Jack Pham [Tue, 21 Oct 2014 23:31:10 +0000 (16:31 -0700)]
usb: dwc3: gadget: Properly initialize LINK TRB
commit
1200a82a59b6aa65758ccc92c3447b98c53cd7a2 upstream.
On ISOC endpoints the last trb_pool entry used as a
LINK TRB is not getting zeroed out correctly due to
memset being called incorrectly and in the wrong place.
If pool allocated from DMA was not zero-initialized
to begin with this will result in the size and ctrl
values being random garbage. Call memset correctly after
assignment of the trb_link pointer.
Fixes: f6bafc6a1c ("usb: dwc3: convert TRBs into bitshifts")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cyril Brulebois [Tue, 28 Oct 2014 15:42:41 +0000 (16:42 +0100)]
wireless: rt2x00: add new rt2800usb device
commit
664d6a792785cc677c2091038ce10322c8d04ae1 upstream.
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle
References: https://bugs.debian.org/766802
Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 14 Oct 2014 16:10:41 +0000 (11:10 -0500)]
USB: option: add Haier CE81B CDMA modem
commit
012eee1522318b5ccd64d277d50ac32f7e9974fe upstream.
Port layout:
0: QCDM/DIAG
1: NMEA
2: AT
3: AT/PPP
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Tue, 14 Oct 2014 08:47:37 +0000 (10:47 +0200)]
usb: option: add support for Telit LE910
commit
2d0eb862dd477c3c4f32b201254ca0b40e6f465c upstream.
Add VID/PID for Telit LE910 modem. Interfaces description is almost the
same than LE920, except that the qmi interface is number 2 (instead than
5).
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 5 Nov 2014 17:41:59 +0000 (18:41 +0100)]
USB: cdc-acm: only raise DTR on transitions from B0
commit
4473d054ceb572557954f9536731d39b20937b0c upstream.
Make sure to only raise DTR on transitions from B0 in set_termios.
Also allow set_termios to be called from open with a termios_old of
NULL. Note that DTR will not be raised prematurely in this case.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 27 Oct 2014 17:34:33 +0000 (18:34 +0100)]
USB: cdc-acm: add device id for GW Instek AFG-2225
commit
cf84a691a61606a2e7269907d3727e2d9fa148ee upstream.
Add device-id entry for GW Instek AFG-2225, which has a byte swapped
bInterfaceSubClass (0x20).
Reported-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perry Hung [Thu, 23 Oct 2014 03:31:34 +0000 (23:31 -0400)]
usb: serial: ftdi_sio: add "bricked" FTDI device PID
commit
7f2719f0003da1ad13124ef00f48d7514c79e30d upstream.
An official recent Windows driver from FTDI detects counterfeit devices
and reprograms the internal EEPROM containing the USB PID to 0, effectively
bricking the device.
Add support for this VID/PID pair to correctly bind the driver on these
devices.
See:
http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/
Signed-off-by: Perry Hung <iperry@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frans Klaver [Fri, 10 Oct 2014 09:52:08 +0000 (11:52 +0200)]
usb: serial: ftdi_sio: add Awinda Station and Dongle products
commit
edd74ffab1f6909eee400c7de8ce621870aacac9 upstream.
Add new IDs for the Xsens Awinda Station and Awinda Dongle.
While at it, order the definitions by PID and add a logical separation
between devices using Xsens' VID and those using FTDI's VID.
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathaniel Ting [Fri, 3 Oct 2014 16:01:20 +0000 (12:01 -0400)]
USB: serial: cp210x: add Silicon Labs 358x VID and PID
commit
35cc83eab097e5720a9cc0ec12bdc3a726f58381 upstream.
Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.
Signed-off-by: Nathaniel Ting <nathaniel.ting@silabs.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Thu, 16 Oct 2014 17:46:38 +0000 (13:46 -0400)]
serial: Fix divide-by-zero fault in uart_get_divisor()
commit
547039ec502076e60034eeb79611df3433a99b7d upstream.
uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.
Reproducible with:
setserial /dev/ttyS0 spd_hi base_baud 38400
Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.
Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Tue, 4 Nov 2014 17:03:16 +0000 (18:03 +0100)]
staging:iio:
ade7758: Remove "raw" from channel name
commit
b598aacc29331e7e638cd509108600e916c6331b upstream.
"raw" is a property of a channel, but should not be part of the name of
channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Tue, 4 Nov 2014 17:03:15 +0000 (18:03 +0100)]
staging:iio:
ade7758: Fix check if channels are enabled in prenable
commit
79fa64eb2ee8ccb4bcad7f54caa2699730b10b22 upstream.
We should check if a channel is enabled, not if no channels are enabled.
Fixes: 550268ca1111 ("staging:iio: scrap scan_count and ensure all drivers use active_scan_mask")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Tue, 4 Nov 2014 17:03:14 +0000 (18:03 +0100)]
staging:iio:
ade7758: Fix NULL pointer deref when enabling buffer
commit
e10554738cab4224e097c2f9d975ea781a4fcde4 upstream.
In older versions of the IIO framework it was possible to pass a completely
different set of channels to iio_buffer_register() as the one that is
assigned to the IIO device. Commit
959d2952d124 ("staging:iio: make
iio_sw_buffer_preenable much more general.") introduced a restriction that
requires that the set of channels that is passed to iio_buffer_register() is
a subset of the channels assigned to the IIO device as the IIO core will use
the list of channels that is assigned to the device to lookup a channel by
scan index in iio_compute_scan_bytes(). If it can not find the channel the
function will crash. This patch fixes the issue by making sure that the same
set of channels is assigned to the IIO device and passed to
iio_buffer_register().
Note that we need to remove the IIO_CHAN_INFO_RAW and IIO_CHAN_INFO_SCALE
info attributes from the channels since we don't actually want those to be
registered.
Fixes the following crash:
Unable to handle kernel NULL pointer dereference at virtual address
00000016
pgd =
d2094000
[
00000016] *pgd=
16e39831, *pte=
00000000, *ppte=
00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 1695 Comm: bash Not tainted
3.17.0-06329-g29461ee #9686
task:
d7768040 ti:
d5bd4000 task.ti:
d5bd4000
PC is at iio_compute_scan_bytes+0x38/0xc0
LR is at iio_compute_scan_bytes+0x34/0xc0
pc : [<
c0316de8>] lr : [<
c0316de4>] psr:
60070013
sp :
d5bd5ec0 ip :
00000000 fp :
00000000
r10:
d769f934 r9 :
00000000 r8 :
00000001
r7 :
00000000 r6 :
c8fc6240 r5 :
d769f800 r4 :
00000000
r3 :
d769f800 r2 :
00000000 r1 :
ffffffff r0 :
00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control:
18c5387d Table:
1209404a DAC:
00000015
Process bash (pid: 1695, stack limit = 0xd5bd4240)
Stack: (0xd5bd5ec0 to 0xd5bd6000)
5ec0:
d769f800 d7435640 c8fc6240 d769f984 00000000 c03175a4 d7435690 d7435640
5ee0:
d769f990 00000002 00000000 d769f800 d5bd4000 00000000 000b43a8 c03177f4
5f00:
d769f810 0162b8c8 00000002 c8fc7e00 d77f1d08 d77f1da8 c8fc7e00 c01faf1c
5f20:
00000002 c010694c c010690c d5bd5f88 00000002 c8fc6840 c8fc684c c0105e08
5f40:
00000000 00000000 d20d1580 00000002 000af408 d5bd5f88 c000de84 c00b76d4
5f60:
d20d1580 000af408 00000002 d20d1580 d20d1580 00000002 000af408 c000de84
5f80:
00000000 c00b7a44 00000000 00000000 00000002 b6ebea78 00000002 000af408
5fa0:
00000004 c000dd00 b6ebea78 00000002 00000001 000af408 00000002 00000000
5fc0:
b6ebea78 00000002 000af408 00000004 bee96a4c 000a6094 00000000 000b43a8
5fe0:
00000000 bee969cc b6e2eb77 b6e6525c 40070010 00000001 00000000 00000000
[<
c0316de8>] (iio_compute_scan_bytes) from [<
c03175a4>] (__iio_update_buffers+0x248/0x438)
[<
c03175a4>] (__iio_update_buffers) from [<
c03177f4>] (iio_buffer_store_enable+0x60/0x7c)
[<
c03177f4>] (iio_buffer_store_enable) from [<
c01faf1c>] (dev_attr_store+0x18/0x24)
[<
c01faf1c>] (dev_attr_store) from [<
c010694c>] (sysfs_kf_write+0x40/0x4c)
[<
c010694c>] (sysfs_kf_write) from [<
c0105e08>] (kernfs_fop_write+0x110/0x154)
[<
c0105e08>] (kernfs_fop_write) from [<
c00b76d4>] (vfs_write+0xbc/0x170)
[<
c00b76d4>] (vfs_write) from [<
c00b7a44>] (SyS_write+0x40/0x78)
[<
c00b7a44>] (SyS_write) from [<
c000dd00>] (ret_fast_syscall+0x0/0x30)
Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Thu, 25 Sep 2014 14:27:00 +0000 (15:27 +0100)]
staging:iio:ad5933: Drop "raw" from channel names
commit
6822ee34ad57b29a3b44df2c2829910f03c34fa4 upstream.
"raw" is the name of a channel property, but should not be part of the
channel name itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lars-Peter Clausen [Thu, 25 Sep 2014 14:27:00 +0000 (15:27 +0100)]
staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
commit
824269c5868d2a7a26417e5ef3841a27d42c6139 upstream.
In older versions of the IIO framework it was possible to pass a
completely different set of channels to iio_buffer_register() as the one
that is assigned to the IIO device. Commit
959d2952d124 ("staging:iio: make
iio_sw_buffer_preenable much more general.") introduced a restriction that
requires that the set of channels that is passed to iio_buffer_register() is
a subset of the channels assigned to the IIO device as the IIO core will use
the list of channels that is assigned to the device to lookup a channel by
scan index in iio_compute_scan_bytes(). If it can not find the channel the
function will crash. This patch fixes the issue by making sure that the same
set of channels is assigned to the IIO device and passed to
iio_buffer_register().
Fixes the follow NULL pointer derefernce kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address
00000016
pgd =
d53d0000
[
00000016] *pgd=
1534e831, *pte=
00000000, *ppte=
00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 1626 Comm: bash Not tainted
3.15.0-19969-g2a180eb-dirty #9545
task:
d6c124c0 ti:
d539a000 task.ti:
d539a000
PC is at iio_compute_scan_bytes+0x34/0xa8
LR is at iio_compute_scan_bytes+0x34/0xa8
pc : [<
c03052e4>] lr : [<
c03052e4>] psr:
60070013
sp :
d539beb8 ip :
00000001 fp :
00000000
r10:
00000002 r9 :
00000000 r8 :
00000001
r7 :
00000000 r6 :
d6dc8800 r5 :
d7571000 r4 :
00000002
r3 :
d7571000 r2 :
00000044 r1 :
00000001 r0 :
00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control:
18c5387d Table:
153d004a DAC:
00000015
Process bash (pid: 1626, stack limit = 0xd539a240)
Stack: (0xd539beb8 to 0xd539c000)
bea0:
c02fc0e4 d7571000
bec0:
d76c1640 d6dc8800 d757117c 00000000 d757112c c0305b04 d76c1690 d76c1640
bee0:
d7571188 00000002 00000000 d7571000 d539a000 00000000 000dd1c8 c0305d54
bf00:
d7571010 0160b868 00000002 c69d3900 d7573278 d7573308 c69d3900 c01ece90
bf20:
00000002 c0103fac c0103f6c d539bf88 00000002 c69d3b00 c69d3b0c c0103468
bf40:
00000000 00000000 d7694a00 00000002 000af408 d539bf88 c000dd84 c00b2f94
bf60:
d7694a00 000af408 00000002 d7694a00 d7694a00 00000002 000af408 c000dd84
bf80:
00000000 c00b32d0 00000000 00000000 00000002 b6f1aa78 00000002 000af408
bfa0:
00000004 c000dc00 b6f1aa78 00000002 00000001 000af408 00000002 00000000
bfc0:
b6f1aa78 00000002 000af408 00000004 be806a4c 000a6094 00000000 000dd1c8
bfe0:
00000000 be8069cc b6e8ab77 b6ec125c 40070010 00000001 22940489 154a5007
[<
c03052e4>] (iio_compute_scan_bytes) from [<
c0305b04>] (__iio_update_buffers+0x248/0x438)
[<
c0305b04>] (__iio_update_buffers) from [<
c0305d54>] (iio_buffer_store_enable+0x60/0x7c)
[<
c0305d54>] (iio_buffer_store_enable) from [<
c01ece90>] (dev_attr_store+0x18/0x24)
[<
c01ece90>] (dev_attr_store) from [<
c0103fac>] (sysfs_kf_write+0x40/0x4c)
[<
c0103fac>] (sysfs_kf_write) from [<
c0103468>] (kernfs_fop_write+0x110/0x154)
[<
c0103468>] (kernfs_fop_write) from [<
c00b2f94>] (vfs_write+0xd0/0x160)
[<
c00b2f94>] (vfs_write) from [<
c00b32d0>] (SyS_write+0x40/0x78)
[<
c00b32d0>] (SyS_write) from [<
c000dc00>] (ret_fast_syscall+0x0/0x30)
Code:
ea00000e e1a01008 e1a00005 ebfff6fc (
e5d0a016)
Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Mon, 20 Oct 2014 16:12:32 +0000 (18:12 +0200)]
OOM, PM: OOM killed task shouldn't escape PM suspend
commit
5695be142e203167e3cb515ef86a88424f3524eb upstream.
PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.
Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.
Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.
Changes since v1
- push the re-check loop out of freeze_processes into
check_frozen_processes and invert the condition to make the code more
readable as per Rafael
Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring)
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Tue, 21 Oct 2014 07:27:12 +0000 (09:27 +0200)]
freezer: Do not freeze tasks killed by OOM killer
commit
51fae6da640edf9d266c94f36bc806c63c301991 upstream.
Since
f660daac474c6f (oom: thaw threads if oom killed thread is frozen
before deferring) OOM killer relies on being able to thaw a frozen task
to handle OOM situation but
a3201227f803 (freezer: make freezing() test
freeze conditions in effect instead of TIF_FREEZE) has reorganized the
code and stopped clearing freeze flag in __thaw_task. This means that
the target task only wakes up and goes into the fridge again because the
freezing condition hasn't changed for it. This reintroduces the bug
fixed by
f660daac474c6f.
Fix the issue by checking for TIF_MEMDIE thread flag in
freezing_slow_path and exclude the task from freezing completely. If a
task was already frozen it would get woken by __thaw_task from OOM killer
and get out of freezer after rechecking freezing().
Changes since v1
- put TIF_MEMDIE check into freezing_slowpath rather than in __refrigerator
as per Oleg
- return __thaw_task into oom_scan_process_thread because
oom_kill_process will not wake task in the fridge because it is
sleeping uninterruptible
[mhocko@suse.cz: rewrote the changelog]
Fixes: a3201227f803 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE)
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Thu, 30 Oct 2014 14:53:16 +0000 (10:53 -0400)]
ext4: fix oops when loading block bitmap failed
commit
599a9b77ab289d85c2d5c8607624efbe1f552b0f upstream.
When we fail to load block bitmap in __ext4_new_inode() we will
dereference NULL pointer in ext4_journal_get_write_access(). So check
for error from ext4_read_block_bitmap().
Coverity-id: 989065
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Wed, 15 Oct 2014 23:16:51 +0000 (01:16 +0200)]
cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
commit
36b4bed5cd8f6e17019fa7d380e0836872c7b367 upstream.
Code which changes policy to powersave changes also max_policy_pct based on
max_freq. Code which change max_perf_pct has upper limit base on value
max_policy_pct. When policy is changing from powersave back to performance
then max_policy_pct is not changed. Which means that changing max_perf_pct is
not possible to high values if max_freq was too low in powersave policy.
Test case:
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
800000
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3300000
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
100
$ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
$ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
$ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
powersave
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
800000
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
20
$ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
$ echo
3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
$ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3300000
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
24
And now intel_pstate driver allows to set maximal value for max_perf_pct based
on max_policy_pct which is 24 for previous powersave max_freq 800000.
This patch will set default value for max_policy_pct when setting policy to
performance so it will allow to set also max value for max_perf_pct.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Thu, 30 Oct 2014 14:52:57 +0000 (10:52 -0400)]
ext4: fix overflow when updating superblock backups after resize
commit
9378c6768e4fca48971e7b6a9075bc006eda981d upstream.
When there are no meta block groups update_backups() will compute the
backup block in 32-bit arithmetics thus possibly overflowing the block
number and corrupting the filesystem. OTOH filesystems without meta
block groups larger than 16 TB should be rare. Fix the problem by doing
the counting in 64-bit arithmetics.
Coverity-id: 741252
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Tue, 14 Oct 2014 06:35:49 +0000 (02:35 -0400)]
ext4: check s_chksum_driver when looking for bg csum presence
commit
813d32f91333e4c33d5a19b67167c4bae42dae75 upstream.
Convert the ext4_has_group_desc_csum predicate to look for a checksum
driver instead of the metadata_csum flag and change the bg checksum
calculation function to look for GDT_CSUM before taking the crc16
path.
Without this patch, if we mount with ^uninit_bg,^metadata_csum and
later metadata_csum gets turned on by accident, the block group
checksum functions will incorrectly assume that checksumming is
enabled (metadata_csum) but that crc16 should be used
(!s_chksum_driver). This is totally wrong, so fix the predicate
and the checksum formula selection.
(Granted, if the metadata_csum feature bit gets enabled on a live FS
then something underhanded is going on, but we could at least avoid
writing garbage into the on-disk fields.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Sandeen [Sat, 11 Oct 2014 23:51:17 +0000 (19:51 -0400)]
ext4: fix reservation overflow in ext4_da_write_begin
commit
0ff8947fc5f700172b37cbca811a38eb9cb81e08 upstream.
Delalloc write journal reservations only reserve 1 credit,
to update the inode if necessary. However, it may happen
once in a filesystem's lifetime that a file will cross
the 2G threshold, and require the LARGE_FILE feature to
be set in the superblock as well, if it was not set already.
This overruns the transaction reservation, and can be
demonstrated simply on any ext4 filesystem without the LARGE_FILE
feature already set:
dd if=/dev/zero of=testfile bs=1 seek=
2147483646 count=1 \
conv=notrunc of=testfile
sync
dd if=/dev/zero of=testfile bs=1 seek=
2147483647 count=1 \
conv=notrunc of=testfile
leads to:
EXT4-fs: ext4_do_update_inode:4296: aborting transaction: error 28 in __ext4_handle_dirty_super
EXT4-fs error (device loop0) in ext4_do_update_inode:4301: error 28
EXT4-fs error (device loop0) in ext4_reserve_inode_write:4757: Readonly filesystem
EXT4-fs error (device loop0) in ext4_dirty_inode:4876: error 28
EXT4-fs error (device loop0) in ext4_da_write_end:2685: error 28
Adjust the number of credits based on whether the flag is
already set, and whether the current write may extend past the
LARGE_FILE limit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 6 Oct 2014 02:56:00 +0000 (22:56 -0400)]
ext4: add ext4_iget_normal() which is to be used for dir tree lookups
commit
f4bb2981024fc91b23b4d09a8817c415396dbabb upstream.
If there is a corrupted file system which has directory entries that
point at reserved, metadata inodes, prohibit them from being used by
treating them the same way we treat Boot Loader inodes --- that is,
mark them to be bad inodes. This prohibits them from being opened,
deleted, or modified via chmod, chown, utimes, etc.
In particular, this prevents a corrupted file system which has a
directory entry which points at the journal inode from being deleted
and its blocks released, after which point Much Hilarity Ensues.
Reported-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Monakhov [Fri, 3 Oct 2014 16:47:23 +0000 (12:47 -0400)]
ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
commit
3e67cfad22230ebed85c56cbe413876f33fea82b upstream.
Otherwise this provokes complain like follows:
WARNING: CPU: 12 PID: 5795 at fs/ext4/ext4_jbd2.c:48 ext4_journal_check_start+0x4e/0xa0()
Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 5795 Comm: python Not tainted
3.17.0-rc2-00175-gae5344f #158
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.
061320111235 06/13/2011
0000000000000030 ffff8808116cfd28 ffffffff815c7dfc 0000000000000030
0000000000000000 ffff8808116cfd68 ffffffff8106ce8c ffff8808116cfdc8
ffff880813b16000 ffff880806ad6ae8 ffffffff81202008 0000000000000000
Call Trace:
[<
ffffffff815c7dfc>] dump_stack+0x51/0x6d
[<
ffffffff8106ce8c>] warn_slowpath_common+0x8c/0xc0
[<
ffffffff81202008>] ? ext4_ioctl+0x9e8/0xeb0
[<
ffffffff8106ceda>] warn_slowpath_null+0x1a/0x20
[<
ffffffff8122867e>] ext4_journal_check_start+0x4e/0xa0
[<
ffffffff81228c10>] __ext4_journal_start_sb+0x90/0x110
[<
ffffffff81202008>] ext4_ioctl+0x9e8/0xeb0
[<
ffffffff8107b0bd>] ? ptrace_stop+0x24d/0x2f0
[<
ffffffff81088530>] ? alloc_pid+0x480/0x480
[<
ffffffff8107b1f2>] ? ptrace_do_notify+0x92/0xb0
[<
ffffffff81186545>] do_vfs_ioctl+0x4e5/0x550
[<
ffffffff815cdbcb>] ? _raw_spin_unlock_irq+0x2b/0x40
[<
ffffffff81186603>] SyS_ioctl+0x53/0x80
[<
ffffffff815ce2ce>] tracesys+0xd0/0xd5
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Thu, 18 Sep 2014 05:12:15 +0000 (01:12 -0400)]
ext4: don't check quota format when there are no quota files
commit
279bf6d390933d5353ab298fcc306c391a961469 upstream.
The check whether quota format is set even though there are no
quota files with journalled quota is pointless and it actually
makes it impossible to turn off journalled quotas (as there's
no way to unset journalled quota format). Just remove the check.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Tue, 16 Sep 2014 18:34:59 +0000 (14:34 -0400)]
ext4: check EA value offset when loading
commit
a0626e75954078cfacddb00a4545dde821170bc5 upstream.
When loading extended attributes, check each entry's value offset to
make sure it doesn't collide with the entries.
Without this check it is easy to crash the kernel by mounting a
malicious FS containing a file with an EA wherein e_value_offs = 0 and
e_value_size > 0 and then deleting the EA, which corrupts the name
list.
(See the f_ea_value_crash test's FS image in e2fsprogs for an example.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Tue, 16 Sep 2014 18:43:09 +0000 (14:43 -0400)]
jbd2: free bh when descriptor block checksum fails
commit
064d83892e9ba547f7d4eae22cbca066d95210ce upstream.
Free the buffer head if the journal descriptor block fails checksum
verification.
This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum
verify error in do_one_pass".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Daney [Mon, 20 Oct 2014 22:34:23 +0000 (15:34 -0700)]
MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
commit
9e0f162a36914937a937358fcb45e0609ef2bfc4 upstream.
In commit
8393c524a25609 (MIPS: tlbex: Fix a missing statement for
HUGETLB), the TLB Refill handler was fixed so that non-OCTEON targets
would work properly with huge pages. The change was incorrect in that
it broke the OCTEON case.
The problem is shown here:
xxx0:
df7a0000 ld k0,0(k1)
.
.
.
xxxc0:
df610000 ld at,0(k1)
xxxc4:
335a0ff0 andi k0,k0,0xff0
xxxc8:
e825ffcd bbit1 at,0x5,0x0
xxxcc:
003ad82d daddu k1,at,k0
.
.
.
In the non-octeon case there is a destructive test for the huge PTE
bit, and then at 0, $k0 is reloaded (that is what the
8393c524a25609
patch added).
