firefly-linux-kernel-4.4.55.git
12 years agostaging: "rts5139" Fix typos.
Justin P. Mattock [Mon, 14 May 2012 14:25:35 +0000 (07:25 -0700)]
staging: "rts5139" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: r8712u: Remove needless test for NULL
Larry Finger [Fri, 11 May 2012 16:33:43 +0000 (11:33 -0500)]
staging: r8712u: Remove needless test for NULL

In commit ee6aeff, a swatch warning was fixed by moving some code inside
an if block that is executed only when the pointer padapter is not NULL.
In fact, padapter can never be NULL and the corect fix should have been
the removal of the test of padapter.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:dummy: Remove outdated comment
Lars-Peter Clausen [Fri, 11 May 2012 13:12:29 +0000 (15:12 +0200)]
staging:iio:dummy: Remove outdated comment

iio_device_free has to be called regardless of whether the device has been
registered or not when freeing it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add ADC driver to the at91sam9g20 dtsi
Maxime Ripard [Fri, 11 May 2012 13:35:40 +0000 (15:35 +0200)]
ARM: AT91: Add ADC driver to the at91sam9g20 dtsi

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add ADC driver to the at91sam9x5 dtsi
Maxime Ripard [Fri, 11 May 2012 13:35:39 +0000 (15:35 +0200)]
ARM: AT91: Add ADC driver to the at91sam9x5 dtsi

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add ADC driver to the at91sam9g45 dtsi
Maxime Ripard [Fri, 11 May 2012 13:35:38 +0000 (15:35 +0200)]
ARM: AT91: Add ADC driver to the at91sam9g45 dtsi

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoIIO: AT91: Add DT support to at91_adc driver
Maxime Ripard [Fri, 11 May 2012 13:35:37 +0000 (15:35 +0200)]
IIO: AT91: Add DT support to at91_adc driver

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add the ADC clock to the sam9x5 SoC file
Maxime Ripard [Fri, 11 May 2012 13:35:36 +0000 (15:35 +0200)]
ARM: AT91: Add the ADC clock to the sam9x5 SoC file

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: ADC: Add support for the AT91SAM9M10G45-EK board
Maxime Ripard [Fri, 11 May 2012 13:35:35 +0000 (15:35 +0200)]
ARM: AT91: ADC: Add support for the AT91SAM9M10G45-EK board

This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9M10G45-EK board.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add the ADC to the sam9g20ek board
Maxime Ripard [Fri, 11 May 2012 13:35:34 +0000 (15:35 +0200)]
ARM: AT91: Add the ADC to the sam9g20ek board

This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9G20-EK board.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard [Fri, 11 May 2012 13:35:33 +0000 (15:35 +0200)]
ARM: AT91: IIO: Add AT91 ADC driver.

Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK
and AT91SAM9X5 family boards.

It has support for both software and hardware triggers.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add platform data for the AT91 ADCs
Maxime Ripard [Fri, 11 May 2012 13:35:32 +0000 (15:35 +0200)]
ARM: AT91: Add platform data for the AT91 ADCs

The AT91 SoCs often embeds an ADC. This patch adds the needed
platform data to specify the informations required by the driver
to work properly.

For now, we only need the reference voltage and which channels
are available on the board.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain Amplifier
Michael Hennerich [Fri, 11 May 2012 09:36:54 +0000 (11:36 +0200)]
iio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain Amplifier

Changes since V1:

Apply review feedback:
Introduce and use IIO_CHAN_INFO_HARDWAREGAIN
Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB

Modify out of staging include paths.
Convert to new iio core API naming.

Changes since V2:

more sanity checking in write_raw

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: core: introduce IIO_CHAN_INFO_HARDWAREGAIN
Michael Hennerich [Fri, 11 May 2012 09:36:53 +0000 (11:36 +0200)]
iio: core: introduce IIO_CHAN_INFO_HARDWAREGAIN

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: core: introduce dB scle: IIO_VAL_INT_PLUS_MICRO_DB
Michael Hennerich [Fri, 11 May 2012 09:36:52 +0000 (11:36 +0200)]
iio: core: introduce dB scle: IIO_VAL_INT_PLUS_MICRO_DB

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoramster: switch over to zsmalloc and crypto interface
Dan Magenheimer [Thu, 10 May 2012 19:06:21 +0000 (12:06 -0700)]
ramster: switch over to zsmalloc and crypto interface

RAMster does many zcache-like things.  In order to avoid major
merge conflicts at 3.4, ramster used lzo1x directly for compression
and retained a local copy of xvmalloc, while zcache moved to the
new zsmalloc allocator and the crypto API.

