drm/i915: PM irq enabling is generic on gen8, too

No need to list all the platforms explicitly.

The prefix is a bit inconsistent since we usually pick gen8_ for GT
related functions. But this anti-pattern is already established with snb,
so material for a different patch.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Documentation/drm: Describing aspect ratio property

Updated drm documentation to include desscription of aspect ratio property.

v2: Updated aspect ratio specific documentation on top of the HTML table created.

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add aspect ratio property for HDMI

Create and attach the drm property to set aspect ratio. If there is no user
specified value, then PAR_NONE/Automatic option is set by default. User can
select aspect ratio 4:3 or 16:9. The aspect ratio selected by user would
come into effect with a mode set.

v2: Modified switch case to include aspect ratio enum changes

v3: Modified the patch according the change in the earlier patch to return
errno in case property creation fails. With this change, property will be
attached only if creation is successful

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/edid: Check for user aspect ratio input

In case user has specified an input for aspect ratio through the property,
then the user space value for PAR would take preference over the value from
CEA mode list.

v2: Thierry's review comments.
- Modified the comment "Populate..." as per review comments

v3: Thierry's review comments.
- Modified the comment to block comment format.

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/crtc: Add property for aspect ratio

Added a property to enable user space to set aspect ratio.
This patch contains declaration of the property and code to create the
property.

v2: Thierry's review comments.
- Made aspect ratio enum generic instead of HDMI/CEA specfic
- Removed usage of temporary aspect_ratio variable

v3: Thierry's review comments.
- Fixed indentation

v4: Thierry's review comments.
- Return ENOMEM when property creation fails

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/chv: Drop WaGsvBringDownFreqInRc6

Drop WaGsvBringDownFreq on CHV.
When in RC6 requesting the min freq should be fine to bring the
voltage down.

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@Virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: remove useless runtime PM get calls

We already call intel_display_power_get, which will get a power
domain, and every power domain should get a runtime PM reference,
which will wake up the machine.

v2: - Also touch intel_crt_detect() (Ville).

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Fixup commit message as spotted by Ville.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Force GPU Freq to lowest while suspending.

We might be leaving the GPU Frequency (and thus vnn) high during the suspend.
Force gt to move to lowest freq while suspending.

v2: Fixed typo in commit message (Deepak)

v3: Force gt to lowest freq in suspend_gt_powersave (Daniel)

v4: Add GPU min freq set _after_ we've cancelled the rps works (Daniel)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Handle failure to kick out a conflicting fb driver

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Enable PSR by default.

Panel Self Refresh is an eDP power saving feature specified by VESA's eDP v1.3,
that allows some panel componets to shutdown while you still see static images on
the screen. Besides being supported on the platform it must be supported by the
eDP panel itself.

Now that we have the propper frontbuffer tracking support and correct locks on place
we can enabled this feature by default.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove redundant HAS_PSR checks

We only need to check for this in psr_enable, everything else is
already protect by the dev_priv->psr.enabled checks. Those need the
psr locking, but these functions are called infrequent enough that the
locking overhead is negligible.

Suggested by Chris Wilson.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Improve PSR debugfs output

Add busy_frontbuffer_bits and locking.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Fix up PSR frontbuffer tracking

I've tried to split this up, but all the changes are so tightly
related that I didn't find a good way to do this without breaking
bisecting. Essentially this completely changes how psr is glued into
the overall driver, and there's not much you can do to soften such a
paradigm change.

- Use frontbuffer tracking bits stuff to separate disable and
  re-enable.

- Don't re-check everything in the psr work. We have now accurate
  tracking for everything, so no need to check for sprites or tiling
  really. Allows us to ditch tons of locks.

- That in turn allows us to properly cancel the work in the disable
  function - no more deadlocks.

- Add a check for HSW sprites and force a flush. Apparently the
  hardware doesn't forward the flushing when updating the sprite base
  address. We can do the same trick everywhere else we have such
  issues, e.g. on baytrail with ... everything.

- Don't re-enable psr with a delay in psr_exit. It really must be
  turned off forever if we detect a gtt write. At least with the
  current frontbuffer render tracking. Userspace can do a busy ioctl
  call or no-op pageflip to re-enable psr.