In the octeon case, we modify k1 in the branch delay slot, but we
never need k0 again, so the new load is not needed, but since k1 is
modified, if we do the load, we load from a garbage location and then
get a nested TLB Refill, which is seen in userspace as either SIGBUS
or SIGSEGV (depending on the garbage).
The real fix is to only do this reloading if it is needed, and never
where it is harmful.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Bellinger [Sat, 4 Oct 2014 04:23:15 +0000 (04:23 +0000)]
target: Fix APTPL metadata handling for dynamic MappedLUNs
commit
e24805637d2d270d7975502e9024d473de86afdb upstream.
This patch fixes a bug in handling of SPC-3 PR Activate Persistence
across Target Power Loss (APTPL) logic where re-creation of state for
MappedLUNs from dynamically generated NodeACLs did not occur during
I_T Nexus establishment.
It adds the missing core_scsi3_check_aptpl_registration() call during
core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in
order to replay any pre-loaded APTPL metadata state associated with
the newly connected SCSI Initiator Port.
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quinn Tran [Thu, 25 Sep 2014 10:22:28 +0000 (06:22 -0400)]
target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE
commit
082f58ac4a48d3f5cb4597232cb2ac6823a96f43 upstream.
During temporary resource starvation at lower transport layer, command
is placed on queue full retry path, which expose this problem. The TCM
queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same
cmd twice to lower layer. The 1st time led to cmd normal free path.
The 2nd time cause Null pointer access.
This regression bug was originally introduced v3.1-rc code in the
following commit:
commit
e057f53308a5f071556ee80586b99ee755bf07f5
Author: Christoph Hellwig <hch@infradead.org>
Date: Mon Oct 17 13:56:41 2011 -0400
target: remove the transport_qf_callback se_cmd callback
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joern Engel [Fri, 3 Oct 2014 21:35:56 +0000 (14:35 -0700)]
qla_target: don't delete changed nacls
commit
f4c24db1b7ad0ce84409e15744d26c6f86a96840 upstream.
The code is currently riddled with "drop the hardware_lock to avoid a
deadlock" bugs that expose races. One of those races seems to expose a
valid warning in tcm_qla2xxx_clear_nacl_from_fcport_map. Add some
bandaid to it.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Kolesov [Thu, 25 Sep 2014 09:23:24 +0000 (13:23 +0400)]
ARC: Update order of registers in KGDB to match GDB 7.5
commit
ebc0c74e76cec9c4dd860eb0ca1c0b39dc63c482 upstream.
Order of registers has changed in GDB moving from 6.8 to 7.5. This patch
updates KGDB to work properly with GDB 7.5, though makes it incompatible
with 6.8.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineet Gupta [Fri, 20 Jun 2014 10:54:49 +0000 (16:24 +0530)]
ARC: [nsimosci] Allow "headless" models to boot
commit
5c05483e2db91890faa9a7be0a831701a3f442d6 upstream.
There are certain test configuration of virtual platform which don't
have any real console device (uart/pgu). So add tty0 as a fallback console
device to allow system to boot and be accessible via telnet
Otherwise with ttyS0 as only console, but 8250 disabled in kernel build,
init chokes.
Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nadav Amit [Thu, 18 Sep 2014 19:39:38 +0000 (22:39 +0300)]
KVM: x86: Emulator fixes for eip canonical checks on near branches
commit
234f3ce485d54017f15cf5e0699cff4100121601 upstream.
Before changing rip (during jmp, call, ret, etc.) the target should be asserted
to be canonical one, as real CPUs do. During sysret, both target rsp and rip
should be canonical. If any of these values is noncanonical, a #GP exception
should occur. The exception to this rule are syscall and sysenter instructions
in which the assigned rip is checked during the assignment to the relevant
MSRs.
This patch fixes the emulator to behave as real CPUs do for near branches.
Far branches are handled by the next patch.
This fixes CVE-2014-3647.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nadav Amit [Thu, 18 Sep 2014 19:39:37 +0000 (22:39 +0300)]
KVM: x86: Fix wrong masking on relative jump/call
commit
05c83ec9b73c8124555b706f6af777b10adf0862 upstream.
Relative jumps and calls do the masking according to the operand size, and not
according to the address size as the KVM emulator does today.
This patch fixes KVM behavior.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Thu, 18 Sep 2014 13:21:16 +0000 (16:21 +0300)]
kvm: x86: don't kill guest on unknown exit reason
commit
2bc19dc3754fc066c43799659f0d848631c44cfe upstream.
KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was
triggered by a priveledged application. Let's not kill the guest: WARN
and inject #UD instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nadav Amit [Tue, 16 Sep 2014 00:24:05 +0000 (03:24 +0300)]
KVM: x86: Check non-canonical addresses upon WRMSR
commit
854e8bb1aa06c578c2c9145fa6bfe3680ef63b23 upstream.
Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is
written to certain MSRs. The behavior is "almost" identical for AMD and Intel
(ignoring MSRs that are not implemented in either architecture since they would
anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
non-canonical address is written on Intel but not on AMD (which ignores the top
32-bits).
Accordingly, this patch injects a #GP on the MSRs which behave identically on
Intel and AMD. To eliminate the differences between the architecutres, the
value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to
canonical value before writing instead of injecting a #GP.
Some references from Intel and AMD manuals:
According to Intel SDM description of WRMSR instruction #GP is expected on
WRMSR "If the source register contains a non-canonical address and ECX
specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE,
IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP."
According to AMD manual instruction manual:
LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the
LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical
form, a general-protection exception (#GP) occurs."
IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the
base field must be in canonical form or a #GP fault will occur."
IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must
be in canonical form."
This patch fixes CVE-2014-3610.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Honig [Wed, 27 Aug 2014 21:42:54 +0000 (14:42 -0700)]
KVM: x86: Improve thread safety in pit
commit
2febc839133280d5a5e8e1179c94ea674489dae2 upstream.
There's a race condition in the PIT emulation code in KVM. In
__kvm_migrate_pit_timer the pit_timer object is accessed without
synchronization. If the race condition occurs at the wrong time this
can crash the host kernel.
This fixes CVE-2014-3611.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Honig [Wed, 27 Aug 2014 18:16:44 +0000 (11:16 -0700)]
KVM: x86: Prevent host from panicking on shared MSR writes.
commit
8b3c3104c3f4f706e99365c3e0d2aa61b95f969f upstream.
The previous patch blocked invalid writes directly when the MSR
is written. As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.
Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Casasnovas [Fri, 17 Oct 2014 20:55:59 +0000 (22:55 +0200)]
kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
commit
3d32e4dbe71374a6780eaf51d719d76f9a9bf22f upstream.
The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.
This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.
This was introduced by commit
350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.
This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.
Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.
Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)")
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Reviewed-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Axel Lin [Fri, 8 Aug 2014 13:32:56 +0000 (10:32 -0300)]
media: tda7432: Fix setting TDA7432_MUTE bit for TDA7432_RF register
commit
91ba0e59babdb3c7aca836a65f1095b3eaff7b06 upstream.
Fix a copy-paste bug when converting to the control framework.
Fixes: commit 5d478e0de871 ("[media] tda7432: convert to the control framework")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ulrich Eckhardt [Fri, 10 Oct 2014 17:19:12 +0000 (14:19 -0300)]
media: ds3000: fix LNB supply voltage on Tevii S480 on initialization
commit
8c5bcded11cb607b1bb5920de3b9c882136d27db upstream.
The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not
automatically power down. This blocks other receivers connected
to a satellite channel router (EN50494), since the receivers can not send the
required DiSEqC sequences when the Tevii card is connected to a the same SCR.
This patch switches off the LNB supply voltage on initialization of the frontend.
[mchehab@osg.samsung.com: add a comment about why we're explicitly
turning off voltage at device init]
Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Schaefer [Sat, 9 Aug 2014 09:37:20 +0000 (06:37 -0300)]
media: em28xx-v4l: give back all active video buffers to the vb2 core properly on streaming stop
commit
627530c32a43283474e9dd3e954519410ffa033a upstream.
When a new video frame is started, the driver takes the next video buffer from
the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf
for further processing.
On streaming stop we currently only give back the pending buffers from the list
but not the ones which are currently processed.
This causes the following warning from the vb2 core since kernel 3.15:
...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]()
[...]
Call Trace:
[<
c0769c46>] dump_stack+0x48/0x69
[<
c0245b69>] warn_slowpath_common+0x79/0x90
[<
f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
[<
f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
[<
c0245bfd>] warn_slowpath_null+0x1d/0x20
[<
f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
[<
f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core]
[<
f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core]
[<
f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core]
[<
f8e45895>] v4l_streamoff+0x15/0x20 [videodev]
[<
f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev]
[<
f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
[<
f8e48c63>] video_usercopy+0x203/0x5a0 [videodev]
[<
f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
[<
c039d0e7>] ? fsnotify+0x1e7/0x2b0
[<
f8e49012>] video_ioctl2+0x12/0x20 [videodev]
[<
f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
[<
f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev]
[<
f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev]
[<
c0378de2>] do_vfs_ioctl+0x2e2/0x4d0
[<
c0368eec>] ? vfs_write+0x13c/0x1c0
[<
c0369a8f>] ? vfs_writev+0x2f/0x50
[<
c0379028>] SyS_ioctl+0x58/0x80
[<
c076fff3>] sysenter_do_call+0x12/0x12
---[ end trace
5545f934409f13f4 ]---
...
Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled
this long standing issue and who has investigated it further.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej Matraszek [Mon, 15 Sep 2014 08:14:48 +0000 (05:14 -0300)]
media: v4l2-common: fix overflow in v4l_bound_align_image()
commit
3bacc10cd4a85bc70bc0b6c001d3bf995c7fe04c upstream.
Fix clamp_align() used in v4l_bound_align_image() to prevent overflow
when passed large value like UINT32_MAX.
In the current implementation:
clamp_align(UINT32_MAX, 8, 8192, 3)
returns 8, because in line:
x = (x + (1 << (align - 1))) & mask;
x overflows to (-1 + 4) & 0x7 = 3, while expected value is 8192.
v4l_bound_align_image() is heavily used in VIDIOC_S_FMT and
VIDIOC_SUBDEV_S_FMT ioctls handlers, and documentation of the latter
explicitly states that:
"The modified format should be as close as possible to the original
request."
-- http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-subdev-g-fmt.html
Thus one would expect, that passing UINT32_MAX as format width and
height will result in setting maximum possible resolution for the
device. Particularly, when the driver doesn't support
VIDIOC_ENUM_FRAMESIZES ioctl, which is common in the codebase.
Fixes changeset:
b0d3159be9a3
Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Mon, 8 Sep 2014 00:33:32 +0000 (10:33 +1000)]
drm/nouveau/bios: memset dcb struct to zero before parsing
commit
595d373f1e9c9ce0fc946457fdb488e8a58972cd upstream.
Fixes type/mask calculation being based on uninitialised data for VGA
outputs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:15 +0000 (09:51 -0300)]
drm/tilcdc: Fix the error path in tilcdc_load()
commit
b478e336b3e75505707a11e78ef8b964ef0a03af upstream.
The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().
To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: 3a49012224ca ("drm/tilcdc: panel: fix leak when unloading the module")
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Herrenschmidt [Tue, 7 Oct 2014 08:04:58 +0000 (19:04 +1100)]
drm/ast: Fix HW cursor image
commit
1e99cfa8de0f0879091e33cd65fd60418d006ad9 upstream.
The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 24 Oct 2014 21:55:24 +0000 (14:55 -0700)]
Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544
commit
993b3a3f80a7842a48cd46c2b41e1b3ef6302468 upstream.
These models need i8042.notimeout, otherwise the touchpad will not work.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sat, 11 Oct 2014 18:27:37 +0000 (11:27 -0700)]
Input: i8042 - add noloop quirk for Asus X750LN
commit
9ff84a17302aeb8913ff244ecc0d8f9d219fecb5 upstream.
Without this the aux port does not get detected, and consequently the
touchpad will not work.
https://bugzilla.redhat.com/show_bug.cgi?id=
1110011
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Tue, 16 Sep 2014 16:40:26 +0000 (12:40 -0400)]
framebuffer: fix border color
commit
f74a289b9480648a654e5afd8458c2263c03a1e1 upstream.