This patch moves ramster forward to use zsmalloc and crypto.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: line6/config.h: Remove CHECKPOINT macro
Johannes Thumshirn [Thu, 10 May 2012 17:12:02 +0000 (19:12 +0200)]
staging: line6/config.h: Remove CHECKPOINT macro

Kill unused debugging macro CHECKPOINT

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: register sysfs device attributes with driver core
H Hartley Sweeten [Fri, 11 May 2012 01:05:28 +0000 (18:05 -0700)]
staging: comedi: register sysfs device attributes with driver core

Currently the sysfs device attributes are created by the comedi
core after each comedi device is created. This can lead to a race
condition where userspace gets an add event before the files are
created.

Register the device attributes with the comedi class so that the
driver core handles creating them and we avoid the race.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_free()
Anton Vorontsov [Sat, 12 May 2012 00:18:05 +0000 (17:18 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_free()

A corresponding function to persistent_ram_new().

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Make it possible to use memory outside of bootmem
Anton Vorontsov [Sat, 12 May 2012 00:17:54 +0000 (17:17 -0700)]
staging: android: persistent_ram: Make it possible to use memory outside of bootmem

This includes devices' memory (e.g. framebuffers or memory mapped
EEPROMs on a local bus), as well as the normal RAM that we don't use
for the main memory.

For the normal (but unused) ram we could use kmaps, but this assumes
highmem support, so we don't bother and just use the memory via
ioremap.

As a side effect, the following hack is possible: when used together
with pstore_ram (new ramoops) module, we can limit the normal RAM region
with mem= and then point ramoops to use the rest of the memory, e.g.

mem=128M ramoops.mem_address=0x8000000

Sure, we could just reserve the region with memblock_reserve() early in
the arch/ code, and then register a pstore_ram platform device pointing
to the reserved region. It's still a viable option if platform wants
to do so.

Also, we might want to use IO accessors in case of a real device,
but for now we don't bother (the old ramoops wasn't using it either, so
at least we don't make things worse).

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_vmap()
Anton Vorontsov [Sat, 12 May 2012 00:17:43 +0000 (17:17 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_vmap()

Factor out vmap logic out of persistent_ram_buffer_map(), this will
make the code a bit more understandable when we'll add support for
non-bootmem memory.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_new()
Anton Vorontsov [Sat, 12 May 2012 00:17:34 +0000 (17:17 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_new()

The routine just creates a persistent ram zone at a specified address.

For persistent_ram_init_ringbuffer() we'd need to add a
'struct persistent_ram' to the global list, and associate it with a
device. We don't need all this complexity in pstore_ram, so we introduce
the simple function.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_post_init()
Anton Vorontsov [Sat, 12 May 2012 00:17:25 +0000 (17:17 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_post_init()

Factor post init logic out of __persistent_ram_init(), we'll need
it for the new persistent_ram_new() routine.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopersistent_ram: Fix buffer size clamping during writes
Anton Vorontsov [Sat, 12 May 2012 00:17:17 +0000 (17:17 -0700)]
persistent_ram: Fix buffer size clamping during writes

This is a longstanding bug, almost unnoticeable when calling
persistent_ram_write() for small buffers.

But when called for large data buffers, the write routine behaves
incorrectly, as the size may never update: instead of clamping
the size to the maximum buffer size, buffer_size_add_clamp() returns
an error (which is never checked by the write routine, btw).

To fix this, we now use buffer_size_add() that actually clamps the
size to the max value.

