firefly-linux-kernel-4.4.55.git
14 years agoixgbe: move setting of GSO size for 82598 into ixgbe_configure_dcb
Alexander Duyck [Thu, 19 Aug 2010 13:34:04 +0000 (13:34 +0000)]
ixgbe: move setting of GSO size for 82598 into ixgbe_configure_dcb

We are unnecessarily modifying the GSO size for all HW when we don't need
to.  The code can be simplified by moving the check for DCB and the
adjustment of the GSO size for 82598 into ixgbe_configure_dcb.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: remove redundant DMA alignment code
Alexander Duyck [Thu, 19 Aug 2010 13:33:41 +0000 (13:33 +0000)]
ixgbe: remove redundant DMA alignment code

This patch removes the redundant DMA alignment code from the Rx buffer
allocation path.  This code is no longer necessary since all x86 buffers
are now DMA aligned due to recent changes to NET_IP_ALIGN and NET_SKB_PAD.

It also moves the setting of the Rx queue value into the allocation path
since it is more likely that the queue mapping will still be in the cache
at the time of allocation.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: cleanup ixgbe_get_drvinfo to be extra careful with buffer boundaries
Don Skidmore [Thu, 19 Aug 2010 13:33:16 +0000 (13:33 +0000)]
ixgbe: cleanup ixgbe_get_drvinfo to be extra careful with buffer boundaries

Make the code in ixgbe_get_drvinfo more protected against buffer overflow
boundaries by using snprintf and sizeof with snprintf.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoxilinx_emaclite: netpoll support
Michal Simek [Wed, 18 Aug 2010 01:22:49 +0000 (01:22 +0000)]
xilinx_emaclite: netpoll support

Netconsole requires poll support.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoslip: fix get_stats() method
Eric Dumazet [Wed, 18 Aug 2010 03:13:08 +0000 (03:13 +0000)]
slip: fix get_stats() method

Use integrated net_device_stats instead of a static one, and make sure
no transient values are feeded. ndo_get_stats() can be called by
concurrent cpus.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agovxge: Implement 64bit stats
Eric Dumazet [Wed, 18 Aug 2010 03:42:54 +0000 (03:42 +0000)]
vxge: Implement 64bit stats

vxge_get_stats() is racy, since it clears a block of memory (net_stats)
possibly still used by other cpus.

We can update this driver to full 64bit stats, since ndo_get_stats64()
provides a private block to store results, and driver maintains 64bit
counters already.

We also remove net_stats field from struct vxge_sw_stats

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoatm: remove a net_device_stats clear
Eric Dumazet [Wed, 18 Aug 2010 10:44:34 +0000 (10:44 +0000)]
atm: remove a net_device_stats clear

No need to clear device stats in lec_open()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoether3: Use net_device_stats from struct net_device
Tobias Klauser [Wed, 18 Aug 2010 20:15:31 +0000 (20:15 +0000)]
ether3: Use net_device_stats from struct net_device

struct net_device has its own struct net_device_stats member, so use
this one instead of a private copy in the ether1_priv struct. As the new
ndo_get_stats function would just return dev->stats we can omit it. This
patch also removes an incorrect memset of the stats on open.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoether1: Use net_device_stats from struct net_device
Tobias Klauser [Wed, 18 Aug 2010 20:15:04 +0000 (20:15 +0000)]
ether1: Use net_device_stats from struct net_device

struct net_device has its own struct net_device_stats member, so use
this one instead of a private copy in the ether1_priv struct. As the new
ndo_get_stats function would just return dev->stats we can omit it. This
patch also removes an incorrect memset of the stats on open.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet: simplify flags for tx timestamping
Oliver Hartkopp [Tue, 17 Aug 2010 08:59:14 +0000 (08:59 +0000)]
net: simplify flags for tx timestamping

This patch removes the abstraction introduced by the union skb_shared_tx in
the shared skb data.

The access of the different union elements at several places led to some
confusion about accessing the shared tx_flags e.g. in skb_orphan_try().

    http://marc.info/?l=linux-netdev&m=128084897415886&w=2

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/sunvnet.c: Use pr_<level> and netdev_<level>
Joe Perches [Tue, 17 Aug 2010 07:55:05 +0000 (07:55 +0000)]
drivers/net/sunvnet.c: Use pr_<level> and netdev_<level>

Use the current message logging styles.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/sungem: Use netdev_<level>, netif_<level> and pr_<level>
Joe Perches [Tue, 17 Aug 2010 07:55:04 +0000 (07:55 +0000)]
drivers/net/sungem: Use netdev_<level>, netif_<level> and pr_<level>

Use the current logging message styles.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosunhme: Use return value of register_netdev
Tobias Klauser [Tue, 17 Aug 2010 06:13:05 +0000 (06:13 +0000)]
sunhme: Use return value of register_netdev