The framebuffer code uses the current background color to fill the border
when switching consoles, however, this results in inconsistent behavior.
For example:
- start Midnigh Commander
- the border is black
- switch to another console and switch back
- the border is cyan
- type something into the command line in mc
- the border is cyan
- switch to another console and switch back
- the border is black
- press F9 to go to menu
- the border is black
- switch to another console and switch back
- the border is dark blue
When switching to a console with Midnight Commander, the border is random
color that was left selected by the slang subsystem.
This patch fixes this inconsistency by always using black as the
background color when switching consoles.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prarit Bhargava [Mon, 13 Oct 2014 16:21:39 +0000 (02:51 +1030)]
modules, lock around setting of MODULE_STATE_UNFORMED
commit
d3051b489aa81ca9ba62af366149ef42b8dae97c upstream.
A panic was seen in the following sitation.
There are two threads running on the system. The first thread is a system
monitoring thread that is reading /proc/modules. The second thread is
loading and unloading a module (in this example I'm using my simple
dummy-module.ko). Note, in the "real world" this occurred with the qlogic
driver module.
When doing this, the following panic occurred:
------------[ cut here ]------------
kernel BUG at kernel/module.c:3739!
invalid opcode: 0000 [#1] SMP
Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module]
CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ #7
Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.
1311111329 11/11/2013
task:
ffff8807fd2d8000 ti:
ffff88080fa7c000 task.ti:
ffff88080fa7c000
RIP: 0010:[<
ffffffff810d64c5>] [<
ffffffff810d64c5>] module_flags+0xb5/0xc0
RSP: 0018:
ffff88080fa7fe18 EFLAGS:
00010246
RAX:
0000000000000003 RBX:
ffffffffa03b5200 RCX:
0000000000000000
RDX:
0000000000001000 RSI:
ffff88080fa7fe38 RDI:
ffffffffa03b5000
RBP:
ffff88080fa7fe28 R08:
0000000000000010 R09:
0000000000000000
R10:
0000000000000000 R11:
000000000000000f R12:
ffffffffa03b5000
R13:
ffffffffa03b5008 R14:
ffffffffa03b5200 R15:
ffffffffa03b5000
FS:
00007f6ae57ef740(0000) GS:
ffff88101e7a0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000404f70 CR3:
0000000ffed48000 CR4:
00000000001407e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Stack:
ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c
ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00
ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0
Call Trace:
[<
ffffffff810d666c>] m_show+0x19c/0x1e0
[<
ffffffff811e4d7e>] seq_read+0x16e/0x3b0
[<
ffffffff812281ed>] proc_reg_read+0x3d/0x80
[<
ffffffff811c0f2c>] vfs_read+0x9c/0x170
[<
ffffffff811c1a58>] SyS_read+0x58/0xb0
[<
ffffffff81605829>] system_call_fastpath+0x16/0x1b
Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
RIP [<
ffffffff810d64c5>] module_flags+0xb5/0xc0
RSP <
ffff88080fa7fe18>
Consider the two processes running on the system.
CPU 0 (/proc/modules reader)
CPU 1 (loading/unloading module)
CPU 0 opens /proc/modules, and starts displaying data for each module by
traversing the modules list via fs/seq_file.c:seq_open() and
fs/seq_file.c:seq_read(). For each module in the modules list, seq_read
does
op->start() <-- this is a pointer to m_start()
op->show() <- this is a pointer to m_show()
op->stop() <-- this is a pointer to m_stop()
The m_start(), m_show(), and m_stop() module functions are defined in
kernel/module.c. The m_start() and m_stop() functions acquire and release
the module_mutex respectively.
ie) When reading /proc/modules, the module_mutex is acquired and released
for each module.
m_show() is called with the module_mutex held. It accesses the module
struct data and attempts to write out module data. It is in this code
path that the above BUG_ON() warning is encountered, specifically m_show()
calls
static char *module_flags(struct module *mod, char *buf)
{
int bx = 0;
BUG_ON(mod->state == MODULE_STATE_UNFORMED);
...
The other thread, CPU 1, in unloading the module calls the syscall
delete_module() defined in kernel/module.c. The module_mutex is acquired
for a short time, and then released. free_module() is called without the
module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED,
also without the module_mutex. Some additional code is called and then the
module_mutex is reacquired to remove the module from the modules list:
/* Now we can delete it from the lists */
mutex_lock(&module_mutex);
stop_machine(__unlink_module, mod, NULL);
mutex_unlock(&module_mutex);
This is the sequence of events that leads to the panic.
CPU 1 is removing dummy_module via delete_module(). It acquires the
module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to
MODULE_STATE_UNFORMED yet.
CPU 0, which is reading the /proc/modules, acquires the module_mutex and
acquires a pointer to the dummy_module which is still in the modules list.
CPU 0 calls m_show for dummy_module. The check in m_show() for
MODULE_STATE_UNFORMED passed for dummy_module even though it is being
torn down.
Meanwhile CPU 1, which has been continuing to remove dummy_module without
holding the module_mutex, now calls free_module() and sets
dummy_module->state to MODULE_STATE_UNFORMED.
CPU 0 now calls module_flags() with dummy_module and ...
static char *module_flags(struct module *mod, char *buf)
{
int bx = 0;
BUG_ON(mod->state == MODULE_STATE_UNFORMED);
and BOOM.
Acquire and release the module_mutex lock around the setting of
MODULE_STATE_UNFORMED in the teardown path, which should resolve the
problem.
Testing: In the unpatched kernel I can panic the system within 1 minute by
doing
while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done
and
while (true) do cat /proc/modules; done
in separate terminals.
In the patched kernel I was able to run just over one hour without seeing
any issues. I also verified the output of panic via sysrq-c and the output
of /proc/modules looks correct for all three states for the dummy_module.
dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-)
dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE)
dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+)
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Wed, 1 Oct 2014 20:58:35 +0000 (22:58 +0200)]
dm log userspace: fix memory leak in dm_ulog_tfr_init failure path
commit
56ec16cb1e1ce46354de8511eef962a417c32c92 upstream.
If cn_add_callback() fails in dm_ulog_tfr_init(), it does not
deallocate prealloced memory but calls cn_del_callback().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Wed, 8 Oct 2014 22:26:13 +0000 (18:26 -0400)]
block: fix alignment_offset math that assumes io_min is a power-of-2
commit
b8839b8c55f3fdd60dc36abcda7e0266aff7985c upstream.
The math in both blk_stack_limits() and queue_limit_alignment_offset()
assume that a block device's io_min (aka minimum_io_size) is always a
power-of-2. Fix the math such that it works for non-power-of-2 io_min.
This issue (of alignment_offset != 0) became apparent when testing
dm-thinp with a thinp blocksize that matches a RAID6 stripesize of
1280K. Commit
fdfb4c8c1 ("dm thin: set minimum_io_size to pool's data
block size") unlocked the potential for alignment_offset != 0 due to
the dm-thin-pool's io_min possibly being a non-power-of-2.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lai Jiangshan [Thu, 18 Sep 2014 14:49:41 +0000 (16:49 +0200)]
drbd: compute the end before rb_insert_augmented()
commit
82cfb90bc99d7b7e0ec62d0505b9d4f06805d5db upstream.
Commit
98683650 "Merge branch 'drbd-8.4_ed6' into
for-3.8-drivers-drbd-8.4_ed6" switches to the new augment API, but the
new API requires that the tree is augmented before rb_insert_augmented()
is called, which is missing.
So we add the augment-code to drbd_insert_interval() when it travels the
tree up to down before rb_insert_augmented(). See the example in
include/linux/interval_tree_generic.h or Documentation/rbtree.txt.
drbd_insert_interval() may cancel the insertion when traveling, in this
case, the just added augment-code does nothing before cancel since the
@this node is already in the subtrees in this case.
CC: Michel Lespinasse <walken@google.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Tue, 30 Sep 2014 08:32:46 +0000 (09:32 +0100)]
dm bufio: update last_accessed when relinking a buffer
commit
eb76faf53b1ff7a77ce3f78cc98ad392ac70c2a0 upstream.
The 'last_accessed' member of the dm_buffer structure was only set when
the the buffer was created. This led to each buffer being discarded
after dm_bufio_max_age time even if it was used recently. In practice
this resulted in all thinp metadata being evicted soon after being read
-- this is particularly problematic for metadata intensive workloads
like multithreaded small random IO.
'last_accessed' is now updated each time the buffer is moved to the head
of the LRU list, so the buffer is now properly discarded if it was not
used in dm_bufio_max_age time.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Tue, 14 Oct 2014 00:10:29 +0000 (10:40 +1030)]
virtio_pci: fix virtio spec compliance on restore
commit
6fbc198cf623944ab60a1db6d306a4d55cdd820d upstream.
On restore, virtio pci does the following:
+ set features
+ init vqs etc - device can be used at this point!
+ set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits
This is in violation of the virtio spec, which
requires the following order:
- ACKNOWLEDGE
- DRIVER
- init vqs
- DRIVER_OK
This behaviour will break with hypervisors that assume spec compliant
behaviour. It seems like a good idea to have this patch applied to
stable branches to reduce the support butden for the hypervisors.
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Smalley [Mon, 6 Oct 2014 20:32:52 +0000 (16:32 -0400)]
selinux: fix inode security list corruption
commit
923190d32de4428afbea5e5773be86bea60a9925 upstream.
sb_finish_set_opts() can race with inode_free_security()
when initializing inode security structures for inodes
created prior to initial policy load or by the filesystem
during ->mount(). This appears to have always been
a possible race, but commit
3dc91d4 ("SELinux: Fix possible
NULL pointer dereference in selinux_inode_permission()")
made it more evident by immediately reusing the unioned
list/rcu element of the inode security structure for call_rcu()
upon an inode_free_security(). But the underlying issue
was already present before that commit as a possible use-after-free
of isec.
Shivnandan Kumar reported the list corruption and proposed
a patch to split the list and rcu elements out of the union
as separate fields of the inode_security_struct so that setting
the rcu element would not affect the list element. However,
this would merely hide the issue and not truly fix the code.
This patch instead moves up the deletion of the list entry
prior to dropping the sbsec->isec_lock initially. Then,
if the inode is dropped subsequently, there will be no further
references to the isec.
Reported-by: Shivnandan Kumar <shivnandan.k@samsung.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Valdis Kletnieks [Mon, 13 Oct 2014 03:09:08 +0000 (23:09 -0400)]
pstore: Fix duplicate {console,ftrace}-efi entries
commit
d4bf205da618bbd0b038e404d646f14e76915718 upstream.
The pstore filesystem still creates duplicate filename/inode pairs for
some pstore types. Add the id to the filename to prevent that.
Before patch:
[/sys/fs/pstore] ls -li
total 0
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
After:
[/sys/fs/pstore] ls -li
total 0
1232 -r--r--r--. 1 root root 148 Sep 29 17:09 console-efi-
141202499100000
1231 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi-
141202499200000
1230 -r--r--r--. 1 root root 148 Sep 29 17:44 console-efi-
141202705400000
1229 -r--r--r--. 1 root root 67 Sep 29 17:44 console-efi-
141202705500000
1228 -r--r--r--. 1 root root 67 Sep 29 20:42 console-efi-
141203772600000
1227 -r--r--r--. 1 root root 148 Sep 29 23:42 console-efi-
141204854900000
1226 -r--r--r--. 1 root root 67 Sep 29 23:42 console-efi-
141204855000000
1225 -r--r--r--. 1 root root 148 Sep 29 23:59 console-efi-
141204954200000
1224 -r--r--r--. 1 root root 67 Sep 29 23:59 console-efi-
141204954400000
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Ball [Thu, 4 Sep 2014 16:11:53 +0000 (17:11 +0100)]
mfd: rtsx_pcr: Fix MSI enable error handling
commit
5152970538a5e16c03bbcb9f1c780489a795ed40 upstream.
pci_enable_msi() can return failure with both positive and negative
integers -- it returns 0 for success -- but is only tested here for
"if (ret < 0)". This causes us to try to use MSI on the RTS5249 SD
reader in the Dell XPS 11 when enabling MSI failed, causing:
[ 1.737110] rtsx_pci: probe of 0000:05:00.0 failed with error -110
Reported-by: D. Jared Dominguez <Jared_Dominguez@Dell.com>
Tested-by: D. Jared Dominguez <Jared_Dominguez@Dell.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Wed, 8 Oct 2014 17:42:27 +0000 (10:42 -0700)]
mnt: Prevent pivot_root from creating a loop in the mount tree
commit
0d0826019e529f21c84687521d03f60cd241ca7d upstream.