- Drop redundant checks for crtc and crtc->active - now that they're
  only called from enable this is guaranteed.

- Fix up the hsw port check. eDP can also happen on port D, but the
  issue is exactly that it doesn't work there. So an || check is
  wrong.

- We still schedule the psr work with a delay. The frontbuffer
  flushing interface mandates that we upload the next full frame, so
  need to wait a bit. Once we have single-shot frame uploads we can do
  better here.

v2: Don't enable psr initially, rely upon the fb flush of the initial
plane setup for that. Gives us more unified code flow and makes the
crtc enable sequence less a special case.

v3: s/psr_exit/psr_invalidate/ for consistency

v4: Fixup whitespace.

v5: Correctly bail out of psr_invalidate/flush when
dev_priv->psr.enabled is NULL. Spotted by Rodrigo.

v6:
- Only schedule work when there's work to do. Fixes WARNINGs reported
  by Rodrigo.
- Comments Chris requested to clarify the code.

v7: Fix conflict on rebase (Rodrigo)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add locking to psr code

It's not really optional to have locking ...

The ugly part is how much locking the psr work needs since it has to
recheck everything. Which is way too much. But we need to ditch the
psr work in it's current form anyway and implement proper frontbuffer
tracking.

The other nasty bit that had to go was the delayed work cancle in
psr_exit. Which means a bunch of races just became a bit more likely,
but mea culpa.

v2: Fixup HAS_PSR checks, resulting in uninitialized mutex issues.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: More checks for psr.enabled

We need to make sure that no one else is using this in the
enable function and also that the work item hasn't raced
with the disabled function.

v2: Improve bisectability by moving one hunk to an earlier patch.

v3: added missing dev_priv declaration (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Lock down psr sw/hw state tracking

Make sure we track the sw side (psr.active) correctly and WARN
everywhere it might get out of sync with the hw.

v2: Fixup WARN_ON logic inversion, reported by Rodrigo.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Don't try to disable psr harder from the work item

It's disabled already except when we've raced.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Track the psr dp connector in dev_priv->psr.enabled

Trying to fish that one out through looping is a bit a locking
nightmare. So just set it and use it in the work struct.

v2:
- Don't Oops in psr_work, spotted by Rodrigo.
- Fix compile warning.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add a FIXME about drrs/psr interactions

Can't review this right now due to lack of DRRS code.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Run psr_setup unconditionally

Due to runtime pm and system s/r we need to restore hw state every
time we enable a pipe again. Hence trying to avoid that is just
pointless book-keeping which Rodrigo then tried to work around by
manually adding psr_setup calls to our resume code.

Much simpler to just remove code instead.

v2: Properly bail out of psr exit if psr isn't enabled. Spotted by
Rodrigo.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Power gating display wells during i915_pm_suspend

On VLV, after i915_pm_suspend display power wells are staying
power ungated. So, after initiating mem sleep "echo mem > /sys/power/state"
Display is staing D0 State. There might be better way/place to power gate
these wells. Also, we need to make sure that if wells are power gated due to
DPMS OFF sequence, they need not be turned off by i915_pm_suspend again.

v2: Extracted helper for intel_crtc_disable and power gating CRTC power wells.
[Daniel]

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Change-Id: I34c80da66aa24c423a5576c68aa1f3a8d0f43848
Signed-off-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: byt_gpu_freq() can be static

CC: Deepak S <deepak.s@linux.intel.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/chv: calculate rc6 residency correctly

The register to read cz count is different from vlv. Also
the counts returned from CCK_CTL1 for BSW are (ticks in 30ns - 1).
czcount_30ns of value 1 is a special case for 320Mhz.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80703
Suggested-by: Deepak S <deepak.s@linux.intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: Guo Jinxian <jinxianx.guo@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Documentation: drm: describing rotation property

Cc: damien.lespiau@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: ville.syrjala@linux.intel.com
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Documentation: drm: Removing placeholders for generic drm properties description

These property descriptions were kept as placeholder. Removing them for simplicity.

Cc: damien.lespiau@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: ville.syrjala@linux.intel.com
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add drm_rotation_simplify()

drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.

Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add drm_rect rotation functions

Add some helper functions to move drm_rects between different rotated
coordinate spaces. One function does the forward transform and
another does the inverse.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()

Use the new drm_mode_create_rotation_property() in omapdrm.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add drm_mode_create_rotation_property()

Add a function to create a standards compliant rotation property.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add support_bits parameter to drm_property_create_bitmask()

Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.

v2: Populate values[] array as non-sparse
    Make supported_bits 64bit
    Fix up omapdrm call site (Rob)

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h

The rotation property stuff should be standardized among all drivers.
Move the bits to drm_crtc.h from omap_drv.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add RP1 render P state thresholds in CHV

This is useful for userspace utilities to verify and micromanaging
the increase/decrease frequncy.

v2: Use vlv_gpu_freq to get freq (Deepak)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/chv: Add basic PM interrupt support for CHV

Enabled PM interrupt programming for CHV. Re-using gen8 code and extending same for CHV.

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: CHV GPU frequency to opcode functions

Adding chv specific fre/encode conversion.

v2: Remove generic function and platform check (Daniel)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: populate mem_freq/cz_clock for chv

We need mem_freq or cz clock for freq/opcode conversion

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add RP0/RP1/RPn render P state thresholds in VLV sysfs

This is useful for userspace utilities to verify and micromanaging the
increase/decrease frequncy.

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Read guaranteed freq for valleyview

Reading RP1 for valleyview to help us enable "pm_rps" i-g-t testcase
execution.

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Add missing static.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Call encoder->post_disable() in intel_sanitize_encoder()

VLV and CHV disable the DP port only in the .post_disable() hook, so we
need to make intel_sanitize_encoder() call that when it's trying to
disable encoders without an active pipes.

My bsw actaully hits this when an external display is connected. The
BIOS still likes to turn on the eDP port, but leaves the pipe disabled.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: ddi: enable runtime pm during dpms

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Remove now bogus comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use the cached min/min/rpe values in the vlv debugfs code

No need to re-read the hardware rps fuses when we already have all the
values tucked away in dev_priv->rps.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Don't disable PPGTT for CHV based in PCI rev

In
 commit 62942ed7279d3e06dc15ae3d47665eff3b373327
 Author: Jesse Barnes <jbarnes@virtuousgeek.org>
 Date:   Fri Jun 13 09:28:33 2014 -0700

    drm/i915/vlv: disable PPGTT on early revs v3

we forgot about CHV. IS_VALLEYVIEW() is true for CHV, so we need to
explicitly avoid disabling PPGTT on CHV.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Make the RPS interrupt generation mask handle the vlv wa

We can eliminate a lot of special case code by making the computation of
the interrupt mask be correct for all callers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Move RPS evaluation interval counters to i915->rps

Place the RPS counters inside the RPS struct.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Don't cast a pointer to void* unnecessarily

C is super happy to asign anything pointer to void *. Don't pretend
otherwise.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: don't read LVDS regs at compute_config time

We may reach this point while the machine is still runtime suspended,
so we'll hit a WARN. The other encoders also don't touch registers at
this point, so instead of waking the machine up, write some code to
keep the register always at the same state, including after we runtime
suspend/resume.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: check the power domains in intel_lvds_get_hw_state()

Just like we do for the other encoders. This should fix some WARNs
when running pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: check the power domains in ironlake_get_pipe_config()

Just like we already do in haswell_get_pipe_config(). This should
prevent some WARNs when we run pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: don't skip shared DPLL assertion on LPT

Since we now have support for shared DPLLS.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Only touch WRPLL hw state in enable/disable hooks

To be able to do this we need to separately keep track of how many
crtcs need a given WRPLL and how many actually actively use it. The
common shared dpll framework already has all this, including massive
state readout and cross checking. Which allows us to do this switch in
a fairly small patch.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Switch to common shared dpll framework for WRPLLs

Mostly this patch is one big excersize in deleting code and asserts
which are no longer needed. Note that we still abuse the shared dpll
framework a bit since we call the enable/disable functions from the
crtc mode_set and off hooks. But changing the actual hardware sequence
will be done in the next step.

Note that besides the massive amount of changes in this patch the
places and order in which the low-level WRPLL code is called is
absolutely unchanged.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: ->enable hook for WRPLLs

This time around another cute hack to pre-fill the pll->hw_state with
the right values. And also remove a bunch of checks which will be
replaced by lots more checks in the common framework.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: ->disable hook for WRPLLs

Currently still with a redudant WARN_ON in there, the common shared
dpll code will take care of this in the future.

