880118f740c0 ti: ffff8800d4aec000 task.ti: ffff8800d4aec000
 RIP: 0010:[<ffffffff81134148>]  [<ffffffff81134148>] queued_spin_lock_slowpath+0x118/0x1a0
 RSP: 0018:ffff8800d4aefb90  EFLAGS: 00000246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011eb16d40
 RDX: ffffffff82485760 RSI: 000000001f288820 RDI: ffffea0000008030
 RBP: ffff8800d4aefb90 R08: 00000000000c0000 R09: 0000000000000000
 R10: ffffffff821c8e0e R11: 0000000000000000 R12: ffff880000200fb8
 R13: 00007f7a4e3f7000 R14: ffffea000303f600 R15: ffff8800d4b562e0
 FS:  00007f7a4e3d7840(0000) GS:ffff88011eb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f7a4e3f7000 CR3: 00000000d3e71000 CR4: 00000000001406e0
 Call Trace:
   _raw_spin_lock+0x27/0x30
   handle_pte_fault+0x13db/0x16b0
   handle_mm_fault+0x312/0x670
   __do_page_fault+0x1b1/0x4e0
   do_page_fault+0x22/0x30
   page_fault+0x28/0x30
   __vfs_read+0x28/0xe0
   vfs_read+0x86/0x130
   SyS_read+0x46/0xa0
   entry_SYSCALL_64_fastpath+0x1e/0xa8
 Code: 12 48 c1 ea 0c 83 e8 01 83 e2 30 48 98 48 81 c2 40 6d 01 00 48 03 14 c5 80 6a 5d 82 48 89 0a 8b 41 08 85 c0 75 09 f3 90 8b 41 08 <85> c0 74 f7 4c 8b 09 4d 85 c9 74 08 41 0f 18 09 eb 02 f3 90 8b

Reported-by: Łukasz Daniluk <lukasz.daniluk@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS

commit 1c3c909303924d30145601f47b6c058fdd2cbc2e upstream.

|  CC      mm/memory.o
| In file included from ../mm/memory.c:53:0:
| ../include/linux/pfn_t.h: In function ‘pfn_t_pte’:
| ../include/linux/pfn_t.h:78:2: error: conversion to non-scalar type requested
|  return pfn_pte(pfn_t_to_pfn(pfn), pgprot);

With STRICT_MM_TYPECHECKS pte_t is a struct and the offending code
forces a cast which ends up shifting a struct and hence the gcc warning.

Note that in recent past some of the arches (aarch64, s390) made
STRICT_MM_TYPECHECKS default, but we don't for ARC as this leads to slightly
worse generated code, given ARC ABI definition of returning structs
(which pte_t would become)

Quoting from ARC ABI...

  "Results of type struct are returned in a caller-supplied temporary
  variable whose address is passed in r0.
  For such functions, the arguments are shifted so that they are
  passed in r1 and up."

So
 - struct to be returned would be allocated on stack requiring extra
   code at call sites
 - callee updates stack memory to facilitate the return (vs. simple
   MOV into return reg r0)

Hence STRICT_MM_TYPECHECKS is not enabled by default for ARC

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/uverbs: Fix race between uverbs_close and remove_one

commit d1e09f304a1d9651c5059ebfeb696dc2effc9b32 upstream.

Fixes an oops that might happen if uverbs_close races with
remove_one.

Both contexts may run ib_uverbs_cleanup_ucontext, it depends
on the flow.

Currently, there is no protection for a case that remove_one
didn't make the cleanup it runs to its end, the underlying
ib_device was freed then uverbs_close will call
ib_uverbs_cleanup_ucontext and OOPs.

Above might happen if uverbs_close deleted the file from the list
then remove_one didn't find it and runs to its end.

Fixes to protect against that case by a new cleanup lock so that
ib_uverbs_cleanup_ucontext will be called always before that
remove_one is ended.

Fixes: 35d4a0b63dc0 ("IB/uverbs: Fix race between ib_uverbs_open and remove_one")
Reported-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm flakey: fix reads to be issued if drop_writes configured

commit 299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc upstream.

v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.

Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix exe_file access in audit_exe_compare

commit 5efc244346f9f338765da3d592f7947b0afdc4b5 upstream.

Prior to the change the function would blindly deference mm, exe_file
and exe_file->f_inode, each of which could have been NULL or freed.

Use get_task_exe_file to safely obtain stable exe_file.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: introduce get_task_exe_file

commit cd81a9170e69e018bbaba547c1fd85a585f5697a upstream.

For more convenient access if one has a pointer to the task.

As a minor nit take advantage of the fact that only task lock + rcu are
needed to safely grab ->exe_file. This saves mm refcount dance.