Andy Lutomirski recently demonstrated that when chroot is used to set
the root path below the path for the new ``root'' passed to pivot_root
the pivot_root system call succeeds and leaks mounts.
In examining the code I see that starting with a new root that is
below the current root in the mount tree will result in a loop in the
mount tree after the mounts are detached and then reattached to one
another. Resulting in all kinds of ugliness including a leak of that
mounts involved in the leak of the mount loop.
Prevent this problem by ensuring that the new mount is reachable from
the current root of the mount tree.
[Added stable cc. Fixes CVE-2014-7970. --Andy]
Reported-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/87bnpmihks.fsf@x220.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Genoud [Tue, 9 Sep 2014 12:25:01 +0000 (14:25 +0200)]
UBI: add missing kmem_cache_free() in process_pool_aeb error path
commit
1bf1890e86869032099b539bc83b098be12fc5a7 upstream.
I ran into this error after a ubiupdatevol, because I forgot to backport
e9110361a9a4 UBI: fix the volumes tree sorting criteria.
UBI error: process_pool_aeb: orphaned volume in fastmap pool
UBI error: ubi_scan_fastmap: Attach by fastmap failed, doing a full scan!
kmem_cache_destroy ubi_ainf_peb_slab: Slab cache still has objects
CPU: 0 PID: 1 Comm: swapper Not tainted
3.14.18-00053-gf05cac8dbf85 #1
[<
c000d298>] (unwind_backtrace) from [<
c000baa8>] (show_stack+0x10/0x14)
[<
c000baa8>] (show_stack) from [<
c01b7a68>] (destroy_ai+0x230/0x244)
[<
c01b7a68>] (destroy_ai) from [<
c01b8fd4>] (ubi_attach+0x98/0x1ec)
[<
c01b8fd4>] (ubi_attach) from [<
c01ade90>] (ubi_attach_mtd_dev+0x2b8/0x868)
[<
c01ade90>] (ubi_attach_mtd_dev) from [<
c038b510>] (ubi_init+0x1dc/0x2ac)
[<
c038b510>] (ubi_init) from [<
c0008860>] (do_one_initcall+0x94/0x140)
[<
c0008860>] (do_one_initcall) from [<
c037aadc>] (kernel_init_freeable+0xe8/0x1b0)
[<
c037aadc>] (kernel_init_freeable) from [<
c02730ac>] (kernel_init+0x8/0xe4)
[<
c02730ac>] (kernel_init) from [<
c00093f0>] (ret_from_fork+0x14/0x24)
UBI: scanning is finished
Freeing the cache in the error path fixes the Slab error.
Tested on at91sam9g35 (3.14.18+fastmap backports)
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Wed, 27 Aug 2014 03:16:35 +0000 (23:16 -0400)]
random: add and use memzero_explicit() for clearing data
commit
d4c5efdb97773f59a2b711754ca0953f24516739 upstream.
zatimend has reported that in his environment (3.16/gcc4.8.3/corei7)
memset() calls which clear out sensitive data in extract_{buf,entropy,
entropy_user}() in random driver are being optimized away by gcc.
Add a helper memzero_explicit() (similarly as explicit_bzero() variants)
that can be used in such cases where a variable with sensitive data is
being cleared out in the end. Other use cases might also be in crypto
code. [ I have put this into lib/string.c though, as it's always built-in
and doesn't need any dependencies then. ]
Fixes kernel bugzilla: 82041
Reported-by: zatimend@hotmail.co.uk
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cesar Eduardo Barros [Tue, 26 Nov 2013 00:00:41 +0000 (22:00 -0200)]
crypto: more robust crypto_memneq
commit
fe8c8a126806fea4465c43d62a1f9d273a572bf5 upstream.
[Only use the compiler.h portion of this patch, to get the
OPTIMIZER_HIDE_VAR() macro, which we need for other -stable patches
- gregkh]
Disabling compiler optimizations can be fragile, since a new
optimization could be added to -O0 or -Os that breaks the assumptions
the code is making.
Instead of disabling compiler optimizations, use a dummy inline assembly
(based on RELOC_HIDE) to block the problematic kinds of optimization,
while still allowing other optimizations to be applied to the code.
The dummy inline assembly is added after every OR, and has the
accumulator variable as its input and output. The compiler is forced to
assume that the dummy inline assembly could both depend on the
accumulator variable and change the accumulator variable, so it is
forced to compute the value correctly before the inline assembly, and
cannot assume anything about its value after the inline assembly.
This change should be enough to make crypto_memneq work correctly (with
data-independent timing) even if it is inlined at its call sites. That
can be done later in a followup patch.
Compile-tested on x86_64.
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Thu, 9 Oct 2014 03:44:00 +0000 (23:44 -0400)]
fix misuses of f_count() in ppp and netlink
commit
24dff96a37a2ca319e75a74d3929b2de22447ca6 upstream.
we used to check for "nobody else could start doing anything with
that opened file" by checking that refcount was 2 or less - one
for descriptor table and one we'd acquired in fget() on the way to
wherever we are. That was race-prone (somebody else might have
had a reference to descriptor table and do fget() just as we'd
been checking) and it had become flat-out incorrect back when
we switched to fget_light() on those codepaths - unlike fget(),
it doesn't grab an extra reference unless the descriptor table
is shared. The same change allowed a race-free check, though -
we are safe exactly when refcount is less than 2.
It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading
to ppp one) and 2.6.17 for sendmsg() (netlink one). OTOH,
netlink hadn't grown that check until 3.9 and ppp used to live
in drivers/net, not drivers/net/ppp until 3.1. The bug existed
well before that, though, and the same fix used to apply in old
location of file.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 1 Aug 2014 19:13:40 +0000 (20:13 +0100)]
kill wbuf_queued/wbuf_dwork_lock
commit
99358a1ca53e8e6ce09423500191396f0e6584d2 upstream.
schedule_delayed_work() happening when the work is already pending is
a cheap no-op. Don't bother with ->wbuf_queued logics - it's both
broken (cancelling ->wbuf_dwork leaves it set, as spotted by Jeff Harris)
and pointless. It's cheaper to let schedule_delayed_work() handle that
case.
Reported-by: Jeff Harris <jefftharris@gmail.com>
Tested-by: Jeff Harris <jefftharris@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 28 Oct 2014 11:42:19 +0000 (12:42 +0100)]
ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode
commit
317168d0c766defd14b3d0e9c2c4a9a258b803ee upstream.
In compat mode, we copy each field of snd_pcm_status struct but don't
touch the reserved fields, and this leaves uninitialized values
there. Meanwhile the native ioctl does zero-clear the whole
structure, so we should follow the same rule in compat mode, too.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Kasatkin [Tue, 28 Oct 2014 12:28:49 +0000 (14:28 +0200)]
evm: check xattr value length and type in evm_inode_setxattr()
commit
3b1deef6b1289a99505858a3b212c5b50adf0c2f upstream.
evm_inode_setxattr() can be called with no value. The function does not
check the length so that following command can be used to produce the
kernel oops: setfattr -n security.evm FOO. This patch fixes it.
Changes in v3:
* there is no reason to return different error codes for EVM_XATTR_HMAC
and non EVM_XATTR_HMAC. Remove unnecessary test then.
Changes in v2:
* testing for validity of xattr type
[ 1106.396921] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1106.398192] IP: [<
ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.399244] PGD
29048067 PUD
290d7067 PMD 0
[ 1106.399953] Oops: 0000 [#1] SMP
[ 1106.400020] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse
[ 1106.400020] CPU: 0 PID: 3635 Comm: setxattr Not tainted 3.16.0-kds+ #2936
[ 1106.400020] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 1106.400020] task:
ffff8800291a0000 ti:
ffff88002917c000 task.ti:
ffff88002917c000
[ 1106.400020] RIP: 0010:[<
ffffffff812af7b8>] [<
ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.400020] RSP: 0018:
ffff88002917fd50 EFLAGS:
00010246
[ 1106.400020] RAX:
0000000000000000 RBX:
ffff88002917fdf8 RCX:
0000000000000000
[ 1106.400020] RDX:
0000000000000000 RSI:
ffffffff818136d3 RDI:
ffff88002917fdf8
[ 1106.400020] RBP:
ffff88002917fd68 R08:
0000000000000000 R09:
00000000003ec1df
[ 1106.400020] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8800438a0a00
[ 1106.400020] R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
[ 1106.400020] FS:
00007f7dfa7d7740(0000) GS:
ffff88005da00000(0000) knlGS:
0000000000000000
[ 1106.400020] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1106.400020] CR2:
0000000000000000 CR3:
000000003763e000 CR4:
00000000000006f0
[ 1106.400020] Stack:
[ 1106.400020]
ffff8800438a0a00 ffff88002917fdf8 0000000000000000 ffff88002917fd98
[ 1106.400020]
ffffffff812a1030 ffff8800438a0a00 ffff88002917fdf8 0000000000000000
[ 1106.400020]
0000000000000000 ffff88002917fde0 ffffffff8116d08a ffff88002917fdc8
[ 1106.400020] Call Trace:
[ 1106.400020] [<
ffffffff812a1030>] security_inode_setxattr+0x5d/0x6a
[ 1106.400020] [<
ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f
[ 1106.400020] [<
ffffffff8116d1e0>] setxattr+0x122/0x16c
[ 1106.400020] [<
ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[ 1106.400020] [<
ffffffff8114d011>] ? __sb_start_write+0x10f/0x143
[ 1106.400020] [<
ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[ 1106.400020] [<
ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f
[ 1106.400020] [<
ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0
[ 1106.400020] [<
ffffffff81529da9>] system_call_fastpath+0x16/0x1b
[ 1106.400020] Code: c3 0f 1f 44 00 00 55 48 89 e5 41 55 49 89 d5 41 54 49 89 fc 53 48 89 f3 48 c7 c6 d3 36 81 81 48 89 df e8 18 22 04 00 85 c0 75 07 <41> 80 7d 00 02 74 0d 48 89 de 4c 89 e7 e8 5a fe ff ff eb 03 83
[ 1106.400020] RIP [<
ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.400020] RSP <
ffff88002917fd50>
[ 1106.400020] CR2:
0000000000000000
[ 1106.428061] ---[ end trace
ae08331628ba3050 ]---
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Wed, 29 Oct 2014 10:53:37 +0000 (03:53 -0700)]
x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE
commit
d1cd1210834649ce1ca6bafe5ac25d2f40331343 upstream.
pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long <<
PAGE_SHIFT" will overflow for PFNs above 4GB.
Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V,
with 5GB memory assigned, can't load the netvsc driver successfully and
hence the synthetic network device can't work (we can use the kernel parameter
mem=3000M to work around the issue).
Cast pte_pfn() to phys_addr_t before shifting.
Fixes: "commit d76565344512: x86, mm: Create slow_virt_to_phys()"
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: linux-mm@kvack.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: jasowang@redhat.com
Cc: dave.hansen@intel.com
Cc: riel@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Sat, 1 Nov 2014 01:08:45 +0000 (18:08 -0700)]
x86_64, entry: Fix out of bounds read on sysenter
commit
653bc77af60911ead1f423e588f54fc2547c4957 upstream.
Rusty noticed a Really Bad Bug (tm) in my NT fix. The entry code
reads out of bounds, causing the NT fix to be unreliable. But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.
Excerpt from the crash:
[ 1.129513] RSP: 0018:
ffff88001da4bf88 EFLAGS:
00010296
2b:* f7 84 24 90 00 00 00 testl $0x4000,0x90(%rsp)
That read is deterministically above the top of the stack. I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.
