staging: comedi: ni_stc.h: tidy up NI_M_AI_CFG_FIFO_DATA_REG bits

Rename all the CamelCase and convert the enum and helper functions
into defines. Use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: rename M_Offset_* symbols

Renamme these CamelCase symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: simplify MSeries_AI_Config_Bank_Bits()

Simplify this helper function by using a bit-shift to set the high
banks select bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: reg_type is not needed by MSeries_AI_Config_Bank_Bits()

This helper function sets the bits in the M_Offset_AI_Config_FIFO_Data register
to select the correct bank to configure a given analog output channel. The NI
M Series boards are defined by the boardinfo to have 16, 32, or 80 channels.
Only 2 of the M Series boards have 80 channels, those boards happen to have a
reg_type of ni_reg_622x.

The bank for the 16 and 32 channel boards is selected by the 'channel & 0x30'
calculation (comedi channels 0 to 15 or 31). This also selects the bank for the
first 64 channels of the 80 channel boards. The additional '|= 0x400' sets the
bank to access the extra channels (comedi channels >= 63).

Since all the non ni_reg_622x boards have at most 32 channels, the extra check
of the 'reg_type' is not required in this function. Remove it as well as the
parameter.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: tidy up M_Offset_* values

For aesthetics, define the M_Offset_* values instead of using an enum.

Convert the inline helpers used to get some of the M-Series register
offsets into macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: simplify ni_m_series_set_pfi_routing()

This function is overly complex due to the M_Offset_PFI_Output_Select()
helper using a 1 based index for the registers and the private data using
a 0 based index for the cached values.

Modify the M_Offset_PFI_Output_Select() helper to use a 0 based index and
remove the sanity check which can never happen. The 'n' value passed is
calculated from the subdevice channel which will always be in range.

Tidy up the function by using a local variable to mask/set the pfi output
select bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: open code the M-Series GPCT register offsets

Remove the enum m_series_register_offsets values that are only used in
the lookup tables for the GPCT to STC register mapping and just open
code the values. Having the extra level of indirection does not add any
additional clarity and it gets rid of some of the CamelCase symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: refactor gpct to stc register handling

The NI General Purpose Counter Timer (gpct) registers are mapped to the
STC registers with a big switch statement. Create a lookup table to handle
the mapping ot the registers. This is easier to maintain.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: open code the M-Series regmap offsets

Remove the enum m_series_register_offsets values that are only used in
the lookup tables for the STC to M-Series register mapping and just open
code the values. Having the extra level of indirection does not add any
additional clarity and it gets rid of some of the CamelCase symbols.

Some of the registers are not currently used by the driver so the mappings
were not present in the original switch code. Add the missing register
mappings to the lookup tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: refactor m-series stc register handling

For M-Series boards (devpriv->is_m_series), the STC registers need to be
remapped. This is currently handled with some big switch statements to
convert the STC register offset to the M-Series offset. Some of the
registers also need special handling due to differences in the register
size on the M-Series boards.

Create some lookup tables to handle the remapping of the read and write
registers. These are easier to maintain and can contain the register size
so that a common function can be used instead of the separate helpers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-v4.2a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, functionality and cleanups for the 4.2 cycle

New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.

New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.

Cleanups
* st sensors - more helpful error message if device id wrong or irq request
  fails, explicitly make the Block Data Update optional rather
  than relying on writes to address 0 not doing anything, make interrupt
  support optional (Not always wired, and not all devices actually have
  an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
  id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
  management, optimize power usage by powering down when possible, rename
  the gpio interrupt pin to be more useful, trivial return path simplification,
  trivial formatting fixes.
* isl29018 -  move towards ABI compliance with a view to moving this driver
  out of staging, add some brackets to ensure code works as expected.  Note
  there is no actual bug as the condition being tested is always true
  (with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
  fix a parameter sanity check that always fails (bug introduced
  earlier in this series), ACPI enumeration support,
  interrupt rate control support, interrupt support in general and
  integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
  after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
  add emissivity setting, add device tree binding documentation,
  fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.

staging: unisys: uislib.h: Remove unused cache allocation prototypes

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset: Remove unused cache allocator

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove wrapper around parser_init_guts()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: parser_init_guts(): standard_payload_header is always false

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: parser: Remove unused functions and mark others static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset: Declare parser_init_byte_stream() static

In addition remove unused parser_init()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel: Make visorchannel_create take a gfp_t

This allows the caller to specify an appropriate GFP flag instead of
hardcoding the lowest common denominator.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove visorutil from top level Makefile

The visorutil directory is still mentioned in the top level makefile for
the Unisys drivers, so remove it.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix visorbus Kconfig

Removing visorutil made it impossible to build visorbus. Remove the config
setting from the Kconfig so the module can be enabled in the build.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move periodic_work.c into the visorbus directory