Use the helper in proc_exe_link.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kexec: fix double-free when failing to relocate the purgatory

commit 070c43eea5043e950daa423707ae3c77e2f48edb upstream.

If kexec_apply_relocations fails, kexec_load_purgatory frees pi->sechdrs
and pi->purgatory_buf.  This is redundant, because in case of error
kimage_file_prepare_segments calls kimage_file_post_load_cleanup, which
will also free those buffers.

This causes two warnings like the following, one for pi->sechdrs and the
other for pi->purgatory_buf:

  kexec-bzImage64: Loading purgatory failed
  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 2119 at mm/vmalloc.c:1490 __vunmap+0xc1/0xd0
  Trying to vfree() nonexistent vm area (ffffc90000e91000)
  Modules linked in:
  CPU: 1 PID: 2119 Comm: kexec Not tainted 4.8.0-rc3+ #5
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x4d/0x65
    __warn+0xcb/0xf0
    warn_slowpath_fmt+0x4f/0x60
    ? find_vmap_area+0x19/0x70
    ? kimage_file_post_load_cleanup+0x47/0xb0
    __vunmap+0xc1/0xd0
    vfree+0x2e/0x70
    kimage_file_post_load_cleanup+0x5e/0xb0
    SyS_kexec_file_load+0x448/0x680
    ? putname+0x54/0x60
    ? do_sys_open+0x190/0x1f0
    entry_SYSCALL_64_fastpath+0x13/0x8f
  ---[ end trace 158bb74f5950ca2b ]---

Fix by setting pi->sechdrs an pi->purgatory_buf to NULL, since vfree
won't try to free a NULL pointer.

Link: http://lkml.kernel.org/r/1472083546-23683-1-git-send-email-bauerman@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: Fix the CREATE_SESSION slot number accounting

commit b519d408ea32040b1c7e10b155a3ee9a36660947 upstream.

Ensure that we conform to the algorithm described in RFC5661, section
18.36.4 for when to bump the sequence id. In essence we do it for all
cases except when the RPC call timed out, or in case of the server returning
NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised

commit bf0291dd2267a2b9a4cd74d65249553d11bb45d6 upstream.

According to RFC5661, the client is responsible for serialising
LAYOUTGET and LAYOUTRETURN to avoid ambiguity. Consider the case
where we send both in parallel.

Client Server
====== ======
LAYOUTGET(seqid=X)
LAYOUTRETURN(seqid=X)
LAYOUTGET return seqid=X+1
LAYOUTRETURN return seqid=X+2
Process LAYOUTRETURN
          Forget layout stateid
Process LAYOUTGET
          Set seqid=X+1

The client processes the layoutget/layoutreturn in the wrong order,
and since the result of the layoutreturn was to clear the only
existing layout segment, the client forgets the layout stateid.

When the LAYOUTGET comes in, it is treated as having a completely
new stateid, and so the client sets the wrong sequence id...

Fix is to check if there are outstanding LAYOUTGET requests
before we send the LAYOUTRETURN (note that LAYOUGET will already
wait if it sees an outstanding LAYOUTRETURN).

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock

commit 885848186fbc2d1d8fb6d2fdc2156638ae289a46 upstream.

nfsd4_release_lockowner finds a lock owner that has no lock state,
and drops cl_lock. Then release_lockowner picks up cl_lock and
unhashes the lock owner.

During the window where cl_lock is dropped, I don't see anything
preventing a concurrent nfsd4_lock from finding that same lock owner
and adding lock state to it.

Move release_lockowner() into nfsd4_release_lockowner and hang onto
the cl_lock until after the lock owner's state cannot be found
again.

Found by inspection, we don't currently have a reproducer.

Fixes: 2c41beb0e5cf ("nfsd: reduce cl_lock thrashing in ... ")
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.x: Fix a refcount leak in nfs_callback_up_net

commit 98b0f80c2396224bbbed81792b526e6c72ba9efa upstream.

On error, the callers expect us to return without bumping
nn->cb_users[].

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS: The client must not do I/O to the DS if it's lease has expired

commit b88fa69eaa8649f11828158c7b65c4bcd886ebd5 upstream.

Ensure that the client conforms to the normative behaviour described in
RFC5661 Section 12.7.2: "If a client believes its lease has expired,
it MUST NOT send I/O to the storage device until it has validated its
lease."

So ensure that we wait for the lease to be validated before using
the layout.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: don't depend on d_find_any_alias() when generating notifications

commit df6a58c5c5aa8ecb1e088ecead3fa33ae70181f1 upstream.

kernfs_notify_workfn() sends out file modified events for the
scheduled kernfs_nodes.  Because the modifications aren't from
userland, it doesn't have the matching file struct at hand and can't
use fsnotify_modify().  Instead, it looked up the inode and then used
d_find_any_alias() to find the dentry and used fsnotify_parent() and
fsnotify() directly to generate notifications.