Also remove buffer_size_add_clamp(), it is no longer needed.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Colin Cross <ccross@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopersistent_ram: Remove prz->node
Anton Vorontsov [Sat, 12 May 2012 00:17:06 +0000 (17:17 -0700)]
persistent_ram: Remove prz->node

The 'node' struct member is unused, so remove it.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: logger: Fix some sparse and whitespace issues
Tim Bird [Thu, 10 May 2012 21:22:59 +0000 (14:22 -0700)]
staging: android: logger: Fix some sparse and whitespace issues

Fix a few sparse warnings, and improve whitespace.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: logger: Allocate logs dynamically at boot (v3)
Tim Bird [Thu, 10 May 2012 22:11:36 +0000 (15:11 -0700)]
staging: android: logger: Allocate logs dynamically at boot (v3)

This changes the log initialization to be dynamic, but still
at boot time.  These changes are a predecessor to implementing
runtime allocation and freeing of logs, to make the Android logger
less hard-coded.

Change from a fixed set of static log structures, to allocation
at init time into a list.  Return proper error numbers on log
allocation failure.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: delete all duplicated endian crap from rtl8712 driver
Paul Gortmaker [Thu, 10 May 2012 03:10:54 +0000 (23:10 -0400)]
staging: delete all duplicated endian crap from rtl8712 driver

This driver had headers like big_endian.h, little_endian.h, swab.h
and yet we can throw them all in the trash can and the thing
still builds on x86-64 and ppc, just by deleting the references
to the deleted files.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12 years agostaging: wean rtl8712 off of its ancient duplicate of ip.h
Paul Gortmaker [Thu, 10 May 2012 02:53:32 +0000 (22:53 -0400)]
staging: wean rtl8712 off of its ancient duplicate of ip.h

This driver should not be carrying around ancient copies of
headers like <linux/ip.h> for its own use.  Mapping it onto
the mainline one uncovers no build issues.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12 years agostaging: wean rtl8712 off of its ancient duplicate of if_ether.h
Paul Gortmaker [Thu, 10 May 2012 02:42:45 +0000 (22:42 -0400)]
staging: wean rtl8712 off of its ancient duplicate of if_ether.h

This driver should not be carrying around ancient copies of
headers like <linux/if_ether.h> for its own use.  Mapping it
onto the mainline one uncovers no build issues.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12 years agostaging: rts5139: remove unused variable option.ww_enable
Oleksij Rempel [Thu, 10 May 2012 07:59:39 +0000 (09:59 +0200)]
staging: rts5139: remove unused variable option.ww_enable

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused variable in rts51x_chip.h
Oleksij Rempel [Thu, 10 May 2012 07:59:38 +0000 (09:59 +0200)]
staging: rts5139: remove unused variable in rts51x_chip.h

the SENSE_TYPE_FORMAT_IN_PROGRESS was checked by rts51x_scsi.c
but never set.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused variable in rts51x.h
Oleksij Rempel [Thu, 10 May 2012 07:59:37 +0000 (09:59 +0200)]
staging: rts5139: remove unused variable in rts51x.h

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused TUNE_SD18_*
Oleksij Rempel [Thu, 10 May 2012 07:59:36 +0000 (09:59 +0200)]
staging: rts5139: remove unused TUNE_SD18_*

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused polling_time variable
Oleksij Rempel [Thu, 10 May 2012 07:59:35 +0000 (09:59 +0200)]
staging: rts5139: remove unused polling_time variable

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused rcc_bug_fix_en
Oleksij Rempel [Thu, 10 May 2012 07:59:34 +0000 (09:59 +0200)]
staging: rts5139: remove unused rcc_bug_fix_en

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused rcc_fail_flag variable
Oleksij Rempel [Thu, 10 May 2012 07:59:33 +0000 (09:59 +0200)]
staging: rts5139: remove unused rcc_fail_flag variable

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused option->needs_remote_wakeup
Oleksij Rempel [Thu, 10 May 2012 07:59:32 +0000 (09:59 +0200)]
staging: rts5139: remove unused option->needs_remote_wakeup

module parametr needs_remote_wakeup sets
option->needs_remote_wakeup and
rts51x->pusb_intf->needs_remote_wakeup

the second may be used, the first one is never used

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused led_blink_speed variable
Oleksij Rempel [Thu, 10 May 2012 07:59:31 +0000 (09:59 +0200)]
staging: rts5139: remove unused led_blink_speed variable