Also we need to flip the switch for the transitional hack now to make
sure that we disable the right pll.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: State readout support for WRPLLs

Still tacked onto the side, but slowly getting there.

v2: Don't forget the debugfs file.

v3 (from Paulo): Don't forget to check the power domains.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: add POWER_DOMAIN_PLLS

And get/put it when needed. The special thing about this commit is
that it will now return false in ibx_pch_dpll_get_hw_state() in case
the power domain is not enabled. This will fix some WARNs we have when
we run pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Document that the pll->mode_set hook is optional

The WRPLLs won't use them.

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Basic shared dpll support for WRPLLs

Just filing in names and ids, but not yet officially registering them
so that the hw state cross checker doesn't completely freak out about
them. Still since we do already read out and cross check
config->shared_dpll the basics are now there to flesh out the wrpll
shared dpll implementation.

The idea is now to roll out all the callbacks step-by-step and then at
the end switch to the shared dpll framework. This way hw and sw
changes are clearly separated.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[imre: added const to hsw_ddi_pll_names (Damien)]
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Precompute static ddi_pll_sel values in encoders

This way only the dynamic WRPLL selection for hdmi ddi mode is
done in intel_ddi_pll_select.

v2: Don't clobber the precomputed values when selecting clocks fro
hdmi encoders.
v3 (from Paulo): Rebase on top of the s/IS_HASWELL/HAS_DDI/ patch.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: BDW also has special-purpose DP DDI clocks

Don't let it fall in the HAS_PCH_SPLIT() case.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: State readout and cross-checking for ddi_pll_sel

To make things a bit more manageable extract a new function for
reading out common ddi port state. This means a bit of duplication
between encoders and the core since both look at the same registers,
but doesn't seem worth to make a fuzz about.

We can also remove the state readout code in intel_ddi_setup_hw_pll_state.
That code is only called from the hardware take over and not the cross
check code, and only after the crtc state is reconstructed. So we can
rely on an accurate value of crtc->config.ddi_pll_sel already.

Compared to the old code also trust the hw state more and don't
special-case port A - we want to cross-check the actual-state, not
bake in our own assumptions about how this is supposed to all be
linked up.

v2: Make use of the read-out ddi_pll_sel in intel_ddi_clock_get.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Move ddi_pll_sel into the pipe config

Just boring sed job for preparation.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add a debugfs file for the shared dpll state

Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Move SPLL disabling into hsw_crt_post_disable

Similar to how the ->crtc_mode_set hook should touch the hardware to
enable anything the ->crtc_off hook should disable anything in the
hardware. Otherwise runtime pm for dpms will not work.

Currently the only things left int the haswell_crtc_off hook is
disabling the ddi plls. We can't move the WRPLL enabling out yet
because the current ddi pll sharing code used by the haswell code
doesn't separately track active users and overall users. This must be
fixed by porting it to the generic shared display pll framework, which
is powerful enough.

But the SPLL source is only used by the crt encoder and so can be
moved already. We only need to make sure that the ddi port E is
already off, which hsw_fdi_disable does by calling
intel_ddi_post_disable.

With this the code reorg to shuffle hsw fdi/lpt specific code into a
new hsw-specific crt encoder type is now finally complete.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Move the SPLL enabling into hsw_crt_pre_enable

The call to intel_ddi_pll_enable in haswell_crtc_mode_set is the only
function that still touches the hardware state from the crtc mode_set
callback on hsw. Since the SPLL isn't ever shared we can easily take
it out into the hsw crt encoder functions.

Temporarily we'll loose a bit of WARN_ON coverage with this, but once
the WRPLLs are switched over that will be restored. For the SPLL
selection add a WARN in the hsw fdi link training code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: ddi: move pch cleanup before encoder->post_disable

This is needed by an upcoming patch that moves the PCH/CRT PLL disabling
into the post_disable hook, after which we want to keep the modeset
sequence at its current state. At this point this won't have an effect
since the PCH/CRT post_disable hook is atm a NOP.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: ddi: move pch setup after encoder->pre_enable

This is needed by an upcoming patch that moves the PCH/CRT PLL enabling
into the pre_enable hook, after which we want to keep the modeset
sequence at its current state. At this point this won't have an effect
since the PCH/CRT pre_enable hook is atm a NOP.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Clean up WRPLL/SPLL #defines

Luckily the bit definitions match, but it's still confusing
to use one when handling the other. So sprinkle some OCD over
the #defines to make them match and use the right version in
each place.