Fixes: 8c7aa698baca ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: Rusty Russell <rusty@ozlabs.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Wed, 1 Oct 2014 18:49:04 +0000 (11:49 -0700)]
x86_64, entry: Filter RFLAGS.NT on entry from userspace
commit
8c7aa698baca5e8f1ba9edb68081f1e7a1abf455 upstream.
The NT flag doesn't do anything in long mode other than causing IRET
to #GP. Oddly, CPL3 code can still set NT using popf.
Entry via hardware or software interrupt clears NT automatically, so
the only relevant entries are fast syscalls.
If user code causes kernel code to run with NT set, then there's at
least some (small) chance that it could cause trouble. For example,
user code could cause a call to EFI code with NT set, and who knows
what would happen? Apparently some games on Wine sometimes do
this (!), and, if an IRET return happens, they will segfault. That
segfault cannot be handled, because signal delivery fails, too.
This patch programs the CPU to clear NT on entry via SYSCALL (both
32-bit and 64-bit, by my reading of the AMD APM), and it clears NT
in software on entry via SYSENTER.
To save a few cycles, this borrows a trick from Jan Beulich in Xen:
it checks whether NT is set before trying to clear it. As a result,
it seems to have very little effect on SYSENTER performance on my
machine.
There's another minor bug fix in here: it looks like the CFI
annotations were wrong if CONFIG_AUDITSYSCALL=n.
Testers beware: on Xen, SYSENTER with NT set turns into a GPF.
I haven't touched anything on 32-bit kernels.
The syscall mask change comes from a variant of this patch by Anish
Bhatt.
Note to stable maintainers: there is no known security issue here.
A misguided program can set NT and cause the kernel to try and fail
to deliver SIGSEGV, crashing the program. This patch fixes Far Cry
on Wine: https://bugs.winehq.org/show_bug.cgi?id=33275
Reported-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/395749a5d39a29bd3e4b35899cf3a3c1340e5595.1412189265.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin [Sat, 27 Apr 2013 23:10:11 +0000 (16:10 -0700)]
x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED
commit
1adfa76a95fe4444124a502f7cc858a39d5b8e01 upstream.
Bit 1 in the x86 EFLAGS is always set. Name the macro something that
actually tries to explain what it is all about, rather than being a
tautology.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/n/tip-f10rx5vjjm6tfnt8o1wseb3v@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Tue, 2 Sep 2014 17:57:13 +0000 (19:57 +0200)]
x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()
commit
66463db4fc5605d51c7bb81d009d5bf30a783a2c upstream.
save_xstate_sig()->drop_init_fpu() doesn't look right. setup_rt_frame()
can fail after that, in this case the next setup_rt_frame() triggered
by SIGSEGV won't save fpu simply because the old state was lost. This
obviously mean that fpu won't be restored after sys_rt_sigreturn() from
SIGSEGV handler.
Shift drop_init_fpu() into !failed branch in handle_signal().
Test-case (needs -O2):
#include <stdio.h>
#include <signal.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>
#include <pthread.h>
#include <assert.h>
volatile double D;
void test(double d)
{
int pid = getpid();
for (D = d; D == d; ) {
/* sys_tkill(pid, SIGHUP); asm to avoid save/reload
* fp regs around "C" call */
asm ("" : : "a"(200), "D"(pid), "S"(1));
asm ("syscall" : : : "ax");
}
printf("ERR!!\n");
}
void sigh(int sig)
{
}
char altstack[4096 * 10] __attribute__((aligned(4096)));
void *tfunc(void *arg)
{
for (;;) {
mprotect(altstack, sizeof(altstack), PROT_READ);
mprotect(altstack, sizeof(altstack), PROT_READ|PROT_WRITE);
}
}
int main(void)
{
stack_t st = {
.ss_sp = altstack,
.ss_size = sizeof(altstack),
.ss_flags = SS_ONSTACK,
};
struct sigaction sa = {
.sa_handler = sigh,
};
pthread_t pt;
sigaction(SIGSEGV, &sa, NULL);
sigaltstack(&st, NULL);
sa.sa_flags = SA_ONSTACK;
sigaction(SIGHUP, &sa, NULL);
pthread_create(&pt, NULL, tfunc, NULL);
test(123.456);
return 0;
}
Reported-by: Bean Anderson <bean@azulsystems.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175713.GA21646@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Tue, 2 Sep 2014 17:57:17 +0000 (19:57 +0200)]
x86, fpu: __restore_xstate_sig()->math_state_restore() needs preempt_disable()
commit
df24fb859a4e200d9324e2974229fbb7adf00aef upstream.
Add preempt_disable() + preempt_enable() around math_state_restore() in
__restore_xstate_sig(). Otherwise __switch_to() after __thread_fpu_begin()
can overwrite fpu->state we are going to restore.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175717.GA21649@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Sun, 7 Sep 2014 20:05:05 +0000 (21:05 +0100)]
x86: Reject x32 executables if x32 ABI not supported
commit
0e6d3112a4e95d55cf6dca88f298d5f4b8f29bd1 upstream.
It is currently possible to execve() an x32 executable on an x86_64
kernel that has only ia32 compat enabled. However all its syscalls
will fail, even _exit(). This usually causes it to segfault.
Change the ELF compat architecture check so that x32 executables are
rejected if we don't support the x32 ABI.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: http://lkml.kernel.org/r/1410120305.6822.9.camel@decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Thu, 2 Oct 2014 01:49:18 +0000 (21:49 -0400)]
vfs: fix data corruption when blocksize < pagesize for mmaped data
commit
90a8020278c1598fafd071736a0846b38510309c upstream.
->page_mkwrite() is used by filesystems to allocate blocks under a page
which is becoming writeably mmapped in some process' address space. This
allows a filesystem to return a page fault if there is not enough space
available, user exceeds quota or similar problem happens, rather than
silently discarding data later when writepage is called.
However VFS fails to call ->page_mkwrite() in all the cases where
filesystems need it when blocksize < pagesize. For example when
blocksize = 1024, pagesize = 4096 the following is problematic:
ftruncate(fd, 0);
pwrite(fd, buf, 1024, 0);
map = mmap(NULL, 1024, PROT_WRITE, MAP_SHARED, fd, 0);
map[0] = 'a'; ----> page_mkwrite() for index 0 is called
ftruncate(fd, 10000); /* or even pwrite(fd, buf, 1, 10000) */
mremap(map, 1024, 10000, 0);
map[4095] = 'a'; ----> no page_mkwrite() called
At the moment ->page_mkwrite() is called, filesystem can allocate only
one block for the page because i_size == 1024. Otherwise it would create
blocks beyond i_size which is generally undesirable. But later at
->writepage() time, we also need to store data at offset 4095 but we
don't have block allocated for it.
This patch introduces a helper function filesystems can use to have
->page_mkwrite() called at all the necessary moments.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artem Bityutskiy [Wed, 16 Jul 2014 12:22:29 +0000 (15:22 +0300)]
UBIFS: fix free log space calculation
commit
ba29e721eb2df6df8f33c1f248388bb037a47914 upstream.
Hu (hujianyang <hujianyang@huawei.com>) discovered an issue in the
'empty_log_bytes()' function, which calculates how many bytes are left in the
log:
"
If 'c->lhead_lnum + 1 == c->ltail_lnum' and 'c->lhead_offs == c->leb_size', 'h'
would equalent to 't' and 'empty_log_bytes()' would return 'c->log_bytes'
instead of 0.
"
At this point it is not clear what would be the consequences of this, and
whether this may lead to any problems, but this patch addresses the issue just
in case.
Tested-by: hujianyang <hujianyang@huawei.com>
Reported-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artem Bityutskiy [Sun, 29 Jun 2014 14:00:45 +0000 (17:00 +0300)]
UBIFS: fix a race condition
commit
052c28073ff26f771d44ef33952a41d18dadd255 upstream.
Hu (hujianyang@huawei.com) discovered a race condition which may lead to a
situation when UBIFS is unable to mount the file-system after an unclean
reboot. The problem is theoretical, though.
In UBIFS, we have the log, which basically a set of LEBs in a certain area. The
log has the tail and the head.
Every time user writes data to the file-system, the UBIFS journal grows, and
the log grows as well, because we append new reference nodes to the head of the
log. So the head moves forward all the time, while the log tail stays at the
same position.
At any time, the UBIFS master node points to the tail of the log. When we mount
the file-system, we scan the log, and we always start from its tail, because
this is where the master node points to. The only occasion when the tail of the
log changes is the commit operation.
The commit operation has 2 phases - "commit start" and "commit end". The former
is relatively short, and does not involve much I/O. During this phase we mostly
just build various in-memory lists of the things which have to be written to
the flash media during "commit end" phase.
During the commit start phase, what we do is we "clean" the log. Indeed, the
commit operation will index all the data in the journal, so the entire journal
"disappears", and therefore the data in the log become unneeded. So we just
move the head of the log to the next LEB, and write the CS node there. This LEB
will be the tail of the new log when the commit operation finishes.
When the "commit start" phase finishes, users may write more data to the
file-system, in parallel with the ongoing "commit end" operation. At this point
the log tail was not changed yet, it is the same as it had been before we
started the commit. The log head keeps moving forward, though.
The commit operation now needs to write the new master node, and the new master
node should point to the new log tail. After this the LEBs between the old log
tail and the new log tail can be unmapped and re-used again.
And here is the possible problem. We do 2 operations: (a) We first update the
log tail position in memory (see 'ubifs_log_end_commit()'). (b) And then we
write the master node (see the big lock of code in 'do_commit()').
But nothing prevents the log head from moving forward between (a) and (b), and
the log head may "wrap" now to the old log tail. And when the "wrap" happens,
the contends of the log tail gets erased. Now a power cut happens and we are in
trouble. We end up with the old master node pointing to the old tail, which was
erased. And replay fails because it expects the master node to point to the
correct log tail at all times.
This patch merges the abovementioned (a) and (b) operations by moving the master
node change code to the 'ubifs_log_end_commit()' function, so that it runs with
the log mutex locked, which will prevent the log from being changed benween
operations (a) and (b).
Reported-by: hujianyang <hujianyang@huawei.com>
Tested-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artem Bityutskiy [Sun, 29 Jun 2014 13:55:02 +0000 (16:55 +0300)]
UBIFS: remove mst_mutex
commit
07e19dff63e3d5d6500d831e36554ac9b1b0560e upstream.
The 'mst_mutex' is not needed since because 'ubifs_write_master()' is only
called on the mount path and commit path. The mount path is sequential and
there is no parallelism, and the commit path is also serialized - there is only
one commit going on at a time.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Sat, 17 May 2014 11:56:38 +0000 (20:56 +0900)]
fs: Fix theoretical division by 0 in super_cache_scan().
commit
475d0db742e3755c6b267f48577ff7cbb7dfda0d upstream.
total_objects could be 0 and is used as a denom.
While total_objects is a "long", total_objects == 0 unlikely happens for
3.12 and later kernels because 32-bit architectures would not be able to
hold (1 << 32) objects. However, total_objects == 0 may happen for kernels
between 3.1 and 3.11 because total_objects in prune_super() was an "int"
and (e.g.) x86_64 architecture might be able to hold (1 << 32) objects.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sun, 27 Jul 2014 17:00:41 +0000 (13:00 -0400)]
fs: make cont_expand_zero interruptible
commit
c2ca0fcd202863b14bd041a7fece2e789926c225 upstream.
This patch makes it possible to kill a process looping in
cont_expand_zero. A process may spend a lot of time in this function, so
it is desirable to be able to kill it.
It happened to me that I wanted to copy a piece data from the disk to a
file. By mistake, I used the "seek" parameter to dd instead of "skip". Due
to the "seek" parameter, dd attempted to extend the file and became stuck
doing so - the only possibility was to reset the machine or wait many
hours until the filesystem runs out of space and cont_expand_zero fails.
We need this patch to be able to terminate the process.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Tseng [Fri, 15 Aug 2014 06:06:00 +0000 (14:06 +0800)]
mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 response
commit
d1419d50c1bf711e9fd27b516a739c86b23f7cf9 upstream.