This patch removes visorutil directory, move periodic_work.c into
the visorbus directory.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove timskmod.h and procobjecttree.h

This patch move the needed linux include files from timskmod.h
to the files that calls those include. Also procobjecttree.h is
removed since it is dead code.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove charqueue.c

This patch removes charqueue.[ch] since it no longer called

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move timskmod.h functionality

This patch removes all timksmod.h pound defines. It also removes
visorkmodutils.c since it no longer has any use by itself. Since
visorkmodutils.c is no longer needed the module_init for
visorchipset.c is modified to call visorutil_spar_detect directly
instead of the extern variable in timksmod.h.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: add ACPI and PCI requirement to Kconfig

Later patches will require PCI and ACPI support in the kernel, so add these
features to the Kconfig.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: add acpi pnp driver

According to Unisys, another OS detects the PNP0A07 as the auto load
device.  We can also do this in the linux kernel by simply converting the
driver over to the ACPI driver model.

Notes: This changes the usage of __init and it had to be removed from some
functions to avoid a !__init function calling an __init function.
Additionally I also cleaned up the headers in visorchipset.c since I was
adding a header file.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove BOOL,TRUE,FALSE definitions

These shouldn't be defined in the code and can be replaced with the
standard bool, true, and false usage that the kernel uses.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Finally remove the last remnants of memregion

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Eliminate visor_memregion_write()

visorchannel's signal code should call visorchannel_write() directly.
This is more consistent and cleaner, and allows us to remove the last
memregion call.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Eliminate visor_memregion_read()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_create_guts(): Use visorchannel_read()

There is no benefit to calling visor_memregion_read() at this point.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_write(): Handle partial channel_header writes

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_read(): Use memcpy_fromio() directly

Note, this changes the behavior of visorchannel_read(). The old code
would return the channel header, if the offset argument was 0, and the
caller tried to read beyond the size of the visorchannel. Note this
only worked for offset == 0, but not for
(offset > 0) && (offset < header_size), which was inconsistent.

The new implementation returns an error if someone tries to read
beyond the visorchannel size.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_write(): Use memcpy_toio() directly

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: {un, }mapit() are no longer used

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Eliminate visor_memregion_get_*() functions

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Eliminate visor_memregion_resize()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Eliminate visor_memregion_destroy()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Eliminate visor_memregion_create()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: get rid of serialloopbacktest

serialloopbacktest is no longer supported. Get rid of it.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: cleanup and align iochannel.h comments

This patch reorganizes, aligns, and corrects grammar mistakes on
comments.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused #define in iochannel.h

This patch simply remove all unused #define's in iochannel.h

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused chipset feature PCIVBUS

This patch removes unused chipset feature
ULTRA_CHIPSET_FEATURE_PCIVBUS

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused CONTROLVM_CHIPSET_SHUTDOWN

this patch removes unused chipset command on the guest
CONTROLVM_CHIPSET_SHUTDOWN

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused device_map and guest_devices struct

This patch removes unused struct in the controlvm_channel message
and replaces it with a char reserved inorder to mantain same
message size.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: controlvmchannel.h comment aligment and cleanup

This patch is a comment aligment and cleanup for
controlvmchannel.h.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: rename variable to reserverd since it is unused

This patch renames send_irq_handle to reserved1 since this variable
is unused in the guest side.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused CONTROL_VM messages from enum

This patch removes CONTROL_VM  disk messages from enum since they
are completely unused.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove server crust from visorchipset.

The visorchipset driver originally serviced both servers and
clients. This implementation is client only so remove some
more server side implementation.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused #define MAX_SERIAL_NUM

This patch simply removes #define MAX_SERIAL_NUM from iochannel.h

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused #define in controlvmchannel

This patch remove unused controlvmchannel.h #defines

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unused enum from controlvmchannel.h

This patch removes this enum since it is unused

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove typedef GUEST_PHYSICAL_ADDRESS to u64

This patch removes typedef GUEST_PHYSICAL_ADDRESS to u64

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Eliminate unused visorchannel_dump_section()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_get_memregion() isn't used

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Embed memregion in struct channel

This changes the API for visor_memregion_create() to require a
pre-allocated struct memregion. Embedding this in struct channel
avoids a layer of additional kmalloc()'s and error checks.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: move struct memregion to memregion.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: decouple visor_memregion_{read, write}()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_clear(): No need to use vmalloc here

Using a page is sufficient, and avoids the cost of vmalloc/vfree

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel_clear(): Avoid 64KB memory leak

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset.c: No need to include memregion.h anymore

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset: Use ioremap direction rather than heavy visor_memregion

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset: parser_init_guts(): Localize memregion usage

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Eliminate unnecessary 'requested' flag

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Use proper errno for mapit()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: memregion: Nothing uses overlap allocations, so nuke it