Maybe we should unify these definitions completely, but that
can always be done sometime in the future.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove spll_refcount for hsw

SPLL would be a reference clock we could potentially share,
especially if we want to use the SSC mode. But currently we
don't, so let's rip out this complexity for a simpler conversion
to the new display pll framework.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Check hw state in assert_can_disable_lcpll

All the other checks also check hw state, so checking our software
refcounts for the plls looks a bit odd. Also this will simplify the
conversion over to the shared dpll framework, which itself has massive
amounts of checks to make sure that we never leave a display pll
enabled when we shouldn't.

So after that conversion we should stil have a good enough coverage of
asserts for entering pc8/runtime pm on hsw/bdw.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add a couple WARN()'s to catch missing locks

Add !mutex_is_locked() checks to intel_pin_and_fence_fb_obj() and
intel_unpin_fb_obj() to help catch failures to grab struct_mutex when
operating on fb objects.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add missing locking to primary plane handlers

intel_primary_plane_{setplane,disable} were lacking struct_mutex locking
around their GEM operations.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reported-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: get/put runtime PM at i915_semaphore_status

Otherwise we will print some WARNs when we read registers and the
machine is suspended.

Testcase: igt/pm_rpm/debugfs-read
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: fix D_COMP usage on BDW

On HSW, the D_COMP register can be accessed through the mailbox (read
and write) or through MMIO on a MCHBAR offset (read only). On BDW, the
access should be done through MMIO on another address. So to account
for all these cases, create hsw_read_dcomp() with the correct
implementation for reading, and also fix hsw_write_dcomp() to do the
correct thing on BDW.

With this patch, we can now get back from the PC8+ state on BDW. We
were previously getting a black screen and lots of dmesg errors.
Please notice that the bug only happens when you actually reach the
PC8+ states, not when you only allow it.

Testcase: igt/pm_rpm/rte
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: fix hsw_write_dcomp() error message

That function can be used to write anything on D_COMP, not just
disable it, so print a more appropriate message.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: remove i915_rstdby_delays debugfs entry

CHV hard hangs on reading on 0x11100

References: https://bugs.freedesktop.org/show_bug.cgi?id=80893
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: remove i915_gfxec debugfs entry

CHV hard hangs on reading on 0x112f4.

References: https://bugs.freedesktop.org/show_bug.cgi?id=80893
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: remove i915_inttoext_table debugfs entry

CHV hard hangs on reading these registers. As these have not
been used since cantiga & ilk, remove the debugfs entry.

References: https://bugs.freedesktop.org/show_bug.cgi?id=80893
Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: remove i915_delayedfreq_table debugfs entry

CHV hard hangs on reading these registers. As these have not
been used since cantiga & ilk, remove the debugfs entry.

References: https://bugs.freedesktop.org/show_bug.cgi?id=80893
Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Make use of intel_fb_obj() (v2)

This should hopefully simplify the display code slightly and also
solves at least one mistake in intel_pipe_set_base() where
to_intel_framebuffer(fb)->obj is referenced during local variable
initialization, before 'if (!fb)' gets checked.

Potential uses of this macro were identified via the following
Coccinelle patch:

        @@
        expression E;
        @@
        * to_intel_framebuffer(E)->obj

        @@
        expression E;
        identifier I;
        @@
          I = to_intel_framebuffer(E);
          ...
        * I->obj

v2: Rewrite some NULL tests in terms of the obj rather than the fb.
    Also add a WARN() if trying to pageflip with a disabled primary
    plane.  [Suggested by Chris Wilson]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Introduce intel_fb_obj() macro

Add an intel_fb_obj() macro that returns the GEM object associated with
a DRM framebuffer.  This macro is safe to call on NULL framebuffers (a
NULL object pointer will be returned in this case).