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain inconsistent CID from the
same card after resume and misidentify it as a different card.
Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2.
Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Zary [Fri, 26 Sep 2014 22:04:46 +0000 (00:04 +0200)]
libata-sff: Fix controllers with no ctl port
commit
6d8ca28fa688a9354bc9fbc935bdaeb3651b6677 upstream.
Currently, ata_sff_softreset is skipped for controllers with no ctl port.
But that also skips ata_sff_dev_classify required for device detection.
This means that libata is currently broken on controllers with no ctl port.
No device connected:
[ 1.872480] pata_isapnp 01:01.02: activated
[ 1.889823] scsi2 : pata_isapnp
[ 1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 6.888110] ata3.01: qc timeout (cmd 0xec)
[ 6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 16.888085] ata3.01: qc timeout (cmd 0xec)
[ 16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 46.888086] ata3.01: qc timeout (cmd 0xec)
[ 46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 51.888100] ata3.00: qc timeout (cmd 0xec)
[ 51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 61.888079] ata3.00: qc timeout (cmd 0xec)
[ 61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 91.888089] ata3.00: qc timeout (cmd 0xec)
[ 91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
ATAPI device connected:
[ 1.882061] pata_isapnp 01:01.02: activated
[ 1.893430] scsi2 : pata_isapnp
[ 1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 6.892107] ata3.01: qc timeout (cmd 0xec)
[ 6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 16.892079] ata3.01: qc timeout (cmd 0xec)
[ 16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 46.892079] ata3.01: qc timeout (cmd 0xec)
[ 46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[ 46.924570] ata3.00: configured for PIO0 (device error ignored)
[ 46.926295] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5
[ 46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray
[ 46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20
So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset
if the ctl port is not available.
This makes IDE port on ES968 behave correctly:
No device connected:
[ 4.670888] pata_isapnp 01:01.02: activated
[ 4.673207] scsi host2: pata_isapnp
[ 4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 7.081840] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k
ATAPI device connected:
[ 4.704362] pata_isapnp 01:01.02: activated
[ 4.706620] scsi host2: pata_isapnp
[ 4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[ 4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[ 4.888673] ata3.00: configured for PIO0 (device error ignored)
[ 4.893984] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5
[ 7.015578] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Carter [Thu, 25 Sep 2014 01:13:09 +0000 (18:13 -0700)]
pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller
commit
37017ac6849e772e67dd187ba2fbd056c4afa533 upstream.
The Broadcom OSB4 IDE Controller (vendor and device IDs: 1166:0211)
does not support 64-KB DMA transfers.
Whenever a 64-KB DMA transfer is attempted,
the transfer fails and messages similar to the following
are written to the console log:
[ 2431.851125] sr 0:0:0:0: [sr0] Unhandled sense code
[ 2431.851139] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2431.851152] sr 0:0:0:0: [sr0] Sense Key : Hardware Error [current]
[ 2431.851166] sr 0:0:0:0: [sr0] Add. Sense: Logical unit communication time-out
[ 2431.851182] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 76 f4 00 00 40 00
[ 2431.851210] end_request: I/O error, dev sr0, sector 121808
When the libata and pata_serverworks modules
are recompiled with ATA_DEBUG and ATA_VERBOSE_DEBUG defined in libata.h,
the 64-KB transfer size in the scatter-gather list can be seen
in the console log:
[ 2664.897267] sr 9:0:0:0: [sr0] Send:
[ 2664.897274] 0xf63d85e0
[ 2664.897283] sr 9:0:0:0: [sr0] CDB:
[ 2664.897288] Read(10): 28 00 00 00 7f b4 00 00 40 00
[ 2664.897319] buffer = 0xf6d6fbc0, bufflen = 131072, queuecommand 0xf81b7700
[ 2664.897331] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 7f b4 00 00 40
[ 2664.897338] ata_scsi_translate: ENTER
[ 2664.897345] ata_sg_setup: ENTER, ata1
[ 2664.897356] ata_sg_setup: 3 sg elements mapped
[ 2664.897364] ata_bmdma_fill_sg: PRD[0] = (0x66FD2000, 0xE000)
[ 2664.897371] ata_bmdma_fill_sg: PRD[1] = (0x65000000, 0x10000)
------------------------------------------------------> =======
[ 2664.897378] ata_bmdma_fill_sg: PRD[2] = (0x66A10000, 0x2000)
[ 2664.897386] ata1: ata_dev_select: ENTER, device 0, wait 1
[ 2664.897422] ata_sff_tf_load: feat 0x1 nsect 0x0 lba 0x0 0x0 0xFC
[ 2664.897428] ata_sff_tf_load: device 0xA0
[ 2664.897448] ata_sff_exec_command: ata1: cmd 0xA0
[ 2664.897457] ata_scsi_translate: EXIT
[ 2664.897462] leaving scsi_dispatch_cmnd()
[ 2664.897497] Doing sr request, dev = sr0, block = 0
[ 2664.897507] sr0 : reading 64/256 512 byte blocks.
[ 2664.897553] ata_sff_hsm_move: ata1: protocol 7 task_state 1 (dev_stat 0x58)
[ 2664.897560] atapi_send_cdb: send cdb
[ 2666.910058] ata_bmdma_port_intr: ata1: host_stat 0x64
[ 2666.910079] __ata_sff_port_intr: ata1: protocol 7 task_state 3
[ 2666.910093] ata_sff_hsm_move: ata1: protocol 7 task_state 3 (dev_stat 0x51)
[ 2666.910101] ata_sff_hsm_move: ata1: protocol 7 task_state 4 (dev_stat 0x51)
[ 2666.910129] sr 9:0:0:0: [sr0] Done:
[ 2666.910136] 0xf63d85e0 TIMEOUT
lspci shows that the driver used for the Broadcom OSB4 IDE Controller is
pata_serverworks:
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8e [Master SecP SecO PriP])
Flags: bus master, medium devsel, latency 64
[virtual] Memory at
000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at
000003f0 (type 3, non-prefetchable) [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=4]
I/O ports at 1440 [size=16]
Kernel driver in use: pata_serverworks
The pata_serverworks driver supports five distinct device IDs,
one being the OSB4 and the other four belonging to the CSB series.
The CSB series appears to support 64-KB DMA transfers,
as tests on a machine with an SAI2 motherboard
containing a Broadcom CSB5 IDE Controller (vendor and device IDs: 1166:0212)
showed no problems with 64-KB DMA transfers.
This problem was first discovered when attempting to install openSUSE
from a DVD on a machine with an STL2 motherboard.
Using the pata_serverworks module,
older releases of openSUSE will not install at all due to the timeouts.
Releases of openSUSE prior to 11.3 can be installed by disabling
the pata_serverworks module using the brokenmodules boot parameter,
which causes the serverworks module to be used instead.
Recent releases of openSUSE (12.2 and later) include better error recovery and
will install, though very slowly.
On all openSUSE releases, the problem can be recreated
on a machine containing a Broadcom OSB4 IDE Controller
by mounting an install DVD and running a command similar to the following:
find /mnt -type f -print | xargs cat > /dev/null
The patch below corrects the problem.
Similar to the other ATA drivers that do not support 64-KB DMA transfers,
the patch changes the ata_port_operations qc_prep vector to point to a routine
that breaks any 64-KB segment into two 32-KB segments and
changes the scsi_host_template sg_tablesize element to reduce by half
the number of scatter/gather elements allowed.
These two changes affect only the OSB4.
Signed-off-by: Scott Carter <ccscott@funsoft.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 21 Sep 2014 22:04:53 +0000 (15:04 -0700)]
Revert "percpu: free percpu allocation info for uniprocessor system"
commit
bb2e226b3bef596dd56be97df655d857b4603923 upstream.
This reverts commit
3189eddbcafc ("percpu: free percpu allocation info for
uniprocessor system").
The commit causes a hang with a crisv32 image. This may be an architecture
problem, but at least for now the revert is necessary to be able to boot a
crisv32 image.
Cc: Tejun Heo <tj@kernel.org>
Cc: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3189eddbcafc ("percpu: free percpu allocation info for uniprocessor system")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Coddington [Tue, 23 Sep 2014 16:26:20 +0000 (12:26 -0400)]
lockd: Try to reconnect if statd has moved
commit
173b3afceebe76fa2205b2c8808682d5b541fe3c upstream.
If rpc.statd is restarted, upcalls to monitor hosts can fail with
ECONNREFUSED. In that case force a lookup of statd's new port and retry the
upcall.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Fri, 31 Oct 2014 03:10:31 +0000 (03:10 +0000)]
drivers/net: macvtap and tun depend on INET
[ Upstream commit
de11b0e8c569b96c2cf6a811e3805b7aeef498a3 ]
These drivers now call ipv6_proxy_select_ident(), which is defined
only if CONFIG_INET is enabled. However, they have really depended
on CONFIG_INET for as long as they have allowed sending GSO packets
from userland.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
Fixes: b9fb9ee07e67 ("macvtap: add GSO/csum offload support")
Fixes: 5188cd44c55d ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Wed, 15 Oct 2014 12:24:02 +0000 (16:24 +0400)]
ipv4: dst_entry leak in ip_send_unicast_reply()
[ Upstream commit
4062090e3e5caaf55bed4523a69f26c3265cc1d2 ]
ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork
and in case errors in __ip_append_data() nobody frees stolen dst entry
Fixes: 2e77d89b2fa8 ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()")
Signed-off-by: Vasily Averin <vvs@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Morgan [Sun, 19 Oct 2014 12:05:13 +0000 (08:05 -0400)]
ax88179_178a: fix bonding failure
[ Upstream commit
95ff88688781db2f64042e69bd499e518bbb36e5 ]
The following patch fixes a bug which causes the ax88179_178a driver to be
incapable of being added to a bond.
When I brought up the issue with the bonding maintainers, they indicated
that the real problem was with the NIC driver which must return zero for
success (of setting the MAC address). I see that several other NIC drivers
follow that pattern by either simply always returing zero, or by passing
through a negative (error) result while rewriting any positive return code
to zero. With that same philisophy applied to the ax88179_178a driver, it
allows it to work correctly with the bonding driver.
I believe this is suitable for queuing in -stable, as it's a small, simple,
and obvious fix that corrects a defect with no other known workaround.
This patch is against vanilla 3.17(.0).
Signed-off-by: Ian Morgan <imorgan@primordial.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Pirko [Mon, 13 Oct 2014 14:34:10 +0000 (16:34 +0200)]
ipv4: fix nexthop attlen check in fib_nh_match
[ Upstream commit
f76936d07c4eeb36d8dbb64ebd30ab46ff85d9f7 ]
fib_nh_match does not match nexthops correctly. Example:
ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \
nexthop via 192.168.122.13 dev eth0
ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \
nexthop via 192.168.122.15 dev eth0
Del command is successful and route is removed. After this patch
applied, the route is correctly matched and result is:
RTNETLINK answers: No such process
Please consider this for stable trees as well.
Fixes: 4e902c57417c4 ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rabin Vincent [Wed, 29 Oct 2014 22:06:58 +0000 (23:06 +0100)]
tracing/syscalls: Ignore numbers outside NR_syscalls' range
commit
086ba77a6db00ed858ff07451bedee197df868c9 upstream.
ARM has some private syscalls (for example, set_tls(2)) which lie
outside the range of NR_syscalls. If any of these are called while
syscall tracing is being performed, out-of-bounds array access will
occur in the ftrace and perf sys_{enter,exit} handlers.
# trace-cmd record -e raw_syscalls:* true && trace-cmd report
...
true-653 [000] 384.675777: sys_enter: NR 192 (0, 1000, 3,
4000022,
ffffffff, 0)
true-653 [000] 384.675812: sys_exit: NR 192 =
1995915264
true-653 [000] 384.675971: sys_enter: NR 983045 (
76f74480,
76f74000,
76f74b28,
76f74480,
76f76f74, 1)
true-653 [000] 384.675988: sys_exit: NR 983045 = 0
...