Use the return value provided by register_netdev on error instead of
using a previously set value.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agogreth: Use return value of register_netdev
Tobias Klauser [Tue, 17 Aug 2010 06:11:24 +0000 (06:11 +0000)]
greth: Use return value of register_netdev

Use the return value provided by register_netdev on error instead of
hard setting it to -ENOMEM.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/qlcnic: Use available error codes
Julia Lawall [Mon, 16 Aug 2010 10:23:51 +0000 (10:23 +0000)]
drivers/net/qlcnic: Use available error codes

The error code is stored in the variable err, but it is the variable ret
that is returned instead.  So store the error code in ret.  Err is then
useless.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
local idexpression x;
constant C;
@@

if (...) { ...
  x = -C
  ... when != x
(
  return <+...x...+>;
|
  return NULL;
|
  return;
|
* return ...;
)
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/ax25: Use available error codes
Julia Lawall [Mon, 16 Aug 2010 06:28:19 +0000 (06:28 +0000)]
net/ax25: Use available error codes

Error codes are stored in err, but the return value is always 0.  Return
err instead.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
local idexpression x;
constant C;
@@

if (...) { ...
  x = -C
  ... when != x
(
  return <+...x...+>;
|
  return NULL;
|
  return;
|
* return ...;
)
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/ax25: Use available error codes
Julia Lawall [Mon, 16 Aug 2010 06:26:57 +0000 (06:26 +0000)]
net/ax25: Use available error codes

Error codes are stored in err, but the return value is always 0.  Return
err instead.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
local idexpression x;
constant C;
@@

if (...) { ...
  x = -C
  ... when != x
(
  return <+...x...+>;
|
  return NULL;
|
  return;
|
* return ...;
)
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/pcmcia: Use pr_<level> and netdev_<level>
Joe Perches [Thu, 12 Aug 2010 12:22:51 +0000 (12:22 +0000)]
drivers/net/pcmcia: Use pr_<level> and netdev_<level>

On Mon, 2010-08-09 at 17:34 +0200, Dominik Brodowski wrote:
> look good from a PCMCIA point of view, therefore:
> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

If PCMCIA is still being looked after, then here's
another for you, maybe for 2.6.37.

Use the more descriptive logging message styles.

There are whitespace/indentation errors in the original
sources that these changes do not modify, so checkpatch
errors were cheerfully ignored.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/sched: remove unneeded NULL check
Dan Carpenter [Sat, 14 Aug 2010 11:09:49 +0000 (11:09 +0000)]
net/sched: remove unneeded NULL check

There is no need to check "s".  nla_data() doesn't return NULL.  Also we
already dereferenced "s" at this point so it would have oopsed ealier if
it were NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agos2io: Update driver version
Jon Mason [Thu, 12 Aug 2010 05:03:04 +0000 (05:03 +0000)]
s2io: Update driver version

Update s2io driver's version to reflect the series of patches.

Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agos2io: remove unused code
Jon Mason [Thu, 12 Aug 2010 05:03:03 +0000 (05:03 +0000)]
s2io: remove unused code

usr_addrs is never referenced outside the initial struct population
during open, thus making it unnecessary.  Remove it, the code that
references it, and the struct that it is the only user of.

Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net: Convert unbounded kzalloc calls to kcalloc
Joe Perches [Wed, 11 Aug 2010 07:02:48 +0000 (07:02 +0000)]
drivers/net: Convert unbounded kzalloc calls to kcalloc

These changes may be slightly safer in some instances.

There are other kzalloc calls with a multiply, but those
calls are typically "small fixed #" * sizeof(some pointer)"
and those are not converted.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Prevent missing name table entries when link flip-flops rapidly
Allan Stephens [Tue, 17 Aug 2010 11:00:16 +0000 (11:00 +0000)]
tipc: Prevent missing name table entries when link flip-flops rapidly

Ensure that TIPC does not re-establish communication with a
neighboring node until it has finished updating all data structures
containing information about that node to reflect the earlier loss of
contact.  Previously, it was possible for TIPC to perform its purge of
name table entries relating to the node once contact had already been
re-established, resulting in the unwanted removal of valid name table
entries.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Allow connect() to wait indefinitely
Allan Stephens [Tue, 17 Aug 2010 11:00:15 +0000 (11:00 +0000)]
tipc: Allow connect() to wait indefinitely

Cause a socket whose TIPC_CONN_TIMEOUT option is zero to wait
indefinitely for a response to a connection request using connect().
Previously, specifying a timeout of 0 ms resulted in an immediate
timeout, which was inconsistent with the behavior specified by Posix
for a socket's receive and send timeout.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Minor enhancements to name table display format
Allan Stephens [Tue, 17 Aug 2010 11:00:14 +0000 (11:00 +0000)]
tipc: Minor enhancements to name table display format