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove disabled code in rts51x_card.c
Oleksij Rempel [Thu, 10 May 2012 07:59:30 +0000 (09:59 +0200)]
staging: rts5139: remove disabled code in rts51x_card.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in ms.c and ms_mg.c
Oleksij Rempel [Thu, 10 May 2012 07:59:29 +0000 (09:59 +0200)]
staging: rts5139: make some functions static in ms.c and ms_mg.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused xd_check_err_code in xd.c
Oleksij Rempel [Thu, 10 May 2012 07:59:28 +0000 (09:59 +0200)]
staging: rts5139: remove unused xd_check_err_code in xd.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in xd.c
Oleksij Rempel [Thu, 10 May 2012 07:59:27 +0000 (09:59 +0200)]
staging: rts5139: make some functions static in xd.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in sd_cprm.c
Oleksij Rempel [Thu, 10 May 2012 07:59:26 +0000 (09:59 +0200)]
staging: rts5139: make some functions static in sd_cprm.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in sd.*
Oleksij Rempel [Thu, 10 May 2012 07:59:25 +0000 (09:59 +0200)]
staging: rts5139: make some functions static in sd.*

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove soft_reset_sd_card in sd_cprm.c
Oleksij Rempel [Thu, 10 May 2012 07:59:24 +0000 (09:59 +0200)]
staging: rts5139: remove soft_reset_sd_card in sd_cprm.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused rts51x_reset_pipe in rts51x_transport.*
Oleksij Rempel [Thu, 10 May 2012 07:59:23 +0000 (09:59 +0200)]
staging: rts5139: remove unused rts51x_reset_pipe in rts51x_transport.*

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in rts51x_transport.*
Oleksij Rempel [Thu, 10 May 2012 07:59:22 +0000 (09:59 +0200)]
staging: rts5139: make some functions static in rts51x_transport.*

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unsued *host_info in rts51x_scsi.c
Oleksij Rempel [Thu, 10 May 2012 07:59:21 +0000 (09:59 +0200)]
staging: rts5139: remove unsued *host_info in rts51x_scsi.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in rts51x_scsi.c
Oleksij Rempel [Thu, 10 May 2012 07:59:20 +0000 (09:59 +0200)]
staging: rts5139: make some functions static in rts51x_scsi.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: dereferencing freed memory
Dan Carpenter [Thu, 10 May 2012 15:19:04 +0000 (18:19 +0300)]
Staging: ipack: dereferencing freed memory

We free "dev" then dereference it on the next line.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: returning a freed pointer
Dan Carpenter [Thu, 10 May 2012 15:18:36 +0000 (18:18 +0300)]
Staging: ipack: returning a freed pointer

If ipack_device_register() returns an error, then we returned a freed
pointer.  The caller doesn't use it, but it means we return success to
the user instead of returning an error code.

I kind of rewrote the error handling in this function as a cleanup.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: add support for IP-OCTAL mezzanine board
Samuel Iglesias Gonsalvez [Wed, 9 May 2012 13:27:21 +0000 (15:27 +0200)]
Staging: ipack: add support for IP-OCTAL mezzanine board

IP-OCTAL is a 8-channels serial port device. There are several models one per
each standard: RS-232, RS-422, RS-485.

This driver can manage all of them.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: added support for the TEWS TPCI-200 carrier board
Samuel Iglesias Gonsalvez [Wed, 9 May 2012 13:27:20 +0000 (15:27 +0200)]
Staging: ipack: added support for the TEWS TPCI-200 carrier board

Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and
IndustryPack bus.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: IndustryPack bus for the Linux Kernel
Samuel Iglesias Gonsalvez [Wed, 9 May 2012 13:27:19 +0000 (15:27 +0200)]
Staging: IndustryPack bus for the Linux Kernel

Add IndustryPack bus support for the Linux Kernel.

This is a virtual bus that allows to perform all the operations between
carrier and mezzanine boards.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: update MAINTAINERS file
Tomas Winkler [Wed, 9 May 2012 13:39:02 +0000 (16:39 +0300)]
mei: update MAINTAINERS file

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: update Documentation/ioctl/ioctl-number.txt
Tomas Winkler [Wed, 9 May 2012 13:39:01 +0000 (16:39 +0300)]
mei: update Documentation/ioctl/ioctl-number.txt

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: move doc files Documentation/misc-devices/mei
Tomas Winkler [Wed, 9 May 2012 13:39:00 +0000 (16:39 +0300)]
mei: move doc files Documentation/misc-devices/mei