# trace-cmd record -e syscalls:* true
[ 17.289329] Unable to handle kernel paging request at virtual address
aaaaaace
[ 17.289590] pgd =
9e71c000
[ 17.289696] [
aaaaaace] *pgd=
00000000
[ 17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 17.290169] Modules linked in:
[ 17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21
[ 17.290585] task:
9f4dab00 ti:
9e710000 task.ti:
9e710000
[ 17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8
[ 17.290866] LR is at syscall_trace_enter+0x124/0x184
Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers.
Commit
cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls"
added the check for less than zero, but it should have also checked
for greater than NR_syscalls.
Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in
Fixes: cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls"
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 30 Oct 2014 16:35:42 +0000 (09:35 -0700)]
Linux 3.10.59
Chao Yu [Thu, 24 Jul 2014 09:25:42 +0000 (17:25 +0800)]
ecryptfs: avoid to access NULL pointer when write metadata in xattr
commit
35425ea2492175fd39f6116481fe98b2b3ddd4ca upstream.
Christopher Head 2014-06-28 05:26:20 UTC described:
"I tried to reproduce this on 3.12.21. Instead, when I do "echo hello > foo"
in an ecryptfs mount with ecryptfs_xattr specified, I get a kernel crash:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61
PGD
d7840067 PUD
b2c3c067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: nvidia(PO)
CPU: 3 PID: 3566 Comm: bash Tainted: P O 3.12.21-gentoo-r1 #2
Hardware name: ASUSTek Computer Inc. G60JX/G60JX, BIOS 206 03/15/2010
task:
ffff8801948944c0 ti:
ffff8800bad70000 task.ti:
ffff8800bad70000
RIP: 0010:[<
ffffffff8110eb39>] [<
ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61
RSP: 0018:
ffff8800bad71c10 EFLAGS:
00010246
RAX:
00000000000181a4 RBX:
ffff880198648480 RCX:
0000000000000000
RDX:
0000000000000004 RSI:
ffff880172010450 RDI:
0000000000000000
RBP:
ffff880198490e40 R08:
0000000000000000 R09:
0000000000000000
R10:
ffff880172010450 R11:
ffffea0002c51e80 R12:
0000000000002000
R13:
000000000000001a R14:
0000000000000000 R15:
ffff880198490e40
FS:
00007ff224caa700(0000) GS:
ffff88019fcc0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
00000000bb07f000 CR4:
00000000000007e0
Stack:
ffffffff811826e8 ffff8800a39d8000 0000000000000000 000000000000001a
ffff8800a01d0000 ffff8800a39d8000 ffffffff81185fd5 ffffffff81082c2c
00000001a39d8000 53d0abbc98490e40 0000000000000037 ffff8800a39d8220
Call Trace:
[<
ffffffff811826e8>] ? ecryptfs_setxattr+0x40/0x52
[<
ffffffff81185fd5>] ? ecryptfs_write_metadata+0x1b3/0x223
[<
ffffffff81082c2c>] ? should_resched+0x5/0x23
[<
ffffffff8118322b>] ? ecryptfs_initialize_file+0xaf/0xd4
[<
ffffffff81183344>] ? ecryptfs_create+0xf4/0x142
[<
ffffffff810f8c0d>] ? vfs_create+0x48/0x71
[<
ffffffff810f9c86>] ? do_last.isra.68+0x559/0x952
[<
ffffffff810f7ce7>] ? link_path_walk+0xbd/0x458
[<
ffffffff810fa2a3>] ? path_openat+0x224/0x472
[<
ffffffff810fa7bd>] ? do_filp_open+0x2b/0x6f
[<
ffffffff81103606>] ? __alloc_fd+0xd6/0xe7
[<
ffffffff810ee6ab>] ? do_sys_open+0x65/0xe9
[<
ffffffff8157d022>] ? system_call_fastpath+0x16/0x1b
RIP [<
ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61
RSP <
ffff8800bad71c10>
CR2:
0000000000000000
---[ end trace
df9dba5f1ddb8565 ]---"
If we create a file when we mount with ecryptfs_xattr_metadata option, we will
encounter a crash in this path:
->ecryptfs_create
->ecryptfs_initialize_file
->ecryptfs_write_metadata
->ecryptfs_write_metadata_to_xattr
->ecryptfs_setxattr
->fsstack_copy_attr_all
It's because our dentry->d_inode used in fsstack_copy_attr_all is NULL, and it
will be initialized when ecryptfs_initialize_file finish.
So we should skip copying attr from lower inode when the value of ->d_inode is
invalid.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ludovic Desroches [Mon, 22 Sep 2014 13:51:33 +0000 (15:51 +0200)]
ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
commit
cfa1950e6c6b72251e80adc736af3c3d2907ab0e upstream.
When introducing support for sama5d3, the write to PMC_PCDR register has
been accidentally removed.
Reported-by: Nathalie Cyrille <nathalie.cyrille@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlad Catoi [Sat, 18 Oct 2014 22:45:41 +0000 (17:45 -0500)]
ALSA: usb-audio: Add support for Steinberg UR22 USB interface
commit
f0b127fbfdc8756eba7437ab668f3169280bd358 upstream.
Adding support for Steinberg UR22 USB interface via quirks table patch
See Ubuntu bug report:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/
1317244
Also see threads:
http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917
http://www.steinberg.net/forums/viewtopic.php?t=62290
Tested by at least 4 people judging by the threads.
Did not test MIDI interface, but audio output and capture both are
functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123
Patch applied to 3.13 Ubuntu kernel works well enough for daily use.
Signed-off-by: Vlad Catoi <vladcatoi@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 13 Oct 2014 21:18:02 +0000 (23:18 +0200)]
ALSA: emu10k1: Fix deadlock in synth voice lookup
commit
95926035b187cc9fee6fb61385b7da9c28123f74 upstream.
The emu10k1 voice allocator takes voice_lock spinlock. When there is
no empty stream available, it tries to release a voice used by synth,
and calls get_synth_voice. The callback function,
snd_emu10k1_synth_get_voice(), however, also takes the voice_lock,
thus it deadlocks.
The fix is simply removing the voice_lock holds in
snd_emu10k1_synth_get_voice(), as this is always called in the
spinlock context.
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anatol Pomozov [Fri, 17 Oct 2014 19:43:34 +0000 (12:43 -0700)]
ALSA: pcm: use the same dma mmap codepath both for arm and arm64
commit
a011e213f3700233ed2a676f1ef0a74a052d7162 upstream.
This avoids following kernel crash when try to playback on arm64
[ 107.497203] [<
ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4
[ 107.503405] [<
ffffffc0001541ac>] __do_fault+0xb0/0x498
[ 107.508565] [<
ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0
[ 107.514246] [<
ffffffc000092640>] do_page_fault+0x11c/0x310
[ 107.519738] [<
ffffffc000081100>] do_mem_abort+0x38/0x98
Tested: backported to 3.14 and tried to playback on arm64 machine
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Victor Kamensky [Tue, 14 Oct 2014 05:55:05 +0000 (06:55 +0100)]
arm64: compat: fix compat types affecting struct compat_elf_prpsinfo
commit
971a5b6fe634bb7b617d8c5f25b6a3ddbc600194 upstream.
The compat_elf_prpsinfo structure does not match the arch/arm struct
elf_pspsinfo definition. As result NT_PRPSINFO note in core file
created by arm64 kernel for aarch32 (compat) process has wrong size.
So gdb cannot display command that caused process crash.
Fix is to change size of __compat_uid_t, __compat_gid_t so it would
match size of similar fields in arch/arm case.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Thu, 18 Sep 2014 17:08:53 +0000 (20:08 +0300)]
spi: dw-mid: terminate ongoing transfers at exit
commit
8e45ef682cb31fda62ed4eeede5d9745a0a1b1e2 upstream.
Do full clean up at exit, means terminate all ongoing DMA transfers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin [Mon, 13 Oct 2014 22:51:05 +0000 (15:51 -0700)]
kernel: add support for gcc 5
commit
71458cfc782eafe4b27656e078d379a34e472adf upstream.
We're missing include/linux/compiler-gcc5.h which is required now
because gcc branched off to v5 in trunk.
Just copy the relevant bits out of include/linux/compiler-gcc4.h,
no new code is added as of now.
This fixes a build error when using gcc 5.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yann Droneaud [Thu, 9 Oct 2014 22:24:40 +0000 (15:24 -0700)]
fanotify: enable close-on-exec on events' fd when requested in fanotify_init()
commit
0b37e097a648aa71d4db1ad108001e95b69a2da4 upstream.
According to commit
80af258867648 ("fanotify: groups can specify their
f_flags for new fd"), file descriptors created as part of file access
notification events inherit flags from the event_f_flags argument passed
to syscall fanotify_init(2)[1].
Unfortunately O_CLOEXEC is currently silently ignored.
Indeed, event_f_flags are only given to dentry_open(), which only seems to
care about O_ACCMODE and O_PATH in do_dentry_open(), O_DIRECT in
open_check_o_direct() and O_LARGEFILE in generic_file_open().
It's a pity, since, according to some lookup on various search engines and
http://codesearch.debian.net/, there's already some userspace code which
use O_CLOEXEC:
- in systemd's readahead[2]:
fanotify_fd = fanotify_init(FAN_CLOEXEC|FAN_NONBLOCK, O_RDONLY|O_LARGEFILE|O_CLOEXEC|O_NOATIME);
- in clsync[3]:
#define FANOTIFY_EVFLAGS (O_LARGEFILE|O_RDONLY|O_CLOEXEC)
int fanotify_d = fanotify_init(FANOTIFY_FLAGS, FANOTIFY_EVFLAGS);
- in examples [4] from "Filesystem monitoring in the Linux
kernel" article[5] by Aleksander Morgado:
if ((fanotify_fd = fanotify_init (FAN_CLOEXEC,
O_RDONLY | O_CLOEXEC | O_LARGEFILE)) < 0)
Additionally, since commit
48149e9d3a7e ("fanotify: check file flags
passed in fanotify_init"). having O_CLOEXEC as part of fanotify_init()
second argument is expressly allowed.
So it seems expected to set close-on-exec flag on the file descriptors if
userspace is allowed to request it with O_CLOEXEC.
But Andrew Morton raised[6] the concern that enabling now close-on-exec
might break existing applications which ask for O_CLOEXEC but expect the
file descriptor to be inherited across exec().
In the other hand, as reported by Mihai Dontu[7] close-on-exec on the file
descriptor returned as part of file access notify can break applications
due to deadlock. So close-on-exec is needed for most applications.
More, applications asking for close-on-exec are likely expecting it to be
enabled, relying on O_CLOEXEC being effective. If not, it might weaken
their security, as noted by Jan Kara[8].
So this patch replaces call to macro get_unused_fd() by a call to function
get_unused_fd_flags() with event_f_flags value as argument. This way
O_CLOEXEC flag in the second argument of fanotify_init(2) syscall is
interpreted and close-on-exec get enabled when requested.
[1] http://man7.org/linux/man-pages/man2/fanotify_init.2.html
[2] http://cgit.freedesktop.org/systemd/systemd/tree/src/readahead/readahead-collect.c?id=v208#n294
[3] https://github.com/xaionaro/clsync/blob/v0.2.1/sync.c#L1631
https://github.com/xaionaro/clsync/blob/v0.2.1/configuration.h#L38
[4] http://www.lanedo.com/~aleksander/fanotify/fanotify-example.c
[5] http://www.lanedo.com/2013/filesystem-monitoring-linux-kernel/
[6] http://lkml.kernel.org/r/
20141001153621.
65e9258e65a6167bf2e4cb50@linux-foundation.org
[7] http://lkml.kernel.org/r/
20141002095046.
3715eb69@mdontu-l
[8] http://lkml.kernel.org/r/
20141002104410.GB19748@quack.suse.cz
Link: http://lkml.kernel.org/r/cover.1411562410.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Mihai Don\u021bu <mihai.dontu@gmail.com>
Cc: Pádraig Brady <P@draigBrady.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Michael Kerrisk-manpages <mtk.manpages@gmail.com>
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Richard Guy Briggs <rgb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>