Eliminate printing of dashes after name table column headers
(to adhere more closely to the standard format used in tipc-config),
and simplify name table display logic using array lookups rather
than if-then-else logic.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Optimize tipc_node_has_active_links()
Allan Stephens [Tue, 17 Aug 2010 11:00:12 +0000 (11:00 +0000)]
tipc: Optimize tipc_node_has_active_links()

Eliminate unnecessary checking for null node pointer and redundant
check of second active link array entry.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Remove per-connection sequence number logic
Allan Stephens [Tue, 17 Aug 2010 11:00:11 +0000 (11:00 +0000)]
tipc: Remove per-connection sequence number logic

Remove validation of the per-connection sequence numbers on routable
connections, since routable connections are not supported by TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Fix bug in broadcast link transmit statistics computation
Allan Stephens [Tue, 17 Aug 2010 11:00:10 +0000 (11:00 +0000)]
tipc: Fix bug in broadcast link transmit statistics computation

Modify TIPC's broadcast link so that it counts each piece of a
fragmented message individually, rather than as treating the group
as a single message.  This ensures that proper correlation of sent
and received traffic can be done when the broadcast link statistics
are displayed, and is consistent with the way fragments are counted
by TIPC's unicast links.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Fix premature broadcast advertisement by sending node
Allan Stephens [Tue, 17 Aug 2010 11:00:09 +0000 (11:00 +0000)]
tipc: Fix premature broadcast advertisement by sending node

Prevent a TIPC node from sending out a LINK_STATE message
advertising a broadcast message that it is in the process
of sending, but has not yet actually sent.  Previously, it was
possible for a link timeout to occur in between the time the
broadcast link updated its "last message sent" counter and the
time the broadcast message was passed to the broadcast bearer
for transmission.  This ensures that the code which issues
the LINK_STATE message isn't informed of the new message until
the broadcast bearer has had a chance to send it.

Note: The "last message sent" value is stored in the "fsm_msg_count"
field of the link structure used by the broadcast link.  Since the
broadcast link doesn't utilize the normal link FSM, this field can
be re-used rather than adding a new field to the broadcast link.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Prevent crash when broadcast link cannot send to all nodes
Allan Stephens [Tue, 17 Aug 2010 11:00:08 +0000 (11:00 +0000)]
tipc: Prevent crash when broadcast link cannot send to all nodes

Allow TIPC's broadcast link to continue operation when it is unable
to send a message to all nodes in the cluster.  Previously, the
broadcast link attempted to put the broadcast pseudo-bearer into a
blocked state; however, this caused a crash because the associated
bearer structure is only partially initialized.  Further
investigation has revealed some conceptual problems with blocking
the pseudo-bearer; consequently, this functionality has been
disabled for the time being and the undelivered message is
eventually resent by the broadcast link's existing message
retransmission mechanism (if possible).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Check for disabled bearer when processing incoming messages
Allan Stephens [Tue, 17 Aug 2010 11:00:07 +0000 (11:00 +0000)]
tipc: Check for disabled bearer when processing incoming messages

Add a check to tipc_recv_msg() to ensure it discards messages
arriving on a newly disabled bearer.  This is needed to deal with a
race condition that can arise if the bearer is in the midst of being
disabled when it receives a message.  Performing the check after
tipc_net_lock has been taken ensures that TIPC's bearers are in a
stable state while the message is being processed.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: correct problems with misleading flags returned using poll()
Allan Stephens [Tue, 17 Aug 2010 11:00:06 +0000 (11:00 +0000)]
tipc: correct problems with misleading flags returned using poll()

Prevent TIPC from incorrectly setting returned flags to poll()
in the following cases:

- an unconnected socket no longer indicates that it is always readable

- an unconnected, connecting, or listening socket no longer indicates
  that it is always writable

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Provide correct error code for unsupported connect() operation
Allan Stephens [Tue, 17 Aug 2010 11:00:05 +0000 (11:00 +0000)]
tipc: Provide correct error code for unsupported connect() operation

Modify TIPC to return EOPNOTSUPP if an application attempts to perform
 a non-blocking connect() operation, which is not supported by TIPC.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: add SO_RCVLOWAT support to stream socket receive path
Florian Westphal [Tue, 17 Aug 2010 11:00:04 +0000 (11:00 +0000)]
tipc: add SO_RCVLOWAT support to stream socket receive path

Add support for the SO_RCVLOWAT socket option to TIPC's stream socket
type.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotipc: Fix log buffer memory leak if initialization fails
Anders Kaseorg [Tue, 17 Aug 2010 11:00:03 +0000 (11:00 +0000)]
tipc: Fix log buffer memory leak if initialization fails

Moves log buffer cleanup into tipc_core_stop() so that memory allocated
for the log buffer is freed if tipc_core_start() is unsuccessful.

Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: turn off lro when rxcsum is disabled.
Sucheta Chakraborty [Tue, 17 Aug 2010 00:34:25 +0000 (00:34 +0000)]
qlcnic: turn off lro when rxcsum is disabled.

o Also dont allow lro to be turn on, if rx csum is disabled

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: fix link diag test
Sony Chacko [Tue, 17 Aug 2010 00:34:24 +0000 (00:34 +0000)]
qlcnic: fix link diag test

o Give sufficient time for all makes of PHY modules
  to establish the link after loopback test.
o Perform online test before offline test.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: fix link status message
Sony Chacko [Tue, 17 Aug 2010 00:34:23 +0000 (00:34 +0000)]
qlcnic: fix link status message

Display interface name with netdev_info() for link status message.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: add eswitch statistics support
Amit Kumar Salecha [Tue, 17 Aug 2010 00:34:22 +0000 (00:34 +0000)]
qlcnic: add eswitch statistics support

Adding eswitch statistics support. User can get
whole eswitch stats or stats of func belong to that eswitch.

Added:
o command to get statistics of eswitch and function.
o sysfs support to export eswitch and func statatistics.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: fix for setting function modes
Rajesh Borundia [Tue, 17 Aug 2010 00:34:21 +0000 (00:34 +0000)]
qlcnic: fix for setting function modes

function modes was not working with CNA device, in CNA mode
other function(FCOE) can be enabled before nic.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: device state management fixes for virtual func
Amit Kumar Salecha [Tue, 17 Aug 2010 00:34:20 +0000 (00:34 +0000)]
qlcnic: device state management fixes for virtual func

o NPAR state should be set to operationl by Mangement function only.
o NPAR state should be set to non operational before device reset.
o VF function should wait for NPAR state to be operational.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: fix aer for virtual func
Amit Kumar Salecha [Tue, 17 Aug 2010 00:34:19 +0000 (00:34 +0000)]
qlcnic: fix aer for virtual func

Virtual function are not privilge to initialize firmware.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Mark intr_timer in vnic_enet_config as deprecated
Roopa Prabhu [Tue, 10 Aug 2010 18:55:26 +0000 (18:55 +0000)]
enic: Mark intr_timer in vnic_enet_config as deprecated

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Check if rq/wq buf not NULL before freeing them
Roopa Prabhu [Tue, 10 Aug 2010 18:55:20 +0000 (18:55 +0000)]
enic: Check if rq/wq buf not NULL before freeing them

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Clean up: remove enic_dev_stats_clear
Roopa Prabhu [Tue, 10 Aug 2010 18:55:15 +0000 (18:55 +0000)]
enic: Clean up: remove enic_dev_stats_clear

Remove function enic_dev_stats_clear and its reference in enic device
init code. Firmware clears device stats on device open. So, no need for
the driver to do it again.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Use offsetof macro in vic tlv length calculation
Roopa Prabhu [Tue, 10 Aug 2010 18:55:10 +0000 (18:55 +0000)]
enic: Use offsetof macro in vic tlv length calculation

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Add new firmware devcmds
Roopa Prabhu [Tue, 10 Aug 2010 18:55:05 +0000 (18:55 +0000)]
enic: Add new firmware devcmds

Add new firmware devcmds:  CMD_PROXY_BY_INDEX, CMD_CONFIG_INFO_GET

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Add support for firmware management device
Roopa Prabhu [Tue, 10 Aug 2010 18:55:00 +0000 (18:55 +0000)]
enic: Add support for firmware management device

This patch adds support for firmware management device in enic driver.
A management device is a virtual PCIe device that firmware can present
to the host as its management endpoint. It provides the interface between
the host and adapter firmware for all management operations.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoenic: Add set mac address
Roopa Prabhu [Tue, 10 Aug 2010 18:54:55 +0000 (18:54 +0000)]
enic: Add set mac address

This patch implements the ndo_set_mac_address netdev operation for an enic device

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agocpmac: fix all checkpatch errors and warnings
Florian Fainelli [Sun, 8 Aug 2010 10:09:39 +0000 (10:09 +0000)]
cpmac: fix all checkpatch errors and warnings

This patches fixes a couple of checkpatch warnings and errors:
- lines over 80 columns
- printk() instead of pr_cont()
- assignments in tests (if ((foo == bar())))

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoam79c961a: Use net_device_stats from struct net_device
Tobias Klauser [Mon, 9 Aug 2010 05:04:34 +0000 (05:04 +0000)]
am79c961a: Use net_device_stats from struct net_device

struct net_device has its own struct net_device_stats member, so we can
use this one instead of a private copy in the dev_priv struct.