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: visorchannel_create_guts() always has parent == NULL

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel: visorchannel_create_overlap() is never used

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix sig_read_data and sig_read_data functions

The sig_read_data() and sig_write_data() functions are involved in 2 steps
of calls.  They really don't need to be and this makes for much simpler
code.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel some general function cleanups

Just some cleanups for visorchannel.c, and removal of
safe_sig_queue_validate() which is dead code.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchannel cleanup visorchannel_create_guts()

The error handling in this function was broken and while looking at that
I noticed that the whole function was in need of cleanup.  This patch
fixes the error handling, specifically

                if (!p) {
                        visorchannel_destroy(p);
                        channel = NULL;
                }

and does a lot of cleanup.  I also verified that the called functions
returned correct errors, and that led to a change in
visor_memregion_resize(), visorchannel_destroy() and
visor_memregion_destroy().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: cleanup visorbus_private.h

visorbus_private.h contains code that is called from visorbus into the
visorchipset code.  Now that the visorchipset code has been brought into
the visorbus directory, many of the declarations are not necessary and
can be cleaned up.

TODO: PARSER_WHICH_STRING enum only has one member used
(PARSERSTRING_NAME).

TODO: crash_obj_type appears to be unnecessary in the overall scheme of
code.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move visorchipset files to visorbus

Move visorchipset_main.c and visorchipset.h to visorbus/visorchipset.c and
visorbus/visorbus_private.h.  This leaves an empty visorchipset directory
which can also be destroyed.

As a result of this patch the visorchipset init code now calls the
visorbus_init() directly.  Similarily the visorchipset exit code now
cleans up by calling visorbus_exit().

No other functional changes were made.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move parser.[ch] functionality into visorchipset

This patch moves includes files and functions from parser.[ch] into
visorchipset.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove file.c and pass functionality to visorchipset

This patch trasitions the include files and functions from file.c
and places them into visorchipset_main.c

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: moving file.h functionality to visorchipset.h

this patch simply migrates file.h functionality to visorchipset.h

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove visorchipset_umode.h

removes visorchipset_umode.h and pass functionality to
visorchipset.h

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove visorbus_private.h

visorbus_private.h is only included from visorbus_main.c and has no
other purpose.  The code can be easily moved into visorbus_main.c.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove globals.h

globals.h is only included in visorchannel.c and only contains 2 includes.
These can be included directly in visorchannel.c.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: rename visorchannel_funcs.c to visorchannel.c

visorchannel_funcs.c is a remnant of the separate visorchannel
directory.  It should be called visorchannel now.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: unify devmajorminor attributes into visorbus_main.c

The code in devmajorminor_attr.[ch] only creates sysfs files and is
called only in visorbus_main.c.  This code should be unified into
visorbus_main.c.  The only changes are a forward declaration issue with
register_devmajorminor_attributes() and making the functions static.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: unify channel attributes into visorbus_main.c

The code in channel_attr.[ch] only creates sysfs files and is called
only in visorbus_main.c.  This code should be unified into
visorbus_main.c.   There are some functions that have been made static.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: unify businst attributes into visorbus_main.c

The code in businst_attr.[ch] only creates sysfs files and is called
only in visorbus_main.c.  This code should be unified into
visorbus_main.c.  There are some functions that have been made static.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove unused driver

The visorchannel feature is rolled into visorbus now and its headers
are public under visorbus.h.  Remove the unused driver, the old
header file and all the ccflag includes in the Makefile.

Also remove VISORCHANNEL from all Kconfigs as it is not needed.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move visorbus.h to public namespace

Turn visorbus.h into a public header that all visor* drivers will
include.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Dissolve visorchannel.h

This header is needed by other drivers and should be in a global namespace.
In addition, functionally it is part of visorbus, so roll the contents
into that header file.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move visorchannel into visorbus

visorchannel seems to be a necessary component to visorbus and can never
function as a standalone module.  Let's treat it like a visorbus feature
that is always enabled.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: add visorbus driver

This base driver provides bus functionality to visorhid, visorhba,
and visornic which will be later added to our driver base. Visorbus
supports sPar bus model and manages bus specific functionality. It
maintains the sysfs subtree /sys/devices/visorbus*/.It is
responsible for device creation and destruction of the devices on
its bus.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove write-only variable g_del_dump_msg_hdr

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove write-only variable g_diag_msg_hdr

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: No point in checking != 0

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Avoid some == 0 checks

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: delbusdevices() doesn't need to be inline

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: finddevice() doesn't need to be inline

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove unused typedef SPARREPORTEVENT_COMPLETE_FUNC

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: findbus() doesn't need to be inline

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove write-only visorchipset_bus_info.dev_no

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: buffer_list_pool isn't used for anything

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove a couple of unnecessary blank lines

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Don't include timskmod.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>