The assumption was that the relevant dentries would have been pinned
if there are listeners, which isn't true as inotify doesn't pin
dentries at all and watching the parent doesn't pin the child dentries
even for dnotify.  This led to, for example, inotify watchers not
getting notifications if the system is under memory pressure and the
matching dentries got reclaimed.  It can also be triggered through
/proc/sys/vm/drop_caches or a remount attempt which involves shrinking
dcache.

fsnotify_parent() only uses the dentry to access the parent inode,
which kernfs can do easily.  Update kernfs_notify_workfn() so that it
uses fsnotify() directly for both the parent and target inodes without
going through d_find_any_alias().  While at it, supply the target file
name to fsnotify() from kernfs_node->name.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Fixes: d911d9874801 ("kernfs: make kernfs_notify() trigger inotify events too")
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET

commit f077aaf0754bcba0fffdbd925bc12f09cd1e38aa upstream.

In commit c60ac5693c47 ("powerpc: Update kernel VSID range", 2013-03-13)
we lost a check on the region number (the top four bits of the effective
address) for addresses below PAGE_OFFSET.  That commit replaced a check
that the top 18 bits were all zero with a check that bits 46 - 59 were
zero (performed for all addresses, not just user addresses).

This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx
and we will insert a valid SLB entry for it.  The VSID used will be the
same as if the top 4 bits were 0, but the page size will be some random
value obtained by indexing beyond the end of the mm_ctx_high_slices_psize
array in the paca.  If that page size is the same as would be used for
region 0, then userspace just has an alias of the region 0 space.  If the
page size is different, then no HPTE will be found for the access, and
the process will get a SIGSEGV (since hash_page_mm() will refuse to create
a HPTE for the bogus address).

The access beyond the end of the mm_ctx_high_slices_psize can be at most
5.5MB past the array, and so will be in RAM somewhere.  Since the access
is a load performed in real mode, it won't fault or crash the kernel.
At most this bug could perhaps leak a little bit of information about
blocks of 32 bytes of memory located at offsets of i * 512kB past the
paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11.

Fixes: c60ac5693c47 ("powerpc: Update kernel VSID range")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv : Drop reference added by kset_find_obj()

commit a9cbf0b2195b695cbeeeecaa4e2770948c212e9a upstream.

In a situation, where Linux kernel gets notified about duplicate error log
from OPAL, it is been observed that kernel fails to remove sysfs entries
(/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because,
we currently search the error log/dump kobject in the kset list via
'kset_find_obj()' routine. Which eventually increment the reference count
by one, once it founds the kobject.

So, unless we decrement the reference count by one after it found the kobject,
we would not be able to release the kobject properly later.

This patch adds the 'kobject_put()' which was missing earlier.

Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: do not use r13 for tabort_syscall

commit cc7786d3ee7e3c979799db834b528db2c0834c2e upstream.

tabort_syscall runs with RI=1, so a nested recoverable machine
check will load the paca into r13 and overwrite what we loaded
it with, because exceptions returning to privileged mode do not
restore r13.

Fixes: b4b56f9ecab4 (powerpc/tm: Abort syscalls in active transactions)
Signed-off-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: move linearization of buffers to generic code

commit c7cad0d6f70cd4ce8644ffe528a4df1cdc2e77f5 upstream.

In commit 5cbb28a4bf65c7e4 ("tipc: linearize arriving NAME_DISTR
and LINK_PROTO buffers") we added linearization of NAME_DISTRIBUTOR,
LINK_PROTOCOL/RESET and LINK_PROTOCOL/ACTIVATE to the function
tipc_udp_recv(). The location of the change was selected in order
to make the commit easily appliable to 'net' and 'stable'.

We now move this linearization to where it should be done, in the
functions tipc_named_rcv() and tipc_link_proto_rcv() respectively.

Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: put bio before return

commit 16c6d048d7b74249a4387700887e8adb13028866 upstream.

The bio is not returned if the data page cannot be allocated.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypto: require write access to mount to set encryption policy

commit ba63f23d69a3a10e7e527a02702023da68ef8a6d upstream.