Cc: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agor6040: fix all checkpatch errors and warnings
Florian Fainelli [Sun, 8 Aug 2010 10:08:44 +0000 (10:08 +0000)]
r6040: fix all checkpatch errors and warnings

This patch fixes a couple of errors and warnings spotted by checkpatch.pl:
- some lines were over 80 columns
- there were some whitespaces left

The call to printk is now replaced by a call to pr_info and the log-level
included in the driver version is now removed, so there are no longer false
positives on this warning.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agopcnet_cs: Use pr_fmt and pr_<level>
Joe Perches [Sun, 8 Aug 2010 04:50:36 +0000 (04:50 +0000)]
pcnet_cs: Use pr_fmt and pr_<level>

It looks as if the printks in get_ax88190 are
incorrect and were duplicated and superceded by a
test in pcnet_config, so I removed them.

Changed the level of the ax88190 test to KERN_NOTICE
to match the other message styles in pcnet_config.

Compiled but untested.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agopcnet_cs: Use proper netdev_*-printouts
Wolfram Sang [Sun, 8 Aug 2010 02:32:05 +0000 (02:32 +0000)]
pcnet_cs: Use proper netdev_*-printouts

To prevent broken messages like:

[  204.024291] eth%d: pcnet_reset_8390() did not complete.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoethtool: Provide a default implementation of ethtool_ops::get_drvinfo
Ben Hutchings [Tue, 17 Aug 2010 09:31:15 +0000 (02:31 -0700)]
ethtool: Provide a default implementation of ethtool_ops::get_drvinfo

The driver name and bus address for a net_device can normally be found
through the driver model now.  Instead of requiring drivers to provide
this information redundantly through the ethtool_ops::get_drvinfo
operation, use the driver model to do so if the driver does not define
the operation.  Since ETHTOOL_GDRVINFO no longer requires the driver
to implement any operations, do not require net_device::ethtool_ops to
be set either.

Remove implementations of get_drvinfo and ethtool_ops that provide
only this information.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/decnet: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:29:38 +0000 (10:29 +0000)]
net/decnet: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/isdn: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:29:19 +0000 (10:29 +0000)]
drivers/isdn: Adjust confusing if indentation

In hisax/hfc_sx.c and mISDN/l1oip_core.c, the code after the if is
outdented so that it is not aligned with the if branch.

In mISDN/dsp_cmx.c, an else is added between the original if branch and the
following statement, in line with the code following it.  Without this
change, the first assignment to dsp->rx_W has no useful effect.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:28:31 +0000 (10:28 +0000)]
drivers/net: Adjust confusing if indentation

Outdent the code following the if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/hamradio: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:28:12 +0000 (10:28 +0000)]
drivers/net/hamradio: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/bnx2x: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:26:38 +0000 (10:26 +0000)]
drivers/net/bnx2x: Adjust confusing if indentation

Outdent the code following the if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:26:20 +0000 (10:26 +0000)]
drivers/net: Adjust confusing if indentation

Outdent the code following the if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/atm: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:25:24 +0000 (10:25 +0000)]
drivers/atm: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:22:20 +0000 (10:22 +0000)]
drivers/net: Adjust confusing if indentation

In amd8111e.c, indent the branch of an if.
In eepro.c, outdent the code following the if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/irda: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:22:00 +0000 (10:22 +0000)]
drivers/net/irda: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/atm: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:19:00 +0000 (10:19 +0000)]
net/atm: Adjust confusing if indentation

Outdent the code following an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/wan: Adjust confusing if indentation
Julia Lawall [Thu, 5 Aug 2010 10:17:00 +0000 (10:17 +0000)]
drivers/net/wan: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomacvtap: Implement multiqueue for macvtap driver
Krishna Kumar [Wed, 4 Aug 2010 06:15:59 +0000 (06:15 +0000)]
macvtap: Implement multiqueue for macvtap driver

Implement multiqueue facility for macvtap driver. The idea is that
a macvtap device can be opened multiple times and the fd's can be
used to register eg, as backend for vhost.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agocore: Factor out flow calculation from get_rps_cpu
Krishna Kumar [Wed, 4 Aug 2010 06:15:52 +0000 (06:15 +0000)]
core: Factor out flow calculation from get_rps_cpu

Factor out flow calculation code from get_rps_cpu, since other
functions can use the same code.

Revisions:

v2 (Ben): Separate flow calcuation out and use in select queue.
v3 (Arnd): Don't re-implement MIN.
v4 (Changli): skb->data points to ethernet header in macvtap, and
make a fast path. Tested macvtap with this patch.
v5 (Changli):
- Cache skb->rxhash in skb_get_rxhash
- macvtap may not have pow(2) queues, so change code for
  queue selection.
    (Arnd):
- Use first available queue if all fails.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobnx2x: Load firmware in open() instead of probe()
Dmitry Kravkov [Tue, 3 Aug 2010 21:49:40 +0000 (21:49 +0000)]
bnx2x: Load firmware in open() instead of probe()

Loading firmware when actually bringing eth device up.
This also will allow driver to be insmoded when filesystem with
firmware files is not available yet.