1. move mei.txt, TODO, and the example code under Documentation/misc-devices/mei
2. update the TODO file

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: export mei.h for the user space
Tomas Winkler [Wed, 9 May 2012 13:38:59 +0000 (16:38 +0300)]
mei: export mei.h for the user space

The header exports API for application layer

1. move under include/linux and add to  the export list
2. update include path n the sources
3. update TODO

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agouuid: add uuid.h to exported header list
Tomas Winkler [Wed, 9 May 2012 13:38:58 +0000 (16:38 +0300)]
uuid: add uuid.h to exported header list

uuid is used in mei.h interface

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: pci_probe/remove: use dev_err instead of printk(KERN_ERR
Tomas Winkler [Tue, 8 May 2012 20:04:56 +0000 (23:04 +0300)]
mei: pci_probe/remove: use dev_err instead of printk(KERN_ERR

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: use pr_err instead of printk(KERN_ERR
Tomas Winkler [Tue, 8 May 2012 20:04:55 +0000 (23:04 +0300)]
mei: use pr_err instead of printk(KERN_ERR

pr_ format is more compact and enable utilizing of pr_fmt macro

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: Remove test of is_broadcast with is_multicast
Joe Perches [Tue, 8 May 2012 17:11:56 +0000 (10:11 -0700)]
staging: Remove test of is_broadcast with is_multicast

A broadcast packet is a multicast packet, no need to test twice.

Reorder one defective test in rtl_core of is_multi_ether_addr
before is_broadcast_ether_addr as the is_multi returns true for
broadcast frames.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: line6/pcm.c: Removed trailing whitespace
Johannes Thumshirn [Sat, 5 May 2012 14:31:52 +0000 (16:31 +0200)]
staging: line6/pcm.c: Removed trailing whitespace

Removed a line of only whitespace

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: line6/midi.c: Added space between switch and open parenthesis
Johannes Thumshirn [Sat, 5 May 2012 14:31:51 +0000 (16:31 +0200)]
staging: line6/midi.c: Added space between switch and open parenthesis

Added space between switch and open parenthesis to make checkpatch.pl happy

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: line6/midibuf.c changed printk(KERN_DEBUG, ... to pr_debug(
Johannes Thumshirn [Sat, 5 May 2012 14:31:50 +0000 (16:31 +0200)]
staging: line6/midibuf.c changed printk(KERN_DEBUG, ... to pr_debug(

Changed printk(KERN_DEBUG, ...) call to pr_debug call in function
void line6_midibuf_status(struct MidiBuffer *this)

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: wlags49_h2: Fix spelling Endianess to Endianness in wlags49_h2
Masanari Iida [Sun, 6 May 2012 23:21:59 +0000 (08:21 +0900)]
staging: wlags49_h2: Fix spelling Endianess to Endianness in wlags49_h2

Correct spelling typo "Endianess" to "Endianness" in wlags49_h2.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rtl8712: Fix typos.
Justin P. Mattock [Mon, 7 May 2012 14:38:22 +0000 (07:38 -0700)]
staging: rtl8712: Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor sysfs files in comedi_fops.c
H Hartley Sweeten [Wed, 9 May 2012 16:20:08 +0000 (09:20 -0700)]
staging: comedi: refactor sysfs files in comedi_fops.c

Refactor the sysfs attributes and functions to remove
the need for the forward declarations and use the
DEVICE_ATTR macro to define them.

Instead of individually creating sysfs device attribute
files, wrap them in an attribute_group and use the
sysfs_create_group function to create them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: rtf520: las0, las1, and lcfg are void __iomem *
H Hartley Sweeten [Tue, 8 May 2012 23:27:55 +0000 (16:27 -0700)]
staging: comedi: rtf520: las0, las1, and lcfg are void __iomem *

The las0, las1, and lcfg variables in struct rtdPrivate are all
ioremap'ed pci resources and should be void __iomem *
not void *.

This quiets a lot of sparse warings for the writel and readl like:

warning: incorrect type in argument 1 (different address spaces)
   expected void const volatile [noderef] <asn:2>*addr
   got void *<noident>

warning: incorrect type in argument 2 (different address spaces)
   expected void volatile [noderef] <asn:2>*addr
   got void *

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: mite: mite_io_addr and daq_io_addr are void __iomem *
H Hartley Sweeten [Tue, 8 May 2012 23:19:34 +0000 (16:19 -0700)]
staging: comedi: mite: mite_io_addr and daq_io_addr are void __iomem *

The mite_io_addr and daq_io_addr variables in struct mite_struct
are both ioremap'ed pci resources and should be void __iomem *
not void *.