Since setting an encryption policy requires writing metadata to the
filesystem, it should be guarded by mnt_want_write/mnt_drop_write.
Otherwise, a user could cause a write to a frozen or readonly
filesystem.  This was handled correctly by f2fs but not by ext4.  Make
fscrypt_process_policy() handle it rather than relying on the filesystem
to get it right.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs}
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "KVM: x86: fix missed hardware breakpoints"

[the change is part of 70e4da7a8ff62f2775337b705f45c804bb450454, which
is already in stable kernels 4.1.y to 4.4.y.  this part of the fix
however was later undone, so remove the line again]

The following patches were applied in the wrong order in -stable. This
is the order as they appear in Linus' tree,

 [0] commit 4e422bdd2f84 ("KVM: x86: fix missed hardware breakpoints")
 [1] commit 172b2386ed16 ("KVM: x86: fix missed hardware breakpoints")
 [2] commit 70e4da7a8ff6 ("KVM: x86: fix root cause for missed hardware breakpoints")

but this is the order for linux-4.4.y

 [1] commit fc90441e728a ("KVM: x86: fix missed hardware breakpoints")
 [2] commit 25e8618619a5 ("KVM: x86: fix root cause for missed hardware breakpoints")
 [0] commit 0f6e5e26e68f ("KVM: x86: fix missed hardware breakpoints")

The upshot is that KVM_DEBUGREG_RELOAD is always set when returning
from kvm_arch_vcpu_load() in stable, but not in Linus' tree.

This happened because [0] and [1] are the same patch.  [0] and [1] come from two
different merges, and the later merge is trivially resolved; when [2]
is applied it reverts both of them.  Instead, when using the [1][2][0]
order, patches applies normally but "KVM: x86: fix missed hardware
breakpoints" is present in the final tree.

Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: KVM: Check for pfn noslot case

commit ba913e4f72fc9cfd03dad968dfb110eb49211d80 upstream.

When mapping a page into the guest we error check using is_error_pfn(),
however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an
error HVA for the page. This can only happen on MIPS right now due to
unusual memslot management (e.g. being moved / removed / resized), or
with an Enhanced Virtual Memory (EVA) configuration where the default
KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed
in a later patch). This case will be treated as a pfn of zero, mapping
the first page of physical memory into the guest.

It would appear the MIPS KVM port wasn't updated prior to being merged
(in v3.10) to take commit 81c52c56e2b4 ("KVM: do not treat noslot pfn as
a error pfn") into account (merged v3.8), which converted a bunch of
is_error_pfn() calls to is_error_noslot_pfn(). Switch to using
is_error_noslot_pfn() instead to catch this case properly.

Fixes: 858dd5d45733 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[james.hogan@imgtec.com: Backport to v4.7.y]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function

commit b53e7d000d9e6e9fd2c6eb6b82d2783c67fd599e upstream.

The bootloader (U-boot) sometimes uses this timer for various delays.
It uses it as a ongoing counter, and does comparisons on the current
counter value. The timer counter is never stopped.

In some cases when the user interacts with the bootloader, or lets
it idle for some time before loading Linux, the timer may expire,
and an interrupt will be pending. This results in an unexpected
interrupt when the timer interrupt is enabled by the kernel, at
which point the event_handler isn't set yet. This results in a NULL
pointer dereference exception, panic, and no way to reboot.

Clear any pending interrupts after we stop the timer in the probe
function to avoid this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypto: add authorization check for setting encryption policy

commit 163ae1c6ad6299b19e22b4a35d5ab24a89791a98 upstream.

On an ext4 or f2fs filesystem with file encryption supported, a user
could set an encryption policy on any empty directory(*) to which they
had readonly access.  This is obviously problematic, since such a
directory might be owned by another user and the new encryption policy
would prevent that other user from creating files in their own directory
(for example).

Fix this by requiring inode_owner_or_capable() permission to set an
encryption policy.  This means that either the caller must own the file,
or the caller must have the capability CAP_FOWNER.

(*) Or also on any regular file, for f2fs v4.6 and later and ext4
    v4.8-rc1 and later; a separate bug fix is coming for that.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use __GFP_NOFAIL in ext4_free_blocks()

commit adb7ef600cc9d9d15ecc934cc26af5c1379777df upstream.

This might be unexpected but pages allocated for sbi->s_buddy_cache are
charged to current memory cgroup. So, GFP_NOFS allocation could fail if
current task has been killed by OOM or if current memory cgroup has no
free memory left. Block allocator cannot handle such failures here yet.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.21

lib/mpi: mpi_write_sgl(): fix skipping of leading zero limbs

commit f2d1362ff7d266b3d2b1c764d6c2ef4a3b457f23 upstream.

Currently, if the number of leading zeros is greater than fits into a
complete limb, mpi_write_sgl() skips them by iterating over them limb-wise.

However, it fails to adjust its internal leading zeros tracking variable,
lzeros, accordingly: it does a

  p -= sizeof(alimb);
  continue;

which should really have been a

  lzeros -= sizeof(alimb);
  continue;

Since lzeros never decreases if its initial value >= sizeof(alimb), nothing
gets copied by mpi_write_sgl() in that case.

Instead of skipping the high order zero limbs within the loop as shown
above, fix the issue by adjusting the copying loop's bounds.

Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>