Suggested by Stephen Hemminger <shemminger@vyatta.com>

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Tue, 17 Aug 2010 03:44:14 +0000 (20:44 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 16 Aug 2010 20:56:01 +0000 (13:56 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

14 years agoRevert "netlink: netlink_recvmsg() fix"
David S. Miller [Mon, 16 Aug 2010 06:21:50 +0000 (23:21 -0700)]
Revert "netlink: netlink_recvmsg() fix"

This reverts commit 1235f504aaba2ebeabc863fdb3ceac764a317d47.

It causes regressions worse than the problem it was trying
to fix.  Eric will try to solve the problem another way.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoLinux 2.6.36-rc1
Linus Torvalds [Mon, 16 Aug 2010 00:41:37 +0000 (17:41 -0700)]
Linux 2.6.36-rc1

14 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 16 Aug 2010 00:37:07 +0000 (17:37 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  gcc-4.6: ACPI: fix unused but set variables in ACPI
  ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI processor: remove deprecated ACPI procfs I/F
  ACPI power_resource: remove unused procfs I/F
  ACPI: remove deprecated ACPI procfs I/F
  ACPI: introduce drivers/acpi/sysfs.c
  ACPI: introduce module parameter acpi.aml_debug_output
  ACPI: introduce drivers/acpi/debugfs.c
  ACPI, APEI, ERST debug support
  ACPI, APEI, Manage GHES as platform devices
  ACPI, APEI, Rename CPER and GHES severity constants
  ACPI, APEI, Fix a typo of error path of apei_resources_request
  ACPI / ACPICA: Fix reference counting problems with GPE handlers
  ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device
  ACPI / Sleep: Drop acpi_suspend_finish()
  ACPI / Sleep: Consolidate suspend and hibernation routines
  ACPI / Wakeup: Simplify enabling of wakeup devices
  ACPI / Sleep: Rework enabling wakeup devices
  ACPI / Sleep: Free NVS copy if suspending of devices fails

Fixed up totally buggered "ACPI: fix unused but set variables in ACPI"
patch that doesn't even compile in the merge.

Thanks to Sedat Dilek <sedat.dilek@googlemail.com> for noticing the
breakage before I even pulled.  And a big "Grrr.." at Len for not even
bothering to compile the tree before asking me to pull.

14 years agoMerge git://git.infradead.org/iommu-2.6
Linus Torvalds [Mon, 16 Aug 2010 00:34:20 +0000 (17:34 -0700)]
Merge git://git.infradead.org/iommu-2.6

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Fix 32-bit build warning with __cmpxchg()
  intr-remap: allow disabling source id checking

14 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Mon, 16 Aug 2010 00:32:47 +0000 (17:32 -0700)]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  mtd/nand_ids: Fix buswidth
  mtd/m25p80: fix test for end of loop
  mtd/m25p80: retlen is never NULL
  MIPS: Fix gen_nand probe structures contents
  gen_nand: Test if nr_chips field is valid
  BFIN: Fix gen_nand probe structures contents
  nand/denali: move all hardware initialization work to denali_hw_init
  nand/denali: Add a page check in denali_read_page & denali_read_page_raw
  nand/denali: use cpu_relax() while waiting for hardware interrupt
  nand/denali: change read_status function method
  nand/denali: Fixed check patch warnings
  ARM: Fix gen_nand probe structures contents
  mtd/nand_base: fix kernel-doc warnings & typos
  nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
  nand/denali: Fixed handle ECC error bugs
  nand/denali: use iowrite32() to replace denali_write32()
  nand/denali: Fixed probe function bugs

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Mon, 16 Aug 2010 00:31:43 +0000 (17:31 -0700)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: don't validate CROSS_COMPILE needlessly
  arch/tile: export only COMMAND_LINE_SIZE to userspace.
  arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  arch/tile: Rename the hweight() implementations to __arch_hweight()
  arch/tile: extend syscall ABI to set r1 on return as well.
  arch/tile: Various cleanups.
  arch/tile: support backtracing on TILE-Gx
  arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx.
  arch/tile: Use separate, better minsec values for clocksource and sched_clock.
  arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd.
  arch: tile: mm: pgtable.c: Removed duplicated #include
  arch: tile: kernel/proc.c Removed duplicated #include
  Add fanotify syscalls to <asm-generic/unistd.h>.
  arch/tile: support new kunmap_atomic() naming convention.
  tile: remove unused ISA_DMA_THRESHOLD define

Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version
with the reduced defconfig).