This quiets a lot of sparse warings for the write[lwb],read[lwb]
calls in the comedi mite drives like:

warning: incorrect type in argument 1 (different address spaces)
   expected void const volatile [noderef] <asn:2>*addr
   got void *<noident>

warning: incorrect type in argument 2 (different address spaces)
   expected void volatile [noderef] <asn:2>*addr
   got void *

It also exposed some warnings in the mite ni_660x driver where
the daq_io_address was getting cast as a void *const.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: rename addi CamelCase function pointers
H Hartley Sweeten [Mon, 7 May 2012 19:14:22 +0000 (12:14 -0700)]
staging: comedi: rename addi CamelCase function pointers

Rename the CamelCase variable names for the ADDI subdevice
functions. This makes the code a bit cleaner and easier to
follow.

This will also help with converting the struct addi_board
boardtypes array to C99 style initialization to help with
maintaining the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor dt2814 driver and use module_comedi_driver
H Hartley Sweeten [Sat, 5 May 2012 00:09:02 +0000 (17:09 -0700)]
staging: comedi: refactor dt2814 driver and use module_comedi_driver

Move the struct comedi_driver to the end of the source and refactor
the code to remove the forward declarations.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor dt282x driver to remove forward declarations
H Hartley Sweeten [Sat, 5 May 2012 00:02:38 +0000 (17:02 -0700)]
staging: comedi: refactor dt282x driver to remove forward declarations

Move the struct comedi_driver and variables to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor dt3000 driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 23:49:45 +0000 (16:49 -0700)]
staging: comedi: refactor dt3000 driver to remove forward declarations

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written.

Also, refactor a couple of the pci helper functions used during the
attach. The removes the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor dyna_pci10xx driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 23:31:58 +0000 (16:31 -0700)]
staging: comedi: refactor dyna_pci10xx driver to remove forward declarations

Move the struct comedi_driver and associated variables to the
end of the source. This is more typical of how other drivers are
written and removes the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor the icp_multi driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 23:19:26 +0000 (16:19 -0700)]
staging: comedi: refactor the icp_multi driver to remove forward declarations

Move the setup_channel_list function forward in the souce and the
struct comedi_driver and associated variables to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.

Remove the unnecessary comments for the attach/detach functions.

Change the initialization of struct boardtype to c99 syntax and
remove the comments.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor jr3_pci driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 22:57:24 +0000 (15:57 -0700)]
staging: comedi: refactor jr3_pci driver to remove forward declarations

Move the struct comedi_driver and associated variables to the
end of the source. This is more typical of how other drivers are
written and removes the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor me4000 driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 22:51:25 +0000 (15:51 -0700)]
staging: comedi: refactor me4000 driver to remove forward declarations

Move the struct comedi_driver, attach/detach functions, and
associated variables to the end of the source. This is more
typical of how other drivers are written and removes the need
for most of the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor me_daq driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 22:39:55 +0000 (15:39 -0700)]
staging: comedi: refactor me_daq driver to remove forward declarations

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor mpc624 driver and use module_comedi_driver
H Hartley Sweeten [Fri, 4 May 2012 22:33:17 +0000 (15:33 -0700)]
staging: comedi: refactor mpc624 driver and use module_comedi_driver

Move the struct comedi_driver and associated attach/detach
routines to the end of the source. This is more typical of how
other drivers are written and removes the need for the forward
declarations.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor mpc8260cpm driver and use module_comedi_driver
H Hartley Sweeten [Fri, 4 May 2012 22:26:44 +0000 (15:26 -0700)]
staging: comedi: refactor mpc8260cpm driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor multiq3 driver and use module_comedi_driver
H Hartley Sweeten [Fri, 4 May 2012 22:19:49 +0000 (15:19 -0700)]
staging: comedi: refactor multiq3 driver and use module_comedi_driver