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: HWS must be in the mappable region for g33

On g33, the documentation states

"HWS_PGA:
 Format = Bits 28:12 of graphics memory address (bits 31:29 MBZ)."

which translates to that the address of the HWS must be below 256MiB,
which is conveniently the mappable aperture.

This also appears to be true (but not documented as so) for gen4 and
gen5. To generalise we force it into the low mappable region for all
non-LLC platforms. If we locate the HWS at the top of the GTT the
machine will hard hang during boot (fails on pnv, gm45, ilk and byt,
but works on snb, ivb, hsw).

v2: Add comments to explain why use PIN_MAPPABLE even though we have
    no intention of mapping the object. (Ville)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/vlv: WA for Turbo and RC6 to work together.

With RC6 enabled, BYT has an HW issue in determining the right
Gfx busyness.
WA for Turbo + RC6: Use SW based Gfx busy-ness detection to decide
on increasing/decreasing the freq. This logic will monitor C0
counters of render/media power-wells over EI period and takes
necessary action based on these values

v2: Refactor duplicate code. (Ville)

v3: Reformat the comments. (Ville)

v4: Enable required counters and remove unwanted code (Ville)

v5: Added frequency change acceleration support and remove kernel-doc
style comments. (Ville)

v6: Updated comment section and Fix w/a comment. (Ville)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use mmio flips to change tiling mode on Baytrail

For whatever reason, MI_DISPLAY_FLIP fails to change tiling mode on
Baytrail, so just use CPU driven mmio flips instead.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76176
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Disable RCS flips on Ivybridge

We currently see random GPU hangs when using RCS flips with multiple
pipes on Ivybridge. Now that we have mmio flips, we can fairly cheaply
fallback to using CPU driven flips instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77104
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Extract the actual workload submission mechanism from execbuffer

So that we isolate the legacy ringbuffer submission mechanism, which becomes
a good candidate to be abstracted away. This is prep-work for Execlists (which
will its own workload submission mechanism).

No functional changes.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Generalize intel_ring_get_tail to take a ringbuf

Again, it's low-level enough to simply take a ringbuf and nothing
else.

Trivial change.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Generalize ring_space to take a ringbuf

It's simple enough that it doesn't need to know anything about the
engine.

Trivial change.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Extract ringbuffer destroy & generalize alloc to take a ringbuf

More prep work: with Execlists, we are going to start creating a lot
of extra ringbuffers soon, so these functions are handy.

No functional changes.

v2: rename allocate/destroy_ring_buffer to alloc/destroy_ringbuffer_obj
because the name is more meaningful and to mirror a similar function in
the context world: i915_gem_alloc_context_obj(). Change suggested by Brad
Volkin.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add kerneldoc comments to the intel_context struct

A bit of background on the context elements.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Emphasize that ctx->id is merely a user handle

This is an Execlists preparatory patch, since they make context ID become an
overloaded term:

- In the software, it was used to distinguish which context userspace was
  trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
  hardware uses to it to discriminate the contexts that are submitted to
  the ELSP and inform the driver about their current status (via Context
  Switch Interrupts and Context Status Buffers).

Initially, I tried to make the different meanings converge, but it proved
impossible:

- The software ctx->id is per-filp, while the hardware one needs to be
  globally unique.
- Also, we multiplex several backing states objects per intel_context,
  and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
  ctx->id + file_priv->id + ring->id, but the fact that the hardware only
  uses 20-bits means we have to artificially limit the number of filps or
  contexts the userspace can create.

The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):

    @@
    struct intel_context c;
    @@
    - (c).id
    + c.user_handle

    @@
    struct intel_context *c;
    @@
    - (c)->id
    + c->user_handle

Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.

v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Emphasize that ctx->obj & ctx->is_initialized refer to the legacy rcs ctx

We have already advanced that Logical Ring Contexts have their own kind
of backing objects, but everything will be better explained in the Execlists
series. For now, suffice it to say that the current backing object is only
ever used with the render ring, so we're making this fact more explicit
(which is a good reason on its own).

As for the is_initialized flag, we only use to signify that the render state
has been initialized (a.k.a. golden context, a.k.a. null context). It doesn't
mean anything for the other engines, so make that distinction obvious.