14 years agoarch/tile: don't validate CROSS_COMPILE needlessly
Chris Metcalf [Sun, 15 Aug 2010 19:01:45 +0000 (15:01 -0400)]
arch/tile: don't validate CROSS_COMPILE needlessly

With this change, the arch/tile Makefile will only check for a valid
combination of CROSS_COMPILE vs "uname -m" for a few common targets
that are typically the ones we get wrong (vmlinux, all, and modules).
The change handles the case of an empty "make" goal like "make all".

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
14 years agomm: fix up some user-visible effects of the stack guard page
Linus Torvalds [Sun, 15 Aug 2010 18:35:52 +0000 (11:35 -0700)]
mm: fix up some user-visible effects of the stack guard page

This commit makes the stack guard page somewhat less visible to user
space. It does this by:

 - not showing the guard page in /proc/<pid>/maps

   It looks like lvm-tools will actually read /proc/self/maps to figure
   out where all its mappings are, and effectively do a specialized
   "mlockall()" in user space.  By not showing the guard page as part of
   the mapping (by just adding PAGE_SIZE to the start for grows-up
   pages), lvm-tools ends up not being aware of it.

 - by also teaching the _real_ mlock() functionality not to try to lock
   the guard page.

   That would just expand the mapping down to create a new guard page,
   so there really is no point in trying to lock it in place.

It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.

Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.

Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 15 Aug 2010 18:22:00 +0000 (11:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/usb/format: silence uninitialized variable warnings
  MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices
  MAINTAINERS: Make Wolfson entry also cover CODEC drivers
  ASoC: Only tweak WM8994 chip configuration on devices up to rev D
  ASoC: Optimise DSP performance for WM8994
  ALSA: hda - Fix dynamic ADC change working again
  ALSA: hda - Restrict PCM parameters per ELD information over HDMI
  sound: oss: sh_dac_audio.c removed duplicated #include

14 years agoMerge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Sun, 15 Aug 2010 18:17:52 +0000 (11:17 -0700)]
Merge branch 'idle-release' of git://git./linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: recognize Lincroft Atom Processor
  intel_idle: no longer EXPERIMENTAL
  intel_idle: disable module support
  intel_idle: add support for Westmere-EX
  intel_idle: delete power_policy modparam, and choose substate functions
  intel_idle: delete substates DEBUG modparam

14 years agoarch/tile: export only COMMAND_LINE_SIZE to userspace.
Chris Metcalf [Sun, 15 Aug 2010 16:14:41 +0000 (12:14 -0400)]
arch/tile: export only COMMAND_LINE_SIZE to userspace.

This fixes a failure in "make headers_check" for tile.
I hadn't realized this file was exported to userspace by default.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
14 years agoarch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Chris Metcalf [Sat, 14 Aug 2010 00:43:39 +0000 (20:43 -0400)]
arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN

See commit a6eb9fe105d5de0053b261148cee56c94b4720ca.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
14 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sun, 15 Aug 2010 12:34:02 +0000 (14:34 +0200)]
Merge branch 'fix/asoc' into for-linus

14 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Sun, 15 Aug 2010 12:33:56 +0000 (14:33 +0200)]
Merge branch 'fix/hda' into for-linus

14 years agoALSA: sound/usb/format: silence uninitialized variable warnings
Dan Carpenter [Sat, 14 Aug 2010 17:29:53 +0000 (19:29 +0200)]
ALSA: sound/usb/format: silence uninitialized variable warnings

Gcc complains that ret might be used uninitialized:

sound/usb/format.c: In function ‘snd_usb_parse_audio_format’:
sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:354: note: ‘ret’ was declared here
sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:414: note: ‘ret’ was declared here

I suppose it could be uninitialized if there is ever a UAC_VERSION_3
released. Anyway this patch is worthwhile if only to silence the gcc
warning.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
14 years agoipv6: remove sysctl jiffies conversion on gc_elasticity and min_adv_mss
Min Zhang [Sun, 15 Aug 2010 05:42:51 +0000 (22:42 -0700)]
ipv6: remove sysctl jiffies conversion on gc_elasticity and min_adv_mss

sysctl output ipv6 gc_elasticity and min_adv_mss as values divided by
HZ. However, they are not in unit of jiffies, since ip6_rt_min_advmss
refers to packet size and ip6_rt_fc_elasticity is used as scaler as in
expire>>ip6_rt_gc_elasticity, so replace the jiffies conversion
handler will regular handler for them.

This has impact on scripts that are currently working assuming the
divide by HZ, will yield different results with this patch in place.