Move the struct comedi_driver to the end of the source. Convert
the driver to use the module_comedi_driver() macro which makes
the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: partial refactor of s626 driver to remove forward declarations
H Hartley Sweeten [Fri, 4 May 2012 21:37:36 +0000 (14:37 -0700)]
staging: comedi: partial refactor of s626 driver to remove forward declarations

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ssv_dnp driver and use module_comedi_driver
H Hartley Sweeten [Fri, 4 May 2012 21:26:56 +0000 (14:26 -0700)]
staging: comedi: refactor ssv_dnp driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor unioxx5 driver and use module_comedi_driver
H Hartley Sweeten [Fri, 4 May 2012 18:50:57 +0000 (11:50 -0700)]
staging: comedi: refactor unioxx5 driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more typical
of how other drivers are written and removes the need for the
forward declarations.

Convert the driver to use the module_comedi_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: remove debug tracing in vmk80xx driver
H Hartley Sweeten [Fri, 4 May 2012 18:23:54 +0000 (11:23 -0700)]
staging: comedi: remove debug tracing in vmk80xx driver

The vmk80xx driver uses a non-existant Kconfig symbol to enable
function call debug tracing. This output is really just noise
and doesn't serve any useful purpose. Remove all it's uses in
the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: use module_comedi_driver
H Hartley Sweeten [Thu, 3 May 2012 22:09:40 +0000 (15:09 -0700)]
staging: comedi: use module_comedi_driver

Convert the refactored comedi drivers to use the module_comedi_driver()
macro which makes the code smaller and a bit simpler.

In the process, rename the driver variables from driver_* to *_driver,
as is more typical with other subsystems, and make sure they are all
static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: Fix typo in rts5139
Masanari Iida [Tue, 8 May 2012 18:06:46 +0000 (03:06 +0900)]
staging: rts5139: Fix typo in rts5139

Correct spelling typo in rts5139

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused card_power_off
Oleksij Rempel [Fri, 4 May 2012 15:14:37 +0000 (17:14 +0200)]
staging: rts5139: remove unused card_power_off

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused disable_card_clock
Oleksij Rempel [Fri, 4 May 2012 15:14:36 +0000 (17:14 +0200)]
staging: rts5139: remove unused disable_card_clock

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: make some functions static in rts51x_card.c and rts51x.c
Oleksij Rempel [Fri, 4 May 2012 18:02:46 +0000 (20:02 +0200)]
staging: rts5139: make some functions static in rts51x_card.c and rts51x.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove useless rts51x_sys.h
Oleksij Rempel [Fri, 4 May 2012 15:14:34 +0000 (17:14 +0200)]
staging: rts5139: remove useless rts51x_sys.h

and move USING_POLLING_CYCLE_DELINK to rts51x_chip.h

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused clear_first_install_mark
Oleksij Rempel [Fri, 4 May 2012 15:14:33 +0000 (17:14 +0200)]
staging: rts5139: remove unused clear_first_install_mark

it also removes rts51x_reset_detected_cards.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove disabled SCSI_SCAN_DELAY code
Oleksij Rempel [Fri, 4 May 2012 15:14:32 +0000 (17:14 +0200)]
staging: rts5139: remove disabled SCSI_SCAN_DELAY code

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove disabled XD_SPEEDUP code
Oleksij Rempel [Fri, 4 May 2012 15:14:31 +0000 (17:14 +0200)]
staging: rts5139: remove disabled XD_SPEEDUP code

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove disabled SUPPORT_SD_LOCK code.
Oleksij Rempel [Fri, 4 May 2012 15:14:30 +0000 (17:14 +0200)]
staging: rts5139: remove disabled SUPPORT_SD_LOCK code.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove unused LED_AUTO_BLINK code
Oleksij Rempel [Fri, 4 May 2012 15:14:29 +0000 (17:14 +0200)]
staging: rts5139: remove unused LED_AUTO_BLINK code

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove disabled code in rts51x_fop.*
Oleksij Rempel [Fri, 4 May 2012 15:14:28 +0000 (17:14 +0200)]
staging: rts5139: remove disabled code in rts51x_fop.*

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rts5139: remove disabled code in rts51x_scsi.c
Oleksij Rempel [Fri, 4 May 2012 15:14:27 +0000 (17:14 +0200)]
staging: rts5139: remove disabled code in rts51x_scsi.c

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>