Done with the following Coccinelle patch (plus manual frobbing of the struct):

    @@
    struct intel_context c;
    @@
    - (c).obj
    + c.legacy_hw_ctx.rcs_state

    @@
    struct intel_context *c;
    @@
    - (c)->obj
    + c->legacy_hw_ctx.rcs_state

    @@
    struct intel_context c;
    @@
    - (c).is_initialized
    + c.legacy_hw_ctx.initialized

    @@
    struct intel_context *c;
    @@
    - (c)->is_initialized
    + c->legacy_hw_ctx.initialized

This Execlists prep-work patch has been suggested by Chris Wilson and Daniel
Vetter separately.

Initially, it was two separate patches:
drm/i915: Rename ctx->obj to ctx->rcs_state
drm/i915: Make it obvious that ctx->id is merely a user handle

Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/id/is_initialized/ to fix the subject and resolve a
conflict in i915_gem_context_reset. Also introduce a new lctx local
variable to avoid overtly long lines.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Extract context backing object allocation

This is preparatory work for Execlists: we plan to use it later to
allocate our own context objects (since Logical Ring Contexts do
not have the same kind of backing objects).

No functional changes.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: make system freeze support depend on CONFIG_ACPI_SLEEP

To achieve further power savings during system freeze (aka connected
standby, or s0ix) we have to send a PCI_D1 opregion notification. As
the information about the state we're entering (system freeze,
suspend to ram or suspend to disk) is only available through the ACPI
subsystem, make this support depend on the relevant kconfig option.
Things will still work if this option isn't set, albeit with less than
optimial power saving.

This also fixes a compile breakage when the option is not set introduced
in

commit e5747e3adcd67ae27105003ec99fb58cba180105
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jun 12 08:35:47 2014 -0700

    drm/i915: send proper opregion notifications on suspend/resume

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Restrict GPU boost to the RCS engine

Make the assumption that media workloads are not as latency sensitive
for __wait_seqno, and that upclocking the GPU does not affect the BLT
engine. Under that assumption, we only wait to forcibly upclock the GPU
when we are stalling for results from the render pipeline.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: correct BLC vs PWM enable/disable ordering

With the new checks in place, we can see we're doing things backwards,
so fix them up per the spec.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Enable semaphores on BDW

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/bdw: poll semaphores

As Ville points out, it's possible/probable we don't actually need this.
Potentially, this validates the letter of the spec, and not the spirit.

Ville:
> I discussed this on irc w/ Ben, and I was suggesting we don't need to
> poll. Polling apparently can be used as a workaround for certain
> hardware issues, but it looks like those issues shouldn't affect us,
> for the momemnt at least. So my suggestion was to try w/o polling
> first (since there could be some power cost to polling) and add the
> poll bit if problems arise.

Rodrigo: Spec suggests this as an W/A for GT3. However semaphores didn't
worked in my BDW GT2 on Signal Mode. So pool mode is definitely needed.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: semaphore debugfs

Simple debugfs file to display the current state of semaphores. This is
useful if you want to see the state without hanging the GPU.

NOTE: This patch is optional to the series.

NOTE2: Like the GPU error state collection, the reads are currently
incoherent.

v2 (Rodrigo): * Iterate only on active rings.
          * s/ring_buffer/engine_cs.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/bdw: collect semaphore error state

Since the semaphore information is in an object, just dump it, and let
the user parse it later.

NOTE: The page being used for the semaphores are incoherent with the
CPU. No matter what I do, I cannot figure out a way to read anything but
0s. Note that the semaphore waits are indeed working.

v2: Don't print signal, and wait (they should be the same). Instead,
print sync_seqno (Chris)

v3: Free the semaphore error object (Chris)

v4: Fix semaphore offset calculation during error state collection
(Ville)

v5: VCS2 rebase
Make semaphore object error capture coding style consistent (Ville)
Do the proper math for the signal offset (Ville)

v6: Fix small conflicts on rebase and s/ring_buffer/engine_cs (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Extract semaphore error collection

v2: s/ring_buffer/engine_cs (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Implement MI decode for gen8

Ipehr just carries Dword 0 and on Gen 8, offsets are located
on Dword 2 and 3 of MI_SEMAPHORE_WAIT.

This implementation was based on Ben's work and on Ville's suggestion for Ben

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Fixup format string.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>