Signed-off-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoxfrm: Use GFP_ATOMIC in xfrm_compile_policy
Herbert Xu [Sun, 15 Aug 2010 05:38:09 +0000 (22:38 -0700)]
xfrm: Use GFP_ATOMIC in xfrm_compile_policy

As xfrm_compile_policy runs within a read_lock, we cannot use
GFP_KERNEL for memory allocations.

Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'linus' into release
Len Brown [Sun, 15 Aug 2010 05:06:31 +0000 (01:06 -0400)]
Merge branch 'linus' into release

Conflicts:
drivers/acpi/debug.c

Signed-off-by: Len Brown <len.brown@intel.com>
14 years agogcc-4.6: ACPI: fix unused but set variables in ACPI
Andi Kleen [Tue, 20 Jul 2010 22:18:36 +0000 (15:18 -0700)]
gcc-4.6: ACPI: fix unused but set variables in ACPI

Some minor improvements in error handling, but overall it was mostly dead
code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
Zhang Rui [Thu, 15 Jul 2010 02:46:44 +0000 (10:46 +0800)]
ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS

Mark the ACPI thermal procfs I/F deprecated, because /sys/class/thermal/
is already available and has been working for years w/o any problem.

The ACPI thermal procfs I/F will be removed in 2.6.37.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
Zhang Rui [Thu, 15 Jul 2010 02:46:43 +0000 (10:46 +0800)]
ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS

Mark ACPI video driver procfs I/F deprecated, including:
/proc/acpi/video/*/info
/proc/acpi/video/*/DOS
/proc/acpi/video/*/ROM
/proc/acpi/video/*/POST
/proc/acpi/video/*/POST_info
/proc/acpi/video/*/*/info
/proc/acpi/video/*/*/state
/proc/acpi/video/*/*/EDID
and
/proc/acpi/video/*/*/brightness, because
1. we already have the sysfs I/F /sysclass/backlight/ as the replacement
of /proc/acpi/video/*/*/brightness.
2. the other procfs I/F is not useful for userspace.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI processor: remove deprecated ACPI procfs I/F
Zhang Rui [Thu, 15 Jul 2010 02:46:41 +0000 (10:46 +0800)]
ACPI processor: remove deprecated ACPI procfs I/F

Remove deprecated ACPI processor procfs I/F, including:
/proc/acpi/processor/CPUX/power
/proc/acpi/processor/CPUX/limit
/proc/acpi/processor/CPUX/info

/proc/acpi/processor/CPUX/throttling still exists,
as we don't have sysfs I/F available for now.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI power_resource: remove unused procfs I/F
Zhang Rui [Thu, 15 Jul 2010 02:46:38 +0000 (10:46 +0800)]
ACPI power_resource: remove unused procfs I/F

Remove unused ACPI power procfs I/F.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI: remove deprecated ACPI procfs I/F
Zhang Rui [Thu, 15 Jul 2010 02:46:33 +0000 (10:46 +0800)]
ACPI: remove deprecated ACPI procfs I/F

Rmove deprecated ACPI procfs I/F, including
/proc/acpi/debug_layer
/proc/acpi/debug_level
/proc/acpi/info
/proc/acpi/dsdt
/proc/acpi/fadt
/proc/acpi/sleep

because the sysfs I/F is already available
and has been working well for years.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI: introduce drivers/acpi/sysfs.c
Zhang Rui [Thu, 15 Jul 2010 02:46:30 +0000 (10:46 +0800)]
ACPI: introduce drivers/acpi/sysfs.c

Introduce drivers/acpi/sysfs.c.

code for ACPI sysfs I/F, including
#ifdef ACPI_DEBUG
/sys/module/acpi/parameters/debug_layer
/sys/module/acpi/parameters/debug_level
/sys/module/acpi/parameters/trace_method_name
/sys/module/acpi/parameters/trace_debug_layer
/sys/module/acpi/parameters/trace_debug_level
/sys/module/acpi/parameters/trace_state
#endif
/sys/module/acpi/parameters/acpica_version
/sys/firmware/acpi/tables/
/sys/firmware/acpi/interrupts/
is moved to this file.

No function change in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoMerge branch 'acpica-gpe' into release
Len Brown [Sun, 15 Aug 2010 04:25:40 +0000 (00:25 -0400)]
Merge branch 'acpica-gpe' into release

14 years agoMerge branch 'bugzilla-16422' into release
Len Brown [Sun, 15 Aug 2010 03:57:32 +0000 (23:57 -0400)]
Merge branch 'bugzilla-16422' into release

14 years agoMerge branch 'procfs-cleanup' into release
Len Brown [Sun, 15 Aug 2010 03:55:57 +0000 (23:55 -0400)]
Merge branch 'procfs-cleanup' into release

14 years agoMerge branch 'apei' into release
Len Brown [Sun, 15 Aug 2010 03:55:47 +0000 (23:55 -0400)]
Merge branch 'apei' into release